esidel-2003-010 certificate v1.0 version2006 -...

ESIDEL(European Steel Industry Data Exchange Language)

Inventory switch

Version 1.0

by EDIFER «XML Business Group»March 2004

ESIDEL (European Steel Industry Data Exchange Language)

Certificate/Quality report Version 1.0

by EDIFER «XML Business Group» March 2006

ESIDEL - Definition of the Certificate / Quality report

1

Certificate / Quality report

By EUROFER - EDIFER Business Working Group

Creation date: 01 December 2003

Last update: 22 March 2006

Reference: ESIDEL-2003-010(Certificate v1.0).doc

Version: 1.0

Change of the code list “Certificate type code” due to the review of the standard EN 10204 applicable from April 2005.

- code 2.3 deleted - code 3.1.A replaced by code 3.2 - code 3.1.B replaced by code 3.1 - code 3.1.C replaced by code 3.2

The old and new codes are available to allow the users to migrate to the new code set as defined in the standard EN 10204-2004


2

Table of contents 1. Certificate / Quality report information ..........................................................3

1.1. GENERAL INFORMATION .......................................................................................................3 1.2 PRINCIPLES ...........................................................................................................................4 1.3 THE DIFFERENT USAGES OF THE MESSAGE.............................................................................4

2. Class diagram of the Certificate / Quality report ........................................7

2.1. CLASS DIAGRAM ENTITIES...................................................................................................13 2.2. DATA MODEL ATTRIBUTES ..................................................................................................16 2.3. ATTRIBUTE CODE LISTS.......................................................................................................33


3

1. Certificate / Quality report information

1.1. General information The Certificate / Quality report message is used to enable the transmission of the results of tests performed to satisfy a specified product or process requirement. These results appear in the inspection documents:

- Drawn up from inspection and tests carried out by personnel authorised by the manufacturer and who may be internal to the manufacturing department.

- Drawn up from inspection and tests carried out or supervised by authorised personnel independent of the manufacturing department, and based on specific testing requirements.

The different types of inspection documents supplied to the customer, in accordance with the requirements of the order, for the delivery of steel products are defined by the European Committee for Standardisation (CEN) in the document EN 10204.

A detailed description of the contents of each type of inspection report are specified by European Committee for Standardisation (CEN) in the document EN10168 "Iron and steel products - Inspection documents Contents". The function of the type of inspection document varies the content includes; - Commercial transactions and the parties involved, such as

- Manufacturer's works - Originator of the document - Customer / consignee - Customer's order number - Manufacturer's works order number - Despatch advice - Carrier - Means of transport

- Description of products to which the inspection document applies such as - Product description - Steel grade - Identification of the product - Article number - Product dimensions - Mass or weights - Package information - Number of pieces

- The test methods employed - Process data such as

- Steel making process - Hot rolling temperature - Coiling temperature


4

- Information on tests on the products such as

- Tensile - Hardness - Elongation - Chemical composition - Other tests

- Information on tests on the test pieces (samples) such as - Sample dimensions - Identification of the sample - Location of the sample - Direction of the sample - Test results

1.2 Principles

The Certificate / Quality report details may refer to a specific end product, or the semi-finished products from which the end product has been produced.

1.3 The different usages of the message

The Certificate / Quality report can be used to convey the information of any of the following inspection documents (defined in the EN10204 CEN Norm) or to provide quality data not related to an inspection document:

a. Certificate of compliance with the order '2.1'

Document in which the manufacturer certifies that the products supplied are in compliance with the requirements of the order, without mention of any test results. The contents of this message include; - Commercial transactions and the parties involved - Description of products to which the inspection document applies.

b. Test reports

Test report '2.2' Document in which the manufacturer certifies that the products supplied are in compliance with the requirements of the order and in which he supplies test results based on non-specific inspection and testing.


5

Specific test report '2.3' Document in which the manufacturer certifies that the products supplied are in compliance with the specifications of the order and in which he supplies test results based on specific inspection and testing. The specific test report '2.3' is only used by a manufacturer who does not have an authorised quality department operating independently of the manufacturing department The contents of this message include; - Commercial transactions and the parties involved - Description of the products to which the inspection document applies - Information on tests on the test pieces (samples)

(information on the origin of the samples is not required) and may include ; - The test methods employed - Process data

c. Inspection certificate

Document issued on the basis of inspection and tests carried out in accordance with the technical specifications of the order or the official regulations and the corresponding technical rules. The inspection unit is set by the product standard, the official regulations and corresponding technical rules or by the order. The different types of the inspection certificate are; Inspection certificate '3.1.A' This document is issued and validated by an inspector designated by the official regulations, in accordance with these and the corresponding technical rules. Inspection certificate '3.1.B' This document is issued by the department independent of the manufacturing department and validated by an authorised representative of the staff independent of the manufacturing department. Inspection certificate '3.1.C' This document is issued and validated by an authorised representative of the purchaser, in accordance with the specifications of the order. The contents of this message include;

- Commercial transactions and the parties involved - Description of the products to which the inspection document applies - Information on tests on the test pieces (samples) (information on the origin of the

samples is not required) - Information on tests on the products

and may include; - The test methods employed - Process data


6

d. Inspection report '3.2'.

When the inspection certificate is validated, following special agreement, both by the manufacturer's authorised representative and the purchaser's authorised representative, it is known as the inspection report '3.2'.

The contents of this message include; - Commercial transactions and the parties involved - Description of the products to which the inspection document applies - Information on tests on the test pieces (samples) (information on the origin of the

samples is not required) - Information on tests on the products and may include ; - The test methods employed - Process data

e. Report quality data.

This is the case when the customer and the supplier agreed that the supplier provides quality data not related to an inspection document. This can be the case: - When together with the Goods ready for despatch message the customer wants to give

some basic product information about the chemical and mechanical properties - When the supplier is not providing inspection documents - For hire working purposes.


7

2. Class diagram of the Certificate / Quality report

Has other test as

Has carrier as

Has transport information as

Has ultrasonic tests as

Has heat information as

Has manufacturer as

Has material unit as

Has mechanical tests as

Has item specification details as

Has process specification as

Certificate

0..1

Material item

- Material identification number - Material identification number manufacturer - Production date - Gross weight of the product unit - Net weight of the product unit - Quantity (0..N) - Batch number - Country of origin code - Country of origin name - Despatch advice number - Packing list number - Material item free text

1

Has product specification as

Party details

See details on the next page

1

1

1

1

1 1 1

0..1

0..1

0..1

0..1

1..N

0..1

0..1

1

Has consignee as

Has consignor as

1

1

1

1

1

0..1

0..1

0..1

0..1

Item specification details


Has certifying party as

Has outside inspection agency as

1

- Certificate number - Certificate date/time - Certificate type code - Order number customer - Order item number customer - Order number consignee - Order item number consignee - Order number supplier - Order item number supplier - Originator of the document - Delivery terms - Delivery terms location - Delivery conditions - Certificate free text

Heat

- Heat number - Date of Heat

1

0..N

Chemical composition


Has chemical properties as

Mechanical tests


Product specification


Process specification


Has chemical composition as

Ultrasonic tests


1

0..1

Transport information

- Transport means description code - Transport means description - Transport means identification

1

0..1

1

0..1

Magnetic tests


1

0..1

Has magnetic tests as

Other test


1

0..N

0..1 Has seller as

Has customer as


8

Detailed Class diagram of the Party details Detailed Class diagram of the Item specification details

Has an additional steel grade as

Has product classification to

Has references to

Has a dimension as

Has a steel grade as

Has structured address details as

Has postbox details as

Has contact details as

Party Identification

Contact details

- Contact name - Contact function code - Contact Identifier - Telephone number - Extension number - Mobile telephone number- Fax number - E-mail address

- Responsible agency - Party identification, coded

Additional Identification

0..N

- Building name - Street name - District name - District sub-division name - Postal code - City name - State or Province name - Country code - Country name - Location identifier

Address – Structured details

Has additional identification as

0..N

1

0..1

- Party name - Responsible agency - Party identification, coded

- Address line 1 - Address line 2 - Address line 3 - Address line 4 - Address line 5 - Postal code - City name - State or Province name - Country code - Country name - Location identifier

Address – Unstructured details

- Post office box - Postal code - City name - Country code - Country name

Address – Postbox details

1

Has unstructured address details as

1

1

1

0..1

0..1

PARTY DETAILS

Item identification

- Customers article number - Suppliers article number - Article description

Item reference

- Reference code qualifier - Reference number - Reference date

Product classification

- Product group coded - Product category coded - Product sub-category coded - Product form coded - Product shape coded - Rolling family - Product designation

ITEM SPECIFICATION

- Steel grade standard name - Steel grade standard country code - Steel grade standard year of issue - Steel grade name - Steel grade number - Temper - Steel type

Steel grade designation

Product dimensions

- Dimension type - Dimension value - Dimension minimum value - Dimension maximum value

1

1

1

0..N

0..N

0..1

0..1

1

1 0..N

- Registered trade mark name - Registered trade mark steel grade name

1

Has trade mark as

0..1

1

Has additional trade mark as

0..N

Registered trade mark


9

Detailed Class diagram of the Chemical composition Detailed Class diagram of the Mechanical tests (part 1)

CHEMICAL COMPOSITION

- Chemical formula code - Target minimum value - Target maximum value - Measured value

Chemical formula

- Chemical element code - Target minimum value - Target maximum value - Measured value

Chemical element

- Carbon equivalent code - Customer Carbon equivalent formula - Target minimum value - Target maximum value - Measured value

Carbon equivalent formula

MECHANICAL TESTS – part 1

- Anisotropy test standard - Sample number - Sample position across width - Sample position along length

Anisotropy test

1

- Tensile test standard - Sample number - Sample position across width - Sample position along length - Sample position through thickness

Tensile test

- Hardness test standard - Sample number - Sample position across width - Sample position along length - Sample position through thickness

Hardness test

0..N 0..N 1..N

0..3

- Sample direction code - Test temperature - Steel condition - Sample type code - Basis distance for elongation Lo - Measurement conditions

Tensile test condition

- Method code - Yield strength value - Ultimate tensile strength value - Elongation value - Uniform elongation value - Area reduction value - Ratio ReRm - Strain hardening ratio - Anisotropy coefficient - Elongation x Ultimate tensile strength

Tensile test characteristics

1

1

1

1

- Measurement method - Steel condition

Anisotropy test condition

- Method code - Average hardening ratio - Average anisotropy coefficient - Planar anisotropy coefficient -

Anisotropy test characteristics

1

0..1

1

1

- Hardness type - Steel condition

Hardness test condition

- Method code - Hardness value

Hardness test characteristics

1

1

1

0..1 0..3


10

Detailed Class diagram of the Mechanical tests (part 2) le Detailed Class diagram of the Magnetic tests / Ultrasonic tests

ULTRASONIC TESTS

MECHANICAL TESTS – part 2

- Notch toughness test standard - Sample number - Sample position across width - Sample position along length - Sample position through thickness

Notch toughness test

1

- Bending test standard - Sample number - Sample position across width - Sample position along length

Bending test

- Bake hardening test standard - Sample number - Sample position across width - Sample position along length - Sample position through thickness

Bake hardening test

- Steel condition - Bending radius ratio to thickness - Bending angle

Bending test condition

- Method code - Bending direction - Bending minimum ratio x thickness

Bending test characteristics

1

0..1

1

1

- Sample size - Sample direction code - Notch shape - Steel condition - Aging duration - Strain aging temperature - Test temperature

Notch toughness test condition

- Method code - Individual energy value (0..3) - Average energy value - Individual percent shear fracture (0..3) - Average percent shear fracture - Lateral spreading (0..3)

Notch toughness test characteristics

1

0..1

1

1

- Sample direction code

Bake hardening test condition

- Method code - BH0 value - BH2 value - WH value

Bake hardening test characteristics

1

0..1

1

0..3 0..3

MAGNETIC TESTS

1

- Magnetic test standard

Magnetic test

- Ultrasonic test standard - Ultrasonic supplementary requirement (0..N) - Ultrasonic level of quality - Ultrasonic test position

Ultrasonic test

- Frequency value

Magnetic test condition

- Magnetic field value - Induction value

Induction

1

1

1

- Induction value - Loss value

Loss

0..3 0..2

0..1 0..N

0..3

- Method code

Magnetic test characteristics 1 1


11

Detailed Class diagram of the Product specification Detailed Class diagram of the Process specification

PRODUCT SPECIFICATION

- Crown tolerance standard - Tolerance application code

Crown standard

- Camber tolerance standard - Tolerance application code

Camber standard

- Max deviation value

Out of squareness

- Oil status code - Oil type - Oil reference free text - Oil quantity code

Oiling - Weld type code - Number of welds - Weld identification type code - Weld bead trimming code - Weld bead annealing code

Weld information

- Organic coating trade name - Suppliers organic coating name - Base material

Organic coating system

1

- Metallic coating type - Metallic coating quantity - Single spot thickness value - Triple spot thickness value

0..1 0..1

- Flatness tolerance standard - Tolerance application code

Flatness standard

0..1

0..1

0..1

0..2

- Marking side position - Marking mode - Marking content code - Marking position - Marking content free text

Marking

0..1

0..1

- Metallic coating standard name - Metallic coating code - Metallic spangle code

Metallic Coating standard

0..1

- Chemical element coded - Target minimum value - Target maximum value - Measured value

Chemical element

1..N

0..1

Product specification per side

- Number of the side and see other

details on the next page

0..2

PROCESS SPECIFICATION

- Heat treatment process type - Skin pass process type - Rolling direction - Presented side position code - Thickness including metallic coating indicator

Process

- Temperature minimum value - Temperature maximum value - Temperature value

Coiling temperature

0..1 0..1

- Dimension type - Dimension value - Dimension minimum value - Dimension maximum value - Tolerance in plus - Tolerance in minus

0..N

Has a material dimension as

- Tolerance standard - Tolerance application code - Tolerance positioning code

Dimension tolerance standard

Dimensions

0..1

1

Camber

- Maximum deviation - Measurement length

Camber tolerance

- Position from the edge value - Crown value

Crown tolerance

Crown

1

1

1

1

0..1

0..1

0..1

0..1

- Maximum deviation value - Length of reference - Max ratio of wave height - Max wave height - Max number of peaks

Flatness tolerance Flatness

1

1

0..1

0..1

Has symmetric metallic coating as

Metallic coating

- Temperature minimum value - Temperature maximum value - Temperature value

Rolling temperature

0..1


12

Detailed Class diagram of the Product specification by side Detail Class diagram of other test

1

PRODUCT SPECIFICATION PER SIDE

- Chemical surface treatment type - Chemical surface treatment quantity code

Chemical surface treatment

- Surface classification standard - Surface classification

Surface classification

- Roughness process - Roughness standard name - Roughness level code

Roughness

- Thin organic coating type

Thin organic coating

- Gloss value

Gloss

1

- Organic coating trademark name - Resin type - Resin trademark name - Resin description - Tint standard - Tint code - Nominal thickness - Single spot thickness value - Triple spot thickness value - Removable protective film type - Protective film free edge width - Embossing code

Organic coating

0..1 0..1 0..1

0..1

0..1

- Cut off value code - Measurement length - RA value

Roughness test characteristics - Layer rank - Resin type - Resin trademark name - Tint standard - Tint code

Layer

0..4

1

0..2

- Threshold value - Measurement length - Number of peaks

Peak test characteristics

1

0..2

1

- Metallic coating type - Metallic coating quantity - Single spot thickness value - Triple spot thickness value

Metallic coating

0..1

- Chemical element coded - Target minimum value - Target maximum value - Measured value

Chemical element

1..N

1

0..1

- Name of the test - Sample number - Sample position across width - Sample position along length - Sample position through thickness

Other test

- Method code - Test characteristic identification - Test characteristic value

Test characteristics

1

1..N

OTHER TEST

- Test condition identification - Test condition value

Additional test condition

1

0..N

- Sample direction - Temperature - Steel condition

Test condition

1

0..1

- Foil code - Foil thickness

Foil

1

0..4

- Name of the test - Organic coating test

standard

Organic coating test

0..N

- Test condition identification - Test condition value

Test condition

1

0..N

- Method code - Test characteristic identification - Test characteristic value


1

1..N


13

2.1. Class diagram entities The following entities are contained within the data model.

Entity Description

Certificate The entity contains the identification, the date and information relevant for the certificate or quality report.

Material item The entity contains the information of each material item in the certificate, such as the material identification, the weight, the quantity.

Transport information The entity contains the transport means and the transport means identification.

Heat The entity contains the heat number of the material items present in the certificate.

Classes part of Party Details Party identification The entity contains the name and the prime identification of a

party. Additional identification The entity contains the additional identification of a party. Address - unstructured details The entity contains the details of the address in the unstructured

format. Address - structured details The entity contains the details of the address in the structured

format. Address – post box details The entity contains the details of the post office box. Contact details The entity contains the contact details of a person or a department

of a party. Classes part of Item specification Details Item identification The entity contains the global information of a item, such as the

identification number, and some product details. Item reference The entity contains the identification of the references of the

article identified in Item identification. Product classification The entity contains the specifications of the product classification. Registered trade mark The entity contains the registered trade mark information. Steel grade designation The entity contains the steel grade information. Product dimensions The entity specifies the dimension details such as the type (e.g.

length, width, thickness) and the value of the dimension. Classes part of Chemical composition Chemical element The entity contains the information about a chemical element. Chemical formula The entity contains the information about a chemical formula. Carbon equivalent formula The entity contains the information about a carbon equivalent

formula.. Classes part of Mechanical tests Tensile test The entity contains the information about the test standard and the

sample position of the tensile test. Tensile test condition The entity contains the information about the test condition during

the tensile test. Tensile test characteristics The entity contains the test values of the tensile test. Anisotropy test The entity contains the information about the test standard and the

sample position of the anisotropy test. Anisotropy test condition The entity contains the information about the test condition during

the anisotropy test. Anisotropy test characteristics The entity contains the test values of the anisotropy test.


14

Entity Description

Classes part of Mechanical tests Hardness test The entity contains the information about the test standard and the

sample position of the hardness test. Hardness test condition The entity contains the information about the test condition during

the hardness test. Hardness test characteristics The entity contains the test values of the hardness test. Bending test The entity contains the information about the test standard and the

sample position of the bending test. Bending test condition The entity contains the information about the test condition during

the bending test. Bending test characteristics The entity contains the test values of the bending test. Notch toughness test The entity contains the information about the test standard and the

sample position of the notch toughness test. Notch toughness test condition The entity contains the information about the test condition during

the notch toughness test. Notch toughness test characteristics The entity contains the test values of the notch toughness test. Bake hardening test The entity contains the information about the test standard and the

sample position of the bake hardening test. Bake hardening test condition The entity contains the information about the test condition during

the hardening test. Bake hardening test characteristics The entity contains the test values of the bake hardening test. Classes part of Magnetic tests Magnetic test The entity contains the information about the test standard of the

magnetic test. Magnetic test condition The entity contains the information about the test condition during

the magnetic test. Magnetic test characteristics The entity contains the test values of the magnetic test. Loss The entity contains the test values of the magnetic losses. Induction The entity contains the test values of the magnetic induction. Classes part of the Ultrasonic tests Ultrasonic test The entity contains the information about the test standard and

characteristics of the ultrasonic test. Classes part of Product specification Camber The entity contains the camber standard and characteristics. Camber standard The entity contains the information of the camber standard. Camber tolerance The entity contains the camber tolerances. Crown The entity contains the crown standard and characteristics. Crown standard The entity contains the information of the crown standard. Crown tolerance The entity contains the crown tolerances. Flatness The entity contains the flatness standard and characteristics. Flatness standard The entity contains the information of the flatness standard. Flatness tolerance The entity contains the flatness tolerances. Out of squareness The entity contains the out of squareness characteristics. Dimensions The entity specifies the dimension details such as the type (e.g.

length, width, height), the measure unit and the value of the dimension.

Dimension tolerance standard The entity specifies the requested tolerance standard and the application of the tolerances specified in the standard.

Oiling The entity contains the information about the oiling. Welding information The entity contains the information of the welds. Metallic coating standard The entity contains the information of the standard used to specify

the metallic coating. Metallic coating The entity contains the information about the symmetric double-

face metallic coating. Chemical element The entity contains the information about a chemical element. Marking The entity contains the marking information. Organic coating system The entity contains the information about the organic coating

system.


15

Entity Description

Classes part of Process specification Coiling temperature The entity contains the information about the coiling temperature. Rolling temperature The entity contains the information about the hot rolling

temperature. Process The entity contains the information of the different processes. Classes part of Product specification by side Product specification by side The entity contains the information of the product specification by

side. Surface classification The entity contains the surface classification characteristics of the

top layer. Chemical surface treatment The entity contains the information of the chemical surface

treatment. Thin organic coating The entity contains the information about the thin organic coating..Roughness The entity contains the information of the roughness process used,

the standard and the roughness level within the standard. Roughness test characteristics The entity contains the test values of the roughness. Peak test characteristics The entity contains the test values of the peaks. Metallic coating The entity contains the information about the metallic coating. Chemical element The entity contains the information about a chemical element. Organic coating The entity contains the information about the organic coating. Gloss The entity contains the information about the gloss of the top

layer. Foil The entity contains the information of the foil. Layer The entity contains the information of each layer of the organic

coating. Organic coating test The entity contains the information of the organic coating test. Test condition The entity contains the test conditions of the organic coating test. Test characteristics The entity contains the test characteristics of the organic coating

test. Classes part of Other test Other test The entity contains the information about the name and the sample

position of the test. Test condition The entity contains the test conditions of the test. Additional test condition The entity contains the additional test conditions of the test. Test characteristics The entity contains the test characteristics of the test.


16

2.2. Data model attributes For each entity specified a list of attributes and a description is given.

Remark: Based on the Core Component Types (CCT) specified in the UN/CEFACT Core Components Technical Specifications (CCTS), the CCT supplementary components such as Date Time format, Amount currency code, Measure unit code and Quantity unit code are not mentioned as attributes.

Certificate

Attributes Description Code list Data type

Certificate number The unique number given by the supplier to identify a certificate or a quality report.

M an..35

Certificate date/time The date/time when the certificate or quality report is issued by the supplier

M an..35

Certificate type code The code identifying the certificate type. Yes C an..3 Order number customer The unique number given by the customer to

identify a order. C an..35

Order item number customer The unique number given by the customer to identify a order item within a order message.

C an..6

Order number consignee The unique number given by the consignee to identify a order.

C an..35

Order item number consignee The unique number given by the consignee to identify a order item within a order message.

C an..6

Order number supplier The unique number given by the supplier to identify a order.

C an..35

Order item number supplier The unique number given by the supplier to identify a order item within a order message.

C an..6

Originator of the document The name of the inspection organisation or the qualified department of the manufacturer.

C an..256

Delivery terms coded The code identifying the delivery terms. Yes C an..3 Delivery terms location The place of delivery linked to the Delivery terms

coded. C an..70

Delivery conditions The description of the product in the as-delivered condition, if it is different from the technical delivery conditions.

C an..999

Certificate free text Text giving additional information about the certificate or quality report..

C an..999

Material item


Material identification number Identification number assigned by the supplier to a material item.

M an..17

Material identification number manufacturer

Identification number assigned by the manufacturer to a material item.

C an..17

Production date The date when the material item was produced. C an..35 Gross weight of the product unit The total gross weight of the material item. C n..15 Net weight of the product unit The total net weight of the material item. C n..15 Quantity (0..N) The quantity of the material item C n..15 Batch number The unique number identifying a batch of material

items C an..35


17

Material item


Country of origin code The Country code specified in ISO 3166 – 1993 (2 alpha positions) of the country of origin

C an..2

Country of origin name The name of the country of origin. C an..35 Despatch advice number The unique number given by the consignor to

identify a despatch advice. C an..35

Packing list number The unique number given by the consignor to identify a packing list.

C an..35

Material free text Text giving additional information about the material item.

C an..999

Transport Information


Transport means description code The code specifying the means of transport. Yes C an..8 Transport means description The free form description of the means of transport. C an..17 Transport means identification The identification of the means of transport (e.g.

license plate of the lorry, wagon number, name of the vessel).

C an..35

Heat


Heat number The unique number identifying a heat or cast.. M an..35 Date of heat The date/time when the heat was produced. C an..35

Classes part of Party Details

Party identification


Party name The name of the party involved in a transaction. C an..35 Responsible agency The code identifying the agency responsible for the

attribution of the identification. Yes M an..3

Party identification, coded The code identifying a party involved in a transaction.

M an..35

Additional i.d. identification


Responsible agency The code identifying the agency responsible for the attribution of the identification.

Yes M an..3

Party identification, coded The code identifying a party involved in the transaction.

M an..35


18

Address - Unstructured details


Address line 1 The first line of the address. M an..35 Address line 2 The second line of the address. C an..35 Address line 3 The third line of the address. C an..35 Address line 4 The fourth line of the address. C an..35 Address line 5 The fifth line of the address. C an..35 Postal code The national postal code (ZIP code) of the address. C an..17 City name The name of a city. C an..35 State or province name The name of a state or province in a country. C an..35 Country Code The Country code specified in ISO 3166 – 1993

(2 alpha positions) C an..2

Country name The name of the country. C an..35 Location identifier The unique identification of a location based on the

Duns (Duns & Bradstreet) number of the company followed by four numeric digits.

C an..35

Address - Structured details


Building name The name of a building. C an..70 Street name The name of a street. C an..70 District name The name of a part of a city. C an..35 District sub-division name The name of a sub-division of a district of a city.. C an..35 Postal code The national postal code (ZIP code) of the address. C an..17 City name The name of a city. C an..35 State or province name The name of a state or province in a country. C an..35 Country Code The Country code specified in ISO 3166 – 1993


Country name The name of the country. C an..35 Location identifier The unique identification of a location based on the

Duns (Duns & Bradstreet) number of the company followed by four numeric digits.

C an..35

Address – Post box details


Post office box The post office box identifier. M an..17 Postal code The national postal code (ZIP code) of the address. M an..17 City name The name of a city. C an..35 State or province name The name of a state or province in a country. C an..35 Country Code The Country code specified in ISO 3166 – 1993


Country name The name of the country. C an..35


19

Contact data


Contact name The Name of a contact person or department. M an..35 Contact function code The code specifying the function of a contact (e.g.

department or person). Yes C an..3

Contact Identifier The unique identifier of a contact person or department

C an..35

Telephone number The telephone number including the country code. C an..35 Extension number The number of the telephone extension. C an..35 Mobile telephone number The mobile telephone number including the country

code. C an..35

Fax number The facsimile number including the country code. C an..35 E-mail address The email address. C an..512

Classes part of Item specification Details

Item identification


Customers article number The unique number given by the customer to identify an article

C an..35

Suppliers article number The unique number given by the supplier to identify an article

C an..35

Article description The textual description of an article. C an..999

Registered trade mark


Registered trade mark The identification of a trade mark of a steel grade. C an..35 Registered trade mark steel grade name

Name of a steel grade of a registered trade mark. C an..35

Item reference


Reference qualifier The code qualifying a reference. Yes M an..3 Reference number Unique number to identify the reference. M an..35 Reference date Issue date of the reference. C an..35


20

Product classification


Product group code Code specifying the steel product mean group (long products, flat carbon steel products, ….)

Yes M an..35

Product category code Code identifying the main condition category of steel products (rolled, heat treated, drawn, rolled..).

Yes M an..35

Product sub-category code Code identifying the sub category of the main condition category of steel products.

Yes C an..35

Product form code Code identifying the product form of steel products. Yes C an..35 Product shape code Code identifying the product shape of steel

products. Yes C an..35

Rolling family The text identifying the rolling family of steel products.

C an..70

Product designation, coded The text identifying the product designation of steel products.

C an..70

Steel grade designation


Steel grade standard name The identification of a steel grade standard. C an..35 Steel grade standard country code The identification of the country issuing the steel

grade standard. Yes C an..3

Steel grade standard year of issue The year of issue of the steel grade standard. C an..4 Steel grade name Name of a steel grade of a steel grade standard. C an..35 Steel grade number Identification number assigned to a steel grade

name of a steel grade standard C an..35

Temper Code specifying the level of mechanical properties aimed by the customer (used for packaging steel).

Yes C an..35

Steel type Code specifying the level of chemical properties aimed by the customer (used for packaging steel).

Yes C an..35

Product dimensions


Dimension type Code specifying the type of a dimension (height, width,…).

Yes M an..3 or an..35

Dimension value The value of a dimension. C n..18 Dimension minimum value The minimum value of a dimension. C n..18 Dimension maximum value The maximum value of a dimension. C n..18

Classes part of Item Chemical composition

Chemical element


Chemical element code The identification of the chemical element. M an..3 Target minimum value The minimum target value of the chemical element C n..18 Target maximum value The maximum target value of the chemical element C n..18 Measured value The measured value of the chemical element. C n..18


21

Chemical formula


Chemical formula code The identification of the chemical formula. M an..3 Target minimum value The minimum target value of the chemical formula. C n..18 Target maximum value The maximum target value of the chemical formula. C n..18 Measured value The measured value of the chemical formula. C n..18

Carbon equivalent formula


Carbon equivalent formula code The identification of the carbon equivalent formula. C an..3 Customer carbon equivalent formula

The carbon equivalent formula specified by the customer.

C an..256

Target minimum value The minimum target value of the carbon equivalent formula.

C n..18

Target maximum value The maximum target value of the carbon equivalent formula

C n..18

Measured value The measured value of the carbon equivalent formula..

C n..18

Classes part of Mechanical tests

Tensile test


Tensile test standard The name of the tensile test standard. C an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7

Sample position along length The code giving the sample position along product length.

Yes C n..7

Sample position through thickness

The code giving the sample position through thickness (suitable for products thicker than 10 mm).

Yes C n..7

Tensile test condition


Sample direction code The direction in which the sample is taken out from the product.

Yes C an..3

Test temperature The temperature of the sample during the test. C n..18 Steel condition The code specifying the steel condition of the

sample during the test. Yes M an..3

Sample type code The code specifying the sample type. Yes M an..3 Basis distance for elongation (L0) The distance between the two measuring point for

the elongation. C n..18

Measurement conditions The code identifying the conditions under which the yield strength values are measured.

Yes C an..3


22

Tensile test characteristics


Method code The method used to provide the test characteristics. Yes C an..3 Yield strength value The value of the Yield strength (Re). C n..18 Ultimate tensile strength value The value of the tensile strength (Rm).. C n..18 Elongation value The value of the elongation (A%). C n..18 Uniform elongation value The value of the uniform elongation. C n..18 Area reduction value The value of the reduction in area (%). C n..18 Ratio ReRm The value of the ratio Re/Rm. C n..18 Strain hardening ratio The value of the strain hardening ratio. C n..18 Anisotropy coefficient The value of the anisotropy coefficient ®. C n..18 Elongation x Ultimate tensile strength

The value of the elongation multiplied with the value of the ultimate tensile strength.

Yes C n..7

Anisotropy test


Anisotropy test standard The name of the anisotropy test standard. C an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7


Yes C n..7

Anisotropy test condition


Measurement method The code identifying the method for the measurement of the anisotropy.

Yes C an..3

Steel condition The code specifying the steel condition of the sample during the test.

Yes C an..3

Anisotropy test characteristics


Method code The method used to provide the test characteristics. Yes C an..3 Average hardening ratio The value of the average hardening ratio. C n..18 Average anisotropy coefficient The value of the average anisotropy coefficient. C n..18 Planar anisotropy coefficient The value of the planar anisotropy coefficient. C n..18

Hardness test


Hardness test standard The name of the hardness test standard. C an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7


Yes C n..7



Yes C n..7


23

Hardness test condition


Hardness type The code identifying the type of hardness test. Yes M an..3 Steel condition The code specifying the steel condition of the


Hardness test characteristics


Method code The method used to provide the test characteristics. Yes C an..3 Hardness value The value of the hardness. M n..18

Bending test


Bending test standard The name of the bending test standard. C an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7


Yes C n..7

Bending test condition


Steel condition The code specifying the steel condition of the sample during the test.

Yes M an..3

Bending radius ratio to thickness Bending radius ratio to thickness C n..18 Bending angle The value of the bending angle used during the test. C n..18

Bending test characteristics


Method code The method used to provide the test characteristics. Yes C an..3 Bending direction The code specifying the bending direction. Yes M an..3 Bending minimum ratio x thickness

The value of the bending radius multiplied with the thickness.

M n..18

Notch toughness test


Notch toughness test standard The name of the notch toughness test standard. C an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7


Yes C n..7


The code giving the sample position through thickness (suitable for products thicker than 10mm).

Yes C n..7


24

Notch toughness test condition


Sample size The code identifying the standard of the sample size used..

Yes C an..3


Yes M an..3

Notch shape The code identifying the notch shape. Yes C an..3 Steel condition The code specifying the steel condition of the


Aging duration The aging time in minutes. C n..18 Strain aging temperature The strain aging temperature (baking temperature). C n..18 Test temperature The temperature of the sample during the test. C n..18 Notch toughness test characteristics


Method code The method used to provide the test characteristics. Yes C an..3 Individual energy value (0..3) The value of the energy absorbed. C n..18 Average energy value The value of the average energy absorbed. C n..18 Individual percent shear fracture (0..3)

The value of the minimum percent shear fracture. C n..18

Average percent shear facture The value of the average percent shear fracture. C n..18 Lateral spreading (0..3) The difference between the width measured on the

broken sample the original width C n..18

Bake hardening test


Bake hardening test standard The name of the bake hardening test standard. C an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7


Yes C n..7


The code giving the sample position through thickness (suitable for products thicker than 10mm).

Yes C n..7

Bake hardening test condition



Yes M an..3

Bake hardening test characteristics


Method code The method used to provide the test characteristics. Yes C an..3 BH0 value Bake hardening value without a preliminary strain

load on the sample (BH0) C n..18

BH2 value Bake hardening value with a preliminary strain load of 2% on the sample (BH2).

C n..18

WH value Work hardening due to pre-straining C n..18


25

Classes part of Magnetic tests

Magnetic test


Magnetic test standard The name of the magnetic test standard. C an..256

Magnetic test condition


Frequency value The value of the electrical frequency. M n..18

Magnetic test characteristics


Method code The method used to provide the test characteristics. Yes C an..3

Loss


Induction value The value of the induction. M n..18 Loss value The value of magnetic loss. M n..18

Induction


Magnetic field value The value of the magnetic field. M n..18 Induction value The value of the induction. M n..18

Classes part of Ultrasonic tests

Ultrasonic test


Ultrasonic test standard The name of the ultrasonic test standard. C an..256 Ultrasonic supplementary requirements (0..n)

The text identifying the supplementary requirements specified in the Ultrasonic test standard.

C an..256

Ultrasonic level of quality (0..n) The text describing the level of quality specified in the Ultrasonic test standard.

C an..256

Ultrasonic test position The text specifying the test position within the product.

C an..256


26

Classes part of Product specification

Camber standard


Camber tolerance standard The name of the camber tolerance standard. M an..256 Tolerance application code The code identifying the application of the

tolerance standard. Yes C an..3

Camber tolerance


Maximum deviation The value of the maximum camber deviation within the measurement length;

M n..18

Measurement length The value of the measurement length. M n..18

Crown standard


Crown tolerance standard The name of the crown tolerance standard. M an..256 Tolerance application code The code identifying the application of the


Crown tolerance


Position from edge value The value of the position from the edge to specify the crown value.

M n..18

Crown value The value of the crown. M n..18

Flatness standard


Flatness tolerance standard The name of the flatness tolerance standard. M an..256 Tolerance application code The code identifying the application of the


Flatness tolerance


Maximum deviation value The value of the maximum deviation over the reference length.

M n..18

Length of reference The value of the referenced length. C n..18 Maximum ratio of wave height The value of the maximum ratio of wave height

over the referenced length C n..18

Maximum wave height The value of the maximum height of a wave. M n..18 Maximum number of peaks The maximum number of peaks within the

referenced length. C n..18


27

Out of squareness


Maximum deviation value The value of the maximum deviation of squareness. C n..18

Dimensions


Dimension type Code specifying the type of a dimension (height, width,…).

Yes M an..3 or an..35

Dimension value The value of a dimension. C n..18 Dimension minimum value The minimum value of a dimension. C n..18 Dimension maximum value The maximum value of a dimension. C n..18 Tolerance in plus The maximum tolerance value (delta) in the

dimension unit in plus. C n..18

Tolerance in minus The maximum tolerance value (delta) in the dimension unit in minus.

C n..18

Dimension tolerance standard


Tolerance standard The name of the dimension tolerance standard to qualify the dimensional tolerances.

M an..35

Tolerance application code The code identifying the application of the tolerance of the standard.

Yes C an..8

Tolerance positioning code The code specifying if the tolerance values are applied over, under the nominal value or symmetrical.

Yes C an..8

Oiling


Oiling status code The code specifying the oiling status. Yes M an..3 Oiling type The code specifying the type of oil. Yes C an..3 Oiling reference free text The text to specify the oiling. C an..999 Oiling quantity code The code specifying the quantity of oiling. Yes C an..3 Weld information


Weld type code The code indicating if welding is performed before or after rolling.

Yes M an..3

Number of welds The number of welds. M n..18 Weld identification type code The code specifying the type of weld identification. Yes C an..3 Weld bead trimming code The code specifying the type of trimming of the

weld bead. Yes C an..3

Weld bead annealing code The code specifying the type of annealing of the weld bead.

Yes C an..3


28

Metallic coating standard


Metallic coating standard name The name of the metallic coating standard. M an..256 Metallic coating code The code identifying the metallic coating

designation of the metallic coating standard. C an..70

Metallic spangle code The code specifying the spangle for hot dip galvanised coating.

Yes C an..3

Metallic coating


Metallic coating type The code specifying the metallic coating type. Yes M an..7 Metallic coating quantity The value of the metallic coating quantity. M n..18 Single spot thickness value The value of the single spot thickness of the

metallic coating on both sides. C n..18

Triple spot thickness value The value of the triple spot thickness of the metallic coating on both sides.

C n..18

Chemical element



Marking


Marking side position The product side number on which the marking is performed.

Yes M an..3

Marking mode The code identifying the marking mode. Yes M an..3 Marking content code The code identifying the marking content. Yes C an..3 Marking position The code identifying the position of the marking

across the width. Yes M an..3

Marking content free text The marking text on the product. C an..256

Organic coating system


Organic coating trade name The name of the trade mark of the Organic coating. C an..256 Suppliers organic coating name The name of the organic coating of the supplier. C an..256 Base material The code identifying the sub-category of the base

material of organic coated products. Yes M an..35


29

Classes part of Process specification

Coiling temperature


Temperature minimum value The value of the minimum temperature. C n..18 Temperature maximum value The value of the maximum temperature. C n..18 Temperature The value of the temperature. C n..18

Rolling temperature


Temperature minimum value The value of the minimum temperature. C n..18 Temperature maximum value The value of the maximum temperature. C n..18 Temperature The value of the temperature. C n..18

Process


Heat treatment process type The code identifying the heat treatment process. Yes C an..3 Skin pass process type The code identifying the skin pass process. Yes C an..3 Rolling direction The code identifying the rolling direction. Yes C an..3 Presented side position code The code identifying which side is presented on the

top or on the outside for coils. Yes C an..1

Thickness including metallic coating indicator

The indicator that the product thickness includes the metallic coating thickness.

C an..1

Classes part of Product specification by side


Number of side The number attributed to the side of the product. M an..1

Surface classification


Surface classification standard The name of the surface classification standard. M an..256Surface classification The name of the surface classification. M an..256

Chemical surface classification


Chemical surface treatment type The code specifying the chemical treatment used on the product surface.

Yes M an..3

Chemical surface treatment quantity code

The code specifying the quantity of chemical treatment used on the product surface.

Yes C an..3


30

Roughness


Roughness process The code specifying the process used to obtain the product roughness.

Yes C an..3

Roughness standard name The name of the roughness standard. M an..256 Roughness level code The code specifying the roughness level within the

roughness standard. C an..70

Roughness test characteristics


Cut off value code The code indicating the roughness cut off value in microns.

Yes M an..3

Measurement length The value of the measurement length. C n..18 RA value The value of the RA. M n..18

Peak test characteristics


Threshold value The value of the threshold. M n..18 Measurement length The value of the measurement length. M n..18 Number of peaks The number of peaks within the measurement

length. M n..18

Thin organic coating


Thin organic coating type The code specifying the type of thin organic coating.

Yes C an..3

Metallic coating


Metallic coating type The code specifying the metallic coating type. Yes M an..7 Metallic coating quantity The value of the metallic coating quantity. M n..18 Single spot thickness value The value of the single spot thickness of the

metallic coating. C n..18

Triple spot thickness value The value of the triple spot thickness of the metallic coating.

C n..18

Chemical element




31

Organic coating


Organic coating trademark name The name of the organic coating trademark. C an..256 Resin type The code specifying the resin type. Yes C an..3 Resin trademark name The name of the resin trademark. C an..256 Resin description The text providing the description of the resin. C an..256 Tint standard The name of the tint standard.. C an..256 Tint code The code specifying the tint within the tint standard. C an..70 Nominal thickness value The value of the nominal thickness of the organic

coating. M n..18

Single spot thickness value The value of the single spot thickness of the organic coating.

C n..18

Triple spot thickness value The value of the triple spot thickness of the organic coating.

C n..18

Removable protective film type The code specifying the type of removable protective film.

Yes C an..3

Protective film free edge width The value of the width of the product edge free of protective film.

C n..18

Embossing code The code specifying the embossing design. Yes C an..3 Gloss


Gloss value The value of the gloss. M n..18 Foil


Foil type The code specifying the foil type. M an..3 Foil thickness The value of the thickness of the foil. C n..18

Layer


Layer rank The rank number of the layer from the base material..

M n..18

Resin type The code specifying the resin type. Yes C an..3 Resin trademark name The name of the resin trademark. C an..256 Resin description The text providing the description of the resin. C an..256 Tint standard The name of the tint standard. C an..256 Tint code The code specifying the tint within the tint standard. C an..70

Organic coating test


Name of the test The name of the organic coating test. M an..256 Organic coating test standard (1..N)

The name of the organic coating test standard. M an..256


32

Test condition


Test condition identification The identification of the test condition. Yes M an..35 Test condition value The value of the test condition. M an..35



Method code The method used to provide the test characteristics. Yes C an..3 Test characteristic identification The identification of the test characteristic. Yes M an..35 Test characteristic value The value of the test characteristic. M an..35

Classes part of Other test

Other test


Name of the test The name of the test. M an..256 Sample number The identification number of the sample. C an..35 Sample position across width The code giving the sample position across product

width. Yes C an..7


Yes C n..7



Yes C n..7

Test condition



Yes C an..3

Temperature The temperature relevant for the test. C n..18 Steel condition The code specifying the steel condition of the

sample during the test. Yes C an..3

Additional test condition


Test condition identification The identification of the test condition. Yes M an..35 Test condition value The value of the test condition. M an..35



Method code The method used to provide the test characteristics. Yes C an..3 Test characteristic identification The identification of the test characteristic. Yes M an..35 Test characteristic value The value of the test characteristic. M an..35


33

2.3. Attribute code lists Certificate type code

Code Description 2.1 Certificate of compliance with the order ‘2.1’ 2.2 Test report ‘2.2’ 2.3 Specific test report ‘2.3’ Code deleted in norm EN10204-2004 3.1 Inspection certificate ‘3.1’ New code in norm EN10204-2004 3.1.A Inspection certificate ‘3.1.A’ Code deleted in norm EN10204-2004 3.1.B Inspection certificate ‘3.1.B’ Code deleted in norm EN10204-2004 3.1.C Inspection certificate ‘3.1.C’ Code deleted in norm EN10204-2004 3.2 Inspection report ‘3.2’ 9 Quality report Delivery terms coded Code list UN-EDIFACT data element 4053

Code Description 1 Delivery arranged by the supplier 2 Delivery arranged by logistic service provider CFR Cost & Freight CIF Cost, Insurance, Freight to named destination CIP Freight, Carriage, Insurance to destination CPT Freight, Carriage paid to destination DAF Delivery at frontier – Named place DDP Delivery duty paid to destination DDU Delivery duty unpaid to destination DEQ Delivery Ex Quay – Duty paid, Named port DES Delivery Ex ship – Named port of destination EXW Ex works FAS Free alongside ship FCA Free carrier – Named point FOB Free on Board – Named port of shipment FOR Free on Rail – Named departure point Transport means description code Code list UN-EDIFACT data element 8179

Code Description 11 Ship (A large vessel navigating deep water) 13 Ocean vessel (An ocean-going vessel that is not an ship) 16 Barge (A category of boat used to transport material over water) 23 Rail bulk car (A rail wagon equipped to transport bulk cargo) 31 Truck (An automotive vehicle for hauling goods) 47 Bulk truck (A truck suitable for transporting bulk goods) 59 Steel product vessel (Vessel for carrying steel products) 62 Coal vessel (Vessel for carrying coal) 63 Ore vessel (Vessel for carrying ore) 73 Train with more than one and less than 20 wagons 74 Train with 20 or more wagons


34

Responsible agency Code list UN-EDIFACT data element 3055

Code Description 5 ISO (International Organisation for Standardisation) 10 ODETTE 16 US, D&B (Dun & Bradstreet Corporation) 17 S.W.I.F.T. 58 EUROFER 90 Assigned by manufacturer 91 Assigned by seller or seller’s agent 92 Assigned by buyer or buyer’s agent Contact function code Code list UN-EDIFACT data element 3139

Code Description AD Accounting contact BD New development contact CR Customer relations DL Delivery contact GR Goods receiving contact OC Order contact IC Information contact MC Material control contact SU Supplier contact Reference code qualifier for Item reference

Code list UN-EDIFACT data element 7143

Code Description BL Control number DR Drawing revision number EC Engineering change number MF Manufacturers’ article number Steel grade standard country code See UN/ECE Recommendation No. 3. EUROFER recommends to use the apha-2 representation of the country code provided in the ISO 3166 standard.


35

Dimension type Code list UN-EDIFACT data element 6313

Code Description DI Diameter DP Depth HT Height dimension LN Length dimension OD Outside diameter TH Thickness WD Width dimension Dimension unit specifier Code list UN/EDIFACT data element 6411

(UN/ECE Recommendation 20)

Code Description CMT Centimetre FOT Foot INH Inch KTM Kilometre MTR Metre MMT Millimetre SMI Mile 4H Micrometre (micron) Quantity type Code list UN/EDIFACT data element 6313

Code Description AAA Unit net weight AAB Unit gross weight Quantity unit specifier Code list UN/EDIFACT data element 6411


Code Description C62 One (code used for piece) KGM Kilogram LBR Pound TNE Tonne (metric ton)


36

Measure unit specifier Code list UN/EDIFACT data element 6411


Code Description P1 Percent Temperature unit specifier Code list UN/EDIFACT data element 6411


Code Description CEL Degree Celsius FAH Degree Fahrenheit Dimension unit specifier Code list UN/EDIFACT data element 6411


Code Description INH Inch MTR Metre MMT Millimetre 4H Micrometre (micron) Product group, coded Product category, coded Product sub-category, coded Product form, coded Product shape, coded Temper Steel type Oiling status Oil type Oiling quantity code Weld type Weld identification Weld bead trimming code Weld bead annealing code Metallic spangle coded Metallic coating type Metallic coating unit Chemical element coded Chemical formula coded Carbon equivalent coded (CEQ) Type of test Steel condition Sample position across width Sample position along length Sample position through thickness Mechanical property Side position Chemical surface treatment type Roughness process Protective film Resin type See the code list present in the manual of Product information.


37

All information provided in this documentation is provided "as is" without any warranties of any kind including warranties of accuracy, fitness for a particular purpose, or non-infringement or intellectual property. EUROFER shall not be held responsible for any errors or any loss resulting from any use of this document or the specification herein. The materials contained in this document may be copied provided that ALL copies retain the copyright and any other proprietary notices contained on the materials. No material may be modified, edited or taken out of context such that its use creates a false or misleading statement or impression as to the positions, statements or actions of the publisher. 2003 EUROFER. All rights reserved. All countries

esidel-2003-010 certificate v1.0 version2006 -...

Documents