esab pt600 plasma parts
DESCRIPTION
esab pt600 plasma partsTRANSCRIPT
0
450
900
1350
1800
XP3 OEM XP3 OEM XP3 OEM
12 mm mild steel at 200 amps
19 mm mild steel at 360 amps
Nu
mb
er o
f 20
-sec
on
d c
uts
XP3 cuts 33% faster
XP3 cuts 25% faster
XP3 cuts 20% faster
12 mm mild steel at 260 amps
XP3 consumables maximize productivityand lower operating cost withoutsacrificing cut quality.
Increased consumable life• XP3 consumables last, on average, twice as long as the OEM.• Cut consumables usage in half.• Reduce system down time associated with consumable changes.
Increased cut speed• XP3 consumables cut, on average, 25% faster than the OEM –
at equivalent power levels.• Increase productivity of your plasma cutting process.• Process more parts per hour and more sheets per shift.
Increased consistency• Provides superior cut quality over the life of the consumables.• XP3 consumables maintain high cut quality over the life of the
consumables.• Highly engineered designs and precision manufacturing assure
consistent consumable quality and life.
XP3™ consumables for ESAB®PT-600
and PT-19XLS plasma torches
Cutting Costs
Centricut XP3 vs. OEM Cut quality over life of consumablesCut quality measured according to ISO 9013 ranges 3 and 4.
Why choose between cut quality, cut speed
and consumable life? With Centricut XP3
consumables, you get them all!
H2H_XP3_88073D.qxp:H2H_XP3_88073D 3/31/09 7:48 AM Page 1
Multiple ports foroptimum flow
Large opening exposing nozzleWrap around nozzle protection
Hypertherm technology cuts costs and increases performance
Through the use of Hypertherm’s SilverLine™, CoolFlow™ and MultiPort™ technologies, XP3 consumablesdeliver value to your cutting process beyond the capabilities of OEM and aftermarket consumables.
www.hypertherm.com
Head to Head
SilverLine electrode technology
• A solid silver front-end allows the SilverLine electrodeto achieve a 45% deeper pit depth doubling theelectrode life on average.
• Robust welded copper/silver interface deliversconsistent performance.
CoolFlow nozzle technology
• Robust construction and exceptional coolingthroughout the entire nozzle assembly leads to adoubling of nozzle life on average.
• Self-aligning two-piece nozzle design creates a stableplasma arc yielding the highest quality cutting.
• Brass nozzle base design and cooling maximize tip tobase ratio resulting in lower consumable cost.
MultiPort shield technology
• Designed to minimize damage caused by spattering ofmolten metals – maximizing consumable life.
• Optimized shield orifice and heavy duty constructionprotect the nozzle from spatter and plate crashdamage.
• Optimized shield gas flow improves consumable lifeand enhances cut quality.
Cooling channel
Solid silver front-endMaximum 2,3 mm pit depth
Cooling channel
Silver cup
Maximum 3,3 mm pit depth
Cooling isolated toback of the nozzle
Thinner nozzle wallTwo-piece technology
Partially-used SilverLineelectrode after 1,500 starts
Centricut XP3 OEM
Centricut, Hypertherm, XP3, SilverLine, CoolFlow and MultiPort are trademarksof Hypertherm, Inc., and may be registered in the United States and/or othercountries. All other trademarks are the property of their respective owners.Hypertherm is in no way affiliated with ESAB.
© 3/09 Hypertherm, Inc. 88073D
Fully-used OEM electrodeafter 1,100 starts
Actual results Actual results
Partially-used CoolFlownozzle after 1,500 starts
Fully-used OEM nozzle after1,100 starts
XP3 consumables still going strong long after the OEM consumables have failed
Maximizedcooling
throughout
H2H_XP3_88073D.qxp:H2H_XP3_88073D 3/31/09 7:48 AM Page 2
Product Bulletin: C96-925 Modular Torch Body for PT-600
Centricut has introduced a new Modular Torch Body (part # C96-925) for Esab plasma systems using the PT-600 style torch. This new torch provides users with the option of easily replacing the Insulator Assembly (C47-083) and Insulating Tube Kit (C47-900) resulting in reduced downtime and more cost effective field repairs. Also included is the Rear Main Body Assembly (C47-066), which features a unique threaded and glued sleeve-to-shell design that improves long term alignment of torch components and overall service life of the torch. Upgrade to the Modular PT-600 Torch Body and see the benefits of low cost field repairs and improved torch performance.
NEW!
C47-066 Rear Main Body Assy.
C47-083 Insulator
Assy.
Threaded and glued sleeve-to-shell design
C47-900 Insulating Tube Kit
C96-925 Modular
Torch Body
Centricut is in no way affiliated with ESAB®; PT-600 is a product of ESAB®
1-800-752-7623 ■ 1-603-298-7849 ■ FAX 1-603-298-5938 ■ www.centricut.com Centricut, Two Technology Drive, West Lebanon, NH USA 03784
3.
2.
1.
4.
5.
6.
7.
8.
9.
10.
Achieve maximum consumable lifeA fully used SilverLine electrode will have a pitdepth of .130" (3.3 mm). This is deeper than therec ommended pit depth for standard parts of .090"(2.3 mm).
With proper use, the CoolFlow nozzle will last 1:1with the SilverLine electrode.
Purge torch: After each parts change purge the torchfor at least 30 seconds to remove residual moisture.Leak check: After purging the torch make sure allo-ring seals are working as designed.Adjust gas flow: Plasma gas flow rate is critical.High flow will cause rapid electrode wear and hardstarting. Low flow will cause uncontrolled arcing.(See parameters on back.)Adjust arc voltage: As the consumables wear, thetorch will get closer to the plate. To maintain optimumcutting height, increase arc voltage in 2-volt increments,up to 20 volts higher than the initial setting.
Avoid running off work: This occurs when the arc stretches during rip cutting off the plate or when the arcchases a part as it falls. This shortens consumable life. Properly tighten the nozzle retaining cap: Makesure the nozzle retainer is sealed tightly against thenozzle to prevent leaking.Pierce at correct height: Refer to the cut chart onthe back for optimum pierce height. Piercing too lowcauses molten metal (spatter) to hit the shield andnozzle – the most common cause of prematurenozzle failure. Piercing too high can cause misfires. Adjust shield gas flow: Refer to the cut chart onthe back for optimum shield gas flow. Having thecorrect start shield flow provides protection to thenozzle and shield during the pilot process. Clean the nozzle and shield: Periodically cleanthe nozzle and shield to remove spatter. This willprevent double arcing.
Centricut XP3 consumables for ESAB®
PT-600 and PT-19XLSQuick Set-up
Part number Reference Description
C96-925 0558001825 Torch body modular1. C47-066 37066 Torch body2. C47-083 37083 Insulator body
C47-071 37071 Contact ring assembly3. C96-621 0558001621 Electrode holder
C47-142 0558002533/948142 Gas swirl baffle, 4 hole, stdC10-660 0558001625, 35660 Gas swirl baffle, 8 hole, std
4. C120-1010 N/A SilverLine electrode* 5. C120-030 N/A CoolFlow nozzle base assembly**
C120-010 N/A CoolFlow nozzle base**C120-020 N/A Baffle, coolant**
6. C120-200 N/A CoolFlow nozzle tip, 200 amp**C120-260 N/A CoolFlow nozzle tip, 260 amp**C120-360 N/A CoolFlow nozzle tip, 360 amp**
7. C47-082 37082 Nozzle retaining cap8. C47-944 21944 Diffuser, 100 – 600 amp 9. C120-920 N/A MultiPort shield, 200 amp*
C120-900 N/A MultiPort shield, 260 amp*C120-936 N/A MultiPort shield, 360 amp*
10. C47-081 37081 Shield retainerC120-013 N/A Wrench, nozzle baseC120-012 N/A Wrench, electrode/nozzle
* patented** patent pending
Why choose between speed, cut quality andconsumable life?Upgrade to XP3™ consumables to increase speed and consumablelife without sacrificing cut quality. Benefit from 3 advancedtechnologies – SilverLine™, CoolFlow™ and MultiPort™ – designed todeliver extra value to your cutting process beyond that of the OEM.
QSC_880740_XP3.qxp:QSC_880740_XP3 3/27/09 7:52 AM Page 1
www.hypertherm.com
Centricut, XP3, Hypertherm, SilverLine, CoolFlow andMultiPort are trademarks of Hypertherm, Inc., and may beregistered in the United States and/or other countries. Allother trademarks are the property of their respectiveowners. Hypertherm is in no way affiliated with ESAB.
© 3/09 Hypertherm, Inc. 880740
Recommended parameters for mild steel cutting with oxygen
Contact your Hyperthermdistributor or call 1-800-752-7623 for thelocation nearest to you.
Thickness Amps Start gasN2
Cut gas O2
Shield gas Arcvoltage
Cut height
Initial height
Above water cutting speed
Under watercutting speed
Piercedelay
Kerf widthStart/Cut Start/Cut
in. A psi Auto psi Flow cfh psi Flow cfh V in. in. in/min in/min sec in.1/4 EPP
orESP
200
25 45 140 85 200 132 .125 .375 250 225 0.0 .0603/8 25 45 140 85 200 138 .125 .375 155 140 0.2 .0851/2 25 45 140 85 200 140 .125 .375 121 110 0.2 .0905/8 25 45 140 85 200 147 .135 .500 100 90 0.3 .0953/4 25 45 140 85 200 151 .140 .500 76 70 0.4 .0951 25 45 140 85 200 154 .140 .500 50 45 0.5 .100
1/4
260
25 40 120 18 250 130 .135 .375 245 221 0.0 .0953/8 25 40 120 18 250 134 .135 .375 180 162 0.0 .1051/2 25 40 120 18 250 135 .140 .500 145 131 0.2 .1155/8 25 40 120 18 250 138 .150 .500 115 104 0.2 .1253/4 25 40 120 18 250 142 .220 .500 90 81 0.2 .1351 25 40 120 18 250 150 .416 .625 65 59 0.4 .150
1-1/4 25 40 120 18 250 162 .416 .625 45 41 0.8 .1551-1/2 25 40 120 18 250 168 .416 .625 35 32 1.2 .1601/2
360
25 48 140 22 250 132 .135 .500 162 146 0.2 .1355/8 25 48 140 22 250 134 .135 .500 140 126 0.3 .1403/4 25 48 140 22 250 135 .135 .500 120 108 0.3 .1451 25 48 140 22 250 147 .250 .625 80 72 0.5 .153
1-1/4 25 48 140 22 250 150 .250 .625 55 50 0.6 .2001-1/2 25 48 140 22 250 153 .250 .625 38 35 0.7 .220
Thickness Amps Start gasN2
Cut gas O2
Shield gas Arcvoltage
Cut height
Initial height
Above water cutting speed
Under watercutting speed
Piercedelay
Kerf widthStart/Cut Start/Cut
mm A bar Auto bar Flow cfh bar Flow cfh V mm mm mm/min mm/min sec mm6 EPP
orESP
200
1.7 3.1 140 5.9 200 132 3.2 9.5 6350 5715 0.0 1.510 1.7 3.1 140 5.9 200 138 3.2 9.5 3937 3556 0.2 2.212 1.7 3.1 140 5.9 200 140 3.2 9.5 3073 2794 0.2 2.315 1.7 3.1 140 5.9 200 147 3.4 12.7 2540 2286 0.3 2.418 1.7 3.1 140 5.9 200 151 3.6 12.7 1930 1778 0.4 2.425 1.7 3.1 140 5.9 200 154 3.6 12.7 1270 1143 0.5 2.56
260
1.7 2.8 120 1.2 250 130 3.4 9.5 6223 5613 0.0 2.410 1.7 2.8 120 1.2 250 134 3.4 9.5 4572 4115 0.0 2.712 1.7 2.8 120 1.2 250 135 3.6 12.7 3683 3327 0.2 2.915 1.7 2.8 120 1.2 250 138 3.8 12.7 2921 2642 0.2 3.218 1.7 2.8 120 1.2 250 142 5.6 12.7 2286 2057 0.2 3.425 1.7 2.8 120 1.2 250 150 10.6 15.9 1651 1499 0.4 3.830 1.7 2.8 120 1.2 250 162 10.6 15.9 1143 1041 0.8 3.940 1.7 2.8 120 1.2 250 168 10.6 15.9 889 813 1.2 4.112
360
1.7 3.3 140 1.5 250 132 3.4 12.7 4115 3708 0.2 3.415 1.7 3.3 140 1.5 250 134 3.4 12.7 3556 3200 0.3 3.618 1.7 3.3 140 1.5 250 135 3.4 12.7 3048 2743 0.3 3.725 1.7 3.3 140 1.5 250 147 6.4 15.9 2032 1829 0.5 3.930 1.7 3.3 140 1.5 250 150 6.4 15.9 1397 1270 0.6 5.140 1.7 3.3 140 1.5 250 153 6.4 15.9 965 889 0.7 5.6
Assembly instructionsStep 1 Step 2 Step 3 Step 4 Step 5
Smoothside down
QSC_880740_XP3.qxp:QSC_880740_XP3 3/27/09 7:52 AM Page 2
Upgrade to SilverLine® technology!Patented SilverLine technology improves electrode and nozzlelife so you can cut more metal with one set of consumables. Tostart saving with SilverLine just follow the instructions on ourQuick Set-up card: the more you cut the more you save!
Centricut product for ESAB®
PT-600Quick Set-up
3.
2.
1.
6.
5.4.
8.7.
17.16.
19.18.
14.13.
9.12. 11.
10.
20.
15.
SilverLine electrodes on average last twice as long as standard electrodes.
The hafnium-silver bond is more effective thanhafnium-copper in standard electrodes. Thisallows the SilverLine electrode to achieve a33% deeper pit depth.
The robust copper-silver interface, combinedwith the hafnium-silver bond deliver consistentperformance and lower the overallcost of cutting.
Part number Reference Description
1. C47-066 37066 Torch bodyC96-925 0558001825 Torch body, modular (includes item #2)C96-993 N/A SilverLine, torch assembly, 250 ampC96-994 N/A SilverLine, torch assembly, 360 amp
2. C47-083 37083 Insulator bodyC47-073 37073 Screw, contact ring
3. C47-071 37071 Contact ring assembly4. C47-142 948142, 0558002533 Gas swirl baffle, ceramic, 4 x .032"
L47-143 948143, 0558002534 Gas swirl baffle, ceramic, 4 x .032", rev5. C10-660 35660, 0558001625 Gas swirl baffle, ceramic, 8 x .047"
L47-194 22194 Gas swirl baffle, ceramic, 32 x .023"6. C96-621 0558001621 Electrode holder7. C96-1024 0558001624 SilverLine electrode, 250 amp8. C96-1016 0558002516 SilverLine electrode, 360/400 amp9. C47-822 21822, 0558001623 Nozzle, .099, 250 amp
C47-885 35885, 0558001885 Nozzle, .120, 360 ampC47-195 22195, 0558001886 Nozzle, .130, 400 ampL47-401 22401, 0558001887 Nozzle, 600 amp
10. C47-028 22028 Nozzle base11. C47-928 N/A Nozzle base, extended life, 100 – 400 amp12. C47-027 22027 Nozzle base, 50 amp13. C47-026 22026 Nozzle tip, .041, 50 amp14 C47-029 22029 Nozzle tip, .071, 100 amp
C47-030 22030 Nozzle tip, .082, 150 ampC47-031 22031 Nozzle tip, .091, 200 ampC47-922 22032 Nozzle tip, .099, 250 ampC47-985 22034 Nozzle tip, .120, 360 ampC47-995 22033 Nozzle tip, .130, 400 amp
15. C47-082 37082 Nozzle retaining cap16. L47-796 21796 Diffuser, 50 amp17. C47-944 21944 Diffuser, 100 – 600 amp
C47-496 22496 Diffuser, 100 – 600 amp, rev18. L47-795 21795 Shield, 50 amp19. C47-802 21802 Shield, 100 – 250 amp
C47-945 21945 Shield, 325 – 600 amp20. C47-081 37081 Shield retainer
C10-483 19483, 0558001626 Double threaded mounting tubeC47-900 N/A Insulating tube kit, PT-19XLS/PT-600
QSC_PT600_880670.qxp:QSC_PT600_880670 6/5/09 3:13 PM Page 1
Centricut, Hypertherm and SilverLine are trademarks of Hypertherm, Inc., and may be registered in the United States and/orother countries. All other trademarks are the property of their respective owners. Hypertherm is in no way affiliated with ESAB.
© 5/09 Hypertherm, Inc. Revision 1880670
Thickness Amps Plasmastart gas
Plasma cut gas
Shield start gas
Shield cut gas
Arc voltage
Cut height
Initial height
Speed Pierce delay
in. mm A psi bar psi bar psi bar psi bar V in. mm in. mm in/min mm/min sec
1/8 3100
25 1.7 47 3.2 20 1.4 10 0.7 123 .156 4 .375 10 190 4826 01/4 6 25 1.7 44 3.0 20 1.4 18 1.2 133 .156 4 .375 10 120 3048 03/8 10 25 1.7 47 3.2 20 1.4 16 1.1 149 .187 5 .375 10 80 2032 0.21/2 13
15020 1.4 38 2.6 20 1.4 16 1.1 140 .250 6 .500 13 75 1905 0.4
5/8 16 20 1.4 44 3.0 21 1.5 18 1.2 151 .312 8 .500 13 55 1397 0.53/4 19 20 1.4 38 2.6 18 1.2 10 0.7 157 .394 10 .500 13 45 1143 0.81/2 13
200
25 1.7 44 3.0 20 1.4 10 0.7 129 .250 6 .500 13 90 2286 0.25/8 16 20 1.4 41 2.8 20 1.4 11 0.8 139 .250 6 .500 13 65 1651 0.33/4 19 25 1.7 41 2.8 18 1.2 11 0.8 142 .312 8 .500 13 55 1397 0.31 25 25 1.7 41 2.8 18 1.2 12 0.9 153 .312 8 .500 13 40 1016 0.5
1/2 13
250
25 1.7 44 3.0 20 1.4 16 1.1 135 .312 8 .500 13 115 2921 0.25/8 16 25 1.7 41 2.8 14 1.0 12 0.9 138 .312 8 .500 13 80 2032 0.13/4 19 25 1.7 38 2.6 18 1.2 12 0.9 142 .312 8 .500 13 65 1651 0.21 25 25 1.7 38 2.6 18 1.2 12 0.9 150 .416 11 .625 16 50 1270 0.4
1-1/4 32 26 1.8 44 3.0 22 1.5 22 1.5 162 .416 11 .625 16 33 838 0.83/4 19
36025 1.7 35 2.4 22 1.5 22 1.5 132 .312 8 .500 13 100 2540 0.3
1 25 25 1.7 35 2.4 22 1.5 22 1.5 141 .416 11 .625 16 65 1651 0.71-1/4 32 25 1.7 38 2.6 22 1.5 22 1.5 146 .416 11 .625 16 45 1143 0.9
1 25400
25 1.7 37 2.5 22 1.5 22 1.5 141 .416 11 .625 16 80 2032 0.31-1/4 32 25 1.7 37 2.5 22 1.5 22 1.5 142 .416 11 .625 16 60 1524 0.71-1/2 38 25 1.7 37 2.5 22 1.5 22 1.5 150 .416 11 .625 16 43 1092 1.2
Recommended parameters for mild steel cutting with oxygen
Fully-used electrodeThis SilverLine electrode has provided full use.The pit depth is .120" (3.0 mm). The operatorincreased the arc voltage in 5-volt increments,up to 20 volts from the first cuts made with thiselectrode to the last. This maintains a constantdistance between the torch and the work-piecethrough the life of the electrode.
Partially-used electrodeThis SilverLine electrode is only partially consumed.The pit in the center of the part measures .090"(2.3 mm). Electrodes are often removed prematurelydue to cut quality deterioration related to nozzlefailure. Additional life can be achieved by replacingthe nozzle and leaving the electrode in place.
Achieve maximum consumable life
Use electrode to full life: A fully used SilverLineelectrode will have a pit depth of .120" (3.0 mm).This is deeper than the recommended pit depth forstandard parts of .090" (2.3 mm).
Properly tighten the nozzle retaining cap: Makesure the nozzle retainer is sealed tightly against thenozzle to prevent leaking.
Purge torch: After each parts change, purge thetorch for at least 30 seconds to remove residualmoisture.
Leak check: After purging the torch, make sureall o-ring seals are tight and there are no torchcoolant leaks.
Adjust plasma gas pressure: Plasma gas flowrate is critical. High flow will cause rapid electrodewear and hard starting. Low flow will causeuncontrolled arcing.
Adjust shield gas pressure: Refer to the cut chartfor optimum shield gas pressure. Having the correctstart shield flow provides protection to the nozzleand shield during the pilot process.
Contact your Hyperthermdistributor or call1-800-752-7623 for thelocation nearest to you.
.090" (2.3 mm) .120" (3.0 mm)
Pierce at correct height: Refer to the cut chart foroptimum pierce (initial) height. Piercing too lowcauses molten metal (spatter) to hit the shield andnozzle – the most common cause of premature nozzlefailure. Piercing too high can cause misfires.
Adjust arc voltage: As the consumables wear, thetorch will get closer to the plate. To maintain optimumcutting height, increase arc voltage in 5-volt increments,up to 20 volts higher than the initial setting.
Avoid arc stretching: This can occur during ripcutting off the plate or when the lead out is improperlyprogrammed. This shortens consumable life.
Clean the nozzle and shield: Periodically clean thenozzle and shield to remove spatter. This will preventdouble arcing which shortens consumable life.
Hypertherm, Inc. Hanover, NH 03755 USA603-643-3441 Tel
Hypertherm (S) Pte Ltd.Singapore 34956765 6 841 2489 Tel
Hypertherm (Shanghai)Trading Co., Ltd. PR China 20005286-21 5258 3330 /1 Tel
Hypertherm Europe B.V.4704 SE Roosendaal, Nederland31 165 596907 Tel
HYPERTHERM BRASIL LTDA.Guarulhos, SP - Brasil 55 11 2409 2636 Tel
www.hypertherm.com
QSC_PT600_880670.qxp:QSC_PT600_880670 6/5/09 3:13 PM Page 2
15 Plasma www.centricut.com
PT-600®
OEM ESAB® System ESP®-200/300/400-600C/1000, PCM®-150/1500/8XL®
Consumables
Centricut Referencepart number number Description Pkg qty
1 C47-081 37081 Shield Retainer 12 L47-795 21795 Shield, 50 Amp 13 C47-802 21802 Shield, 100 – 250 Amp 1
C47-945 21945 Shield, 325 – 600 Amp 1L96-4678 0558004678 Shield 1
4 L47-796 21796 Diffuser, 50 Amp 15 C47-944 21944 Diffuser, 100 – 600 Amp 1
C47-496 22496 Diffuser, 100 – 600 Amp, Rev, Black 16 C47-082 37082 Nozzle Retaining Cap 1
L47-431 37431 Nozzle Retaining Cap, Air Curtain 17 C47-027 22027 Nozzle Base, 50 Amp 18 C47-028 22028 Nozzle Base, 100 – 360 Amp 19 C47-928 N/A Nozzle Base, Extended life, 100 – 400 Amp 110 C47-026 22026 Nozzle Tip, .041, 50 Amp 111 C47-029 22029 Nozzle Tip, .071, 100 Amp 1
C47-030 22030 Nozzle Tip, .082, 150 Amp 1C47-031 22031 Nozzle Tip, .091, 200 Amp 1C47-922 22032 Nozzle Tip, 250 Amp 1C47-985 22034 Nozzle Tip, 360 Amp 1C47-995 22033 Nozzle Tip, 400 Amp 1
12 C47-822 0558001623 Nozzle, .099, 250 Amp 1C47-885 0558001885 Nozzle, .120, 360 Amp 1C47-195 0558001886 Nozzle, .130, 400 Amp 1L47-401 0558001887 Nozzle, 600 Amp 1
13 C96-1024* 0558001624 SilverLine Electrode, 250 Amp 114 C96-1016* 0558002516 SilverLine Electrode, 360/400 Amp 115 C96-621 0558001621 Electrode Holder 116 C47-142 0558002533 Gas Swirl Baffle, 4 Hole, Std 1
L47-143 0558002534 Gas Swirl Baffle, 4 Hole, Rev 1L47-661 35661 Gas Swirl Baffle, 8 Hole, Rev 1
17 C10-660 0558001625 Gas Swirl Baffle, 8 Hole, Std 1L47-194 22194 Gas Swirl Baffle, Std 1
Maintenance items
Centricut Referencepart number number Description Pkg qty
19 C47-071 37071 Contact Ring Ass'y 118 C47-073 37073 Screw, Contact Ring Ass'y 1
C47-528 N/A O-Ring, Outside Insulator Body & Torch 5C10-483 19483 Double Threaded Mounting Tube 1
20 C47-083 37083 Insulator Body 122 C47-900 N/A Insulating Tube Kit, PT-19XLS/PT-600 1
C96-925 0558001825 Torch Body, Modular 121 C47-066 37066 Torch Body 1
L96-825 0558001825 Torch Body 1C96-993* N/A Torch Ass'y, SilverLine, 250 Amp 1C96-994* N/A Torch Ass'y, SilverLine, 360 Amp 1L96-4611 0558004611 Electrode, Holder, Tool 1027055 N/A Lubricant .25 oz. (7ml) Tube 1
* Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut and SliverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All othertrademarks are the properties of their respective owners. Centricut is in no way affiliated with ESAB.
18
15
1413
12
1110
987
6
54
32
1
16 17
22 21
20
19
NewTechnologyimprovementsavailable!See page 16!
* *
16 Plasma www.centricut.com
XP3 for PT-600® and PT-19XLS®
Consumables
Centricut Referencepart number number Description Pkg qty
1 C47-081 37081 Shield Retainer 12 C120-920* N/A MultiPort Shield, 200 1
C120-900 N/A MultiPort Shield, 260A 1C120-936 N/A MultiPort Shield, 360A 1
3 C47-944 21944 Diffuser, 100 – 600 Amp 14 C47-082 37082 Nozzle Retaining Cap 15 C120-200 N/A CoolFlowTM Nozzle Tip, 200 Amp 1
C120-260 N/A CoolFlow Nozzle Tip, 260 Amp 1C120-360 N/A CoolFlow Nozzle Tip, 360 Amp 1C120-2200† N/A CoolFlow Nozzle Kit, 200 Amp, 20 Pack 1C120-2260† N/A CoolFlow Nozzle Kit, 260 Amp, 20 Pack 1C120-2360† N/A CoolFlow Nozzle Kit, 360 Amp, 20 Pack 1
6 C120-010* N/A CoolFlow Nozzle Base 17 C120-020* N/A Baffle, Coolant 18 C120-030* N/A CoolFlow Nozzle Base Ass’y 19 C120-1010* N/A Silverline® Electrode 110 C96-621 558001621 Electrode Holder 111 C10-660 0558001625, 35660 Gas Swirl Baffle, 8 Hole, Std 1
C47-142 0558002533, 9481, 42 Gas Swirl Baffle, 4 Hole 1
Maintenance items
Centricut Referencepart number number Description Pkg qty
12 C47-043 37073 Screw, Contact Ring Ass’y 113 C47-071 37071 Contact Ring Ass’y 114 C47-083 37083 Insulator Body 115 C47-066 37066 Torch Body 1
C96-925 558001825 Torch Body Modular 1C120-012 N/A Wrench, Elec/Nozzle 1C120-013 N/A Wrench, Nozzle Base 1
† CoolFlow Nozzle Kits include 20 Nozzle Tips and 1 Nozzle Base Ass’y.
OEM ESAB® System ESP®-200/300/400-600C/1000, PCM®-150/1500/8XL
14
15
13
11
10
9*
7*
6*
5
4
3
2*
1
8*
12
Centricut and SliverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All othertrademarks are the properties of their respective owners. Centricut is in no way affiliated with ESAB.
New technologyimprovements!
Product Bulletin: SilverLine® Torch Assemblies for PT-600
Centricut’s PT-600 SilverLine® Torch Assemblies are available in 250 Amp and 360 Amp styles. They are factory assembled and leak tested to provide quick and reliable torch change-outs.
These torches include Extended Life Nozzle Bases and SilverLine® Electrodes to provide optimum performance. They also include a new modular torch assembly that provides the option of replacing the Insulator and Insulating Tube Kit for reduced downtime and more cost effective field repairs.
In addition these modular torches feature a unique threaded and glued sleeve-to-shell locking design that improves long term alignment of torch components.
Benefits of PT-600 SilverLine Torch Assembly:
Minimize system downtime with faster, more reliable torch swap-outs based on our preassembled and leak tested design
Improved long term alignment of torch components with unique threaded and glued sleeve-to-shell locking design
Longer parts life with performance enhancing SilverLine Electrode and Extended Life Nozzle Base
Expanded serviceability options from modular torch design
Simplified ordering and inventory with only 1 catalog number
2
Item
Description
250 Amp Part #
360 Amp Part #
1 SilverLine® Torch Assembly C96-993 C96-994 consists of:
2 Modular Torch Body C96-925 C96-925
includes:
L47-075 Pilot Arc Wire and Collet Assembly
C47-066 Torch Body
C47-083 Insulator Assembly 3 Contact Ring with Screw C47-071 C47-071 4 Gas Baffle C10-660 C10-660 5 Electrode Holder C96-621 C96-621 6 SilverLine® Electrode C96-1024 C96-1016 7 Extended Life Nozzle Base C47-928 C47-928 8 Nozzle Tip C47-922 C47-985 9 Diffuser C47-944 C47-944 10 Nozzle Retaining Cap C47-082 C47-082 11 Shield C47-802 C47-945 12 Shield Retainer C47-081 C47-081
3
Centricut is in no way affiliated with ESAB®; PT-600 is a product of ESAB®
1
4
5
6
7
8
9
10
11
12
1-800-752-7623 ■ 1-603-298-7849 ■ FAX 1-603-298-5938 ■ WWW.CENTRICUT.COMCentricut, Two Technology Drive, West Lebanon, NH USA 03784 C96-PB001 rev10/06