equipments - dynamic shielding€¦ · our jammers are ideally deployed to protect vip’s,...
TRANSCRIPT
�����������������
����������������&���������������
����������������������
���
�������
����������
We provide a wide range of jammers for various application. Our jammers are ideally deployed to protect VIP’s, Military/Security staff or EOD teams from RCIEDs. Each compact system consists of Jammer modules, antennas, battery, power supply to meet the needs of the Customer.
RF JAMMERS
EOD Jammer
■ Block wireless communication including Cellular, WiFi, Bluetooth, Wibro, etc
■ Output power up to 50W per band
■ Individual ON/OFF switch for each band
■ High gain omni-directional antennas
■ Specific signal source per band for maximum jamming efficiency
■ 2 hours of continuous operation using separate Lithium-polymer batteries(optional)
Portable Briefcase Jammer
■ Block wireless communication including Cellular, WiFi, Bluetooth, Wibro, etc
■ Output power up to 30W per band
■ Individual ON/OFF switch for each band
■ Internal antennas
■ Specific signal source per band for maximum jamming efficiency
■ Up to 50m of protection jamming radius range
■ 2 hours of continuous operation using separate Lithium-polymer batteries(optional)
Vehicle Jammer
■ Designed to block wireless communication including HF, VHF,
UHF, SHF, Cellular Networks, Satellite Phone, GPS
■ Output power up to 200W per band
■ Individual ON / OFF switch for each frequency band
■ Remote control
■ Automatic control by operating software
■ Specific signal source per band for maximum jamming efficiency
■ Customization is available based on customer requirement
(jamming system & vehicle selection)
We provide customized EMP cabinets to meet the specific needs and requirements of our customers.
*
We provide the ultimate in environmental and security protection against Electromagnetic Pulse (EMP) and High Power Microwave (HPM) exposure for critical communication equipment. It can be used to shield on-line or off-line equipment such as network devices, radios or communications gear or power distribution equipment to reconstitute operations following an EMP event or attack. All products meet MIL-STD-188-125 1 & 2 standard requirement.
EMP Protection Cabinet
HQ : #1308 Kranztechno, 388 Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13403, South KoreaFACTORY : #17170 Bogaewonsam-ro, Wonsam-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, 1752-2 South Korea / Tel. +82 31 777 8450 / Fax. +82 31 777 8933 / Email. [email protected]