equipment for engineering education & research …solution.com.my/pdf/fm22(a4).pdft his flow...
TRANSCRIPT
SOLTEQ®
FLOW VISUALISATION
APPARATUSMODEL: FM 22
THIS Flow Visualisation Apparatus (Model: FM 22) uses water as the following medium. The size
and shape of the unit match the basic hydraulic bench, however the unit can also be operated without
the bench. During the experiments than can be made on different drag bodies, ink is injected into a
flow chamber via fine nozzles. The chamber is covered with a glass panel, this allows optimal
EXPERIMENTAL CAPABILITIES
♦ Definition of flow and path lines in fluid mechanics
♦ Depiction of parallel flow lines when flowing around
bodies
♦ Influence of different shaped bodies on the flow
♦ Investigation of the influences of sources and sinks
on the flow lines
SPECIFICATIONS
♦ Unit for demonstrating flow lines, for use with the
Basic Hydraulics Bench
♦ Length : 700 mm x Width : 430 mm
Height : 180 mm, 22 kg
♦ Water as flowing medium, injection of ink in flow
chamber
♦ 8 different drag bodies
♦ Simulation of flow sources and flow sinks possible
Equipment for Engineering Education & Research
observation of the flow lines. Furthermore, using four additional holes, flow sources and flow sinks can besimulated,
in this way the analogy to potential field theory can be clearly demonstrated. The water flow rate and the amount of
ink injected can be adjusted using regulator valves.
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
SOFTWARE & e - LEARNING
SOLDAS® - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experimental Results
SOLCAL® - Computer Aided Learning
- Multimedia Features
- Interactive
- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals
SOLTEQ®
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023
Email : [email protected] site : http//www.solution.com.my/
AGENT:
Equipment for Engineering Education & Research
BUATAN MALAYSIA
MSC- StatusCompany