equip test probe_catalog_edition 2016 - 2017
TRANSCRIPT
™
2ⁿd Edition 2016 / 2017
Catalog for the Electronics Industry
ProbesTest
Equip-Test™ • [email protected] • www.equip-test.com ≡
This catalog is a general guide to the products. Buyers and users must decide themselves in regard to the suitability and safety of the products for their applications. No responsibility can be taken from the supplier´s side. We reserve right to carry out design and/or material specification changes without prior notice.
Equip-Test™ has its headquarters in the metropolitan area of Budapest Hungary in Central Europe, and is a global
player in regard to testing and measurement. Constant investments in our R&D department and internal laboratory
as well as in our extensive high-tech production and manufacturing facilities lead us to a well-known brand. Our
well-trained and loyal staff, offers full support to our customers and are the backbone of our success.
Quality Assurance
Equip-Test™ runs the business using state-of-the-art ERP and CRM solutions. Everything we do complies with the
latest quality assurance regulations of ISO9001 as well as with ISO 14001 – the so-called “GREEN” certificate. Our
company is certified annually by the DEKRA Germany.
Test Equipment
Our Test Equipment department offers complete one-stop solutions for most PCB-based electrical test-related
demands. We provide everything from all different types of spring-loaded Test Probes and Bare-board Probes
through to ICT and Special Test Fixtures and also ICT Test Systems with complete Test Application Programs. In our
test equipment products we also implement ISP (In-system Programmers), Mass-interconnect Solutions and also
other related products such as LED Check, Pneumatic side-contacting Units. Customized Cable Harnesses and
Cable Harness Test Systems are also available. Our strength lies in our ergonomically designed and functionally well
thought-through products with high value-added engineering and our extensive after-sales technical support
worldwide.
Test Probes
Test Probes provide the vital link to transfer measurement signals as true and as undistorted as possible. Therefore
these elements can be regarded as the heart of Test Fixtures - and for this very reason it is important for Equip-Test™ to offer high-performance Test Probes with best quality and value, and thus ensure maximized ROI (Return
of Investment) for our customers.
Test Probes supplied by Equip-Test™ always provide the best-possible available solution for your contacting demands.
Please send your inquiry to:
Our Technical Support Team will then get in touch with you soonest.
Your Equip-Test™ Support Team!
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
TOC
Table of Contents Table of Contents
Tabl
e of
Con
tent
s T
OC
Main Tip Styles and Applications 1
Overview - Insertion / Extraction Tools 4
Standard Test Probe Insertion / Extraction Tools 5
Special Test Probe Insertion / Extraction Tools 7
Threaded Test Probe Insertion / Extraction Tools 7
Socket / Receptacle Insertion / Extraction Tools 8
Lead-free Test ProbesLF1000 Lead-free Test Probes 9
LF1006 Lead-free Test Probes 11
LF750 Lead-free Test Probes 13
LF753 Lead-free Test Probes 15
LF500 Lead-free Test Probe 17
LF501 Lead-free Test Probes 19
LF400 Lead-free Test Probes 21
LF401 Lead-free Test Probes 23
ICT / FCT Test ProbesST1000 ICT Test Probes 25
RCP066 Sockets / Receptacles for ST1000 27
Bead Probes ST1000 28
ST1001 ICT Test Probes 30
ST1006 ICT / FCT Test Probes 33
ST750 ICT Test Probes 35
RCP052 Sockets / Receptacles for ST750 37
ST751 ICT Test Probes 39
ST753 ICT /FCT Test Probes 41
ST754 ICT / FCT Test Probes 43
ST500 ICT Test Probes 45
ST501 ICT / FCT Test Probes 47
RCP037 Sockets / Receptacles for ST500 49
ST400 ICT Test Probes 51
ST401 ICT / FCT Test Probes 53
RCP030 Sockets / Receptacles for ST400 55
Micro probesMP300 Micro Probes 57
Multi-purpose Test ProbesST510 Multi-purpose Test Probes 59
ST755 Multi-purpose Test Probes 61
ST1011 Multi-purpose Test Probes 63
ST1020 Multi-purpose Test Probes 65
ST1023 Multi-purpose Test Probes 67
ST1028 Multi-purpose Test Probes 69
ST1030 Multi-purpose Test Probes 71
RCP079 Sockets / Receptacles 73
ST1013 Multi-purpose Test Probes 75
ST1014 Multi-purpose Test Probes 77
ST1015 Multi-purpose Test Probes 79
ST1016 Multi-purpose Test Probes 81
ST1017 Multi-purpose Test Probes 83
ST1018 Multi-purpose Test Probes 85
ST1019 Multi-purpose Test Probes 87
ST1034 Multi-purpose Test Probes 89
ST1036 Multi-purpose Test Probes 91
ST1250 Multi-purpose Test Probes 93
ST1608 Multi - purpose Test Probes 95
ST1609 Multi-purpose Test Probes 97
RCP118 Sockets / Receptacles 99
ST1615 Multi-purpose Test Probes 101
ST1616 Multi-purpose Test Probes 103
ST1800 Multi-purpose Test Probes 105
ST1870 Multi-purpose Test Probes 107
Interface ProbesIT1000 Interface Probes 109
BIT1000 Banana Interface Probes 111
IT1001 Interface Probes 113
BIT1001 Banana Interface Probes 115
IT1002 Interface Probes 117
IT1003 Interface Probes 119
IT1004 Interface Probes - Mint Pin 121
IT1007 Interface Probes 123
IT1250 Interface Probes 125
Fixture CustomizingFC1000 Fixture Customizing Probes - Test Jet 127
FC1001 Fixture Customizing Probes - Polarity Check 129
FC1010 - ESD Grounding Probe 131
TestJet Parts for Keysight / Agilent 3070 fixtures 133
VTEP Parts for Keysight / Agilent 3070 fixtures 135
Open Xpress for Genrad 137
FrameScan Plus for Teradyne 138
FrameScan FX for Teradyne 140
IC Series Interface Contacts 141
Interface Contacts IC Series 142
IC & RF Series Interface Contacts 143
Marking Unit 144
PIC Pneumatic Interface Contacts 145
VPC Signal & Pneumatic Interface Modules 146
Signal Interface Blocks 147
High-current Signal & Pneumatic Interface Blocks 148
High-current ProbesHC1000 High-current Probes up to 16 A 149
HC1001 High-current Probes up to 16 A 151
HC1002 High-current Probe up to 16 A 152
HC1003 High-current Probes up to 16 A 153
HC1004 High-current Probes up to 16 A 154
HC1005 High-current Probes up to 16 A 155
HC1007 High-current Probes up to 16 A 156
HC1008 High-current Probes up to 16 A 157
HC1033 High-current Probes up to 16 A 158
HC1600 High-current Probes up to 24 A 159
HC1601 High-current Probes up to 24 A 161
HC1602 High-current Probes up to 24 A 162
HC1608 High-current Probes up to 24 A 163
HC2000 High-current Probes up to 50 A 165
HC2001 High-current Probes up to 50 A 167
Switch ProbesSW750 Switch Probes 169
SW1000 Switch Probes 171
SW1001 Switch Probes 173
SW1002 Switch Probes 175
SW1400 Switch Probes 177
SWO1400 Switch Probes Openers 179
NRSW1400 Non-Rotating Switch Probes 181
SWTB2560 Ball-Head Switch Probes 183
Pneumatic Test ProbesPN1000 Pneumatic Test Probes 185
PN1001 Pneumatic Test Probes 187
PN1002 Pneumatic Test Probes 189
PN1003 Pneumatic Test Probes 191
PN1401 Pneumatic Test Probes 193
PN1402 Pneumatic Test Probes 195
PA Pneumatic Accessories 197
Battery Probes
BP1000 Battery Probes 199
BP1002 Battery Probes 201
Sockets / Receptacles RCP066 202
BP1003 Battery Probes 203
BP1004 Battery Probes 204
BP1200 Battery Probes 205
BP1203 Battery Probes 207
BP1203 Battery Probes 208
BP1601 Battery Probes 209
BP1602 Battery Probes 211
BP1604 Battery Probes 213
BP2601 Battery Probes 215
Kelvin Test ProbesKP2560 Kelvin Test Probes 217
KPT2560 Kelvin Test Probes 219
Radio-frequency Test ProbesRF4004 & RFT4004 RF Test Probes 221
RF0506 & RFT0506 RF Test Probes 222
RF0606 & RFT0606 RF Test Probes 223
RF0706 & RFT0706 RF Test Probes 224
RF0806 & RFT0806 RF Test Probes 225
RF1206 & RFT1206 RF Test Probes 226
RF2506 & RFT2506 RF Test Probes 227
RF2806 & RFT2806 RF Test Probes 228
RF2806 & RFT2806 RF Test Probes 229
RF3006 & RFT3006 RF Test Probes 230
RF4706 & RFT4706 RF Test Probes 231
RF Receptacles / RF Test Probes Inner Plungers 232
RFI2051 Series RF Test Probes Inner Plungers 233
Cable Confection, Module Assembly 234
Custom Made RF Solutions / RF Cable Assemblies
RF9000 001 & 002 RF Test Probes 235
RF9000 003 & 004 RF Test Probes 236
Notes 237
Tabl
e of
Con
tent
s
1 2
Main Tip Styles and Applications Main Tip Styles and Applications
Technical Information Technical Information
CR
OW
N T
IP
HEX
AG
ON
AL
TIP
Mai
n Ti
p S
tyle
s an
d A
pplic
atio
ns
Mai
n Ti
p S
tyle
s an
d A
pplic
atio
ns
RA
ER
FA
CC
HB
RC
SDCA
CG
LM
EC
LH
SO
DC
4 Point Crown – For Component Pin contacting
Multi – Point Serrated Crown for wide range of applications
Agressive Tri-Sided Tip – Created for Open Vias with 3 contacting edges
90° Tri – Sided Tip – for Open Vias and Test Pads
6 Shaped Edges – Excellent for Open Vias applications
Passive 4 Sided Dagger Tip – For Plated Open Vias
Special Tip 150 ° angle - for Lead-free Open Vias and PadsPassive Tip with smooth surface – No Mark after
Test on Test Pads
Agressive Dagger Tip – Perfect for ICT, Open Vias and Testpads
Passive 90° Tip – Used to test on Open Vias and Sealing Lacque
4 Point Crown – Self Cleaning Tip for Component Pin contacting
Agressive Tri Needle Tip – Ideal solutions for contaminated PCBs
8 Blade Tip – Suitable for contaminated pin contacting
3 Points Agressive Contact – Self Cleaning contact for Lead-free Applications
Classic Passive Tip – leaves No Mark after test on Test Pads Medium Passive Tip – leaves No Mark on Test Pads
3 Finger Tip – Unwashed PCBs and contaminated Test Points – Self Cleaning
6 Blade Tip – Bead contacting and Self Cleaning design
6 Points plus 1 Middle Point – Universal Usage for test points
Plastic Cup around Serrated Crown– Designed for Component Presence Check
SG
LA
PCPA
LB
LK
Crown Lead - Free
Crown Engraver
Engraver
Lead - Free
Lead - Free
Lead - Free
Lead - Free
Hexagonal
Crown Spider
SpiderSpider
Round
Detector
Round
Flat
PeakedPeaked
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
LEA
D -
FR
EE
TIP
PR
ESS
ING
BIT
Technical Information
Overview Insertion / Extraction Tools
Inse
rtio
n /
Extr
acti
on T
ools
Technical Information
Tip Styles and Applications
UB
TA
UH UL
TB
UE
Passive Tip with Inverse Cone – Perfect for Wire - Wrap Posts & Connector Pins
Extremely Agressive but very stable Tip – perfect choice for contaminated PCBs
Rigid Inverse Cone – Designed for Component & Wire - Wrap Pin contacting
Unicorn – very stable Tip Style - Recommended for Copper and Solder Pads
30° Angled Medium Agressive Tip – for Test Pads 90° Conical Tip – for Plated Open Vias – No mark after test on Open Vias
Tapered
Unicorn
Unicorn
Unicorn
Unicorn
Tapered
Test Probe Hitting Accuracy depends on several things at the same time. In general it is influenced by the following factors:
1. Test Fixture Probe Plate Drilling Accuracy2. Test Fixture Guiding Accuracy3. Tolerance of Sockets / Receptacles4. Wobbling Effect of Test Probe’s Plungers
In general we can say that our Test Probes Hitting Accuracy is between 0.01 – 0.08 mm, depending on actual application, and plunger design and tip style.
There are two types of plunger designs inside of a barrel, which influences the Hitting Accuracy of Test Probes.
One is a single guided and the other is a double guided type. Double guiding gives more precise hitting accuracy.
As shown on a graphic next, Hitting Accuracy and Plunger Wobbling drawings speak for itself.
For more information, please contact us at: [email protected]
Test Probe Hitting Accuracy
Mai
n Ti
p S
tyle
s an
d A
pplic
atio
ns
3 4
Insertion - Extraction Tools for Test Probes
Insertion - Extraction Tools for Sockets / Receptacles
Handle with shaft TH1 Exchangeable bit TBP
Universal Test Probe Insertion - Extraction Complete Tool - TSP
Consists:
• Sturdy and reliable Handle TH1
• Precisely manufactured Exchangeable Bit - TBP
PRESSING BITUniversal and economic insertion solution with sturdy plastic apex suitable for various Tip Styles.*
FORKHEAD BITApplicable for insertion and extraction when Test Probe Tip Diameter is bigger than plunger shaft. Different sizes are available.*
Handle with shaft TH1 Exchangeable bit TBR
Universal Sockets / Receptacles Insertion Complete Tool - TSR
Consists:
• Sturdy and reliable Handle TH1 for insertion and Handle TH2 for extraction bits.
• Precisely manufactured Exchangeable Bit - TBR
PRESSING BITUniversal and economic insertion solution with sturdy plastic apex suitable for various Sockets / Receptacles.*
CUSTOMIZED PRESSING BITPrecisely manufactured solution with sturdy, hardened apex suitable for various Sockets / Receptacles. Different sizes are available.*
SCREW IN TYPE EXTRACTION BITPrecisely manufactured tool with sturdy, hardened cutting edges. Suitable to remove inserted Sockets / Receptacles from probe plate. Different sizes are available.*
* The above entered dimensions for the tools are only for demonstration purposes, and highlight the main dimensions. The exact dimensions may vary from series to series and with different bit types. For confirmation of exact dimensions please contact us at: [email protected]
TUBE BITApplicable for Test Probes insertion when Tip Diameter not Wider than Probe Plunger Diameter. Different sizes are available.*
Following Bit Types can be ordered:
Following Bit Types can be ordered:
Extraction Tool Handle TH2
Adapter for Extraction Bit TAR1
S
0.4
0.350.3
0.250.2
0.150.1
0.050
Test Point Hi�ng Accuracy (mm)
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Insertion / Extraction Tools Insertion / Extraction Tools
Standard Test Probe Insertion / Extraction Tools Standard Test Probe Insertion / Extraction Tools
Inse
rtio
n /
Extr
acti
on T
ools
Inse
rtio
n /
Extr
acti
on T
ools
5 6
AC
TU
AL
SIZ
E
Probe Series
Insertion Set for Probes
Handle for
Insertion Tool
Insertion Bit for Probes
Insertion Set for Probes
Handle for
Insertion Tool
Insertion Bit for Probes
Insertion and Extraction
Set for Probes
Handle for
Extraction Tool
Insertion and Extraction Bit
for Probes
Max. Head Diam. [mm/
inch]
LF1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
LF1006 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
LF750 TSP7500 TH1 TBP7500 TSP7535 TH1 TBP7535 TSP7570 TH1 TBP7570 1.50/0.059
LF753 TSP7500 TH1 TBP7500 TSP7535 TH1 TBP7535 TSP7570 TH1 TBP7570 1.50/0.059
LF500 TSP7500 TH1 TBP7500 TSP5035 TH1 TBP5035 TSP5070 TH1 TBP5070 0.90/0.035
LF501 TSP7500 TH1 TBP7500 TSP5035 TH1 TBP5035 TSP5070 TH1 TBP5070 0.90/0.035
LF400 TSP7500 TH1 TBP7500 / / / / / / /
LF401 TSP7500 TH1 TBP7500 / / / / / / /
ST1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
ST1001 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
ST1006 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
ST750 TSP7500 TH1 TBP7500 TSP7535 TH1 TBP7535 TSP7570 TH1 TBP7570 1.50/0.059
ST751 TSP7500 TH1 TBP7500 TSP7535 TH1 TBP7535 TSP7570 TH1 TBP7570 1.50/0.059
ST753 TSP7500 TH1 TBP7500 TSP7535 TH1 TBP7535 TSP7570 TH1 TBP7570 1.50/0.059
ST754 TSP7500 TH1 TBP7500 TSP7535 TH1 TBP7535 TSP7570 TH1 TBP7570 1.50/0.059
ST500 TSP7500 TH1 TBP7500 TSP5035 TH1 TBP5035 TSP5070 TH1 TBP5070 0.90/0.035
ST501 TSP7500 TH1 TBP7500 TSP5035 TH1 TBP5035 TSP5070 TH1 TBP5070 0.90/0.035
ST400 TSP7500 TH1 TBP7500 / / / / / / /
ST401 TSP7500 TH1 TBP7500 / / / / / / /
MP300 TSP7500 TH1 TBP7500 / / / / / / /
ST510 TSP7500 TH1 TBP7500 TSP5035 TH1 TBP5035 TSP5070 TH1 TBP5070 0.90/0.035
ST755 TSP7500 TH1 TBP7500 / / / TSP7570 TH1 TBP7570 1.50/0.059
ST1011 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
ST1020 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
ST1023 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
ST1028 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
ST1030 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
ST1013 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
ST1014 TSP10000 TH1 TBP10000 / / / TSP11870 TH1 TBP11870 2.20/0.086
ST1015 TSP10000 TH1 TBP10000 / / / TSP11870 TH1 TBP11870 2.20/0.086
ST1016 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
ST1018 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
ST1019 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
ST1034 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
ST1036 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
ST1250 TSP10000 TH1 TBP10000 / / / TSP12570 TH1 TBP12570 2.50/0.098
ST1608 TSP16000 TH1 TBP16000 TSP16035 TH1 TBP16035 TSP16070 TH1 TBP16070 3.50/0.138
ST1609 TSP16000 TH1 TBP16000 TSP16035 TH1 TBP16035 TSP16070 TH1 TBP16070 3.50/0.138
ST1615 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
ST1616 TSP16000 TH1 TBP16000 TSP16035 TH1 TBP16035 TSP16070 TH1 TBP16070 3.50/0.138
ST1800 TSP20000 TH1 TBP20000 TSP18735 TH1 TBP18735 TSP18770 TH1 TBP18770 4.00/0.157
ST1870 TSP20000 TH1 TBP20000 TSP18736 TH1 TBP18736 TSP18771 TH1 TBP18771 4.00/0.157
IT1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
BIT1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
IT1001 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
BIT1001 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
IT1002 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
Probe Series
Insertion Set for Probes
Handle for
Insertion Tool
Insertion Bit for Probes
Insertion Set for Probes
Handle for
Insertion Tool
Insertion Bit for Probes
Insertion and Extraction
Set for Probes
Handle for
Extraction Tool
Insertion and Extraction Bit
for Probes
Max. Head Diam. [mm/
inch]
IT1003 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
IT1004 TSP10000 TH1 TBP10000 / / / TSP10071 TH1 TBP10071 3.00/0.118
IT1007 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
IT1014 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
IT1250 TSP10000 TH1 TBP10000 / / / TSP12571 TH1 TBP12571 2.50/0.0.98
FC1000 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
FC1001 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
FC1010 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
HC1001 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1002 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1003 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1004 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1005 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1007 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1008 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1033 TSP10000 TH1 TBP10000 / / / TSP10070 TH1 TBP10070 2.00/0.079
HC1600 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
HC1601 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
HC1602 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
HC1608 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
HC2000 TSP20000 TH1 TBP20000 / / / TSP20070 TH1 TBP20070 4.00/0.157
HC2001 TSP20000 TH1 TBP20000 / / / TSP20070 TH1 TBP20070 4.00/0.157
SW750 TSP7500 TH1 TBP7500 / / / TSP7570 TH1 TBP7570 1.50/0.059
SW1000 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
SW1001 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
SW1002 TSP10000 TH1 TBP10000 TSP10035 TH1 TBP10035 TSP10070 TH1 TBP10070 2.00/0.079
SW1400 TSP16000 TH1 TBP16000 TSP16035 TH1 TBP16035 TSP14070 TH1 TBP14070 3.00/0.118
SWO1400 TSP16000 TH1 TBP16000 / / / TSP14070 TH1 TBP14070 3.00/0.118
NRSW1400 TSP16000 TH1 TBP16000 TSP16035 TH1 TBP16035 TSP14070 TH1 TBP14070 3.00/0.118
PN1000 TSP10000 TH1 TBP10000 / / / / / / /
PN1001 TSP10000 TH1 TBP10000 / / / / / / /
PN1002 TSP10000 TH1 TBP10000 / / / / / / /
PN1003 TSP10000 TH1 TBP10000 / / / / / / /
PN1401 TSP16000 TH1 TBP16000 / / / / / / /
PN1402 TSP16000 TH1 TBP16000 / / / / / / /
BP1000 TSP10000 TH1 TBP10000 TSP10036 TH1 TBP10036 TSP11870 TH1 TBP11870 2.20/0.086
BP1002 TSP10000 TH1 TBP10000 TSP10036 TH1 TBP10036 TSP10070 TH1 TBP10070 2.00/0.079
BP1003 TSP10000 TH1 TBP10000 / / / / / / /
BP1004 TSP10000 TH1 TBP10000 / / / / / / /
BP1200 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
BP1203 TSP10000 TH1 TBP10000 TSP11835 TH1 TBP11835 TSP11870 TH1 TBP11870 2.20/0.086
BP1601 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
BP1602 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
BP1604 TSP16000 TH1 TBP16000 / / / TSP16070 TH1 TBP16070 3.50/0.138
BP2601 TSP30000 TH1 TBP75000 TSP25635 TH1 TBP25635 / / / /
KP2560 TSP30000 TH1 TBP75000 / / / TSP25670 TH1 TBP25670 6.00/0.236
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Insertion / Extraction Tools Insertion / Extraction Tools
Special & Threaded Test Probe Insertion / Extraction Tools Socket / Receptacle ▪ Insertion / Extraction Tools
Inse
rtio
n /
Extr
acti
on T
ools
Inse
rtio
n /
Extr
acti
on T
ools
7 8
Special Test Probe Insertion / Extraction Tools Socket / Receptacle ▪ Insertion / Extraction Tools
Threaded Test Probe Insertion / Extraction Tools
AC
TU
AL
SIZ
E
Probe Series Insertion Set for Probes
Handle for Insertion
Tool
Insertion Bit for Probes
Insertion and Extraction Set for
Probes
Handle for
Extraction Tool
Insertion and Extraction Bit
for Probes
Max. Head Diam. [mm/inch]
ST1000 CG09 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
ST1000 CG010 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
ST1000 DC94 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
ST1001 DC93 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
ST1020 N CG58 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
ST1013 R CG58 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1013 FA05 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1013 TA07 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1014 R CG08 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1015 R CG08 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1016 R CG58 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1017 R CG08 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1019 ER58 TSP10000 TH1 TBP10000 TSP12570 TH1 TBP12570 2.50/0.098
ST1608 CG58 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
ST1609 CG58 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
ST1609 TA56 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
ST1609 R UB53 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
ST1615 CG55 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
ST1615 FA85 TSP30000 TH1 TBP75000 TSP16071 TH1 TBP16071 6.50/0.256
ST1616 R CG06 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
HC1000 CG07 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
HC1001 CG07 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
HC1033 CG07 TSP10000 TH1 TBP10000 TSP10071 TH1 TBP10071 3.00/0.118
HC1600 CG05 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
HC1602 CG05 TSP16000 TH1 TBP16000 TSP18770 TH1 TBP18770 4.00/0.157
SW1400 IW96 TSP30000 TH1 TBP75000 TSP16071 TH1 TBP16071 6.50/0.256
SWO1400 IW94 TSP16000 TH1 TBP16000 TSP16071 TH1 TBP16071 6.50/0.256
SWO1400 IW95 TSP30000 TH1 TBP75000 TSP16071 TH1 TBP16071 6.50/0.256
NRSW1400 WD 53 TSP16000 TH1 TBP16000 TSP16071 TH1 TBP16071 6.50/0.256
BP1000 EP03 TSP16000 TH1 TBP16000 TSP10072 TH1 TBP10072 4.00/0.157
BP1000 EP04 TSP16000 TH1 TBP16000 TSP10072 TH1 TBP10072 4.00/0.157
BP1000 EQ03 TSP16000 TH1 TBP16000 TSP10072 TH1 TBP10072 4.00/0.157
Series Insertion Bit for Probes Insertion and Extraction Bit for Probes
SWTB2560 / / TBT30070
KPT2560 / / TBT25670
Receptacle Series
Insertion Set for Receptacle
Handle for Insertion
Tool
Insertion Bit for Receptacle
Extraction Set for Receptacle
Handle for Extraction
Tool
Adapter for Extraction Bit
Extraction Bit for Receptacle
RCP066 TSR10035 TH1 TBR10035 TSR10070 TH2 TAR1 TBR10070
RCP052 TSR7535 TH1 TBR7535 TSR7570 TH2 TAR1 TBR7570
RCP037 TSR5035 TH1 TBR5035 TSR5070 TH2 TAR1 TBR5070
RCP030 TSR4035 TH1 TBR4035 TSR4070 TH2 TAR1 TBR4070
RCP021 TSR3035 TH1 TBR3035 / / / /
RCP034 TSR5036 TH1 TBR5036 TSR5070 TH2 TAR1 TBR5070
RCP079 TSR10036 TH1 TBR10036 TSR10071 TH2 TAR1 TBR10071
RCP093 TSR12535 TH1 TBR12535 TSR12570 TH2 TAR1 TBR12570
RCP118 TSR16035 TH1 TBR16035 TSR16070 TH2 TAR1 TBR16070
RCP138 TSR16036 TH1 TBR16036 TSR16071 TH2 TAR1 TBR16071
RCP106 TSR18735 TH1 TBR18735 TSR18770 TH2 TAR1 TBR18770
RCP139 TSR18736 TH1 TBR18736 TSR16071 TH2 TAR1 TBR16071
RCP157 TSR20035 TH1 TBR20035 TSR20070 TH2 TAR1 TBR20070
RCT256 TSR30035 TH1 TBR30035 TSR30070 TH2 TAR1 TBR30070
RCP094 TSR10037 TH1 TBR10037 TSR12570 TH2 TAR1 TBR12570
RCP134 TSR14035 TH1 TBR14035 TSR16071 TH2 TAR1 TBR16071
RCP065U TSR10035 TH1 TBR10035 TSR10070 TH2 TAR1 TBR10070
RCP091 TSR12535 TH1 TBR12535 TSR12570 TH2 TAR1 TBR12570
RCP220 TSR25636 TH1 TBR25636 TSR25671 TH2 TAR1 TBR25671
RCP185 TSR25635 TH1 TBR25635 TSR25670 TH2 TAR1 TBR25670
RCP217 TSR25637 TH1 TBR25637 TSR25671 TH2 TAR1 TBR25671
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
9 10
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
ER 5 6 /SP170/+ 1.70 0.067
LA 5 3 0.91 0.036
LC 5 3 0.91 0.036
LF 5 3 0.91 0.036
UH 5 4 0.91 0.036
LF10
00
AC
TU
AL
SIZ
E
Lead
-fre
e ▪ I
CT ▪ 1
00 M
il /
2.54
mm
LF1000 Lead-free Test Probes Tip Styles LF1000LF
1000
LF1000 series Lead-free Test Probes are the ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 2.00 7.2
L 3.00 10.8
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Material
Code Material
5 Steel
AC
TUA
L S
IZE
Lead
-fre
e ▪ I
CT ▪ 1
00 M
il /
2.54
mm
Recommended Socket / Receptacle Series for Lead-free Test Probes LF1000 is RCP066. See Page 27 - 29 for detailed information.
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
≡ Test Probes Ordering Code Example ≡ Special Tip Diameter Probes Ordering Code Example
LF1000 N LA 5 3 Ma b c d e f g
LF1000 N ER 5 6 M SP170a b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Installation Heights with different Sockets / Receptacles
Installation Height varies of a type of Socket / Receptacle that is being used!
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR03x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
+ Special Tip Diameter Code
For detailed Sockets / Receptacles for LF1000 See Page 27 - 29.
Tool for LF1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion BitTBP10035
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡11 12
LF10
06
Lead
-fre
e ▪ I
CT
- FC
T ▪ 1
00 M
il /
2.54
mm
LF10
06
Lead
-fre
e ▪ I
CT
- FC
T ▪ 1
00 M
il /
2.54
mm
LF1006 Lead-free Test Probes Tip Styles LF1006
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
AC
TU
AL
SIZ
E
Series LF1006 is a long-stroke version of Lead-free Test Probes series LF1000. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 9.3 mm [0.366]
Full Stroke: 11.7 mm [0.461]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for ICT Test Probes LF1006 is RCP066.
See Page 27 - 29 for detailed information.
≡ Test Probes Ordering Code Example
LF1006 N LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
≡ Tip Diameter Code changes according to the Tip Style.
AC
TUA
L S
IZE
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CC
5 3 0.50 0.020
5 7 1.30 0.051
5 8 1.50 0.059
CG0 3 1.30 0.051
0 4 1.50 0.059
ER 0 3 1.50 0.059
LA 5 3 0.91 0.036
SG 5 2 1.30 0.051
TA 0 3 1.30 0.051
For detailed Sockets / Receptacles for LF1006 See Page 27 - 29.
Installation Height
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR03x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 2.00 7.2
L 3.00 10.8 Plunger Plating
Code Material
No letter Hard Gold
Plunger Material
Code Material
0 BeCu
5 Steel
Tool for LF1006 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion BitTBP10035
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
*Due to high-preloaded springs the life expectancy of these probes are less, then for standard LF series.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡13 14
LF75
0
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Lead
-fre
e ▪ I
CT ▪ 7
5 M
il /
1.91
mm
Lead
-fre
e ▪ I
CT ▪ 7
5 M
il /
1.91
mm
LF75
0
LF750 series Lead-free Test Probes are the ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 2.00 7.2
NX 2.80 10.1
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
CC 5 4 0.67 0.026
LA 5 4 0.67 0.026
LC 5 4 0.67 0.026
LF 5 4 0.67 0.026
UH 5 4 0.67 0.026
LF750 Lead-free Test Probes Tip Styles LF750
Centers 75 Mil / 1.91 mm Centers 75 Mil / 1.91 mm
≡ Test Probes Ordering Code Example
LF750 N LA 5 4 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if diffferent.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Lead-free Test Probes LF750 is RCP052. See Page 37 - 38 for detailed information.
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height varies of a type of Socket / Receptacle that is being used!
Installation Heights with different Sockets / Receptacles
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for LF750 See Page 37 - 38.
Tool for LF750 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Insertion BitTBP7535
Insertion & Extraction Bit
TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP052 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Universal Pressing BitTBP7500
Customized Pressing BitTBR7535
Extraction BitTBR7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡15 16
LF75
3
Lead
-fre
e ▪ I
CT
- FC
T ▪ 7
5 M
il /
1.91
mm
LF75
3
Lead
-fre
e ▪ I
CT
- FC
T ▪
75 M
il /
1.91
mm
LF753 Lead-free Test Probes Tip Styles LF753
Centers 75 Mil / 1.91 mm Centers 75 Mil / 1.91 mm
AC
TU
AL
SIZ
E
Technical Specifications
Recommended Working Stroke: 8.00 mm [0.315]
Full Stroke: 10.00 mm [0.394]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Test Probes Ordering Code Example
LF753 N LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Recommended Socket / Receptacle Series for ICT / FCT Test Probes LF753 is RCP052. See Page 37 - 38 for detailed information.
AC
TUA
L S
IZE
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LA 5 3 0.67 0.026
≡ Tip Diameter Code changes according to the Tip Style.
Installation Heights with different Sockets / Receptacles
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height varies of a type of Socket / Receptacle that is being used!∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected] For detailed Sockets / Receptacles for LF753 See Page 37 - 38.
*Other Tip Styles available on request.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 2.00 7.2
NX 2.80 10.1
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
Tool for LF753 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Series LF753 is a long-stroke version of Lead-free Test Probes series LF750. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Universal Pressing BitTBP7500
Insertion BitTBP7535
Insertion & Extraction Bit
TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
*Due to high-preloaded springs the life expectancy of these probes are less, then for standard LF series.
Tool for RCP052 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Universal Pressing BitTBP7500
Customized Pressing BitTBR7535
Extraction BitTBR7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡17 18
LF50
0
Tip Style NamePlunger Material
Tip Diameter
Code
Diameter in
mm [inches]
CC 5 3 0.50 0.020
ER 5 4 0.90 0.035
LA 5 3 0.50 0.020
LC 5 4 0.50 0.020
LF 5 4 0.50 0.020
AC
TUA
L S
IZE
AC
TU
AL
SIZ
E
Lead
-fre
e ▪ I
CT ▪ 5
0 M
il /
1.27
mm
Lead
-fre
e ▪ I
CT ▪ 5
0 M
il /
1.27
mm
LF500 series Lead-free Test Probes are the ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
LF500 N LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
LF50
0 LF500 Lead-free Test Probes Tip Styles LF500
Centers 50 Mil / 1.27 mm Centers 50 Mil / 1.27 mm
Recommended Socket / Receptacle Series for Lead-free Test Probes LF500 is RCP037. See Page 49 - 50 for detailed information.
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height varies of a type of Socket / Receptacle that is being used!
Installation Heights with different Sockets / Receptacles
Tool for RCP037 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) -
has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR5035
Extraction BitTBR5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 2.00 7.2
For detailed Sockets / Receptacles for LF500 See Page 49 - 50.Tool for LF500 Series Test Probes Contains:
Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Insertion BitTBP5035
Insertion & Extraction Bit
TBP5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example
RCP037 N SR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP037 VR03 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
*Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡19 20
AC
TU
AL
SIZ
E
Lead
-fre
e ▪ I
CT
- FC
T ▪ 5
0 M
il /
1.27
mm
Series LF501 is a long-stroke version of Lead-free Test Probe series ST500. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Test Probes Ordering Code Example
LF501 N LA 5 3 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
LF50
1 LF501 Lead-free Test Probes
Centers 50 Mil / 1.27 mm
LF50
1 A
CTU
AL
SIZ
E
Lead
-fre
e ▪ I
CT
- FC
T ▪ 5
0 M
il /
1.27
mm
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LA 5 3 0.50 0.020
LF 5 3 0.50 0.020
Tip Styles LF501
Centers 50 Mil / 1.27 mm
Recommended Socket / Receptacle Series for ICT Test Probes LF501 is RCP037.
See Page 49 - 50 for detailed information.
Installation Height varies of a type of Socket / Receptacle that is being used!
Installation Heights with different Sockets / Receptacles
Tool for RCP037 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR5035
Extraction BitTBR5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
For detailed Sockets / Receptacles for ST500 See Page 49 - 50.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 2.00 7.2
Tool for LF501 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Insertion BitTBP5035
Insertion & Extraction Bit
TBP5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example
RCP037 N SR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP037 VR03 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
* Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
*Due to high-preloaded springs the life expectancy of these probes are less, then for standard LF series.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡21 22
LF40
0
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Lead
-fre
e ▪ I
CT ▪ 4
0 M
il /
1.00
mm
Lead
-fre
e ▪ I
CT ▪ 4
0 M
il /
1.00
mm
LF40
0
LF400 series Lead-free Test Probes are the ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
L 2.00 7.2
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
CC 5 3 0.41 0.016
LA 5 3 0.41 0.016
LB 5 3 0.41 0.016
LF 5 3 0.41 0.016
LG 5 3 0.41 0.016
LF400 Lead-free Test Probes Tip Styles LF400
Centers 40 Mil / 1.00 mm Centers 40 Mil / 1.00 mm
≡ Test Probes Ordering Code Example
LF400 N LA 5 3 La b c d e f
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Lead-free Test Probes LF400 is RCP030.
See Page 55 - 56 - 56 for detailed information.
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height varies of a type of Socket / Receptacle that is being used!
Installation Heights with different Sockets / Receptacles
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for LF400 See Page 55 - 56.
Tool for LF400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP030 VR04 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
≡ Socket / Receptacle Ordering Code Example
RCP030 N CR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
*Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
Tool for RCP030 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR4035
Extraction BitTBR4070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡23 24
LF40
1
AC
TU
AL
SIZ
E
Lead
-fre
e ▪ I
CT
- FC
T▪ 4
0 M
il /
1.00
mm
LF401 series is a long-stroke version of Lead-free Test Probe series LF400. Ideal choice for contacting problems caused by Lead-free type solder materials. With the special tip styles and combined with a higher pre-load force, this series offers an ideal solution to those test challenges related to Lead-free solder alloys.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 2 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 10 °C up to + 120 °C [- 14 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
AC
TUA
L S
IZE
Lead
-fre
e ▪ I
CT
- FC
T 40
Mil
/ 1.
00 m
m
LF40
1
Recommended Socket / Receptacle Series for ICT / FCT Test Probes LF401 is RCP030. See Page 55 - 56 for detailed information.
Plunger Plating
Code Material
No letter Hard Gold
Plunger Material
Code Material
5 Steel
≡ Test Probes Ordering Code Example
LF401 N LA 5 3 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
1
LF401 Lead-free Test Probes
Centers 40 Mil / 1.00 mm
Tip Styles LF401
Centers 40 Mil / 1.00 mm
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Installation Height with different Sockets / Receptacles
For detailed Sockets / Receptacles for LF401 See Page 55 - 56.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
L 2.00 7.2
Tool for LF401 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LF 5 3 0.41 0.016
≡ Tip Diameter Code changes according to the Tip Style.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP030 VR04 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
≡ Socket / Receptacle Ordering Code Example
RCP030 N CR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
*Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
*Due to high-preloaded springs the life expectancy of these probes are less, then for standard LF series.
Tool for RCP030 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR4035
Extraction BitTBR4070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
ST1
000
2625
AC
TU
AL
SIZ
E
ICT ▪ 1
00 M
il /
2.54
mm
ST1000 ICT Test Probes Tip Styles ST1000S
T100
0
These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high hitting accuracy and long-life expectancy, and are therefore the best solution for high-quality testing results.
Spring Force at Working Stroke (2/3)Code Rated force
(N) [oz]
S 1.00 3.6
M 1.50 5.4
N 2.00 7.2
NX 2.20 7.9
LX 3.00 10.8
X 4.00 14.4
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Note: Probe Tips assembled with Plastic parts may differ!
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger PlatingCode Material
No letter Hard Gold
≡ Tip Diameter Code changes according to the Tip Style.
Plunger MaterialCode Material
0 BeCu
5 Steel
9 Plastic
AC
TUA
L S
IZE
ICT ▪ 1
00 M
il /
2.54
mm
Recommended Socket / Receptacle Series for ICT Test Probes ST1000 is RCP066.
See Page 27 - 29 for detailed information.
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
Tool for ST1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR03x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CA5 6 1.30 0.051
5 7 1.50 0.059
CB 5 4 1.06 0.042
CC
5 4 0.50 0.020
5 5 0.80 0.031
5 8 1.30 0.051
5 9 1.50 0.059
CG
0 5 1.30 0.051
0 6 1.50 0.059
0 8 2.00 0.079
0 8 /SP229/+ 2.29 0.090
0 9 2.50 0.098
0 10 3.00 0.118
DC 9 4 2.25 0.089
EC 5 3 0.91 0.036
ER 0 5 1.50 0.059
FA 0 6 1.50 0.059
≡ Bead Probe - More data on Page 30
HK 5 5 1.70 0.067
LA5 3 0.91 0.036
5 5 1.30 0.051
LB 5 3 0.91 0.036
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
LC 5 3 0.91 0.036
LF 5 3 0.91 0.036
PA 5 3 1.60 0.063
PC 5 3 1.50 0.059
RA
0 4 0.64 0.025
0 5 0.91 0.036
0 7 1.30 0.051
RC 0 3 0.91 0.036
SD5 5 1.30 0.051
5 7 1.50 0.059
SG 5 4 1.50 0.059
TA 0 4 1.50 0.059
TB 0 4 1.80 0.071
UB 5 3 0.91 0.036
UH 5 3 0.91 0.036
≡ Test Probes Ordering Code Example ≡ Special Tip Diameter Probes Ordering Code Example
ST1000 N LA 5 3 Na b c d e f g
ST1000 N CG 0 8 S SP229a b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
+ Special Tip Diameter Code
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
RC
P06
6S
ocke
ts /
Rec
epta
cles
▪ 10
0 M
il /
2.54
mm
27
Sockets / Receptacles for ST1000 RCP066RCP066 Sockets / Receptacles for ST1000
AC
TU
AL
SIZ
E
RC
P06
6S
ocke
ts /
Rec
epta
cles
▪ 10
0 M
il /
2.54
mm
28
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR03x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Design Code Description
WR Wire-Wrap Square Post
SR Solderable
Usage of Sockets / Receptacles
Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.
Technical Specifications
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Round & Square Post: Brass / Phosphor Bronze
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
RCP066 WR03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
vacuum sealed
Plating: Hard Gold
RCP066 WR08
Installation Height• Fixed: 13.00 mm [0.512]
• Variable: variable
• Feature: press - ring
vacuum sealed
Plating: Hard Gold
RCP066 WR11
Installation Height• Fixed: 14.50 mm [0.571]
• Variable: variable
• Feature: press - ring
vacuum sealed
Plating: Hard Gold
RCP066 WR13
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
vacuum sealed
Plating: Hard Gold
RCP066 WL09
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
vacuum sealed
Plating: Hard Gold
RCP066 WR14
Installation Height• Fixed: 20.50 mm [0.807]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
Type Information and Installation Height Data with inserted Test Probes ST1000*
Installation Heights with different Sockets / Receptacles
Compatible Series for RCP066:
LF1000
LF1006
ST1000
ST1000 Bead
ST1001
ST1006
IT1003 (WR13)
IT1004 (WR13)
FC1001 (WR13)
*for wireless connection
RC
P06
6A
CT
UA
L S
IZE
29
RCP066 SR07
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP066 SR08
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP066 SR10
Installation Height• Fixed: 20.50 mm [0.807]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
30
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
RCP066 Sockets / Receptacles for ST1000 Bead Probes ST1000
ST1
000
AC
TUA
L S
IZE
Bea
d P
robe
s ▪ 1
00 M
il /
2.54
mm
Recommended Socket / Receptacle Series for Bead Probes ST1000 is RCP066. See Page 27 - 29 for detailed information.
These Spring-loaded Test Probes are typically used in ICT Test Fixtures for PCBs that have been manufactured with the bead probe technology (i.e. the application of small solder beads on the conductor line surfaces and for micro-vias.
≡ Test Probes Ordering Code Example
ST1000 N FA 0 6 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force (N)
M 1.50
N 2.00
LX 3.00
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [.250]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Plating
Code Material
No letter Hard Gold
Plunger Material
Code Material
0 BeCu
Tool for RCP066 Sockets / Receptacles Contains Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10035 TBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Heights with different Sockets / Receptacles
Installation Height varies of a type of Socket / Receptacle that is being used!
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N SR07x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Soc
kets
/ R
ecep
tacl
es ▪
100
Mil
/ 2.
54 m
m
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
FA 0 6 1.50 0.059
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡31 32
ST1
001
AC
TU
AL
SIZ
E
ICT ▪ 1
00 M
il /
2.54
mm
ST1
001
The series ST1001 is an extended version of the Test Probes series ST1000, and are therefore also typically used in ICT Test Fixtures. They have high hitting accuracy and long-life expectancy, and are therefore the best solution for high-quality testing results.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
N 2.00 7.2
LX 3.00 10.8
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Note: Probe Tips assembled with Plastic parts may differ!
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
0 BeCu
5 Steel
9 Plastic
Plunger Plating
Code Material
No letter Hard Gold
AC
TUA
L S
IZE
ICT ▪ 1
00 M
il /
2.54
mm
Recommended Socket / Receptacle Series for ICT Test Probes ST1001 is RCP066.
See Page 27 - 29 for detailed information.
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CA 5 4 1.30 0.051
CC5 3 0.50 0.020
5 7 1.30 0.051
CG0 5 1.50 0.059
0 6 2.00 0.079
DC 9 3 2.25 0.089
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
ER5 4 1.50 0.059
0 5 1.70 0.067
LA 5 3 0.90 0.035
SG 5 3 1.50 0.059
TA 0 3 1.50 0.059
ST1001 ICT Test Probes Tip Styles ST1001
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
≡ Test Probes Ordering Code Example
ST1001 N CG 0 5 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Installation Height varies of a type of Socket / Receptacle that is being used!
≡ Tip Diameter Code changes according to the Tip Style.
Installation Heights with different Sockets / Receptacles
Tool for ST1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR03x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
For detailed Sockets / Receptacles for ST1001 See Page 27 - 29.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡ 3433
AC
TU
AL
SIZ
E
ICT
/ FC
T ▪ 1
00 M
il /
2.54
mm
ST1
006
Series ST1006 is a long-stroke version of Test Probe series ST1000. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 9.3 mm [0.366]
Full Stroke: 11.7 mm [0.461]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
0 BeCu
5 Steel
Plunger Plating
Code Material
No letter Hard GoldRecommended Socket / Receptacle Series for
ICT Test Probes ST1006 is RCP066.See Page 27 - 29 for detailed information.
ST1006 ICT / FCT Test Probes
Centers 100 Mil / 2.54 mm
≡ Test Probes Ordering Code Example
ST1006 N LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
ST1
006
≡ Tip Diameter Code changes according to the Tip Style.
AC
TUA
L S
IZE
ICT
/ FC
T ▪ 1
00 M
il /
2.54
mm
Tip StylePlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CC
5 3 0.50 0.020
5 7 1.30 0.051
5 8 1.50 0.059
CG0 3 1.30 0.051
0 4 1.50 0.059
ER 0 3 1.50 0.059
LA 5 3 0.91 0.036
SG 5 2 1.30 0.051
TA 0 3 1.30 0.051
Tip Styles ST1006
Centers 100 Mil / 2.54 mm
For detailed Sockets / Receptacles for ST1006 See Page 27 - 29.
Installation Height
Tool for ST1006 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
N 2.00 7.2
LX 3.00 10.8
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR03x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
RCP066 WR03
Installation Height• Fixed: 19.70 mm [0.780]
• Variable: variable
• Feature: press - ring
vaccuum sealed
Plating: Hard Gold
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡35 36
ST7
50
AC
TU
AL
SIZ
E
ICT ▪ 7
5 M
il /
1.91
mm
ICT ▪ 7
5 M
il /
1.91
mm
ST7
50
These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
US 0.60 2.2
S 1.00 3.6
M 1.50 5.4
N 2.00 7.2
X 2.80 10.1
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
CA 5 8 1.15 0.045
CB 5 5 1.00 0.039
CC5 4 0.50 0.020
5 5 0.64 0.025
EC 5 3 0.64 0.025
ER 5 3 0.64 0.025
HK 5 3 1.20 0.047
LA 5 3 0.64 0.025
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LB 5 3 0.64 0.025
LC 5 3 0.64 0.025
RA 0 4 0.64 0.025
SG 5 3 1.20 0.047
TA 0 5 1.20 0.047
UB 5 3 0.64 0.025
UH 5 3 0.64 0.025
ST750 ICT Test Probes Tip Styles ST750
Centers 75 Mil / 1.91 mm Centers 75 Mil / 1.91 mm
≡ Test Probes Ordering Code Example
ST750 N CB 5 5 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for ICT Test Probes ST750 is RCP052.
See Page 37 - 38 for detailed information.
≡ Tip Diameter Code changes according to the Tip Style.
Tool for ST750 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP7535 TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Tool for RCP052 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP7500 TBR7535 TBR7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡37 38
RC
P05
2
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Centers 75 Mil / 1.91 mmCenters 75 Mil / 1.91 mm
Soc
kets
/ R
ecep
tacl
es ▪
75 M
il /
1.91
mm
RC
P05
2S
ocke
ts /
Rec
epta
cles
▪ 75
Mil
/ 1.
91 m
m
Sockets / Receptacles for ST750 RCP052RCP052 Sockets / Receptacles for ST750
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Usage of Sockets/Receptacles
Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.
RCP052 WR05
Installation Height• Fixed: 10.50 mm [0.414]
• Variable: variable
• Feature: press - ring
vacuum sealedPlating: Hard Gold
RCP052 WR09
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
vacuum sealedPlating: Hard Gold
Technical Specifications
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Round & Square Post: Brass / Phosphor Bronze
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
RCP052 SR03
Installation Height• Fixed: 10.50 mm [0.414]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP052 WR10
Installation Height• Fixed: 18.00 mm [0.709]
• Variable: variable
• Feature: press - ring
vacuum sealedPlating: Hard Gold
Design Code Description
WR Wire-Wrap Square Post
SR Solderable
Type Information and Installation Height Data with inserted Test Probes ST750*
Installation Heights with different Sockets / Receptacles
Tool for RCP052 Sockets / Receptacles Contains Tool Handle + Exchangeable Bit(s)*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP7500 TBR7535 TBR7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
RCP052 SR06
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP052 WL03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Compatible Series for RCP052:
LF750
LF753
ST750
ST751
ST753
ST754
*for wireless connection
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡39 40
ST7
51
AC
TU
AL
SIZ
E
ICT ▪ 7
5 M
il /
1.91
mm
ST7
51
The series ST751 is a longer version of the Test Probes series ST750, and are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.00 3.6
M 1.50 5.4
N 2.00 7.2
X 2.80 10.1
≡ Tip Diameter Code changes according to the Tip Style.
AC
TUA
L S
IZE
ICT ▪ 7
5 M
il /
1.91
mm
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
1LA 5 3 0.64 0.025
UB 5 3 0.64 0.025
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
ST751 ICT Test Probes Tip Styles ST751
Centers 75 Mil / 1.91 mm Centers 75 Mil / 1.91 mm
Recommended Socket / Receptacle Series for ICT Probe ST751 is RCP052.
See Page 37 - 38 for detailed information.
≡ Test Probes Ordering Code Example
ST751 N 1LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Installation Height varies of a type of Socket / Receptacle that is being used!
Installation Heights with different Sockets / Receptacles
Tool for ST751 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP7535 TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
For detailed Sockets / Receptacles for ST751 See Page 37 - 38.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡41 42
AC
TU
AL
SIZ
E
ICT
/ FC
T ▪ 7
5 M
il /
1.91
mm
ST7
53
Series ST753 is a long-stroke version of Test Probe series ST750. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fix-tures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 8.00 mm [0.315]
Full Stroke: 10.00 mm [0.394]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 1.2 4.3
ST753 ICT /FCT Test Probes
Centers 75 Mil / 1.91 mm
≡ Test Probes Ordering Code Example
ST753 N LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for ICT / FCT Test Probes ST753 is RCP052. See Page 37 - 38 for detailed information.
ST7
53
AC
TUA
L S
IZE
ICT
/ FC
T ▪ 7
5 M
il /
1.91
mm
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LA 5 3 0.67 0.026
≡ Tip Diameter Code changes according to the Tip Style.
Tip Styles ST753
Centers 75 Mil / 1.91 mm
Installation Heights with different Sockets / Receptacles
Tool for ST753 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP7535 TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height varies of a type of Socket / Receptacle that is being used!
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for ST753 See Page 37 - 38.
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡ 4443
AC
TU
AL
SIZ
E
ICT
/ FC
T ▪ 7
5 M
il /
1.91
mm
ST7
54
The series ST754 is long-stroke version of the Test Probe series ST750. These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 8 mm [0.314]
Full Stroke: 10 mm [0.393]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
ST754 ICT / FCT Test Probes
Centers 75 Mil / 1.91 mm
≡ Test Probes Ordering Code Example
ST754 N LA 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard GoldRecommended Socket / Receptacle Series for
ICT / FCT Test Probes ST754 is RCP052. See Page 37 - 38 for detailed information.
ST7
54
ICT
/ FC
T ▪ 7
5 M
il /
1.91
mm
≡ Tip Diameter Code changes according to the Tip Style.
Tip Styles ST754
Centers 75 Mil / 1.91 mm
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LA 5 3 0.64 0.025
AC
TUA
L S
IZE
Installation Heights with different Sockets / Receptacles
Tool for ST754 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP7535 TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 1.2 4.3
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N WR05x y z
Code Material
No letter Hard Gold*
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height varies of a type of Socket / Receptacle that is being used!
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for ST754 See Page 37 - 38.
*Other Tip Styles available on request.
45 46≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
ST5
00
AC
TUA
L S
IZE
AC
TU
AL
SIZ
E
ICT ▪ 5
0 M
il /
1.27
mm
ICT ▪ 5
0 M
il /
1.27
mm
These spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.00 3.6
M 1.50 5.4
L 2.00 7.2
Plunger Material
Code Material
0 BeCu
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
ST500 N CG 0 4 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
ST5
00
ST500 ICT Test Probes Tip Styles ST500
Centers 50 Mil / 1.27 mm Centers 50 Mil / 1.27 mm
Recommended Socket / Receptacle Series for ICT Test Probes ST500 is RCP037.
See Page 49 - 50 for detailed information.
Tool for ST500 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP5035 TBP5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tip Style NamePlunger Material
Tip Diameter
Code
Diameter in
mm [inches]
CC 5 3 0.50 0.020
CG 0 4 0.90 0.035
LA 5 3 0.50 0.020
LB 5 3 0.50 0.020
≡ Tip Diameter Code changes according to the Tip Style.
Tool for RCP037 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR5035
Extraction BitTBR5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example
RCP037 N SR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Heights with differentSockets / Receptacles
Installation Height varies of a type of Receptacle / Socket that is being used!
For detailed Sockets / Receptacles for ST500 See Page 49 - 50.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP037 VR03 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡47 48
AC
TU
AL
SIZ
E
ICT
/ FC
T ▪ 5
0 M
il /
1.27
mm
Series ST501 is a long-stroke version of Test Probe series ST500. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.00 3.6
M 1.50 5.4
L 2.00 7.2
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
ST501 N LA 5 3 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
ST5
01
ST501 ICT / FCT Test Probes
Centers 50 Mil / 1.27 mm
ST5
01
AC
TUA
L S
IZE
ICT
/ FC
T ▪ 5
0 M
il /
1.27
mm
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LA 5 3 0.50 0.020
Tip Styles ST501
Centers 50 Mil / 1.27 mm
Recommended Socket / Receptacle Series for ICT Test Probes ST501 is RCP037.
See Page 49 - 50 for detailed information.
Installation Height varies of a type of Socket / Receptacle that is being used!
Tool for ST501 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP5035 TBP5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Heights with different Sockets / Receptacles
Tool for RCP037 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
≡ Socket / Receptacle Ordering Code Example
RCP037 N SR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP037 VR03 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
Universal Pressing BitTBP7500
Customized Pressing BitTBR5035
Extraction BitTBR5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
For detailed Sockets / Receptacles for ST500 See Page 49 - 50.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡49 50
RC
P03
7
Soc
kets
/ R
ecep
tacl
es ▪
50 M
il /
1.27
mm
49
Soc
kets
/ R
ecep
tacl
es ▪
50 M
il /
1.27
mm
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Design Code Options
WR Wire Wrap Square Post
VR Pre-wired with Kynar Wire
CR Crimp
SR Solderable
Usage of Sockets/Receptacles
Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.
Technical Specifications
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Round & Square Post: Brass / Phosphor Bronze
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
RC
P03
7 RCP037 Sockets / Receptacles for ST500 Sockets / Receptacles for ST500 RCP037
Centers 50 Mil / 1.27 mm Centers 50 Mil / 1.27 mm
RCP037 CR03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP037 CR04
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP037 SR03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
Type Information and Installation Height Data with inserted Test Probes ST500*
≡ Socket / Receptacle Ordering Code Example
RCP037 N SR03x y z
RCP037 WR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Compatible Series for RCP037:
LF500 LF501 ST500 ST501
RCP037 VR03 3035
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring vacuum sealed
Plating: Hard Gold
RCP037 WR03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring vacuum sealed
Plating: Nickel Plated
RCP037 WL13
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: press - ring vacuum sealed
Plating: Nickel Plated
Tool for RCP037 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP037 VR03 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
Universal Pressing BitTBP7500
Customized Pressing BitTBR5035
Extraction BitTBR5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Available also in double press-ring version, which offers very high stability and better
pointing accuracy.
Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
*for wireless connection
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡51 52
ST4
00
AC
TU
AL
SIZ
E
ICT ▪ 4
0 M
il /
1.00
mm
These Spring-loaded Test Probes are typically used in ICT Test Fixtures. They have high pointing accuracy and long-life expectancy.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.80 2.9
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 10 °C up to + 120 °C [- 14 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Material
Code Material
0 BeCu
5 Steel
AC
TUA
L S
IZE
ICT ▪ 4
0 M
il /
1.00
mm
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
CA 0 3 0.40 0.016
LA 5 3 0.40 0.016
LB 5 3 0.40 0.016
LC 5 3 0.40 0.016
RA 0 3 0.40 0.016
≡ Test Probes Ordering Code Example
ST400 N LA 5 3 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Recommended Socket / Receptacle Series for ICT Test Probes ST400 is RCP030.
See Page 55 - 56 for detailed information.
ST400 ICT Test Probes
Centers 40 Mil / 1.00 mm
Tip Styles ST400
Centers 40 Mil / 1.00 mmS
T400
≡ Socket / Receptacle Ordering Code Example
RCP030 N CR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP030 N VR04 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length* If letter X is in any place instead of digit means no information
about the wire length / diameter / colour is provided.
Tool for ST400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP7500 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Heights with different Sockets / Receptacles
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for ST400 See Page 55 - 56.
Tool for RCP030 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR4035
Extraction BitTBR4070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡53 54
ST4
01
AC
TU
AL
SIZ
E
ICT
/ FC
T ▪ 4
0 M
il /
1.00
mm
Series ST401 is a long-stroke version of Test Probe series ST400. Therefore this probe is an excellent choice for usage in so-called „dual-stage” (i.e. combined ICT and FCT test) Fixtures. Despite the longer stroke the Probe still offers precise hitting accuracy and long-life expectancy.
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.35 mm [0.250]
Max. Current: 2 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 10 °C up to + 120 °C [- 14 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
AC
TUA
L S
IZE
ICT
/ FC
T ▪ 4
0 M
il /
1.00
mm
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
LA 5 3 0.40 0.016
≡ Tip Diameter Code changes according to the Tip Style.
ST4
01
Recommended Socket / Receptacle Series for ICT / FCT Test Probes ST401 is RCP030. See Page 55 - 56 for detailed information.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.80 2.9
Plunger Plating
Code Material
No letter Hard Gold
Plunger Material
Code Material
5 Steel
≡ Test Probes Ordering Code Example
ST401 N LA 5 3 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
1
ST401 ICT / FCT Test Probes
Centers 40 Mil / 1.00 mm
Tip Styles ST401
Centers 40 Mil / 1.00 mm
≡ Socket / Receptacle Ordering Code Example
RCP030 N CR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP030 N VR04 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length* If letter X is in any place instead of digit means no information
about the wire length / diameter / colour is provided.
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Tool for ST401 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP7500 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Height with different Sockets / Receptacles
For detailed Sockets / Receptacles for ST401 See Page 55 - 56.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP030 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR4035
Extraction BitTBR4070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡55 56
AC
TU
AL
SIZ
E
RC
P03
0
Soc
kets
/ R
ecep
tacl
es ▪
40 M
il /
1.00
mm
Usage of Sockets/Receptacles
Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.
Equip, double press-ring Sockets / Receptacles offer very high stability and better pointing accuracy.
Technical Specifications
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Round & Square Post: Brass / Phosphor Bronze
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Soc
kets
/ R
ecep
tacl
es ▪
40 M
il /
1.00
mm
AC
TUA
L S
IZE
RCP030 Sockets / Receptacles for ST400 Sockets / Receptacles for ST400 RCP030
Centers 40 Mil / 1.00 mm Centers 40 Mil / 1.00 mmR
CP
030
Design Code Options
WR Wire Wrap Square Post
VR Pre-wired with Kynar Wire
CR Crimp
Type Information and Installation Height Data with inserted Test Probes ST400*
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP030 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*For more Technical information about Installation Heights for other Series consult with us at: [email protected]
Compatible Series for RCP030:
LF400
LF401
ST400
ST401
RCP030 CR03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: double press - ring
Plating: Hard Gold
RCP030 WR03
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
Plating: Hard Gold
RCP030 VR04 3035
Installation Height• Fixed: 16.00 mm [0.630]
• Variable: variable
• Feature: double press - ring vacuum sealed
Plating: Hard Gold
Tool for RCP030 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP030 VR04 3 0 35x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
Universal Pressing BitTBP7500
Customized Pressing BitTBR4035
Extraction BitTBR4070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Heights
w3: Wire Length
Wire length is given in inches.
Conversion Example: 35 in = approx. 900 mm
Other length and colors available on request.
w2: Wire Colour
0 Black
w1: Wire Diameter Code
AWG mm [inches]
3 30 0.26 0.010
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡57 58
AC
TUA
L S
IZE
Centers 30 Mil / 0.76 mm Centers 30 Mil / 0.76 mm
MP
300
Mic
ro P
robe
s ▪ 3
0 M
il /
0.76
mm
Mic
ro P
robe
s ▪ 3
0 M
il /
0.76
mm
AC
TU
AL
SIZ
E
MP300 Micro Probes
MP
300 Tip Styles MP300
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CC 5 3 - 0.28 0.011
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for small size Micro Probes MP300 is RCP021
See Page 58 for detailed information.
≡ Test Probes Ordering Code Example
MP300 N CC 5 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 0.30 1.1
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 1.35 mm [0.053]
Full Stroke: 2.00 mm [0.078]
Max. Current: 0.5 A (continuous)
Average Resistance: max. 150 mΩ
Barrel Material: Bronze - Gold Plated
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
RCP021 VR03 2627
Installation Height• Fixed: 5.50 mm [0.217]
• Variable: not variable
Material: Brass
Plating: Hard Gold
6
Installation Height
Tool for MP300 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP7500 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP021 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR3035
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These extremely small size Micro Test Probes are a perfect choice for fine-pitch applications.
*Other Tip Styles available on request.
Other length and colors available on request.
w3: Wire Length
Wire length is given in inches.
Conversion Example: 27 in = approx. 700 mm
w2: Wire Colour
6 Blue
w1: Wire Diameter Code
AWG mm [inches]
2 32 0.20 0.008
≡ Pre Wired (VR) Socket / Receptacle Ordering Code Example
RCP021 VR03 2 6 27x y z w1 w2 w3
x: Series • y: Socket / Receptacle Plating • z: Option
• w1: Wire Diameter • w2: Colour • w3: Length
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 50 Mil / 1.27 mm Centers 50 Mil / 1.27 mm
ST5
10
Mul
ti-p
urpo
se P
robe
s ▪ 5
0 M
il /
1.27
mm
Mul
ti-p
urpo
se P
robe
s ▪ 5
0 M
il /
1.27
mm
AC
TU
AL
SIZ
E
59 60
ST510 Multi-purpose Test Probes
ST5
10
Tip Styles ST510
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
RA 5 4 - 0.50 0.020
TA 5 4 - 0.90 0.035
UB 0 3 - 0.50 0.020
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for small size Multi-purpose Test Probes ST510 is RCP034
See Page 60 for detailed information.
≡ Test Probes Ordering Code Example
ST510 N TA 5 4 MXa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
MX 0.70 2.5
NX 1.00 3.6
Plunger Material
Code Material
0 BeCu
5 Steel
Technical Specifications
Recommended Working Stroke: 2.20 mm [0.087]
Full Stroke: 2.80 mm [0.110]
Max. Current: 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
RCP034 SR06
Installation Height• Fixed: 6.70 mm [0.263]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height
RCP034 CR06
Tool for ST510 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP7500 TBP5035 TBP5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP034 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR5036
Extraction BitTBR5070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These small size Multi-purpose Test Probes are a perfect choice for ICT / FCT as well as for Special Purpose Machines with Automation and Robotic solutions. Perfect choice for high – demand applications. Telecom and Communication Industrie use this probe worldwide.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP034 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TU
AL
SIZ
E
Mul
ti-p
urpo
se P
robe
s ▪ 7
5 M
il /
1.91
mm
ST7
55
Series ST755 is a short and tiny Test Probe that is typically used in Mobile Communication Applications for Functional Test Jigs.
Technical Specifications
Recommended Working Stroke: 2.4 mm [0.094]
Full Stroke: 3 mm [0.118]
Max. Current: 3 - 4 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.57 2.1
M 1.08 3.9
X 1.80 6.5
ST755 Multi-purpose Test Probes
Centers 75 Mil / 1.91 mm
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST755 is RCP052.
See Page 62 for detailed information.
ST7
55
AC
TUA
L S
IZE
Mul
ti-p
urpo
se P
robe
s ▪ 7
5 M
il /
1.91
mm
≡ Tip Diameter Code changes according to the Tip Style.
Tip Styles ST755
Centers 75 Mil / 1.91 mm
Tip StylePlunger Material
Tip Diameter
Code
Diameter
mm [inches]
CG 0 5 1.50 0.059
TA 0 8 1.50 0.059
UB 0 4 0.72 0.028
6261
RCP052 SR09
Installation Height• Fixed: 8.40 mm [0.331]
• Variable: not variable
Material: Bronze / BeCu
Plating: Hard Gold
Plunger Material
Code Material
0 BeCu
≡ Test Probes Ordering Code Example
ST755 N CG 0 5 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
*Other Tip Styles available on request.
Installation Height
Tool for ST755 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP7500 - TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N SR09x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP052 Sockets / Receptacles Contains:Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP7500 TBR7535 TBR7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
RCP052 WR21
Installation Height• Fixed: 8.40 mm [0.331]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡63 64
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1011 Multi-purpose Test Probes Tip Styles ST1011S
T101
1
ST1
011
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CC 0 7 R 1.52 0.060
CG 0 7 - 1.91 0.075
ER 0 5 - 1.80 0.070
TA 0 9 - 1.91 0.075
UB 0 4 - 1.02 0.040
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1011 is RCP066.
See Page 64 for detailed information.
≡ Test Probes Ordering Code Example
ST1011 N CG 0 7 SXa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
SX 1.00 3.6
MX 1.50 5.4
XL 2.80 10.0
Plunger MaterialCode Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.70 mm [0.106]
Full Stroke: 4.10 mm [0.161]
Max. Current: 3 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
RCP066 SR12
Installation Height• Fixed: 12.10 mm [0.476]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
RCP066 WR32
Installation Height• Fixed: 12.10 mm [0.476]
• Variable: variable
• Feature: press - ring
Plating: Hard Gold
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Installation Height with different Sockets / Receptacles
Tool for ST1011 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N SR12x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡ 6665
AC
TU
AL
SIZ
E
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
ST1
020
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
0 BeCu
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1020 is RCP079.
See Page 73 - 74 for detailed information.
ST1020 Multi-purpose Test Probes
Centers 100 Mil / 2.54 mm
≡ Test Probes Ordering Code Example
ST1020 R CG 5 6 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
ST1
020
≡ Tip Diameter Code changes according to the Tip Style.
AC
TUA
L S
IZE
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CC 5 4 - 1.30 0.051
CG
5 5 R 1.80 0.071
5 6 - 2.00 0.079
5 8 N 2.50 0.098
TA0 3 - 1.40 0.055
0 5 - 2.00 0.079
Tip Styles ST1020
Centers 100 Mil / 2.54 mm
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1020 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications..
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height with different Sockets / Receptacles
For detailed Sockets / Receptacles for ST1020 See Page 73 - 74.
*Other Tip Styles available on request.
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡67
AC
TU
AL
SIZ
E
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
ST1
023
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1023 is RCP079.
See Page 73 - 74 for detailed information.
ST1023 Multi-purpose Test Probes
Centers 100 Mil / 2.54 mm
≡ Test Probes Ordering Code Example
ST1023 R CG 5 6 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
68
ST1
023
≡ Tip Diameter Code changes according to the Tip Style.
AC
TUA
L S
IZE
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 5 6 - 2.00 0.079
HK 5 5 R 1.75 0.079
Tip Styles ST1023
Centers 100 Mil / 2.54 mm
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1023 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Installation Height with different Sockets / Receptacles
For detailed Sockets / Receptacles for ST1023 See Page 73 - 74.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1028 Multi-purpose Test Probes Tip Styles ST1028S
T102
8
ST1
028
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
69 70
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
5 Steel
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1028 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST 1028 N TA 5 5 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
HK 5 4 N 1.75 0.069
TA 5 5 - 2.00 0.079
UB 5 5 - 1.00 0.039
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1028 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
For detailed Sockets / Receptacles for ST1028 See Page 73 - 74.
Installation Height with different Sockets / Receptacles
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1030 Multi-purpose Test Probes Tip Styles ST1030S
T103
0
ST1
030
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
71 72
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1030 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1030 N FA 5 5 Ua b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CA 5 5 - 2.00 0.079
CC 5 4 - 1.30 0.051
FA 5 5 - 1.00 0.039
TA 5 5 - 2.00 0.079
UB 5 5 N 1.00 0.039
Installation Height can be varied with the type of Socket / Receptacle that is used!
Installation Heights
Tool for ST1030 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications..
For detailed Sockets / Receptacles for ST1030 See Page 73 - 74.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
AC
TU
AL
SIZ
E
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡73 74
RCP079 SR06
Installation Height• Fixed: 15.30 mm [0.602]
• Variable: not variable
Plating: Hard Gold
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
RCP079 Sockets / Receptacles Sockets / Receptacles RCP079R
CP
079
RC
P07
9
Soc
kets
/ R
ecep
tacl
es ▪
100
Mil
/ 2.
54 m
m
Soc
kets
/ R
ecep
tacl
es ▪
100
Mil
/ 2.
54 m
m
RCP079 SR04
Installation Height• Fixed: 10.50 mm [0.413]
• Variable: not variable
Plating: Hard Gold
RCP079 SR09
Installation Height• Fixed: 16.20 mm [0.638]
• Variable: not variable
Plating: Hard Gold
RCP079 SR05
Installation Height• Fixed: 12.30 mm [0.484]
• Variable: not variable
Plating: Hard Gold
RCP079 WR10
Installation Height• Fixed: 16.20 mm [0.638]
• Variable: not variable
Plating: Hard Gold
RCP079 WR03
Installation Height• Fixed: 10.50 mm [0.413]
• Variable: not variable
Plating: Hard Gold
RCP079 WR11
Installation Height• Fixed: 16.20 mm [0.638]
• Variable: not variable
Plating: Hard Gold
Usage of Sockets / Receptacles
Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.
Technical Specifications
Average Resistance: ≤ 20 mΩ
Barrel Material: Brass / Beryllium Copper / Nickel Silver
Round & Square Post: Brass / Phosphor Bronze
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Design Code Description
WR Wire-Wrap Square Post
SR Solderable
SR Solderable
Type Information and Installation Height Data with inserted Test Probes ST1020*
RCP079 SR03
Installation Height• Fixed: 10.50 mm [0.413]
• Variable: not variable
Plating: Hard Gold
Tool for RCP079 Sockets / Receptacles Contains:Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10036 TBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
SR1003
SR1005 SR1006
SR1004
By placing these Spacing Rings under the Sockets / Receptacles collars, more customized Installation Heights can be reached on a very cost – effective way.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N SR04x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Compatible Series for RCP079:
ST1013
ST1014
ST1015
ST1016
ST1017
ST1018
ST1019
ST1020
ST1023
ST1028
ST1030
ST1034
ST1036
ST1055
High-current Series with RCP079 SR04 & WR03 only!
HC1000
HC1001
HC1002
HC1003
HC1004
HC1005
HC1007
HC1008
HC1033
AC
TUA
L S
IZE
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1013 Multi-purpose Test Probes Tip Styles ST1013S
T101
3
ST1
013
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
75 76
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1013 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1013 N CG 5 4 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CC5 3 - 1.30 0.051
5 4 - 1.80 0.071
CG
5 4 - 1.40 0.055
5 6 R 1.80 0.071
5 8 R 2.50 0.098
ER
5 3 - 1.30 0.051
5 4 - 1.40 0.055
5 6 - 1.80 0.071
FA 0 5 - 2.50 0.098
LA 5 3 N 1.30 0.051
TA
5 4 N 1.80 0.071
0 6 - 2.00 0.079
0 7 - 2.50 0.098
UB5 5 R 0.80 0.031
5 7 R 1.30 0.051
UH 5 5 - 0.80 0.031Plunger Material
Code Material
0 BeCu
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
N Nickel
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1013 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
For detailed Sockets / Receptacles for ST1013 See Page 73 - 74.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height with different Sockets / Receptacles
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1014 Multi-purpose Test Probes Tip Styles ST1014S
T101
4
ST1
014
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
77 78
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1014 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1014 R CG 0 7 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
Plunger Plating
Code Material
R Rhodium
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG0 7 R 2.00 0.079
0 8 R 2.50 0.098
Installation Height can be varied with the type of Socket / Receptacle that is used!
These robust designed double guided Test Probes are a perfect choice for ICT / FCT as well as for Special Purpose Machines with Automation and Robotic solutions. Perfect choice for high – demand applications.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height with different Sockets / Receptacles
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected] detailed Sockets / Receptacles for ST1014 See Page 73 - 74.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10036 TBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for ST1014 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
*Other Tip Styles available on request.
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡79 80
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1015 Multi-purpose Test Probes Tip Styles ST1015S
T101
5
ST1
015
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1015 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1015 R CG 0 8 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Plunger Material
Code Material
0 BeCu
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 0 8 R 2.50 0.098
TA 0 6 - 2.00 0.079
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1015 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
For detailed Sockets / Receptacles for ST1015 See Page 73 - 74.
Tool for RCP079 Sockets / Receptacles Contains Tool Handle + Exchangeable Bit(s)*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10036 TBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Height with different Sockets / Receptacles
≡ Tip Diameter Code changes according to the Tip Style.
*Other Tip Styles available on request.
Mul
ti-p
urpo
se P
robe
s ▪ 1
00 M
il /
2.54
mm
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡81 82
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1016 Multi-purpose Test Probes Tip Styles ST1016S
T101
6
ST1
016
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
AC
TU
AL
SIZ
E
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.00
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series forMulti-purpose Test Probes ST1016 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1016 R CG 5 6 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
R Rhodium
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter Code
Plunger Plating
Tip Diameter
mm [inches]
CG5 6 R 1.80 0.071
5 8 R 2.50 0.098
LA 5 3 N 1.30 0.051
UH 5 5 - 0.80 0.031
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1016 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for ST1016 See Page 73 - 74.
Installation Height with different Sockets / Receptacles
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10036 TBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
*Other Tip Styles available on request.
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡83 84
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1017 Multi-purpose Test Probes Tip Styles ST1017S
T101
7
ST1
017
AC
TU
AL
SIZ
E
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1017 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1017 R CG 0 8 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Plating
Code Material
R Rhodium
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 0 8 R 2.50 0.098
Plunger Material
Code Material
5 Steel
Installation Height varies of a type of Socket / Receptacle that is being used!
Tool for ST1017 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - BP12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10036 TBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
For detailed Sockets / Receptacles for ST1017 See Page 73 - 74.∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height with different Sockets / Receptacles
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.00
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡85 86
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1018 Multi-purpose Test Probes Tip Styles ST1018S
T101
8
ST1
018
AC
TU
AL
SIZ
E
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1018 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1018 N LA 5 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
R Rhodium
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG0 6 R 1.80 0.071
0 7 R 2.00 0.079
HK 5 4 N 1.75 0.069
LA 5 3 N 1.30 0.051
TA 0 4 - 1.80 0.071
Plunger Material
Code Material
0 BeCu
5 Steel
Installation Height varies of a type of Socket / Receptacle that is being used!
Tool for ST1018 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height with different Sockets / Receptacles
For detailed Sockets / Receptacles for ST1018 See Page 73 - 74.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.00
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡87 88
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1019 Multi-purpose Test Probes Tip Styles ST1019S
T101
9
ST1
019
AC
TU
AL
SIZ
E
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1019 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1019 R CG 0 7 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylePlunger Material
Tip Diameter Code
Plunger Plating
Tip Diameter
mm [inches]
CC 5 4 - 1.80 0.071
CG0 6 R 1.80 0.071
0 7 - 2.00 0.079
ER 5 8 - 2.50 0.098
TA 0 6 - 2.00 0.079
UB 5 7 - 1.30 0.051
Plunger Material
Code Material
0 BeCu
5 Steel
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1019 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed double guided Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
For detailed Sockets / Receptacles for ST1019 See Page 73 - 74.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Installation Height with different Sockets / Receptacles
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.00
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
89 90
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
Tip Styles ST1034ST1034 Multi-purpose Test Probes
ST1
034
ST1
034
Technical Specifications
Recommended Working Stroke: 6.40 mm [0.252]
Full Stroke: 8.00 mm [0.315]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1034 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1034 R CG 5 4 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for ST1034 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains:Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10036 TBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CA 5 3 - 1.30 0.051
CC5 4 - 1.30 0.051
5 6 - 2.00 0.079
CG5 4 R 1.50 0.059
0 6 R 2.00 0.079
ER 5 3 - 1.30 0.051
HK 5 3 - 1.80 0.071
LA 5 4 N 1.30 0.051
RA 5 4 - 1.50 0.059
SC 5 2 - 1.50 0.059
UB 5 4 R 1.30 0.051
UH 5 4 - 0.80 0.031
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for ST1034 See Page 73 - 74.
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height with different Sockets / Receptacles
Plunger Material
Code Material
0 BeCu
5 Steel
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡91 92
Installation Height can be varied with the type of Socket / Receptacle that is used!
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
ST1036 Multi-purpose Test Probes Tip Styles ST1036S
T103
6
ST1
036
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm[inch-
es]
CA 5 4 N 1.30 0.051
CG 5 3 R 1.30 0.051
TA
0 4 - 1.80 0.071
0 5 - 2.00 0.079
Technical Specifications
Recommended Working Stroke: 8.00 mm [0.315]
Full Stroke: 9.80 mm [0.386]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1036 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
ST1036 R TA 0 4 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
X 3.00 10.8
Plunger Material
Code Material
0 BeCu
5 Steel
≡ Tip Diameter Code changes according to the Tip Style.
Tool for ST1036 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N WR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 10
0 M
il /
2.54
mm
For detailed Sockets / Receptacles for ST1036 See Page 73 - 74.
Installation Height with different Sockets / Receptacles
AC
TU
AL
SIZ
E
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 125 Mil / 3.18 mm Centers 125 Mil / 3.18 mm
ST1250 Multi-purpose Test Probes Tip Styles ST1250S
T125
0
ST1
250
Mul
ti-p
urpo
se P
robe
s ▪ 1
25 M
il /
3.18
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
25 M
il /
3.18
mm
AC
TU
AL
SIZ
E
93 94
Technical Specifications
Recommended Working Stroke: 4.4 mm [0.173]
Full Stroke: 6.35 mm [0.250]
Max. Current: 5 - 8 A (continuous)
Average Resistance: ≤ 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1250 is RCP093.
See Page 94 for detailed information.
Tip StylePlunger Material
Tip Diameter
Code
Plunger Plating
Diameter
mm [inches]
CA 5 5 R 2.50 0.098
CG 5 5 - 2.50 0.098
FA 0 7 - 2.50 0.098
RA 0 11 - 2.50 0.098
TA 5 5 - 2.50 0.098
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
MX 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Plunger Material
Code Material
0 BeCu
5 Steel
≡ Test Probes Ordering Code Example
ST1250 R CA 5 5 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
≡ Tip Diameter Code changes according to the Tip Style.
RCP093 SR03
Installation Height• Fixed: 16 mm [0.630]
• Variable: variable
• Feature: press - ring
Material: BeCu / Nickel Silver
Plating: Hard Gold
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Installation Height
Tool for ST1250 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP093 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR12535
Extraction BitTBR12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Plunger Plating
Code Material
No lett er Hard Gold
R Rhodium
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP093 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
ST1608 Multi - purpose Test Probes Tip Styles ST1608S
T160
8
ST1
608
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
95 96
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1608 is RCP118.
See Page 99 for detailed information.
≡ Test Probes Ordering Code Example
ST1608 R CG 5 6 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height
Tool for ST1608 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP16000 TBP16035 TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Installation Height can be varied with the type of Socket / Receptacle that is used!
For detailed Sockets / Receptacles for ST1608 See Page 99.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tip Styles for ST1608 Plunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG
5 4 - 2.30 0.091
5 6 - 3.00 0.118
5 8 - 4.00 0.157
RA 5 6 - 1.80 0.071
RA 5 7 - 2.30 0.091
TA 5 4 N 2.50 0.098
By placing these Spacing Rings under the Sockets / Receptacles collars, more customized Installation Heights can be reached on a very cost – effective way.
Material: Brass - Gold Plated
SR1605 Spacer Ring
SR1606 Spacer Ring
SR1604 Spacer Ring
Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.
High-current version available. See Page 164.
AC
TU
AL
SIZ
E
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
97 98
Centers 160 Mil / 4.00 mm
ST1609 Multi-purpose Test Probes
ST1
609
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1609 is RCP118.
See Page 99 for detailed information.
≡ Test Probes Ordering Code Example
ST1609 R TA 5 4 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Plunger Plating
Code Material
No letter Hard Gold
N Nickel
R Rhodium
Centers 160 Mil / 4.00 mm
Tip Styles
ST1
609
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG
5 4 - 2.30 0.090
5 6 - 3.00 0.118
5 8 - 4.00 0.157
FA5 6 - 1.80 0.071
5 7 2.30 0.090
RA 5 7 - 2.30 0.090
TA5 4 N 2.50 0.098
5 6 4.00 0.157
TB 5 3 - 3.00 0.118
UB 5 3 R 1.80 0.071
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for ST1609 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP16000 TBP16035 TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height can be varied with the type of Socket / Receptacle that is used!
For detailed Sockets / Receptacles for ST1609 See Page 99.
SR1605 Spacer Ring
SR1606 Spacer Ring
SR1604 Spacer Ring
By placing these Spacing Rings under the Sockets / Receptacles collars, more customized Installation Heights can be reached on a very cost – effective way.
Material: Brass - Gold Plated
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
AC
TU
AL
SIZ
E
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡99 100
AC
TUA
L S
IZE
s
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
RCP118 Sockets / Receptacles Sockets / Receptacles RCP118
RC
P118
RC
P118
Soc
kets
/ R
ecep
tacl
es ▪
160
Mil
/ 4.
00 m
m
Soc
kets
/ R
ecep
tacl
es ▪
160
Mil
/ 4.
00 m
m
AC
TU
AL
SIZ
E
RCP118 SR06
Installation Height• Fixed: 13.50 mm [0.531]
• Variable: not variable
Plating: Hard Gold
RCP118 SR07
Installation Height• Fixed: 13.50 mm [0.531]
• Variable: not variable
Plating: Hard Gold
RCP118 WR05
Installation Height• Fixed: 13.50 mm [0.531]
• Variable: not variable
Plating: Hard Gold
Usually Test Probes are used in Sockets / Receptacles. This enables a quick and convenient exchange of worn-out Test Probes without having to disconnect the wire connections in a Test Fixture.
Technical Specifications
Average Resistance: ≤ 20 mΩ
Socket / Receptacle Material: Brass
Round & Square Post: Brass / Phosphor Bronze
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Type Information and Installation Height Data with inserted Test Probes ST1609*
Installation Height for Test Probe ST1608 Installation Height for Test Probe ST1609
Tool for RCP118 Sockets / Receptacles Contains:Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP16000 TBR16035 TBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
*For more Technical information about Installation Heights for other Series consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Design Code Description
WR Wire-Wrap Square Post
SR Solderable
SR Solderable
Compatible Series for RCP118:
ST1608
ST1609
HC1600
HC1601
HC1602
SWO1400 (SR06)
NRSW1400 (SR06)
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
ST1615 Multi-purpose Test Probes Tip Styles ST1615S
T161
5
ST1
615
AC
TU
AL
SIZ
E
101 102
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG8 3 2.30 0.091
5 5 4.00 0.157
FA 8 5 6.50 0.256
Technical Specifications
Recommended Working Stroke: 4.80 mm [0.189]
Full Stroke: 6.00 mm [0.236]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1615 is RCP138.
See Page 102 for detailed information.
≡ Test Probes Ordering Code Example
ST1615 N CG 8 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
8 Brass
RCP138 SR03
Installation Height• Fixed: 12.55 mm [0.494]
• Variable: not variable
Plating: Hard Gold
Material: Brass / Phosphor Bronze
RCP138 SR04
Installation Height• Fixed: 12.55 mm [0.494]
• Variable: not variable
Plating: Hard Gold
Material Brass / Phosphor Bronze
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
X 3.00 10.8
≡ Tip Diameter Code changes according to the Tip Style.
SR1607 Spacer Ring
SR1608 Spacer Ring
SR1609 Spacer Ring
Installation Height
Tool for ST1615 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP138 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBR16001
Customized Pressing BitTBR16036
Extraction BitTBR16071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
*Other Tip Styles available on request.
*CG Tip Height is 4 mm and FA Tip Height is 3 mm.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP138 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
By placing these Spacing Rings under the Sockets / Receptacles collars, more customized Installation Heights can be reached on a very cost – effective way.
Material: Brass - Gold Plated
Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
ST1616 Multi-purpose Test Probes Tip Styles ST1616S
T161
6
ST1
616
AC
TU
AL
SIZ
E
103 104
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 0 6 R 4.00 0.157
RA 5 3 R 1.80 0.071
Plunger Plating
Code Material
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1616 is RCP138.
See Page 102 for detailed information.
≡ Test Probes Ordering Code Example
ST1616 R CG 0 6 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
X 3.00 10.8
U 5.00 18.0
Plunger Material
Code Material
0 BeCu
5 Steel
Technical Specifications
Recommended Working Stroke: 5.60 mm [0.220]
Full Stroke: 7.00 mm [0.276]
Max. Current: 12 - 15 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
ST1616R RA53 M
Installation Height
Tool for ST1616 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP16000 TBP16035 TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP138 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16036
Extraction BitTBR16071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes, with a continuous/through plunger, are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. The through-hole Plunger enables this Probe to push a Switch Probe that is mounted underneath.
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
Mul
ti-pu
rpos
e Pr
obes
▪ 16
0 M
il /
4.00
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP138 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
*Other Tip Styles available on request.
For detailed Sockets / Receptacles for ST1616 see Page 102.
Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 180 Mil / 4.57 mm Centers 180 Mil / 4.57 mm
ST1800 Multi-purpose Test Probes Tip Styles ST1800S
T180
0
ST1
800
Mul
ti-p
urpo
se P
robe
s ▪ 1
80 M
il /
4.57
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
80 M
il /
4.57
mm
AC
TU
AL
SIZ
E
105 106
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 5 4 - 3.96 0.156
TA 5 5 - 3.96 0.156
UB 5 3 R 1.52 0.060
Plunger Plating
Code Material
No letter Hard Gold
R Rhodium
Recommended Socket / Receptacle Series for Multi-purpose Test Probes ST1800 is RCP106.
See Page 106 for detailed information.
≡ Test Probes Ordering Code Example
ST1800 N CG 5 4 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.50 9.0
X 3.00 10.8
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 4.40mm [0.173]
Full Stroke: 6.35 mm [0.250]
Max. Current: 6 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆ ≡ Tip Diameter Code changes according to the Tip Style.
RCP106 SR03
Installation Height• Fixed: 16.50 mm [0.650]
• Variable: variable
• Feature: press - ring
Material: Nickel Silver
Plating: Hard Gold
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Installation Height
Tool for ST1800 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP20000 TBP18735 TBP18770
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP106 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP20000
Customized Pressing BitTBR18735
Extraction BitTBR18770
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP106 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡107 108
AC
TUA
L S
IZE
Centers 177 Mil / 4.50 mm Centers 177 Mil / 4.50mm
ST1870 Multi-purpose Test Probes Tip Styles ST1870S
T187
0
ST1
870
Mul
ti-p
urpo
se P
robe
s ▪ 1
77 M
il /
4.50
mm
Mul
ti-p
urpo
se P
robe
s ▪ 1
77 M
il /
4.50
mm
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 0 4 R 3.96 0.156
RA 0 3 - 2.03 0.080
TA 0 3 R 2.36 0.093
UB 0 3 R 2.03 0.080
Plunger Plating
Code Material
R RhodiumRecommended Socket / Receptacle Series for
Multi-purpose Test Probes ST1870 is RCP139. See Page 108 for detailed information.
≡ Test Probes Ordering Code Example
ST1870 R CG 0 4 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 2.25 8.1
X 4.75 17.1
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.40mm [0.173]
Full Stroke: 6.35 mm [0.250]
Max. Current: 6 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
RCP139 SR03
Installation Height• Fixed: 16.50 mm [0.650]
• Variable: variable
• Feature: press - ring
Material: Bronze / Nickel Silver
Plating: Hard Gold
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Installation Height
Tool for ST1870 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP20000 TBP18736 TBP18771
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP139 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP20000
Customized Pressing BitTBR18736
Extraction BitTBR16701
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These robust-designed Test Probes are an ideal choice for ICT/FCT as well as for Special Purpose Machines with Automation and Robotic solutions. They are a good choice for demanding applications.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP139 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
*Other Tip Styles available on request.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡109 110
Centers 100 Mil / 2.54 mm
IT1000 Interface Probes
IT10
00In
terf
ace
Pro
bes ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles IT1000
IT10
00
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
1ER 0 3 1.02 0.040
Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.
IT1000 Interface Probes are used in 170-TP "Pylon Type" Signal Blocks and as replacement Probes in the following Teradyne/GenRad ICT Test Systems:
2270; 2271; 2272; 2282 (all models); 2283; 2284; 2286; 2287 manufactured before 07/1995.
Furthermore they are also used in Rohde & Schwarz ICT and 3030 SPEA ICT Test Systems & SPEA Towers.
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Interface Probes IT1000 is RCP066.
See Page 110 for detailed information.
≡ Test Probes Ordering Code Example
IT1000 N 1ER 0 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.10 3.96
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.60 mm [0.102]
Full Stroke: 3.2 mm [0.126]
Max. Current: 4 - 5 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for IT1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR46x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
VF1 Vacuum ICT Fixture Kit with "Pylon Type" Interface Frame
RCV-ST-170 pole Signal Receiver (Test System) Side
RCV-ST-170 pole Signal ITA Interchangeable Test Adapter
(Test Fixture) Side
RCP066 WR46
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡111 112
Centers 100 Mil / 2.54 mm
BIT1000 Banana Interface Probes
BIT
1000
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm
Tip Styles BIT1000
BIT
1000
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
1ER 0 3 1.02 0.040
Banana Interface Probes are used when the Sockets / Receptacles loose their securing force after the Interface Probes have been exchanged a number of times. In this case, the Banana-style Probes allow continued usage of the Receptacles and avoids expensive maintenance work (extraction and re-wiring) when replacing them.
The BIT 1000 Banana Interface Probe is the replacement probe for the following Teradyne/GenRad ICT Test Systems:
2270; 2271; 2272; 228x ICA (all models); 2283; 2284; 2286; 2287 manufactured before 07/1995.
Plunger Plating
Code Material
No letter Hard Gold Recommended Socket / Receptacle Series for Banana Interface Probes BIT1000 is RCP066.
See Page 112 for detailed information.
≡ Test Probes Ordering Code Example
BIT1000 N 1ER 0 3 SXa b c d e f g
aa: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
SX 1.20 4.3
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.60 mm [0.102]
Full Stroke: 3.2 mm [0.126]
Max. Current: 4 - 5 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for BIT1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
Ban
ana
Inte
rfac
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Ban
ana
Inte
rfac
e Pr
obes
▪ 10
0 M
il /
2.54
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR46x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
RCP066 WR46
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
113 114
Centers 100 Mil / 2.54 mm
IT1001 Interface Probes
IT10
01A
CT
UA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles IT1001
IT10
01
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
UB 0 3 1.02 0.040
Plunger Plating
Code Material
No letter Hard GoldRecommended Socket / Receptacle Series for
Interface Probes IT1001 is RCP066. See Page 114 for detailed information.
≡ Test Probes Ordering Code Example
IT1001 N UB 0 3 SXa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
SX 1.20 4.3
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.1 mm [0.082]
Full Stroke: 3.2 mm [0.126]
Max. Current: 4 - 5 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for IT1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.
IT1001 Interface Probes are used in 170-TP "Pylon Type" Signal Blocks and as replacement Probes in the following Teradyne/GenRad ICT Test Systems:
2280; 2281; 2281a; 2287a; 228x ICA (all models); 2283; 2284; 2286; 2287 manufactured after 07/1995.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR46x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
RCP066 WR46
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡115 116
Centers 100 Mil / 2.54 mm
BIT1001 Banana Interface Probes
BIT
1001
A
CT
UA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles BIT1001
BIT
1001
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
ER 0 3 1.00 0.039
UB 0 3 1.02 0.040
Banana Interface Probes are used when the Sockets/Receptacles loose their securing force after the Interface Probes have been exchanged a number of times. In this case, the Banana-style Probes allow continued usage of the Receptacles and avoids expensive maintenance work (extraction and re-wiring) when replacing them.
The BIT 1001 Banana Interface Probe is the replacement probe for the following Teradyne/GenRad ICT Test Systems:
2280; 2281; 2281a; 2287a; 228x ICA (all models); 2283; 2284; 2286; 2287 manufactured before 07/1995
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Banana Interface Probes BIT1001 is RCP066.
See Page 116 for detailed information.
≡ Test Probes Ordering Code Example
BIT1001 N UB 0 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.00 3.6
SX 1.20 4.3
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.1 mm [0.082]
Full Stroke: 3.2 mm [0.126]
Max. Current: 4 - 5 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for BIT1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR46x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Ban
ana
Inte
rfac
e Pr
obes
▪ 10
0 M
il /
2.54
mm
Ban
ana
Inte
rfac
e Pr
obes
▪ 10
0 M
il /
2.54
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
RCP066 WR46
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡117 118117 118
Centers 100 Mil / 2.54 mm
IT1002 Interface Probes
IT10
02
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm
Tip Styles IT1002
IT10
02
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
ER 0 3 1.57 0.061
Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.
IT1002 Interface Probes are used as replacement Probes in the following Teradyne/GenRad ICT Test Systems:
All model Numbers ending with "L" (High Density Capability).
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Interface Probes IT1002 is RCP066.
See Page 118 for detailed information.
≡ Test Probes Ordering Code Example
IT1002 N ER 0 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 3.60 mm [0.142]
Full Stroke: 4.30 mm [0.169]
Max. Current: 4 - 5 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for IT1002 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR46x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
RCP066 WR46
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡119 120119 120119 120
Centers 100 Mil / 2.54 mm
IT1003 Interface Probes
IT10
03
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles IT1003
IT10
03
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
ER 0 3 1.50 0.059
Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.
• IT1003 Interface Probes are used as replacement Probes in the following Teradyne/GenRad ICT Test Systems: 1800; 7878; 8852; 8855.
• They are used as Interface Signal Probe for TR5001 and TR8001 Test System for Test Research Inc. (TRI) Machines.
Note: Other ICT Test Systems may use this same type of Probe too.
Plunger Plating
Code Material
No letter Hard GoldRecommended Socket / Receptacle Series for
Interface Probes IT1003 is RCP066.See Page 120 for detailed information.
≡ Test Probes Ordering Code Example
IT1003 N ER 0 3 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.57 2.1
S 1.00 3.6
M 1.56 5.6
N 2.00 7.2
LX 3.06 11.0
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 6.35 mm [0.250]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for IT1003 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR13x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
RCP066 WR13
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡121 122
Centers 100 Mil / 2.54 mm
IT1004 Interface Probes - Mint Pin
IT10
04 -
Min
t P
inA
CT
UA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles IT1004
IT10
04 -
Min
t P
in Tip Styles
Plunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CI 0 3 3.10 0.122
Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.
IT1004 Interface Probes are used as replacement Probes for Keysight/Agilent 3070 ICT Test Systems.
Note: IT1004 is the so-called "Mint Pin".
Plunger Plating
Code Material
No letter Hard GoldRecommended Socket / Receptacle Series for
Interface Probes IT1004 is RCP066. See Page 122 for detailed information.
≡ Test Probes Ordering Code Example
IT1004 N CI 0 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.00 3.6
M 1.56 5.6
N 2.00 7.2
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 6.35 mm [0.250]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for IT1004 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR13x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
RCP066 WR13
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡123 124
Centers 100 Mil / 2.54 mm
IT1007 Interface Probes
IT10
07
AC
TU
AL
SIZ
E
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles IT1007
IT10
07
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
HK0 3 N 1.30 0.051
0 4 N 1.90 0.075
Interface Probes provide the electro-mechanical contact between the Test System and the Test Fixture.
IT1007 Interface Probes are used as is replacement probe for Digitaltest MTS 300 ICT Test System series.
Plunger Plating
Code Material
N Nickel
Recommended Socket / Receptacle Series for Interface Probes IT1007 is RCP066.
See Page 124 for detailed information.
≡ Test Probes Ordering Code Example
IT1007 N HK 5 4 NXa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
NX 2.20 7.9
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.70 mm [0.106]
Full Stroke: 4.00 mm [0.157]
Max. Current: 5 A (continuous)
Average Resistance: max. 55 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 20 °C up to + 80 °C [- 4 °F up to + 176 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for IT1007 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR13x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
Inte
rfac
e P
robe
s ▪ 1
00 M
il /
2.54
mm
RCP066 WR13
Plating: Hard Gold
Material: Bronze / Nickel Silver
RCP066 CR12
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡125 126
Centers 125 Mil / 3.17mm
IT1250 Interface Probes
IT12
50A
CT
UA
L S
IZE
AC
TUA
L S
IZE
Centers 125 Mil / 3.17mm
Tip Styles IT1250
IT12
50
Interface Signal Probe for TR5001 and TR8001 Test System for Test Research Inc. (TRI) Machines.
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Interface Probes IT1250 is RCP093.
See Page 126 for detailed information.
≡ Test Probes Ordering Code Example
IT1250 N CG 0 5 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
L 2.00 7.2
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.30 mm [0.169]
Full Stroke: 6.40 mm [0.252]
Max. Current: 17 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Tool for IT1250 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP12571
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 5 2.50 0.098
Inte
rfac
e P
robe
s ▪ 1
25 M
il /
3.17
mm
Inte
rfac
e P
robe
s ▪ 1
25 M
il /
3.17
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP093 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR12535
Extraction BitTBR12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP093 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
RCP093 SR03
Material: Brass
Plating: Hard Gold
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡127 128
Centers 100 Mil / 2.54 mm
FC1000 Fixture Customizing Probes - Test Jet
FC10
00
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm
Fixture Customizing Probes - Test Jet FC1000
FC10
00
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
RS 0 3 1.40 0.055
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Interface Probes FC1000 is RCP066.See Page 128 for detailed information.
≡ Test Probes Ordering Code Example
FC1000 N RS 0 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.30 4.7
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 6.35 mm [0.250]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for FC1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR46x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Test
Jet
Pro
bes ▪ 1
00 M
il /
2.54
mm
Test
Jet
Pro
bes ▪ 1
00 M
il /
2.54
mm
This type of Fixture-customizing Probe is made to connect Test Jet / OpenXpress / Q-Mux etc. Amplifier Boards, that are used in various Test Systems.
VTEP MUX Card PackageOrder Code: VTMUX - 1
Sensor PlateOrder Code: VTSP - 1*
TestJet Probe PackageOrder Code: VTHP - 1
*Different sizes available
RCP066 WR46
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡129 130
Centers 100 Mil / 2.54 mm
FC1001 Fixture Customizing Probes - Polarity Check
FC10
01
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm
Fixture Customizing Probes - Polarity Check FC1001
FC10
01
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
NB 0 3 1.57 0.062
This type of Fixture-customizing Probe is made to connect Polarity Check Amplifier Boards used in various Test Systems. This Test Probe is soldered directly to the edge of the PCB. It is called VTEP, FrameScan etc. by different ICT Test System Manufacturers.
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Interface Probes FC1001 is RCP066.See Page 130 for detailed information.
≡ Test Probes Ordering Code Example
FC1001 N NB 0 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
N 2.00 7.2
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 6.35 mm [0.250]
Max. Current: 5 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 40 °C up to + 120 °C [- 40 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for FC1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR13x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Pol
arit
y C
heck
Pro
bes ▪ 1
00 M
il /
2.54
mm
Pol
arit
y C
heck
Pro
bes ▪ 1
00 M
il /
2.54
mm
VTEP Polarity Check Vertical Amplifier Package
Order Code: VTPCVP - 1
Sensor Plate for Polarity CheckOrder Code: VTPCSP - 1
*Different sizes available
RCP066 WR13
Plating: Hard Gold
Material: Bronze / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡131 132
Centers 100 Mil / 2.54 mm
FC1010 ESD Grounding Probe
FC10
10 -
ES
D G
roun
ding
AC
TU
AL
SIZ
E
Centers 100 Mil / 2.54 mm
Tip Styles FC1010
FC10
10 -
ES
D G
roun
dingTip Styles
Plunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 5 1.50 0.059
ER 0 5 1.50 0.059
This Fixture-customizing Probe has an extra-long travel. As a Grounding Probe it offers an excellent solution for Fixture Manufacturers and End-customers, that have ESD problems related to constant grounding needs.
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Interface Probes FCFC1010 is RCP066.See Page 132 for detailed information.
≡ Test Probes Ordering Code Example
FC1010 N CG 0 5 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 12.00 mm [0.472]
Full Stroke: 15.00 mm [0.591]
Max. Current: 3 - 8 A (continuous)
Average Resistance: max. 20 mΩ
Barrel Material: Beryllium Copper / Nickel Silver
Spring Material: Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Tool for FC1010 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP10000 - TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
AC
TUA
L S
IZE
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N WR50x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Long
- Tr
avel
Pro
bes ▪ 1
00 M
il /
2.54
mm
Long
- Tr
avel
Pro
bes ▪ 1
00 M
il /
2.54
mm
Installation Height
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
*Other Tip Styles available on request.
RCP066 WR50
Plating: Hard Gold
Material: Brass / Nickel Silver
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡133 134
AC
TUA
L S
IZE
Fixture Customizingtestjet Parts for Keysight / Agilent 3070 fixtures
Ope
ns T
esti
ng P
rodu
cts
Ope
ns T
esti
ng P
rodu
cts
Test
Jet
Par
ts
Test
Jet
Par
ts
AC
TU
AL
SIZ
E
Part Number: TJMUX - 1
TestJet MUX Card package for up to 64 sensors
Consists of:• 1 MUX card• Connectors• Ribbon Cable
Part Number: TJMUX - 2
TestJet MUX Card + Reference Card package for up to 64 sensors
Consists of:
• 1 MUX + Ref card• Connectors• Ribbon Cable
Part Number: TJP - 1
TestJet Probe Package
Consists of: • 1 Amplifier Board• 2 TestJet Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46
Part Number: TJSP - 1
TestJet Sensor Plate
Size: 12.00 x 9.50 x 1.30 mm[0.475" x 0.375" x 0.05"]
Part Number: TJSP - 2
TestJet Sensor Plate
Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]
Part Number: TJSP - 3
TestJet Sensor Plate
Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]
Part Number: TJSP - 4
Sensor Plate
Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]
Part Number: TJSP - 5
Sensor Plate
Size: 159.00 x 12.70 x 1.30 mm [0.50" x 6.25" x 0.05"] thick
Part Number: PCVP - 1
Polarity Check Vertical Amplifier Package
Consists of:• 1 Amplifier Board• 2 Polarity Check Probes: FC 1001 NB03 N• 2 Sockets / Receptacles: RCP066 WR13
Part Number: PCSP - 1
Sensor Plate for Polarity Check
Size: 6.30 x 3.70 mm[0.248" x 0.147"]
Part Number: PCSP - 2
Sensor Plate for Polarity Check
Size: 7.60 x 4.90 mm[0.298" x 0.191"]
Fixture CustomizingTestJet Parts for
Keysight / Agilent 3070 fixtures
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
AC
TU
AL
SIZ
E
135 136
VTEP Parts for Keysight / Agilent 3070 fixtures
VTEP Parts for Keysight / Agilent 3070 fixtures
Part Number: VTMUX - 1
VTEP MUX Card Package
Consists of:• 1 MUX card• Connectors• Ribbon Cable
Part Number: VTMUX - 2
VTEP MUX Card + Reference Card Package
Consists of:• 1 MUX + Ref card• Connectors• Ribbon Cable
Part Number: VTHP - 1
VTEP Horizontal Amplifier Package
Consists of: • 1 Amplifier Board• 2 TestJet Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46
Part Number: VTSP - 1
VTEP Sensor Plate Size: 31.80 x 31.80 x 1.30 mm
[1.25" x 1.25" x 0.05"]
Part Number: VTSP - 2
Sensor Plate
Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]
Part Number: VTPCVP - 1
VTEP Polarity Check Vertical Amplifier Package
Consists of:• 1 Amplifier Board• 2 Polarity Check Probes: FC 1001 NB03 N• 2 Sockets / Receptacles: RCP066 WR13
Part Number: VTPCSP - 1
Sensor Plate for VTEP Polarity Check
Size: 6.30 x 3.70 mm[0.248" x 0.147"]
Part Number: VTPCSP - 2
Sensor Plate for VTEP Polarity Check
Size: 7.60 x 4.90 mm[0.298" x 0.191"]
Ope
ns T
esti
ng P
rodu
cts
Ope
ns T
esti
ng P
rodu
cts
VTEP
Par
ts
VTEP
Par
ts
Fixture Customizing Fixture Customizing
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
AC
TU
AL
SIZ
E
137 138
Fixture Customizing Open Xpress for Genrad FrameScan Plus for Teradyne Fixture Customizing
Part Number: OEOFM
OFM Card
Consists of:• 1 OFM card• Connectors• Ribbon Cable
Part Number: OEOXP - 1
OX Sensor Connection Board Package
Consists of:• 1 sensor connection board• 2 Probes FC 1000 NB03• 2 Sockets / Receptacles: RCP066 WR46
Part Number: OESP - 1
Sensor PlateSize: 12.00 x 9.50 x 1.30 mm
[0.475" x 0.375" x 0.05"]
Part Number: OESP - 2
Sensor Plate
Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]
Part Number: OESP - 3
Sensor Plate
Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]
Part Number: OESP - 4
Sensor Plate
Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]
Part Number: OESP - 5
Sensor Plate
Size: 159.00 x 12.70 x 1.30 mm [0.50" x 6.25" x 0.05"] thick
Part Number: FSPMUX - 1
FrameScan Plus MUX CardConsists of:• 1 FrameScan FX 2.0 Selector Board (MUX Card)• Connectors• Ribbon Cable
Part Number: FSPAP - 1
FrameScan Amplifier PackageConsists of:• 1 Amplifier Board• 2 Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46
Part Number: FSPSP - 1
Size: 12.00 x 9.50 x 1.30 mm[0.475" x 0.375" x 0.05"]
Part Number: FSPSP - 2
Sensor Plate
Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]
Part Number: FSPSP - 3
Sensor Plate
Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]
Part Number: FSPSP - 4
Sensor Plate
Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]
Part Number: FSPSP - 5
Sensor Plate
Size: 159.00 x 12.70 x 1.30 mm [0.50" x 6.25" x 0.05"] thick
Ope
ns T
esti
ng P
rodu
cts
Ope
ns T
esti
ng P
rodu
cts
Ope
n X
pres
s
Fram
eSca
n P
lus
Par
ts
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
139 140
Fixture Customizing FrameScan Plus for Teradyne FrameScan FX for Teradyne Fixture Customizing
Part Number: CSVP - 1
CapScan Vertical Amplifier Package
Consists of:• 1 Amplifier Board• 2 Probes: FC 1001 NB03 N• 2 Sockets / Receptacles: RCP066 WR13
Part Number: CSSP -1
CapScan Sensor Plate
Size: 6.30 x 3.70 mm[0.248" x 0.147"]
Part Number: CSSP - 2
CapScan Sensor Plate
Size: 7.60 x 4.90 mm[0.298" x 0.191"]
Part Number: FSPMUX - 2
FX/FrameScan Plus MUX Card
Consists of:• 1 FrameScan FX 2.0 Selector Board• Connectors• Ribbon Cable
Part Number: FSPAP - 1FX FrameScan Amplifier PackageConsists of:• 1 Amplifier Board• 2 Probes: FC1000 RS03 S• 2 Sockets / Receptacles: RCP066 WR46
Part Number: FSPSP - 1
Sensor PlateSize: 12.00 x 9.50 x 1.30 mm
[0.475" x 0.375" x 0.05"]
Part Number: FSPSP - 2
Sensor Plate
Size: 14.60 x 10.80 x 1.30 mm[0.575" x 0.425" x 0.05"]
Part Number: FSPSP - 3
Sensor Plate
Size: 31.80 x 31.80 x 1.30 mm[1.25" x 1.25" x 0.05"]
Part Number: FSPSP - 4
Sensor Plate
Size: 65.00 x 65.00 x 1.30 mm [2.56" x 2.56" x 0.05"]
Part Number: FSPSP - 5
Sensor Plate
Size: 159.00 x 12.70 x 1.30 mm [0.50" x 6.25" x 0.05"] thick
AC
TU
AL
SIZ
EO
pens
Tes
ting
Pro
duct
s
Ope
ns T
esti
ng P
rodu
cts
Fram
eSca
n P
lus
Fram
eSca
n FX
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡141
Centers ≥ 100 Mil / 2.54 mm
IC Series Interface Contacts
IC S
erie
sIn
terf
ace
Con
tact
s ▪ ≥
100
Mil
/ 2.
54 m
mA
CT
UA
L S
IZE ≡ Contact Terminals Ordering Code Example
IC085 N WR 0 5a
a: Series
WR = Wire -Wrapped SR = Solderable
≡ Contact Terminals Ordering Code Example
IC085 N WR 0 7a
a: Series
WR = Wire -Wrapped SR = Solderable
Technical Specifications
Material: Brass - Hard Gold or Rhodium Plated
Average Resistance: max. 5 mΩ
Interface Contacts are used to ensure reliable connection between ITA and Receiver Parts of the Test Systems. Typical applications are "Pylon Type" Interface connections, Mint Pins or other Interface Probe counterparts in an ITA - Test Fixture side.
IC071 WR16 ; IC 071 WR03 ; IC071 WR09 for Pylon-Block-Type Mass-Interconnect Applications.
142
AC
TUA
L S
IZE
Centers ≥ 100 Mil / 2.54 mm
Interface Contacts IC Series
IC S
erie
sIn
terf
ace
Con
tact
s ▪ ≥
100
Mil
/ 2.
54 m
m
IC071 WR16
Installation Height: 0.80 mm [0.031]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC118 SR03
Installation Height: 1.00 mm [0.039]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC085 WR07
Installation Height: 2.00 mm [0.079]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC085 WR08
Installation Height: 2.00 mm [0.079]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC085 QE03
Installation Height: 2.00 mm [0.079]
Current: 15 Amps
Material: Brass
Plating: Hard Gold
IC085 WR05
Installation Height: 3.00 mm [0.118]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC085 SR04
Installation Height: 3.00 mm [0.118]
Current: 20 Amps
Material: Brass
Plating: Hard Gold
IC085 SR03
Installation Height: 3.00 mm [0.118]
Current: 20 Amps
Material: Brass
Plating: Hard Gold
IC085 SR05
Installation Height: 2.00 mm [0.079]
Current: 15 Amps
Material: Brass
Plating: Hard Gold
IC085 SR06
Installation Height: 2.00 mm [0.079]
Current: 20 Amps
Material: Brass
Plating: Hard Gold
IC071 WR03
Installation Height: 0.80 mm [0.031]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC071 WR09
Installation Height: 0.80 mm [0.031]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡143
IC & RF Series Interface Contacts
IC &
RF
Ser
ies
Inte
rfac
e C
onta
cts
AC
TU
AL
SIZ
E
≡ Contact Terminals Ordering Code Example ≡ RF Contact Terminals Ordering Code Example
IC085 WR 0 5a
IC197 MCX03a
a: Series
WR = Wire -Wrapped SR = Solderable
a: Series
IC157R SR03
Installation Height: 3.00 mm [0.118]
Current: 30 Amps
Material: Brass
Plating: Rhodium
IC085 WR03
Installation Height: 12 mm [0.472]
Current: 10 Amps
Material: Brass
Plating: Hard Gold
IC138 SR03
Installation Height: 3.00 mm [0.118]
Current: 30 Amps
Material: Brass
Plating: Hard Gold
IC169 - M303
Installation Height: 3.00 mm [0.118]
Current: 50 Amps
Material: Brass
Plating: Hard Gold
IC197 MCX03
Installation Height: 3.90 mm [0.154]
Material: Brass
Plating: Hard Gold
IC236 MCX03
Installation Height: 6.10 mm [0.240]
Material: Brass
Plating: Hard Gold
MA
RK
ING
UN
IT
Marking Unit Fixture Customizing
Mar
king
Uni
t
RF Interface Contacts
Marking Unit MU S001 D2 M12x1
The Marking Units made by Equip-Test offer exceptional durability and universal usage for ICT, FCT, EOL and any other types of Test Fixtures. Easy placement assembly and flexibility in regard to height adjustment makes this product attractive and popular in all application areas.
Because the outer thread covers the entire length, this makes adjustment very easy. The Marking bit itself is easily exchangeable, and this ensures a high product life-expectancy and high ROI numbers.
The design allows permanent marking of not only PC-Boards but also all types of materials such as G10/FR4, CEM-1, Plastics, Acrylic and Aluminium.
Fields of Applications:
• PCB test ICT and FT
• Test Adaptors
Customer Benefits:
• Compact design
• Easy integration in existing systems
• Optimal positioning
• Height-adjustability
• Exchangeable Marking Unit
• Spring-loaded Marking Pin
• Wide range of applications
Replacing the Marking Pin
The replacement kit (which consists of a spring, pin and lock) can be exchanged in the event of wear (Order No. RK - MU S001). To dismantle the Pin is remove with a pair of pliers. Assemble the new parts in the replacement kit according to the sketch. For this purpose we also supply an insertion tool (order no. TRK - MU S001), which presses the lock into the gearshaft drill hole.
Mechanical Data
Full Travel 2.00 mm
Working Travel 1.50 mm
Pre-Loaded Spring Force 0.55 N
Spring Force at Working Travel 3.10 N
Marked Area � 2.0 mm
Recommended Marking Impulse ca. 1 s
Electrical Data
Max. Current Rating 3.0 A
Typical Continuity Resistance ≤ 30 mOhm
Rated Voltage 12 V
Output 0.75 W
No-Load Current 3.7 mA
Starting Current 106 mA
Max. Permanent Load Current 81 mA
Terminal Resistance 114 Ohm
Pin no-load Speed 180 min-1
Max. Pin Torque 54 mNm
Materials
Needle Material Solid Carbide
External Thread M12x1 with wrench size SW11
144
MCX = with connection for MCX
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡145 146
PIC Pneumatic Interface Contacts
PIC
Pne
umat
ic In
terf
ace
Con
tact
sA
CT
UA
L S
IZE ≡ Pneumatic Contact Terminals Ordering Code Example
PIC 3150a
a: Series
PIC3150 for ITAMaterial: BrassPlating: Hard GoldPressure / Vacuum Rated: 232 psi (16 Bar)Note: Without valve
PIC3230 for ITAMaterial: DelrinPressure / Vacuum Rated: 100 psi (6.9 Bar)Note: Without valve
PIC3231 for ReceiverMaterial: DelrinPressure / Vacuum Rated: 100 psi (6.9 Bar)Note: With valve
PIC3151 for ReceiverMaterial: BrassPlating: Hard GoldPressure / Vacuum Rated: 232 psi (16 Bar)
Note: Without valve
VPC Signal & Pneumatic Interface Modules
Reconfigurable Integrated Interface Connector Modules
Receiver 510 160 101
Receiver 610 138 216
ITA 610 110 108
Receiver 610 110 101ITA 510 161 101
24 pos Mini Coax / Power(up to 65 A)
Mini Power ContactREC 610 116 112ITA 610 115 124
Micro Power ContactREC 610 142 101ITA 610 143 101
Mini Pneumatic ContactREC 610 131 108ITA 610 132 106
Without valve
Mini Coax Contact REC 610 104 114
ITA 610 103 115
40 pos Micro Coax / Power(up to 21 A)
100 / 8 pos Signal Mini
Power / Coax
24 / 30 pos Signal Micro Power / Coax
ITA 610 138 109
Receiver 510 160 108
ITA 510 161 108
QuadraPaddle iCon Signal Modules
TriPaddle iCon Signal Modules
Power, Coaxial and Hybrid iCon Connectors Sample Contacts:
Sample Contacts:Operating current 5 A ▪ up to 160 pins
Operating current 7 - 10 A ▪ up to 96 pins
VPC
MO
DU
LES
VPC
Mod
ules
Sig
nal,
Pow
er, C
oax
& P
neum
atic
Mod
ules
∆ For more Technical information and Customized Solutions consult us at: [email protected]
These high-quality modular Interface Connector Modules (so-called iCons) offer an exceptional signal quality when connecting/contacting Test Fixtures (ITA) with Functional or ICT Test Systems (Receiver). Because there is no spring force applied then a minimum of 10,000 cycles is guaranteed. Note: Allows mixing of I/O and Hybrid Modules.
Technical Summary:• Low I / O • Hybrid applications• 10.000 connection / disconnection• Contacts:• Power, Pneumatic, Coax and Signal Contacts
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡147 148
Interface Blocks
Signal Interface Blocks
Inte
rfac
e B
lock
sInterface Blocks
High-current Signal & Pneumatic Interface Blocks
Inte
rfac
e B
lock
s
Sig
nal I
nter
face
Blo
cks
Hig
h-cu
rren
t &
Pne
umat
ic In
terf
ace
Blo
cks
40 Pole Signal Receiver Pylon Block
85 Pole Signal Receiver Pylon Block
8 Pole High-current Receiver Pylon Block
136 Pole Signal Receiver Pylon Block
24 Pole High-current Receiver Pylon Block
40 Pole Low Resistance Signal Receiver Pylon Block
4 Pole High-current Receiver Pylon Block
170 Pole Signal Low Resistance Receiver Pylon Block
8 Pole Pneumatic Receiver Pylon Block
8 Pole Pneumatic Receiver Pylon Block
170 Pole Signal Receiver Pylon Block
45 Pole High-current Receiver Pylon Block
85 Pole Signal ITA Pylon Block
8 Pole High-current ITA Pylon Block
136 Pole Signal ITA Pylon Block
24 Pole High-current ITA Pylon Block
40 Pole Signal ITA Pylon Block
Mixed ITA Pylon Block
Mixed Receiver Pylon Block
4 Pole High-current ITA Pylon Block
8 Pole Penumatic ITA Pylon Block
Pole Penumatic ITA Pylon Block
170 Pole Signal ITA Pylon Block
45 Pole High-current ITA Pylon Block
≡ Interface Blocks Ordering Code Example
RCV ST 170 Signal Receiver Pylon Blocka b c d
a: Series b: Current c: Number of Poles d: Type No.
ST = Signal HC = High-current PN = Pneumatic LR = Low-Resistance RF = Radio-Frequency OP = Optical
≡ Interface Blocks Ordering Code Example
ITA ST 170 KT06 Signal ITA Pylon Blocka b c d
a: Series b: Current c: Number of Poles d: Type No.
ST = Signal HC = High-current PN = Pneumatic LR = Low-Resistance RF = Radio-Frequency OP = Optical
Order Code: RCV-HC-8Test Probe: HCT2000 HK03 N
Socket / Receptacle: RCT157 SR03
Order Code: RCV-HC-45Test Probe: HCT1600 HK03 M
Socket / Receptacle: RCT118 SR03
Order Code: RCV-HC-4Test Probe: HCT2000 HK03 N
Socket / Receptacle: RCT157 SR03
Order Code: RCV-ST-40Test Probe: IT1000 1ER03 S
Socket / Receptacle: RCP066 WR46
Order Code: RCV-ST-85Test Probe: IT1000 1ER03 S
Socket / Receptacle: RCP066 WR46
Order Code:RCV-ST-170Test Probe: IT1000 1ER03 S
Socket / Receptacle: RCP066 WR46
Order Code: RCV-ST-LR-40Test Probe: HC1000 HK04 S
Socket / Receptacle: RCP 079 WR03
Order Code: RCV-ST-136Test Probe: IT1000 1ER03 S
Socket / Receptacle: RCP066 WR46
Order Code: RCV-ST-LR-170Test Probe: HC1000 HK04 S
Socket / Receptacle: RCP 079 WR03
Order Code: RCV-HC-24Test Probe: HCT1600 HK03 M
Socket / Receptacle: RCT118 SR03
Order Code: RCV-PN-FES-8Pneumatic Contact - Receiver:
PIC3151
Order Code: RCV-PN-VPC-8Pneumatic Contact - Receiver:
PIC3231
Order Code: ITA-HC-45Contact: IC085 SR07
Order Code: ITA-HC-4Contact: IC169 M303
Order Code: ITA-HC-8Contact: IC169 M303
Order Code: ITA-ST-85-KT06Contact: IC071 WR09
Order Code: ITA-ST-170-KT06Contact: IC071 WR09
Order Code: ITA-ST-40-KT06Contact: IC071 WR09
Order Code: ITA-MB-ST/HC/PN-32/8/4 Signal Contact: IC071 WR09
High-Current Contact: IC138 SR03 Pneumatic Contact: PIC3150
Order Code: RCV-MB-ST/HC/PN-32/8/4 Signal Contact: IT1000 1ER03 S
Socket / Receptacle: RCP066 WR6High-Current Contact: HCT1600 HK03 LX
Socket / Receptacle: RCT118 SR03Pneumatic Contact: PIC3151
Order Code: ITA-ST-136-KT06Contact: IC071 WR09
Order Code: ITA-HC-24Contact: IC085 SR07
Order Code: ITA-PN-FES-8Pneumatic Contact - ITA:
PIC3150
Order Code: ITA-PN-VPC-8Pneumatic Contact - ITA:
PIC3230
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
HC1000 High-current Probes up to 16 A Tip Styles HC1000H
C10
00
HC
1000
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
149 150
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CC 5 3 - 1.30 0.051
CG
0 4 - 1.60 0.063
0 5 - 1.80 0.071
0 6 - 2.00 0.079
0 7 - 2.50 0.098
HK 5 5 - 2.00 0.079
RA
0 5 - 1.00 0.039
0 6 S 2.00 0.079
TA 0 3 - 2.00 0.079
Plunger Plating
Code Material
No letter Hard Gold
S Silver
Recommended Socket / Receptacle Series for High-current Probes HC1000 is RCP079.See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
HC1000 S CG 0 6 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Plunger Material
Code Material
0 BeCu
5 Steel
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 16 A (continuous)
Average Resistance: max. 10 mΩ
Barrel Material: Brass - Gold Plated / Brass - Silver Plated
Spring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Installation Height can be varied with the type of Socket / Receptacle that is used!
Tool for HC1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N SR04x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
For detailed Sockets / Receptacles for HC1000 See Page 73 - 74.
Installation Height with different Sockets / Receptacles
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
RCP079 SR04
Installation Height• Fixed: 10.50 mm [0.413]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
151 152
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
HC1001 High-current Probes up to 16 A High-current Probe up to 16 A HC1002H
C10
01
HC
1002
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CC 5 3 1.30 0.051
CG0 6 2.00 0.079
0 7 2.50 0.098
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG0 6 2.00 0.079
0 7 2.50 0.098
HK 0 4 1.75 0.069
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for High-current Probes HC1001 is RCP079.See Page 73 - 74 for detailed information.
Recommended Socket / Receptacle Series for High-current Probes HC1002 is RCP079.
See Page 73 - 74 for detailed information.
≡ Test Probes Ordering Code Example
HC1001 N CG 0 6 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Plunger Material
Code Material
0 BeCu
These High-current Probes are designed to withstand High-currents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1002 N CC 5 3 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
≡ Tip Diameter Code changes according to the Tip Style.
Installation Heights
Installation Heights
Tool for HC1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for HC1002 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡153 154
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
HC1003 High-current Probes up to 16 A High-current Probes up to 16 A HC1004H
C10
03
HC
1004
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 6 2.00 0.079
HK 0 5 2.00 0.079
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG
0 5 1.80 0.071
0 6 2.00 0.079
0 7 2.50 0.098
HK0 4 1.75 0.069
0 5 2.00 0.079
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1003 N HK 0 5 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1004 N HK 0 5 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold PlatedOperating Temperature: - 100 °C up to + 200 °C
[- 148 °F up to + 392 °F]
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
≡ Tip Diameter Code changes according to the Tip Style.
≡ Tip Diameter Code changes according to the Tip Style.
Installation HeightsInstallation Heights
Tool for HC1003 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Tool for HC1004 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Recommended Socket / Receptacle Series for High-current Probes HC1003 is RCP079. See Page 73 - 74 for detailed information.
Recommended Socket / Receptacle Series for High-current Probes HC1004 is RCP079. See Page 73 - 74 for detailed information.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡155 156
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
HC1005 High-current Probes up to 16 A High-current Probes up to 16 A HC1007H
C10
05
HC
1007
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
TA 0 3 2.00 0.079
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CC 5 3 1.30 0.051
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1005 N CC 5 3 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.25 8.1
X 3.00 10.8
Plunger Material
Code Material
0 BeCu
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 16 A (continuous)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1007 N TA 0 3 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 16 A (continuous)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Material
Code Material
5 Steel
≡ Tip Diameter Code changes according to the Tip Style.≡ Tip Diameter Code changes according to the Tip Style.
Installation HeightsInstallation Heights
Tool for HC1005 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Tool for HC1007 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Recommended Socket / Receptacle Series for High-current Probes HC1005 is RCP079. See Page 73 - 74 for detailed information.
Recommended Socket / Receptacle Series for High-current Probes HC1007 is RCP079. See Page 73 - 74 for detailed information.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.25 8.1
X 3.00 10.8
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
157 158
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
HC1008 High-current Probes up to 16 A High-current Probes up to 16 A HC1033H
C10
08
HC
1033
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 6 2.00 0.079
TB 0 3 2.00 0.079
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG0 5 1.80 0.071
0 7 2.50 0.098
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1008 N CG 0 6 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]M 1.50 5.4
L 2.25 8.1
X 3.00 10.8
Plunger Material
Code Material
0 BeCu
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated / Brass - Silver PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
≡ Tip Diameter Code changes according to the Tip Style.≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1033 N CG 0 5 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
X 3.00 10.8
These High-current Probes are designed to withstand High-cur-rents up to 16 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because other-wise their different design is not noticeable externally).
Applicable for:
• Functional Testing • Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]Full Stroke: 5.30 mm [0.209]Max. Current: 16 A (continuous)Average Resistance: max. 10 mΩBarrel Material: Brass - Gold PlatedSpring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Material
Code Material
0 BeCu
Installation HeightsInstallation Heights
Recommended Socket / Receptacle Series for High-current Probes HC1008 is RCP079. See Page 73 - 74 for detailed information.
Recommended Socket / Receptacle Series for High-current Probes HC1033 is RCP079. See Page 73 - 74 for detailed information.
Tool for HC1008 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
Universal Pressing BitTBP10000
Insertion & Extraction Bit
TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Hig
h-cu
rren
t P
robe
s ▪ 1
00 M
il /
2.54
mm
Tool for HC1033 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡159 160
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
HC1600 High-current Probes up to 24 A Tip Styles HC1600H
C16
00
HC
1600
Hig
h-cu
rren
t P
robe
s ▪ 1
60 M
il /
4.00
mm
Hig
h-cu
rren
t P
robe
▪ 16
0 M
il /
4.00
mm
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG
0 3 2.30 0.091
0 4 3.00 0.118
0 5 4.00 0.157
RA 0 5 2.30 0.091
TA 0 3 3.00 0.118
Plunger Plating
Code Material
No letter Hard Gold
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
L 2.20 7.9
X 3.00 10.8
U 5.00 18.0
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 24 A (continuous)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated
Spring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
These High-current Probes are designed to withstand High-currents up to 24 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing• Burn-in Testing• Power Supply Testing
Tool for HC1600 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Height with different Sockets / Receptacles
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
For detailed Sockets / Receptacles for HC1600 See Page 99.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N WR05x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Recommended Socket / Receptacle Series for High-current Probes HC1600 is RCP118.
See Page 99 for detailed information.
≡ Test Probes Ordering Code Example
HC1600 N CG 0 4 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
RCP118 WR05
Installation Height• Fixed: 10.50 mm [0.413]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡161 162
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
HC1601 High-current Probes up to 24 A High-current Probes up to 24 A HC1602H
C16
01
HC
1602
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 4 3.00 0.118
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG0 4 3.00 0.118
0 5 4.00 0.728
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for High-current Probes HC1601 is RCP118.
See Page 99 for detailed information.
Recommended Socket / Receptacle Series for High-current Probes HC1602 is RCP118.
See Page 99 for detailed information.
≡ Test Probes Ordering Code Example
HC1601 N CG 0 4 Xa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
X 3.00 10.8
U 5.00 18.0
Plunger Material
Code Material
0 BeCu
These High-current Probes are designed to withstand High-currents up to 24 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing• Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 24 A (continuous)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated
Spring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC1602 N CG 0 4 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
X 3.00 10.8
These High-current Probes are designed to withstand High-currents up to 24 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing• Burn-in Testing• Power Supply Testing
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Max. Current: 24 A (continuous)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated
Spring Material: SUS / Spring Steel Gold Plated
Operating Temperature: - 30 °C up to + 120 °C [- 22 °F up to + 248 °F]
Plunger Material
Code Material
0 BeCu
Installation HeightInstallation Height
Tool for HC1601 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Insertion & Extraction Bit
TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
Universal Pressing BitTBP16000
Insertion & Extraction Bit
TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Hig
h-cu
rren
t P
robe
s ▪ 1
60 M
il /
4.00
mm
Hig
h-cu
rren
t P
robe
▪ 16
0 M
il /
4.00
mm
Tool for HC1602 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Not available standard insertion / extraction tool for this tip size in default grid. Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡163 164
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
HC1608 High-current Probes up to 24 A Tip Styles HC1608H
C16
08
HC
1608
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG0 3 2.30 0.091
0 4 3.50 0.138
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for High-current Probes HC1608 is RCP118.
See Page 99 for detailed information.
≡ Test Probes Ordering Code Example
HC1608 N CG 0 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 2.80 mm [0.110]
Full Stroke: 3.50 mm [0.138]
Max. Current: 24 A (continuous)
Average Resistance: max. 20 mΩBarrel Material: Brass - Gold Plated
Spring Material: SUS
Operating Temperature: - 40 °C up to + 250 °C [- 40 °F up to + 482 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
These High-current Probes are designed to withstand High-currents up to 24 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing• Burn-in Testing• Power Supply Testing
RCP118 SR03
Installation Height• Fixed: 7.40 mm [0.291]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height
Tool for HC1608 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
SR1604 Spacer Ring SR1605 Spacer Ring
SR1606 Spacer Ring
By placing these Spacing Rings under the Sockets / Receptacles collars, more customized Installation Heights can be reached on a very cost – effective way.
Hig
h-cu
rren
t P
robe
s ▪ 1
60 M
il /
4.00
mm
Hig
h-cu
rren
t P
robe
▪ 16
0 M
il /
4.00
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡165 166
AC
TUA
L S
IZE
Centers 200 Mil / 5.08 mm Centers 200 Mil / 5.08 mm
HC2000 High-current Probes up to 50 A Tip Styles HC2000H
C20
00
HC
2000
Hig
h-cu
rren
t P
robe
s ▪ 2
00 M
il /
5.08
mm
Hig
h-cu
rren
t P
robe
s ▪ 2
00 M
il /
5.08
mm
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG 0 4 - 4.00 0.157
FA 0 3 - 4.00 0.157
HK 0 3 - 3.00 0.118
RE 0 3 S 4.00 0.157
TA 0 3 - 4.00 0.157
Plunger Plating
Code Material
No letter Hard Gold
S Silver
≡ Test Probes Ordering Code Example
HC2000 S CG 0 4 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
L 3.00 10.8
X 5.00 18.0
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.40 mm [0.173]
Full Stroke: 5.50 mm [0.217]
Max. Current: 50 A (for short loads up to 80 A)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated
Spring Material: SUS
Operating Temperature: - 40 °C up to + 250 °C [- 40 °F up to + 482 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
These High-current Probes are designed to withstand High-currents up to 50 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing• Burn-in Testing• Power Supply Testing
RCP157 SR03
Installation Height• Fixed: 10.75 mm [0.423]
• Variable: not variable
Material: Brass
Plating: Hard Gold
≡ Socket / Receptacle Ordering Code Example
RCP157 N SR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height
Tool for HC2000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP20000 - TBP20070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP157 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP20000
Customized Pressing BitTBR20035
Extraction BitTBR20070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
RCP157 M3
Installation Height• Fixed: 10.80 mm [0.425]
• Variable: not variable
Material: Brass
Plating: Hard GoldRecommended Socket / Receptacle Series for
High-current Probes HC2000 is RCP157. See Page 166 for detailed information.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Hig
h-cu
rren
t P
robe
s ▪ 2
00 M
il /
5.08
mm
Installation Height
167 168
AC
TUA
L S
IZE
Centers 200 Mil / 5.08 mm Centers 200 Mil / 5.08 mm
HC2001 High-current Probes up to 50 A Tip Styles HC2001H
C20
01
HC
2001
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 4 4.00 0.157
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
HC2001 N CG 0 4 La b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
L 3.00 10.8
X 5.00 18.0
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 7.40 mm [0.291]
Full Stroke: 8.50 mm [0.335]
Max. Current: 50 A (for short loads up to 80 A)
Average Resistance: max. 10 mΩBarrel Material: Brass - Gold Plated
Spring Material: SUS
Operating Temperature: - 40 °C up to + 250 °C [- 40 °F up to + 482 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
These High-current Probes are designed to withstand High-currents up to 50 Amps AC/DC. High pointing accuracy and long-life expectancy are basic features for this Probe series. All Tip-styles have an engraved "O" ring at the bottom part of the tip, to allow easy recognition. (Note: This is necessary because otherwise their different design is not noticeable externally).
Applicable for:
• Functional Testing• Burn-in Testing• Power Supply Testing
Recommended Socket / Receptacle Series for High-current Probes HC2001 is RCP157. See Page 168 for detailed information.
≡ Socket / Receptacle Ordering Code Example
RCP157 N SR03x y z
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Tool for HC2001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP20000 - TBP20070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP157 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP20000
Customized Pressing BitTBR20035
Extraction BitTBR20070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Hig
h-cu
rren
t P
robe
s ▪ 2
00 M
il /
5.08
mm
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
RCP157 SR03
Installation Height• Fixed: 13.75 mm [0.541]
• Variable: not variable
Material: Brass
Plating: Hard Gold
RCP157 M3
Installation Height• Fixed: 13.80 mm [0.543]
• Variable: not variable
Material: Brass
Plating: Hard Gold
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
C
169 170
AC
TUA
L S
IZE
Centers 75 Mil / 1.91 mm 2.6 mm [0.102] Switching Path
SW750 Switch Probes Tip Styles SW750S
W75
0
SW
750
Sw
itch
Pro
bes ▪ 7
5 M
il /
1.91
mm
Sw
itch
Pro
bes ▪ 7
5 M
il /
1.91
mm
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 0 3 0.80 0.031
FA 0 3 0.80 0.031
Recommended Socket / Receptacle Series for Switch Probes SW750 is RCP052.
See Page 170 for detailed information.
≡ Test Probes Ordering Code Example
SW750 N CG 0 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
S 1.50 5.4
Plunger Material
Code Material
0 BeCu
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Switching path: 2.60 mm [0.102] ± 0.2 [0.008]
Max. Current: 1 A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Switch Probes are actually micro-switches, and have different switching paths. The repeatable switching path ensures the quality of our Switch Probes.
Typical applications for this type of product are:
• Test fixture closed-cover and/or UUT (Unit Under Test) sensing
• Automatic start of test when DUT is placed on to the fixture • Placed under Probes with through-hole continuous Plunger
for “circuit closed”• Component and Connector Pin Presence Check
RCP052 NR09
Installation Height• Fixed: 9.30 mm [0.366]
• Variable: not variable
Material: Bronze
Plating: Hard Gold
RCP0
52 N
R09
Installation Height
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Tool for SW750 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP7500 - TBP7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP052 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP7500
Customized Pressing BitTBR7535
Extraction BitTBR7570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Plunger Plating
Code Material
No letter Hard Gold
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP052 N NR09x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
ON OFF
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡171 172
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm 4.00 mm [0.157] Switching Path
SW1000 Switch Probes Tip Styles SW1000S
W10
00
SW
1000
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 5 3 1.00 0.039
RA 5 3 0.65 0.025
≡ Test Probes Ordering Code Example
SW1000 N CG 5 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
S 2.00 7.2
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 5.00 mm [0.197]
Full Stroke: 6.00 mm [0.236]
Switching path: 4.00 mm [0.157] ± 0.2 [0.008]
Max. Current: 1 A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Switch Probes are actually micro-switches, and have different switching paths. The repeatable switching path ensures the quality of our Switch Probes.
Typical applications for this type of product are:
• Test fixture closed-cover and/or UUT (Unit Under Test) sensing
• Automatic start of test when DUT is placed on to the fixture • Placed under Probes with through-hole continuous Plunger
for “circuit closed”• Component and Connector Pin Presence Check
RCP066 CR05
Installation Height• Fixed: 16.40 mm [0.645]
• Variable: variable
• Feature: press - ring
Material: Bronze / Nickel Silver
Plating: Hard Gold
RCP0
66 C
R05
Installation Height
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Tool for SW1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP066 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Plunger Plating
Code Material
No letter Hard Gold
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Recommended Socket / Receptacle Series for Switch Probes SW1000 is RCP066.
See Page 172 for detailed information.
*Other Tip Styles available on request.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N CR05x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Sw
itch
Pro
bes ▪ 1
00 M
il /
2.54
mm
Sw
itch
Pro
bes ▪ 1
00 M
il /
2.54
mm
ON OFF
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡173 174
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm 2.6 mm [0.102] Switching Path
SW1001 Switch Probes Tip Styles SW1001S
W10
01
SW
1001
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
IW 9 3 1.50 0.059
CG 5 3 1.30 0.051
FA 5 3 0.80 0.031
TA 5 3 1.50 0.059
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
SW1001 N CG 5 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
M 1.50 5.4
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Switching path: 2.60 mm [0.102] ± 0.2 [0.008]
Max. Current: 3 A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
RCP079 NR04
Installation Height• Fixed: 9.50 mm [0.374]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Tool for SW1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Handle TH1
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Plunger Material
Code Material
5 Steel
9 Plastic
Switch Probes are actually micro-switches, and have different switching paths. The repeatable switching path ensures the quality of our Switch Probes.
Typical applications for this type of product are:
• Test fixture closed-cover and/or UUT (Unit Under Test) sensing
• Automatic start of test when DUT is placed on to the fixture • Placed under Probes with through-hole continuous Plunger
for “circuit closed”• Component and Connector Pin Presence Check
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Sw
itch
Pro
bes ▪ 1
00 M
il /
2.54
mm
Sw
itch
Pro
bes ▪ 1
00 M
il /
2.54
mm
Recommended Socket / Receptacle Series for Switch Probes SW1001 is RCP079.
See Page 174 for detailed information.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N NR04x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
For detailed Sockets / Receptacles for SW1001 see Page 177.
Installation Height with different Sockets / Receptacles
ON OFF
RCP079 SR03
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
175 176
Centers 100 Mil / 2.54 mm 4.00 mm [0.157] Switching Path
SW1002 Switch Probes Tip Styles SW1002S
W10
02
SW
1002
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
IW 9 3 1.50 0.059
CG 5 3 1.30 0.051
FA 5 3 0.80 0.031
TA 5 3 1.50 0.059
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
SW1002 N CG 5 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
M 1.00 3.6
Plunger Material
Code Material
5 Steel
9 Plastic
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.30 mm [0.209]
Switching path: 4.00 mm [0.157] ± 0.2 [0.008]
Max. Current: 3A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
≡ Tip Diameter Code changes according to the Tip Style.
Installation Height is determined by drill hole depth of Socket / Receptacle that is used!
Tool for SW1002 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10035 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Switch Probes are actually micro-switches, and have different switching paths. The repeatable switching path ensures the quality of our Switch Probes.
Typical applications for this type of product are:
• Test fixture closed-cover and/or UUT (Unit Under Test) sensing
• Automatic start of test when DUT is placed on to the fixture • Placed under Probes with through-hole continuous Plunger
for “circuit closed”• Component and Connector Pin Presence Check
Sw
itch
Pro
bes ▪ 1
00 M
il /
2.54
mm
Sw
itch
Pro
bes ▪ 1
00 M
il /
2.54
mm
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP079 N NR04x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
For detailed Sockets / Receptacles for SW1002 see Page 179.
Installation Height with different Sockets / Receptacles
Recommended Socket / Receptacle Series for Switch Probes SW1002 is RCP079.
See Page 176 for detailed information.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
ON OFF
RCP079 NR04
Installation Height• Fixed: 9.50 mm [0.374]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Universal Pressing BitTBP10000
Customized Pressing BitTBR10036
Extraction BitTBR10071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP079 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
RCP079 SR03
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡177 178
AC
TUA
L S
IZE
Centers 140 Mil / 3.50 mm 1.70 mm [0.067] Switching Path
SW1400 Switch Probes Tip Styles SW1400S
W14
00
SW
1400
Sw
itch
Pro
bes ▪ 1
40 M
il /
3.50
mm
Sw
itch
Pro
bes ▪ 1
40 M
il /
3.50
mm
AC
TU
AL
SIZ
E
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 5 5 2.30 0.090
FA 5 3 1.80 0.071
IW9 4 3.00 0.118
9 6 5.00 0.197
Plunger Plating
Code Material
No letter Hard Gold
Recommended Socket / Receptacle Series for Switch Probes SW1400 is RCP118.
See Page 178 for detailed information.
≡ Test Probes Ordering Code Example
SW1400 N CG 5 5 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
XS 2.30 8.3
Plunger Material
Code Material
5 Steel
9 Plastic
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.20 mm [0.205]
Switching path: 1.70 mm [0.067] ± 0.20 [0.008]
Max. Current: 5 A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Installation Height
Quick wire change solution.
≡ Tip Diameter Code changes according to the Tip Style.
RCP118 SR06
Installation Height• Fixed: 10.20 mm [0.401]
• Variable: not variable
Material: Brass
Plating: Hard Gold
*Note: The Receptacle can be used from Grid 4.50 mm (177 Mil) up.
Tool for SW1400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP16000 TBP16035 TBP14070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
PLG1019
Material: Brass
Switch Probes are actually micro-switches, and have different switching paths. The repeatable switching path ensures the quality of our Switch Probes.
Typical applications for this type of product are:
• Test fixture closed-cover and/or UUT (Unit Under Test) sensing
• Automatic start of test when DUT is placed on to the fixture • Placed under Probes with through-hole continuous Plunger
for “circuit closed”• Component and Connector Pin Presence Check
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
ON OFF
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡179 180
AC
TUA
L S
IZE
Centers 140 Mil / 3.50 mm 1.70 mm [0.067] Switching Path
SWO1400 Switch Probes Openers Tip Styles SWO1400S
WO
1400
SW
O14
00
Sw
itch
Pro
bes ▪ 1
40 M
il /
3.50
mm
Sw
itch
Pro
bes ▪ 1
40 M
il /
3.50
mm
AC
TU
AL
SIZ
E
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
SWO1400 N 3CK 5 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
N 2.30 8.3
Plunger Material
Code Material
5 Steel
9 Plastic
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Switching path: 1.70 mm [0.067] ± 0.20 [0.008]
Max. Current: 1 A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Connector Pin Diameter: 0.50 mm [0.020]
Connector Pin Length: 6.00 mm [0.236]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Installation Height
Tool for SWO1400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP14070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Switch Probe Openers are actually micro-switches, with normally closed circuits. The repeatable switching path ensures the quality of our Switch Probes Openers.
Typical applications for this type of product are:
• Test fixture closed-cover and/or UUT (Unit Under Test) sensing
• Automatic start of test when DUT is placed on to the fixture
• Placed under Probes with through-hole continuous Plunger for “circuit closed”
• Component and Connector Pin Presence Check
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Recommended Socket / Receptacle Series for Switch Probes SWO1400 is RCP118.
See Page 180 for detailed information.
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG 5 3 2.30 0.090
3CK 5 3 1.00 0.039
IW
9 3 3.00 0.118
9 4 4.00 0.157
9 5 5.00 0.197
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
ONOFF
RCP118 SR06
Installation Height• Fixed: 15.70 mm [0.618]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Quick wire change solution.
PLG1019
Material: Brass
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡181 182
AC
TUA
L S
IZE
Centers 140 Mil / 3.50 mm 1.70 mm [0.067] Switching Path
NRSW1400 Non-Rotating Switch Probes Tip Styles NRSW1400N
RS
W14
00
NR
SW
1400
AC
TU
AL
SIZ
E
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
NRSW1400 N WC 5 3 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
XS 2.30 8.3
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 4.00 mm [0.157]
Full Stroke: 5.00 mm [0.197]
Switching path: 1.70 mm [0.067] ± 0.20 [0.008]
Max. Current: 1 A (continuous)
Average Resistance: ≤ 50 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper / Nickel Silver
Spring Material: SUS / Spring Steel Gold Plated
Connector Pin Diameter: 0.50 mm 0.020]
Connector Pin Length: 6.00 mm [0.236]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
RCP1
18 S
R06
Installation Height
Tool for NRSW1400 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP16000 TBP16035 TBP14070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Non-Rotating Switch Probes are actually micro-switches, with different switching paths and non-rotating plunger tips. The repeatable quality of our Switch Probes ensures our customers satisfaction. They are secured against tip rotation in order to allow reliable entrance into a flat-hole connector housing.
Typical application:
• Component Presence Check of angled flat-connector housing
Non
-Rot
atin
g S
wit
ch P
robe
s ▪ 1
40 M
il /
3.50
mm
Non
-Rot
atin
g S
wit
ch P
robe
s ▪ 1
40 M
il /
3.50
mm
Recommended Socket / Receptacle Series for Non-Rotating Switch NRSW1400 is RCP118.
See Page 182 for detailed information.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR06x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
WC 5 3 1.90 X 1.00 0.075 X 0.039
WD 5 3 4.00 X 0.65 0.118 X 0.026
≡ Tip Diameter Code changes according to the Tip Style.
ON OFF
Quick wire change solution.
RCP118 SR06
Installation Height• Fixed: 10.20 mm [0.402]
• Variable: not variable
Material: Brass
Plating: Hard Gold
PLG1019
Material: Brass
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡183 184
AC
TUA
L S
IZE
Centers 300 mil / 7.50 mm 0.50 mm [0.020] Switching Path
SWTB2560 Ball-Head Switch Probes Tip Styles SWTB2560S
WTB
2560
SW
TB25
60
Sw
itch
Pro
bes ▪ 3
00 m
il /
7.50
mm
Sw
itch
Pro
bes ▪ 3
00 m
il /
7.50
mm
AC
TU
AL
SIZ
E
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
SWTB2560 N QB 5 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Switching Point
Code Rated force
(N) [oz]
S 0.70 2.5
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 0.80 mm [0.031]
Full Stroke: 1.00 mm [0.039]
Switching path: 0.50 mm [0.020] ± 0.20 [0.008]
Max. Current: 1 A (continuous)
Average Resistance: ≤ 25 mΩ
Barrel Material: Brass - Gold Plated
Spring Material: SUS / Spring Steel Gold Plated
Connector Pin Diameter: 0.50 mm [0.020]
Connector Pin Length: 6.00 mm [0.236]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Installation TipDUT
Test Module Fixture
Test Probe
Ball-headed Switch Probes series SWTB2560 are actually micro-switches and are ideal for side-connection. The threaded design allows precise height and switching point adjustment. The repeatable switching path ensures the quality of our Switch Probes.
Typical applications for this type of product are:
• Moving DUT detection
• Side connection to DUT
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Recommended Socket / Receptacle Series for Switch Probes SWTB2560 is RCT256.
See Page 184 for detailed information.
≡ Tip Diameter Code changes according to the Tip Style.
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
QB 5 3 4 0.157
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCT256 N OR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
RCT256 OR03
Installation Height• Variable: variable
Material: Brass
Plating: Hard Gold
ON
OFFTool for SWTB2560 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion & Extraction Bit
TH1 TBT30070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCT256 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP30000
Customized Pressing BitTBR30035
Extraction BitTBR30070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Centers 100 Mil / 2.54 mm
PN1000 Pneumatic Test Probes
PN
1000
Pn
eum
atic
Tes
t Pr
obes
▪ 10
0 M
il /
2.54
mm
AC
TU
AL
SIZ
E
185
≡ Test Probes Ordering Code Example
PN1000 R CG 5 4 LSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
LS 0.60 2.2
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 6.00 mm [0.236]
Maximum Stroke: 10.00 mm [0.394]
Contact Force at Work.Stroke: 0.6 N (2.2 oz)
Operating Medium: Compressed Air (filtered, oil-free)
Operating Pressure: 6 bar (86 psi)
Max. Current: 1 - 2 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles PN1000
PN
1000
Pn
eum
atic
Tes
t Pr
obes
▪ 10
0 M
il /
2.54
mm
186
RCP094 PN03
Installation Height• Fixed: 5.90 mm [0.232 ]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height & Max. Stroke
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
4CA 5 3 R 1.30 0.051
CG 5 4 R 2.50 0.098
1LA 5 3 R 1.00 0.039
3UB 5 3 R 1.50 0.059
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
R Rhodium
*Note: The Sockets / Receptacles RCP094 and PA1040 can be used from
Grid 3.00 mm (120 Mil) up.
Tool for PN1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP10000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP094 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10037
Extraction BitTBR12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP094 N PN03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Recommended Socket / Receptacle Series for Pneumatic Test Probes PN1000 is RCP094.
See Page 186 for detailed information.
PA1040Material: Brass - Gold Plated
Quick wire change solution.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Centers 100 Mil / 2.54 mm
PN1001 Pneumatic Test Probes
PN
1001
A
CT
UA
L S
IZE
187
≡ Test Probes Ordering Code Example
PN1001 R 1LA 5 3 LSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 6.00 mm [0.236]
Maximum Stroke: 10.00 mm [0.394]
Contact Force at Work.Stroke: 0.6 N (2.2 oz)
Operating Medium: Compressed Air (filtered, oil-free)
Operating Pressure: 6 bar (86 psi)
Max. Current: 1 - 2 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles PN1001
PN
1001
188
RCP094 PN03
Installation Height• Fixed: 5.90 mm [0.232]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
4CA 5 3 R 1.30 0.051
CG 5 4 R 2.50 0.098
1LA 5 3 R 1.00 0.039
3UB 5 3 R 1.50 0.059
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
R Rhodium
Quick wire change solution.
*Note: The Sockets / Receptacles RCP094 and PA1040 can be used from Grid
3.00 mm (120 Mil) up.
Tool for PN1001 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP10000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP094 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10037
Extraction BitTBR12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
LS 0.60 2.2
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Recommended Socket / Receptacle Series for Pneumatic Test Probes PN1001 is RCP094.
See Page 188 for detailed information.
Pneu
mat
ic T
est
Prob
es ▪
100
Mil
/ 2.
54 m
m
Pneu
mat
ic T
est
Prob
es ▪
100
Mil
/ 2.
54 m
m
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP094 N PN03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height & Max. Stroke
PA1040Material: Brass - Gold Plated
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Centers 100 Mil / 2.54 mm
PN1002 Pneumatic Test Probes
PN
1002
A
CT
UA
L S
IZE
189
Recommended Socket / Receptacle Series for Pneumatic Test Probes PN1002 is RCP118.
See Page 190 for detailed information.
≡ Test Probes Ordering Code Example
PN1002 R CG 5 4 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.60 2.2
Technical Specifications
Recommended Working Stroke: 6.00 mm [0.236]
Maximum Stroke: 10.00 mm [0.394]
Contact Force at Work.Stroke: 0.6 N (2.2 oz)
Operating Medium: Compressed Air (filtered, oil-free)
Operating Pressure: 6 bar (86 psi)
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copperr
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles PN1002
PN
1002
190
RCP118 PN03
Installation Height• Fixed: 5.90 mm [0.232]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
4CA 5 3 R 1.30 0.051
CG 5 4 R 2.50 0.098
3UB 5 4 R 1.50 0.059
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
R Rhodium
Plunger Material
Code Material
5 Steel*Note: The Sockets / Receptacles
RCP118 and PA1040 can be used from Grid 3.50 mm (140 Mil) up.
Tool for PN1002 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP10000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Pneu
mat
ic T
est
Prob
es ▪
100
Mil
/ 2.
54 m
m
Pneu
mat
ic T
est
Prob
es ▪
100
Mil
/ 2.
54 m
m
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N PN03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height & Max. Stroke
Quick wire change solution.
PA1040Material: Brass - Gold Plated
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Centers 100 Mil / 2.54 mm
PN1003 Pneumatic Test Probes
PN
1003
A
CT
UA
L S
IZE
191
Recommended Socket / Receptacle Series for Pneumatic Test Probes PN1003 is RCP118.
See Page 192 for detailed information.
≡ Test Probes Ordering Code Example
PN1003 R CG 5 4 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Technical Specifications
Recommended Working Stroke: 6.00 mm [0.236]
Maximum Stroke: 10.00 mm [0.394]
Contact Force at Work.Stroke: 0.8 N (2.9 oz)
Operating Medium: Compressed Air (filtered, oil-free)
Operating Pressure: 6 bar (86 psi)
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm
Tip Styles PN1003
PN
1003
192
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
4CA 5 3 R 1.30 0.051
CG 5 4 R 2.50 0.098
3UB 5 4 R 1.50 0.059
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
R Rhodium
Plunger Material
Code Material
5 Steel
RCP118 PN03
Installation Height• Fixed: 5.90 mm [0.232]
• Variable: not variable
Material: Brass
Plating: Hard Gold
*Note: The Sockets / Receptacles RCP118 and PA1040 can be used from Grid 3.50 mm (140 Mil) up.
Tool for PN1003 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP10000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.60 2.2
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N PN03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Pneu
mat
ic T
est
Prob
es ▪
100
Mil
/ 2.
54 m
m
Pneu
mat
ic T
est
Prob
es ▪
100
Mil
/ 2.
54 m
m
Quick wire change solution.
Installation Height & Max. Stroke
PA1040Material: Brass - Gold Plated
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Quick wire change solution.
PA1040Material: Brass - Gold Plated
Centers 140 Mil / 3.50 mm
PN1401 Pneumatic Test Probes
PN
1401
A
CT
UA
L S
IZE
193
Recommended Socket / Receptacle Series forPneumatic Test Probes PN1401 is RCP134.
See Page 194 for detailed information.
≡ Test Probes Ordering Code Example
PN1401 R 1CA 5 5 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
AC
TUA
L S
IZE
Centers 140 Mil / 3.50 mm
Tip Styles PN1401
PN
1401
194
RCP134 PN03
Installation Height• Fixed: 5.90 mm [0.232]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
1CA 5 5 R 1.30 0.051
TA 5 3 R 3.00 0.118
1UB 5 3 R 2.00 0.078
≡ Tip Diameter Code changes according to the Tip Style.
Plunger Plating
Code Material
R Rhodium
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 6.00 mm [0.236]
Maximum Stroke: 10.00 mm [0.787]
Contact Force at Work.Stroke: *1.10 N (4.0 oz) or
1.50 N (5.4 oz)
Operating Medium: Compressed Air (filtered, oil-free)
Operating Pressure: 6 bar (86 psi)
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Note: The Sockets / Receptacles RCP134 and PA1040 can be used from
Grid 4.00 mm (160 Mil) up.
Tool for PN1401 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP16000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP134 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR14035
Extraction BitTBR16071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Pneu
mat
ic T
est
Prob
es ▪
140
Mil
/ 3.
50 m
m
Pneu
mat
ic T
est
Prob
es ▪
140
Mil
/ 3.
50 m
m
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP134 N PN03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Centers 140 Mil / 3.50 mm
PN1402 Pneumatic Test Probes
PN
1402
A
CT
UA
L S
IZE
195
Recommended Socket / Receptacle Series forPneumatic Test Probes PN1402 is RCP134.
See Page 196 for detailed information.
≡ Test Probes Ordering Code Example
PN1402 R 1CA 5 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Pneumatic Probes use compressed air to activate the plunger. When compressed air is applied then the plunger shoots out of the barrel and contacts the test point. The spring inside the barrel has the function to retract the plunger to its home position after turning off the compressed air.The Pneumatic Probes offer the ideal solution when only a few test points need to be contacted from the side or angularly. And in the case of only a few test points they also offer a cost-effective solution instead of using spring-loaded probes mounted in the moving probe plate of a Test Fixture.
AC
TUA
L S
IZE
Centers 140 Mil / 3.50 mm
Tip Styles PN1402
PN
1402
196
RCP134 PN03
Installation Height• Fixed: 5.90 mm [0.232]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height
Plunger Material
Code Material
5 Steel
Technical Specifications
Recommended Working Stroke: 6.00 mm [0.236]
Maximum Stroke: 10.00 mm [0.787]
Contact Force at Work.Stroke: *1.10 N [4.0 oz] or
1.50 N [5.4 oz]
Operating Medium: Compressed Air (filtered, oil-free)
Operating Pressure: 6 bar [86 psi]
Max. Current: 2 - 3 A (continuous)
Average Resistance: max. 30 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: SUS / Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Note: The sockets / Receptacles RCP134 and PA1040 can be used from Grid
4.00 mm (160 Mil) up.
≡ Tip Diameter Code changes according to the Tip Style.
Tool for PN1402 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP16000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP134 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR14035
Extraction BitTBR16071
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
1CA 5 3 R 1.30 0.051
TA 5 3 R 3.00 0.118
1UB 5 3 R 2.00 0.078
Plunger Plating
Code Material
R Rhodium
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
M 1.50 5.4
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP134 N PN03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Pneu
mat
ic T
est
Prob
es ▪
140
Mil
/ 3.
50 m
m
Pneu
mat
ic T
est
Prob
es ▪
140
Mil
/ 3.
50 m
m
Quick wire change solution.
PA1040Material: Brass - Gold Plated
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
Pneu
mat
ic A
cces
sori
es
197 198
PA Pneumatic Accessories
PA
AC
TU
AL
SIZ
E
Pneumatic Accessories PA
PA
PT1
PT3
PT1
PT3
PT1
PT2
PT2
PT2
PT3
PT3
PA 1008 - Threaded Air Terminal
PA 1009 - T Air Divider PA 1012 - 10 Pieces Air Divider
PA 1038 - Pneumatic Air Hose Y FittingMaterial: Plastic
PA 1003 - Threaded Air Terminal
PA 1000 - Air Reducer
PA 1004 - Threaded Air Terminal
PA 1001 - Air Reducer
PA 1005 - Threaded Air Terminal
PA 1017 - Threaded Plug for PA1012 with seal PA 1018 - Threaded Plug Plug for PA1009; PA1012 with seal
PA 1019 - Air Reducer from G 1/8" to M5 for PA1012
PA 1040- Quick wire change solution
PA 1002 - Air Reducer
PA 1013 - Pneumatic Air HoseMaterial: Plastic
PA 1014 - Pneumatic Air HoseMaterial: Plastic
PA 1015 - Pneumatic Air HoseMaterial: Plastic
With a big variety of accessories, we offer complete solution from one hand, in order to operate your Pneumatic Test Probes in the shortest time possible. Please make your selection and contact your DUTs with Pneumatic Test Probes.
Material: Brass
Pneu
mat
ic A
cces
sori
es
PN
EUM
ATIC
AIR
HO
SE
≡ Pneumatic Accessories Ordering Code Example
PA1017a
a: Series
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡199 200
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
EJ 0 3 1.96 0.077
EM0 3 1.57 0.062
0 4 1.96 0.077
EP0 3 3.30 0.130
0 4 2.49 0.098
EQ 0 3 3.96 0.156
RA0 5 1.17 0.046
0 6 1.96 0.077
TD 0 3 1.96 0.077
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
BP1000 Battery Probes Tip Styles BP1000B
P10
00
BP
1000
Bat
ter
y Pr
obe
s ▪ 1
00 M
il /
2.54
mm
Bat
ter
y Pr
obe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Technical Specifications
Recommended Working Stroke: 1.27 mm [0.050]
Full Stroke: 1.27 mm [0.050]
Max. Current: 5 A (continuous)
Average Resistance: ≤ 185 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Beryllium Copper / Nickel Silver Barrel Plating: -
Spring Material: Spring Steel Silver Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1000 R EJ 0 3 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
RCP065U SR03
Installation Height• Fixed: 2.72 mm [0.107]
• Variable: not variable
Material: Nickel Silver
Plating: No Plating
RCP065U CR03
Installation Height• Fixed: 2.72 mm [0.107]
• Variable: not variable
Material: Nickel Silver
Plating: No Plating
RCP065U WR03
Installation Height• Fixed: 2.72 mm [0.107]
• Variable: not variable
Material: Nickel Silver
Plating: No Plating
WW Post: Brass - Gold Plated
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.60 2.5
M 1.25 4.5
N 1.85 6.7
Installation Height
Tool for BP1000 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10036 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP65U Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR10035
Extraction BitTBR11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Tip Diameter Code changes according to the Tip Style.
Recommended Socket / Receptacle Series for Battery Test Probes BP1000 is RCP65U. See Page 200 for detailed information.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle
RCP065U N SR04x y z
Code Material
No letterNickel Silver (no plating)
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Not available standard insertion / extraction tool for this tip size in default grid.
Please See Page 7 for list of Special Tools.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡201 202
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
BP1002 Battery Probes Sockets / Receptacles RCP066B
P10
02
RC
P06
6
Bat
tery
Pro
bes ▪ 1
00 M
il /
2.54
mm
Bat
tery
Pro
bes ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Application:
• Charging Units
• PCB-to-PCB Contacting
• Docking Stations
Technical Specifications
Recommended Working Stroke: 1.00 mm [0.039]
Full Stroke: 1.60 mm [0.063]
Max. Current: 3 A (continuous)
Average Resistance: ≤ 30 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Phosphor Bronze
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Probe diameter Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1002 R RA 0 3 N
a b c d e f g
BP1002 R CG 0 4 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.08 3.9
N 1.98 7.1
Tool for BP1002 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP10036 TBP10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CC 0 3 * 0.80 0.031
CG 0 4 1.91 0.075
RA
0 3 * 0.80 0.031
0 4 1.03 0.041
0 6 1.99 0.078
TA 0 3 1.99 0.078
UE0 4 1.50 0.059
0 5 1.80 0.071
RCP066 CRF13
Installation Height• Fixed: 5.20 mm [0.204] or
4.80 mm [0.189]
• Variable: not variable
Material: Phosphor Bronze
Plating: Hard Gold
WW Post: Brass - Gold Plated
Installation Height
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP066 N CRF13x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Tip Diameter Code changes according to the Tip Style. Recommended Socket / Receptacle Series for Battery Test Probes BP1002 is RCP066.See Page 202 for detailed information.
RCP066 VRF39RCP066 WRF38
*Battery probes with these Tip Styles are longer 10.40 mm [0.409]
Tool for RCP066 Sockets / Receptacles Contains:Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Extraction Bit
Universal Pressing Bit Customized Pressing Bit
TH1 TBP10000 TBR10035 TBR10070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Wire Length : 700 mm [approx 27.0]
Design Code Description
WR Wire-Wrap Square Post
CR Crimp
VRF Pre-wired / top flanged
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡203 204
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
RA 8 3 1.02 0.040
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
RA 8 3 1.07 0.042
AC
TUA
L S
IZE
Centers 100 Mil / 2.54 mm Centers 100 Mil / 2.54 mm
BP1003 Battery Probes Battery Probes BP1004B
P10
03
BP1
004
Bat
ter
y Pr
obe
s ▪ 1
00 M
il /
2.54
mm
Bat
ter
y Pr
obe
s ▪ 1
00 M
il /
2.54
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Installation: Probe without Socket / Receptacle. Direct Placement. Solder into PCB or other materials.
Technical Specifications
Recommended Working Stroke: 0.70 mm [0.028]
Full Stroke: 1.40 mm [0.055]
Max. Current: 3.5 A (continuous)
Average Resistance: ≤ 20 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Probe Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Technical Specifications
Full Stroke: 1.00 mm [0.055]
Max. Current: 1.5 A (continuous)
Average Resistance: ≤ 10 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Stainless Steel
Mounting Hole Size: Probe Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1003 R RA 8 3 XSa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
≡ Test Probes Ordering Code Example
BP1004 R RA 8 3 Sa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
8 Brass
Plunger Material
Code Material
8 Brass
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.80 2.9
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
S 1.00 3.6
Tool for BP1003 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP10000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for BP1004 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
- -
TH1 TBP10000 - -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Tip Diameter Code changes according to the Tip Style.
≡ Tip Diameter Code changes according to the Tip Style.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centers 118 Mil / 3.00 mm Centers 118 Mil / 3.00 mm
BP1200 Battery Probes Tip Styles BP1200B
P12
00
BP
1200
Bat
tery
Pro
bes ▪ 1
18 M
il /
3.00
mm
Bat
tery
Pro
bes ▪ 1
18 M
il /
3.00
mm
AC
TU
AL
SIZ
E
205 206
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Application:
• Charging Units
• PCB-to-PCB Contacting
• Docking Stations
Technical Specifications
Recommended Working Stroke: 1.00 mm [0.039]
Full Stroke: 1.20 mm [0.047]
Max. Current: 5 - 8 A (continuous)
Average Resistance: ≤ 10 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1200 R CA 0 3 USa b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
US 0.60 2.2
XS 1.00 3.6
L 2.00 7.2
Tool for BP1200 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Recommended Socket / Receptacle Series for Battery Test Probes BP1200 is RCP091.See Page 206 for detailed information.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP091 N NR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CA 0 3 1.30 0.051
LB 0 3 1.30 0.051
RA0 3 1.00 0.039
0 4 1.30 0.051
RCP091 NR03
Installation Height• Fixed: 2.80 mm [0.291]
Variable: not variable
Material: Brass
Plating: Hard Gold
RCP091 NR05
Installation Height• Fixed: 2.80 mm [0.291]
Variable: not variable
Material: Brass
Plating: Hard Gold
Tool for RCP091 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR12535
Extraction BitTBR12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Installation Height
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡207 208
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
3RA 0 3 1.30 0.091
AC
TUA
L S
IZE
Centers 118 Mil / 3.00 mm Centers 118 Mil / 3.00
BP1203 Battery Probes Battery Probes BP1203B
P12
03
BP1
203
Bat
ter
y Pr
obe
s ▪ 1
18 M
il /
3.00
mm
Bat
ter
y Pr
obe
s ▪ 1
18 M
il /
3.00
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Technical Specifications
Recommended Working Stroke: 3.30 mm [0.130]
Full Stroke: 4 mm [0.157]
Max. Current: 5 - 8 A (continuous)
Average Resistance: ≤ 20 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Probe Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1203 R 3RA 0 3 Na b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
US 0.50 1.8
L 2.00 7.2
Tool for BP1203 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
TH1 TBP10000 TBP11835 TBP11870
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Tip Diameter Code changes according to the Tip Style.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Recommended Socket / Receptacle Series for Battery Test Probes BP1200 is RCP091.See Page 208 for detailed information.
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP091 N NR05x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Installation Height
RCP091 NR03
Installation Height• Fixed: 5.70 mm [0.224]
Variable: not variable
Material: Brass
Plating: Hard Gold
RCP091 NR05
Installation Height• Fixed: 0.224 mm [0.291]
Variable: not variable
Material: Brass
Plating: Hard Gold
Tool for RCP091 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP10000
Customized Pressing BitTBR12535
Extraction BitTBR12570
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡209 210
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers x Mil / 4.00 mm
BP1601 Battery Probes Tip Styles BP1601B
P16
01
BP
1601
Bat
tery
Pro
bes ▪ 1
60 M
il /
4.00
mm
Bat
tery
Pro
bes ▪ 1
60 M
il /
4.00
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Application:
• Charging Units
• PCB-to-PCB Contacting
• Docking Stations
Installation: Probe without Socket / Receptacle. Direct Placement. Solder into PCB or other materials.
≡ Test Probes Ordering Code Example
BP601 R CA 0 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Tool for BP1601 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CG0 4 - 2.30 0.091
0 5 - 3.50 0.138
FA 0 3 - 2.30 0.091
3HK 0 3 - 2.30 0.091
RA 0 3 2.30 0.091
UE 0 3 - 2.30 0.091
≡ Tip Diameter Code changes according to the Tip Style.
Technical Specifications
Recommended Working Stroke: 2.80 mm [0.028]
Full Stroke: 3.50 mm [0.055]
Max. Current: 10 A (continuous)
Average Resistance: ≤ 10 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Probe Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
Plunger Material
Code Material
0 BeCu
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.80 2.9
S 1.20 4.3
M 1.50 5.4
N 2.50 9.0
XL 3.50 12.6
Installation Height
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡211 212
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG0 4 2.30 0.091
0 5 3.50 0.138
FA 0 3 2.30 0.091
3HK 0 3 2.30 0.091
RA0 2 2.03 0.080
0 3 2.30 0.091
UE 0 3 2.30 0.091
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
BP1602 Battery Probes Tip Styles BP1602B
P16
02
BP
1602
Bat
tery
Pro
bes ▪ 1
60 M
il /
4.00
mm
Bat
tery
Pro
bes ▪ 1
60 M
il /
4.00
mm
AC
TU
AL
SIZ
E
211 212
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Technical Specifications
Recommended Working Stroke: 2.80 mm [0.110]
Full Stroke: 3.50 mm [0.138]
Max. Current: 10 A (continuous)
Average Resistance: ≤ 10 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1602 R CG 0 4 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
RCP118 SR03
Installation Height• Fixed: 7.40 mm [0.291]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Type BP1602 with Closed Barrel. Solderable into PCB.
Installation Height
Tool for BP1602 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Tip Diameter Code changes according to the Tip Style.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Recommended Socket / Receptacle Series for Battery Test Probes BP1602 is RCP118. See Page 212 for detailed information.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.80 2.9
S 1.20 4.3
M 1.50 5.4
N 2.50 9.0
XL 3.50 12.6
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡213 214
Tip StylesPlunger Material
Tip Diameter
Code
Tip Diameter
mm [inches]
CG0 3 2.30 0.091
0 4 3.50 0.138
FA 0 3 2.30 0.091
3HK 0 3 2.30 0.091
RA 0 3 2.30 0.091
3RA 0 3 2.30 0.091
UE 0 3 2.30 0.091
AC
TUA
L S
IZE
Centers 160 Mil / 4.00 mm Centers 160 Mil / 4.00 mm
BP1604 Battery Probes Tip Styles BP1604B
P16
04
BP
1604
Bat
tery
Pro
bes ▪ 1
60 M
il /
4.00
mm
Bat
tery
Pro
bes ▪ 1
60 M
il /
4.00
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Technical Specifications
Recommended Working Stroke: 2.80 mm [0.110]
Full Stroke: 3.50 mm [0.138]
Max. Current: 10 A (continuous)
Average Resistance: ≤ 10 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP1604 R CG 0 4 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
RCP118 SR03
Installation Height• Fixed: 7.40 mm [0.291]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Type BP1604 with Closed Barrel. Solderable into PCB.
Installation Height
Tool for BP1604 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP16000 - TBP16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP118 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP16000
Customized Pressing BitTBR16035
Extraction BitTBR16070
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
≡ Tip Diameter Code changes according to the Tip Style.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP118 N SR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Recommended Socket / Receptacle Series for Battery Test Probes BP1604 is RCP118. See Page 214 for detailed information.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.80 2.9
S 1.20 4.3
M 1.50 5.4
N 2.50 9.0
XL 3.50 12.6
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡215 216
AC
TUA
L S
IZE
Centers 256 Mil / 6.50 mm Centers 256 Mil / 6.50 mm
BP2601 Battery Probes Tip Styles BP2601B
P26
01
BP
2601
Bat
tery
Pro
bes ▪ 2
56 M
il /
6.50
mm
Bat
tery
Pro
bes ▪ 2
56 M
il /
6.50
mm
AC
TU
AL
SIZ
E
Battery Probes are designed and used for charging batteries or connecting different equipment with each other. Typical usages are docking stations and portable devices of Telecom, Medical, Navigation and Communication Equipment.
Note: Custom-built requirements can be offered on demand.
Technical Specifications
Recommended Working Stroke: 3.20 mm [0.126]
Full Stroke: 4.00 mm [0.157]
Max. Current: 5 - 8 A (continuous)
Average Resistance: ≤ 30 mΩ
Operating Temperature: - 10 °C up to + 80 °C [- 14 °F up to + 176 °F]
Barrel Material: Brass - Gold Plated
Spring Material: Spring Steel Gold Plated
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger Plating
Code Material
No letter Hard Gold
≡ Test Probes Ordering Code Example
BP2601 R CA 5 3 Ma b c d e f g
a: Series • b: Plunger Plating • c: Tip Style • d: Plunger Material • e: Tip Diameter Code • f: Spring Force Code • g: Special Tip Diameter [mm x 100]
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Plunger Material
Code Material
0 BeCu
RCP220 NR03
Installation Height• Fixed: 7 mm [0.275]
• Variable: not variable
Material: Brass
Plating: Hard Gold
RCP220 NR05
Installation Height• Fixed: 7 mm [0.275]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Installation Height
Tool for BP2601 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP30000 TBP25635 -
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
Tool for RCP220 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP30000
Customized Pressing BitTBR25636
Extraction BitTBR25671
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP220 N SR05x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
Recommended Socket / Receptacle Series for Battery Test Probes BP2601 is RCP220. See Page 216 for detailed information.
Spring Force at Working Stroke (2/3)
Code Rated force
(N) [oz]
XS 0.60 2.2
S 1.50 5.4
M 3.00 10.8
N 4.00 14.4
XL 8.00 28.8
Tip StylesPlunger Material
Tip Diameter
Code
Plunger Plating
Tip Diameter
mm [inches]
CA 5 3 - 4.00 0.157
CG 5 3 - 4.00 0.157
RA 8 3 - 4.00 0.157
RC 8 3 N- 4.00 0.157
RD 8 3 - 4.00 0.157
≡ Tip Diameter Code changes according to the Tip Style.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
Centres 256 Mil / 6.50 mm Centres 256 Mil / 6.50 mm
KP2560 Kelvin Test Probes Tip Styles KP2560K
P25
60
KP
2560
Kelv
in T
est
Prob
es ▪
256
Mil
/ 6.
50 m
m
Kel
vin
Test
Pro
bes ▪ 2
56 M
il /
6.50
mm
AC
TU
AL
SIZ
E
217 218
Kelvin Test Probes have 2 independent Plungers, and are primarily used for 4-wire resistance measurement.
CONCEPT FOR SUPPLIER APPROVAL !
Ezen rajz, modell, szellemi termék az Equip-Test Kft. jogos tulajdonát
C Surface area:
0.25
6
1.20
0
0.02
0
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 3.0 mm [0.118]
• Full Stroke: 3.50 mm [0.138]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 2 mm [0.079]
• Full Stroke: 2.50 mm [0.098]
Total Spring Force• Total Spring Force by Working Stroke
6.5 N - 23.4 [oz]
Average Resistance: max. 10 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Plated
Operating Temperature: - 40 °C up to + 120 °C [- 40 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger PlatingCode Material
No letter Hard Gold
Plunger MaterialCode Material
0 BeCu5 Steel
Recommended Socket / Receptacle Series for Kelvin Test Probes KP2560 is RCP185. See Page 218 for detailed information.
≡ Test Probes Ordering Code Example
KP2560 G4 M A Ma b c d e
a: Series b: Inner Plunger Tip Style c: Inner Plunger Spring Force d: Outer Plunger Tip Style e: Outer Plunger Spring Force
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Tool for KP2560 Series Test Probes Contains: Tool Handle + Exchangeable Bit(s) - has to be chosen*
Tool Handle w. shaft Insertion Bits Insertion & Extraction Bit
Universal Tip Diameter not Wider than Probe Plunger
Tip Diameter Wider than Probe Plunger
-
TH1 TBP30000 - TBP25670
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
M 5.00 18.0
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
M 1.50 5.4
Inner Plunger Tip StylePlunger Material
Tip Diameter x Tip Lenght
mm [inches]
U2 5 1.00 x 0.50 0.039 x 0.019
G4 5 1.00 x 1.50 0.039 x 0.059
Outer Plunger Tip StylePlunger Material
Plunger Diameter
mm [inches]
A 0 6.00 0.236
≡ Tip Diameter Code changes according to the Tip Style.
RCP185 NR03
Installation Height• Fixed: 7.80 mm [0.307]
• Variable: not variable
Material: Brass
Plating: Hard Gold
Tool for RCP185 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP30000
Customized Pressing BitTBR25635
Extraction BitTBR25670
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
493.000.01
221.001.3
370.058.1
420.006.0
950.005.1
Quick wire change solution.
PLG1027
Material: Brass - Tin Plated
Installation Height
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCP185 N NR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡219 220
AC
TUA
L S
IZE
Centres 256 Mil / 6.50 mm Centres 256 Mil / 6.50 mm
KPT2560 Kelvin Test Probes Tip Styles KPT2560K
PT2
560
KP
T256
0
Kelv
in T
est
Prob
es ▪
256
Mil
/ 6.
50 m
m
Kel
vin
Test
Pro
bes ▪ 2
56 M
il /
6.50
mm
AC
TU
AL
SIZ
E
Kelvin Test Probes have 2 independent Plungers, and are primarily used for 4-wire resistance measurement.
Ezen rajz, modell, szellemi termék az Equip-Test Kft. jogos tulajdonát
C Surface area:
1.20
0
0.25
6
0.02
0
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 3.0 mm [0.118]
• Full Stroke: 3.50 mm [0.138]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 2 mm [0.079]
• Full Stroke: 2.50 mm [0.098]
Total Spring Force• Total Spring Force by Working Stroke
6.5 N - 23.4 [oz]
Average Resistance: max. 10 mΩ
Barrel Material: Phosphor Bronze / Beryllium Copper
Spring Material: Spring Steel Plated
Operating Temperature: - 40 °C up to + 120 °C [- 40 °F up to + 248 °F]
Mounting Hole Size: Socket / Receptacle Diameter + 0.01 - 0.03 mm [0.394 - 1.181 mil] drill bits are recommended.∆
Plunger PlatingCode Material
No letter Hard Gold
Plunger MaterialCode Material
0 BeCu
5 Steel
Recommended Socket / Receptacle Series for Kelvin Test Probes KP2560 is RCT217. See Page 220 for detailed information.
≡ Test Probes Ordering Code Example
KPT2560 G4 M A Ma b c d e
a: Series b: Inner Plunger Tip Style c: Inner Plunger Spring Force d: Outer Plunger Tip Style e: Outer Plunger Spring Force
By default Plunger is Hard Gold plated and it is not marked in the PO Code. Fill position b: only if different.
Tool for KP2560 Series Test Probes
Insertion & Extraction Bit
TBT25670
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
∆ Varies from used drilling technologies and raw materials. For more Technical information consult with us at: [email protected]
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
M 5.00 18.0
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
M 1.50 5.4
Inner Plunger Tip StylePlunger Material
Tip Diameter x Tip Lenght
mm [inches]
U2 5 1.00 x 0.50 0.039 x 0.019
G4 5 1.00 x 1.50 0.039 x 0.059
Outer Plunger Tip StylePlunger Material
Plunger Diameter
mm [inches]
A 0 6.00 0.236
≡ Tip Diameter Code changes according to the Tip Style.
RCT217 NR03
Installation Height• Fixed: 7.80 mm [0.307]
• Variable: variable
Material: Brass
Plating: Hard Gold
Tool for RCT217 Sockets / Receptacles Contains: Tool Handle + Exchangeable Bit(s)
- has to be chosen*
Handle TH1
Universal Pressing BitTBP30000
Customized Pressing BitTBR25637
Extraction BitTBR25671
*Exchangeable Bits above always need a Tool Handle for proper use. Tool Handle fits to all Exchangeable Bits from this catalog.
C
Installation Height
≡ Socket / Receptacle Ordering Code Example Socket / Receptacle Plating
RCT217 N NR03x y z
Code Material
No letter Hard Gold
x: Series • y: Socket / Receptacle Plating • z: Option
By default Socket / Receptacle is Hard Gold plated and it is not marked in the PO Code. Fill position y: only if different.
493.000.01
221.001.3
370.058.1
420.006.0
950.005.1
Quick wire change solution.
PLG1027
Material: Brass - Tin Plated
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
AC
TUA
L S
IZE
221 222
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
396.100.34
241.006.3
811.000.3
930.000.1
5.3WS
4WS
530.009.0
380.001.2
042.105.13
354.005.11
671.064.4
771.005.4
581.007.4
751.000.4
621.002.3
371.004.4
396.100.34
241.006.3
811.000.3
930.000.1
5.3WS
4WS
380.001.2
530.009.0
042.105.13
354.005.11
671.064.4
771.005.4
751.000.4
621.002.3
5.0x5M
712.005.5
371.004.4
≡ Test Probes Ordering Code Example
RF0506 L 3 N I Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT0506 L 3 N I Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting MCX Jack
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF0506and RFT0506.
See Page 230 for detailed information.
RF0506 Series of Radio-frequency Probes are designed for MCX Jack-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
Frequency Range: Up to 4 GHz
RF4004 & RFT4004 RF Test Probes
RF4
004
- P
CB
AC
TU
AL
SIZ
E
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 1.00 mm [0.039]
• Full Stroke: 1.50 mm [0.059]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.60/ 7.60/ 9.60 N - 20.1/ 27.3/ 34.5 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 4 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
RF4004 Series of Radio-frequency Probes are designed for PCB connection up to 4 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
930.000.1
970.000.2
632.000.6
771.005.4
980.052.2
671.064.4
581.007.4
970.000.2
847.104.44
042.105.13
805.009.21
712.005.5
771.005.4
751.000.4
371.004.4
CMOC.SEBORPTSET
DEVRESER STHGIR LLAHf 8672 OSI NID :ecnarelot lareneG
1102 HGIRYPOC GNIWARD ELACS TON OD
930.000.1
970.000.2
652.005.6
771.005.4
5.0x5M
712.005.5
980.052.2
671.064.4
970.000.2
847.104.44
042.105.13
805.009.21
712.005.5
771.005.4
751.000.4
371.004.4
≡ Test Probes Ordering Code Example
RF4004 A 2 S G6 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT4004 A 2 S G6 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for PCB Contacting
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 0.80 2.9
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 14.4
M 6.00 21.6
L 8.00 28.8
RF
Test
Pro
bes ▪ U
p to
4 G
Hz
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF4004 and RFT4004.
See Page 230 for detailed information.
Frequency Range: Up to 6 GHz
RF Test Probes RF0506 & RFT0506
RF0
506
- M
CX
Jack
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡
396.100.34
431.004.3
930.000.1
391.009.4
5.3WS
4WS
780.002.2
130.008.0
042.105.13
354.005.11
671.064.4
771.005.4
632.000.6
621.002.3
712.005.5
751.000.4
371.004.4
5.0x5M
C 1102 HGIRYPOC ACS TON OD
223 224
Frequency Range: Up to 6 GHz
RF0606 & RFT0606 RF Test Probes
RF0
606
- S
MB
Plu
gA
CT
UA
L S
IZE
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
771.005.4
5.3WS
4WS
950.005.1
751.000.4
042.105.13
605.058.21
647.153.44
712.005.5
671.064.4
771.005.4
581.007.4
791.000.5
371.004.4
771.005.4
350.053.1
5.3WS
4WS
751.000.4
5.0x5M
950.005.1
042.105.13
605.058.21
647.153.44
712.005.5
671.064.4
771.005.4
791.000.5
712.005.5
751.000.4
371.004.4
≡ Test Probes Ordering Code Example
RF0606 C 4 N J2 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT0606 C 4 N J2 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting SMB Plug.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF0606 and RFT0606.
See Page 230 for detailed information.
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
RF0606 Series of Radio-frequency Probes are designed for SMB Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
AC
TUA
L S
IZE
Frequency Range: Up to 6 GHz
RF Test Probes RF0706 & RFT0706
RF0
706
- S
MB
Jac
k
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
391.009.4431.004.3930.000.1
5.3WS
4WS
780.002.2
130.008.0
042.105.13
354.005.11
671.064.4
771.005.4
581.007.4
632.000.6
621.002.3
751.000.4
371.004.4
≡ Test Probes Ordering Code Example
RF0706 L 2 N I Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Test Probes Ordering Code Example
RFT0706 L 2 N I Sa b c d e g
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting SMB Jack.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF0706 and RFT0706.
See Page 230 for detailed information.
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
RF0706 Series of Radio-frequency Probes are designed for SMB Jack-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡225 226225
Frequency Range: Up to 6 GHz
RF0806 & RFT0806 RF Test Probes
RF0
806
- S
MC
Plu
gA
CT
UA
L S
IZE
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
811.000.3
600.051.0
5.3WS
4WS
950.005.1
751.000.4
042.105.13
354.005.11
396.100.34
561.002.4
671.064.4
771.005.4
581.007.4
791.000.5
751.000.4
371.004.4
811.000.3
600.051.0
5.3WS
4WS
751.000.4
5.0x5M
950.005.1
042.105.13
354.005.11
396.100.34
561.002.4
671.064.4
771.005.4
791.000.5
712.005.5
751.000.4
371.004.4
≡ Test Probes Ordering Code Example
RF0806 C 4 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Test Probes Ordering Code Example
RFT0806 C 4 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting SMC Plug.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Test Probes RF0806 & RFT0806.
See Page 230 for detailed information.
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
RF0806 Series of Radio-frequency Probes are designed for SMC Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
AC
TUA
L S
IZE
Frequency Range: Up to 6 GHz
RF Test Probes RF1206 & RFT1206
RF1
206
- S
MA
Jac
k
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
170.008.1
780.002.2
712.005.5
5.3WS
4WS
652.005.6
042.105.13
062.006.6935.0
07.31
087.102.54
671.064.4
771.005.4
581.007.4
513.000.8
371.004.4
170.008.1
780.002.2
712.005.5
5.3WS
4WS
652.005.6
5.0x5M
042.105.13
062.006.6935.0
07.31
087.102.54
671.064.4
771.005.4
513.000.8
712.005.5
751.000.4
371.004.4
≡ Test Probes Ordering Code Example
RF1206 L 8 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT1206 L 8 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting SMA Jack.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF1206 and RFT1206.
See Page 230 for detailed information.
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
RF1206 Series of Radio-frequency Probes are designed for SMA Jack-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡227 228
AC
TUA
L S
IZE
Frequency Range: Up to 6 GHz
RF Test Probes RF2806 & RFT2806
RF2
806
- MS
/MM
Sw
itch
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
740.002.1
431.004.3
420.006.0 051.0
08.3
317.105.34
5.3WS
4WS
771.005.4
042.105.13
274.000.21
671.064.4
581.007.4
751.000.4
011.008.2
020.015.0
371.004.4
431.004.3
420.006.0
621.002.3
317.105.34
5.3WS
4WS
740.002.1
771.005.4
042.105.13
274.000.21
671.064.4
751.000.4
011.008.2
020.015.0
712.005.55.0x5M
371.004.4
≡ Test Probes Ordering Code Example
RF2806 G 2 N J1 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT2806 G 2 N J1 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting MM8130 / 8430 / MS 156 Switch
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF2806 and RFT2806.
See Page 230 for detailed information.
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
RF2806 Series of Radio-frequency Probes are designed for MM8130 / 8140 / MS 156 Switch-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
396.100.34
570.009.1
451.009.3
5.3WS
4WS
760.007.1
042.105.13
354.005.11
671.064.4
771.005.4
581.007.4
751.000.4
011.008.2
371.004.4
920.047.0
396.100.34
570.009.1
451.009.3
5.3WS
4WS
760.007.1
5.0x5M
042.105.13
354.005.11
671.064.4
771.005.4
751.000.4
011.008.2
371.004.4
920.047.0
712.005.5
≡ Test Probes Ordering Code Example
RF2506 C 2 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT2506 C 2 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting U.FL Plug.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF2506 and RFT2506.
See Page 230 for detailed information.
RF2506 Series of Radio-frequency Probes are designed for UFL Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
Frequency Range: Up to 6 GHz
RF2506 & RFT2506 RF Test Probes
RF2
506
- U
.FL
Plu
gA
CT
UA
L S
IZE
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡ 230
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.70 mm [0.059]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
712.005.5780.002.2
5.3WS
4WS
652.005.6
950.005.1
042.105.13
062.006.6935.0
07.31
087.102.54
671.064.4
771.005.4
581.007.4
513.000.8
371.004.4
712.005.5
680.071.2
5.3WS
4WS
652.005.6
5.0x5M
950.005.1
042.105.13
062.006.6935.0
07.31
087.102.54
671.064.4
771.005.4
513.000.8
712.005.5
751.000.4
371.004.4
CMOC.SEBORPTSET
DEVRESERSTHGIRLLAHf8672OSINID:ecnarelotlareneG
1102HGIRYPOC D
≡ Test Probes Ordering Code Example
RF3006 C 4 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Spring Force of Outside Grounding
≡ Threaded Test Probes Ordering Code Example
RFT3006 C 4 N J Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for contacting SMA Plug.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 14.4
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF3006 and RFT3006.
See Page 230 for detailed information.
RF3006 Series of Radio-frequency Probes are designed for SMA Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
Frequency Range: Up to 6 GHz
RF2806 & RFT2806 RF Test Probes
RF2
806
- MS
/MM
Sw
itch
AC
TU
AL
SIZ
E
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
811.000.3
712.005.5
621.002.3
098.100.84
5.3WS
4WS
740.002.1
042.105.13
056.005.61
671.064.4
771.005.4
581.007.4
751.000.4
011.008.2
020.015.0
371.004.4
811.000.3
712.005.5
621.002.3
098.100.84
5.3WS
4WS
530.098.0
042.105.13
056.005.61
671.064.4
771.005.4
751.000.4
011.008.2
020.015.0
712.005.55.0x5M
371.004.4
≡ Test Probes Ordering Code Example
RF2806 G 2 N J2 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT2806 G 2 N J2 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for MM8130/8430/MS 156 Switch.
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF2806 and RFT2806.
See Page 230 for detailed information.
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
RF2806 Series of Radio-frequency Probes are designed for MM8130 / 8140 / MS 156 Switch-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
AP
PR
OX
SIZ
E
Frequency Range: Up to 6 GHz
RF Test Probes RF3006 & RFT3006
RF3
006
- S
MA
Plu
gR
F Te
st P
robe
s ▪ U
p to
6 G
Hz
229
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡ 232
AC
TUA
L S
IZE
Frequency Range: Up to 6 GHz
RF Receptacles RF Test Probes Inner Plungers
RFI
2051
Ser
ies
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips:
Beryllium Copper / Hard Gold plated
Spring Material: Spring Steel Plated
≡ Test Probes Ordering Code Example
RFI2051 G 2 Na b c d
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force
Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
≡ Test Probes Ordering Code Example
RFI2051 A 2 S Ka b c d e
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Special Design
Inner Plungers for RF4004 & RFT4004 - PCB
Inner Plungers forRF2806 & RFT2806 -
MM8130 / 8140 / MS 156
RFI 2051 A2 SK RFI 2051 E2 SK
Inne
r Pl
unge
rs f
or R
F te
st P
robe
s
The RF Series exchangeable Inner Plungers have the function of the Signal Pin in our RF Probes. Due to their exchangeability our RF probes are the best choice during the whole life-cycle of the product.
RRF1
Material: Brass
Plating: Hard Gold
RRFT1
Material: Brass
Plating: Hard Gold
Feature: Threaded
Technical Specifications
Mechanical Data - Spring-Loaded Inner Plunger • Recommended Working Stroke: 2.00 mm [0.079]
• Full Stroke: 3.7 mm [0.146]
Mechanical Data - Outside Grounding• Recommended Working Stroke: 4.00 mm [0.157]
• Full Stroke: 5.00 mm [0.197]
Total Spring Force• Total Spring Force by Working Stroke
5.30/ 6.00/ 7.30/ 8.00/ 9.30/ 10.00 N 19.1/ 21.6/ 26.3/28.8 / 33.5/ 35.9 [oz]
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Materials• Barrel: Brass• Inner Plunger Tips: Beryllium Copper / Hard Gold plated
Cable Data• Connection Test Probe: MCX
641.007.3
800.002.0
751.000.4
042.001.6
950.005.1
5.3WS
4WS
042.105.13
422.007.5674.0
01.21
717.106.34
671.064.4
771.005.4
581.007.4
371.004.4
CMOC.SEBORPTSET
DEVRESERSTHGIRLLAHf8672OSINID:ecnarelotlareneG
1102HGIRYPOC
641.007.3
800.002.0
751.000.4
042.001.6
950.005.1
5.3WS
4WS
5.0x5M
042.105.13
422.007.5674.0
01.21
717.106.34
671.064.4
771.005.4
712.005.5
371.004.4
≡ Test Probes Ordering Code Example
RF4706 C 4 N I1 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
≡ Threaded Test Probes Ordering Code Example
RFT4706 C 4 N I1 Sa b c d e f
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force e: Outside Grounding Design &
Diameter f: Outer Plunger Spring Force
Threaded RF Test Probe for Fakra Plug Contacting
Inner Plunger Spring Force at Working Stroke
Code Rated force
(N) [oz]
N 1.30 4.7
X 2.00 7.2
Outside Grounding Spring Force at Working Stroke
Code Rated force
(N) [oz]
S 4.00 15.8
M 6.00 21.6
L 8.00 28.8
Receptacles RRF1 and RRFT1 are used for Radio-Frequency Probes RF4706 and RFT4706.
See Page 230 for detailed information.
RF4706 Series of Radio-frequency Probes are designed for Fakra-type Plug-based applications up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
RF4
706
- FA
KR
AA
CT
UA
L S
IZE
RF
Test
Pro
bes ▪ U
p to
6 G
Hz
Frequency Range: Up to 6 GHz
RF4706 & RFT4706 RF Test Probes
RFI 2051 G2 N
231
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡233 234
AC
TU
AL
SIZ
E
Frequency Range: Up to 6 GHz RF Cable Assemblies
RFI2051 Series RF Test Probes Inner Plungers Cable Confection, Module Assemblyand Custom Made RF Solutions RF Cable Assemblies
RFI
2051
Ser
ies
Cus
tom
ized
AC
TU
AL
SIZ
E
Technical Specifications:
Electrical Data• Nominal Impedance: 50 Ω• Frequency Range: Up to 6 GHz
Cable Data• Type: Multiflex 86
• Length: 750 mm [29.527]• Connection Test Probe: MCX• Connection Testing Technology: SMA
• Insulated
≡ Test Probes Ordering Code Example
RFI2051 C 4 Na b c d
a: Series b: Inner Plunger Tip Style c: Tip Diameter d: Inner Plunger Spring Force
Inner Plunger for RF0506 & RFT0506 - MCX Jack
Inner Plunger for RF1206 & RFT1206 - SMA Jack
RFI 2051 L2 N RFI 2051 L3 N RFI 2051 L8 N
≡ RF Cable Assembly Ordering Code Example
RFCA I MCX 75 SMAa b c d
a: Series b: Connection to Test Probe c: Lenght of the Cable d: Connection to Testing System
RFCA I MCXm75 A
RFCA I MCX75 SMA
Complete service from one supplier:
• Consultancy
• Development
• Generating drawings
• Manufacturing the samples
• Trial series
• Manufacturing of Cables and Component Assembly
• Logistics
• Warehousing
Complete manufacturing process from one source:
• During the assembly our trained staff prepares and manufactures complex Cable Harnesses with the most cost-effective manufacturing processes.
• Prototypes, small and large production runs
• Bandaging, winding, taping, threads in covers and spiral sleevings
• Flat and flat-round Cable Processing
• Energy Chain Cables and assembling
• Over-molded Cable Assemblies with Macromeltor high-injection molding
• Cross-sections from 0.04 mm² up to 120 mm²
• Crimping, Soldering and Splicing
For more information please contact: [email protected]
Equip-Test provides Custom Made RF Cable Assemblies.
QualityDuring manufacturing first priority is given to our commitment to quality. We provide single-piece product testing for each of our products.
ReliabilityWe provide the shortest lead-time on the market to ensure on-time delivery according to customer needs.
PriceWe offer competitive pricing with cost-effective design & manufacturing. This means a clear benefit for both parties.
4
Inner Plunger for RF2506 & RFT2506 - UFL.m. Plug
Inner Plunger for RF0706 & RFT0706 - SMB Jack
Inner Plunger for RF3006 & RFT3006 - SMA PlugRF0806 & RFT0806 - SMC Plug
RFI 2051 C2 N RFI 2051 C4 N
Inne
r Pl
unge
rs f
or R
F te
st P
robe
s
RF
Cab
le A
ssem
blie
s
RFI 3051 G2 N
Inner Plungers forRF2806 & RFT2806
- MM8130 / 8140 / MS 156
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡235 236
AC
TU
AL
SIZ
E
Frequency Range: 3 GHz to 6 GHz Frequency Range: 3 GHz to 6 GHz
RF9000 001 & 002 RF Test Probes RF Test Probes RF9000 003 & 004
RF9
000
001
& 0
02
RF9
000
003
& 0
04
AC
TU
AL
SIZ
E
Technical Specifications
Frequency Range: DC to 6GHz
Nominal Impedance: 50 Ω
Temperature Range: -40 to +90 °C
Voltage Rating: 250 V r.m.s.
Withstanding Voltage: AC 300 V
Contact Resistance: max. 20 mΩ
Insulation Resistance: min. 500M Ω
Voltage Standing Wave Ratio (V.S.W.R.):
DC to 3GHz max. 1.60
3GHz to 6GHz max. 2.00
Insertion Loss:
DC to 3GHz max. 0.6 dB
3GHz to 6GHz max. 1.5 dB
Technical Specifications
Frequency Range: DC to 6GHz
Nominal Impedance: 50 Ω
Temperature Range: -40 to +90 °C
Voltage Rating: 250 V r.m.s.
Withstanding Voltage: No evidence of breakdown
Contact Resistance:
Center contact max. 25.0 mΩ
Outer contact max. 20.0 mΩ
Insulation Resistance: min. 500M Ω
Voltage Standing Wave Ratio (V.S.W.R.):
DC to 3GHz TBD
3GHz to 6GHz TBD
Insertion Loss:
DC to 3GHz TBD
3GHz to 6GHz TBC
The Floating Mechanism is not attached within the probe. Connector Jig with Floating Mechanism must be used. The engagement strokes from the flange to the tip of probe is 18.28 mm [0.720 in] to 19.78 mm [0.779 in] with vertical (0±2°) direction.
Automatic Measurement Probe RF9000 002. Floating Mechanism is attached within the Probe.
Automatic Measurement Probe RF9000 004 for testing Microwave Coaxial Connectors. The pressure force is 5N to 9N with vertical (0+/-2 degree).
453.000.9
036.000.61
x2 06.2 201.0 URHT
641.007.3
791.000.5
672.000.7
577.086.91
A2-SNU
63-4/1
913.105.33
951.050.4
625.053.31
258.056.12
560.056.1
2C.TFKTSET-PIUQE
DEVRESERSTHGIRLLA
:ECITON!gnitalperofeberasnoisnemidllA
6.1
2
detaercD3
5102.60.42dleifidoM
5102.60.42
.5102.11.81
Hf8672OSINID:ecnarelotlareneG mm86.9201:aeraecafruS
000009TFR
1102HGIRYPOC
3-5.0 6-3 03-6 021-03 004-02102.051.001.050.050.0
gninedraH
( )
lautcelletni ,ledom ,gniward sihT .dtL tseT-piuqE ot sgnoleb tcudorp gniypoc ,ytrap .dr3 ot ti gnidrawroF
kémret imellezs ,lledom ,zjar nezE tánodjalut sogoj .tfK tseT-piuqE za
kidamrah asátíbbávoT .izepék,asátísorozskos ,kenylémezs
za asálánzsahlef ygav asálosám eylédegne sosárí .tfK tseT-piuqE tegéssőlelef igojőtetnüb ,lüklén
!nátu agam tahnov
!LAVORPPAREILPPUSROFTPECNOC
:NOISIVER
annoDdiváD
:ELTIT
GNIWARDELACSTONOD
etaDerutangiSemaN
GFM
D'VPPA
D'KHC
NWARD
A-PIUQE
195.000.51
787.000.02
x2 06.2 201.0 URHT
051.008.3
312.004.5
549.000.42
A2-SNU 63-4/1
493.000.01
913.105.33
751.000.4
605.058.21
997.003.02
890.005.2
2C.TFK TSET-PIUQE
DEVRESER STHGIR LLA
:ECITON! gnitalp erofeb era snoisnemid llA
6.1
detaerc D3
5102.60.42dleifidoM
5102.60.42
.5102.11.81
Hf 8672 OSI NID :ecnarelot lareneG mm 15.7951:aera ecafruS
200 0009 TFR
1102 HGIRYPOC
3 - 5.0 6 - 3 03 - 6 021-03 004-02102.051.001.050.050.0
( )
kémret imellezs ,lledom ,zjar nezE tánodjalut sogoj .tfK tseT-piuqE za
kidamrah asátíbbávoT .izepék,asátísorozskos ,kenylémezs
za asálánzsahlef ygav asálosám eylédegne sosárí .tfK tseT-piuqE tegéssőlelef igojőtetnüb ,lüklén
!nátu agam tahnov
! LAVORPPA REILPPUS ROF TPECNO
:NOISIVER
annoD diváD
C
D
A
B
:ELTIT
GNIWARD ELACS TON OD
etaDerutangiSemaN
D'KHC
NWARD
ATSET-PIUQE
C Surface area:
453.000.9
036.000.61
x2 06.2 201.0 URHT
201.006.2791.0
00.5
787.000.02
A2-SNU 63-4/1
672.000.7
913.105.33
051.008.3
615.001.31
348.004.12
560.056.1
2C.TFK TSET-PIUQE
DEVRESER STHGIR LLA
:ECITON! gnitalp erofeb era snoisnemid llA
detaerc D3 5102.60.42
Hf 8672 OSI NID :ecnarelot lareneG mm 11.2301:aera ecafruS1102 HGIRYPOC
3 - 5.0 6 - 3 03 - 6 021-03 004-02102.051.001.050.050.0
( )
kémret imellezs ,lledom ,zjar nezE tánodjalut sogoj .tfK tseT-piuqE za
kidamrah asátíbbávoT .izepék,asátísorozskos ,kenylémezs
za asálánzsahlef ygav asálosám
:NOISIVER
:ELTIT
GNIWARD ELACS TON OD
etaDerutangiSemaN
AT-PIUQE
≡ Test Probes Ordering Code Example
RF9000 001a b
a: Series b: Plunger Tip Style
RF
Test
Pro
bes ▪ U
3 G
Hz
and
6 G
Hz
RF
Test
Pro
bes ▪ U
3 G
Hz
and
6 G
Hz
RF9000 001 Series of Radio-frequency Probes are designed for various applications - from 3 GHz up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
RF9000 003 Series of Radio-frequency Probes are designed for various applications - from 3 GHz up to 6 GHz at 50 Ω impedance. They ensure effective transfer of High-frequency Signals.
≡ Equip-Test™ • [email protected] • www.equip-test.com Equip-Test™ • [email protected] • www.equip-test.com ≡237
Notes
Not
es
Customer Contact Information
Company Name:
Person's Name:
Street:
Post code / Country:
E-mail:
Fax:
Phone:
Cell Phone:
Short product & application description
Dimension Units mm inch
Expected Quantity:
Please fill out and scan in this data!
Send by e-mail to: [email protected] or Fax it to: +3629356480.
≡ Equip-Test™ • [email protected] • www.equip-test.com
Customer Contact Information
Company Name:
Person's Name:
Street:
Post code / Country:
E-mail:
Fax:
Phone:
Cell Phone:
Short product & application description
Dimension Units mm inch
Expected Quantity:
Please fill out and scan in this data!
Send by e-mail to: [email protected] or Fax it to: +3629356480.
HUNGARY - HEADQUARTERS
Equip - Test Kft.
Vágóhíd u. 19.H-2220 Vecsés, Hungary
Phone number: + 36 29 550 940Fax: + 36 29 356 480E-mail: [email protected]
GERMANY
Equip - Test GmbH
Max-Stromeyer-Str. 116D-78467 Konstanz, Deutschland
Phone number: + 49 7531 6984377Fax: + 49 7531 6984379Mobile: + 49 151 12929189E-mail: [email protected]
SLOVAKIA
Equip - Test s.r.o.
Čečinová 16/GSK 821 05 Bratislava, Slovakia
Phone number: + 421 243 411 999Fax: + 421 43 413 097E-mail: [email protected]
CZECH REPUBLIC
Equip - Test s.r.o.
Slovákova 8CZ 602 00 Brno, Czech Republic
Phone number: + 420 541 420 076E-mail: [email protected]
UKRAINE
Ekip - Test Ukraine TOV
Hoydy str., 10 office 72Uzhgorod, 88000, Ukraine
Phone number: + 380 312 61 23 98Mobile: + 380 50 432 4188E-mail: [email protected]
SERBIA
Multi - Test d.o.o.
Topolski put 65.21220 Bečej, Serbia
Phone number: + 381 652 054 160E-mail: [email protected]
POLAND
Equip - Test Sp. z o. o.
Balicka 16030-198 Kraków, Poland
Phone number: + 48 12 426 02 60Fax: + 48 12 426 02 61E-mail: [email protected]
BULGARIA
Equip - Test OOD
Dimitar Petkov str. Nr. 69 2nd Floor, Office 3Sofia 1309, Bulgaria
Mobile: +359 89 465 3694E-mail: [email protected]
ROMANIA
Echip - Test s.r.l.
Str. Locomotivei Nr.4410431 Oradea, Romania
Phone number: + 40 259 410 121Fax: + 40 259 410 121E-mail: [email protected]
ASIA - SINGAPORE
Equip - Test Asia PTE. LTD.
11 Kallang Place#04-05Singapore 339155
Phone number: +65 9768 7686Fax: + 65 6834 3046E-mail: [email protected]
www.equip-test.com
™ DISTRIBUTOR