envirochem environmental monitoring services
DESCRIPTION
Envirochem offer a wide range of monitoring services such as: Noise & Vibration Surveys, Air Quallity Surveys, Emissions Testing.TRANSCRIPT
NOISE, DUST
AND VIBRATION Environmental Monitoring Tailored made services to suit your every need, delivering quality and excellence at affordable prices.
Reference No:ENV001
24:7 Data
collection
Real time with text
alerts to your
mobile
Personalised
service to meet
your needs
State of the art
equipment, easy
to install
Competitively
priced, discount
for long term
projects
Envirochem Analytical Laboratories Ltd
12 The Gardens Broadcut Fareham
PO16 8SS
www.envirochem.co.uk
E-mail: [email protected]
Tel: 01329 287777
Page 2 Environment Monitoring
Contact Us
Envirochem
12 The Gardens Broadcut
Fareham Hampshire PO16 8SS
Tel: 01329 287777
Fax: 01329 287755 [email protected] www.envirochem.co.uk
Contents
Environmental
Perimeter Testing
Noise and Vibration
Dust Monitoring
Gravimetric Dust
Sampling
Frisbee Dust
Sampling
Envirochem can now offer their clients a variety of new services that includes perimeter monitoring equipment, used to measure dust, noise, and vibration at specified locations throughout the site and can be used to provide environmental data during site activities or demonstrate compliance, in line with BS 5228 and the local Environmental Authority
Static monitors positioned at the site boundary are capable of measuring ambient noise and vibration levels over a specified time period. Data is recorded at pre-set intervals and statistically analysed to generate a weekly report. The report will provide analytical data assisting in the management of noise and vibration produced from demolition or high impact site activities, and will demonstrate compliance with agreed limits or operating conditions stipulated by the local authority.
Both noise and vibration monitors are capable of sending text alerts to inform site managers if a pre-defined trigger level is breached and conforms to the Class 1 accuracy standard of IEC 61672.
Proposed Testing Equipment
Vibrosound noise monitors with real time analyser
Magnus TA1 Transducers
Castle acoustic calibrator
All noise survey equipment proposed conforms to Type 1 accuracy standard of IEC 60651
Recent Project
Environmental Monitoring Page 3
Light scattering technology can be used to determine the ambient concentration of airborne particles. The results of which are used to react to incidents of elevated dust as they occur. Monitors can also be programmed to send text alerts to site staff, should predetermined levels be exceeded.
Envirochem would propose using Osiris light meters to automatically measure airborne particulates in real time. These monitors can simultaneously measure the concentrations of Total Suspended Particles (TSP), and are sensitive to airborne concentrations down to a fraction of a microgram per cubic meter. An optional weather sensor can also be fitted and is capable of measuring and recording wind speed and wind direction.
Involves the collection of a physical sample of the airborne particles, that can be analysed for chemical composition and concentration. Inhalable dust is defined as less than 100 µm and approximates to the fraction of airborne material which enters the nose and mouth during normal breathing and is therefore available for deposition in the respirable tract.
Designed for short term testing of up to 4 hours, pumps can be deployed both in the morning and afternoon on a daily basis to give accurate dust measurements of total inhalable dust over a short term period. Pumps can be deployed in any location, from the site boundary to the cab of demolition machinery during works.
A Dust Frisbee utilises a collecting bowl made of anodized spun aluminium, and is designed to collect airborne dust over a long term period of generally up to 1 month. Measurements of total inhalable dust may then be calculated for the duration of the sampling.
The sample face is supported to a height of 1.7m above the ground and is connected to a rain water vessel at its base. The collection bowl is lined with a 10mm thick foam disc and also incorporates a bird strike preventer comprising of a ring of fine fishing line supported 5cm above the sampling bowl.
If you have any further questions regarding sampling costs, or would like to arrange sampling on site,
please do not hesitate to call.
Environmental Monitoring Page 4
Client Site
Kier Construction Former Ordnance Survey Site, Southampton
Project Highlights
Envirochem carried out environmental perimeter
monitoring during the demolition of the former
Ordnance survey site in Southampton. Airborne
Dust, noise and vibration levels were all monitored
using state of the art equipment.
Project Description
Three monitoring stations were identified in
conjunction with the client and the Environmental
Health officer (EHO). Monitoring instruments
were installed in these locations by our
environmental consultants, with the equipment
going live on the same day. Dust, noise and
vibration limits set by the EHO were programmed
into the instruments, allowing text alerts to be sent
to site staff if any parameter limit was exceeded.
Weekly reports were generated and sent directly to
site management. The combination of reports and
real time text alerts formed the basis of a
management plan communicated to local business
and residents.
Former Ordnance Survey Site, Southampton
Equipment Description The vibrosound noise and vibration monitors are used
in conjunction with a Magnus TA1 Transducer and a
Type 1 accuracy sensor conforming to IEC 60651.
Dust monitoring ultilises Light scattering technology
using Osiris light meters, which automatically
measures the airborne particulates in real time. An
optional weather station measuring wind speed and
direction can also be fitted, providing further useful
environmental conditions.
ENVIROCHEM PROJECT PROFILE: