engr reg form 1a1
TRANSCRIPT
-
7/28/2019 Engr Reg Form 1A1
1/7
Application Form for Registered Engineer
Check List of Documents to Be AttachedBy the Applicant with the Application Form
Attested Copies of: Tick()
1HSSC Pre-Engineering/Pre-Medical with Additional Maths /DAE/A-Level withequivalence certificate from IBCC
2 Engineering Degree / Provisional CertificateTo whom it may concern certificate is not acceptable
3 Transcripts/Detailed Marks Certificate
4 Copy of CNIC
5 Three Passport size photographs with blue background
6 Copy of Passport showing the date of exit and arrival (For foreign degree holders only)
7 Copy of certificate of credit transfer from one university to another university along with
detailed marks certificate/registration certificate (If applicable)
PEC-1
Pakistan Engineering CouncilAtaturk Avenue (East) G-5/2, P.O.Box No.1296, Islamabad.
UAN:111-111-732, Fax: 051-2276224
E-mail: [email protected]
Passport size
Photograph with
blue back ground
(Paste here)
-
7/28/2019 Engr Reg Form 1A1
2/7
APPLICATION FOR REGISTRATIONAs Registered Engineer
The Registrar
Pakistan Engineering Council
Islamabad.
Dear Sir,
I request that my name may be registered on the Register ofPakistan Engineering Council asRegistered Engineer under the Pakistan Engineering Council Act 1976 with following particulars andqualifications so that I may be furnished with a Certificate of Registration:
1. Name of Applicant(As per degree)
2. Fathers/Husband Name(As per degree)
Day Month Year
3. Date of Birth
4. CNIC Number
5. PermanentAddress
5.1 Present PostalAddress
5.2 Office Address
5.3 MobileNumber
5.4 Telephone Office 5.5.Residence#.
5.6 E-Mail 5.7.Fax Number
6. Nationality District of Domicile Religion
PAKISTANI SIALKOT ISLAM
2 8 ---- 0 8 ---- 1 9 8 9
4 2 4 0 1 __ 3 5 2 6 5 2 8 __ 7
0 3 3 2 -- 3 5 0 0 1 7 4
MUHAMMAD AMMAR NAVEED
NAVEED IHSAN
MUHAMMAD SAEED BAJWA, MODEL TOWN NEAR CIVIL
HOSPITAL _______________________________
Tehsil: PASRUR __ District:_ SIALKOT _______________
_C-13/II KANUPP COLONY HAWKS BAY ROAD NEAR
MAURIPUR VILLAGE, P.O BOX 75780________________
Tehsil: _KEMARI________ District:__KARACHI-WEST __
________________________________________________________
________________________________________________________
-
7/28/2019 Engr Reg Form 1A1
3/7
10. Employment Status
Government Semi Government Private Unemployed
Name of the Organization /Department
11. I certify that the above particulars mentioned by me are correct. I undertake to inform theRegistrar, Pakistan Engineering Council, of any change in my postal address and profession. I
also undertake to abide by the PEC Act, Bye-Laws, relevant rules and Codes of Ethics and
Conduct, prescribed for the members of the Council.
Yours Faithfully,
Signature of Applicant
Dated: __28 08 - 1989___ Name of Applicant: _MUHAMMAD AMMAR NAVEED______________________________________________________________________________Attested By:
Engr. Designation: ..
PEC Registration No: ..... Mobile #: ......
Signature: ...... Dated: ..
(FOR OFFICE USE ONLY)
7. Qualifications: Name of College/University
Year ofPassing
%age/CGPA
Discipline along withSpecialization
7.1 F.Sc Pre-Engg/ICS/DAE/
A-Level
SALEEM NAWAZFIZAIA COLLEGE
MASROOR, KARACHI.
FBISE
2008 63.09% PREENGINEERING
7.2B.E./B.Sc. Engg.
Degree or
Equivalent
INSTITUTIE OFINDUSTRIAL
ELECTRONICS
ENGINEERING
(aff. NED University)
2012 3.0
INDUSTRIAL
ELECTRONICS
ENGINEERING
Qualifications: Name of Institute/ College/University
Year ofPassing
Discipline along withSpecialization
8. Postgraduate Engg.Qualifications. NIL NIL NIL
9. Professionalaffiliations withstatus
NIL NIL NIL
-
7/28/2019 Engr Reg Form 1A1
4/7
1. Finance Department
Prescribed Fee of Rs.. has been received and credited vide.
Bank Challan No. .. Dated .
Bank Draft No... Dated .
(Accounts Clerk) Accounts Officer Finance Manager
(PEC Branch )
2. Registration Department
Mr/Ms_____________________________________ passed/obtained engineering qualification fromthe university/institution/college as mentioned below:-
Sr.No Name of qualification anddiscipline
Name of
Institute/College/University
Discipline Year of
Graduation
2.1 B.E/B.Sc Engineering orEquivalent
2.2 Postgraduate Qualifications
2.3 Professional affiliationswith status
5. Recommendation of PEC Secretariat:
_____________________________________________________________________________________
6. Decision of Enrolment Committee:
Chairman
7. Registration No Allotted: ______________________________ Enrolment Committee
8. Certificate Issued at Sr.#
3. Result Notification No with date
4. Accreditation Status
-
7/28/2019 Engr Reg Form 1A1
5/7
PEC Registration No
Date of Registration
9. Registration valid upto: 31/12/20 __ __ RegistrarForm PEC-2
INDEX CARD OF THE APPLICANTPAKISTAN ENGINEERING COUNCIL
(For Official Use only)
Name of applicant
(As per degree)
Fathers/Husband
Name
(As per degree)Day Month Year
Date of Birth
CNIC Number
Mobile Number
Sex District of Domicile
Email
Current
Employment
Qualification
Three Specimen Signatures of the Applicant:
(1) (2) (3)
2 8 ---- 0 8 ---- 1 9 8 9
4 2 4 0 1 __ 3 5 2 6 5 2 8 __ 7
0 3 3 2 -- 3 5 0 0 1 7 4
Male Female
B.E/B.Sc or Equivalent Name of University/Institution Year of Graduation
B.E (IndustrialElectronics)
INSTITUTE OF INDUSTRIAL
ELECTRONICS ENGINEERING(Aff. With NED UET, Karachi)
2012
MUHAMMAD AMMAR NAVEED
NAVEED IHSAN
Unemployed
Paste hereOne
Passport size
Photo graph
with blue
background
SIALKOT
ammarnaveed101 hotmail.com
-
7/28/2019 Engr Reg Form 1A1
6/7
Attested by Engr. PEC Registration No: .Designation: ...................Mobile #: ....
Signature: ........... Registrar
Dated: .. Pakistan Engineering Council
Instructions
The registration form shall be filled in capital letters by the applicant in his own handwriting
with neat, legible hand or typed. Forms of graduates of Pakistani Engineeringuniversities/Colleges shall be attested by *any PEC Member or Principal /
Dean/HOD/Registrar and will be submitted to the Registrar, Pakistan Engineering Council,Ataturk Avenue (East) G-5/2, P.O.Box No.1296, Islamabad along with the documents
described under in any Liaison /Branch or Head Office. In case of an Engineering graduate
from foreign university / institute, the form shall be attested by a Professional Engineer ofgrade 18 or above, or by a senior engineer who is registered Professional / Consulting
Engineer.
Photo copies of CNIC, HSSC, Engineering degree and its transcripts duly attested by *anyone of the above mentioned persons. In case, the degree has not been issued, duly attested
photo copy of Provisional Certificate issued by the concerned university will be acceptedinitially for registration. But, the applicant will have to submit copy of degree within one
year from the date of registration.
Three passport size photographs with blue background, duly attested on the back side by*any one of the above mentioned persons.
Index Card be filled by applicant with three specimen signatures in the space provided and
attested by *any one of the above mentioned persons.
Registration Fee can be deposited in PEC HQ, Islamabad or any PEC Branch/Liaison Officealongwith Bank draft, Pay order, Cheque in favour of Pakistan Engineering Council as per
following rates:
(i) Registration of fresh graduates from Pakistani universities = Rs 1,000/-
(including Rs 400 as processing fee and Rs 200/year for next three yearsincluding current year)
(ii) Such graduates who could not obtain PEC registration would be charged fee
with penalty of Rs 200/- per year from year of graduation in addition to fee
mentioned in part (i)
(iii) Registration of fresh graduates from Foreign Universities =Rs 5,000/-
(including Rs.4,400 as processing fee and Rs.200/year for next three years
-
7/28/2019 Engr Reg Form 1A1
7/7
including current year)
(iv) A Registered Engineer shall obtain subsequent renewal within six months of
its expiry on payment of Rs.500/year, failing which a penalty of Rs.500/year
shall be imposed
(v) A Registered Engineer has to obtain a minimum of five years practicalexperience in relevant field of engineering from a recognized engineering
organization or institution or service and earn requisite credit points to
become eligible for Engineering Practice Examination (EPE).
(vi) A Registered Engineer(RE) will has to pass Engineering Practice
Examination(EPE) to get a prestigious title of Professional Engineer(PE)
Reference: Professional development of engineers byelaws 2008
Note: Fee can also be deposited through on-line account No 700006-0 at MCBCorporate Branch (code 1134), Blue Area Islamabad. However, acknowledgement
receipt must be attached with the application form.