english - hector a. sierra s. - resume 2014
TRANSCRIPT
HECTOR ALFONSO SIERRA SIERRA Project Engineer - Engineering Team Leader
Mobile: (+57) (300) 569-4020 / (+57) (310) 867-6456
E-mail: [email protected]
[email protected] [email protected]
PROFESSIONAL PROFILE
Senior Eng ineer qual i f ied by more than twenty four years of exper ience wi th in the
petro-chemical indust ry and other EPC pro jects . Broad based respons ib i l i t ies as a
pro ject manager and eng ineer ing leader , pro ject techn ica l assurance leader ,
c iv i l /s t ruc tura l spec ia l is t and coord inator of EPC projec ts in Co lombia and abroad.
Comprehens ive knowledge and broad exper ience on conceptua l , bas ic and deta i led
engineer ing ; construc t ion s uperv is ion and techn ica l d i rec t ion dur ing the execut ion of
pro jects in the Oi l & Gas industr y as we l l as in other EPC projects which require
in tegrat ion of severa l engineer ing spec ia l t ies such as process , ins t rumentat ion,
p ip ing , mechanical , e lec t r ica l and c iv i l .
Act ive ly invo lved in in terd isc ip l inary pro jec ts such as:
Fac i l i t ies development on Hydrocarbon Explorat ion , Ex trac t ion , Ref in ing and
Transpor tat ion areas
Deve lopment of pe tro leum ref in ing & produc t ion p lants .
Power Genera t ion P lants .
Deve lopment of food process ing p lan ts .
PROFESSIONAL EDUCATION / TRAINING / COURSES
M.Sc. Hydrocarbon Management – Universidad de Viña del Mar – Chile In progress
B. Sc. Civil Engineering, Universidad Nacional de Colombia 1988
Engineering Projects Management –Universidad Nacional de Colombia AIEUN 2000
Project Management – Universidad Nacional de Colombia – Economy Faculty 1990
Technical English - Universidad Nacional / British Council 1990
Budgets and Construction Programming - Universidad Nacional de Colombia – AICUN 1990
Pathology of Structures – ACI Colombian Section 1989
Concrete Technologies – Universidad Nacional de Colombia – AICUN 1987
STANDARDS AND SOFTWARE SKILLS
Knowledge and use of technical standards and design codes such as:
IP Exxon International Practices of Exxon Mobil Corporation
API American Petroleum Institute, API 650 / API 620 / API 686 / API 653
IBC International Building Ccode - ICC
AISC American Institute of Steel Construction
ACI, American Concrete Institute ACI 318 - ACI 350
NFPA National Fire Protection Association - NFPA 10 / NFPA 30
Knowledge and use of specialized software as
Ms PROJECT (Advanced)
Ms Excel (Advanced)
SAP2000 (Advanced)
STAAD PRO (Intermediate)
ROBOBAT (Intermediate)
AutoCAD (Advanced)
RESPONSIBILITIES
As Project Engineer
I offer the required support to carry out all activities related to:
Participation on the evaluation of reference terms and project philosophy.
Qualification of proposals for engineering, construction and Erection.
Particular knowledge of all engineering specialties involved in the project.
Define project’s scope and deliverables schedule.
Quantification and control of man-hours in the development of conceptual, basic and detailed
engineering.
Bridge between the client and other stakeholders within the project such as providers and
subcontractors.
Planning (WBS) and control of project’s integrity during all its phases (Design, Construction,
Erection and Implementation).
Comprehensive management of project changes as new requirements are introduced by the
client, this management is done by creating change orders to adjust project’s scope.
Basic coordination of HAZOP studies for revamping projects
Creation of executive reports for clients.
Budgeting and cost control, approval and supervision of equipment purchases.
Risk management for Implementing the design. HAZOP, Peer Review, Design Review and
Constructability
As Engineering Team Leader
On general engineering coordination, I am liable for:
Possessing general knowledge of all engineering specialties involved in whole projects.
Providing efficient support to project management to facilitate the execution of activities in
accordance with the scope agreed with the client.
Assisting the project manager during the project development and in the generation of external
and internal change orders. Verifying the amount of man-hours estimated taking into account
client’s needs to adjust the project scope.
Preparation of proposals and budgets including cost estimate for Engineering and built up
materials with their respective programming.
Development of Constructibility Studies. Development of programs and work strategies and
sequence of construction. Logistic works coordination, site selection, reference points and
temporary facilities.
Technical Direction and Supervision of Construction and Assembly during the design
implementation.
Quality Assurance and Quality Control for the best execution of Project.
PROFESSIONAL EXPERIENCE / PROJECTS
S N C L AV AL I N - I T AN S U C A S . A . S . July 2009 – October 2013
Position: Project Engineer and Engineering Coordinator of Hydrocarbon Projects
Duties / Responsibilities:
Integrate, coordinate and follow up the work of several engineering disciplines.
Director of technical supervision to control the detailed engineering designs which are
delivered by contractors and provide recommendations for approval in accordance with
standards and technical specifications.
Review material requisitions and approve purchase orders.
Review follow-up reports and update construction schedule of projects (both in time and
costs) and issue recommendations.
Projects:
2014
Detail Engineering – Castilla 3 Project. ECOPETROL - Production Management.
2012 - 2013
Conceptual Engineering – Costa Norte Colombia – Galan Project – Crude Evacuation
Program, PEC - ECOPETROL.
Conceptual & Basic Engineering - Magdalena Medio140 Project – Oil Warming, Tisquirama,
Pijiño del Carmen – Crude Evacuation Program, PEC - ECOPETROL.
2011
Magdalena Medio100 Project – Ayacucho Plant – Coveñas - Crude Evacuation Program,
PEC - ECOPETROL.
Magdalena Medio100 Project – Increase storage capacity Coveñas - Crude Evacuation
Program, PEC - ECOPETROL.
Gace Project Stage III – Marine Platform, CHEVRON PETROLEUM CORPORATION.
2010
Conceptual Engineering – Mansilla Pipeline - Tocancipá, ECOPETROL - VIT.
Basic Engineering – Electrical System Optimization, Ayacucho Plant, ECOPETROL - VIT.
Basic Engineering – Refined Products, Ayacucho II Plant, ECOPETROL - VIT.
Basic & Detailed Engineering – New Power System 6.3KV, Vasconia II, ECOPETROL - VIT.
Detailed Engineering Auditing, CONEQUIPOS, Tocancipá, ECOPETROL - VIT.
2009
Basic Engineering for two 120,000 bbl Storage Tanks. – Vasconia – ECOPETROL - VIT
Conceptual & Basic Engineering for new derivation between Pereira and Cartago. Puerto
Salgar Pipeline – Cartago. ECOPETROL - VIT
Conceptual Engineering for new Derivation between Chinchiná and Pereira. Puerto Salgar
Pipeline – Cartago, ECOPETROL - VIT.
Director of Technical overseeing for Detailed Engineering of ECOPETROL’s Terminal in
Tocancipá, ECOPETROL - VIT.
Basic Engineering for Revamping of Seven Control Rooms for ECOPETROL - GCB –
Barrancabermeja Refinery, ECOPETROL.
IGC ANDINA - Colombia Consultants 2004 - 2008
Position: Technical Director
Projects:
2008
Technical, administrative and financial audit for fabrication, construction and assembly of
15000 and 20000 bbl tanks, in storage terminals of Medellín and Bogotá. (CPC - CHEVRON
Petroleum Company).
Duties / Responsibilities:
Director of Technical Overseeing.
Protect the interests of CPC.
Provide direction and follow up the work of land engineers of Technical Overseeing.
Review and approve the detailed designs of the tanks, which are delivered by the
Contractor and give recommendation for approval in accordance with standards and
technical specifications.
Review and approve reports of quality of materials, steel plates, welding, testing, etc.
Review and approve welding procedures.
Review follow-up reports and update construction schedule of the project (both in time
and costs) and issue recommendations.
Review, approve and report to CPC any change in amounts of work and request for APU
for approval of the Company enclosing the justification for the changes to be made.
Report any anomaly on quality of work plan, or amounts of work, to facilities CPC
engineer, and issue appropriate recommendations.
Monitor monthly follow-up meetings for the construction and assembly tasks and other
regular meetings that may be required by CPC.
Review and approve the periodic reports of execution and progress of work.
Review and approve the final liquidation of the contract.
Review and approve the archive of documents (dossier) delivered by the Contractor.
2005 - 2007
Basic & Detailed Engineering - Center of Technical Information Resources. ECOPETROL
(Colombia Oil Company) / OTEPI - Refinery of Barrancabermeja – Colombia. 10,000 M2
Duties / Responsibilities:
General Coordination alongside with the Customer, Architects and other suppliers
Basic and Detailed Engineering
Analysis and Design of Reinforced Concrete and Steel Structures
Design of underground for wastewater, rain waters, concrete trenches and electrical
ducts.
Development and management of technical specifications for construction of civil works.
Development of Quality Plan for the appropriate execution of the Project.
Complete definition of materials along with its amounts and requisitions
2004 – 2005
Structural Pathology for water plants U-800/U-830 / U-850 - ECOPETROL (Colombia Oil
Company) / OTEPI - Refinery of Barrancabermeja – Colombia
Duties / Responsibilities:
Verification of concrete’s behavior. Disintegration, erosion, spalling, cracking, leakage,
etc.
Identification of concrete’s problems. Carbonation / sulfate attack / fluorescence.
Identification of behavior of embedded metal. Corrosion process, dispassivation,
delaminating and other deterioration mechanism.
Verification of Structural Analysis of the concrete equipments of the water plants and
reduction in Structural Capacity
Recommendations and Particular Procedures to carry out a deeper evaluation of the real
conditions of the equipments of concrete
Technical specifications for surface repair, summary of Repair and Overlay Materials for
each structure. Analysis, Strategies and Design
TECHNIP– Colombia (TIPIEL S. A.) 1994 - 2004
Duties / Responsibilities:
Civil/Structural Lead Engineer. General Coordination with other Engineering disciplines.
Basic and detailed engineering: Analysis and Design of Steel Structures for Process Buildings,
Pipe Racks, Open Frame Towers and other structures
Basic and detailed engineering: Analysis and Design of Reinforced Concrete Structures for
Process Buildings, Control Houses, Substations, etc
Analysis and design of structures foundations and equipment foundations. Pumps, compressors,
heavy machinery, heat exchangers and pressure vessels (horizontal and vertical vessels), tall
towers and storage tanks.
Preparation of technical specifications for design and construction of civil works and steel
structures.
Preparation of proposals and budgets.
Site selection for plant development, programs, work strategies and construction sequence.
Technical direction and overseeing to develop the civil work construction and assembly.
Projects:
2004
Air products – 110 MMSCFD Hydrogen Plant - USA
2003
Unleaded Gasoline/Low Sulphur Gas Oil – EPC Project Takreer Abu Dhabi Oil Refining
Company
2002
Train III of Compressors – CPF Cupiagua – BPX Co – Casanare – Colombia
CDU Unit U-150/130 Crude Factor Recovery – ECOPETROL – Barrancabermeja – Colombia
2001
Engineering “Sunshade” Contract - (LTT) - Cusiana Facilities Expansion – BP-Amoco –
Casanare-Colombia
ECOPETROL Paraffins Plant – Chillers – Engineering, Construction and Assembly
Barrancabermeja– Colombia
2000
JASMINE Facilities - Phase I – Basic and Detail Engineering - Purchases Management OMIMEX
of Colombia – Puerto Boyaca
New System for Stack # 2 – Detail Engineering – ECOPETROL -Barrancabermeja
Detailed Engineering: Structural Analysis and Design for Column C-525 – Revamping for
Industrial Plant of Monomeros Colombo-Venezolanos
Technical Supervision of Detailed Engineering for Viscosity Reduction Plant – ECOPETROL –
Cartagena – Colombia
1998 - 1999
Cusiana/Cupiagua Full Field Development – Flow Lines & Wellpads Project - BPX Co.- Casanare
- Colombia
New Pumping Station – ECOPETROL – Cisneros – Antioquia - Colombia
1997
Cusiana Expansion Sales Gas Plant BPX Co. Casanare – Colombia
Modernization for Topping 2000 Unit – ECOPETROL - GCB - Barrancabermeja - Colombia
1996
MERIELECTRICA Power Plant 160 MW – WESTINGHOUSE - Barrancabermeja – Colombia
TERMODORADA Power Plant 51.1MW – La Dorada – Caldas - Colombia
1994 – 1995
Spent Caustic & Sour Water Treatment – ECOPETROL – Cartagena - Colombia
Particleboard Plant TABLEMAC SA – Phase II Santa Rosa de Osos – Antioquia – Colombia
TECHNIP– Colombia (TIPIEL S. A.) 1989 - 1991
Duties / Responsibilities:
Leader Civil / Structural Engineer.
Analysis and Design of Steel structures and reinforced concrete
Analysis and Design of Foundations for static equipments.
Preparation of technical specifications for design and construction of civil works.
Projects:
1990
Modernization for Vapour Recovery Units (VRU) and Ethylene Unit - ECOPETROL –
Barrancabermeja
1989 – 1990
Particleboard Plant TABLEMAC SA – Phase I – TABLEMAC S. A.. – Manizales - Caldas
1989
Pilot Plant for Cellulose Pulp production from fique. Caldono, Cauca – DRI – Caldono –
Cauca
OTHER COLOMBIAN COMPANIES / INDUSTRIAL PROJECTS 1991 - 2003
Duties / Responsibilities:
Basic coordination, management of several EPC Projects and Design Implementation.
Planning definition, including buildings and equipments distribution, services Areas (On site,
Utilities and Off Sites).
Analysis and Design of Steel Structures and reinforced Concrete Structures.
Analysis and Design of Foundations for static and dynamic equipments and heavy machinery.
Tanks foundations (ring wall), Vessels, Pumps, Compressors, basins, mat slabs, etc.
General Design of underground systems
Development and management of Technical Specifications for Construction of Civil Works.
Technical Support and Construction Supervision for design implementation.
Projects:
2002
Experience with ITANSUCA Ltda
Technical and Administrative Supervision. Construction, Assembly and Configuration –
Sectorization System - Trasandino Pipeline – ECOPETROL
2000 – 2003
Experience with MAVC / EXXON MOBIL / TEXACO
Detailed Engineering Tank 14000 Barrels - Storage of Jet Gasoline - Storage Tank Ring walls
Foundation Design - Plant of Aviation Set Operation – Texaco / Exxon Mobil Corp. - “EL
DORADO” International Airport - 2003
Structural Consultancy – Design verification Warehouse - Inactive File - Texas Petroleum
Company, Texaco – Puente Aranda – Bogotá - Colombia - 2001
Detailed Engineering: Analysis and Design of Steel structure for Pipe Rack – Supply Plant -
Exxon / Mobil Corporation Medellin, Antioquia – Colombia - 2000
1995
Experience with JJ PIRAQUIVE & Co.
Basic & Detailed Engineering and Construction and Assembly for “SAN ISIDRO” Foods Industrial
Plant – Chia - Structural Analysis, Design and Construction
1993 – 1994
Experience with GRACE COLOMBIA
Engineering, Construction and Assembly for Biosida Production Plant - Dearborn Line – Bogotá
Engineering and Construction – Treatment Plant for industrial wastewater - Bogotá
1992
Experience with SADE DOMINICANA
Detailed Engineering and development budget for Electro-mechanical assembly. – Bonao – Río
Blanco - Dominican Republic
1991
Experience with ECOPETROL
Detailed Engineering - Production Facilities of Gas – Analysis and Design of Steel structures and
Foundations - Wellpad “ Cerrito 1 “ – Cúcuta - Colombia
Detailed Engineering – Steel Structures and Foundations for Electric Substation – Production
Facilities of Palagua - Puerto Boyacá – Colombia
Detailed Engineering – Steel Structures and Foundations for Electric Substation – Production
Facilities of Toldado - Tolima - Colombia
Detailed Engineering – Gas Compressor Station – Barrancabermeja - Colombia
Supports for pipe line interconnection between stations “76 x 7” and “La Cira - Infantas” - El
Centro –Barrancabermeja – Colombia
1991 – 1992
Experience with TECNICONTROL Ltda.
Production Facilities for Heavy Oil – La Linda, Toroyaco y Uchupayaco Stations - Argosy Energy
International / ECOPETROL - Putumayo - Colombia
Detailed Engineering for Shampoo Industrial Plant. - Norwich Colombiana – Inextra - Funza,
Cundinamarca - Colombia.
Detailed Engineering and Technical Supervision for Construction - Coca Cola Industrial Plant for
Production of Thermo - formed Plastic Pack Comptec - Funza – Cundinamarca – Colombia
1987 -1989
Experience with PCA – PROYECTISTAS CIVILES ASOCIADOS
Structural Analysis and design for several steel structures and reinforced concrete.
o Housing urbanizations
o Housing and Offices Buildings
o Trades Center.
Technical Assurance for Construction