engine timing tool kit... 6586 engine timing tool kit vag 1.0, 1.2, 1.4 (cod) • kit is for the...
TRANSCRIPT
www.lasertools.co.uk
6586
Engine Timing Tool KitVAG 1.0, 1.2, 1.4 (CoD)
• Kit is for the latest generation FSI VAG petrol engines fitted to Audi, Seat,Volkswagen and Skoda models.
• Including: Audi: A1/A Sportback, A3 Sedan, A3 Cabrio, A3 Saloon, A3, A3Sportback, Q3.
• Seat Leon, Leon ST, Ibiza, MII, Skoda Fabia SIII and Estate, Octavia III,Yeti, Outdoor, Citigo, Volkswagen Golf VII, Golf V1 Cabrio, Up!,Jetta, Passat, Polo, Golf SV, Sportsvan, Golf VII, Estate.
6586 - Engine Timing Tool Kit - VAG 1.0, 1.2, 1.4 (CoD)• Designed to provide all of the essential timing tools required for the latest Generation 1.0lt,
1.2lt and 1.4lt TSi/FSi petrol engines found across the VAG range. This includes the 1.4lt TFSI CoD engine.
• The CoD (Cylinder on Demand) feature is used in the modern turbocharged petrol engine that has a Cylinder Cut Off system which reduces from 4 cylinders to 2 cylinders when cruising – giving better miles per gallon
• The kit consists of the components required to lock the Crankshaft, Cam pulleys and Camshafts in their timed positions to allow the removal and replacement of the camshaft timing belt.
• The following instructions are for guidance only. Please refer to OEM derived data such as the vehicles manufactures own data or Autodata.
• The use of these engine timing tools is the user’s responsibility and Tool Connection cannot be held liable for any damage caused what so ever.
2
Components
Ref Code OEM DescriptionA C719 T10494 Camshaft Locking Tool (1.2/1.4 TFSI CoD)B C734 T10504 Camshaft Positioning Tool 9 (1.4 TFSI CoD) (European Registered Design)C C735 T10504/1 Stepped Pin for Camshaft Positioning Tool – Short (1.4 TFSI CoD)D C736 T10504/2 Stepped Pin for Camshaft Positioning Tool (1.4 TFSI CoD)E C439 T10340 Crankshaft Locking PinF C667 T10477 Camshaft Locking ToolG C685 T10499 Camshaft Drive Belt Tension WrenchH C668 T10476/A Camshaft Timing Tool (Nylon)I C450 T10264 6mm ball ended Hex Key
3
Applications
Make Model Years Type
Audi
A1/A1 Sportback
2012-2018TFSIG-TRONTFSI CoD
A3 CabrioA3 SaloonA3/A3 SportbackQ3
SeatMii
2012-2018TSILPGTGITSI ACT
LeonLeon ST
Skoda
Citigo
2013-2018 CNGFabia IIIFabia III EstateOctavia III
Volkswagen
Golf VII
2012-2018
GTEHYBRIDBLUEMOTIONTSITSI ACTBLUE GT
UpJettaPassatGolf SV/SportsvanGolf VIIGolf VII EstateGolf VII WagonGolf SV/SportsvanGolf VI CabrioGolf VII EstateGolf VII WagonPolo
Engine Code1.0 CHYA, CHYB, CPGA1.2 CJZA, CYVB, CJZB, CYVA, CJZC, CJZD, CYVD
1.4 CZCA, CXSB, CMBA, CXSA, CPWA, CHPB, CHPA, CUKB, CRJA, CUKC, CZDA, CPVA, CPVB, CPTA, CZEA
4
Instructions
Preparation and Precautions:• When loosening or tightening the camshaft or crankshaft pulley bolts ALWAYS use a pulley
holding tool• The components provided in this kit are to lock the camshaft, crankshaft in their timed
position and not designed to hold them against the load when tightening or loosening fixings.
Component Descriptions:
Component A:1.0lt, 2.0lt and 1.4lt Camshaft Alignment Tool
5
Component B, C and D:1.4 TFSI CoD Camshaft Alignment Tools
Component E:All engines - Crankshaft Locking Pin
NOTE: Fit B finger tight only in accordance with OEM instructions to avoid excessive sideways pressure being placed on the camshaft inner shaft. As long as the pins of B fully engage with the camshaft an even gap of up to 3.0mm between the cylinder head and B back plate is acceptable. Failure to adhere to this instruction could cause damage.
6
Component F and H:1.0lt engines – Camshaft Alignment
Component G:Tensioner Spanner
Component I:Ball End Hex Key 6mm
Both components are used to loosen and adjust the camshaft drive belt tensioner as per manufacturer’s instructions
H
7
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR T +44 (0) 1926 815000 F +44 (0) 1926 815888 [email protected] www.toolconnection.co.uk
If this product fails through faulty materials or workmanship, contact our service department direct on: +44 (0) 1926 818186. Normal wear and tear are excluded as are consumable items and abuse.
Guarantee
www.lasertools.co.uk
PrecautionsOur products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and information prior to their use.
Related K-Type Numbers
11754 58764 106231 108662 115204
11784 58802 106366 108663 115232
11816 58926 106367 108666 115233
11817 58943 106369 109431 115581
11973 58944 106373 109462 115584
15893 58947 106374 112379 116130
15944 59247 106377 112382 116635
15989 59596 106378 112398 116636
15995 59597 106379 113148 116637
21803 59598 106380 113149 117064
26753 59599 106385 113304 117066
29685 59616 106386 113334 117077
29725 100035 106387 113863 117375
30569 100042 106388 113864 117379
35666 100050 106389 113886 117380
53312 100072 106392 113893 117453
53686 100092 106393 113900 117777
55092 100094 106395 113901 118030
55595 100095 106414 115144 118034
55596 100777 106415 115145 119696
56142 100789 106417 115146 119697
56144 100794 106544 115152 119767
56205 100795 106545 115154 119768
56259 100796 106611 115156 119960
56779 100797 106613 115158 120209
57433 100800 107747 115163 120595
57456 101004 108131 115164 120892
57459 101156 108147 115171 123422
57462 101157 108155 115173 123424
57513 105717 108157 115178 123933
57587 105738 108160 115179 124925
57589 105748 108161 115180 124926
57590 105901 108612 115182 125249
57621 105911 108628 115183 127208
58750 105912 108655 115184 128188
58757 105917 108656 115188 128213
58758 105919 108657 115189 131223
58762 106225 108658 115190 133715
58763 106227 108661 115197