eng v l cdvario data sheet
TRANSCRIPT
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO Modular controller system Highly modular system with 4 to 30 loops: bus coupler, controller unit, any I/O modules. Required components are simply plugged together: the interconnections are made automatically. Open for all interfaces: Ethernet, Profibus DP, CANopen, DeviceNet, Modbus. Digital and analog I/O modules in different modularities: 2, 4, 6, 8 or 16 channels. Separate RS232-interface for BlueControl Engineering Tool Latest control technology with complete functional range for the most varied applications.
APPLICATIONS Machine and systems engineering Automotive industry Process technology Energy generation Traffic control Building automation
DESCRIPTION
The CD VAR-io I/O modules offer maximum flexibility for decentralized installation of I/O circuits as well as high adaptability to the most varied applications. The central component is an arbitrary bus coupler module, which also provides the supply voltage for the entire system. Open bus standards permit the unproblematic connection of the CD VAR-io system to various PLC or PC-based automation solutions. Any number of digital and analog I/O modules, each with 2 to 16 channels, can be connected to the bus coupler, thus providing optimum modularity. Apart from the standard CD VAR-io I/O modules, other dedicated units are also available, such as the stand-alone multiloop controller units (see data sheet CD VAR-io). When putting a system together, the connections for bus and power supply are made automatically by means of contact pins as soon as a module is clipped to the mounting rail. Thus, no separate interconnections are necessary. Moreover, the provision of segments with different voltage potentials is made possible by means of supply terminals.
All I/O modules are galvanically isolated on the bus side, and analog modules are also separated from each other (without additional supply terminals). Electrical process connections are made using the 2, 3, or 4-wire technique. Screened connectors provide suitable EMC protection of sensitive analog signals. All I/O wiring is done with plug-in spring clamp connector strips. In this way, tedious connection/disconnection of individual signal leads is omitted. Diagnostic and status LEDs on each module provide an immediate indication of the system’s operating condition. Clip-on inscription strips and individual terminal numbering provide clear and unambiguous signal identification.
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO BK CAN
CANOPEN BUS COUPLER Central coupler module with CANopen
interface for CD VAR-IO I/O system Baudrate up to 1 MBd, configurable Until 32 receive and 32 transmit-PDOs Connectable up to 63 CD VAR-IO modules Integated 24V-DC-power supply for total
CD VAR-IO-System APPLICATIONS Head of the CD VAR-IO-system For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Stored I/O-configuration addresses 1... 127 via DIP switches Up to 510 digital points, IN and OUT Up to 244 analog inputs, IN and OUT Trigger modes: event, timer, remote request Baudrates 10 ... 1000 kBd/s LED indicators: 9 x status and diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals 2 x 5-poliger TWIN-COMBICON-Bus-Stecker Dimensions: 90 x 119,8 x 71,5 mm (W x H x D) Power supply: 24V DC Communication: CANopen
CD VAR-IO BK DN
DEVICENET BUS COUPLER Central coupler module with DeviceNet
interface for CD VAR-IO I/O system Baudrate up to 500 KBd, configurable Cyclic messaging, polling, change of state,
bit strobe Connectable up to 63 CD VAR-IO modules Integated 24V-DC-power supply for total
CD VAR-IO-System APPLICATIONS Head of the CD VAR-IO-system For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Stored I/O-configuration Addresses 1... 127 via DIP switches Trigger modes: event, timer, remote request Baudrates 10 ... 1000 kBd/s LED indicators: 5 x status and diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals 2 x 5-poliger TWIN-COMBICON-Bus-Stecker Dimensions: 90 x 71,5 x 119,8 mm (W x H x D) Power supply: 24V DC Communication: CAN/DEVICENET
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO BK DP/V1
PROFIBUS-DP/V1 BUS COUPLER Central coupler module with PROFIBUS-
DP interface Only for CD VAR-IO Closed-Loop-Control-
System Baudrate up to 12 MBd, configurable DP/V1 for class 1 and class 2 masters Connectable up to 21 CD VAR-IO modules Internal freely configurable process-
data-caches Integated 24V-DC-power supply for total
CD VAR-IO-System APPLICATIONS Head of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES I/O and controller module parameterization CD VAR-ious diagnostic formats Sub-D connector Baudrates 9.6 ... 12000 kBd/s Addresses 1... 127 via DIP switches LED indicators: 5x status and diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals Dimensions: 91 x 120 x 71,5 mm (W x H x D) Power supply: 24V DC Communication: PROFIBUS-DP/V1
CD VAR-IO BK ETH
ETHERNET BUS COUPLER Central coupler module with Ethernet
TCP/IP interface Only for CD VAR-IO Closed-Loop-Control-
System Baudrate up to 100 MBd, configurable 10/100 BASE-T(X) Connectable up to 21 CD VAR-IO modules Integated 24V-DC-power supply for total
CD VAR-IO-System APPLICATIONS Head of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES ETHERNET: Endgerät, conformable IEEE 802.3 Protocol: Modbus/TCP, TCP/UDP, BootP IP-parameter setting via BootP or configuration tool RJ 45-connector LED indicators: 7 x status and diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals Dimensions: 90 x 116 x 72 mm (W x H x D) Power supply: 24V DC Communication: Ethernet TCP/IP
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO BK MOD
MODBUS BUS COUPLER Central coupler module with Modbus
interface Only for CD VAR-IO Closed-Loop-Control-
System Baudrate up to 38,4 kBd, configurable via
CD VAR-io Connectable up to 21 CD VAR-IO modules Integated 24V-DC-power supply for total
CD VAR-IO-System APPLICATIONS Head of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Modbus RTU-protocol addresses 1... 127 via CD VAR-IO selectable 2 LED indicators for status and diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals 2 x 9-poliger Sub-D connector for Modbus Dimensions: 90 x 119,8 x 71,5 mm (W x H x D) Power supply: 24V DC Communication: Modbus RTU
CD VAR-IO BK IP
ETHERNET IP BUS COUPLER Central coupler module with Ethernet IP
interface Only for CD VAR-IO Closed-Loop-Control-
System Baudrate up to 100 MBd, configurable 10/100 BASE-T(X) Connectable up to 21 CD VAR-IO modules Integated 24V-DC-power supply for total
CD VAR-IO-System APPLICATIONS Head of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES ETHERNET: Endgerät, conformable IEEE 802.3 Protocol :IP for Rockwell PLCs, BootP IP-parameter setting via BootP or configuration tool RJ 45-connector LED indicators: 7 x status and diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals Dimensions: 90 x 116 x 72 mm (W x H x D) Power supply: 24V DC
Communication: Ethernet TCP/IP
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO RM TX
BUS BRANCH MODULE FOR REMOTE BUS Construction of de-central controller
systems AnyCD VAR-IO- input and output can be
connected via remote bus Max. overall length per remote bus: 400
m Several CD VAR-IO RM TX modules in one
system possible I/Os are connected via bus receiver
module CD VAR-IO RM BK
APPLICATIONS Controller and I/Os are located at different places/cabinets For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 5x status and bus-diagnostics Spring clamp-/plug-in terminals with shield Dimensions: 12,2 x 120 x 71,5 mm (W x H x D) Power supply: 24 V DC through potential routing Communication: Remotebus
CD VAR-IO RM BK
BUSRECEIVER MODULE FOR REMOTE BUS I/OS Bus receiver for external CD VAR-IO-I/Os
at remote bus Max. overall length per remote bus: 400 m Several CD VAR-IO RM BK modules at one
remote bus possible Connection at CD VAR-io-system: via bus
branch module CD VAR-IO RM TX APPLICATIONS Controller and I/Os are located at different places/cabinets For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 7x status and bus-diagnostics Incoming 24V-DC supply for segment and main-circuit Spring clamp-/plug-in terminals with shield Dimensions: 48,8 x 120 x 71,5 mm (W x H x D) Power supply: 24 V DC Communication: Remotebus
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO DI 2/24
DIGITAL INPUTS 2 digital inputs Connections for sensors in 2-, 3- and 4-
wire technology Floating / non-floating contacts
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Maximum load current per sensor: 250mA
LED indicators: 3x status and diagnostics
Inputs optically isolated Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Inputs: 2 digital inputs Nominal input current: 5 mA
CD VAR-IO DI 4/24
DIGITAL INPUTS 4 digital inputs Connections for sensors in 2- and 3-wire
technology Floating / non-floating contacts
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Maximum load current per sensor: 250mA
LED indicators: 5x status and diagnostics
Inputs optically isolated Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Inputs: 4 digital inputs Nominal input current: 5 mA
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO DI 8/24
DIGITAL INPUTS 8 digital inputs Connections for sensors in 2-, 3- and 4-
wire technology Floating / non-floating contacts
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Maximum load current per sensor: 250mA LED indicators: 9x status and diagnostics Inputs optically isolated Dimensions: 48,8 x 120 mm x 71,5 (B x H x T) Power supply: 24 V DC through potential routing Inputs: 8 digital inputs Nominal input current: 5 mA
CD VAR-IO DI 16/24
DIGITAL INPUTS 16 digital inputs Connections for sensors in 2- and 3-wire
technology Floating / non-floating contacts
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Maximum load current per sensor: 250mA LED indicators: 17 x status and diagnostics Inputs optically isolated Dimensions: 48,8 x 120 mm x 71,5 (B x H x T) Power supply: 24 V DC through potential routing Inputs: 16 digital inputs Nominal input current: 5 mA
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO DO 2/24
DIGITAL OUTPUTS 2 digital outputs Connections of actuators in 2-, 3- and 4-
wire technology Nominal current per output: 0,5 A Short ciruit and overload protected
outputs APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Total current of the module: 1 A LED indicators: 3x status and diagnostics Outputs optically isolated Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Outputs: 2 digital outputs, each 0,5 A, 24 V DC
CD VAR-IO DO 4/24
DIGITAL OUTPUTS 4 digital outputs Connections of actuators in 2- and 3-wire
technology Nominal current per output: 0,5 A Short ciruit and overload protected outputs
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Total current of the module: 2 A LED indicators: 5x status and diagnostics Outputs optically isolated Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Outputs: 4 digital outputs, each 0,5 A, 24 V DC
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO DO 8/24
DIGITAL OUTPUTS 8 digital outputs Connections of actuators in 2-, 3- and 4-
wire technology Nominal current per output: 0,5 A Short ciruit and overload protected
outputs APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Total current of the module: 4 A LED indicators: 9x status and diagnostics Outputs optically isolated Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Outputs: 8 digital outputs, each 0,5 A, 24 V DC
CD VAR-IO DO 16/24
DIGITAL OUTPUTS 16 digital outputs Connections of actuators in 2- and 3-wire
technology Nominal current per output: 0,5 A Short ciruit and overload protected outputs
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Total current of the module: 8 A LED indicators: 17 x status and diagnostics Outputs optically isolated Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Outputs: 16 digital outputs, each 0,5 A, 24 V DC
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO DO 1/230
RELAY OUTPUT 1 relay changeover contact (hard gold
plated) Voltage: 5 - 253 V AC Max. current: 3 A
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 2 x status and diagnostics Safe isolation according EN 50178 Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Outputs: 1 relay changeover contact
5 - 253 V AC, 3 A
CD VAR-IO DO 4/230
RELAY OUTPUT 4 relay changeover contacts (hard gold
plated) Voltage: 5 - 253 V AC Max. current: 3 A each relay
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 5 x status and diagnostics Safe isolation according EN 50178 Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC through potential routing Outputs: 4 relay changeover contacts 5 - 253 V AC, 3 A
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO AI 2/SF
ANALOG INPUTS STANDARD SIGNALS 2 analog inputs (single ended with
shield) Connections for sensors in 2- and 3-wire
technology 16-Bit resolution Current ranges: 0/4..20mA, +/-20mA Voltage ranges: 10V, +/-10V
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Process data update: 1,5 ms Diagnostic LED Inputs optically isolated Several input formats Measuring ranges and representing formats soft configurable Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 2 analog inputs (single ended with shield)
CD VAR-IO AI 8/SF
ANALOG INPUTS STANDARD SIGNALS 8 analog inputs (single ended with shield) Connections for sensors in 2-wire
technology 16-Bit resolution Current ranges: 0/4..20mA, ±20mA, (±)
40mA Voltage ranges: 10V, ±10V, (±)5V, (±)25 V, (±)50V APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Diagnostic LED Inputs optically isolated Several input formats Measuring ranges and representing formats soft configurable Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 8 analog inputs (single ended with shield)
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO UTH 2
ANALOG INPUTS THERMOCOUPLE 2 analog inputs, differencial inputs with
shield Internal or external detetion of cold
junction temperature 16-Bit resolution Types: B, C, E, J, K, L, N, R, S, T, U, W, HK Voltage range: -15..+85 mV
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Absolute or differencial temperature measurement Process data update: max. 30 ms Diagnostic LED Inputs optically isolated Several input formats Measuring ranges and representing formats soft configurable Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing
Inputs: 2 analog inputs, differencial inputs with shield
CD VAR-IO RTD 2
ANALOG INPUTS TEMPERATURE SHUNTS 2 analog inputs Connections for sensors in 2-, 3- and 4-
wire technology 16-Bit resolution Types: a.o. Pt DIN, PT SAMA, Ni DIN, CUxx,
KTY Potentiometer, Linear R: 400, 4000 Ohm
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Diagnostic LED Process data update: max. 32 ms Inputs optically isolated Several input formats Measuring ranges and representing formats soft configurable Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 2 analog inputs
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO AO 1/SF
ANALOG OUTPUT STANDARD SIGNALS 1 analog output 2-wire technology with shield 16-Bit resolution Current ranges: 0..20mA, 4..20mA Voltage range: 10V
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Process data update: 1 ms 2 diagnostic LEDs Output optically isolated Several output formats Measuring ranges and representing formats soft configurable Dimensions: 24,4 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing
Inputs: 1 analog output
CD VAR-IO AO 2/U/BP
ANALOG OUTPUTS VOLTAGE 2 analog outputs 2-wire technology with shield 13-Bit resolution Voltage ranges: 10V, ±10V
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Process data update: 1 ms 2 diagnostic LEDs Outputs optically isolated Several output formats Measuring ranges and representing formats soft configurable Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 2 analog outputs
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO UTH 4-DO8
ANALOG / DIGITAL I/O-MODUL 4 analog thermocouple inputs differencial inputs with shield 8 digital outputs, 24V DC 1 heating current input 14-Bit resolution Types:B, C, D, E, J, K, L, N, R, S, T,W
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 3x status and diagnostics Process data update: max. 125 ms Inputs and outputs optically isolated Measuring ranges and input formats soft configurable Voltage range: 0..70 mV Dimensions: 48,8 x 120 x 71,5 mm (B x H x T)
Power supply: 24 V DC and 7,5 V DC through potential routing
Inputs: 4 analog inputs, differencial inputs with shield 1 heating current input (50 mA) Outputs: 8 digital outputs, each 70mA, 24 V DC
CD VAR-IO RTD 6-DO6
ANALOG / DIGITAL I/O-MODUL 6 analog inputs, differencial inputs with
shield Connections of actuators in 2- and 3-wire
technology 8 digital outputs, 24V DC 1 heating current input 14-Bit resulution Types:B, C, D, E, J, K, L, N, R, S, T,W
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 3x status and diagnostics Process data update: max. 175 ms Inputs and outputs optically isolated Measuring ranges and representing formats soft configurable Range for Linear R: 450 Ohm Dimensions: 48,8 x 120 x 71,5 mm (B x H x T)
Power supply: 24 V DC and 7,5 V DC through potential
routing Inputs: 6 analog inputs (2-, 3- wire, shield) 1 heating current input (50 mA) Outputs: 6 digital outputs, each 70mA, 24 V DC
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO UTH 8-DO8
ANALOG / DIGITAL I/O-MODUL 8 analog thermocouple inputs differencial inputs with shield 8 digital outputs, 24V DC 1 heating current input 14-Bit resolution Types:B, C, D, E, J, K, L, N, R, S, T,W
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES LED indicators: 3x status and diagnostics Process data update: max. 225 ms Inputs and outputs optically isolated Measuring ranges and input formats soft configurable Voltage range: 0..70 mV Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 8 analog inputs, differencial inputs with shield 1 heating current input (50 mA) Outputs: 8 digital outputs, each 70mA, 24 V DC
CD VAR-IO CO 2/U
POWER SUPPLY FOR SENSORS 2 analog outputs 2-wire technology with shield 10 V DC, constant voltage
APPLICATIONS I/O module of the CD VAR-IO-system I/O-extension of the modular closed-loop-control-system CD VAR-IO For process automation, extrusion Supply for melt pressure sensors MAIN ATTRIBUTES 1 diagnostic LED Outputs optically isolated 10V DC,max. 2 x 30 mA or 1 x 60 mA Accuracy: 0,3% drift typ. Short circuit proofed Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 2 analog outputs
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO PWR IN/24
CD VAR-IO POWER TERMINAL Supply of the main power 24 V DC Supply of the segment power 24 V DC
APPLICATIONS Supply of 24 V DC for CD VAR-IO-systems with a high number of modules For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Diagnostic LED Dimensions: 12,2 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC
CD VAR-IO T4/RTD
MODULAR CONTROLLER SYSTEM 4 Channel Closed Loop Controller I/O extensible via CD VAR-IO-modules 4 analog inputs for resistance thermometer
and R linear 6 digital outputs, 24V DC Heating current monitoring for all outputs
APPLICATIONS Intelligent closed loop controller module of the CD VAR-IO-system For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Latest control technology with complete functional range for the most varied applications Free wiring of all inputs & outputs Scanning rate adjustable per channel: from 100 ms 2 automatic self-tuning procedures Heating current monitor with compensation of mains voltage variations Separate RS232-interface for BlueControl Engineering Tool Software update in Flash EPROM via the Engineering Tool Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 4 analog inputs, 2- or 3-wire technology and additional srceen 1 heating current input (50 mA) Outputs: 6 digital outputs, each 70mA, 24 V DC Communication: All fieldbusses via CD VAR-IO-buscoupler
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO T4/UTH
MODULAR CONTROLLER SYSTEM 4 Channel Closed Loop Controller I/O extensible via CD VAR-IO-modules 4 analog thermocouple inputs (11 types,
mV) 8 digital outputs, 24V DC Heating current monitoring for all
outputs APPLICATIONS Intelligent closed loop controller module of the CD VAR-IO-system For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Latest control technology with complete functional range for the most varied applications Free wiring of all inputs & outputs Scanning rate adjustable per channel: from 100 ms 2 automatic self-tuning procedures Heating current monitor with compensation of mains voltage variations Separate RS232-interface for BlueControl Engineering Tool Software update in Flash EPROM via the Engineering Tool Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 4 analog inputs, differencial inputs with shield 1 heating current input (50 mA) Outputs: 8 digital outputs, each 70mA, 24 V DC Communication: All fieldbusses via CD VAR-IO-buscoupler
CD VAR-IO T6/RTD
MODULAR CONTROLLER SYSTEM 6 Channel Closed Loop Controller Extensible via any CD VAR-IO-I/O-modul
up to 30 control loops 6 analog inputs for resistance thermometer
and R linear 6 digital outputs, 24V DC Heating current monitoring for all outputs
APPLICATIONS Intelligent closed loop controller module of the CD VAR-IO-system For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Latest control technology with complete functional range for the most varied applications Free wiring of all inputs & outputs Scanning rate adjustable per channel: from 100 ms 2 automatic self-tuning procedures Heating current monitor with compensation of mains voltage variations Separate RS232-interface for BlueControl Engineering Tool Software update in Flash EPROM via the Engineering Tool Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 6 analog inputs, 2- or 3-wire technology and additional srceen 1 heating current input (50 mA) Outputs: 6 digital outputs, each 70mA, 24 V DC Communication: All fieldbusses via CD VAR-IO-buscoupler
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
CD VAR-IO T8/UTH
MODULAR CONTROLLER SYSTEM 8 Channel Closed Loop Controller Extensible via any CD VAR-IO-I/O-modul
up to 30 control loops 8 analog thermocouple inputs (11
different types, mV) 8 digital outputs, 24V DC Heating current monitoring for all
outputs APPLICATIONS Intelligent closed loop controller module of the CD VAR-IO-system For process automation, machinery automation, installations, factory automation MAIN ATTRIBUTES Latest control technology with complete functional range for the most varied applications Free wiring of all inputs & outputs Scanning rate adjustable per channel: from 100 ms 2 automatic self-tuning procedures Heating current monitor with compensation of mains voltage variations Separate RS232-interface for BlueControl Engineering Tool Software update in Flash EPROM via the Engineering Tool Dimensions: 48,8 x 120 x 71,5 mm (B x H x T) Power supply: 24 V DC and 7,5 V DC through potential routing Inputs: 8 analog inputs, differencial inputs with shield 1 heating current input (50 mA) Outputs: 8 digital outputs, each 70mA, 24 V DC Communication: All fieldbusses via CD VAR-IO-buscoupler
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
TECHN. SYSTEM GENERAL Number of devices in an CD VAR-io-station 63, maximum Maximum current carrying capacity of the voltage jumpers:
8 A for 24 V DC Main- and segment circuit
0,5 A for power supply of analog circuits
AMBIENT CONDITIONS Regulations Developed according to VDE 0160, UL 508 Permissible Temperatures Ambient temperature (operation): -25...55 °C Ambient temperature (storage/transport): -25...85 °C Maximum permissible temperature inside the terminal during operation: 85 °C Humidity Humidity (operation): 75 % on average; 85 % occasionally; no condensation Humidity (storage/transport) 75%, on average; 85%, occasionally; no condensation Air pressure Air pressure (operation): 80 kPa to 106 kPa (up to 2000 m [6562 ft.] above sea level) Air pressure (storage/transport): 70 kPa to 106 kPa (up to 3000 m [9843 ft.] above sea level) Protection modes Degree of protection according to DIN 40050, IEC 60529 IP 20 Protection class Degree of protection according to DIN 57106-1 Class 3 Air and creepage distances Air and creepage distances According to IEC 60644/IEC 60664A/ DIN VDE 0110: 1989-01 and DIN VDE 0160: 1988-05 Housing material Plastic, PVC-free, PA6.6, self-extinguishing (V0) Degree of pollution according to EN 50178 2; condensation not permissible in operation Environmental compatibility Not resistant to chloroform Gases that may endanger functions according to DIN 40046-36, DIN 40046-37 Sulfur dioxide (SO2) Concentration 10 ± 0.3 ppm Ambient conditions
– Temperature: 25°C (77°F) (± 2°C) – Humidity: 75% (± 5%) – Test duration: 10 days Hydrogen sulfide (H2S) Concentration 1 ± 0.3 ppm Ambient conditions – Temperature: 25°C (77°F) (± 2°C) – Humidity: 75% (± 5%) – Test duration: 4 days Resistance of the housing material to termites resistant material to fungi resistant MECHANICAL DEMANDS Vibration test sinusoidal vibrations according to IEC 60068-2-6; EN 60068-2-6 5g load, 2 hours for each space direction Shock test according to IEC 60068-2-27; EN 60068-2-27 25g load for 11 ms, half sinusoidal wave, three shocks in each space direction and orientation Broadband noise according to IEC 60068-2-64; EN 60068-2-64 0.78g load, 2.5 hours for each space direction CONFORMANCE WITH EMC DIRECTIVE 89/336/EEC This table provides standard data. For different values, please refer to the terminal-specific data sheets. Noise Immunity Test according to EN 50082-2 Electrostatic discharge (ESD) according To EN 61000-4-2 / IEC 61000-4-2 – Criterion B – 6 kV contact discharge – 8 kV air discharge Electromagnetic fields according EN 61000-4-3, IEC 61000-4-3 – Criterion A – Field strength: 10 V/m
Fast transients (burst) according EN 61000-4-4 / IEC 61000-4-4 – Criterion B – Remote bus: 2 kV – Voltage supply 2 kV – I/O cables: 2 kV – Criterion A – All interfaces: 1 kV
Surge voltage according EN 61000-4-5/ IEC 61000-4-5 – Criterion B – AC supply lines: 2.0 kV/4.0 kV (symmetrical/asymmetrical) – DC supply lines: 0.5 kV/0.5 kV (symmetrical/asymmetrical) CD VAR-IO survey
– Signal lines: 1.0 kV/2.0 kV (symmetrical/asymmetrical) Conducted interference according EN 61000-4-6, IEC 61000-4-6 – Criterion A – Test voltage 10 V Noise Emission Test According to EN 50081-2 Noise emission of housing: EN 55011 Class A POWER SUPPLY 24 V Supply of the Bus Terminal Nominal voltage: 24 V DC Ripple: ± 5 % Permissible voltage range: 19,2 V DC to 30,0 V DC, ripple included Connection Spring-clamp terminals 7.5 V Bus Logic Supply (UL) Nominal voltage: 7,5 V ripple: ± 5 % Load current: 2 A, maximum Connection Voltage jumpers on the sides Remark: Voltage is produced in the bus terminal by a DC/DC converter from the 24 V supply voltage. UL is not electrically isolated from the 24 V bus terminal voltage. UL is not electrically isolated from the I/O voltages UM and US. Communications power UL is electronically short-circuit protected. Supply of Terminals for Analog Signals (UANA) Nominal voltage: 24 V DC Tolerance : - 15 % / + 20 % Ripple: ± 5 % Permissible voltage range: 19,2 V DC to 30,0 V DC, ripple included Load current: 500 mA, maximum Connection Voltage jumpers on the sides Remark: Isolation of the 24 V input voltage by means of a diode. Smoothing through _—filter; corner frequency: 9.8 kHz and attenuation of 40 dB/decade. UANA is not electrically isolated from the 24V bus terminal supply and the 7.5 V communications power. Supply of Terminals for Digital Signals (UM, US) in the 24 V Area Nominal voltage: 24 V DC Tolerance : - 15 % / + 20 % Ripple: ± 5 % Permissible voltage range: 19,2 V DC to 30,0 V DC, ripple included Load current: 8 A, maximum Connection Voltage jumpers on the sides
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
Remark Segment circuit US All digital outputs and initiator supplies without individual short-circuit protection are connected to the segment circuit US. Main circuit UM Initiator supplies with individual short-circuit protection are connected to the main circuit UM. Voltage Dips and Interruptions to the I/O Supply Intensity PS1: Interruption time < 1 ms Time interval between voltage dips < 1 s Behavior: Evaluation criterion 1. A < 1 ms supply voltage dip is not registered by the bus. Intensity PS2: Interruption time < 10ms Time interval between voltage dips < 1 s Behavior: Evaluation criterion 3. Bus disconnection; all outputs of the system are reset..
AIR AND CREEPAGE DISTANCES (ACCORDING TO EN 50178, VDE 0109, VDE 0110) Isolating Distance: – Incoming bus / bus logic – Outgoing bus / bus logic – Incoming bus / outgoing bus – Bus logic / I/O Air distance: 0,3 mm Creepage distance: 0,3 mm Impulse Voltage Withstand Level: 0,5 kV TEST VOLTAGES The following isolating distances are tested by 500 V AC test voltage, 50 Hz, 1 min 5 V supply incoming remote bus / 5 V supply of outgoing remote bus 5 V supply incoming remote bus/ 7.5 V communications power, 24 V bus terminal supply
5 V supply incoming remote bus/ 24 V main supply, 24 V segment supply 5 V supply incoming remote bus/ functional earth ground 5 V supply outgoing remote bus/ 7.5 V communications power, 24 V bus terminal supply 5 V supply outgoing remote bus/ 24 V main supply, 24 V segment supply 5 V supply outgoing remote bus/ functional earth ground 7.5 V communications power, 24 V bus terminal supply/ functional earth ground 7.5 V communications power, 24 V bus terminal supply/ 24 V main supply, 24 V segment supply 24 V main supply, 24 V segment supply/ functional earth ground
Ordering CODE
Fieldbus Buscoupler
CD VARIO BK DP/V1 KS VC-101-00111 CD vario buscoupler Profibus, Profibus-DP with DP/V1 extension, 24V DC, spring- clamp connection, labeling field
CD VARIO BK CAN KS VC-101-00121 CDvario buscoupler CANopen, 24 V DC, spring-clamp connection, labeling field
CD VARIO BK ETH KS VC-101-00131 CDvario buscoupler ETHERNET, 24 V DC, spring-clamp connection, labeling field
CD VARIO BK IP KS VC-101-00181 CDvario buscoupler ETHERNET IP, 24 V DC, spring-clamp connection, labeling field
CD VARIO BK DN KS VC-101-00141 CDvario buscoupler DeviceNet, 24 V DC, spring-clamp connection, labeling field
CD VARIO BK MOD KS VC-101-00151 CDvario buscoupler Modbus RTU, 24 V DC, spring-clamp connection, labeling field
Moduli di termoregolazione
CD VARIO T4/RTD KS VC-104-00331
Vario-temperatur-controller, 4-channel, spring-clamp connection, labeling field, 4 inputs, RTD (resistance element), 3 wire connection + shield, 6 outputs 24 V DC, 1 heating current input, I/O extensible
CD VARIO T4/UTH KS VC-104-00431 Vario-temperatur-controller, 4-channel, spring-clamp connection, labeling field, 4 inputs, TC (thermocouples), 2 wire connection + shield, 8 outputs 24 V DC, 1 heating current input, I/O extensible
CD VARIO T6/RTD KS VC-104-00341 Vario-temperatur-controller, until 30-channel, spring-clamp connection, labeling field, 6 inputs, RTD (resistance element), 3 wire connection + shield, 6 outputs 24 V DC, 1 heating current input, I/O extensible until 30 channels
CD VARIO T8/UTH KS VC-104-00441 Vario-temperatur-controller, until 30-channel, spring-clamp connection, labeling field, 8 inputs, TC (thermocouples), 2 wire connection + shield, 8 outputs 24 V DC, 1 heating current input, I/O extensible until 30 channels
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com
Estensione ai moduli di regolazione
VARIO UTH 4-DO8 KSVC-103-00431 Vario-I/O-module, spring-clamp connection, labeling field, 4 inputs, TC (thermocouples), 2 wire connection + shield, 8 outputs 24 V DC, 1 heating current input
VARIO RTD 6-DO6 KSVC-103-00341 Vario-I/O-module, spring-clamp connection, labeling field, 6 inputs, RTD (resistance element), 3 wire connection + shield, 6 outputs 24 V DC, 1 heating current input
VARIO UTH 8-DO8 KSVC-103-00441 Vario-I/O-module, spring-clamp connection, labeling field, 8 inputs, TC (thermocouples), 2 wire connection + shield, 8 outputs 24 V DC, 1 heating current input
Digital Inputs
VARIO DI 2/24 KSVC-102-00121 Vario digital input module, terminal block for spring-clamp connection, labeling field, 2 inputs, 24 V DC, 4-wire connection
VARIO DI 4/24 KSVC-102-00131 Vario digital input module, terminal block for spring-clamp connection, labeling field, 4 inputs, 24 V DC, 3-wire connection
VARIO DI 8/24 KSVC-102-00141 Vario digital input module, terminal block for spring-clamp connection, labeling field, 8 inputs, 24 V DC, 4-wire connection
VARIO DI 16/24 KSVC-102-00151 Vario digital input module, terminal block for spring-clamp connection, labeling field, 16 inputs, 24 V DC, 4-wire connection
Digital outputs
VARIO DO 2/24 KSVC-102-00221 Vario digital output module, terminal block for spring-clamp connection, labeling field, 2 outputs, 24 V DC, 500 mA, 4-wire connection
VARIO DO 4/24 KSVC-102-00231 Vario digital output module, terminal block for spring-clamp connection, labeling field, 4 outputs, 24 V DC, 500 mA, 3-wire connection
VARIO DO 8/24 KSVC-102-00241 Vario digital output module, terminal block for spring-clamp connection, labeling field, 8 outputs, 24 V DC, 500 mA, 4-wire connection
VARIO DO 16/24 KSVC-102-00251 Vario digital output module, terminal block for spring-clamp connection, labeling field, 16 outputs, 24 V DC, 500 mA, 3-wire connection
Analog Inputs
VARIO AI 2/SF KSVC-103-00121 Vario analog input module, terminal block for spring-clamp connection, labeling field, 2 inputs, 0-20 mA, 4-20 mA, ±20 mA, 0- 10 V, ±10 V, 2-wire connection
VARIO AI 8/SF KSVC-103-00141 Vario analog input module, terminal block for spring-clamp connection, labeling field, 8 inputs, 0-20 mA, 4-20 mA, ±20 mA, 0-10 V, ±10 V, (additional 0-40 mA, ±40 mA, 0-5 V, ±5 V, 0-25 V, ±25 V, 0- 50 V), 2-wire connection
VARIO RTD 2 KSVC-103-00321 Vario analog input module, terminal block for spring-clamp connection, labeling field, 2 inputs, RTD (resistance element), 2-, 3-, 4-wire connection
VARIO UTH 2 KSVC-103-00421 Vario analog input module, terminal block for spring-clamp connection, labeling field, 2 inputs, TC (thermocouples), 2-wire connection
Analog Outputs
VARIO AO 1/SF KSVC-103-00211 Vario-analog output module, terminal block for spring-clamp connection, labeling field, 1 output 0- 20mA, 4-20 mA, 0-10 V, 2-wire connection
VARIO AO 2/U/BP KSVC-103-00221 Vario-analog output module, terminal block for spring-clamp connection, labeling field, 2 outputs 0- 10 V, ±10 V, 2-wire connection
Supply Module
VARIO PWR IN/24 KSVC-105-00001 Vario segment circuit supply module, spring-clamp connection, labeling field, 24V DC, without fuse
CD Automation srl Via Picasso, 34/36 - 20025 Legnano (MI) – Italy Tel: +39 0331 577479 Fax: +39 0331 579479
For all the complete documentation, software tools, visit our website www.cdautomation.com