Bild 1

Content cover set 2 book covers, 1 flexible spine, two book screws consisting of bolt head, tapped bush and four washers, two sheets of interleaf paper, two sheets of end paper. Content paper set 20 sheets of paper 22 sheets of interleaf paper. Picture 2

Push the tapped bushes from the outside to the inside through the holes of the back cover.

Picture 3

Now fold the book cover – at first at the outer, than at the inner fold – to the right. Now, the tapped bushes will be standing upright. Picture 4

Push the round holes of the flexible spine on the tapped bushes.

Picture 5

Adjust the book block and push it on the tapped bushes Picture 6

Fold the flexible spine to the inside Picture 7

Push the front cover on the tapped bushes; tighten the bolt heads just slightly.

Picture 8

Completed