energy and its transformation
TRANSCRIPT
Energy and its transformation
Index
1 Energy sources.-1.1 Electricity
2 Electric powers plants.-2.1 Conventional power plants.-2.2 Non-conventional power plants.
3 Environmental impact.
1 Energy sources
Energy sources are natural resources from which different forms of energy are obtained.
We can clasify energy sources in several ways:-by availity in nature: renewable or non-renewable.-by origin:primary or secundari.-by use: conventional or mom-conventional.-by enviroment impact: clear or polluting.
1.1 Electricity
Electricity is the most widely used form of energy in industrialised societies for two seasons:Its capacity to be easily transformed into other forms of energy.
The possibility of transporting it long distances at a low cost.
2 Electricity power plants
The turbine: converts mechanical energy into the rotating movement of a shat.
The alternador is connected to the turbine shaft. As the shaft moves, it produces alternating electrical current
Electrical power plants use an external source of energy produce electricity. To do this, they rely on a turbine-alternador system.
The alternador is connected to the turbine shaft. As the shaft moves, it produces alternating electrical current
The turbine: converts mechanical energy into the rotating movement of a shat.
2.1 Conventional power plants
The thermal power plants, water is heated in a bolier by the heat generated from the combustion of a fossil fuel.
The stean that is generated moves the turbine connected to the generator.
The combustion gases from the first cycle are transporte to another boiler, where they transfer their energy.
Combined cycle power plants obtain electricity as the result of two combined cycle: that uses air and gas, and a conventional thermal cycle. During the first cycle, a gas turbin is used that incloudes a compresor.
Nuclear power plants used a nuclear fission reactor that produce heat to generate the pressurised stean needed to moved the turbine rotor.
Hydroelectric power plants use the potential energy provided by the height of the water stored in a dam, converting in into kinetic energy. This energy moves the blades of the turbin. There are two tipes: gravity and pump.
2.2 Non-conventional power plants
Wind farms use the kinetic energy of the wind to move the blades of a rotor at the top of a tower; this is referred to as a wind turbine.
The enviromental problems caused by conventional power plants have led to the creation and development of non-conventional or alternative energy power plants.
Solar power plants use the Sun's energy. There are two types: Photo thermal power plants and Photovoltaic power plants.
Geothermal power plants use the heat found at deep layers in the Earth.
Biomass consists of all organic compounds that are produced through natural processes.
3 environmental impact
The exploitation of fossil fuels and nuclear energy leads to the depletion of resources. Furthermore, fuel extraction processes are sometimes harmful to the environment Petroleum is transported by means of oil pipelines and oil tankers both can have accidents which means the risk of a spill.