endothermic gas generators - almorwildbarfield.com
TRANSCRIPT
ENDOTHERMIC GAS GENERATORS
The Wild Barfield/Wellman range of endothermic gas generators are based on a robust well proven design, complemented by modern materials of construction and advanced process controls. Generators can be gas or electrically heated and are available for outputs of 15m3/hr to 180 m3/hr. The generators are modular in construction and are fitted with an automatic turn down system.
Design Features: • Output 15m3/hr to 180m3/hr • Modular construction for up rating to higher
capacity • Electrically or Gas heated • Multi-tube catalyst retorts for optimum ‘cracking’
(EN120 – EN180) • Better than 5:1 automatic turn down • Natural convection air cooling (no water or
electric) • Fully automatic operation • PLC control with HMI for control and datalogging • Range of gas quality control devices (dewpoint,
CO2) • Conforms to BS EN 746:3
ENDOTHERMIC GAS GENERATOR SIZES
MODEL
MAXIMUM
CAPACITY
M3/HR
MINIMUM
CAPACITY
M3/HR
NUMBER
OF
RETORTS
HEATING
ENERGY
kW
REACTION
ENERGY
kW
EN15-G 15 5 1 45 (1) 32(3)
EN60-E/G 60 12 1 30 (2) 130(3)
EN120-E/G 120 24 2 60(2) 260(3)
EN180-E/G 180 36 3 90(2) 390(3)
(1) Gross energy input - natural gas (39MJ/M3)
(2) Energy input - electric
(3) Natural gas (39MJ/M3) reaction energy at maximum capacity
Almor Limited, Daleside Road, Nottingham NG2 3GJ, UK : +44 (0)115 986 8773
[email protected] www.almorgroup.com
Units 7 – 11 Hale Trading Estate Lower Church Lane
Tipton, DY4 7PQ, UK +44 (0) 121 522 2522
Unit 4 Orchard Court Nunn Brook Road Huthwaite NG17 2HU, UK +44 (0) 1623 555230
Complete Solution
ALMOR can provide a complete turn key solution, including site installation, commissioning and training. Companion equipment includes tempering furnaces, cleaning plants, quench tanks and endogas generators.
After Sales Support
ALMOR provide complete after sales spares and service support. Spares include heating elements, nickel chrome retorts and work support systems.
ENDOTHERMIC GAS GENERATORS