encoder wdg 63q - farnell element14 · 2013. 11. 19. · k3 radial, shield not connected • l2...
TRANSCRIPT
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -1-
Encoder WDG 63Qwww.wachendorff-automation.com/wdg63q
Wachendorff Automation... systems and encoders• Complete systems• Industrial rugged encoders to suit your application• Standard range and customer versions• Maximum permissible loads• 48-hour express production• Made in Germany• Worldwide distributor network
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -2-
Encoder WDG 63Q• 3/8’’ stainless steel shaft• Up to 25000 PPR by use of high grad electronics• Protection to IP67, shaft sealed to IP65• Full connection protection with 10 VDC up to 30 VDC• With light reserve warning• Optional: -40 °C up to +80 °C [-40 °F à +176 °F],
Protection to IP67 all around
www.wachendorff-automation.com/wdg63q
ResolutionMax. pulses per revolutionPPR
up to 25000 PPR
Mechanical DataHousingFlange clamping flangeFlange material aluminiumHousing cap aluminium, powder coatedHousing Ø 63.5 mm, Ø 2.5 in
Shaft(s)Shaft material stainless steelStarting torque approx. 1 Ncm at ambient
temperature, approx. 1.416 in-ozf atambient temperature
Shaft Ø 9.525 mm, Ø 3/8"Shaft length L: 22.2 mm, L: 0.874"Max. Permissible shaftloading radial
220 N, 22.434 kp
Max. Permissible shaftloading axial
120 N, 12.237 kp
BearingsBearings type 2 precision ball bearingsNominale service life 1 x 10'9 revs. at 100 % rated shaft
load1 x 10'10 revs. at 40 % rated shaftload1 x 10'11 revs. at 20 % rated shaftload
Max. operating speed 8000 rpm
Machinery Directive: basic data safety integrity levelMTTFd 200 aMission time (TM) 25 aNominale service life (L10h) 1 x 10'11 revs. at 20 % rated shaft
load and 8000 rpmDiagnostic coverage (DC) 0 %
Electrical DataPower supply/Currentconsumption
4,75 VDC up to 5,5 VDC: max. 100mA5 VDC up to 30 VDC: max. 70 mA10 VDC up to 30 VDC: max. 100 mA
Output circuit TTLTTL, RS422 compatible, inv.HTLHTL, inv.1 Vpp sin/cos
Pulse frequency TTL ≤ 5000 ppr: max. 200 kHzHTL ≤ 5000 ppr: max. 200 kHzTTL more than 5000 ppr: max. 2 MHzHTL more than 5000 ppr: max. 600kHz1 Vpp sin/cos: max. 100 kHz
Channels ABABNand inverted signals1 Vpp Sin/Cos
Load max. 40 mA / channel@ 1 Vpp sin/cos: min. 120 Ohm
Circuit protection circuit type F24, G24, H24, I24, P24,R24 only
AccuracyPhase offset 90° ± max. 7.5 % of the pulse lengthpulse-/pause-ratio 50 % ± max. 7 %
General DataWeight approx. 300 g, approx. 9.877 ozConnections cable or connector outletProtection rating (EN 60529) IP67, shaft sealed to IP65Operating temperature -20 °C up to +80 °C, -4 °F up to
+176 °F1 Vpp: -10 °C up to +70 °C, -14 °F upto +158 °F
Storage temperature -30 °C up to +80 °C, -22 °F up to+176 °F
More InformationGeneral technical datahttp://www.wachendorff-automation.com/gtdOptionshttp://www.wachendorff-automation.com/acc
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -3-
Cable connection K2, K3, L2, L3 with 2 m cable
Description ABN inv. poss.K2 axial, shield not connected •
K3 radial, shield not connected •
L2 axial, shield connected to encoder housing •
L3 radial, shield connected to encoder housing •
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.Shield
K2, K3,L2, L3
G05, G24
WHBNGNYEGYPK
---
flex
K2, L2,K3, L3
F05, H05,F24, H24,
H30
WHBNGNYEGY-
---
flex
K2, L2,K3, L3
I05, I24,524
WHBNGNYEGYPK
RDBKVTflex
K2, L2,K3, L3
P05, R05,P24, R24,245, 645,
R30WHBNGNYEGY-
RDBKVTflex
K2, L2,K3, L3
SIN
WHBNGNGY--
YEPK-
flex
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -4-
Connector (M16x0.75) SI, SH, 5-, 6-, 8-, 12-pin
Description ABN inv. poss.SI5 axial, 5-pin, Connector connected to encoder housing -
SH5 radial, 5-pin, Connector connected to encoder housing -
SI6 axial, 6-pin, Connector connected to encoder housing -
SH6 radial, 6-pin, Connector connected to encoder housing -
SI8 axial, 8-pin, Connector connected to encoder housing •
SH8 radial, 8-pin, Connector connected to encoder housing •
SI12 axial, 12-pin, Connector connected to encoder housing •
SH12 radial, 12-pin, Connector connected to encoder housing •
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.
Shield
SI5, SH5
5-pin
F05, H05,F24, H24,
H30
12345-
----
-
SI6, SH6
6-pin
G05, G24
612435
----
-
SI6, SH6
6-pin
F05, H05,F24, H24,
H30
61243-
---5
-
SI8, SH8
8-pin
F05, H05,F24, H24,
H30
12345-
---
6, 7, 8
-
SI8, SH8
8-pin
P05,R05,P24,R24,
R30, 245,64512345-
678-
-
SI8, SH8
8-pin
SIN
1234--
67-
5, 8
-
SI12,SH1212-pin
G05, G24
K, LM, B
EHCG
---
A, D, F, J
-
SI12,SH1212-pin
F05, H05,F24, H24,
H30
K, LM, B
EHC-
---
A, D, F,G, J
-
SI12,SH1212-pin
I05, I24,524
K, LM, B
EHCG
FADJ
-
SI12,SH1212-pin
P05,R05,P24,
R24, 245,645, R30
K, LM, B
EHC-
FAD
G, J
-
SI12,SH1212-pin
SIN
K, LM, B
EH--
FA-
D, G, J
-
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -5-
Connector (M16x0.75) S2, S3, 7-pin
Description ABN inv. poss.S2 axial, 7-pin, Connector connected to encoder housing -
S3 radial, 7-pin, Connector connected to encoder housing -
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.Shield
S2, S37-pin
G05, G24
123456
---7-
S2, S37-pin
F05, H05,F24, H24,
H3012345-
---
6, 7-
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -6-
Connector (M23) S4, S5, 12-pin
Description ABN inv. poss.S4 axial, 12-pin, Connector connected to encoder housing •
S5 radial, 12-pin, Connector connected to encoder housing •
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.
Shield
S4, S512-pin
G05, G24
101258311
---
1, 2, 4, 6,7, 9
-
S4, S512-pin
F05, H05,F24, H24,
H30
1012583-
---
1, 2, 4, 6,7, 9, 11
-
S4, S512-pin
I05, I24,524
101258311
614
2, 7, 9
-
S4, S512-pin
P05, R05,P24, R24,245, 645,
R301012583-
614
2, 7, 9, 11
-
S4, S512-pin
SIN
101258--
61-
2, 3, 4, 7,9, 11
-
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -7-
Connector (M23) S4R, S5R, 12-pin (clockwise)
Description ABN inv. poss.S4R axial, 12-pin, Connector connected to encoder housing •
S5R radial, 12-pin, Connector connected to encoder housing •
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.
Shield
S4R, S5R12-pin
G05, G24
101258311
---
1, 2, 4, 6,7, 9
-
S4R, S5R12-pin
F05, H05,F24, H24,
H30
1012583-
---
1, 2, 4, 6,7, 9, 11
-
S4R, S5R12-pin
I05, I24,524
101258311
614
2, 7, 9
-
S4R, S5R12-pin
P05, R05,P24, R24,245, 645,
R301012583-
614
2, 7, 9, 11
-
S4R, S5R12-pin
SIN
101258--
61-
2, 3, 4, 7,9, 11
-
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -8-
MIL-connector S6, 6-pin
Description ABN inv. poss.S6 radial, 6-pin, -
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.Shield
S66-pin
G05, G24
AFCBDE
-----
S66-pin
F05, H05,F24, H24,
H30AFCBD-
---E-
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -9-
Valve-connector S7, 4-pin
Description ABN inv. poss.S7 axial, 4-pin, Connector connected to encoder housing -
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.Shield
S74-pin
F05, H05,F24, H24,
H301234--
-----
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -10-
Sensor-connector (M12x1) SB, SC, 4-, 5-, 8-, 12-pin
Description ABN inv. poss.SB4 axial, 4-pin, Connector connected to encoder housing -
SC4 radial, 4-pin, Connector connected to encoder housing -
SB5 axial, 5-pin, Connector connected to encoder housing -
SC5 radial, 5-pin, Connector connected to encoder housing -
SB8 axial, 8-pin, Connector connected to encoder housing •
SC8 radial, 8-pin, Connector connected to encoder housing •
SB12 axial, 12-pin, Connector connected to encoder housing •
SC12 radial, 12-pin, Connector connected to encoder housing •
Assignments
Circuit
GND+UBABNLight reservewarningA inv.B inv.N inv.n. c.
Shield
SB4, SC4
4-pin
F05, H05,F24, H24,
H30
3124--
----
-
SB5, SC5
5-pin
F05, H05,F24, H24,
H30
31425-
----
-
SB8, SC8
8-pin
F05, H05,F24, H24,
H30
12345-
---
6, 7, 8
-
SB8, SC8
8-pin
P05, R05,P24, R24,R30, 245,
64512345-
678-
-
SB8, SC8
8-pin
SIN
1235--
46-
7, 8
-
SB12,SC1212-pin
G05, G24
314685
---
2, 7, 9,10, 11, 12
-
SB12,SC1212-pin
F05, H05,F24, H24,
H30
31468-
---
2, 5, 7, 9,10, 11, 12
-
SB12,SC1212-pin
I05, I24,524
314685
9710
2, 11, 12
-
SB12,SC1212-pin
P05, R05,P24, R24,245, 645,
R3031468-
9710
2, 5, 11,12-
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -11-
Options
Low temperature Order keyThe encoder WDG 63Q with the output circuit types F24, G24, H24, I24, P24, R24, F05,G05, I05, P05, 645 is also available with the extended temperature range -40 °C up to+80 °C [-40 °F up to +176 °F] (measured at the flange).
ACA
Cable length Order keyThe encoder WDG 63Q can be supplied with more than 2 m cable. The maximum cablelength depends on the supply voltage and the frequency; see www.wachendorff-automation.com/atdPlease extend the standard order code with a three figure number, specifying the cablelength in decimetres.Example: 3 m cable = 030
XXX = Decimeter
IP67 Shafts sealed to IP67 (not for 1 Vss Sin/Cos) Order keyThe encoder WDG 63Q can be supplied in a full IP67 version.
Max. RPM: 3500 rpmPermitted Shaft-Loading, axial: 100 N, 10.197 kpPermitted Shaft-Loading, radial: 110 N, 11.217 kpMax. PPR: 2500 pprStarting-torque: approx. 4 Ncm at ambient temperature, approx. 5.6645 in-ozf at ambienttemperature
AAO
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -12-
Example Order No. Type Your encoderWDG 63Q WDG 63Q WDG 63Q
Pulses per revolution PPR I/U (PPR):5000 2, 5, 10, 15, 20, 24, 25, 30, 36, 40, 48, 50, 60, 64, 72, 87, 90, 100, 120, 125, 127, 128, 150, 160, 180, 200,
216, 236, 240, 250, 254, 256, 300, 314, 320, 360, 400, 500, 512, 571, 600, 625, 720, 750, 768, 800, 810,900, 1000, 1024, 1200, 1250, 1270, 1440, 1500, 1800, 2000, 2048, 2400, 2500, 3000, 3600, 4000, 4096,4685, 5000, 10000, 12500, 20000, 250001 Vss Sin/Cos only 1024, 2048Other PPRs on request
Channels:ABN AB, ABN (SIN: AB)
Output circuit
G24
ResolutionPPR
Power supplyVDC
Output circuit Light reservewarning
Order key
up to 25005 - 30 HTL - H305 - 30 HTL inverted - R30
up to 5000
4.75 - 5.5 TTL • G054.75 - 5.5 TTL - H054.75 - 5.5 TTL, RS422 comp., inverted • I054.75 - 5.5 TTL, RS422 comp., inverted - R0510 - 30 HTL • G2410 - 30 HTL - H2410 - 30 HTL inverted • I2410 - 30 HTL inverted - R2410 - 30 TTL, RS422 comp., inverted • 52410 - 30 TTL, RS422 comp., inverted - 245
10000 up to25000
4.75 - 5.5 TTL - F054.75 - 5.5 TTL, RS422 comp., inverted - P0510 - 30 HTL - F2410 - 30 HTL inverted - P2410 - 30 TTL, RS422 comp., inverted - 645
1024, 2048 4.75 - 5.5 1 Vpp sin/cos - SIN
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -13-
Electrical connections
K2
Description ABN inv. poss. Order keyCable: length (2 m standard, WDG 58T: 1 m)axial, shield not connected • K2axial, shield connected to encoder housing • L2radial, shield not connected • K3radial, shield connected to encoder housing • L3Connector: (shield connected to encoder housing)connector, M16x0.75, 5-pin, axial - SI5connector, M16x0.75, 5-pin, radial - SH5connector, M16x0.75, 6-pin, axial - SI6connector, M16x0.75, 6-pin, radial - SH6connector, M16x0.75, 8-pin, axial • SI8connector, M16x0.75, 8-pin, radial • SH8connector, M16x0.75, 12-pin, axial • SI12connector, M16x0.75, 12-pin, radial • SH12connector, M16x0.75, 7-pin, axial - S2connector, M16x0.75, 7-pin, radial - S3connector, M23, 12-pin, axial • S4connector, clockwise pin count, M23, 12-pin, axial • S4Rconnector, M23, 12-pin, radial • S5connector, clockwise pin count, M23, 12-pin, radial • S5Rconnector, MIL, 6-pin, radial - S6connector, Valve, 4-pin, axial - S7sensor-connector, M12x1, 4-pin, axial - SB4sensor-connector, M12x1, 4-pin, radial - SC4sensor-connector, M12x1, 5-pin, axial - SB5sensor-connector, M12x1, 5-pin, radial - SC5sensor-connector, M12x1, 8-pin, axial • SB8sensor-connector, M12x1, 8-pin, radial • SC8sensor-connector, M12x1, 12-pin, axial • SB12sensor-connector, M12x1, 12-pin, radial • SC12
OptionsDescription Order keyWithout option EmptyLow temperature ACAIP67 AAOCable length XXX = Decimeter
Example Order No.= WDG 63Q 5000 ABN G24 K2 WDG 63Q Your encoder
WDG 63Q Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2013-10-01 -14-
For further information please contact our local distributor.Here you find a list of our distributors worldwide.http://www.wachendorff-automation.com/distributors_worldwide.html
Wachendorff Automation GmbH & Co. KGIndustriestrasse 7 • D-65366 Geisenheim
Phone: +49 67 22 / 99 65 25Fax: +49 67 22 / 99 65 70E-Mail: [email protected]