en 300 086 radio test report - retevis · page 1 of 53 report no.: b-e16049597 en 300 086 radio...

of 53 Report No.: B-E16049597

EN 300 086 RADIO Test REPORT On Behalf of

Zhengzhou Eshow Import and Export Trade Co., Ltd.

Two way radio Model No.: RT-5RV

Prepared for : Zhengzhou Eshow Import and Export Trade Co., Ltd.

Address : Room 722, Sanjiang Building, No. 170, Nanyang Road, Huiji District, Zhengzhou City, Henan, China

Prepared By : Beide (UK) Product Service Limited

Address :6F,BldgE,Hourui3rdIndZone,Xixiang,Bao'anDist,Shenzhen,China

Report Number : B-E16049597

Date of Receipt : Apr. 20, 2016

Date of Test : Apr. 20-26, 2016

Date of Report : Apr. 27, 2016


Contents 1. General Information ............................................................................................................... 5

1.1. Description of Device (EUT) .......................................................................................... 5 1.2. Accessories of device (EUT)........................................................................................... 6 1.3. Test Lab information ....................................................................................................... 6

2. Summary of test ...................................................................................................................... 7 2.1. Test Standard description: ............................................................................................... 7 2.2. Summary of test result .................................................................................................... 7 2.3. Block Diagram of Configuration for test ........................................................................ 8 2.4. Test mode ........................................................................................................................ 8 2.5. Test Conditions ................................................................................................................ 8 2.6. Measurement Uncertainty (95% confidence levels, k=2) ............................................... 9 2.7. Test Equipment ................................................................................................................ 9

3. Frequency Error ................................................................................................................... 11 3.1. Limit .............................................................................................................................. 11 3.2. Test setup ....................................................................................................................... 11 3.3. Test Procedure ............................................................................................................... 11 3.4. Test Result ..................................................................................................................... 12

4. Transmitter Power (Conducted) .......................................................................................... 14 4.1. Limit .............................................................................................................................. 14 4.2. Test Setup ...................................................................................................................... 14 4.3. Test Procedure ............................................................................................................... 14 4.4. Test Result ..................................................................................................................... 15

5. Frequency deviation .............................................................................................................. 17 5.1. Limit .............................................................................................................................. 17 5.2. Test Setup ...................................................................................................................... 17 5.3. Test Procedure ............................................................................................................... 17 5.4. Test Result ..................................................................................................................... 18

6. Adjacent And Alternate Channel Power ............................................................................ 20 6.1. Limit .............................................................................................................................. 20 6.2. Test Setup ...................................................................................................................... 20 6.3. Test Procedure ............................................................................................................... 20 6.4. Test Result ..................................................................................................................... 21

7. Unwanted Emissions In The spurious Domain .................................................................. 23 7.1. Limit .............................................................................................................................. 23 7.2. Test Setup ...................................................................................................................... 23 7.3. Test Procedure ............................................................................................................... 24 7.4. Test Result ..................................................................................................................... 24

8. Maximum Usable Sensitivity (Conducted) ......................................................................... 28 8.1. Limit .............................................................................................................................. 28 8.2. Test Configuration ......................................................................................................... 28 8.3. Test Procedure ............................................................................................................... 28 8.4. Test Results ................................................................................................................... 29

9. Co-channel rejection ............................................................................................................. 30 9.1. Limit .............................................................................................................................. 30 9.2. Test Configuration ......................................................................................................... 30 9.3. Test Procedure ............................................................................................................... 30 9.4. Test Results ................................................................................................................... 31

10. Adjacent channel selectivity ................................................................................................. 32 10.1. Limit .............................................................................................................................. 32 10.2. Test Configuration ......................................................................................................... 32 10.3. Test Procedure ............................................................................................................... 32 10.4. Test Results ................................................................................................................... 33

11. Spurious response rejection ................................................................................................. 35 11.1. Limit .............................................................................................................................. 35 11.2. Test Configuration ......................................................................................................... 35 11.3. Test Procedure ............................................................................................................... 35


11.4. Test Results ................................................................................................................... 36 12. Inter Modulation Response Rejection ................................................................................. 37

12.1. Limit .............................................................................................................................. 37 12.2. Test Configuration ......................................................................................................... 37 12.3. Test Procedure ............................................................................................................... 37 12.4. Test Results ................................................................................................................... 38

13. Blocking Or Desensitization ................................................................................................. 39 13.1. Limit .............................................................................................................................. 39 13.2. Test Configuration ......................................................................................................... 39 13.3. Test Procedure ............................................................................................................... 39 13.4. Test Results ................................................................................................................... 40

14. Receiver Spurious Radiations .............................................................................................. 41 14.1. Limit .............................................................................................................................. 41 14.2. Test Setup ...................................................................................................................... 42 14.3. Test Procedure ............................................................................................................... 42 14.4. Test Result ..................................................................................................................... 43

15. Photos of test setup ................................................................................................................ 45 16. Photos of EUT ....................................................................................................................... 46


RADIO TEST REPORT EN 300 086-1 V1.4.1:2010 EN 300 086-2 V1.3.1:2010

Report Reference No. .............. : B-E16049597 Date of Issue ................................ : Apr. 27, 2016 Testing Laboratory Name ......... : Beide (UK) Product Service Limited Address ........................................ : 6F, Bldg E, Hourui 3rd Ind Zone, Xixiang, Bao'an Dist, Shenzhen, China

Testing Location/ Procedure ........ :

Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □

Applicant’s Name ....................... : Zhengzhou Eshow Import and Export Trade Co., Ltd.

Address ........................................ : Room 722, Sanjiang Building, No. 170, Nanyang Road, Huiji District, Zhengzhou City, Henan, China.

Test Specification Standard ....................................... : EN 300 086-1 V1.4.1:2010, EN 300 086-2 V1.3.1:2010Test Report Form No. .................. : B-E16049597TRF Originator ............................ : Beide (UK) Product Service Limited

Beide (UK) Product Service Limited. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Beide (UK) Product Service Limited. is acknowledged as copyright owner and source of the material.Beide (UK) Product Service Limited. All rights reserved. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.Test Item Description. ............... : Two way radio Trade Mark .................................. : N/A Test Model ................................... : RT-5RV Ratings ....................................... : DC 7.4V

Result ………………………...... : Positive

Compiled by: Supervised by: Approved by:

Jacky Li/ File administrators Glin Lu/ Technique principal Gavin Liang/ Manager


1. General Information 1.1. Description of Device (EUT) EUT Name : Two way radio Model No. : RT-5RV DIFF : Only differ in model number. Trademark : N/A Power supply : DC 7.4V from battery, DC 10V from adapter for charging Radio Technology : PMR Operation frequency : 136MHz-174MHz

400MHz-480MHz Modulation : FM Antenna Type : Integrated Antenna, Maximum Gain is 3dBi Intend use environment : Residential, commercial and light industrial environment Applicant : Zhengzhou Eshow Import and Export Trade Co., Ltd. Address : Room 722, Sanjiang Building, No. 170, Nanyang

Road, Huiji District, Zhengzhou City, Henan, China manufacture : Shenzhen Retevis Technology Co.,Ltd Address : Room 700, 7/F., 13-C, Zhonghaixin Science &Technology Park,

No.12 Ganli 6th Road, Buji Street, Longgang District, Shenzhen, China


1.2. Accessories of device (EUT)

Accessories 1 : Adapter

M/N : 480-10050-E.S

Rang : Input: AC 100-240V, 50/60Hz Output: DC 10V, 0.5A

1.3. Test Lab information Testing Laboratory Name : Beide (UK) Product Service LimitedAddress ........................... .: 6F, Bldg E, Hourui 3rd Ind Zone, Xixiang, Bao'an Dist, Shenzhen, China


2. Summary of test 2.1. Test Standard description: EN 300 086-1 V1.4.1:2010: Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 1: Technical characteristics and methods of measurement EN 300 086-2 V1.3.1:2010: Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

2.2. Summary of test result

EN 300 086-1 V1.4.1:2010 Description of test Test Result

§ 7.1 Frequency error Pass

§ 7.2 Transmitter power (conducted) Pass

§ 7.3 Maximum effective radiated power N/A

§ 7.4 Frequency deviation Pass

§ 7.5 Adjacent and alternate channel power Pass

§ 7.6 Unwanted emissions in the spurious domain Pass

§ 7.7 Intermodulation attenuation N/A

§ 8.1 Maximum usable sensitivity (conducted) Pass

§ 8.2 Maximum usable sensitivity (field strength) N/A

§ 8.3 Co-channel rejection Pass

§ 8.4 Adjacent channel selectivity Pass

§ 8.5 Spurious response rejection Pass

§ 8.6 Intermodulation response rejection Pass

§ 8.7 Blocking or desensitization Pass

§ 8.8 RX Spurious radiations Pass


2.3. Block Diagram of Configuration for test

2.4. Test mode

The EUT has been tested under typical operating condition. No software used to control

the EUT for staying in transmitting and receiving mode for testing.

The EUT can be with a step of 2.5/5/6.25/10/12.5/25KHz, only 12.5/25KHz step were

evaluated in this report.

Test Mode

All test mode(s) and condition(s) mentioned were considered and evaluated respectively by

performing full tests, the worst data were recorded and reported.

Channel

Spacing Low channel Middle channel High channel

12.5KHz 136MHz/400MHz 155MHz/440MHz 174MHz/480MHz

25KHz 136MHz/400MHz 155MHz/440MHz 174MHz/480MHz

2.5. Test Conditions

Normal Conditions Extreme Conditions

Temperature range 15-35℃ -20 and 55℃ ℃

Humidity range 20-75% 20-75%

Pressure range 86-106kPa 86-106kPa

Power supply DC7.4V 7.40V and 6.29V ( declared by the manufacturer. )

Note 1: The test procedure described in clause 5.1.1 of EN300 086-1 was used for extreme test procedure.

2: The Extreme Temperature and Extreme Voltages declared by the manufacturer.

EUT


2.6. Measurement Uncertainty (95% confidence levels, k=2)

Item MU Remark

Uncertainty for Conducted Emission Test 2.70dB

Uncertainty for Radiation Emission test in 3m chamber(30MHz to 1GHz)

3.90 dB Polarize: V 3.92dB Polarize: H

Uncertainty for Radiation Emission test in 3m chamber(1GHz to 25GHz)

253dB Polarize: H 4.28dB Polarize: V

Uncertainty for conducted RF Power 0.16dB

2.7. Test Equipment

Equipment Manufacture Model No. Serial No. Last cal. Cal Interval

3m Semi-Anechoic CHENYU N/A N/A 2015.01.20 2Year

Spectrum analyzer Agilent E4407B MY46185649 2016.01.19 1Year

Receiver R&S ESPI 101873 2016.01.21 1Year

Receiver R&S ESCI 101165 2016.01.19 1Year

Bilog Antenna SCHWARZBECK VULB 9168 VULB9168-438 2016.01.22 2Year

Horn Antenna SCHWARZBECK BBHA 9120 D BBHA 9120 D(1201) 2016.01.21 2Year

Cable Resenberger N/A No.1 2016.01.19 1Year

Cable SCHWARZBECK N/A No.2 2016.01.19 1Year

Cable SCHWARZBECK N/A No.3 2016.01.19 1Year

Pre-amplifier HP HP8347A 2834A00455 2016.03.21 1Year

Pre-amplifier Agilent 8449B 3008A02664 2016.03.21 1Year

vector Signal Generator Agilent N5182A MY49060042 2015.11.18 1 Year

vector Signal Generator Agilent E4438C US44271917 2015.11.18 1 Year

X-series USB Peak and Average

Power Sensor Agilent U2021XA MY54080020 2015.11.18 1 Year








Signal Analyzer Agilent N9020A MY48030494 2015.11.18 1 Year


3. Frequency Error 3.1. Limit EN 300 086-1 Sub-clause 7.1 The frequency error, as defined in EN 300 086-1, shall not exceed the limits in EN 300 086-1, table 2.

3.2. Test setup

3.3. Test Procedure Please refer to EN 300 086-1 Sub-clause 7.1 for the measurement method.

Temperature Chamber

EUT

AC or DC power supply

Spectrum


3.4. Test Result

EUT: Two way radio M/N:RT-5RVTest date:2016-1-25 Pressure: 100.1Kpa Humidity:54% Tested by: Peter Test site: RF site

Low Channel (136.00MHz)

Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Frequency

(MHz)

Frequency

Error

(kHz)

Limit

(kHz)

Normal condition

136.00 12.5 25 7.4 136.0009 0.9 ±1.5 136.00 25 25 7.4 136.0008 0.8 ±2.0

Extreme condition

136.00

12.5

Tmin=-20 Vmax=7.4 136.0008 0.8

±2.5

Tmin =-20 Vmin=6.29 136.0008 0.6 Tmax=55 Vmax=7.4 136.0001 0.1 Tmax =55 Vmin=6.29 136.0008 0.8

25

Tmin=-20 Vmax=7.4 136.0003 0.3 Tmin =-20 Vmin=6.29 136.0004 0.4 Tmax=55 Vmax=7.4 136.0002 0.2 Tmax =55 Vmin=6.29 136.0001 0.1

High Channel(174.00MHz)

Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Frequency

(MHz)

Frequency

Error

(kHz)

Limit

(kHz)

Normal condition

174.00 12.5 25 7.4 174.0004 0.4 ±1.5 174.00 25 25 7.4 174.0009 0.9 ±2.0

Extreme condition

174.00

12.5

Tmin=-20 Vmax=7.4 174.0011 1.1

±2.5


25




Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Frequency

(MHz)

Frequency

Error

(kHz)

Limit

(kHz)

Normal condition

400 12.5 25 7.4 400.0009 0.9 ±1.5 400 25 25 7.4 400.0008 0.8 ±2.0

Extreme condition

400

12.5

Tmin=-20 Vmax=7.4 400.0018 1.8

±2.5


25


High Channel(480.00MHz)

Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Frequency

(MHz)

Frequency

Error

(kHz)

Limit

(kHz)

Normal condition

480 12.5 25 7.4 480.0004 0.4 ±1.5 480 25 25 7.4 480.0009 0.9 ±2.0

Extreme condition

480

12.5

Tmin=-20 Vmax=7.4 480.0011 1.1

±2.5


25



4. Transmitter Power (Conducted) 4.1. Limit

EN 300 086-1 Sub-clause 7.2

The transmitter power (conducted) as defined in EN 300 086-1 Sub-clause 7.2.1 under the specified conditions of measurement and at normal test conditions shall be within ± 1.5 dB of the rated output power. Furthermore, the carrier power (conducted) shall not exceed the maximum value allowed by the Administrations.

The transmitter power (conducted) under extreme test conditions shall be within +2.0dB and -3.0dB of the rated output power.

4.2. Test Setup


Temperature Chamber

EUT

AC or DC power supply

Spectrum


4.4. Test Result

EUT: Two way radio M/N:RT-5RV Test date: 2016-1-25 Pressure: 100.1Kpa Humidity:54% Tested by: Peter Test site: RF site

RF output power (conducted) for Channel 136.00MHz


Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Power

(dBm)

Rated

Power

(dBm)

Limit

(dBm)

136.00 12.5 Tnor=25 7.4 36.7

4W(36dBm)

36±1.5 136.00 25 Tnor=25 7.4 36.4

136.00 12.5

Tmin=-20 7.4 36.4

36 +2/-3

Tmin =-20 6.29 36.8

Tmax=55 7.4 36.2

Tmax=55 6.29 36.8

136.00 25

Tmin=-20 7.4 36.5

Tmin =-20 6.29 36.4

Tmax=55 7.4 36.4

Tmax=55 6.29 36.1

output power (conducted) for Channel 174.00MHz


Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Power

(dBm)

Rated

Power

(dBm)

Limit

(dBm)

174.00 12.5 Tnor=25 7.4 36.5

4W(36dBm)

36±1.5 174.00 25 Tnor=25 7.4 36.4

174.00 12.5

Tmin=-20 7.4 36.7

36 +2/-3

Tmin =-20 6.29 36.2

Tmax=55 7.4 36.5

Tmax=55 6.29 36.6

174.00 25

Tmin=-20 7.4 36.7

Tmin =-20 6.29 36.4

Tmax=55 7.4 36.4

Tmax=55 6.29 36.3


RF output power (conducted) for Channel 400.00MHz


Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Power

(dBm)

Rated

Power

(dBm)

Limit

(dBm)

400.00 12.5 Tnor=25 7.4 36.5

4W(36dBm)

36±1.5 400.00 25 Tnor=25 7.4 36.2

400.00 12.5

Tmin=-20 7.4 36.7

36 +2/-3

Tmin =-20 6.29 36.1

Tmax=55 7.4 36.5

Tmax=55 6.29 36.3

400.00 25

Tmin=-20 7.4 36.5

Tmin =-20 6.29 36.2

Tmax=55 7.4 36.4

Tmax=55 6.29 36.6

output power (conducted) for Channel 480.00MHz


Reference

Frequency

(MHz)

Channel

Separation

(kHz)

Temperature

(℃)

Power

Supplied

(V Dc)

Measured

Power

(dBm)

Rated

Power

(dBm)

Limit

(dBm)

480.00 12.5 Tnor=25 7.4 36.2

4W(36dBm)

36±1.5 480.00 25 Tnor=25 7.4 36.6

480.00 12.5

Tmin=-20 7.4 36.3

36 +2/-3

Tmin =-20 6.29 36.2

Tmax=55 7.4 36.1

Tmax=55 6.29 36.4

480.00 25

Tmin=-20 7.4 36.3

Tmin =-20 6.29 36.2

Tmax=55 7.4 36.6

Tmax=55 6.29 36.5


5. Frequency deviation 5.1. Limit EN 300 086-1 Sub-clause 7.4

)

5.2. Test Setup

5.3. Test Procedure

Please refer to EN 300 086-1 Sub-clause 7.4 for the measurement method.


5.4. Test Result

The Channel @ 25.0 KHz Channel Separation (Worst Case)

Audio Frequency (KHz)

Test Value (KHz)

Limit (KHz)

Audio Frequency(KHz)

Test Value (KHz)

Limit (KHz)

0.10 0.07 5.00 5.50 1.87 4.25 0.20 0.12 5.00 6.00 1.37 4.25 0.30 0.45 5.00 6.00 1.37 1.50 0.40 0.78 5.00 6.50 0.97 1.24 0.50 1.24 5.00 7.00 0.83 1.04 0.60 3.12 5.00 7.50 0.51 0.82 0.70 3.37 5.00 8.00 0.31 0.76 0.80 3.52 5.00 8.50 0.14 0.66 0.90 3.99 5.00 9.00 0.11 0.58 1.00 4.11 5.00 9.50 0.09 0.51 1.20 4.48 5.00 10.00 0.08 0.45 1.40 4.56 5.00 10.50 0.05 0.40 1.60 4.71 5.00 11.00 0.04 0.36 1.80 4.83 5.00 11.50 0.03 0.33 2.00 4.92 5.00 12.00 0.02 0.29 2.20 4.99 5.00 12.50 0.01 0.27 2.40 4.85 5.00 13.00 -- 0.24 2.55 4.79 5.00 14.00 -- 0.20 2.60 4.64 5.00 15.00 -- 0.17 2.80 4.52 5.00 16.00 -- 0.15 3.00 4.25 4.25 17.00 -- 0.13 Limit(3K-6K)=Value measured at 3K 18.00 0.77 3.20 4.11 4.25 19.00 -- 0.10 3.40 3.96 4.25 20.00 -- 0.09 3.60 3.62 4.25 21.00 -- 0.08 3.80 3.42 4.25 22.00 -- 0.07 4.00 3.21 4.25 23.00 -- 0.06 4.50 2.68 4.25 24.00 -- 0.05 5.00 2.31 4.25 25.00 -- 0.05

Deviation of 25.0 KHz Channel Separation

0.00

1.00

2.00

3.00

4.00

5.00

0.10 1.20 2.80 5.50 10.00 15.00 25.00


Dev

iatio

n (K

Hz)


The Channel @ 12.5 KHz Channel Separation (Worst Case)

Audio Frequency

(KHz) Test Value

(KHz) Limit (KHz)

Audio Frequency(KHz)

Test Value (KHz)

Limit (KHz)

0.10 0.04 2.50 5.50 0.82 2.360.20 0.07 2.50 6.00 0.63 2.360.30 0.22 2.50 6.00 0.63 0.75 0.40 0.41 2.50 6.50 0.47 0.70 0.50 0.62 2.50 7.00 0.39 0.66 0.60 1.56 2.50 7.50 0.24 0.61 0.70 1.68 2.50 8.00 0.15 0.57 0.80 1.81 2.50 8.50 0.07 0.52 0.90 1.89 2.50 9.00 0.05 0.47 1.00 2.05 2.50 9.50 0.04 0.43 1.20 2.25 2.50 10.00 0.03 0.38 1.40 2.28 2.50 10.50 0.02 0.33 1.60 2.36 2.50 11.00 0.01 0.29 1.80 2.41 2.50 11.50 -- 0.24 2.00 2.46 2.50 12.00 -- 0.20 2.20 2.49 2.50 12.50 -- 0.15 2.40 2.47 2.50 2.55 2.36 2.36

Limit(2.6K-6K)=Value measured at 2.55K 2.60 2.32 2.36 2.80 2.26 2.36 3.00 2.12 2.36 3.20 2.12 2.36 3.40 1.87 2.36 3.60 1.76 2.36 3.80 1.68 2.36 4.00 1.59 2.36 4.50 1.55 2.36 5.00 1.41 2.36

Deviation of 12.5 KHz Channel Separation

0.00

0.50

1.00

1.50

2.00

2.50

3.00

0.10 1.20 2.80 5.50 10.00


Dev

iatio

n (K

Hz)


6. Adjacent And Alternate Channel Power 6.1. Limit EN 300 086-1 Sub-clause 7.5 For a channel separation of 12,5 kHz, 20 kHz and 25 kHz, the adjacent channel power and alternate channel power shall not exceed a value of 60,0 dB below the transmitter power (conducted) without the need to be below 0,2 μW (-37 dBm)

6.2. Test Setup

6.3. Test Procedure

Please refer to EN 300 086-1 Sub-clause 7.5 for the measurement method.


6.4. Test Result


Low Channel

For Highest Output Power:

Channel

Frequency

(MHz)

Channel

Separation

(kHz)

Adjacent

Channel

(kHz)

Adjacent

Channel

Ratio(dBm)

Limit (dBm)

136.00MHz 12.5 -12.5 -42.7 -37

+12.5 -42.6 -37

136.00MHz 25 -25 -42.3 -37

+25 -42.5 -37

Middle channel2


Channel

Frequency

(MHz)

Channel

Separation

(kHz)

Adjacent

Channel

(kHz)

Adjacent

Channel

Ratio(dBm)

Limit (dBm)

174.00MHz 12.5 -12.5 -42.7 -37

+12.5 -42.5 -37

174.00MHz 25 -25 -42.6 -37

+25 -42.8 -37


Low Channel


Channel

Frequency

(MHz)

Channel

Separation

(kHz)

Adjacent

Channel

(kHz)

Adjacent

Channel

Ratio(dBm)

Limit (dBm)

400.00MHz 12.5 -12.5 -43.1 -37

+12.5 -43.6 -37

400.00MHz 25 -25 -43.3 -37

+25 -43.9 -37

Middle channel2


Channel

Frequency

(MHz)

Channel

Separation

(kHz)

Adjacent

Channel

(kHz)

Adjacent

Channel

Ratio(dBm)

Limit (dBm)

480.00MHz 12.5 -12.5 -43.2 -37

+12.5 -43.7 -37

480.00MHz 25 -25 -43.2 -37

+25 -43.9 -37


7. Unwanted Emissions In The spurious Domain 7.1. Limit EN 300 086-1 Sub-clause 7.6 Spurious emission as defined in EN 300 086-1 Sub-clause 7.6, the power of any spurious emission shall not exceed the values given in following table

Conducted emissions

Frequency Range 9 KHz to 1GHz Above 1GHz to 4GHz, or above 1GHz to 12.75GHz

TX Operating 0.25μW (-36 dBm ) 1.00μW ( -30 dBm )

TX Standby 2.0nW (-57 dBm ) 20.00nW (-47.0 dBm)

Radiated emissions

Frequency Range 30 MHz to 1GHz Above 1GHz to 4GHz or above 1 GHz to 12.75 GHz

TX Operating 0.25μW (-36 dBm ) 1.00μW ( -30 dBm )

TX Standby 2.0nW (-57 dBm ) 20.00nW (-47.0 dBm)

7.2. Test Setup



7.4. Test Result


Test Mode：Lowest Channel, Tx mode, 12.5KHz Channel Spacing

Frequency (MHz)

Antenna polarization

Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -63.58 -36.00 27.58 562.35 V -63.27 -36.00 27.27 806.00 V -65.31 -36.00 29.31

2348.26 V -56.32 -30.00 26.32 2613.66 V -57.92 -30.00 27.92 3145.26 V -54.31 -30.00 24.31

63.53 H -61.32 -36.00 25.32 526.32 H -65.31 -36.00 29.31 806.00 H -61.15 -36.00 25.15

2526.68 H -53.32 -30.00 23.32 Test Mode：Highest Channel, Tx mode, 12.5KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -63.69 -36.00 27.69 562.35 V -61.56 -36.00 25.56 946.00 V -65.32 -36.00 29.32

2348.26 V -59.63 -30.00 29.63 2613.66 V -58.32 -30.00 28.32 3145.26 V -54.32 -30.00 24.32

63.53 H -62.36 -36.00 26.36 526.32 H -61.56 -36.00 25.56 946.00 H -60.31 -36.00 24.31

2526.68 H -56.32 -30.00 26.32


Test Mode：Lowest Channel, Tx mode, 25KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -64.98 -36.00 28.98 562.35 V -63.87 -36.00 27.87 806.00 V -65.98 -36.00 29.98

2348.26 V -58.65 -30.00 28.65 2613.66 V -58.38 -30.00 28.38 3145.26 V -56.43 -30.00 26.43

63.53 H -62.56 -36.00 26.56 526.32 H -66.18 -36.00 30.18 806.00 H -63.57 -36.00 27.57

2526.68 H -55.47 -30.00 25.47 Test Mode：Highest Channel, Tx mode, 25KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -63.76 -36.00 27.76 562.35 V -61.87 -36.00 25.87 946.00 V -66.27 -36.00 30.27

2348.26 V -60.77 -30.00 30.77 2613.66 V -59.26 -30.00 29.26 3145.26 V -56.39 -30.00 26.39

63.53 H -62.59 -36.00 26.59 526.32 H -62.62 -36.00 26.62 946.00 H -62.59 -36.00 26.59

2526.68 H -58.28 -30.00 28.28


Test Mode：Lowest Channel, Standby mode, 12.5KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.36 -57.00 15.36 562.35 V -73.42 -57.00 16.42 589.48 V -71.39 -57.00 14.39

2348.17 V -65.29 -47.00 18.29 2654.67 V -65.28 -47.00 18.28 3187.48 V -67.28 -47.00 20.28

63.53 H -71.32 -57.00 14.32 526.32 H -73.31 -57.00 16.31

1412.49 H -64.15 -47.00 17.15 2544.38 H -66.32 -47.00 19.32

Test Mode：Highest Channel Standby mode, 12.5KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.54 -57.00 15.54 562.35 V -73.29 -57.00 16.29 589.48 V -71.43 -57.00 14.43

2348.17 V -65.56 -47.00 18.56 2654.67 V -65.71 -47.00 18.71 3187.48 V -67.42 -47.00 20.42

63.53 H -71.69 -57.00 14.69 526.32 H -73.53 -57.00 16.53

1412.49 H -64.27 -47.00 17.27 2544.38 H -66.45 -47.00 19.45


Test Mode：Lowest Channel, Standby mode, 25KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.43 -57.00 15.43 562.35 V -73.56 -57.00 16.56 589.48 V -71.08 -57.00 14.08

2348.17 V -65.82 -47.00 18.82 2654.67 V -65.59 -47.00 18.59 3187.48 V -67.47 -47.00 20.47

63.53 H -71.53 -57.00 14.53 526.32 H -73.68 -57.00 16.68

1412.49 H -64.71 -47.00 17.71 2544.38 H -66.67 -47.00 19.67

Test Mode：Highest Channel, Standby mode, 25KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.26 -57.00 15.26 562.35 V -73.58 -57.00 16.58 589.48 V -71.43 -57.00 14.43

2348.17 V -65.77 -47.00 18.77 2654.67 V -65.12 -47.00 18.12 3187.48 V -67.35 -47.00 20.35

63.53 H -71.64 -57.00 14.64 526.32 H -73.28 -57.00 16.28

1412.49 H -64.03 -47.00 17.03 2544.38 H -66.47 -47.00 19.47

Note: All modes of channel spacing have been tested, and only worst data listed.


8. Maximum Usable Sensitivity (Conducted) 8.1. Limit

EN 300 086-1 Sub-clause 8.1.3 The maximum usable sensitivity (conducted) of the receiver as defined as in EN 300 086-1 Sub-clause 8.1.1 shall produce

a) An audio frequency output power of at least 50% of the rated power output, and b) A SND/ND ratio of 20 dB, measured at the receiver output through a telephone

psophometric weighting network as described in ITU-T Recommendation O.41[2] Red Book 1984.

The maximum usable sensitivity shall not exceed an electromotive force (emf) of+6.0 dBuV under normal test conditions, and an emf of +12.0 dBuV under extreme test conditions.

8.2. Test Configuration

8.3. Test Procedure

Please refer to EN 300 086-1 Sub-clause 8.1.2 for the measurement method.

Temperature Chamber

Signal Generator

Communication Tester

TWO-WAY RADIO ( EUT)


8.4. Test Results

Test Result of 25 KHz Channel Separation

Test Condition Result Measured

(dBuV)

Limit

( dBuV) Temperature ( )℃ Voltage ( V )

T Nor ( 25 )℃ DC 7.40V 3.31 6

T min ( -20 )℃ DC 7.40V 4.21 12 DC 6.29V 3.36 12

T Max ( +55 )℃ DC 7.40V 4.41 12 DC 6.29V 3.37 12

Result Pass

Test Result of 12.5 KHz Channel Separation


( dBuV )

Limit

( dBuV ) Temperature ( )℃ Voltage ( V )

T Nor ( 25 )℃ DC 7.40V 3.59 6

T min ( -20 )℃ DC 7.40V 4.42 12 DC 6.29V 4.32 12

T Max ( +55 )℃ DC 7.40V 4.56 12 DC 6.29V 4.96 12

Result Pass


9. Co-channel rejection 9.1. Limit

EN 300 086-1 Sub-clause 8.3.3 The co-channel rejection of the receiver as defined as in EN 300 086-1 Sub-clause 8.3.1, at the signal displacements given in the method of measurement., shall be

a) Between -8.0 dB and 0 dB for channel separation of 20 KHz and 25 KHz; b) Between -12.0 dB and 0 dB for channel separation of 12.5 KHz.


9.3. Test Procedure


Signal Generator 1


Combination Network

BASE/REPEATER (EUT)

Signal Generator 2


9.4. Test Results


Wanted Signal Channel

(MHz)

Unwanted Signal Frequency

(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F-0.003 -4.45 (-8,0) Pass

F F-0.0015 -4.53 (-8,0) Pass

F F+0.0015 -4.39 (-8,0) Pass

F F +0.003 -4.58 (-8,0) Pass



(MHz)


(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F-0.003 -6.87 (-12,0) Pass

F F-0.0015 -7.07 (-12,0) Pass

F F+0.0015 -7.79 (-12,0) Pass

F F +0.003 -7.45 (-12,0) Pass


10. Adjacent channel selectivity 10.1. Limit

EN 300 086-1 Sub-clause 8.4.3 The adjacent channel selectivity of the receiver as defined as in EN 300 086-1 Sub-clause 8.4.1, The adjacent channel selectivity for different channel separations shall not be less than the values given below.


10.3. Test Procedure Please refer to EN 300 086-1 Sub-clause 8.4.2 for the measurement method.

Temperature Chamber

Signal Generator 1


Combination Network

TWO-WAY RADIO (EUT)

Signal Generator 2


10.4. Test Results


at unwanted signal frequency above wanted signal frequency


( dB )

Limit

( dB ) Temperature ( )℃ Voltage ( V )

T Nor ( 25 )℃ DC 7.40V 88 70

T min ( -20 )℃ DC 7.40V 76 60 DC 6.29V 75 60

T Max ( +55 )℃ DC 7.40V 74 60 DC 6.29V 73 60

Result Pass


at unwanted signal frequency below wanted signal frequency


( dB )

Limit


T Nor ( 25 )℃ DC 7.40V 84 70

T min ( -20 )℃ DC 7.40V 76 60 DC 6.29V 73 60

T Max ( +55 )℃ DC 7.40V 75 60 DC 6.29V 74 60

Result Pass



at unwanted signal frequency above wanted signal frequency


( dB )

Limit


T Nor ( 25 )℃ DC 7.40V 78 60

T min ( -20 )℃ DC 7.40V 66 50 DC 6.29V 65 50

T Max ( +55 )℃ DC 7.40V 64 50 DC 6.29V 63 50

Result Pass


at unwanted signal frequency below wanted signal frequency


( dB )

Limit


T Nor ( 25 )℃ DC 7.40V 78 60

T min ( -20 )℃ DC 7.40V 66 50 DC 6.29V 65 50

T Max ( +55 )℃ DC 7.40V 64 50 DC 6.29V 64 50

Result Pass


11. Spurious response rejection 11.1. Limit

EN 300 086-1 Sub-clause 8.5.4 The spurious response rejection of the receiver as defined as in EN 300 086-1 Sub-clause 8.5.1, at any frequency separated from the nominal frequency of the receiver by two channels or more, the spurious response rejection ratio shall not be less than 70.0 dB.


The same as described in section 7.4

11.3. Test Procedure



11.4. Test Results


Test Result ( dB ) Limit ( dB )

81.9 ≥70

Result Pass Test Result of 12.5 KHz Channel Separation

Test Result ( dB ) Limit ( dB )

82.8 ≥70

Result Pass


12. Inter Modulation Response Rejection

12.1. Limit

EN 300 086-1 Sub-clause 8.6.3 The inter modulation response rejection of the receiver as defined as in EN 300 086-1 Sub-clause 8.6.1, shall not be less than the ratio of 70.0 dB for Base Station and 65.0 dB for mobile and hand portable stations.




Signal Generator 1


Combination Network

TWO-WAY RADIO (EUT)

Signal Generator 2

Signal Generator 3


12.4. Test Results

Test Result of 25 KHz Channel Separation At Above Wanted Signal Channel

Wanted SignalChannel

(MHz)

Unmodulated Unwanted SignalFrequency

(MHz)

Modulated UnwantedSignal Frequency(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F +0.025 F +0.050 75.7 ≥65 Pass

F F +0.050 F +0.10 75.9 ≥65 Pass

Test Result of 25 KHz Channel Separation At Below Wanted Signal Channel


(MHz)


(MHz)


Test Result

( dB )

Limit

( dB ) Result

F F -0.025 F -0.050 77.1 ≥65 Pass F F-0.050 F -0.10 77.3 ≥65 Pass

Test Result of 12.5 KHz Channel Separation At Above Wanted Signal Channel


(MHz)


(MHz)


Test Result

( dB )

Limit

( dB ) Result

F F +0.025 F +0.050 72.3 ≥65 Pass

F F +0.050 F +0.10 72.4 ≥65 Pass

Test Result of 12.5 KHz Channel Separation At Below Wanted Signal Channel


(MHz)


(MHz)


Test Result

( dB )

Limit

( dB ) Result

F F -0.025 F -0.050 78.3 ≥65 Pass

F F -0.050 F -0.10 78.2 ≥65 Pass


13. Blocking Or Desensitization

13.1. Limit

EN 300 086-1 Sub-clause 5.2.8 The blocking or desensitization of the receiver as defined in EN 300 086-1 Sub-clause 8.7.1, for any frequency within the specified range, shall not be less than 84.0 dB, except at frequencies on which spurious response are found


The same as described in section 7.4




13.4. Test Results

Test Result of 25 KHz Channel Separation At Above Wanted Signal Channel


(MHz)

Unwanted SignalFrequency

(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F +1 89.9 ≥84 Pass

F F +2 91.2 ≥84 Pass

F F +5 90.7 ≥84 Pass

F F +10 91.4 ≥84 Pass

Test Result of 25 KHz Channel Separation At Below Wanted Signal Channel


(MHz)


(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F -1 86.8 ≥84 Pass

F F -2 87.8 ≥84 Pass

F F -5 89.2 ≥84 Pass

F F -10 90.3 ≥84 Pass

Test Result of 12.5 KHz Channel Separation At Above Wanted Signal Channel


(MHz)


(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F +1 87.9 ≥84 Pass F F +2 86.2 ≥84 Pass F F +5 90.5 ≥84 Pass F F +10 90.8 ≥84 Pass

Test Result of 12.5 KHz Channel Separation At Below Wanted Signal Channel


(MHz)


(MHz)

Test Result

( dB )

Limit

( dB ) Result

F F -1 88.2 ≥84 Pass F F -2 87.8 ≥84 Pass F F -5 91.2 ≥84 Pass F F -10 91.7 ≥84 Pass


14. Receiver Spurious Radiations 14.1. Limit EN 300 086-1 Sub-clause 8.8 The spurious radiation of the receiver as defined in EN 300 086-1 Sub-clause 8.8, shall not exceed the values given in tables 7 and 8

Table 7: Conducted components

Frequency Range 9 KHz to 1GHz Above 1GHz to 4GHz, or above 1GHz to 12.75GHz

Limit 2.0 nW (-57 dBm ) 20 nW ( -47 dBm )

Table 8: Radiated emissions Frequency Range 30 MHz to 1GHz Above 1GHz to 4GHz

Limit 2.0 nW (-57 dBm ) 20 nW ( -47 dBm )


14.2. Test Setup



14.4. Test Result


Test Mode：Lowest Channel, Rx mode, 12.5KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.14 -57.00 15.14 562.35 V -73.58 -57.00 16.58 589.48 V -71.26 -57.00 14.26

2348.17 V -65.46 -47.00 18.46 2654.67 V -65.53 -47.00 18.53 3187.48 V -67.78 -47.00 20.78

63.53 H -71.29 -57.00 14.29 526.32 H -73.64 -57.00 16.64

1412.49 H -64.81 -47.00 17.81 2544.38 H -66.49 -47.00 19.49

Test Mode：Highest Channel Rx mode, 12.5KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.03 -57.00 15.03 562.35 V -73.79 -57.00 16.79 589.48 V -71.42 -57.00 14.42

2348.17 V -65.57 -47.00 18.57 2654.67 V -65.38 -47.00 18.38 3187.48 V -67.67 -47.00 20.67

63.53 H -71.62 -57.00 14.62 526.32 H -73.56 -57.00 16.56

1412.49 H -64.43 -47.00 17.43 2544.38 H -66.56 -47.00 19.56


Test Mode：Lowest Channel, Rx mode, 25KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.65 -57.00 15.65 562.35 V -73.72 -57.00 16.72 589.48 V -71.48 -57.00 14.48

2348.17 V -65.29 -47.00 18.29 2654.67 V -65.54 -47.00 18.54 3187.48 V -67.82 -47.00 20.82

63.53 H -71.49 -57.00 14.49 526.32 H -73.35 -57.00 16.35

1412.49 H -64.29 -47.00 17.29 2544.38 H -66.16 -47.00 19.16

Test Mode：Highest Channel, Rx mode, 25KHz Channel Spacing

Frequency (MHz)


Result (dBm)

Limit (dBm)

Margin (dB)

35.31 V -72.34 -57.00 15.34 562.35 V -73.37 -57.00 16.37 589.48 V -71.26 -57.00 14.26

2348.17 V -65.55 -47.00 18.55 2654.67 V -65.64 -47.00 18.64 3187.48 V -67.72 -47.00 20.72

63.53 H -71.16 -57.00 14.16 526.32 H -73.78 -57.00 16.78

1412.49 H -64.63 -47.00 17.63 2544.38 H -66.97 -47.00 19.97

Note: All modes of channel spacing have been tested, and only worst data listed.


15. Photos of test setup

P a g e 4 6 o f 5 3 Report No.: B-E16049597

16.Photos of EUT

P a g e 4 7 o f 5 3 Report No.: B-E16049597


---------END OF THE REPORT-------

en 300 086 radio test report - retevis · page 1 of 53 report no.: b-e16049597 en 300 086 radio...

Documents