en 1092-1 flangesthis british standard is the implementation of en 1092-1. it supersedes bs en...

Click here to load reader

Post on 12-Mar-2020

68 views

Category:

Documents

2 download

Embed Size (px)

TRANSCRIPT

  • EN 1092-1 Flanges

    This British Standard is the Implementation of EN 1092-1. It Supersedes BS EN 1092-1 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee. PSE/15, Flanges. In BS EN 1092-1. A European metric standard that covers Specification for Circular flanges, Ranging from DN size 10 to 4000 and PN designations of 2, 5 and 100.

    Standard Specification For EN 1092-1 Flanges :Type : Plate Flange, Welding neck flange, steel butt-welded flanges, slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, Orifice Flanges, long weld neck flange and special flange.Material : Carbon steel: A105, SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8, Stainless Steel: F304 F304L F316 F316L 316Ti, Copper etc.Standard: ANSI/ASME B16.47 Ser.A, EN 1092-1 Flange.Dimensions : ANSI B16.5, DIN Series A & B, MSS SP44, ASA, API-605, AWWA, Custom DrawingsSize : 1/2" (15 NB) to 48" (1200NB)Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673BS : BS4504 , BS4504, BS1560, BS10Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 Flanges Summary Chart

    Rated Pressure (in bar)

    (1 bar = 14.5 psi = 100 kPa) Description

    6 10 16 25 40 63 100

    01 Plate flanges for

    welding V V V V V V V

    02 Loose plate flanges with

    weld-on plate collar V V V V V

    04 Loose plate flanges with

    weld-neck collar V V V V V

    05 Blank flanges V V V V V V V

    11 Weld-Neck Flanges V V V V V V V

    12 Hubbed slip-on flanges for

    welding V V V V V V V

    13 Hubbed threaded flanges V V V V

    21 Integral flnages V V V V V V V

    32 Weld-on plate collars V V V V V

    33 Lapped pipe ends V V V V V

    34 Weld-neck collars V V V V V

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • Flange Facing Dimensions EN 1092-1

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • Flange Facing Dimensions EN 1092-1

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN6 Flanges

    Flange type (typ) as in EN 1092-1

    01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN6 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. Note 2: For d1 dimensions see document "Flange Facing Dimensions EN 1092-1".

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN10 Flanges

    Flange type (typ) as in EN 1092-1

    01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN10 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. Note 2: For d1 dimensions see document "Flange Facing Dimensions EN 1092-1".

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN16 Flanges

    Flange type (typ) as in EN 1092-1

    01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN16 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. Note 2: For d1 dimensions see document "Flange Facing Dimensions EN 1092-1".

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN25 Flanges

    Flange type (typ) as in EN 1092-1

    01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN25 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. Note 2: For d1 dimensions see document " Flange Facing Dimensions EN 1092-1".

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN40 Flanges

    Flange type (typ) as in EN 1092-1

    01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN40 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. Note 2: For d1 dimensions see document "Flange Facing Dimensions EN 1092-1".

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN63 Flanges

    Flange type (typ) as in EN 1092-1

    01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN63 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange.

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN100 Flanges

    Flange type (typ) as in EN 1092-1 01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

    02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

    04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

    05 (Blank [blind] flanges) 33 (Lapped pipe ends)

    11 (Weld-neck flanges) 34 (Weld-neck collars)

    12 (Hubbed slip-on flanges for welding)

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/

  • EN 1092-1 PN100 Flanges

    Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange.

    [email protected] www.regalsalescorp.com [email protected]

    https://www.regalsalescorp.com/