LAUNCHING INNOVATIVE PRODUCTS INTO THE FUTURE

RESISTOR PRODUCTS

ELECTROCOMPONENTS

THERMAL MANAGEMENT SOLUTIONS

North America: +1-800-757-6686 • International: +1-508-435-6831 • Asia: +65-6481-1466 • www.ctscorp.com • ceramicsales@ctscorp.com

FREQUENCY CONTROL PRODUCTS

EMC PRODUCTS

CERAMIC COMPONENTS

FILTERED TERMINAL BLOCKSEliminate Electromagnetic Interference (EMI)UL Standard 1059 Compliant

Terminal B locksCTS UL-recognized filtered terminal blocks are specifically designed to save time and money for EMI filtering applications. By combining a filtering component with an industry standard terminal block, CTS has created an effective barrier to EMI noise.

CTS filtered terminal blocks allow the engineer to eliminate EMI using an existing mechanical design element combined with the excellent performance of a Pi filter.

PCB Mounted F i l teredTerminal B locksCTS latest line of filtered terminal blocks allow engineers the ability to mount the blocks directly onto the PCB. These filters save labor as well as board space. In addition, the filoffers a wide range of performance while meeting specific requirements. It is the perfect EMI solution.

SPECIFICATIONS

• 2-8 terminals available• Operating temperature: -55°C to 105°C• Working voltage: Up to 250 VAC

• Capacitance: Up to 15 nF• DC resistance: 0.01 Ohms max.• Wire sizes to #12 AWG• Screw size: #6-32 or #8-32 head screw• Insertion loss: 65dB up to 10GHz

SPECIFICATIONS

• Operating temperature: -40°C to 105°C• DC working voltages: 100VDC @ 85°C• Capacitance: Up to 2500 pF• Dielectric withstanding voltage: 707VDC

• Insulation resistance: ≥ 10 GΩ• DC current: 12 Amps• DC resistance: ≤ 10 mΩ

North America: +1-800-757-6686 International: +1-508-435-6831 Asia: +65-6481-1466 www.ctscorp.com emcsales@ctscorp.com

EMI /RFI F ILTERSCoaxial BroadbandHigh Frequency, Low Pass

C Filter

L Filter

‘H igh f requency, sma l l s i ze , exce l len t capac i tance va lues ’

Coaxia l Broadband EMI /RFI F i l tersCTS coaxial broadband EMI/RFI filters have high capacitance values (up to 1.4 μF), and are resin and hermetically sealed. These filters are available to MIL-PRF-15733 standards.

SPECIFICATIONS

• Max. torque: 9 in-lbs (1.04 Nm)• DC resistance: 0.01 Ohms max.• Working voltages up to 280 VDC at 125°C• Insertion loss: Up to 70dB at 1GHz• 4601 series seal tested per MIL-STD-202, Method 112, Condition A°CAPPLICATIONS: Power Supplies, Power Inputs & Outputs, Industrial Controls and Telecommunications Equipment

High Frequency, Low PassEMI /RFI F i l tersCTS has a wide range of high frequency, low pass filters that are small in sizeand offer excellent performance. These filters save bulkhead space and eliminate EMI while reducing cost.

SPECIFICATIONS

• Frequency range 1MHz to 10GHz• Operating temperature: -55°C to +125°C• Capacitance values up to 100,000 pF• Capacitance tolerance (+100%, 0%) (+80%, -20%), or customer specific• Working voltage: 50-2,000 VDC

• Current: 5-25 Amps• Suggested mounting torque from 2 in-lbs to 9 in-lbs (0.231 to 1.04 Nm)• Hex nut 0.125 in-0.5 in across the flats• Max. solder temperature 500°F (260°C)

APPLICATIONS: Telecommunications, CATV, Telemetry, Radar, Amplifiers and RF Switches

Pi Filter

C Filter

Pi Filter

C Filter

EMI /RFI F ILTERSSurface MountQuick Connect & Bolt-In Filter Plate AssembliesQQuicidfojosdijflONSQlka

EMI /RFI Sur face Mount F i l tersCTS 4700 series Pi and C filters are used where cost and space savings are a priority and improved insertion loss is required. The filter's unique design makes it suitable for common production soldering processes. The state-of-the-art manufacturing process results in excellent electrical and mechanical performance. The square or round body allows easy handling, positioning and soldering onto the PCB. The 4700 series is another cost effective, quality product from CTS.

SPECIFICATIONS

• 100 VDC up to 125°C• Dielectric withstanding: 300 VDC

• 4700/4701 DC rating: 10 Amps; 4702 DC rating: 20 Amps• Insertion loss: Up to 70dB at 1GHz• Capacitance: 100 pF to 5,000 pF

EMI /RFI F i l ters & Capaci tor Assembl iesCTS quick-connect and bolt-in filter plate assemblies provide ease of installation and line customization of standard size plates. Filter plates are the most efficient and cost effective solution for filtering multiple lines into or between different system compartments.

For higher frequency applications (above 50MHz), filter plates can be more effective than typical surface mount solutions. The natural shielding quality of the plates creates an effective RF barrier that provides excellent insertion loss and isolation for frequencies above 5MHz. The pre-assembled plates greatly reduce the time and resources required to individually install solder or bushing mount filters.

CTS quick connect series of filter plates features a base plate with built-in installation clips. These clips allow for cost effective mounting into the system’s bulkhead without the cost associated with traditional hardware.

SPECIFICATIONS

• Operating temperature: -55°C to 125°C• Capacitance values up to 10,000 pF• Working voltage at 125°C: 100 VDC

• Current: 5-10 Amps• No-load insertion loss: 70dB up to 10GHz

‘For use where cos t sav ing i s a p r io r i t y and improved inser t ion loss i s requ i red ’

CERAMIC CAPACITORS &RESONATORSHigh Q FactorCircuit Miniaturization

Ceramic Tr immer Capaci torsCTS leads the way in the miniaturization of ceramic trimmers. The 513 SMT, all-ceramic trimmer capacitor offers outstanding features such as

exceptionally smooth tuning, extra miniaturized - 0.196 diameter x 0.100in height max. (4.98 x 2.54mm) ceramic base & dielectric - very stable, high Q factor for ultra high frequency applications, wide temperature range - functional under extreme conditions, SMD on tape and reel - suitable for automatic pick and place, and rugged construction.

DISC Ceramic WEECON® Capaci torsKnown throughout the industry for quality and reliability, CTS prides itself on maintaining an excellent track record in producing high reliability products.

Our DISC ceramic capacitors have three classifications:Temperature Compensating - highest Q, minute capacitiance change with temperature, more stable than glass or mica. Extended Temperature Compensating - finite andrepeatable capacitance change with temperature, alsohigh Q and stability.High Dielectric Constant - high capacitance, low dissi-pation factor replaces paper, film, glass, mica in generalpurpose applications.

CTS WEECONS® have long been the industry standard and offer the broadest selection of available ceramic formulations and package sizes. With a capacitance range of 1 pF to 0.082 mF, WEECON® capacitors offer a variety of TC materials and tolerances. The range of temperature characteristics available make the WEECON® suitable from the ultra stable requirements of tuned circuits to the general purpose needs for coupling and bypassing.

Encapsulated with a hard, bright polymeric coating, these capaci-tors are formulated to provide mechanical protection under nor-mal environmental conditions.

Available in 25, 50, 100 and 500 volts Thickness from 0.1 to 0.175in (depends on voltage)Square sizes from 0.1 x 0.1 in to 0.6 x 0.6in Operates efficiently at -55°C to 125°C

SPECIFICATIONS

• Operating temperature: -55°C to 125°C• Capacitance range of 1-3 pF max. to 10-60 pF max.• Working voltage: 25-200 VDC

• Dielectric strength: 50-500 VDC

• Torque from 0.3 in-oz to 6 in-oz (0.035 to 0.693 Nm)

APPLICATIONS: Point to Point, PCB, Avionics, Communications Equipment and Instrumentation.

SPECIFICATIONS

• Sizes: 2, 3, 4, 6, 8, 12mm• Dielectric constant: 9 min., 90 max.• Frequency range: 250MHz — 6GHz*• Electrodes: High density, fired on silver, with tin plating over nickel barrier finish*Higher frequencies available by special order.

APPLICATIONS: Voltage Controlled Oscillators (VCOs), Coaxial Resonator Oscillators (CROs), Bandpass Filters, Wireless Devices and Duplexers.

Ceramic Coaxia l ResonatorsCTS ceramic coaxial resonators are offered in four sizes and four dielectric constants with a frequency range from 800MHz to 5.9GHz. To ensure superior performance and adequate miniaturization, these parts are made of quality metalized ceramics. CTS offers the best ceramic composition in order to meet all necessary temperature performance, shielding and miniaturization requirements for an endless number of applications.

‘Super io r per fo rmance, ex t ramin ia tu r i zed , and h igh Q fac to r ’

www.ctscorp.com North America: +1-800-757-6686

International: +1-508-435-6831

Asia: +65-655-17551

LAUNCHING INNOVATIVE PRODUCTS INTO THE FUTURE

Quartz Crystals Clock Oscillators Timing Modules Semiconductor ICs

FREQUENCY CONTROL PRODUCTS

EMC PRODUCTS Surface Mount Filters Feed Through Filters Filtered Terminal Blocks Variable Trimmer Capacitors Coaxial Resonators Custom EMI Filter Plate Assemblies Ceramic Disc Capacitors

CERAMIC COMPONENTS

RESISTOR PRODUCTS

ELECTROCOMPONENTS

THERMAL MANAGEMENT SOLUTIONS

Monoblock Filters Monoblock Duplexers ClearPlex® Waveguide Filters

ClearONE™ Terminators Chip Resistor Arrays Current Sensing Ultra High Resistance

Potentiometers Encoders Mini-Joysticks Rotary Switches DIP Switches Trimmer Potentiometers Sensors and Controls Custom Assemblies

Heat Sinks Fansinks ZIF Circuit Card Retainers