EMGE ELECTRO MECHANICAL EQUIPMENTS INDUSTRY Inc. Co.

Since 1975

ABOUT EMGE

• EMGE is a family business established by two brothers in 1975 underthe name of «ERTUĞLAR» withh a workshop area of only 90 m2. Then, the commercial name of Company was changed to EMGE electro Mechanical Equipments Industry in 1981.

• FACILITIES

• CURRENT 8.000 m2 closed area, 10.000 m2 open area in OSTİM ANKARA

• End of 2021 closed area17.500m2, total 21.500 m2 in Kazan ANKARA production only for defence and Aerospace industry.

• 6.000m2 closed area in Ostim ANKARA only for energy sector.

• WORK FORCE; 30 ENGINEER TOTAL 200

SECTORS

• DEFENCE AND AEROSPACE

• ELECTRIC - ELECTRONIC

• ELECTRO MECHANIC

• LIGTING

• MEDICAL

HAND CONTROL UNIT (JOYSTICK)• AIR VEHICLE

• CYCLIC & COLLECTIVE (GOKBEY HELICOPTER FOR TURKISH AEROSPACE INDUSTRY)

• PCL (HÜRKUŞ FOR TURKISH AEROSPACE INDUSTRY)

• LAND VEHICLES• GUNNER HCU• GAMEPAD• ONE ARM HCU• DOUBLE ARM HCU

• MARINE VEHICLE• MARINE COMBAT MANAGEMENT SYSTEM CONSOLE

HCU• MARINE GUN HCU

SLIPRING ROTOR

Mass production started in April 2016. Production continues according to our Customer ASELSAN’ s need.

GENERAL FEATURES• Outside Diameter 10 - 1500mm • Max 74 line, • Power, signal and data line, • Production with harness,• Contact gold or silver

SOLENOID

• PGA SOLENOID

• MISSILE IGNITION SOLENOID

• 35mm BOMB SHOOTER

• 40mm SOLENOID

• 12,7 SOLENOID

• 7,62 SOLENOID

• 12,7 VE 7,62 PUSH-PULL SOLENOID

INFRARED LED

IR series infrared illuminators are designed for long distance illumination in night vision systems. Designed using LED technology for long life and high efficiency, IR illuminators are more environmentally friendly and ergonomic with low carbon emission, less energy consumption, and directional luminaire design.

LIGTING

• Industrial and decortive lighting

• Lens production

PANEL TYPE MEASUREMENT DEVICES

• Analog and Digital

HIGH VOLTAGE SAFETY EQUIPMENTS

PRODUCTION - MACHINING

• 5 Axes: 1700mm x 3000 mm x h 800 mm

• 3 axes: 3200mm x 1800mm x h 1000 mm

PRODUCTION - PLASTIC INJECTION

• PLASTIC INJECTION, DESIGN AND PRODUCE PLASTIC INJECTION MOLD• From 1gr to 1,5 Kg.

PRODUCTION – ELECTIC & ELECTRONIC

• SMD ASSEMBLY LINE• PCB SIZE: 510mm x 460mm• STRING SPEED: ̴̴ 30.000 komponent/saat• COMPONENT SIZE: 01005(0,4x0,2mm)-70x70mm • COMPONENT HIGH:0,25mm-20mm• TYPE OF COMPONENT: Pulley, tube, trey• Sensitivity: for IC material 30µM, For chip material 50 µM

• ULTRASONIC WELDING• COIL WRAPPING WORKSHOP• VACUUM CASTING WORKSHOP• SERIGRAPHY & BUMPER PRONT WORKSHOP

TEST ABILITY

• CLIMATE TEST-80, +180 º C with humidity module

• VIBRATION AND SHOCK TEST• Plate size: 60x60 cm• Capacity: Full power band width 20 Hz to 3000 Hz• Max 120 Kg• Test ability according to MIL-STD-810 G VE DO-160 G

• TIGHTNESS TEST

• SPRAY TEST• DO-160 G Section 10 Category W

• LIGTHNING TEST• 1000 VDC

• SPECIAL DESIGN LIFE CYCLE TEST

• POWER INPUT TEST• DO-160 G , Section 16, Caegory. Z

• DESIGN AND PRODUCTION SPECIAL TEST SYSTEMS

QUALTY AND SYSTEM

• CERTIFICATION• EYDEP ES 501-A CERTIFICATION FROM PRESIDENCY OF DEFENCE INDUSTRY

• AS9100 AND ISO 9100 (FROM BSI)

• OHSAS 18001 VE EN ISO 14001

• SYSTEM• ERP : CANIAS

• IOTT

REFERANCES

• STRATEGICAL PARTNER OF ASELSAN A.Ş. AND TUSAŞ A.Ş.

• APPROVED SUPPLIER OF FNSS , BMC, ROKETSAN, HAVELSAN, KALE AERO, HAVELSAN TEKNOLOJİ RADAR, LEONARDO COMPANY, ZODIAC AEROSPACE etc.

CONTACT INFORMATION

• ADRESS: Ostim OSB Mahallesi 1211. Cad. No:14 Yenimahalle - Ankara - TÜRKİYE

• Tel: +90 312 354 92 71(Pbx)

• Fax:+90 312 354 54 81• Web: www.emge.com.tr• E-mail: emge@emge.com.tr• Sales: muge@emge.com.tr