emergency lights and sirens for traffic departments ... suite 03 westdene park, 57 kellner street...
TRANSCRIPT
1
Contact Us:
T: +27 51 430 5328F: +27 86 636 3217www.bbtechonline.co.za
Suite 03 Westdene Park, 57 Kellner StreetWestdene, Bloemfontein, 9301
BB Technologies is a 100% black owned corporation registered in terms of the ‘CIPRO’ act of 1998; we are a professional national suppliers and installers of emergency lights and sirens for traffic departments, health departments, both public and private sector, we are based in Bloemfontein, Free State. The company was founded in 2010.
BB Technologies aims to provide an excellent service to its customers that will enable it to grow to be amongst the best emergency lights and sirens suppliers in South Africa, Our dedicated technicians strives to offer top quality service at all time.
2
LED (LIGHT EMITTING DIODE) WHAT IS AN LED?An LED is a special diode that emits light when connected to a circuit board. Inside the diode is a semi-conductor chip with positive and negative electrons separated by a junction. When sufficient voltage is supplied, the electrons cross the junction and join together to create light.
WHY LED’S ARE THE LIGHT OF THE FUTURE• Energy efficient - extremely low consumption compared to incandescent globes• Reliability - a light source with a lifetime of up to 50 000 hours of constant use• Safety - rapid switching characteristics leads to quicker response times• Damage resistant - epoxy resined instead of glass housing• Shock resistant - a chip encased in epoxy resin instead of a filament• Vibration resistant - soldered circuit board has no moving or loose parts• Water resistant - no service required therefore can be fully enclosed in a unit• Flexibility - because of its versatility, any design is possible
Module Generation 3 (Amber, Blue, Red, White)
2
3
SM3 LIGHTBARS
MAGNETIC MOUNT MINI LIGHTBAR WITH BUILT-IN SPEAKER & NON P.A. AMPLIFIER
MOTOR CYCLE LIGHTBAR
4
SPECIFICATIONS• Height - 70mm• Width - 220mm• Length - 200mm to 2300mm
FEATURES• Aerodynamic design to reduce drag and increase fuel economy of vehicle• 360º light output on a horizontal line• Extremely low current draw (0.3 amps per module)• 1W LED’s in each module• 4 head LED modules available on request• LED modules and lenses are separate components which reduces replacement costs• Customers option for LED integrated lenses or separate lens and LED modules• SAE certified top quality LED’s• No form of atmospheric charge can interfere with LED’s• With correct installation practices, the lightbar can withstand the toughest road conditions• Multiple colour combinations of LED modules and lenses available• Available with a magnet kit for mini lightbars (refer RB80 or RB90 on page 17)• Available with TR DECO and/or TR SIGN (refer to pg 17)
ASSEMBLY• Specifically designed aluminum with 10 micron anodising for protection against rust and cracks• Ultra violet stabilisation on polycarbonate lenses guaranteed not to fade or crack under normal conditions• Epoxy resined printed circuit boards for extreme weather conditions• Stainless steel, powder coated mounting brackets for strength and durability• Pure natural moulded rubber pads for protection between vehicle and lightbar, and reduction of vibration related faults• High quality brushed stainless steel (304) clamps for drill-less mounting to vehicles• Two button touchpad with LED indicator lamps for easy control of lightbar• Can be built to house 100W speaker (41004) and/or amplifier (refer to pg 7)
Our 90kg magnets (RB90) are currently used by traffic departments nationally for their strength and durability
4
5
FEATURES• Aerodynamic design to reduce drag and increase fuel economy of vehicle• 360º light output on a horizontal line• Extremely low current draw (0.4 amps per head)• 5mm LED’s used (75 in each head)• 5mm LED strips available on request• LED heads and lenses are separate components which reduces replacement costs• No form of atmospheric charge can interfere with the LED’s• With correct installation practices, the lightbar can withstand the toughest road conditions• Multiple colour combinations of LED strips and lenses available• Available with a magnet kit for mini lightbars (refer RB80 or RB90 on page 17)• Available with TR DECO and/or TR SIGN (refer to pg 17)
SM2 LIGHTBARS
SPECIFICATIONS• Height - 70mm• Width - 220mm• Length - 200mm to 2300mm
Our 90kg magnets (RB90) are currently used by traffic departments nationally for their strength and durability
5
6
ASSEMBLY• Specifically designed aluminum with 10 micron anodising for protection against rust and cracks• Ultra violet stabilisation on polycarbonate lenses guaranteed not to fade or crack under normal conditions• Epoxy resined printed circuit boards for extreme weather conditions• Stainless steel, powder coated mounting brackets for strength and durability• Pure natural moulded rubber pads for protection between vehicle and lightbar, and reduction of vibration related faults• High quality brushed stainless steel (304) clamps for drill less mounting to vehicles• Two button touchpad with LED indicator lamps for easy control of lightbar• Can be built to house 100W speaker (41004) and/or amplifier (refer to pg 7)
• Designed for use by vehicles on mine sites• Reverse alarm buzzer can be installed insidelightbar or on vehicle• Can include signage on front side of lightbar• Number of modules can vary
MINE LIGHTBARS
SPECIFICATIONS• Height - 70mm• Width - 220mm• Length - 600mm to 2300mm
7
FEATURES• Aerodynamic design to reduce drag and increase fuel economy of vehicle• 360º light output on a horizontal line• Extremely low current draw (0.3 amps per module)• 1W LED’s used inside the module• LED modules and lenses are separate components which reduces replacement costs• Customers option for LED integrated lenses or separate lens and LED module• SAE certified top quality LED’s• No form of atmospheric charge can interfere in LED’s• With correct installation practices, the lightbar can withstand the toughest road conditions• Reverse alarm buzzer built into lightbar or separately mounted on vehicle• Available with TR SIGN (refer to pg 17)
7
ASSEMBLY• Specifically designed aluminum with 10 micron anodising for protection against rust and cracks• Ultra violet stabilisation on polycarbonate lenses guaranteed not to fade or crack under normal conditions• Stainless steel, powder coated mounting brackets for strength and durability• Pure natural moulded rubber pads for protection between vehicle and lightbar, and reduction of vibration related faults• High quality brushed stainless steel (304) clamps for drill less mounting to vehicles
The purpose of a mine lightbar is to createa high level of visibility for vehicles travellingon a mine site under a variety of low visibility conditions.
88
AMPLIFIERS & SPEAKERSMICROPHONESMDM-350 • Microphone and controller for amplifiersMDM-350N • P.A. and Non-P.A. option • Easily removeable from amplifier
AMPLIFIERS41001 • 12V or 24V available(P.A.) • 100W or 200W systems • Radio talk through • Standard tones (Yelp, Phaser, Wail) • HRT (Horn Ring Transfer) hooter activation41002 • 11 ohm output to minimise current draw(Non P.A.) • Anodised aluminium housingSPEAKER DRIVER41003 • 100W speaker • 11 ohm resistance for compatability to the amplifier • Complete with bell, tip and bracket
MILLED SPEAKER DRIVER41004 • 100W speaker for lightbar • 11 ohm resistance for compatability to the amplifier • Modified throat for easy installation into lightbar
SPEAKER TRUMPET41005 • Speaker trumpet for lightbar • Used together with 41004 • Custom made for our aluminium lightbar base to allow for easy installation
9
STROBE LIGHT SYSTEMS
DASH LIGHTS & SM3 FLAT BAR
• 60W strobe power supply• Individually fused power supply• Screened cabling for zero interference• Complete with four strobe tubes• Installed inside headlights and tail lights• Control unit mounted inside vehicle• LED strobe systems also available
DASH LIGHT• Generation 3 LED’s• Detachable or permanent mount• Length can vary per customers requirements• Different colour combinations available• Can house multiple modules• Two button touchpad with LED indicator lamps for easy control of lighting unit
SM3 FLAT BAR• Generation 3 LED’s• Magnetic or permanent mount• Any length up to 2m• Ideal for canopied vehicles• Multiple colour combinations• Can be linked to driving system as an attachment for towed vehicles via trailer plug
1 01 0
BEACON LIGHTS
MARKER LIGHTS
• Available in 12V or 24V• Mounted on a full stainless steel bearing• Multistage chrome mirroring for durability• High quality polycarbonate lenses (Available in blue, amber, red or clear)• Silent running thanks to nylatron gearing• LED option with 300 5mm LED’s• Magnetic or permanent mount
• Available in 12V or 24V• Dimensions - TR100 100mm x 50mm TR180 200mm x 100mm• Waterproofed for exterior mounting on vehicles• High quality polycarbonate lenses (Available in blue, amber, red or clear)• Available with a built-in flasher for independent operation
TR180 TR 100
1 1
Flasher unit for lightbarResined to prevent moisture damageLabelled for easy installationMaximum draw per channel is 6 x Generation 33 head modules or 5 x Generation 3 4 head modules
TRF060
Flasher unit for lightbarPositive switchingWorks together with TRC066Maximum draw per channel is 6 x Generation 33 head modules or 5 x Generation 3 4 head modulesInstalled inside the vehicle together with control box
TRF066
Used for lightbars with less than 10 modulesPreprogrammed with 6 flash patternsEasily connected to lightbarHarness length as per customerColour coding ensures easy connection to lightbar
TRF022
Works with TRF060Preprogrammed with 6 flash patternsEasily connected to light barHarness length as per customerFor lightbars with 10 or more modulesColour coding ensures easy connection to lightbar
TRC022
Generation 3 3 head or 4 head LED module1W per LEDLow current drawAvailable in blue, red, white, amber or greenComes with bezel for external mountingSelf flashing modules also available
48304
48303
Lens kit for lightbar (including seals)All lenses are UV stabilisedAvailable in blue, clear, opaque white,red, amber, purple or green
TR1000
Controller for TRF0666 LED’s showing lightbar flashing patternAuxillary connection for other lightsBuilt-in amplifier control
TRC066
SPARE PARTS & ACCESSORIES
1 2
SPARE PARTS & ACCESSORIES
Premium mounting kit for lightbarsVarious size clamps available to suite different vehiclesPowder coated to prevent rusting
Standard mounting kit for lightbarsVarious size clamps available to suite different vehiclesPowder coated to prevent rusting
Magnet for lightbar and beacon lightPulling power up to 45kgsNot suitable for high speed vehicles
Magnet for lightbar and beacon lightPulling power up to 90kgsSuitable for high speed vehiclesAvailable with rubber boot
Deco globes available as spotlights for policeand security lightbarsPositioned on the side or front of lightbar
Lens for beacon lightAvailable in blue, red, amber or clear
Signage available to show company name,vehicle number or telephone number
SM BRACKETKIT
Z BRACKETKIT
RB80
RB90
TR DECO
TR1001
TR SIGN
1 3
SPARE PARTS & ACCESSORIES
OTHER ACCESSORIES
Rotating module for beacon light84055
MAP LIGHTS
MAP LIGHTS
DRIVING LAMPS
Lens for lightbarAvailable in blue, red, amber, clear, opaque white,green or purple
End cap for lightbarAvailable in blue, red, amber, clear, opaque white,green or purple
TR1006
TR1007
ALSO AVAILABLE
1 4
1 5
1 6
TM8250 mobile radio
• Large LCD display – 14 characters and four lines of alphanumeric text • User-friendly menu structure for easy navigation • Four programmable function keys • Optional keypad microphone for enhanced dialing capability • 1500 conventional channels with built-in CTCSS and DCS • Data capable – supports 1200/2400 baud FFSK data as standard • Internal high speed data modem (12 kbps on NB channels/19.2 kbps on WB channels) (software option) • 300 scanning/voting groups and 26 channel zones • Full Selcall functionality • Displays and supports short data messages via CCDI (Computer Controlled Data Interface) • Voice inversion scrambling • MDC 1200 encode (software option) • Type 99 (2-tone) decode • Lone Worker function to improve worker safety • Multiple auxiliary ports and expansive internal options area • Direct connect GPS and GPS display option
The robust, high performance TM8250 mobile radio is the ideal choice for fast-moving mobile teams who rely on instant voice and data communications.