ellen finprotect plus - acorn architectural … guard.pdf · 188 www | 18 891 * c finprotect plus...

WWW.ZEROPLUS.CO.UK | TEL: +44 (0)1785 282910 All products usually available ex-stock except those marked with * Call for lead time188

FINGER PROTECTIONFI

NG

ER

PR

OT

EC

TIO

N

Finprotect Plus finger protection strips are anti-trapping devices that protect childrens’ fingers at the most dangerous side of the door, the hinge side. This is the side of the door where accidents can have serious consequences for thousands of children every year. It is so easy for little fingers to be trapped, crushed or pinched as a door closes. Fitting Finprotect Plus at the hinge side stops childrens’ fingers getting trapped and prevents every parent’s worst nightmare.

Finprotect Plus is ideal for use in play schools, nurseries, schools, supermarkets, family restaurants, fast food outlets, hotels, hospitals, doctors’ surgeries, libraries, leisure clubs, day-care centres, elderly persons’ homes, ….. in fact any building likely to be frequented by children or elderly people. It is quick and easy to install and keeps functioning year after year.

The standard set ref #FP5090 is a two-part set that fits both sides of the leaf. It comprises a narrow section for the hinge knuckle side of the leaf (pull side), and a broad section for the other side of the leaf (push side), this can be used on most single swing door types. There is also a single swing two-part set available ref #FP90120 which incorporates the wider #FP120 broad profile. This can be used on aluminium, PVC-u or steel single swing doors to give maximum opening angle. The single broad set ref #FP90 protects only the push side of the leaf, whereas the double swing sets #FP9090 or #FP120120 protect both sides of the double swing leaf. The #FP9090 is to be used with offset pivots i.e. double action spring hinges, where as the #FP120120 set can be used with double action floor springs. If required, it is possible to order only the narrow set ref #FP50 for the hinge knuckle side. The dual hardness synthetic section slots in to aluminium strips which have been fitted to the door and frame. This provides a totally concealed fixing.

ELLEN FINPROTECT PLUS

COLOURS

Finprotect Plus is available in white and black, and five colours: brown, silver-grey, blue, red and yellow to co-ordinate with building colour schemes. Please note that all RAL codes are indicative. Please see table opposite for exact colour options.

White +/- Ral 9010 Black +/- Ral 9005 Brown +/- Ral 8014 Silver grey +/- Ral 9006 Blue +/- Ral 5013 Red +/- Ral 3002 Yellow +/- Ral 1021

SIZES

The standard length for Finprotect Plus is 1980mm requiring no cutting if being used on standard 2040mm doors, but it can be cut to size with a junior hacksaw. However 2500mm lengths are also available to order for taller doors. The aluminium profiles that are fitted to the door and frame are 15mm wide x 10mm high.

LENGTHS

FINPROTECT PLUS 90 (ZF1) COLOUR

1980mm White, black, brown, grey, blue, red and yellow

2500mm White, black, brown and grey

FINPROTECT PLUS 5090 (ZF2)


















90

50

90

90

120

50

120

90

90

120

120

INSTALLATION

Full fixing instructions are supplied with every set as standard, but if further assistance is required there is an installation video available to view at www.finprotectplus.com. Finprotect Plus fits simply on to all types of doors. Despite this we recommend checking your door details with the fitting instructions before you start fitting. Torx screws are included with every set to assist assembly, also fixing instructions. The improved “fin” design speeds up installation. Simply fit the aluminium profiles to the door and the frame and then click the synthetic profiles into the aluminium channels. Finprotect Plus can be trimmed to length using a junior hacksaw, although care should be taken not to snag the “hinge” when cutting. In most instances we recommend the use of doorstops to limit the opening angle and to avoid damaging the Finprotect Plus. To fit Finprotect Plus you will require competent handyman skills and the following tools: a tape measure, a pencil, a hammer, a Torx 10 piece, a hack saw with 24 TPI minimum and a power driver. Also available to aid installation are self-tapping screws for fitting to aluminium or steel doors and self adhesive tape for fitting to metal or PVC-u doors. General fixing detail shown opposite but full installation instructions are supplied with every set.

n Strong design with five years guarantee

n Standard length of 1980mm requiring no cutting if being used on standard 2040mm doors

n 2500mm lengths also available for taller doors

n Concealed fixing and fast to fit with only 6 screws per side

n Can be temporarily removed if required to adjust hinges

n One product suits both internal and external doors

n Available black and white plus brown, silver-grey, red, yellow and blue (green now withdrawn)

n Broad profile #FP120 available for use with double action floorsprings

n Self-tapping screw pack available for metal doors (35 screws per pack). Ref 850100906

n Self-adhesive tape pack available for PVC-u and composite doors. Ref 805700000

TEL: +44 (0)1785 282910 | WWW.ZEROPLUS.CO.UKAll products usually available ex-stock except those marked with * Call for lead time 189

FINGER PROTECTIONFIN

GE

R P

RO

TE

CT

ION

TESTING & GUARANTEE

Finprotect has been tested to one million cycles at SHR (Holland) and is guaranteed for five years, subject to correct installation and fair wear and tear. It has been tested for safety, function and durability at LGA Nürnberg (Germany) and for fire retarding M1 at CSTB (France). TÜV certified.

OPENING ANGLES

Double swing aluminium doors and PVCu doors fitted with Finprotect are limited to 130° in either direction. However, the maximum opening angle for hinged timber and steel doors is between 130° and 180° depending on the type of hinge being used and the door thickness. If in doubt please refer to the measuring templates on our website which show the maximum “reach” of each profile; remember to print them off at a scale of 1:1 and then offer them up to the door and frame to establish which Finprotect profile is required for your door. For problem doors required to open to 180° we always suggest using the extra wide profile ZF6 (#FP120).

ELLEN FINPROTECT PLUS

SINGLE BROAD SET (ZF1)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED

RAL3002YELLOW RAL1021

FP90-198 (1980mm long) 6

FP90-250 (2500mm long) 6 - - -

FP90

STANDARD TWO-PART SET (ZF2)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED


FP5090-198 (1980mm long) 5

FP5090-250 (2500mm long) 5 - - -

FP5090

DOUBLE BROAD SET for D/A spring hinges (ZF3)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED


FP9090-198 (1980mm long) 3

FP9090-250 (2500mm long) 3 - - -

FP9090

SINGLE NARROW SET (ZF5)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED


FP50-198 (1980mm long) 6

FP50-250 (2500mm long) 6 - - -

FP50

SINGLE EXTENDED SET (ZF6)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED


FP120-198 (1980mm long) 2 - - -

FP120-250 (2500mm long) 2 - - -

FP120

TWO-PART EXTENDED SET (ZF7)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED


FP90120-198 (1980mm long) 1 - - -

FP90120-250 (2500mm long) 1 - - -

FP90120

DOUBLE EXTENDED SET for floor springs (ZF8)

BOX QTYWHITE

RAL9010BLACK

RAL9005BROWN

RAL8014GREY

RAL9006BLUE

RAL5013RED


FP120120-198 (1980mm long) 1 - - -

FP120120-250 (2500mm long) 1 - - -

FP120120

OTHER DOOR HARDWARE

1. Please remember to have kick plates cut shorter than usual, do not fit Finprotect Plus over the top of kick plates.

2. Ensure that door closer arms and door stays do not interfere with Finprotect Plus.

3. Fit a doorstop to limit opening angle as required.

ellen finprotect plus - acorn architectural … guard.pdf · 188 www | 18 891 * c finprotect plus...

Documents