elite emc elite shock and vibration...

Elite EMC Ltd and its sister divisions are leading suppliers of EMC

Solutions, Thermal Management and Anti-vibration products. Supplying

some of the major OEM, defence & aerospace manufacturers with both

standard and custom solutions. Staff with over 20 year's experience in

providing advice and technical support enables us to supply product and

solutions to your exacting requirements.

Elite EMC Ltd offer a comprehensive range of services and

products from some of the world's leading manufacturers:

Solutions you can rely on

Elite EMC

EMI/RFI Filters Filtered Connectors Shielding

Gasketing Ferrites EMC Consultancy,

Evaluation & Testing

Elite Shock and Vibration

HDD Mount PCB Mount Sandwich Stud

Sheet Material Fan Mounts Supersoft

Urethane Bushes All metal Extreme 2D & 3D

shock Boxes Industrial Heavy Duty

Aerospace Military Anti-Vibration Mounts.

Elite Thermal Management

Pressfin Heatsinks Thermal Interface Materials

Graphite Material Filler Pads Thermal

Paste Thermal Phase Change Thermal tapes

Elite EMC Ltd 12 Station Road, Marston Green, Birmingham, B37 7AS. United Kingdom

Tel: +44 (0)121 288 0543 Email: [email protected] www.eliteemc.com www.shockandvibration.co.uk www.elitethermalmanagement.co.uk

EMC Shock & Vibration Thermal Management

ELITE

IEC inlet Filters

IEC Inlet 1 - 15A

IEC Fused Inlet 1 - 10A

IEC Switched & Fused

Inlet 1 - 10A

Ferrites

Round Ferrite, Flat Ca-

ble Ferrites, Split

Ferrites, Ferrite Clamps.

Three Phase Filters

Three Phase Industrial High

Performance 10 - 150A

EMC Project Management

EMC Consultancy, Evaluation,

Testing, Test Plans.

Inverter Filters

High Performance Inverter

Filters 7A - 900A

Shielding and Gasketing Knitted Mesh, Woven Fabric Gasketing,

Carbon Rubber, Conductive

Silicone, Shielded Windows, Copper

Beryllium Finger Strips, Tapes.

Filtered Connectors

D-Sub, Transient Voltage Sup-pression, Lightning Protection, Feed Through & Filter Array, Hermetically Sealed, Custom.

Single Phase Filters

Single Phase Chassis Mount 1 - 20A

Single Phase Industrial 10 - 60A

Commercial & Industrial EMI/RFI Solutions

Feedthrough Capacitor

Assemblies

Multi-Line DC feedthrough

Assemblies 1A - 150A

Custom Military

EMI/RFI Filtering

Custom bespoke filtering

for Land, Air and Sea ap-

plications. 1A - 150A

Military Filtered Connectors ARINC 404/DPX, ARINC 600, MIL-C-

83733/DPX, MIL-C-26482, MIL-C-

38999 MIL-C-55116. MIL-C-5015

MIL-LAN, MIL-LAN, MIL-RJ45,

Military EMC

Project Management

EMC Consultancy, Evaluation,

Testing, Test Plans.

Def Stan 59-411 & Mil Std 461.

Vehicle & Shelter

EMI/RFI Filtering

High performance vehicle

and shelter filtering.

Vehicle HHAC

EMI/RFI Filtering

Air conditioning blower and

condenser fan, Cab heater.

Military IT Filtering

Military IT filtering, suitable

for land and sea platforms.

COTS & MOTS Filtering

Off the shelf COTS &

MOTS EMI/RFI Filtering

Military EMI/RFI Solutions - BM Series

A comprehensive range of single and three phase EMI/RFI filtering solutions and RF screening and

suppression devices. For use in the commercial, industrial, aerospace and military applications.

Both standard and custom bespoke filters and components. Ranges from 1A - 900A, DC and AC

www.elitetemc.com

Elite EMC

HDD & PCB AV Mounts

A comprehensive range of thermoplastic anti vibration grommets, for mounting HDD & PCB etc. Available with or without mounting kits.

Wide temperature ranges -40oC+200

oC.

Silicone & silicone free grommets available.

Stud & Sandwich AV Mounts

A comprehensive range of elastomer, supersoft urethane & silicone sandwich / stud mounts. Available in M/M, M/F, M/B, F/F & F/B configurations.


oC.

Silicone, urethane & elastomer materials. Load ranges: 130gms - 300kgs.

Sheet Materials

A large comprehensive range of sheet & foam materials offering high performance shock protection from as little as 2mm thickness Available in silicone & non-silicone.


oC.

Silicone gel, silicone foam, non-silicone gel & urethane foam. All materials have excellent vibration and shock absorbing performance.

Fan Mounts and Sleeves

Fan noise is a common problem in PC’s, set top boxes & other electronic equipment. Snap in fan mounts & sleeves are an easy way to reduce this problem.

Made from thermoplastic elastomer. Screwless fan sleeves for easy removal of fans. Available in a wide range of standard& Custom sizes.

2D & 3D Shock Boxes

2D & £d HDD shock boxes comprise a 2-part assembly utilizing either 4 or 8 grommets providing shock and vibration protection on X, Y & Z axis

Ideal to replace existing 5.5” and 3.5” HDD. Can be used with VB1209-80BK & VB1209-90V grommets. Available in 2 styles offering X & Y and X, Y, & Z axis protection.

Extreme All Metal Mounts

Extreme all metal mounts offer exceptional reliability and long life. These arts are ideal for isolating against shock and vibration in severe environments.


oC.

Compact design, from 6mm high. Typical shock specs: Mil-STD 810, EG 13A, SEFT001, VG95332 Mil-S-167,

Supersoft Urethane Bushes

Using 2 bushings together or a bushing & washer(s), you can create a floating bolt that isolates the unit from metal-to-metal contact.


oC.

Suitable for compression, sheer & tension loading. Load ranges: 2kgs - 22kgs.

Industrial Mounts

Suitable for a wide range of applications offering excellent shock, vibration & noise reduction being transmitted to surrounding equipment.

Load ranges: 50kgs - 3000kgs. Excellent dynamic performance for frequencies greater that 7Hz. Built in buffers to prevent horizontal movement.

A comprehensive range of anti-vibration products. For use in the

commercial, industrial, aerospace and military applications.

www.shockandvibration.co.uk

Elite Shock and Vibration

Pressfin Heatsinks

30-40% more efficient than di-cast aluminium heat sinks.

Manufactured from AI99,0-99 pure aluminium.

Thermal Tapes

Thermally conductive adhesive tapes.

Role or sheet formats.

Thermal Phase Change

Phase change interface materials.

Thermal Paste - for use on applications such as:

Hi-performance CPU, chipsets, mobile electronic appliances,

power conversion and amplification modules.

Graphite Materials

Available in sheet or role form.

Excellent replacements for thermal greases and phase change materials.

Filler Pads - for use on applications such as:

Hi-performance CPU, chipsets, mobile electronic appliances,

power conversion and amplification modules.

www.elitethermalmanagement.co.uk

Contact Details

Elite EMC Ltd Elite Shock and Vibration Elite Thermal Management

12 Station Road, Marston Green, Birmingham, B37 7AS. United Kingdom

Telephone : +44 (0)121 288 0543

Email: [email protected]

www.eliteemc.com

www.shockandvibration.co.uk

www.elitethermalmanagement.co.uk

* Elite Shock & Vibration and Elite Thermal Management are Trading divisions of Elite EMC Ltd

Elite Thermal Management

A comprehensive range of Thermal Management products. For use

in the commercial, industrial, aerospace and military applications.

elite emc elite shock and vibration...

Documents