86 Tel: +1.�14.7�9.9191 • +1.800.288.2726 • Fax: +1.�14.7�9.5880 • www.tapcoinc.com

BUCKET ELEVATOR SPECIFICATION FORM1 OF 2

1.CurrentBucketSize:_________________________________________

2.CurrentBucketStyle:_____________________Material______________

3.BucketManufacturer:________________________________________

4.BucketSpacingonBelt:______________________________________

5.NumberofBucketRows:_____________________________________

6.ProductBeingElevated:______________________________________

7.ProductDensity(CubicFoot):__________________________________

8.MoistureContent:____________________________________________

9.OilorFatContent:___________________________________________

10.ParticleSize:______________________________________________

11.ProductTemperature:_______________________________________

12.HeadPulleyDiameter:______________________________________

13.HeadPulleyFaceWidth:______________________________________

14.HeadShaftDiameter:_______________________________________

15.HeadShaftRPM:__________________________________________

16.MotorHorsepower:_________________________________________

17.BootPulleyDiameter:_______________________________________

18.FeedInlet,UporSide:_______________________________________

19.FeedInlet,OpeningDimensions:________________________________

20.BucketElevatorManufacturer:________________________________

21.RequiredCapacity:_________________________________________

22.CurrentCapacity:__________________________________________

Company: ________________________________________Contact:____________________________

Address:_____________________________________________________________________________

Phone: _____________________Fax:_____________________E-mail:___________________________

Up-Leg Bonnet

Down-Leg Discharge Bonnet w/ Internal Wear

Liner

Head Shaft and Bearing

Head Section

Discharge Throat and Throat Plate

Elevator Belt and Buckets

Elevator Leg Casing and Trucking

Boot Section

Up-Leg Inlet Hopper

Boot Shaft and Take-Up Bearing

Boot Clean-Out slide

Head Pulley

InspectionDoor

87Tel: +1.�14.7�9.9191 • +1.800.288.2726 • Fax: +1.�14.7�9.5880 • www.tapcoinc.com

BUCKET ELEVATOR SPECIFICATION FORM2 OF 2

23.HeightofElevator:______________________________________________________

24.Depth of Leg Casing:___________________________________________________

25.SpacingBetweenLegCasings:____________________________________________

27.OverallWidth ofElevator:________________________________________________

28.Depth of Bonnet:_______________________________________________________

29.WidthFromHeadShaft toThroat inlet:_____________________________________

30.DimensionsofDischargeSpout:___________________________________________

31.DistanceFromHeadShaftCenterlineDowntoTopofDischargeThroat:____________

32.DistanceFromHeadShaftCenterlineDownToDischargeSpout:_________________

33. Height of Up-Leg Inlet Hopper:___________________________________________

34.HeightFromBottomofElevatortoBottomofUp-LegInletHopper:________________

35.Depth of Up-Leg Inlet Hopper:____________________________________________

36.Height of Down-Leg Inlet Hopper:_________________________________________

37.HeightFromBottomofElevator toBottomofDown-Leg InletHopper:____________

38. Depth of Down-Leg Inlet Hopper:_________________________________________

39.HeightFromBottomofElevator toBootShaft:_______________________________

2�

24

25

27

28

29

�0

�1�2

��

�4

�5

�6

�7

�8

�9

CIRCLEHEADPROFILE:

Company: ________________________________________Contact:____________________________

Address:_____________________________________________________________________________

Phone: _____________________Fax:_____________________E-mail:___________________________

A B C D E FOTHER