electrochemical deposition of organic-inorganic...
TRANSCRIPT
![Page 1: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/1.jpg)
MATLS 701 Seminar
Electrochemical Deposition of Organic-Inorganic
Coatings with Advanced Functionality for
Biomedical Applications
Imran Deen
Supervisor: Dr. Igor Zhitomirsky
October 7, 2011
1
![Page 2: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/2.jpg)
Outline
• Introduction ▫ What is an orthopaedic implant? ▫ Project Background/Motivation
• Literature Review ▫ Materials Used ▫ Current Technology/Drawbacks
• Objective • Approach & Methodology
▫ Advantages ▫ Experimental Techniques
• Results & Discussion • Summary
2
![Page 3: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/3.jpg)
What is an Orthopaedic Implant? • Medical devices used to replace or fix parts
of the skeletal system ▫ Used mainly in the case of osteoarthritis
(degenerative joint disease), but can also be used to mend broken bones
• Orthopaedic implants must be able to: ▫ Match the composition and structure of bone ▫ Be well-tolerated by the body ▫ Withstand cyclic loading in everyday use
• Biofunctionality ▫ Ability of the device to perform desired
function ▫ High mechanical properties (yield strength,
ductility, fatigue strength, etc.) ▫ Not as severe as those found in other
engineering applications
• Biocompatibility ▫ Acceptance of materials with the body ▫ Promotes growth/adhesion of environment
3
![Page 4: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/4.jpg)
Project Background • Many different materials are used for orthopaedic implants
• Implant-tissue response varies depending on material:
▫ Toxic material – surrounding tissue dies
▫ Bioinert material – fibrous tissue forms
▫ Bioactive material – promotes bone growth/tissue adhesion
Bioreabsorbable material – the surrounding tissue replaces it
• Films deposited on materials show great promise in terms of
biocompatibility and biofuncionality
▫ Can meet all the criteria necessary of implantation
▫ Very versatile
• New and advanced bioactive materials can be used to create the next
generation of biomedical implants!
4
![Page 5: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/5.jpg)
Current Technology Used
Materials used in medical implants
Metals
Cobalt-chromium based alloys
Titanium alloys
Iron-chromium alloys (316L SS)
Glass/Ceramics
Bioglass
Alumina
Zirconia
Hydroxyapatite
Polymers
Chitosan
Hyaluronic acid
Alginic acid
5
![Page 6: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/6.jpg)
Bio-ceramics Hydroxyapatite (HA) • Bioactive calcium
phosphate ceramic ▫ Ca10(PO4)6(OH)2
• Osteoconductive - promotes bone growth along surface
• Well-suited for bone implants ▫ Similar composition ▫ Biocompatability ▫ Osteoconductivity
• Used as bio-ceramic coatings and bone fillers
6
Hydroxyapatite-coated implants
![Page 7: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/7.jpg)
Bio-polymers
• A natural, anodic, polysaccharide found in skin, joints and cornea.
• Supports progenitor cell development ▫ Cells proliferate and
differentiate into appropriate phenotypes
▫ Restore damaged/missing tissue
• Associated with inflammation regulation, control of tissue functions
• Assists in regenerative repair
7
Structure of Hyaluronic Acid
Sources of
Hyaluronic
Acid in the
body
Vitreous humor
95% Hyaluronic acid
Hyaluronic acid (HYH)
![Page 8: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/8.jpg)
Bio-polymers Chitosan (CHIT) • A natural, cationic, polysaccharide
▫ Derived from the deacetylation chitin
▫ Similar in structure to cellulose
▫ Soluble in acidic environments, maintains
structure in basic/neutral environments
• Does not cause allergic
reaction/rejection, breaks down to
amino sugars
▫ Reabsorbed by body
• Possesses antimicrobial properties
• Excellent film-forming properties, used
in tissue scaffolding, biosensors
implants, etc.
▫ Cationic in nature
8
Structure of chitosan
Chitosan is derived from the chitin
in shrimp and other crustaceans
![Page 9: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/9.jpg)
New Bio-materials Chiral Polymers • Poly-L-Ornithine (PLO)
• Poly-L-Lysine (PLL)
• Used as coating agents to promote cell
adhesion
▫ Surface charge, ligands, microstructure, surface roughness all factors controlling cell adhesion
• PLL provides perm-selectivity in
microcapsules
▫ Cell microencapsulation and transplantation.
• PLO coated microcapsules are
mechanically stronger, provide better
perm-selectivity than PLL
9
Poly-L-ornithine
Poly-L-lysine
![Page 10: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/10.jpg)
New Bio-materials
10
7 2 9 pH ζ
SiO2
Al2O3
+
-
Loading with anionic drugs
- - - - - - - - - - -
+ + + + + + + + + + +
SiO2 layer
Al2O3 layer
SiO2 layer
+ + + + + + + + + + +
Al2O3 layer Anionic
drug
Zeta potential vs. pH
HNTs CNTs
ID/length 15 nm/1000 nm 2 nm/1000 nm
Compatibility biocompatible toxic
Price $4 per kg $500 per kg
Availability thousand tons grams
• Al2Si2O5(OH)4·nH2O, • Charge difference
between SiO2 and Al2O3
▫ facilitates loading with anionic drugs (e.g. salicylate)
Comparison of HNT and CNT Halloysite Nanotubes (HNT)
![Page 11: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/11.jpg)
Bone Structure • Porous organic-inorganic composite
▫ 56–68% apatites
▫ 32–44% organics
• Recent discovery (2007) showed that
bone is composed of organic and mineral
components with a polysaccharide layer
as an interface between the two
• Polysaccharides are most closely bound
to minerals
▫ Central role in biomineralization
▫ Modulate mineral growth and
crystallinity
11
Collagen fibril composed of collagen
molecules and bone crystals
(Kobayashi, 2010) Multi-layer structure of bone components
Organic phase (collagen)
Interface (polysaccharide)
Inorganic phase (mineral)
![Page 12: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/12.jpg)
Drug Delivery • Microencapsulated chitosan
microspheres have previously been used for drug delivery ▫ Developed using layer-by-layer
(LbL) technique ▫ Physical, chemical properties can
be controlled
12
SEM pictures of a loaded chitosan
microparticle (Ko et al. 2002)
Formation of polyelectrolyte hollow capsules
via the LbL assembly (Johnston et al, 2006)
• Formed by consecutive
deposition of polymers onto
colloidal particles, which is then
removed.
• Release rate was adjustable
depending on amount of
polymer used
![Page 13: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/13.jpg)
FGM & Multilayer Coatings
• Coating can be modified to suit multiple needs using layers ▫ Creation of a gradient in the composition profile
• Multiple layers, each made up of different materials ▫ Advanced functions ▫ Drug delivery ▫ Anti-microbial agents
13
Transition layer loaded with drugs & antimicrobial
agents
High degree of biocompatibility/bioactivity or
bioreabsorbability
High adhesive property + biocompatibility
substrate
Schematic illustration of
FGM (Wang et al., 1998)
![Page 14: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/14.jpg)
First look at current fabrication processes
14
![Page 15: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/15.jpg)
Current Methods of Fabrication • Problems related to sintering of ceramic coatings
▫ Sintering shrinkage, cracking, diffusion of components, chemical reactions with substrate, substrate degradation at elevated temperatures
▫ Microstructure of sintered HA differs from natural HA
• Would result in decomposition of HNT • Formation of chiral surfaces problematic • Unable to replicate FGM/multilayer
Problems to be addressed: • Possibility of incorporation of functional biomaterials
▫ Proteins, drugs, antimicrobial agents
• Possibility of fabrication of composites, multilayer and FGM coatings
• Control of microstructure coating similar to natural material
15
![Page 16: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/16.jpg)
Electrophoretic Deposition (EPD) • Charged particles or polymer macromolecules in solvent
• Electrophoresis charged particles move towards electrode
• Particles coagulate on electrode form coherent deposit
Characteristics of EPD
• Low cost
• Room temp
• Simple
• Scaleable
• Complex surfaces
• Fast
• Control properties
16
Schematic of EPD cell showing
cathodic deposition
DC cathode anode
Electrogenerated base
2H2O + 2e- → H2 + 2OH-
Electrogenerated acid
2H2O O2 + 4H+ + 4e-
![Page 17: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/17.jpg)
Goals • Develop films with advanced functionality for
biomedical applications
▫ EPD of bioactive polymers and halloysite nanotubes
for controlled release of drugs and antimicrobial agents
• EPD of composite, multilayer and FGM coatings
▫ CHIT-HNT/CHIT-HA
▫ HYH-HNT/HYH-HA
• EPD of chiral biopolymers and composites
• Investigate different factors controlling the coating
microstructure, kinetics of deposition and deposition
mechanism.
17
![Page 18: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/18.jpg)
18
![Page 19: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/19.jpg)
Approach and Methodology
Materials used in medical implants
Metals
316L SS
Ceramics
HNT
HA
Polymers
CHIT
HYH
PLL
PLO
• Used alone, materials have
significant drawbacks
▫ Metals susceptible to
degradation and rejection
▫ Polymers, ceramics lack
strength/ductility
• Combine metal base with
ceramics and polymers
• Create implant with necessary
properties
▫ Biocompatability and
biofunctionality
19
Substrate Coating materials
![Page 20: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/20.jpg)
Approach and Methodology • Develop process for EPD of HNT-polymer composites and
chiral polymers
▫ No need to sinter end product
• Investigate the effects of concentration, additives and
dispersants
▫ Influence stability of suspension (no agglomeration)
▫ Determine different morphologies
• Investigate the deposition of new bio-polymers/ceramics
▫ Mechanics/kinetics of deposition
▫ Properties of film (e.g. corrosion in SBF, adhesive tests)
• Drug delivery capabilities
▫ Use of HNT for drug delivery using inner tube for loading drug
▫ Modify release rate base on concentration of polymer, viscosity of fluid
• Use EPD for multilayer/FGM coatings
20
![Page 21: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/21.jpg)
Experimental Techniques • Scanning Electron Microscopy (SEM), Transmission
Electron Microscopy (TEM) ▫ Analyse morphology, structure, thickness
• Thermogravimetric and Differential Thermal Analysis (TGA/DTA) ▫ Analyse composition
• X-Ray Diffraction (XRD) ▫ Analyse composition
• Quartz Crystal Microbalance (QCM) ▫ Measure deposition yield
• Electrochemical testing in simulated body fluids ▫ Measure corrosion protection
21
![Page 22: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/22.jpg)
EPD of Polymers Reaction in solution Reaction at electrode
CHIT–NH2 + H3O+ CHIT–NH3
+ + H2O CHIT–NH3+ + OH− CHIT–NH2 +H2O
HYH-OH + OH- HYH-O- + H2O HYH-O- + H3O+ HYH-OH + H2O
PLO–NH2 + H3O+ PLO–NH3
+ + H2O PLO–NH3+ + OH- PLO-NH2 + H2O
PLL–NH2 + H3O+ PLL–NH3
+ + H2O PLL–NH3+ + OH- PLL-NH2 + H2O
PAA–COOH + OH- PAA–COO- + H2O PAA–COO-+H3O+ PAA-COOH +H2O
22
soluble insoluble
![Page 23: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/23.jpg)
TEM of Halloysite Nanotubes
23
A B
C
![Page 24: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/24.jpg)
24
0.5 g/L
CHIT
0.3 g/L
HNT
0.5 g/L
CHIT
0.6 g/L
HNT
Comparison of CHIT-HNT film at (a) 5000X (b) 30000X (c) 5000X (d) 30000X
![Page 25: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/25.jpg)
25
0.5 g/L
HYH
0.3 g/L
HNT
0.5 g/L
HYH
0.6 g/L
HNT
Comparison of HYH-HNT film at (a) 5000X (b) 30000X (c) 5000X (d) 30000X
A B
C D
![Page 26: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/26.jpg)
26
Comparison of CHIT-HNT-HA film at (a) 5000X (b) 3000X (c) 5000X (d) 30000X
0.5 g/L
CHIT
1.0 g/L
HA
0.3 g/L
HNT
0.5 g/L
CHIT
1.0 g/L
HA
0.6 g/L
HNT
![Page 27: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/27.jpg)
Deposition/Analysis of CHIT-HNT Films
27
Deposition of (a) 0.1 g/L CHIT
(b) 0.1 g/L CHIT +0.05 g/L HNT
(c) 0.1 g/L CHIT +0.10 g/L HNT
solution measured using QCM XRD analysis of (a) as-received
HNT (b) as-received HA (c) pure
CHIT film (d) CHIT-HNT film
(e) CHIT-HNT-HA film
DTA/TGA of (a) as-received
HNT (b) film prepared from
0.5 g/L CHIT + 0.3 g/L HNT
solution
a
a
b b
(002) (300)
(002) (300)
Increasing concentration
![Page 28: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/28.jpg)
28
XRD analysis of (a) as-received HNT (b)
as-received HA (c) pure HYH film (d)
HYH-HNT film (e) HYH-HNT-HA film
DTA/TGA of (a) as-received HNT
(b) film prepared from 0.5 g/L HYH +
0.3 g/L HNT solution
a
a
b b
Deposition/Analysis of HYH-HNT Films
(002)
(300) (002)
(300)
![Page 29: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/29.jpg)
29
1 μm 500 nm
A B
C D
PAA films with (a) 0.1 g/L HNT (b) 0.3 g/L HNT (c) 0.6 g/L HNT. (d) DTA/TGA of 1
g/L PAA + 0.6 g/L HNT
F
F
S
S 1 μm
![Page 30: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/30.jpg)
30
Comparison of (a) 2 g/L PLO, 2 g/L HA, (b) 2 g/L PLO (c) 2 g/L PLL, 2 g/L HA films
A B
C
![Page 31: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/31.jpg)
31
CHIT-HNT-HA (a) single layer (b) multilayer (c-d) alternating layer films
A B
C D
![Page 32: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/32.jpg)
Summary • Demonstrated the feasibility of using EPD to deposit
organic-inorganic coatings containing HNT
• Multilayer coatings of CHIT-HA-HNT are possible
• Testing shows coatings contain properties similar to bone
• EPD was used to successfully deposit PLL & PLO
Future Work
• Continue investigating FGM coatings ▫ Incorporate chiral polymers into FGM coatings
• Attempt to incorporate drugs into coatings, investigate release
• Continue testing under physiological conditions
32
![Page 33: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/33.jpg)
Acknowledgements • My supervisor, Dr. Igor Zhitomirsky
• Steve Koprich, Chris Butcher, Wen He
Gong and the staff of the BIMR
• NSERC
• My colleagues in the lab
33
Thank You!
![Page 34: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/34.jpg)
References Agnihotri, Sunil A., Nadagouda N. Mallikarjuna, and Tejraj M. Aminabhavi. 2004.
“Recent advances on chitosan-based micro- and nanoparticles in drug delivery.” Journal of Controlled Release 100 (1) (November 5): 5-28. doi:10.1016/j.jconrel.2004.08.010.
AZoM. 2011. Hydroxyapatite - Hydroxyapatite Coatings An Overview. AZoM - The A to Z of Materials. http://www.azom.com/article.aspx?ArticleID=1405.
Van der Biest, Omer O., and Luc J. Vandeperre. 1999. “ELECTROPHORETIC DEPOSITION OF MATERIALS.” Annual Review of Materials Science 29 (August): 327-352. doi:10.1146/annurev.matsci.29.1.327.
Corni, Ilaria, Mary P. Ryan, and Aldo R. Boccaccini. 2008. “Electrophoretic deposition: From traditional ceramics to nanotechnology.” Journal of the European Ceramic Society 28 (7): 1353-1367. doi:10.1016/j.jeurceramsoc.2007.12.011.
Davis, Joseph R., and A. S. M. International. 2003. Handbook of materials for medical devices. ASM International, December.
Dickerson, James H., and Aldo R. Boccaccini. 2011. Electrophoretic Deposition of Nanomaterials. Springer, September 30.
Hamaker, H. C. 1940. “Formation of a deposit by electrophoresis.” Transactions of the Faraday Society 35: 279. doi:10.1039/tf9403500279.
34
![Page 35: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/35.jpg)
References Hench, L. L., and Julian R. Jones. 2005. Biomaterials, artificial organs and tissue
engineering. CRC Press.
Johnston, Angus P.R., Christina Cortez, Alexandra S. Angelatos, and Frank Caruso. 2006. “Layer-by-layer engineered capsules and their applications.” Current Opinion in Colloid & Interface Science 11 (4) (October): 203-209. doi:10.1016/j.cocis.2006.05.001.
Ko, J.A, H.J Park, S.J Hwang, J.B Park, and J.S Lee. 2002. “Preparation and characterization of chitosan microparticles intended for controlled drug delivery.” International Journal of Pharmaceutics 249 (1-2) (December 5): 165-174. doi:10.1016/S0378-5173(02)00487-8.
Kobayashi, Shirō. 2010. Biopolymers: Lignin, Proteins, Bioactive Nanocomposites. Springer, September 17.
Lieberman, Jay R., and Gary E. Friedlaender. 2005. Bone regeneration and repair: biology and clinical applications. Humana Press.
Lvov, Yuri M., Dmitry G. Shchukin, Helmuth Mo hwald, and Ronald R. Price. 2008. “Halloysite Clay Nanotubes for Controlled Release of Protective Agents.” ACS Nano 2 (5) (May 1): 814-820. doi:10.1021/nn800259q.
Pang, X., and I. Zhitomirsky. 2008. “Electrodeposition of hydroxyapatite–silver–chitosan nanocomposite coatings.” Surface and Coatings Technology 202 (16) (May 15): 3815-3821. doi:10.1016/j.surfcoat.2008.01.022.
35
![Page 36: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/36.jpg)
References Prince, Charles. 2004. “Roles of hyaluronan in bone resorption.” BMC
Musculoskeletal Disorders 5 (1): 12. doi:10.1186/1471-2474-5-12.
SAHFOS. 2010. SAHFOS - Home of the Continuous Plankton Recorder. Sir Alister Hardy Foundation for Ocean Science. http://www.sahfos.ac.uk/.
Sarkar, Partho, and Patrick S Nicholson. 1996. “Electrophoretic Deposition (EPD): Mechanisms, Kinetics, and Application to Ceramics.” Journal of the American Ceramic Society 79 (8) (August 1): 1987-2002. doi:10.1111/j.1151-2916.1996.tb08929.x.
Wang, Y., K.A. Khor, and P. Cheang. 1998. “Thermal Spraying of Functionally Graded Calcium Phosphate Coatings for Biomedical Implants.” Journal of Thermal Spray Technology 7 (March): 50-57. doi:10.1007/s11666-006-5003-9.
Yuan, Peng, Peter D. Southon, Zongwen Liu, Malcolm E. R. Green, James M. Hook, Sarah J. Antill, and Cameron J. Kepert. 2008. “Functionalization of Halloysite Clay Nanotubes by Grafting with γ-Aminopropyltriethoxysilane.” The Journal of Physical Chemistry C 112 (40) (October 9): 15742-15751. doi:10.1021/jp805657t.
Zhitomirsky, Igor. 2002. “Cathodic electrodeposition of ceramic and organoceramic materials. Fundamental aspects.” Advances in Colloid and Interface Science 97 (1-3) (March 29): 279-317. doi:10.1016/S0001-8686(01)00068-9.
36
![Page 37: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/37.jpg)
Technique Thickness Advantages Disadvantages
Dip Coating 0.05-0.5mm • Inexpensive
• Coatings applied quickly
• Coat complex substrates
• Requires high sintering temperatures
• Thermal expansion mismatch
Sputter
Coating
0.02-1mm • Uniform coating thickness
on flat substrates
• Line of sight technique
• Expensive
• Time consuming
• Cannot coat complex substrates
PLD 0.05- 5mm • Same as for sputter coating • Same as for sputter coating
Hot Pressing
and Hot
Isostatic
Pressing
0.2-2.0mm • Produces dense coatings • HP cannot coat complex substrates
• High temperature required
• Thermal expansion mismatch
• Expensive
• Removal of encapsulation material
EPD 0.1-2.0mm • Uniform coating thickness
• Rapid deposition rates
• Can coat complex substrates
• Difficult to produce crack-free coatings
• Requires high sintering temperatures
Thermal
Spraying
30-200mm • High deposition rates • Line of sight technique
• High temperatures induce decomposition
• Rapid cooling amorphous coatings
Sol-Gel <1mm • Can coat complex shapes
• Low processing temp.
• Relatively cheap
• May require controlled atmosphere
processing
• Expensive raw materials
37
(AZoM, 2011)
![Page 38: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/38.jpg)
Top-down Approach • Experiment with the deposition of known materials
▫ Chitosan, hyaluronic acid, hydroxyapatite, SS
• Attempt to co-deposit new materials
▫ PLO, PLL, halloysite
▫ Use materials whose properties will complement each other
• Examine coatings using different experimental techniques
▫ Determine which parameters are best suited for deposition
▫ Determine feasibility
• Investigate if coatings with different functions can be created
▫ Drug delivery, FG coatings
• Test coatings in SBF, physiological conditions
▫ Investigate whether or not they fulfill biofunctions (drug delivery,
corrosion protection)
38
![Page 39: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/39.jpg)
Deposition
• Chitosan is protonated and dissolved in acidic solutions, become a cationic polymer: CHIT–NH2 +H3O
+ → CHIT–NH3+ +H2O
• Hyaluronic acid forms an anionic species: HYNa HY- + Na+
• Electric field provides electrophoretic motion of charged macromolecules to the anode or cathode, insoluble deposit forms: ▫ Cathodic reaction:
2H2O + 2e−→ H2 +2OH− CHIT–NH3
+ + OH− → CHIT–NH2 + H2O ▫ Anodic reaction:
2H2O O2 + 4H+ + 4e- HY- + H+ HYH
▫ Charged polymers carry larger, neutral, molecules to be deposited
39
Charged polymers and neutral
ceramics deposited cathodically
![Page 40: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/40.jpg)
𝑉𝑎 = ∆𝜙1 + 𝐼𝑅𝑑𝑒𝑝𝑑1 + 𝐼𝑅𝑠 𝑑 − 𝑑1 + ∆𝜙2
40
∆𝜙1𝑒
∆𝜙𝑑𝑒𝑝
𝐸 =d𝜙
𝑑𝑥
∆𝜙2𝑒
x
𝜙
Electrode spacing, d
Film thickness, d1
Rion
Rpolymer
Rdeposit
∆𝜙1 ∆𝜙2 Va
Va = the applied potential
I = current
Rd and Rs = resistance per unit length
d = electrode separation
d1 = thickness of the deposit
∆i = potential drop at one electrode
Potential change in EPD cell (Van der
Biest and Vandeperre, 1999)
Resistances in EPD cell (Van der Biest
and Vandeperre, 1999)
![Page 41: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/41.jpg)
DLVO Theory • Developed by Derjaguin, Landau,
Verwey and Overbeek • Describes relationship between
stability of suspension using repulsive/attractive energies
• Dominant, attractive energy (LvdW)
𝑉𝐴 = −𝐴𝑎
12𝐷
▫ A = Hamaker’s constant
▫ D = separation of particles
▫ a = particle radius
• Repulsive energy (coulombic double-layer repulsion)
𝑉𝑅 = 2𝜋𝜀𝜀0𝑎𝜓2 ln 1 + 𝑒−𝜅𝐻
• The energy of interaction VT of two particles
𝑉𝑇 = 𝑉𝐴 + 𝑉𝑅
41
Energy of interaction between two
particles (Sarkar and Nicholson, 1996)
![Page 42: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/42.jpg)
Schematic of the deposition mechanism by
lyosphere distortion and thinning (Sarkar
and Nicholson, 1996)
• Double-layer (DL) distortion as particle moves
▫ DL is thinner ahead of the particle
▫ Counter ions move along with particle, could recombine
• Incoming particles also have thinned DL
▫ Repulsion is decrease
▫ Particles overcome repulsive barrier
42
![Page 43: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/43.jpg)
Deposition Kinetics of Composite Films • Deposition described by the Haymaker equation:
𝑀 = 𝜇𝐸𝑡𝑆𝐶𝑠 ▫ Cs = concentration of colloidal particles ▫ E = electric field ▫ t= Deposition time ▫ μ = particle mobility
• However, does not take moving boundary into account
𝑀 = 𝜇𝐸𝑡𝑆𝐶𝑠𝐶𝑐𝐶𝑐 − 𝐶𝑠
▫ Cc is the particle concentration in the deposit
• For two-component system with chitosan:
𝑀 = 𝜇𝐸𝑡𝑆𝐶𝑠 1 −𝐶𝑠𝐶𝑐
−1
+ 𝜇′𝐸𝑡𝑆𝜓𝑠 1 −𝜓𝑠𝜓𝑐
−1
▫ μ' = CHIT mobility ▫ Ψs is the concentration of CHIT in suspension ▫ Ψc is the concentration of CHIT in the deposit
43
![Page 44: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/44.jpg)
Deposition Kinetics • 1940, deposition described by the Haymaker equation
𝑀 = 𝜇𝐸𝑡𝑆𝐶𝑠 ▫ Cs = concentration of colloidal particles
▫ E = electric field
▫ t = Deposition time
▫ μ = particle mobility
▫ S = surface of electrode
• Given many variables held constant, we have
𝑀 = 𝜇𝐸𝑆𝐶𝑠𝑐𝑜𝑛𝑠𝑡𝑎𝑛𝑡
𝑡 = 𝑘𝑡
▫ k = μESCs
• Mass deposited is linearly dependant on time
44
![Page 45: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/45.jpg)
• Model ignore the change of concentration during deposition
• 1994, Zhang et al. derived kinetic equation incorporating change
𝑑𝑤 = 𝑓𝑢𝑑𝑆𝐶(𝑡) = 𝑓𝑢 𝑑𝑆𝐶 𝑡 𝑑𝑡
▫ u = average velocity of particles
▫ C(t) = concentration of particles in suspension
▫ f = efficiency factor (i.e if all particles is suspension deposit, then f = 1; otherwise f < 1)
• If suspension is homogeneous, no change in particles concentration due to sedimentation,
only due to EPD, then mass balance condition can be imposed
𝐶 0 = 𝑤0 𝐶 𝑡 = 𝑤0 − 𝑤(𝑡) /𝑉
▫ w0 = initial weight of the powder in the suspension
▫ V = volume of suspension
• The following solution is obtained
𝑤 𝑡 = 𝑤0 1 − 𝑒−𝑘𝑡
d𝑤
d𝑡= 𝑤0𝑘𝑒
−𝑘𝑡
• k = kinetic parameter (k = Sfu/V)
Deposited weight (fraction of initial weight of
solid in the suspension) as a function of time
under constant current conditions (Sarkar and
Nicholson, 1996)
∆– experimental points
(–) – calculated results
45
![Page 46: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/46.jpg)
Normalized current IN and kIN as a
function of time during constant voltage
deposition (Sarkar and Nicholson, 1996)
Deposited weight (fraction of initial
weight of solid in the suspension) as a
function of time under constant voltage
(Sarkar and Nicholson, 1996)
◊ – experimental points
(- -) – calculated results
(–) – new calculated results
• There was still disagreement between calculated and experimental results ▫ At higher times, calculated weight as significantly higher than actual ▫ Constant value of k cannot be used ▫ In a constant-voltage process, current decreases during deposition
46
![Page 47: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/47.jpg)
d𝑤 = 𝑓 d𝑆𝑢 𝑡 𝐶 𝑡 𝑑𝑡 = 𝑓 d𝑆𝜇𝐸𝐸 𝑡 𝐶 𝑡 d𝑡
d𝑤 = 𝑘′ 𝐸 𝑡 𝑤0 − 𝑤(𝑡) d𝑡, 𝑘′ =𝑆𝑓𝜇𝐸𝑉 (kinetic parameter)
▫ E(t) = voltage drop/unit length of suspension normal to depositing electrode
• As deposit forms, it replaces an equal thickness of suspension • Total resistance of system changes
𝐿𝑒𝑞𝑢𝑖𝑣 = 𝐿 + 𝐿𝑑𝑒𝑝 𝑅𝑟−1 , 𝐿𝑑𝑒𝑝 =𝑑𝑒𝑝𝑜𝑠𝑖𝑡 𝑣𝑜𝑙𝑢𝑚𝑒
𝑎𝑟𝑒𝑎=𝑤 𝑡 /𝜌
𝑆
▫ Lequiv = suspension with equal resistance ▫ L = distnace between electrodes ▫ Ldep = thickness of deposit
▫ Rr = ratio of deposit resistivity to that of suspension
▫ ρ = deposit density
𝐿𝑒𝑞𝑢𝑖𝑣 = 𝐿 +𝑤 𝑡 /𝜌
𝑆𝑅𝑟−1 = 𝐿 + 𝑤 𝑡 𝑅′, 𝑅′ =
𝑅𝑟−1
𝜌𝑆, ∴ 𝐸 𝑡 =
𝑉𝑎𝐿𝑒𝑞𝑢𝑖𝑣
=𝑉𝑎
𝐿 + 𝑤 𝑡 𝑅′
d𝑤 = 𝑘′ 𝑉𝑎
𝐿 + 𝑤 𝑡 𝑅′𝑤0 − 𝑤(𝑡) d𝑡
𝑅′𝑤 𝑡 + 𝑅′𝑤0 + 𝐿 ln𝑤0 − 𝑤 𝑡
𝑤0+ 𝑘′𝑉𝑎𝑡 = 0
47
![Page 48: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/48.jpg)
Deposited weight (fraction of initial
weight of solid in the suspension) for
different conditions (Sarkar and
Nicholson, 1996)
• Curve I – Constant current/constant
concentration
𝑤 𝑡 = 𝑘𝑤0𝑡
• Curve II – Constant current/variable
concentration
𝑤 𝑡 = 𝑤0 1 − 𝑒−𝑘𝑡
• Curve III – Constant voltage/constant
concentration
𝑅′𝑤2 + 𝐿𝑤(𝑡) + 𝑘′𝑤0𝑉𝑎𝑡 = 0
• Curve IV – Constant voltage/variable
concentration
Different Deposition Kinetics
48
𝑅′𝑤 𝑡 + 𝑅′𝑤0 + 𝐿 ln𝑤0 − 𝑤 𝑡
𝑤0+ 𝑘′𝑉𝑎𝑡 = 0
![Page 49: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/49.jpg)
New Bio-materials Halloysite Nanotubes (HNT) • Al2Si2O5(OH)4·nH2O,
▫ n=0 or 2
• Dual-layer aluminosilicate
▫ Octahedral alumina
▫ Tetrahedral silica
▫ Layer of water
▫ Siloxane SiO4 surface
• Lattice mismatch in the alumina/silica layers creates strain
▫ Curving occurs, creates hollow tube structure.
• 30-50 nm OD and 1-3 μm in length
49
Schematic diagrams of (a) the crystalline structure of halloysite-(10
Å) and (b) the structure of a halloysite nanotube (Yuan et al., 2008)
![Page 50: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/50.jpg)
New Bio-materials
50
Release curves of drugs from halloysite
and crystals in water, pH 7 (Lvov et al.,
2008)
• Can trap different reagents within
either the inner tube or void spaces
• Outermost surface composed of silica,
and inner of alumina
▫ At pH < 8.5, ζ-potential of silica is
negative, and alumina is positive
▫ Positive inner surface enables
loading of negative macromolecules
• Controlled drug release, significantly
better than microcrystals
▫ Initial burst within 10 min, then
prolonged 8-10 h release
▫ A linear release rate can be achieved by
increasing the viscosity of the loading
solvent
![Page 51: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/51.jpg)
Electrophoretic Deposition (EPD) • EPD of cathodic polymer
▫ Protonation
▫ Electrophoresis
▫ Charge compensated
▫ Neutralized
▫ Coherent deposit
51
Low pH High pH
Anode Cathode
+ -
Acidic solution, pH < pI
+
+
+
+
+
+
+ +
+ +
+
+
+
+
+ +
+
+
+
+
+
+
+
+ +
+ +
+
+
+
+
+ +
+
+
Base generation:
Electrogenerated base
2H2O + 2e- → H2 + 2OH-
Base generation:
Electrogenerated acid
2H2O O2 + 4H+ + 4e-
![Page 52: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/52.jpg)
Electrophoretic Deposition (EPD) • EPD of cathodic polymer
▫ Protonation
▫ Electrophoresis
▫ Charge compensated
▫ Neutralized
▫ Coherent deposit
• EPD of anodic polymer
▫ Deprotonation
▫ Electrophoresis
▫ Charge compensated
▫ Neutralized
▫ Coherent deposit
52
Low pH High pH
Anode Cathode
+ -
Acidic solution, pH > pI
-
-
-
-
-
-
- -
- -
-
-
-
-
- -
-
-
-
-
-
-
-
- -
- -
-
-
-
-
- -
-
-
Base generation:
Electrogenerated base
2H2O + 2e- → H2 + 2OH-
Base generation:
Electrogenerated acid
2H2O O2 + 4H+ + 4e-
![Page 53: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/53.jpg)
Quartz Crystal Microbalance
∆𝑓 = −2𝑓02∆𝑚
𝐴 𝜇𝑞𝜌𝑞 → ∆𝑚𝑎𝑠𝑠 = −Δ𝑓 ×
𝐴 𝜇𝑞𝜌𝑞
2𝐹𝑞2
▫ ∆mass = Mass change ▫ ∆f = frequency change ▫ μq = AT-cut quartz crystal constant (2.947×1011 g/cm·sec2) ▫ ρq = Quartz crystal density (2.648 g/cm3) ▫ Fq = Reference frequency (9.00 MHz) ▫ A = Quartz crystal surface area (0.196 cm2)
∆𝑚𝑎𝑠𝑠 = −Δ𝑓 ×0.196 2.947 × 1011 × 2.648
2 × 9 × 106 2
= −Δ𝑓 × 1.06878 × 10−9 ∆𝑚𝑎𝑠𝑠 = −1.06878 × 10−9Δ𝑓
53
![Page 54: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/54.jpg)
Ag-Chit/HA-Chit laminates using EPD (Pang and Zhitomisrky, 2008)
54
![Page 55: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/55.jpg)
55 0.5 g.L CHIT - 0.6 g/L HNT Film
![Page 56: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/56.jpg)
56
1 μm
500 nm
500 nm
500 nm
A B
C D
Comparison of PAA films with (a) 0.1 g/L HNT (b) 0.3 g/L HNT (c-d) 0.6 g/L HNT
F F
F
S S
S
![Page 57: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/57.jpg)
57
1 μm
0.5 g/L CHIT
0.5 g/L CHIT, 0.3 g/L HNT
0.5 g/L CHIT, 1.0 g/L HA
CHIT /CHIT- HNT/CHIT- HA Film
![Page 58: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/58.jpg)
58
1 μm
HA layers HNT layers
0.5 g/L CHIT - 0.3 g/L HNT +
0.5 g/L CHIT - 1/0 g/L HA Film
![Page 59: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/59.jpg)
59
1 μm
HA layers HNT layers
0.5 g/L CHIT - 0.3 g/L HNT +
0.5 g/L CHIT - 1/0 g/L HA Film
![Page 60: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/60.jpg)
60
500 nm 2 g/L PLL - 2 g/L HA Film
![Page 61: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/61.jpg)
61
500 nm 2 g/L PLO + 2 g/L HA Film
![Page 62: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/62.jpg)
DTA & TGA Data
(a) as-received HNT
(b) film prepared from 0.5 g/L CHIT + 0.3 g/L HNT solution
(c) film prepared from 0.5 g/L HYH + 0.3 g/L HNT solution
(d) film prepared from 1.0 g/L PAA + 0.6 g/L HNT solution
62
b
a
b
a
d
d
c
c
![Page 63: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/63.jpg)
DTA & TGA Data
(a) as-received HNT
(b) film prepared from 0.5 g/L CHIT + 0.3 g/L HNT solution
63
b a
b a
![Page 64: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/64.jpg)
DTA & TGA Data
(a) as-received HNT
(b) film prepared from 0.5 g/L HYH + 0.3 g/L HNT solution
64
b a
b a
![Page 65: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/65.jpg)
65
Acetyl group
Primary amine
group
Secondary amine
group
Becomes
protonated
![Page 66: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/66.jpg)
Siloxane • A chemical compound composed of R2SiO
▫ R is a hydrogen atom or hydrocarbon group
▫ -Si-O-Si-O- form branched/unbranched backbone
▫ Belongs to organosilicon class or compounds
• Silica particles and Siloxane networks investigated for
bio-nanohybrid networks
66
Stephanopyxis turris diatom (SAHFOS, 2010) Siloxane structure in S. turris
(Ruiz-Hitzky et al., 2008)
![Page 67: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/67.jpg)
Materials selection chart of tensile strength vs. Young’s modulus (Hench and
Jones 2005)
67
![Page 68: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/68.jpg)
Body Environment
• Body fluids have an effect similar to warm aerated
seawater
▫ Can contain up to 100 mL Cl- per liter or water
• Body pH is usually 7.2-7.4,
▫ Can vary between pH=4-9, especially after surgery if in
the case of an infection
• Temperature is 37°C
68
![Page 69: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/69.jpg)
Ionic compositions of blood plasma, interstitial fluid, and intracellular fluid. (Davis and ASM International 2003)
69
![Page 70: Electrochemical Deposition of Organic-Inorganic …coursenotes.mcmaster.ca/701-702_Seminars/2011-2012/Imran_Deen... · Electrochemical Deposition of Organic-Inorganic Coatings with](https://reader031.vdocuments.mx/reader031/viewer/2022021622/5b968c7d09d3f2816c8b8e71/html5/thumbnails/70.jpg)
70
Hierarchical structure of bone (Kobayashi, 2010)