pdl · pdl electrical products are designed and ... stages and right through to introduction to ......
TRANSCRIPT
PDL
PDL ELECTRICAL PRODUCTS
THE ULTIMATECHOICE IN DESIGNAND INNOVATIONOF ELECTRICALPRODUCTS.
Switch on to NewStandards in Elegance
Gold
Silve
r
Whit
e
Beige
Page 1
The PDL 1600 Designer Series is a significant
breakthrough in style and design excellence - a perfect
combination of good looks and feature-rich
practicality that brings new heights in elegance.
From the range of high quality plate finishes to the
stylish, chamfered edges, PDL’s 1600 Designer Series
will blend in beautifully with any decor. The high
quality finish - unhindered by any visible screw caps -
combines the practical advantages of a shiny, highly polished
switch plate with the fashionable, unobtrusive appearance.
Designed in consultation with practising electricians and
endorsed by leading architects, the PDL 1600 Designer
Series is a uniquely elegant addition to today’s decor
and design.
Grey
Light
Blue
Light
Gre
en
Mag
nolia
Page 2
Over seventy practising international electrical contractors wereinvolved in setting the design and feature specifications of thePDL 1600 Designer Series.
Behind the switch plates are a host of innovative time-savinginstallation and safety features built into the design. Extensivetesting at an independent Telarc-registered laboratory hasincluded electrical and mechanical endurance switching –equivalent to 100 years of ordinary use – bears testimony to thesuperiority of the PDL switch.
The 1600 Designer Series utilises the world-leading innovationof the front-loading 1500 Series module and is compatible withthe full range of 1500 Series specialty modules.
Designed by New Zealanders for international markets, the new1600 Designer Series is superior in so many ways.
Opposite are just ten reasons why PDL’s 1600 Designer Seriesis the obvious choice for contractors and architects!
The Obvious Choice…
Modules resistfrontal impact
PDL’s 1600 Series switchmodules cannot be pushedback into the mounting box ifthey are struck or pushedfrom the front. Made ofpolycarbonate, a high-impactengineering resin.
in at least ten waysInnovative Front-loading modules
The innovative front-fittingswitch modules of PDL’s 1600Series are clipped into apatented face plate and canonly be removed by using aspecial module ejecting tool.Modular system providesversatility.
International StandardsThe 1600 Designer Series aremanufactured to British Standardsin an ISO 9002 environment.
Vandal proof screwoptionAn optional screw can be usedto secure cover plate for addedsecurity.
10AX Switch ratingAs the 1600 Series utilisesthe proven 1500 Seriesmechanism, light switchesare rated at 10AXFlourescent.
Clip-on cover platesA range of clip-on coversconceal mounting screws andsimplify finishing anddecorating. Cover plates canbe removed for wall painting.
Choice of coverplates in highquality finishesCover plates come in twohighly popular metalfinishes – Gold and silver –plus seven designer colourswith an elegant, gloss finishthat’s easy to clean.
Switch identificationoptionsSwitches can have theirfunctions identified using anyone of a series of high-qualityidentification labels placedunderneath a transparentwindow. No need for engravedmodules.
1
3
4
5
6
8
9
72
High quality glossfinishAll cover plates feature anunobtrusive, aesthetically-pleasing gloss finish whichis practical and easy toclean.
Patented earthterminalPDL socket outlets have apatented earthing systemwhich is unique in that themounting screw contactsthe earth directly, not viathe normal hollow rivet.
Page 4
10
The world’s first front-fittingswitch module system
PDL’s front fitting module system is a patented world
first. Unlike other modular ranges of domestic
switchgear, PDL’s modules clips into place through the
front of the switchplate.
This unique safety feature prevents modules being
knocked back into the wall cavity from the frontal impact,
making them ideal for in use in Government buildings,
state houses, universities, schools and any commercial
installation where damage caused by the user has to be
PDL Electrical Products are designed and engineered to ISO 9001 in New Zealand byPDL Industries Engineering Centre and manufactured to ISO 9002.
corrected by costly maintenance schemes. It also
overcomes common domestic installation problems
such as TV coaxial modules being pushed back into the
wall cavity by coax plugs.
Once fitted, the modules may only be removed from the
switchplate with the aid of a special module ejector tool
supplied. This unique feature maximises end user
safety and prevents low profit return calls.
PDL ELECTRICAL PRODUCTS
Page 6
Index1600 Series
Switches PagesPlate Switches 9Dimmer Switches 9-10Fan Speed Controller 10Control Switches 10-11Cooker Control Units 11Specialty Switches 12
ModulesSwitch Modules (Size 1) 13-14Control Switch Modules 14Illuminated Modules 15Non Switch Modules 15Communication Modules 15-16Data Modules 16Dedicated Switch Modules 16
Sub Plates & Cover PlatesFlush Plates 17Flush Cover Plates 17-18Blank Plates 18
Fused Connection Units1600 Series Fused Connection Units 18
Cord Outlets1600 Series Cord Outlet 18
Power Socket Outlets (SP) Single Pole& (DP) Double Pole
Switched Socket Outlets 13A 19Switched Socket Outlets 15A 1913A Unswitched Socket Outlets 1915A Unswitched Socket Outlets 2016A Universal Socket Outlet 20Double Pole Switched Sockets 20China Socket 21Hybrid Socket 21
Communication OutletsCommunication Outlets 21
Techincal DataWiring Diagrams 23-29
Index by Catalogue NumberProducts in Alpha Numerical order 30
All product development at PDL Industries is controlled by a quality managementsystem accredited to ISO 9001 and certified by IANZ (Telarc) New Zealand andASTA UK. ASTA is a significant UK-based certification authority.
Independent third party quality systems accreditation reinforces, from aninternational perspective, the excellence and quality of PDL products.
PDL Industries uses anindependent Telarc-registeredelectrical laboratory for itsproduct testing to ensurecontinuous quality.
PDL Electrical Products are designed and engineered to ISO 9001 in New Zealandby PDL Industries Engineering Centre and manufactured to ISO 9002.
Page 7
Quality Management Recognisedby IANZ (Telarc) and Asta
Independent third party testing,your guarantee of qualityThe design and manufacture of products by PDL Industries has always been backed by third partytesting and development facilities.
PDL uses Parkside Laboratories, an independent Telarc-registered electrical laboratory for itsproduct testing and Telarc-endorsed test reports to ensure international product acceptance.
The laboratory, in addition to ensuring technical quality levels are maintained on existing products, isan essential part of the development of new products, ensuring that PDL maintains the highestpossible standards as the latest technological ideas are introduced into our product ranges.
This support for product development and an emphasis on testing and retesting prior to productrelease illustrates PDL Industries’ strong product development discipline, taking the concepts ofquality design well into the early design stages and right through to introduction to manufacturing.
Page 8
PDL’s 1600 Series - the world’s first front fitting
modular system of British standard electrical
wiring accessories, designed for maximum
installer versatility, specifier reliability and end
user safety.
The flush mounted 1600 Series form PDL
includes 13A and 15A switched and unswitched
socket outlets and modular lighting switches
plus specialist communication and illuminated
modules.
PDL’s 1600 Series is moulded from a high-
impact polycarbonate formulated exclusively for
PDL, giving a contemporary gloss finish that is
stylish while being extremely wear-resistant in all
domestic and commercial situations. PDL’s 1600
Series switches comply with BS 3676 Pt1: 1996.
Socket outlets comply with BS 1363 Pt2: 1995
and BS546:1950.
1600 Series FlushWiring Accessories
PLATE SWITCHES
1681/1W
1681/1W1 GANG 1 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.10AX Fluorescent.
1681/2W1 GANG 2 WAY SPAs for 1681/1W.
1682/1W
1683/1W
1684/1W
Page 9
SWITCHES
Switches comply with Standards:- BS 3676 Pt1:1996
1681/1W BELL
1681/1W PRESS
1685
1693
1682/1W2 GANG 1 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.10AX Fluorescent.
1682/2W2 GANG 2 WAY SPAs for 1682/1W.
1683/1W3 GANG 1 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.10AX Fluorescent.
1683/2W3 GANG 2 WAY SPAs for 1683/1W.
16931 GANG 2 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.40-500W Incandescent.
1681/1W BELL1 GANG SPRING RETURN1 WAY SP markedwith BELL symbolPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.
1681/2W BELL1 GANG SPRING RETURN2 WAY SP markedwith BELL symbolAs for 1681/1W BELL.
1681/1W PRESS1 GANG SPRING RETURN1 WAY SP markedwith PRESS wordingPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.
1681/2W PRESS1 GANG SPRING RETURN2 WAY SP markedwith PRESS wordingAs for 1681/1W PRESS.
16851 GANG INTERMEDIATE SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.
DIMMER SWITCHES
1684/1W4 GANG 1 WAY SPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.10AX Fluorescent.
1684/2W4 GANG 2 WAY SPAs for 1684/1W.
Page 10
1694
DIMMER SWITCHES cont...
16942 GANG DIMMER 2 WAYPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each.250V a.c.40 - 500W Incandescent.
1691K
1691K1 GANG DIMMER 1 WAYPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-1.5mm sq cables each.250V a.c.1000W Incandescent.
FAN SPEED CONTROLLER
1697
16971 GANG FAN SPEEDCONTROLLERPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-1.5mm sq cables each. 240V a.c. 50Hz 400VA.
1698
16982 GANG FAN SPEED CONTROLLERPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-1.5mm sq cables each. 240V a.c. 50Hz 400VA.
1620
1620N
CONTROL SWITCHES
Switches comply with Standards:- BS 3676 Pt1:1996
16201 GANG 1 WAY DPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 20A Resistive.Marked 20A.
1620AC1 GANG 1 WAY DPmarked AIR CONDITIONERAs for 1620.
1620WH1 GANG 1 WAY DPmarked WATER HEATERAs for 1620.
1620N1 GANG 1 WAY DPwith NEON INDICATORPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 20A Resistive.Marked 20A.
1620NAC1 GANG 1 WAY DPwith NEON INDICATORmarked AIR CONDITIONERAs for 1620.
1620NWH1 GANG 1 WAY DPwith NEON INDICATORmarked WATER HEATERAs for 1620.
1632
16321 GANG 1 WAY DPPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 32A Resistive.Marked 32A.
1632AC1 GANG 1 WAY DPmarked AIR CONDITIONERAs for 1632.
1632WH1 GANG 1 WAY DPmarked WATER HEATERAs for 1632.
Switches comply with Standards:- BS 4177:1992
1645NC
CONTROL SWITCHES cont...
1646NC
1645C
16451 GANG 1 WAY DPmarked ON, OFFPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-4.0mm sq cables each or 3-6.0mm sq cables each or 1-16.0mm sq cables each.250V a.c. 45A Resistive.
1645C1 GANG 1 WAY DPmarked ON, OFF, COOKERAs for 1645.
1645AC1 GANG 1 WAY DPmarked ON, OFF, AIRCONDITIONERAs for 1645.
1645WH1 GANG 1 WAY DPmarked ON, OFF, WATER HEATERAs for 1645.
1645N1 GANG 1 WAY DPwith NEON INDICATORPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-4.0mm sq cables each or 3-6.0mm sq cables each or 1-16.0mm sq cables each.250V a.c. 45A Resistive.
1645NC1 GANG 1 WAY DPwith NEON INDICATORmarked ON, OFF, COOKERAs for 1645N.
1645NAC1 GANG 1 WAY DPwith NEON INDICATORmarked ON, OFF,AIR CONDITIONERAs for 1645N.
1645NWH1 GANG 1 WAY DPwith NEON INDICATORmarked ON, OFF, WATER HEATERAs for 1645N.
COOKER CONTROL UNITS
Switches comply with Standards:- BS 4177:1992Switched Socket complies with Standards: - BS 1363 Pt2:1995
1646C1 GANG 1 WAY DP SWITCHwith 1 GANG SPSWITCHED SOCKETPlate size: 149 x 89 x 12.5mmMounting centres: 120mmTerminals accommodate: 4-4.0mm sq cables each or 3-6.0mm sq cables each or 1-16.0mm sq cables each.DP Switch 250V a.c. 45A Resistive.SP Switched Socket 250V a.c. 13A
1646NC1 GANG 1 WAY DP SWITCHwith 1 GANG SPSWITCHED SOCKETwith NEON INDICATORSAs for 1646C.
1632N
1632N1 GANG 1 WAY DPwith NEON INDICATORPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 32A Resistive.Marked 32A.
1632NAC1 GANG 1 WAY DPwith NEON INDICATORmarked AIR CONDITIONERAs for 1632N.
1632NWH1 GANG 1 WAY DPwith NEON INDICATORmarked WATER HEATERAs for 1632N.
Page 11
1682/2W PAC
Page 12
1682/2W PAC2 GANG 2 WAY SP SWITCHwith SPRING RETURNAIR CONDITIONERPlate size: 89 x 89 x 12.5mmMounting centres: 60.3 mmTerminals accommodate: 4-1.5mm sq cables each 250V a.c.
Used to activate Air ConditionerMotor Starters
1683/2W PNAC
1683/2W PNAC3 GANG 2 WAY SP SWITCHwith SPRING RETURNand NEON INDICATORAIR CONDITIONERPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mmTerminals accommodate: 4-1.5mm sq cables each. 250V a.c.
Used to activate Air ConditionerMotor Starters
SPECIALTY SWITCHES
1585M
1585MINTERMEDIATE SPSWITCH MODULE4 Terminals accommodate: 4-1.5mm sq cables each.250V a.c.
Page 13
MODULES
SWITCH MODULES (SIZE 1)Switches comply with Standards:- BS 3676Pt1:1989
1580M
1580M1 WAY SP SWITCH MODULE2 Terminals accommodate: 4-1.5mm sq cables each. 250V a.c.10AX Fluorescent.
1581M
1581M2 WAY SP SWITCH MODULE3 Terminals accommodate: 4-1.5mm sq cables each. 250V a.c.10AX Fluorescent.
1580M FAN
1580M FAN1 WAY SP SWITCH MODULEmarked with FAN symbolTerminals accommodate: 4-1.5mm sq cables each.Some of the other options:LIGHT, FRIDGE, MICROWAVE,HEAT, H.W.S. (Hot Water System).ON/OFF, AUTO/MAN, TV.
Other marking are available ifvolumes are sufficient.250V a.c.10AX Fluorescent.
1580M LIGHT1 WAY SP SWITCH MODULEmarked with LIGHT symbolAs for 1580M FAN.
1580M BELL1 WAY SP SWITCH MODULEmarked with BELL symbolAs for 1580M FAN.
1580M PRESS1 WAY SP SWITCH MODULEmarked with PRESS wordingAs for 1580M FAN.
(Fan symbol)
(Light symbol)
1581M BELL
1581M BELLSPRING RETURN 2 WAY SPPRESS SWITCH MODULEmarked with BELL symbolBiased N/O.3 Terminals accommodate: 4-1.5mm sq cables each.250V a.c.
1581M PRESS
1581M PRESSSPRING RETURN 2 WAY SPPRESS SWITCH MODULEmarked with PRESS wordingBiased N/O.3 Terminals accommodate: 4-1.5mm sq cables each.250V a.c.
581M16HF
581M16HFSWITCH MODULE SPwith HINGED FLAP
Rating: 230V – 240V a.c.,50Hz, 2-Wayswitch module.
Page 14
SWITCH MODULES (SIZE 1) cont...Switches comply with Standards:- AS3133.
1580M16N
1580M16N1W SWITCH MODULE SPwith NEON INDICATOR250V a.c.16A resistive.Neon flying leads can beconnected to provide “ON”indication, location ofswitch when “OFF”or permanently “ON”.
1587M10
1587M10DP SWITCH MODULE250V a.c.10AX Inductive to AS3133.
CONTROL SWITCH MODULESSwitches modules comply with Standards:- AS1431 Pt1.
1581M16PBS
1581M16PBS2 WAY SP SHROUDED PUSHBUTTON SWITCH MODULEN/C or N/O.Terminals accommodate: 4-1.5mm sq cables each.250V a.c. Operational current 4A AC11.415V a.c. Operational current 2A AC11.
1581M16PBM
1581M16PBM2 WAY SP MUSHROOM PUSHBUTTON SWITCH MODULEN/C or N/O.Terminals accommodate: 4-1.5mm sq cables each.250V a.c. Operational current 4A AC11.415V a.c. Operational current 2A AC11.
Page 15
ILLUMINATED MODULES
1515M
1515MOPAL SYMBOLINDICATOR MODULETerminals accommodate: 4-4.0mm sq cables each, for direct connection to neon.250V a.c.Standard symbols available:
NO SMOKING
SHOWER ON
WAITER
ROOM SERVICE
Other markings are available ifvolumes are sufficient.
1510MN
1510MNNEON INDICATOR MODULE250V a.c.
2 Terminals accommodate:4-1.5mm sq cables each,for direct connection.
Standard colours available:Red, Green, Blue, Amber andClear.
1510ML12LAMP INDICATOR MODULE12V a.c./d.c.As for 1510MN.
1510ML24LAMP INDICATOR MODULE24V a.c./d.c.As for 1510MN.
1593M
1593MDIMMER MODULETerminal connection: Flying leads.240V a.c. 40-500W Incandescent
1588M
1588MBUZZER MODULETerminal connection: Flying leads.240V a.c.Noise level not less than 70dB.
1530M
1530MCORD OUTLET“BELL MOUTH” cable entry accommodates flexible cords up to 10 mm diameter,250V a.c.
1507M
1507MTV COAXIAL OUTLET MODULEmarked “TV”Suitable as TV and FM outlets.Solderless clamp terminals,Suits 75 ohm coaxial cable.PAL-type socket outlet.
1506MFM COAXIAL OUTLET MODULEmarked “FM”As for 1507M.
COMMUNICATION MODULES
1597M
1597MFAN SPEED CONTROLLER MODULETerminal connection: Flying leads.240V a.c. 50Hz 400VA.
NON-SWITCH MODULES
615MST
615MST‘ST’ TYPE FIBRE OPTICCONNECTOR MODULE‘ST’ multi-mode throughconnector.Comes with two yellow dustcovers in place.
615MF
615MF‘F’ TYPE CONNECTOR MODULE‘F’ Female/Female throughconnector.
DEDICATED SWITCH MODULES
Terminals accommodate 4 x 1.5mm cables each or 2 x 2.5mm cables each.
687M4
687M3ROTARY SWITCH MODULERating: 230V - 240V a.c.,Three-position switch module: 0, 1, 2.Other configurations available. eg AUTO, OFF, MAN
687M4ROTARY SWITCH MODULERating: 230V - 240V a.c.,Four-position switch module: 0, 1, 2, 3.Other configurations available.
1519 M6
1519 M66-WAY FCC RJ12 TEL SOCKETMODULE with IDCTERMINALS
DATA MODULES
619MDL
619MDLSame as 619MD with lid.
619MD
619MDRJ45 category 5 telephonesocket module.IDC terminals.
1516M
1516MBNC SOCKET50 Ohm.Solder terminals.
1541RM
1541RMRCA AUDIO CONNECTIONSOCKET coloured REDSolder type terminals.
1541BMRCA AUDIO CONNECTIONSOCKET coloured BLACKAs for 1541RM.
Page 16
COMMUNICATION MODULES cont . . .
1683CP
1683CPTHREE APERTURE COVERPLATE
1684CP
1684CPFOUR APERTURE COVERPLATE
Page 17
FLUSH COVER PLATES ONLY
PLATES
1681CP
1681CPONE APERTURE COVERPLATE
1682CP
1682CPTWO APERTURE COVERPLATE
1683
1683THREE APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.
1684
1684FOUR APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.
FLUSH PLATES
1681
1681ONE APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.
1682
1682TWO APERTUREPlate size: 89 x 89 x 12.5mmMounting centres: 60.3mm.
Page 18
1650
1651
16501 GANG BLANK PLATEPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.
16512 GANG BLANK PLATEPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.
FUSED CONNECTION UNITS
1625
16251 GANG UNSWITCHEDwith CORD CLAMPand BOTTOM FLEX OUTLETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 13A Resistive.2A, 5A Versions also available.
Switched sockets comply with Standards:- BS 5733.
1626
16261 GANG SWITCHED DPwith CORD CLAMPand BOTTOM FLEX OUTLETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 13A Resistive.2A, 5A Versions also available.
1626N1 GANG SWITCHED DPwith CORD CLAMP andBOTTOM FLEX and NEONINDICATOR(See 1626 for details)
CORD OUTLETS
1636
16361 GANG CORD OUTLETUNSWITCHEDwith TERMINAL BLOCKPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 3-2.5mm sq cables each or 2-4.0mm sq cables each.250V a.c. 20A.
Switched sockets comply with Standards:- BS 5733.
1650CP
1651CP
1650CP1 GANG BLANK COVER PLATE
1651CP2 GANG BLANK COVER PLATE
FLUSH COVER PLATES cont . . . BLANK FLUSH PLATES
13A UNSWITCHED SOCKET OUTLETS
1660
Switched sockets comply with Standards:- BS 546:1950.
16601 GANG UNSWITCHEDPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
1668
16682 GANG UNSWITCHEDPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
15A SWITCHED SOCKET OUTLETS
1667
16671 GANG SPPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 15A.
1667N
1667N1 GANG SPwith NEON INDICATORPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 15A.
SOCKET OUTLETS
13A SWITCHED SOCKET OUTLETSSwitched sockets comply with Standards:- BS 1363 Pt2:1995
1661
16611 GANG SPPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
1661N
1661N1 GANG SPwith NEON INDICATORPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
Page 19
1662
16622 GANG SPPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
1662N
1662N2 GANG SPwith NEON INDICATORPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
Page 20
1666
16661 GANG UNSWITCHEDPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 15A.
15A UNSWITCHED SOCKET OUTLET
1669
1669UNIVERSAL SOCKET OUTLETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.2 Terminals accommodate: 4-1.5mm sq cables each.250V a.c. 10/16A.
For use with BS, USA and CEE Standard plugs.
16A UNIVERSAL SOCKET OUTLET
1662DPN
1662DPN2 GANG DPwith NEON INDICATOR(See 1662DP details).
1662DPNE2 GANG DPwith NEON INDICATORAND SEGREGATED EARTH(See 1662DP details)
1662DPS
1662DPS2 GANG DPwith SURGE PROTECTORPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.(Replacement module SPM600).
1662DPNS2 GANG DP with NEON ANDSURGE PROTECTOR(Other details as 1662DPS).
1662DPNSE2 GANG DP with SURGEPROTECTOR and NEONINDICATOR andSEGREGATED EARTH(Other details as 1662DPS).
1662DPSE2 GANG DP with SURGEPROTECTOR andSEGREGATED EARTH(Other details as 1662DPS).
SPM600
SPM 600MOV replacement module forsurge protected power points.Maximum Dischargecurrent 6kA.Maximum OperatingVoltage 275V AC.Clamp Voltage 710V@50A.
1661DP
1661DP1 GANG DPPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
1661DPE1 GANG DPwith SEGREGATED EARTH(See 1661DP details).
1661DPN
1661DPN1 GANG DPwith NEON INDICATOR(See 1661DP details)
1661DPNE1 GANG DPwith NEON INDICATOR ANDSEGREGATED EARTH(See 1661DP details).
1662DP
1662DP2 GANG DPPlate size: 149 x 89 x 12.5mm.Mounting centres: 120mm.3 Terminals accommodate: 4-2.5mm sq cables each or 3-4.0mm sq cables each.250V a.c. 13A.
1662DPE2 GANG DP WITHSEGREGATED EARTH(See 1662DP details).
DOUBLE POLE SWITCHED SOCKETS
Page 21
COMMUNICATION OUTLETS
1606
16061 GANG FM COAXIAL OUTLETSuitable for FM applications.Suits 75 ohm Coaxial.Clamp terminals: Solderless.Suits Plug type PAL.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.
16071 GANG TV COAXIAL OUTLETAs for 1606, but suitable for TV applications.
1608
16081 GANG TV/FMCOAXIAL OUTLETBoth modules suitable for TV and FM applications.Suits 75 ohm Coaxial.Clamp terminals: Solderless.Suits Plug type PAL.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.
1609
1609ISOLATED TV/FMDIPLEXERCan be used as an outlet on master aerial systems.Suits 75 ohm Coaxial.Suits Plug type PAL.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.
1638/6W
1617S
1618
1638/6W1 GANG 6 WAYTELEPHONE OUTLETTermination: ScrewsSuits Plug Type RJ11Includes Spring ReturnShutter.Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.
1617S1 GANG BT TELEPHONEMASTER OUTLETTermination: ScrewsPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Includes Spring Return Shutter.Suits Plug Type BT.
1618S1 GANG BT TELEPHONESECONDARY OUTLETAs for 1617S.
16171 GANG BT TELEPHONEMASTER OUTLETTerminals accommodate: 2-0.4mm sq cables each. or 2-0.5mm sq cables each.Termination: IDC (InsulationDisplacement Connectors).Plate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.Includes Spring Return Shutter.Suits Plug Type BT.
16181 GANG BT TELEPHONESECONDARY OUTLETAs for 1617.
1670/15
1670/151 GANG UNSWITCHEDSOCKETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.15 AMP 250VAC.
CHINA SOCKET
1679
16791 GANG HYBRID SOCKETPlate size: 89 x 89 x 12.5mm.Mounting centres: 60.3mm.10A/16A 250VAC.
HYBRID SOCKET
TECHNICAL DATA WIRING DIAGRAMS
Page 22
Cat 1580M 1 Way Switch Module
Rear view of switch modules
N
L
L2
L1
L2
L1
LOAD
Cat 1580M BELL 1 Way Spring Return Switch Module
Diagram shows Normally Open (NO) connection
N
L
L2
L1 LOAD
Cat 1585M Intermediate Switch Module
Rear view of switch modules
N
LOAD
L
1581M 1585M intermediate switch 1581M
Any number of intermediate switches can be wired between the 2 way switches
L3
L2
L1
L3
L2
L1
3
12
4
1
3
24
L
1
L
CN
Load
L
1
L
CN
Load
Cat 1580M16N 1 Way Neon Switch Module
Neon permanently ON Neon ON, switch OFF (locator) Neon ON, switch ON (indicator)
Rear view of switch modules
L
1
L
CN
Load
Neonwires
Neonwires
Neonwires
LOOP1
CL
Cat 1581M 2 Way Switch Module
Rear view of switch modules
N
L
L3
L2
L1
L3
L2
L1
L2
L1
L3
LOAD
Rear view of switch modules
Diagram shows Normally Closed (NC) connection
Cat 1581M BELL 2 Way Spring Return Switch Module
Diagram shows Normally Open (NO) connection
N
L
L3
L2
L1 LOAD
N
L
L3
L2
L1 LOAD
L2
L1
L3
WIRING DIAGRAMS
Page 23
L2
Cat 1581M Master Switching for Security
Cat 1593 & 1593M Dimmer (1 way Circuit)
L2
1581MLamp Lamp
L
N
Yellow wire
White wire
1593MDimmerL1
L3
Cat 1593 & 1593M Dimmer (2 way Circuit)
1581M
1581M
Lamp LampL
N
Brown wire
White wire
1593MDimmer
L2
L3
L1 L1
L2
L3
1581M
L2
L3
L1L
N
1581M1581M
L2
L3
L1
1581M
L2
L3
L1
Lamp Lamp Lamp
L2
L3
L1
1581M
Rear view of switch
Diagram shows Normally Open (NO) connection
N
L
2
1
CLOAD
L
Diagram shows Normally Closed (NC) connection
N
L
2
1
C
L
LOAD
Cat 1581M16PBS, 1581M16PBP & 1581M16PBM Push Button Switch Modules
LOOP1
CL
2
Cat 1520N & 1532N (with Neon)Cat 1520 & 1532 Double Pole 1 Way Switches
Rear view of switch modules
L1L1 L3
L1 L3
L1
L3
L3
L1
L1
L3
L3
L1 L3
L1 L3
WIRING DIAGRAMS
Page 24
Segregated Earth
12V/24V
N
L
Cat 1515M, 1510MN 250V Indicator Modules
N
L
2
1
2
1
250V AC
Rear viewof module
Rear viewof module
Cat 1510ML12, 1510ML24 12/24V Indicator Modules
L2
L3
L2
L3
Cat 1626 Fused Connection Unit with DP Switch
Rear view of switchN FEED
N LOAD
L FEED
L LOAD
Fuse
These products provide facilities for “Clean Earth Connection”.
The socket outlet earth being independent of other connections.
Cat 1646C Cooker Unit
Cat 1646NC Cooker Unit with Neon
LIVE LOAD
LIVE FEED
NEUTRAL FEED
EARTHEARTH
NEUTRAL LOAD
N1
N2
L1
L2
N1 L1
N2 L2
LIVE LOAD
LIVE FEED
NEUTRAL FEED
EARTHEARTH
NEUTRAL LOAD
N1
N2
L1
L2
N1 L1
N2 L2
LFEED
NFEED
NLOAD
LLOAD
Page 25
WIRING DIAGRAMS
Cat 1645 1 Gang 1 Way DP marked On, Off Switch (45A)
Cat 1638/6W 1 Gang 6 Way Telephone Outlet
Cat 1645N 1 Gang 1 Way DP with Neon Indicator Switch (45A)
Cat 1661 1 Gang Single Pole Switched Socket
L1
L2
N1
N2
N FEED
EARTH EARTH
L FEED
N LOAD L LOAD
L1L1
L2
N1
N2
WHITE
BLACK
RED
BLUE
YELLOW
GREEN
L1L1
L2
N1
N2
L1
L2
N1
N2
N FEED
EARTH EARTH
L FEED
N LOAD L LOAD
N
L
LIVE
NEUTRAL
EARTH
N
L
WIRING DIAGRAMS
Page 26
Cat 1661DP 1 Gang Double Pole Switched Socket
Cat 1662 2 Gang Single Pole Switched Socket
Cat 1662DP 2 Gang Double Pole Switched Socket
Cat 1662DPE 2 Gang Double Pole Switched Socket with Segregated Earth
Cat 1661DPE 1 Gang Double Pole Switched Socket with Segregated Earth
LN
LIVE
NEUTRAL
EARTH
NL
EARTH
LIVE
NEUTRAL
EARTH
NL
LN
LIVE
NEUTRAL
EARTH
N
LE
L
N
E
LN
LIVE
NEUTRAL
EARTH
N L
EARTH
N L
E
LIVE
NEUTRAL
EARTH
N L
Page 27
Cat 1662DPSE 2 Gang Double Pole Switched Socket with Surge Protector and Segregated Earth
Cat 1670 1 Gang Unswitched Socket
Cat 1679 1 Gang Hybrid Socket
Cat 1662DPS 2 Gang Double Pole Switched Socket with Surge Protector
L
E
N
N
LIVE
NEUTRAL
EARTHL
EARTH
AP E NAP
E
N
LIVE
EARTH
NEUTRAL
N
NL
L
LIVE
EARTH
N
NL
L
NEUTRAL
N
LIVE
NEUTRAL
EARTHL
L
E
N
WIRING DIAGRAMS
Page 28
1509
TV/FM Aerial
Building
1509
1509
Signal3
Rear view of module
Cat 1509M TV/FM Diplexers used in Multi-Outlet Installation
Cat 1507M & 1506M TV/FM Connection
Braid rolled back
3
1507M/1506M module
Rear view of module
8mm
Stripping guide actual size
2
15mm
1
Coaxial cable
Cat 1541RM & 1541BM Audio Connection
Solder cable to terminals.Use cable marking.Trace to ensurecorrect polarity. EARTH
7mm
Rear view of module
Stripping guide actual size
1
10mm
Coaxial cable
Braidrolledback
5mm
2
FM
TV
NOTES
Page 29
INDEX
Page 30
Cat No. Page 581M16HF 13 615MF 16 615MST 16 619MD 16 619MDL 16 687M3 16 687M4 161506M 151507M 151510ML12 151510ML24 151510MN 151515M 151516M 161519M6 161530M 151541BM 161541RM 161580M 131580M BELL 131580M FAN 131580M LIGHT 131580M PRESS 131580M16N 141581M 131581M BELL 131581M PRESS 131581M16PBM 141581M16PBS 141585M 131587M10 141588M 151593M 151597M 151606 211607 211608 211609 211617 211617S 211618 211618S 21
Cat No. Page1620 101620AC 101620N 101620NAC 101620NWH 101620WH 101625 181626 181626N 181632 101632AC 101632N 111632NAC 111632NWH 111632WH 101636 181638/6W 211645 111645AC 111645C 111645NC 111645N 111645NAC 111645NWH 111645WH 111646C 111646NC 111650 181650CP 181651 181651CP 181660 191661 191661DP 201661DPN 201661DPNE 201661DPE 201661N 191662 191662DP 201662DPN 201662DPNS 20
Cat No. Page1662DPNE 201662DPNSE 201662DPS 201662DPE 201662DPSE 201662N 191666 201667 191667N 191668 191669 201670/15 211679 211681 171681CP 171681/1W 91681/1W BELL 91681/1W PRESS 91681/2W 91681/2W BELL 91681/2W PRESS 91682 171682CP 171682/1W 91682/2W 91682/2W PAC 121683 171683CP 171683/1W 91683/2W 91683/2W PNAC 121684 171684CP 171684/1W 91684/2W 91685 91691K 101693 91694 101697 101698 10SPM 600 20
PDL Dealer:
PDL HOLDINGS LTD - THE GROUP
THE PDL GROUPOF COMPANIES
For over 60 years, the PDL Groupof Companies has built an enviable
international reputation foundedon the concept that “continuous
quality is quality you trust”.
PDL is globally recognised formanufacturing the very best in
electrical accessories, industrialswitchgear, AC variable speed
drives, custom plastic productsand electrical consumerappliances to the highest
international standards. PDLproducts are now distributed to
over 40 countries includingNew Zealand, Australia, the United
Kingdom, Europe, Asia, NorthAmerica, the Pacific and the
Middle East.
Continuous investment in researchand development has provided thePDL Group with some of the most
sophisticated world-widetechnology and this, together withinnovation, design excellence and
independent third-party qualityassurance schemes, has ensuredPDL an excellent reputation in the
international market.
The commitment to R&D hasunderpinned the current successof PDL Holdings’ nine subsidiarycompanies and their continuedfurther growth. Currently, the
Group employs 1900 people overthree continents - Australasia,Asia and Europe and has anannual turnover in excess of
$NZ350 million.
PDL GROUP PRODUCTSProducts manufactured and distributed by PDL Group companies are:
• PDL electrical wiring accessories for domestic, commercial and industrial applications,including PDL 1600 Designer Series.
• PDL Smartwires intelligent automated systems.
• PDL PIR Sensors, PDL Residual Current Devices and PDL Powerboards.
• PDL fan heaters and cooling fans.
• PDL Modempak cable management and distribution products for the Data andTelecommunications industries.
• AC Motor Speed Controllers including Xtravert, Microdrive-i, Microdrive-Eliteand Ultradrive Elite, and Nu-Start AC Motor Soft Starters.
• D-PRO Air Circuit Breakers, NFC Fuse Switch Units, Current Transformers and variousfusegear.
• Specialist plastic custom moulding including injection and blow moulded bottles, packs andclosures for all sectors of the packaging industry.
Q17347PDL 1600 3-00