electrical & portable appliance testers industrial …
TRANSCRIPT
www.emona.com.au
Portable Appliance TestersInstallation TestingSolar PV TestingThermal ImagingMultimetersClamp MetersHigh Voltage TestingCalibration Services
ELECTRICAL & INDUSTRIAL
INSTRUMENTS 2020-21 SHORT FORM
Dear Customer,
Welcome to Emona’s 2020 Electrical and Industrial Instruments shortform.
The 2020 shortform matches the product categories in our www.emona.com.au website. You can also refer to our website for: • product specifications and detailed brochures • product demonstration and training videos • software and firmware updates under the SUPPORT tab • calibration information and booking form under the CALIBRATION tab
Ordering
You can place orders on-line via our website at www.emona.com.au, or order via email, telephone or fax to your local Emona office. Payment by Mastercard, Visa and American Express is accepted. Account terms are available and subject to approval. Emona’s Standard Terms & Conditions apply.
Technical Support
Emona’s technical support and sales staff are ready to help you with your measurement needs and solutions. Our sales engineers are technically trained to support our wide range of instruments and equipment. For more information contact your Emona office or call toll free 1 800 632 953.
About Emona
Established in 1979, Emona Instruments has grown to become a leading supplier of electrical and electronic test and measuring instruments. With offices around Australia, AS/NZS ISO 9001-2008 Quality Management Requirements accreditaion, NATA traceable calibration facilities and technically qualified sales staff, you can rely on Emona for your instrumentation requirements.
Welcome
SECTION PRODUCT GROUP PAGE
i Catalogue Index i
1Portable Appliance Testers
1
2 Installation Testing 10
3 Solar PV Testing 20
4 Thermal Imaging 23
5 Multimeters 24
6 Clamp Meters 26
7 High Voltage Testing 28
8 Calibration Services 29
i • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Product Demonstration & Training Videos
Look for the VIDEO icon for products that have demonstration and training videos available. Just go to www.emona.com.au, click the VIDEOS tab at the top of the page and browse our selection of videos.
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 1
Portable Appliance TestersSeaward has been the preferred choice for professionaland high volume testing and tagging in Australia since1991.
From government departments, universities andeducational institutions through to industry, mining andtest and tag service providers, Seaward testers lead theindustry in professional testing and tagging hardware andsoftware solutions.
ProTag System Quick Facts
= Seaward portable appliance testers have been availablein Australia since 1991, with the launch of the world’sfirst data logging appliance tester, the PAT1000s.
= In 2000, Emona Instruments revolutionised testing andtagging by launching the world’s first automated testingand tag printing system, the Protag System based on theSeaward Supernova-XE appliance tester. For the firsttime in decades, users no longer had to handwritehundreds of test tags daily.
= Since 1991, over 35,000 Seaward appliances testershave been supplied in Australia.
= Since 2000, over 140 million assets have been testedand tagged using ProTag test tag printers and printedon ProTag test tags.
= Seaward Electronic was established in 1982 in DurhamEngland and all Seaward appliance testers aremanufactured in the UK.
= With over 165 employees, Seaward is representedworldwide across 60 countries with branch offices inFlorida USA and Malaysia.
= Seaward Electronic Ltd is part of the MetrawattInternational GmbH’s GMC-Instruments Group, withsales of over EUR 85 million and over 575 employees.
2 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
ProTag Systems Comparison Chart1Seaw
ard PT125 EL
ProTag PAC3760 DL
ProTag PrimeTest PRO Kit
ProTag Elite-PLUS
Tester Features:
Dis
play
LCD
LCD
Colo
ur L
CDCo
lour
LCD
Indi
catio
nPa
ss/F
ail,
Read
ing
Pass
/Fai
l, Re
adin
gPa
ss/F
ail,
Read
ing
Pass
/Fai
l, Re
adin
gKe
ypad
OO
QW
ERTY
Key
boar
dQ
WER
TY K
eybo
ard
On-
Boar
d Ca
mer
aO
OO
With
In-B
uilt
Flas
hIn
terf
aces
OSe
rial
& U
SBBl
ueto
oth
& U
SB C
able
Blue
toot
h, U
SB C
able
, USB
Stic
kEm
ail D
ata
Via
Dev
ice
OO
Andr
oid
Andr
oid
& iO
SCu
stom
isab
le T
est T
ag L
ogo
OO
PP
Pow
erBa
tter
yM
ains
or
Batt
ery
Mai
ns o
r Re
char
geab
le B
atte
ryM
ains
or
Rech
arge
able
Bat
tery
On-
Boar
d M
emor
yO
999
Test
Res
ults
Appr
ox 1
0,00
0 Te
st R
esul
tsU
p To
50,
000
Test
s, 2
,000
Pho
tos
In-B
uilt
Isol
atio
n Tr
ansf
orm
erO
PP
PTests Performed:
Clas
s I &
II A
pplia
nces
PP
PP
Lead
s &
Soc
ket P
olar
ityP
PP
PRC
D T
rip
Tim
eO
10m
A &
30m
A10
mA
& 3
0mA
10m
A &
30m
A3
Phas
e Ea
rth
& L
eaka
geO
ptio
nal P
AC-3
P Ad
apto
rO
ptio
nal P
AC-T
PL A
dapt
orO
ptio
nal P
AC-T
PL A
dapt
ors
Opt
iona
l PAC
-TPL
Ada
ptor
s3
Phas
e Ea
rth
& In
sula
tion
Opt
iona
l TPI
Ada
ptor
sO
ptio
nal T
PI A
dapt
ors
Opt
iona
l TPI
Ada
ptor
sPr
obes
& O
ptio
nal T
PI A
dapt
ors
Use
r D
efine
d In
spec
tions
OO
OP
Compliance Modules:
Exit
Ligh
ts &
Fir
e Pr
otec
tion
OO
OP
Switc
hboa
rd In
spec
tions
OO
OP
Scanner - Bluetooth:
OO
Opt
iona
l 1D
Sca
nner
2D S
cann
erTag Printer
OO
ptio
nal P
roTa
g PA
C-O
PTPr
oTag
Opt
ima
Prot
ag X
LPr
int T
ype
Ther
mal
Dir
ect
Ther
mal
Dir
ect
Ther
mal
Dir
ect
Test
Tag
Typ
eG
ener
al In
door
& O
utdo
orG
ener
al In
door
& O
utdo
orU
V/H
eat R
esis
tant
XL
Tags
Software:
OCS
V Fi
le O
utpu
tPA
TGua
rd 3
- 12
Mon
th L
icen
sePA
TGua
rd E
lite
3 - F
ull L
icen
seTe
st R
esul
t Dow
nloa
dP
PP
Asse
t Reg
iste
r U
ploa
dO
PP
Asse
t Reg
iste
r Ph
otos
OO
PAccessories:
Carr
y Ca
seO
ptio
nal
Carr
y Ca
seH
eavy
Dut
y Ru
ck S
ack
Har
d Tr
ansi
t Cas
eLe
ads
Eart
h Bo
nd, I
ECEa
rth
Bond
, IEC
Eart
h Bo
nd, I
EC, M
ains
Eart
h Bo
nd, I
EC, M
ains
Price ex GST
$749 ex GST
$2,189 ex GST
$3,999 ex GST
$7,399 ex GST
• Low Cost with Power Up/Leakage• Simple 3 Button Operation
Australia's lowest cost and easiest touse appliance tester!
Simple select one of 3 push buttons,for Class I test, Class II test andleakage test. The unit also includes amains voltage outlet voltage check toensure socket outlet safety.
Test your Class I & II appliances,extension leads and powerboardswith confidence.
PRIMETEST 125 EL Features• Tests conducted: earth continuity,
insulation resistance, leakage/powerup, polarity & mains outlet check
• Battery powered• Pass/Fail indication and readings• Test sequences for faster testing• Class I, Class II & LKG buttons • Tests leads and powerboards
• Australia’s Lowest Cost LoggingAppliance & RCD Tester
The Seaward PAC3760 DL is based onthe PAC3760 series, Australia’s mostpopular and easiest to use appliancetesters. The new PAC3760 DL nowincludes even more useful features atthe same affordable price.
The PAC3760 DL includes on-boardmemory of 999 test results,eleminating the need for writing logbooks. Conduct the test and press theSAVE button to store the result. Testresults can be downloaded via USB asa CSV file that can be opened by anyspreadsheet or database program.
PAC3760 DL Features• Tests conducted: earth continuity,
insulation resistance, Class I andClass II leakage current, MOV Class Iand Class II leakage current, polarity
• 10mA & 30mA RCD trip time tests• In-built isolation transformer• Memory 999 test results• Simple 9 push button operation• Battery & mains powered• Pass/Fail indication and readings• Senses an IEC or extension lead and
conducts a polarity test• 3 phase insulation & leakage tests
using optional PAC-TPL 3 phaseadaptor
• QWERTY Keypad - No Need forSeparate Tablet for Data Entry
The Seaward PrimeTest PRO providesusers with AS/NZS3760 test and tagtechnology that is more advancedthan any other tester on theAustralian market at such anaffordable price.
The unit is fully portable, data logging,easy to use and offers users greatvalue in a package that includes aheavy duty ruck sack.
Primetest PRO Features• Tests conducted: earth continuity,
insulation resistance, Class I andClass II leakage current, MOV Class Iand Class II leakage current, polarity
• 10mA & 30mA RCD trip time tests• In-built isolation transformer• Memory 10,000 test results• High definition colour display.• In-built QWERTY keyboard. No need
for additional tablet or mobiledevice
• USB for Data upload/download. Justplug in your USB cable to downloador back-up your data.
• Battery & mains power. Alsoautomatically charges the batterieswhenever you’re plugged into mainspower
• Android USB On-The-Go support.Email your data to the office, noadditional software license required.
• PATGuard 3 FREE 1 yearsubscription.
BASIC APPLIANCETESTERS
PrimeTest 125 ELSeaward
Ordering Code:PRIMETEST 125 EL $749 ex GST
PAC3760 DLSeaward
Ordering Code:PAC3760 DL $1,199 ex GST
PrimeTest PROSeaward
Ordering Code:PRIMETEST PRO $2,299 ex GST
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 3
Portable Appliance Testers 1SECTION INDEXBasic Appliance TestersTag Printing Appliance TestersSingle & Three Phase AdaptorsTest Tags & Log BookRCD Adaptor & Isolation TransformerMicrowave Leakage TesterAccessories
• Australia’s Lowest Price LoggingTester with Test Tag Printing
The ProTag PAC3760 DL Kit isAustralia’s lowest price loggingappliance tester and test tag printerpackage. The ProTag PAC3760 DL Kitincludes the PAC3760 DL and PAC-OPT test tag printer.
The PAC-OPT's unique "Plug N Print"operation simply requires connectionto the PAC3760 DL via serial cable,conduct your test and press the printbutton to output your test tag. Notime consuming logo set-uprequired as the PAC-OPT prints ageneric test tag.
PROTAG PAC3760 DL Features• Includes PAC3760 DL appliance
tester and PAC-OPT test tag printer• Simple “Plug N Print” operation• Printer automatically prints FAIL tag• Tags printed with tag number, test
date and test result• Printer interface via seria cable• Test tags type is OPT with 250 test
tags per roll
• Australia’s Best Value Test & TagSystem With Asset Management
The ProTag PrimeTest PRO Kit isAustralia’s best value loggingappliance tester and test tag printerpackage for professional applicationsrequiring an asset register. TheProTag PrimeTest PRO kit includeseverything you need for aprofessional system: tester, printer,software and ruck sack.
The Optima test tag printer iscustomised with your corporate logoor graphics prior to despatch. The Kitis also supplied with user training(conditions apply), guaranteeing thebest value in your test and taginvestment.
Primetest PRO Features• Tests conducted: earth continuity,
insulation resistance, Class I andClass II leakage current, MOV Class Iand Class II leakage current, polarity
• 10mA & 30mA RCD trip time tests• In-built isolation transformer• Memory 10,000 test results• High definition colour display.• In-built QWERTY keyboard. No need
for additional tablet or mobiledevice
• USB cable for upload/download. Justplug in your USB cable to downloador back-up your data.
• Battery & mains power. Alsoautomatically charges the batterieswhenever you’re plugged into mainspower
• Android USB On-The-Go support.Email your data to the office, noadditional software license required.
ProTag PrimeTest PRO Kit Features• Includes PrimeTest PRO appliance
tester and Optima test tag printer• Printer automatically prints FAIL tag• Tags printed with asset number, test
date, user name and test result• Printer interface via Bluetooth• Test tags type is OPT with 250 test
tags per roll• 1 Year License PATGuard 3 Software• Includes heavy duty PRO ruck sack
PATGuard 3 Software
PATGuard 3 is Seaward’s marketleading testing and tagging software.The included 1 Year License providesprofessional level reporting and assethistory software. After test resultdownload, PATGuard automaticallygenerates and updates the customerand test history databaseguaranteeing accountability and datareliability.
Optional Accessory
The BCS-BT is an optional bar codescanner that lets users scan test tagbarcodes to speed up re-testing.
Ordering Code:PRIMETEST PRO KIT $3,999 ex GST
Test Tags Ordering Codes:OPT YELLOW Tag Roll $31 ex GSTOPT-WHITE Tag Roll $31 ex GSTOPT-GREEN Tag Roll $31 ex GSTOPT-ORANGE Tag Roll $31 ex GSTOPT-BLUE Tag Roll $31 ex GSTOPT-RED Tag Roll $31 ex GSTOPT-BURGUNDY Tag Roll $31 ex GSTPRO-CLEAR Tag Roll $55 ex GST
Ordering Code:BCS-BT $499 ex GST
Ordering Code:PROTAG PAC3760 DL $2,189 ex GST
Test Tags Ordering Codes:OPT YELLOW Tag Roll $31 ex GSTOPT-WHITE Tag Roll $31 ex GSTOPT-GREEN Tag Roll $31 ex GSTOPT-ORANGE Tag Roll $31 ex GSTOPT-BLUE Tag Roll $31 ex GSTOPT-RED Tag Roll $31 ex GSTOPT-BURGUNDY Tag Roll $31 ex GSTPRO-CLEAR Tag Roll $55 ex GST
TAG PRINTING & ASSETMANAGEMENT
ProTag PrimeTest PRO KitEmona
ProTag PAC3760 DLEmona
LOW COST TAG PRINTINGAPPLIANCE TESTER
Portable Appliance Testers1
4 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Australia’s Most Advanced Testingand Tagging System
The ProTag Elite-PLUS is Australia’smost advanced PAT system. It notonly conducts appliance and RCDtests, but also offers user definedasset inspections and an built-indigital camera with flash, all in theone handheld tester.
ProTag Elite tests portable appliances& RCDs to AS/NZS3760, takes assetphotos, prints XL UV/heat resistanttest tags and download results to PC.
Advanced Features• High definition colour display• On-board camera for asset photos• USB cable/flash drive for data
download• Email data via android or iOS• Bluetooth interface for scanner &
printer• QWERTY keypad• 50,000 test result memory• Battery or mains powered• Exit Lights & Fire Inspection
sequences
New PLUS Features• Enhanced user interface with
Predictive Text & Auto Mode• QR code printing and new test tag
print formats• Load printer logo graphic file from
Elite tester as BMP file• New test sequences incl Socket Test• Includes Checkbox calibration
verification accessory
Electrical Test Functions• Mains supply check• IEC lead test• Earth continuity (200mA)• Insulation resistance 250V and 500V• Leakage current test• Fixed & portable 10mA/30mA RCD
test• In-built isolation transformer• 3 phase testing & test result logging
(with PAC-TPL optional adaptor)
Flexible Data Transfer & EmailingDownload results onto a USB flashdrive or via USB cable. For remoteapplications, transfer data viaBluetooth to your smartphone ortablet and email the data directly backto the office for invoicing.
Superb Software ManagementPATGuard 3 allows users to record,store and report on their PAT testingand inspections. Generate a widerange of work and asset historyreports and send automatic emailalerts when next tests are due.
ProTag XL PrinterThe ProTag XL printer utilises thermaldirect printing technology. ChooseOPTIMA (thermal direct) generalpurpose tags or XL (thermal direct)tags for all harsh environmentsoutdoors or demanding indoorapplications e.g. commercial kitchens.
BCS-BT-2D Bar Code ScannerThe BCS-BT-2D bar code scanner letsusers scan 1D and 2D QR test tagbarcodes . QR codes have Site,Location, Asset Description and TestSequence data embedded in the QRcode, eliminating the need for datauploads.
Complete Kit, User Training &CalibrationThe ProTag Elite System is suppliedcomplete with PrimeTest Elite tester,ProTag XL tag printer, BCS-OPT-2Dscanner, PATGuard Elite 3 softwareand Elite hard transit case, all backedup by full after sales support with on-site training (conditions apply) andannual re-calibration to keep yourtester up-to-date with latest firmware.
ProTag Elite-PLUSEmona
Ordering Code:PROTAG ELITE-PLUS $7,399 ex GST
OPTIMA Test Tags Ordering Codes:OPT YELLOW Tag Roll $31ex GSTOPT-WHITE Tag Roll $31ex GSTOPT-GREEN Tag Roll $31 ex GSTOPT-ORANGE Tag Roll $31 ex GSTOPT-BLUE Tag Roll $31 ex GSTOPT-RED Tag Roll $31 ex GSTOPT-BURGUNDY Tag Roll $31 ex GST
XL Test Tags Ordering Codes:XL WHITE Tag Roll $49 ex GST
XL Tinted Overlays Ordering Codes:XL YELLOW Overlay $31 ex GSTXL GREEN Overlay $31 ex GSTXL ORANGE Overlay $31 ex GSTXL BLUE Overlay $31 ex GSTXL RED Overlay $31 ex GSTXL BURGUNDY Overlay $31 ex GST
ADVANCED TEST & TAGSYSTEM
Portable Appliance Testers 1
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 5
6 • EMONA Instruments • • SYDNEY Tel 9519 3933 • MELBOURNE Tel 9889 0427
Image
Part Code
Description
Features
Rating
Pins
Standalone
PT125EL
PAC3760DL
PT300
PrimeTest Series
Price Ex GST
PAC-
3P3
Phas
e Ap
plia
nce
& L
ead
Test
er
The
PAC-
3P s
tand
-alo
ne te
ster
con
duct
s a
sequ
ence
test
, sta
rtin
g w
ith a
n ea
rth
cont
inui
tyte
st a
nd th
en p
roce
edin
g w
ith th
e le
akag
e te
st. I
tin
dica
tes
Pass
/Fai
l and
the
actu
al m
easu
red
read
ings
on
the
LCD
dis
play
, and
pro
vide
s
on-s
cree
n us
er p
rom
pts.
20A
and
32A
ext
ensi
onle
ad te
st a
dapt
or is
incl
uded
with
an
eart
h te
stpi
n te
rmin
al, w
hich
elim
inat
es th
e ne
ed fo
rpr
obin
g.
20A & 32A
5=
$1,349.00
PAC-
TPL1
520
Sing
le P
hase
10
A, 1
5A &
20A
Leak
age
Test
Ada
ptor
The
ProT
ag P
AC-T
PL15
20 s
ingl
e ph
ase
leak
age
adap
tor
prov
ides
use
rs o
f the
Sea
war
d Pr
imeT
est
Elite
, Pri
meT
est P
RO &
PAC
3760
DL
with
the
capa
bilit
y of
pow
erin
g up
15A
and
20A
sin
gle
phas
e ap
plia
nces
and
car
ryin
g ou
t a le
akag
ecu
rren
t tes
t.Al
so, p
rote
cts
fuse
on
PAT
test
er w
hen
leak
age
test
ing
high
pow
ered
app
lianc
es.
10A,
15A
& 20A
3=
=
$1,059.00
PAC-
TPL
3 Ph
ase
Appl
ianc
eTe
stin
g Ad
apto
r
The
PAC-
TPL
prov
ides
use
rs o
f the
PAC
3760
DL
and
Prim
eTes
t Elit
e a
nd P
rim
eTes
t PRO
with
the
capa
bilit
y of
pow
erin
g up
10A
, 16A
, 20A
and
32A
appl
ianc
es a
nd c
arry
ing
out a
leak
age
test
. The
test
res
ults
are
dis
play
ed o
n th
e PA
C376
0 D
L un
itor
Pri
meT
est E
lite,
with
bot
h th
e ac
tual
leak
age
read
ing
disp
lay
and
a Pa
ss/F
ail d
ispl
ay.
20A & 32A
5=
=
$1,199.00
TPI-2
0A3
Phas
e Ap
plia
nce
& L
ead
Test
er
The
TPI s
erie
s ca
n be
use
d w
ith a
ny a
pplia
nce
test
ers
and
are
desi
gned
for
insu
latio
n an
d ea
rth
test
ing
of 3
pha
se e
xten
sion
lead
s an
d 3
phas
eap
plia
nces
.
10A
& 2
0A4
or 5
==
=
=
$159
TPI-3
2A32
A4
or 5
==
=
=
$159
RCD
-3P-
20A
3 Ph
ase
RCD
Tes
tAd
apto
r
The
ProT
ag R
CD-3
P ca
n be
use
d w
ith a
ny R
CDte
ster
or
appl
ianc
e te
ster
with
RCD
test
func
tion.
It su
its 5
pin
thre
e ph
ase
sock
ets.
It fe
atur
es
in-b
uilt
500V
fuse
s fo
r sa
fety
.
20A
5=
=
=
$349
RCD
-3P-
32A
32A
5=
=
=
$349
1 Single & 3 Phase Appliance & Lead Adaptors
Note: 4
0A &
50A
rat
ed c
onfig
urat
ions
are
ava
ilabl
e
• Use Any PAT Tester For Testing RCDsat the Switchboard
The PRO-RCD is a CAT III 600V ratedadaptor for use by licensed electricalcontractors for safe and complianttesting of RCDs at the switchboardwhen using CAT II 300V rated RCDtesters, as typically found on portableappliance testers.
•PRO-RCD•Input Three Sockets 4mm shrouded
and color coded: RED = active/L,BLACK = neutral/N, GREEN – earth/PE
Live Input Neon IndicationSafety Rating CAT III 600V
• Professional Management Software
PATGuard Elite allows users to record,store and report on their PAT testingand asset inspections. Print testreports with photos for visualevidence and asset history reports.
• Record your Testing & Tagging
Log Books are designed for easyrecording of Test Results. Plasticcovered for extra protection, theyfeature 100 pages for test data.
• For AS/NZS3760 Applications• Custom Tags with Your Own Logo
Also Available
•ST-002•• Adhesive backed high quality vinyl• With clear laminated layer• 100 tags per pack.• With permanent marker pen• Custom tags with your logo
available, min -+order 2,000 tags.
•Test Portable RCD’s Without Trippingthe Main Switchboard RCD
Simply plug PRO-ITX into mainspower outlet, plug the portable RCDunder test into PRO-ITX, connect RCDtester and conduct the test.
•PRO-ITX•Power Rating 240/230V 50VAThermal ProtectionFuses Output and input protectedWeight 1.55kg
•Supplied with Calibration Certificate
Compact and robust, single range RFpower measurement instrumentoperating at 2.45 GHz frequency.
•TX-2000•Operating Frequency 2.45GHzCalibration Accuracy +/-1dBResponse Time < 1 secondResolution 0.1mW/cm2Display 2 1/2 Digit LCD 10 point linearSensor - source spacing 5cmRigid Carry-Case with foam inserts.
LOG BOOK & TEST TAGS
Log BookEmona
Ordering Code:PRO-LOGBOOK $17.76 ex GST
RCD ISOLATIONTRANSFORMER
PRO-ITXEmona
Ordering Code:PRO-ITX $199 ex GST
Ordering Code:ST-002 Red Pack $29 ex GSTST-002-Blue Pack $29 ex GSTST-002-Orange Pack $29 ex GSTST-002-Green Pack $29 ex GSTST-002-White Pack $29 ex GSTST-002-Yellow Pack $29 ex GSTST-002-Mixed Pack $29 ex GSTST-002-Danger Pack $29 ex GST
Test TagsEmona
Ordering Codes:PG3-ELITE $1,499 ex GSTPG3-EL/LIC Additional User$599 ex GSTPG3UPD-ELITE Upgrade $526 ex GST
PATGUARD SOFTWARE
PATGuard Elite 3Seaward
PRO-RCDEmona
Ordering Code:PRO-RCD $899 ex GST
SWITCHBOARD RCD TEST CAT III ADAPTOR
MICROWAVE LEAKAGETESTER
TX-2000Celtek
Ordering Code:TX-2000 $699 ex GST
1Portable Appliance Testers
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 7
8 • EMONA Instruments • • SYDNEY Tel 9519 3933 • MELBOURNE Tel 9889 0427
Portable Appliance Tester Accessories1
Image Part Code Description Application
PrimeTest 125 EL
PAC3760 DL
PT300
PrimeTest Series
Price Ex GST
PAC-EXT Extension LeadAdaptor
Adaptor for extensionlead testing andpowerboard testing.
= = = =
$40.00
PAC-MSL Mains Supply Lead Lead for poweringmains powered testers. = = =
$68.00
PT-EC Earth Clip Large For conducting earthand insulation tests = = =
$72.00
PT-EP Earth Clip Small For conducting earthand insulation tests = =
$85.00
PAC-CB Carry Case Padded carry case withzipper. = = =
$61.00
PAC-OPT-PCPrinter Cable for PAC-OPT Test TagPrinter
Cable to connectPAC3760DLto PAC-OPTTest Tag Printer
=
$72.00
PAC-OPT-AC AC Adaptor for PAC-OPT
AC Adaptor forcharging the PAC-OPTTest Tag Printer
=
$130.00
T10A Fuses Fuses for PAC3760 DL =
$20.00
Set of 10
PT-01 PT300 Battery ChargerAC adaptor forcharging PT300batteries
=
$274.00
HR-3UWX PT300 RechargeableBatteries
Sanyo ENELOOP AA2.5Ah =
$30.00
Set of 6
Image Part Code Description Application
PrimeTest 125 EL
PAC3760 DL
PT300
PrimeTest Series
Price Ex GST
F8TO16AU Bluetooth AdaptorBluetooth Adaptor todownload test resultsfrom PT300 Tester
=
$45.00
900163 Fuses Fuses for PT300 tester =
$20.00
Set of 10
OPT-T-AC AC Adaptor for PT-OPT-T
AC adaptor forcharging PT-OPT-T Test Tag Printer
=
$68.00
PT-ELTBAT PrimeTest Elite Battery Pack
Replacement batterypack =
$173.00
PT-PLUS-ELTBAT
PrimeTest Elite-PLUS Battery Pack
Replacement batterypack =
$163.00
ELT-LEADS PrimeTest Elite TestLead Set
Red and black testleads, probes andalligator clips
=
$64.00
ELT-POUCHHands Free NeckPouch for PrimeTestElite & PrimeTest PRO
Carry the PrimeTestSeries around yourneck for hands freeoperation
=
$115.00
900172 Fuses 16A Fuses forPrimeTest Elite =
$20.00
Set of 10
OPT-FC Fast Charger
Fast charger for ProTag Elite andProTag Optima test tag printers
= =
$134.00
PRO-XL-FC Fast Charger Fast charger for ProTagXL test tag printer =
$106.00
1Portable Appliance Tester Accessories
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 9
Installation TestingEmona has been supplying Metrel products into theAustralian electrical contracting market since 1993.
With a user base of many thousands of testers, Metrelproducts have been supplied to utilities, Defence andelectrical contractors. A particular strength of Metrelinstruments is that they are often customised specificallyto suit Australian Standards and testing practices.
Metrel & InstalTest Quick Facts
= In 2004 Metrel customised their popular MI-2121 RCDtester to suit the RCD testing requirements of theAustralian Defence Force, resulting in the MI-2121ADFvariant with 600 units supplied to ADF facilities aroundAustralia.
= In 2006 we introduced the InstalTest 3017, the firstmultifunction installation tester with in-builtAS/NZS3017 limits. This was the first time amultifunction tester provided users with AustralianPass/Fail limit tables, simplifying installation verificationfor electrical contractors and regulatory authorities.
= In 2007 we introduced the Polarity Plus, a variant of thepopular InstalTest 3017. It provides utility line workerswith polarity and neutral testing of electrical serviceconnections. Almost 1,100 units were supplied toelectrical utilities around Australia.
= The release of the InstalTest COMBO in 2010 furthercemented Metrel’s position as the leading innovator inmultifunction installation testers, by introducing SocketOutlet Testing according to AS/NZS3017 testprocedures.
= Almost 5,000 InstalTest users are verifying and testingelectrical installations around Australia every day usingMetrel testers.
10 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
PowerTest 200
Instaltest COMBO
InstalTest XC
InstalTest XD
Tester Features:
Dis
play
LCD
LCD
Colo
ur T
ouch
Scr
een
Colo
ur T
ouch
Scr
een
Indi
catio
nN
umer
ical
Gra
phic
al P
ass/
Fail,
Rea
ding
Gra
phic
al P
ass/
Fail,
Rea
ding
Gra
phic
al P
ass/
Fail,
Rea
ding
Keyp
adO
OP
PIn
terf
aces
OO
Seri
al ,
USB
& B
luet
ooth
Seri
al ,
USB
& B
luet
ooth
Batt
ery
6 x
AARe
char
geab
le 6
x A
A N
iMH
Rech
arge
able
6 x
AA
NiM
HRe
char
geab
le A
h Li
-Ion
Pack
On-
Boar
d M
emor
yO
O8
GB
8 G
BRe
mot
e Pr
obe
PO
ptio
nal
Opt
iona
lO
ptio
nal
Tests Performed:
Insu
latio
n Re
sist
ance
250V
/500
V/10
00V
50V
... 1
000V
50V
... 1
000V
50V
... 2
500V
Volta
ge0
... 4
40V
0 ...
550
V0
... 5
50V
0 ...
550
VFr
eque
ncy
O0
... 4
99.9
Hz
0 ...
499
.9H
z0
... 4
99.9
Hz
Cont
inui
ty0.
01 ..
. 199
ohm
s, 2
00m
A0
... 1
99oh
ms,
200
mA
0 ...
199
ohm
s, 2
00m
A0
... 1
99oh
ms,
200
mA
Faul
t Loo
p Im
peda
nce
No
RCD
and
With
RCD
No
RCD
and
With
RCD
No
RCD
and
With
RCD
No
RCD
and
With
RCD
Sock
et V
erifi
catio
nO
Dea
d So
cket
Live
& D
ead
Sock
etLi
ve &
Dea
d So
cket
RCD Tests Performed:
Rang
e10
mA,
30m
A, 1
00m
A10
mA,
30m
A ...
100
0mA
10m
A, 3
0mA
... 1
000m
A10
mA,
30m
A ...
100
0mA
Trip
Tim
e &
Tri
p Cu
rren
tP
PP
P0o
or 1
80o
Star
ting
Pola
rity
OP
PP
Rand
om P
hase
Med
ical
OO
PP
Scanner - Bluetooth:
OO
Opt
iona
l BCS
-BT
Opt
iona
l BCS
-BT
Software:
Repo
rtin
gO
OES
Man
ager
BAS
ICES
Man
ager
PRO
Exce
l Out
put
OO
ES M
anag
er P
RO U
pgra
deP
Upl
oad
Auto
Seq
uenc
esO
OO
POvervoltage Category:
300V
CAT
III
600V
CAT
III &
300
V CA
T IV
600V
CAT
III &
300
V CA
T IV
600V
CAT
III &
300
V CA
T IV
Accessories:
Lead
s3
x Le
ads,
Pro
bes
& C
lips
3 x
Lead
s, P
robe
s &
Clip
s3
x Le
ads,
Pro
bes
& C
lips
Clip
s3
x Le
ads,
Pro
bes
& C
lipsC
lips
Optional Measurements:
Thre
e Ph
ase
Test
ing
PP
PP
Pow
erO
OP
PIll
umin
ance
OO
PP
Eart
h Re
sist
ance
OO
PP
Price ex GST
$799 ex GST
$1,099 ex GST
$2,299 ex GST
$2,999 ex GST
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 11
Installation Testing Comparison Chart 2
•The Ultimate Touch Screen Multi-Function Tester for Live and DeadInstallation Testing
The Instaltest XC is a revolutionrytouch screen multifunctioninstallation tester for live and deadinstallation testing, verification anddiagnosis. Test results can be savedfor downloading and reporting.
INSTALTEST XC Highlights• Touch screen guarantees quick and
intuitive operation• Basic and advanced live and dead
socket and installation testing withtick or cross result and diagnosis
• Auto-sequences to verify socketsand installations in seconds bycombining up to 6 single tests into asingle push button sequence
• Power & total harmonic distortion• Wire tracing and fuse identification
High Volume RCD Testing• Bar-code scanner input of asset IDs
for high volume testing applications• Logging of RCD push-button tests
with a couple of keypresses• Random phase RCD test selection
for medical installations
•INSTALTEST XC•Voltage 0 - 550VFrequency 0 - 499.9HzContinuity 0 to 199ohms, 200mA for
earth resistance and equipotentialbonding
Insulation Resistance 50V to 1000V,0.01Mohn to 200Mohm
RCD Testing trip time and tripcurrent, 10mA, 30mA ... 1000mA,and with 0o or 180o startingpolarity and with random phase formedical installations
Fault Loop Impedance No RCD andwith RCD
Earth Resistance 3 wire and optional2 clamp methods
Socket/ Installation Dead/Live TestPower Watts, VA, VAR, Amps, PF, THD
(Opt)Illuminance 0.01Lux to 19.99kLux
(Opt)Power Supply 9V DC (6 x 1.5V size AA)COM Ports BlueTooth, USB, RS232Weight 1.3kgSize 230 x 103 x 115mmOvervoltage Category 600V CAT III
and 300V CAT IVKit Includes mains measuring cable,
3 x test leads, 3 x test probes, 3 xcrocodile clips, 5ohm and 10ohmresistor box for socket test, ACadaptor, NiMH rechargablebatteries, ES Manager BASICReporting Software and carry case.
Single Test
Single Tests include voltage, mohms &ohms, RCD, loop impedance, lineimpedance, earth resistance, power &THD measurements, illuminance andwire tracing & fuse identification.
Auto Sequence
The InstalTest’s unique AutoSequence combine up to 6 single testsinto a single key press operation.Verify and diagnose sockets andinstallations, both dead and live,quickly and easily.
Installation Structure
The Site Schematic or Tree-Structureis a unique aspect of the InstalTest’stest result reporting system.
The hierarchy starts with site name and address and then save yourresults according to DB, CB etc. Thesite schematic can be entered into theInstalTest on-site or prepared on theoptional ES Manager PRO softwareand uploaded into the instrument.Structures can also be cloned tospeed up result recording.
LIVE Fault Diagnosis
Active-Neutral Reversed FAIL Result
Neutral-Earth Reversal FAIL Result
LOGGING INSTALLATIONTESTERS
InstalTest XCMetrel
Ordering Code:INSTALTEST XC $2,299 ex GSTIncludes ES Manager BASIC Software
Bar Code Scanning Ordering Codes:BCS-BT Bar Code Scanner $499 ex GSTIT-ASSET RCD Labels $15 ex GST
Optional Accessories Ordering Codes:A1172 Type B Lux Meter $480 ex GSTA1173 Type C Lux Meter $357 ex GSTA1391 AC/DC 300A Clamp $310 ex GSTA1018 Leakage & Power $403 ex GSTA1019 Current & Power $337 ex GSTA119X Cable Tracer $413 ex GSTMI-TPI-20A-4 20A, 4 Pin $269 ex GSTMI-TPI-20A-5 20A, 5 Pin $269 ex GSTMI-TPI-32A-4 32A, 4 Pin $269 ex GSTMI-TPI-32A-5 32A, 5 Pin $269 ex GSTP1101 MSEM PRO Upgrade $205 exGSTP1102 aMSEM Android $134 ex GST
SECTION INDEXInstallation TestersEVSE Charging Station Test AdaptorInsulation TestersEarth Resistance TestersRCD TestersLoop Impedance MetersCable Tracing & LocatingInstallation Tester Field CalibratorAccessories
12 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Installation Testing2
• User Defined Auto Sequences• User Defined Visual & Functional
Inspections
The InstalTest XD builds on thefunctionality of the InstalTest XC withunique user defined Auto Sequencesand Visual/Functional Inspectionsprogrammability
Auto Sequences allow users toprogram testers with user definedtest sequences, whether a sequenceof electrical tests, text based testssuch as visual inspections or anycombination of these.
User Defined Auto SquenceProgramming
Auto Sequences are preparedand edited in the PC MSEM PROsoftware and then uploaded into theInstalTest XD tester.
Auto Sequences can be made up of acombination of any single electricaltest. Visual inspections can also beadded to capture your entire workflow. For example a switch boardinspection can capture RCD tests aswell as visual inspections andmaintenance e.g. dusting/cleaning.
User Defined Visual/FunctionalInspections
User defined visual and functionalinspections can be carried out on-screen and downloaded to thereporting software. This allows usersto replace paper-based or thgird partycheck-lists and combine all electricaland inspection routines in the oneprocess and downloaded into thesame reporting system.
Reporting Generating
Generate PDF reports of all electricaland visual/functional inspections andverifications for customer reportingand record keeping.
• Verification & Testing of Mode 3Electric Vehicle Charging Stations
• Use with InstalTest Series Testers
The Metrel A-1532 EVSE (ElectricVehicle Supply Equipment) adapter isa special accessory for the InstalTestseries of multifunction testers for usein the verification of electrical safetyand functional testing of Mode 3electric vehicle charging stations witha type 2 connector.When used with InstalTest XC and XDInstallation testers, the complete EVSEcharging station can be tested (state-by-state) electrically and functionallywith a push of a button and create aprofessional station-based report withMetrel's MESM software.Adaptor Connection Diagram
Examples of Error Conditions• Error condition or disconnection of
plug• EVSE does not supply energy• EV detected, EV not ready to receive
energy, EVSE does not supply energy• EV ready to receive energy, EVSE is
supplying energy if ventilation is notrequired.
• EV ready to receive energy andrequires ventilation, EVSE issupplying energy, ventilation exists.
• EVSE doesn’t supply energy
InstalTest XDMetrel
Ordering Code:INSTALTEST XD $2,999 ex GSTIncludes ES Manager PRO Software
Bar Code Scanning Ordering Codes:BCS-BT Bar Code Scanner $499 ex GSTIT-ASSET RCD Labels $15 ex GST
Optional Accessories Ordering Codes:A1172 Type B Lux Meter $480 ex GSTA1173 Type C Lux Meter $357 ex GSTA1391 AC/DC 300A Clamp $310 ex GSTA1018 Leakage & Power $403 ex GSTA1019 Current & Power $337 ex GSTA119X Cable Tracer $413 ex GSTMI-TPI-20A-4 20A, 4 Pin $269 ex GSTMI-TPI-20A-5 20A, 5 Pin $269 ex GSTMI-TPI-32A-4 32A, 4 Pin $269 ex GSTMI-TPI-32A-5 32A, 5 Pin $269 ex GSTP1102 aMSEM Android $134 ex GST
EVSE CHARGING STATIONTEST ADAPTOR
A-1532Metrel
Ordering Code:A-1532 $665 ex GST
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 13
Installation Testing 2
• In-Built AS/NZS3017 Limits
The InstalTest COMBO is amultifunction installation tester,replacing a multimeter, insulationtester, RCD tester, loop impedancetester and phase sequence tester in asingle portable instrument.It provides 9 tests, more than anyother comparable tester and providesPass/Fail indication for installationverification and compliance testing.•InstalTest COMBO•Voltage 0 - 550VFrequency 0 - 499.9HzContinuity 200mA for earth
resistance and equipotentialbonding
Insulation Resistance 50V to 1000V,0.01Mohn to 200Mohm
RCD Testing trip time and tripcurrent, 10mA, 30mA ... 1000mA,and with 0o or 180o startingpolarity
Fault Loop ImpedancePhase RotationSocket Test earth continuity, polarity
and correct connections tests witha single push button and withPass/Fail indication without trailingleads
Overvoltage Category 600V CAT IIIand 300V CAT IV
Includes mains measuring cable,3 x test leads, 3 x test probes,3 x crocodile clips, 5ohm and10ohm resistor box for socket test,AC adaptor and NiMH rechargeablebatteries
• Mains Audible & Visual Warning• Remote Test Probe For More
Efficient Single Handed Testing
Australia's newest and best valueelectrical installations multifunctiontester! For $799 ex GST, you get 6meters. Better value and easier to usethan many single function meters,and lower cost of ownership with onlyone instrument to calibrate.Protection FeaturesPowerTest 200’s screen turns fromblue to red and an audible warningsounds if it detects mains voltagewhen conducting a “dead” test.
The PowerTest 200 is also fullyprotected against damage whenaccidentally connected to a wrong testsetting, and meets the safety andperformance requirements ofAS/NZS3017 , as you would expectfrom Seaward with over 35 yearssupplying test equipment to keeppeople safe.
•PowerTest 200•Voltage 0 - 440VContinuity 0.01ohm to 200ohmInsulation Resistance 250V, 500V &
1000VRCD Testing trip time and trip
current, 10mA, 30mA, 100mA, and1/2x, 1x, 2x and 5x current.
Non-Trip Fault Loop ImpedancePhase RotationOvervoltage Category 300V Cat IIIIncludes mains lead, remote probe
with test buttons, 1.2m black,green and red test leads, black,green and red crocodile clips, neckstrap, 6 x AA batteries, tool boxstyle hard carry case
• Verify 3 Phase Installations from TheSocket Outlet - No Probing Required
• Use with InstalTest Series Testers
Verify 3 phase installations from thesocket outlet, without the need forprobing. The MI-TPI makes 3 phaseinstallation verification safer, fasterand more reliable than traditionalmethods requiring probing of thesocket outlet.
Simply connect the MI-TPI to themains socket on your InstalTest Seriestester, select the test required on thetester, select the switch position onthe MI-TPI then use the MI-TPI toswitch between phases.
Phase Sequence & Voltage Display
3 Phase RCD Testing DisplaySWITCH POSITIONSInsulation Testing
Phases to Neutral, BetweenPhases, Phases & Neutral to Earth
Loop/Line ImpedanceL1 - N/PE, L2 - N/PE, L3 - N/PE
RCD TestingL1 - N/PE, L2 - N/PE, L3 - N/PE
Phase Sequence & Voltage3 Phase Plugs standard and custom
confIgurations available.
3 PHASE INSTALLATIONTESTING ACCESSORIES
MI-TPI SeriesEmona
Ordering Code:INSTALTEST COMBO $1,099 ex GSTA1289 Soft Carry Case $76.00 ex GST
InstalTest COMBOMetrel
MANUAL INSTALLATIONTESTER
PowerTest 200Seaward
Ordering Code:POWERTEST 200 $799 ex GSTIncludes Hard Carry Case & Test Leads
Ordering Code:MI-TPI-32A-5 32A, 5 PIN $269 ex GSTMI-TPI-20A-5 20A, 5 PIN $269 ex GSTMI-TPI-32A-4 32A, 4 PIN $269 ex GSTMI-TPI-20A-4 20A, 4 PIN $269 ex GST
14 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Installation Testing2
• Use with Any RCD Tester• Inbuilt 500V Fuses for Safety
The ProTag Three Phase RCD TestingAdaptor is a universal test adaptorthat can be used with any brand ofRCD tester or portable appliancetester with RCD test function.
The ProTag RCD-3P ONLY suits 5 pinthree phase sockets and is available in2 models: RCD-3P-20A for 20A socketsand RCD-3P-32A for 32A sockets.
Initial Set-Up• Insert the Three Phase RCD Testing
Adaptor’s plug into a three-phase • Turn on your RCD/PAT Tester with
RCD test functionality.• Plug the RCD/PAT Tester’s mains test
lead cable into the L1 socket of theThree Phase RCD Testing Adaptor.
• Ensure the RCD is reset andswitched on at this stage.
• Perform the RCD test for 0⁰ phase.• Reset the RCD to continue the test
for the 180⁰ phase.• Repeat testing procedure for L1 in
sockets L2 and L3 in test adaptor.Plug the tester’s mains test leadcable into the L2 and L3 socket ofthe Three Phase RCD TestingAdaptor.
• Repeat the above steps to trip theRCD.
• High Quality Taut Band Movement
•4132IN•Test Voltages
250V DC 100Mohm500V DC 200Mohm1000V DC 400Mohm
Accuracy +5%Scale Multiplier 1/2, x1, x2Insulation Output Short-CircuitCurrent +1.3mA
Continuity 0 - 3ohm, 0 - 500ohmContinuity Output Short-CircuitCurrent >210mA
AC V 0 - 600V ACLive Circuit Warning Light & Buzzer
• Wide Range Up To 30Gohm
•MI-3121•Test V 50/100/250/500/1000V DCInsulation Resistance 0-30GohmContinuity 200mA, 0 - 1999ohm with
automatic polarity exchangeTRMS AC V 0 - 550V ACFrequency 0.00Hz - 500HzAnalogue Scale & Digital ReadingsCustom Limits set limits on
insulation or continuity withPASS/FAIL indication
Built-in Charger/Rechargeable BattOptional PC software and probe
• Capable of Measuring Earth Voltage
•4120ER•Earth Resistance 0 - 1999ohmEarth Voltage 0 - 199.9V ACAccuracy Earth Resistance
12/120/1200ohm +2.1% +1mmEarth Voltage +(1%rdg +2 dgts)2mA Measuring Current permitsearth resistance tests withouttripping earth leakage currentbreakers test.
• 2, 3 and 4 Pole Measurements
•MI-3123•Standard 4-Wire MethodDisplay Range 0 - 9999ohm
Standard 4-Wire with CurrentClampDisplay Range 0 - 9999ohm
2-Clamp Method without Junctions DisassemblingDisplay Range 0 - 99.9ohm
Specific Earth Resistance (soilresistance) Measurement with 4-Wire Method Display Range 0 - >100kohm/m
True RMS Current 0 - 19.99ACustom Limits with PASS/FAILOptions Clamps & PC Software
EARTH RESISTANCETESTERS
4120ER Low CostSEW
Ordering Code:MI-3121 $760 ex GSTA1291 Software $216 ex GST
MI-3121 LoggingMetrel
Ordering Code:4132IN $299 ex GST
BASIC INSULATIONTESTERS
4132IN 1kV AnalogSEW
Ordering Code:RCD-3P-20A $349 ex GSTRCD-3P-32A $349 ex GST
THREE PHASE RCDTESTING ADAPTORS
RCD-3PEmona
Ordering Code:4120ER $298 ex GST
MI-3123 Logging TesterMetrel
Ordering Code:MI-3123 $1,167 ex GSTA1291 Software $216 ex GST
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 15
Installation Testing 2
• Measures Trip Time
•4112EL•Trip Current Setting (includes)
10/30/100/300/500mAPhase Start Selection 00 & 1800
Trip & Phase Polarity IndicatorWiring Polarity IndicatorTimer Resolution 1mSCurrent Accuracy % proportion to VOver Temperature Indication
• RCD Tester, Loop Impedance & Phase Sequence Tester
•MI-3122•Voltage Range 50V - 264VTrip Current Setting
10/30/100/300/500/1000mATest Current Factor x1/2, x1, x2, x5Selectable Phase Angle
00 (positive), 1800 (negative)RCD Trip Current Measurement
with high resolution test rampRCD Trip Time Measurement at
nominal differential current inaccordance with standards
Optional Software for resultdownloading and reporting
• Autoranging, One Button Operation
•4126NA•Loop Impedance Range
0.03 - 2000ohm Auto-rangingProspective Short Circuit (PSC)
0 - 6kA @ 230V ACMeasures
L-E and L-N AC voltagesL-E and L-N Loop ImpedancePSC L-E & L-NEarth Spike, Line & Neutral Imped
Autoranging
• Universal Tracing & Locating System
The MI-2093 Line Tracer is anaccurate wire and cable tracingsystem for energised and non-energised circuits.
MI-2093 Applications• Tracing cables in walls, ceilings, floor
and ground.• Tracing live or voltage free cables.• Locating cable interruptions and
short-circuits in cables.• Locating concealed sockets and
distribution boxes.• Locating fuses and assignment to
circuits.
• Verify Installation TestingInstruments
• Comply with AS/NZS3017
The Metrel CS-2099 makes regularcalibration checks of your testequipment quick and easy withsimple field calibration of the themost frequently used functions fortesting and verifying electricalinstallations.
CS-2099 Features• Insulation calibration up to 1000V• Continuity function calibration• Fault loop impedance calibration
with RCD trip-lock function• Calibration of RCD trip-out time
measurement• Line impedance calibration• Voltage and frequency calibration• Measurement of leads verification• PE test terminal functional
verification• Automatic mains polarity verification
•CS-2099•Insulation Resistance ReferenceValue 2MΩ ±1% and 50MΩ ±1%
Low Resistance Reference Value0.5Ω ±2%, 5Ω ±2% and 15Ω ±2%
Voltage & Frequency ReferenceValue 50.0V@240V AC, ±5%
Fault Loop & Line Impedance 1.2Ω ±0.2Ω, 11.0Ω ±0.5Ω
RCD Trip Out Time Simulation &Current Measurement
Power 240V AC mains voltage
Ordering Code:4126NA $362 ex GST
CABLE TRACING &LOCATING
MI-2093 Line TracerMetrel
Ordering Code:MI-2093 Line Tracer $703 ex GST
LOOP IMPEDANCE TESTER
4126NA Low CostSEW
Ordering Code:MI-3122 $982 ex GSTA1291 Software $216 ex GST
RCD TESTERS
4112EL Low CostSEW
Ordering Code:4112EL $355 ex GST
MI-3122 Logging TesterMetrel
INSTALLATION TESTERFIELD CALIBRATOR
CS-2099Metrel
Ordering Code:CS-2099 $499 ex GST
16 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Installation Testing2
Image Part Code Description Application
InstalTest COMBO
InstalTest XC
InstalTest XD
Price Ex GST
5004/LM-IEC-B Black Alligator Clip = = =
$11.00
5004/LM-IEC-G Green Alligator Clip = = =
$11.00
5004/LM-IEC-R Red Alligator Clip = = =
$11.00
A-1014 4mm Tip Probe - Black = = =
$9.00
A-1062 4mm Tip Probe - Green = = =
$9.00
A-1016 4mm Tip Probe - Red = = =
$9.00
405-IEC-B 2mm Tip Probe - Black = = =
$6.00
405-IEC-G 2mm Tip Probe - Green = = =
$6.00
405-IEC-R 2mm Tip Probe - Red = = =
$6.00
A1289 Soft Carry Bag = =
$76.00
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 17
Installation Testing Accessories 2
Image Part Code Description Application
InstalTest COMBO
InstalTest XC
InstalTest XD
Price Ex GST
A1195 Resistor Box = = =
$146.00
A1010 Universal Test Cable = = =
$74.00
20691918 Mains MeasuringCable = = =
$77.00
83005447 AC Adaptor forCOMBO & IT-XC = =
$23.00
A1153 Earth Test Cable - 20m = =
$80.00
A1029 Earth Test Cable - 50m = =
$128.00
A1022 Earth Test Rod (1pc) = =
$10.00
IT-ASSET RCD Asset Bar CodeLabels = =
$15.00
BCS-BT Bar Code Scanner = =
$499.00
A119X Cable Locator & Circuit Tracer = =
$413.00
18 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Installation Testing Accessories2
Image Part Code Description Application
InstalTest COMBO
InstalTest XC
InstalTest XD
Price Ex GST
P1102 aMSEM AndroidDevice License Key = =
$134.00
P1101 ES Manager PROLicense Key Upgrade =
$205.00
A1569 AC Adaptor for IT-XD =
$53.00
A1172 Type B Lux Meter = =
$480.00
A1173 Type C Lux Meter = =
$357.00
A1391 AC/DC 300A Clamp = =
$310.00
A1018 Power & LeakageCurrent Clamp = =
$403.00
A1019Power, Current &Earth ResistanceClamp
= =
$337.00
A1507 3 Phase Active Switch = =
$841.00
A1401 Tip CommanderRemote Probe = =
$315.00
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 19
Installation Testing Accessories 2
Solar PV Testing Comparison Chart3Se
awar
d PV
150-
SLK
Seaw
ard
PV20
0-SL
KSe
awar
d So
lar
Uti
lity
PRO
PVPM
1500
X
Test
er S
peci
fica
tion
s:M
axim
um T
est C
urre
nt (A
)15
A15
A40
A20
AM
axim
um T
est V
olta
ge (V
)1,
000
V1,
000
V1,
500
V1,
500
VI-V
Cur
ve T
est R
epor
tO
PO
PM
axim
um P
ower
15kV
A15
kVA
45kV
A30
kVA
Elec
tric
al T
ests
:In
sula
tion
PP
OO
Eart
h Bo
ndP
PO
OAu
to S
eque
nce
Test
ing
PP
PP
Test
er F
eatu
res:
Mul
tiple
Str
ings
OO
PO
Andr
oid
Mob
ile A
pp (N
FC)
OP
OO
PC R
epor
ting
Soft
war
eO
PP
Opt
iona
lM
emor
y Re
cord
s20
099
999
910
00+
USB
Con
nect
ivity
PP
PP
Irra
dian
ce S
enso
rP
PP
PTe
mpe
ratu
re S
enso
rP
PP
PCu
rren
t Cla
mp
Met
erP
PN
ot R
equi
red
Not
Req
uire
dM
C-4
Conn
ecto
rsP
PP
PCa
libra
tion
Cert
ifica
teP
PP
PPr
ice
ex G
ST$2
,407
ex
GST
$5,6
75 e
x G
ST$6
,271
ex
GST
$17,
747
ex G
ST
20 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
Adv
anta
ges
of u
sing
a S
olar
PV
Test
er c
ompa
red
to D
MM
/Cla
mp/
Insu
lati
on T
este
r:•
DM
M r
equi
res
spec
ial t
est l
eads
for
safe
con
nect
ion
to P
V ca
bles
•U
sers
req
uire
spe
cial
kit
to a
pply
a s
hort
cir
cuit
safe
ly•
Insu
latio
n te
ster
cou
ld d
amag
e PV
mod
ules
if te
st in
corr
ectly
app
lied
•N
o lin
k be
twee
n ir
radi
ance
dat
a an
d el
ectr
ical
mea
sure
men
ts•
No
dow
nloa
d to
PC,
so
gene
ratin
g co
mm
issi
onin
g do
cum
enta
tion
is m
ore
time
cons
umin
g
• 1000V DC, 15A DC• Conducts O/C Voltage and S/C
Current Tests, as well as ElectricalSafety Tests
Solarlink connectivity enables thePV150 to wirelessly receive andrecord irradiance and temperaturemeasurements in real time from theSS-200R
• Connects Directly to PV Panel orString
• Safe - No Probing Required • Records Irradiance & Temperature • 200 Record Memory & USB
Download • Includes SolarCert Reporting
Software • 10A Max S/C Current
Technical SpecificationsEarth Continuity 0.01ohm to
199ohmInsulation Resistance 250/500/1000V
0.05Mohm to 199MohmOpen Circuit Voltage 5.0V to 1000VShort Circuit Current 0.5A to 15AOperating Current (Using AC/DC
Current Clamp) 0.5A to 40AMemory 200 recordsPC Connectivity USBDisplay Custom LCD with backlightPower Supply 6 x 1.5V Alkaline
• 1000V DC, 15A DC Range• Produces I-V Curves• NFC to Android Devices
The PV-200 clearly displays opencircuit voltage, short circuit current,maximum power point voltage,current and power, as well as the fillfactor of the PV module or systemunder test, and insulation.
The PVMobile App will provide I-V andpower curve to be viewed in fullcolour detail. (STC 1000 W/m2, 25°C)using irradiance and temperaturedata from the Survey 200R irradiancemeter, to allow comparison withmanufacturer’s curve data, includedin the comprehensive PVMobiledatabase.• Operating current (usingsupplied current clamp) up to 40A
Electrical/Analysis Test FunctionsI• -V curve tracing, in accordance with
IEC 61829• Earth/earth continuity• Insulation resistance (auto short
circuittest and point-to-point)• AC/DC voltage measurement• Open circuit voltage up to 1000VDC• Maximum power point voltage up
to 1000VDC• Short circuit current up to 15ADC• Maximum power point current up
to 15ADC• Automatic fill factor calculation• Operating current (using supplied
current clamp) up to 40A• DC power up to 40kW
PV150-SLK/PV200-SLK Kits IncludeTester, Solar Survey 200R, Software,Test leads, Current Clamp & Carry Bag
• 1500V DC, Up to 40A DC
The Solar Utility Pro from Seawardtakes PV testing to the next level. Withthe introduction of more efficient1500V modules and inverters,Seaward have answered the industrycall for an easy to use and robusttester with 1500V capabilities.
Its market leading 40A currentcapability enables the Solar Utility Proto test parallel wired strings up to amaximum of 1500V / 40A (45kW),eliminating the time consuming taskof separating strings to keep withinlower limits of other instruments.
A single press of the Test button willgive values for Open Circuit Voltageand Short Circuit Current, and whenpaired with the Seaward Solar Survey200R irradiance meter, will alsorecord irradiance, module andambient temperature measurements.The large internal storage memorycan record up to 999 complete recordsets, which can be downloaded as aCSV file to a PC for review.
Technical SpecificationsOpen Circuit Voltage Measurement
(PV Terminals)Display Range 0.0VDC – 1500VDCMeasuring Range 5.0VDC – 1500VDCResolution 0.1VDC maxAccuracy ±(0.5% + 2 digits)Short Circuit Current MeasurementDisplay Range 0.00ADC – 40.00ADCMeasuring Range 0.50 - 40.00A DCMaximum Power 45kWResolution 0.01ADC
1,000V SOLAR PVTESTERS
PV150-SLKSeaward Solar
Ordering Code:PV-150-SLK $2,407 ex GST
PV200-SLKSeaward Solar
Ordering Code:PV-200-SLK $5,675 ex GST
1,500V SOLAR PVTESTERS
SOLAR UTILITY PROSeaward Solar
Ordering Code:SOLAR-PRO $6,271 ex GST
SECTION SUMMARY1,000V Solar PV Testers1,500V Solar PV TestersIrradiance & Site Survey MetersSolar Power Clamp Meter
Solar PV Testing 3
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 21
• 1500V DC, 20A DC Range• Produces Precise I-V Curves
The PVPM1500X enables themeasurement of the IV- curve ofphotovoltaic modules as well as ofstrings or arrays. By a patentedprocedure the device can measureand calculate the peak power directlyat the installation site of the PVsystem. Calculation results and thediagram can be displayed on theinternal colour TFT-display.
Technical SpecificationsVoltage 25V / 100V / 500V / 1500VCurrent 2A / 5A / 10A / 20ATemperature -40°C - +100°C with
Pt1000Irradiance 0 - 1300W/m2 (Standard
sensor)
Kit Includes• Measuring instrument in sturdy
plastic housing with carryinghandle
• Battery supply, external powersupply for battery charging and lineoperation
• 4-wire-lead (10 meters, other onrequest)
• Calibrated irradiation sensor
(monocrystalline) and integratedtemperature sensor Pt1000 withlead
• USB cable for PC connection• Control software for MS Windows
XP, Vista, 7, 8, 8.1, 10• Users Manual• External Santon Security Switch
1500V/20A, disconnects all wiresbetween PVPM and generator
• Software for MS Windows for theautomatic generation of testreports (PVPMreport)
• Individually adapted test leads andextension cables
• Two year warranty
• Measures Irradiance With PV Cell
The Solar Survey Series measureirradiance, as as have a built-ininclinometer to measure roof pitch,compass to measure roof orientationand thermometer to measureambient air and module temperature.
SS-100/SS-200R FeaturesIrradiance Range
100 - 1250Wm-230 - 400 BTU/h/ft2
Irradiance Sensor PV reference cellTemperature -30oC to 100oCCompass Bearing 0o to 360oInclinometer 0o to 90oData Logging SS-200R only
• Includes MC4 Test Leads
The Solar Power Clamp is especiallydesigned for installers andtechnicians interested in powermeasurement and analysis on AC &DC systems and carrying outdiagnostic checks.
Solar Power Clamp Features• High performance instrument for
measuring AC and DC power• Includes MC4 test leads for DC
power measurements• Power Factor measurement and
harmonic analysis up to 25thharmonic for inverter performanceanalysis
• Rugged, robust and handheld
Solar Power Clamp SpecificationsAC W / DC W 0.000kW – 599.9kW ADC V 0.00 – 999.9VAC V 0.00 – 999.9VDC A 0.00A – 599.9AAC A 0.10A – 599.9APeak Hold Peak Max / Peak MinFrequency 20.00Hz - 9.999kHz
Ordering Code:PVPM1500X $17,747 ex GSTPVPM Report .............. ........$792 ex GST
PVPM1500XPV Engineering
IRRADIANCE & SITE SURVEY METERS
Solar Survey 100/200RSeaward Solar
Ordering Code:SS-100 $368 ex GSTSS-200R $504 ex GST
SOLAR POWER CLAMP METER
PV-SPCSeaward Solar
Ordering Code:PV-SPC Solar Power Clamp $583 ex GST
Solar PV Testing3
22 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• -200oC - 400oC Measurement Range• 3.5” Touchscreen Display• Picture-in-Picture Image Fusion
The Guide P-120V is a versatile pocketsized thermal imaging camera ideallysuited to electrical maintenance andsolar panel inspections. Advancedfeatures include 3.5” touch screen,picture-in-picture support and Wi-Fi.
•P-120V•
Resolution 120 x 90Temperature Range -200oC to +400oCAccuracy ±2% or ±2oCMax, Min & Alarm FunctionAndroid Operating SystemZoom up to x8Visible Light Camera 320 x 240,
focus freePicture-in-Picture visible & IR image
fusionMeasurement Modes Centre spot,
plus one moveable spotColour Palette 6Thermal File Format
Full radiometric (jpg)Image Storage 4GB, up to 500 sets of
imagesImage Display 3.5” LCD Touchscreen,
320 x 240 resolution Wi-Fi EnabledBattery Type Li-Ion rechargeableBattery Operating Time >2 hoursPC Interface Type C USBPC Software & Android App
• -20oC - 650oC Measurement Range• 192 x 144 Resolution• Manual Focus
Guide’s D Series include the latestfeatures applicable for a wide rangeof industrial applications.
Guide D Series Highlights• 4” touch screen with adjustable
brightness for operation under fullsunlight conditions
• 5MP visible light camera• Built-in illuminator for brighter
visible light images• Removable SD card for up to 32G
storage capacity• Wide communications choices:
Micro USB, Micro HDMI & WiFi
•D-192M•
Resolution 192 x 144Temperature Range -20oC to 650oCAccuracy ±2% or ±2oCAuto Max & Min TrackingFocal Distance 0.5mFocus manualFrame Rate 25Hz/9HzMeasurement Modes 5 x Spot, 2 x
Line, 5 x Area Colour Palette 8Visible Light Camera with integrated
photo lampImage Display IR image, visible light
image, Picture-in-PictureImage Storage Removable SD card,
up to 32GImage Display large 4” LCD touch
screen 480 x 800 pixelsPC Analysis Software & Android
App
• -20oC - 650oC Measurement Range• 384 x 288 Resolution• Automatic Focus
Guide’s D Series include the latestfeatures applicable for a wide rangeof industrial applications.
Guide D Series HighlightsI• 4” touch screen with adjustable
brightness for operation under fullsunlight conditions
• 5MP visible light camera• Built-in illuminator for brighter
visible light images• Removable SD card for up to 32G
storage capacity• Wide communications choices:
Micro USB, Micro HDMI & WiFi
•D-384A•
Resolution 384 x 288Super Resolution 768 x 576Temperature Range -20oC to 650oCAccuracy ±2% or ±2oCAuto Max & Min TrackingFocal Distance 0.4mFocus automaticFrame Rate 25Hz/9HzMeasurement Modes 5 x Spot, 2 x
Line, 5 x Area Colour Palette 8Visible Light Camera with integrated
photo lampImage Display IR image, visible light
image, Picture-in-PictureImage Storage Removable SD card,
up to 32GImage Display large 4” LCD touch
screen 480 x 800 pixelsPC Analysis Software & Android
App
TABLET/POCKET SIZEDTHERMAL CAMERA
P-120VGuide
Ordering Code:P-120V $849 ex GST
ADVANCED THERMALIMAGING CAMERAS
D-192MGuide
Ordering Code:D-192M $3,097 ex GST
D-384AGuide
Ordering Code:D-384A $6,637 ex GST
SECTION SUMMARYTablet/Pocket Thermal CameraAdvanced Thermal Imaging Cameras
Thermal Imaging4
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 23
• Insulation/Continuity Multimeter• CAT IV 600V Overvoltage Protection
The MD-9070 is a high accuracyinsulation and continuity multimeter.It features a dual display, accurateTRMS reading on sinusoidal and non-sinusoidal signals, and in-built VFD formeasuring the true RMS values inaccordance with frequency.
•MD-9070•TRMS AC VOLTAGERange 6.000 V to 1000.0 V Accuracy
from ±(1.0 % of reading + 3 dig)VFD AC VOLTAGERange 600.0 VAccuracy ±(0.4 % of reading + 5 dig)DC VOLTAGERange 6.000 V to 1000.0 V Accuracy
from ±(0.2 % of reading + 3 digits)OHMSRange 600.0 Ω to 60.00 MΩAccuracy
from ±(0.9 % of reading + 2 digits)Audible Continuity 20 Ω to 200 ΩDiode Test 2.000 V Earth Continuity Test
0.015 Ω to 21.99 Ω Hz Line Level Frequency
10 Hz to 440 HzInsulation Resistance 50 V to 1000 VSensing AC, True RMSMAX/MIN/Peak HoldOvervoltage Cat CAT IV / 600 V
• CAT IV 1000V Overvoltage Protection• Highest Accuracy Handheld DMM
The MD-9060 ranks among the mostaccurate multimeters with a largebandwidth and very high resolution.The VFD feature makes theinstrument capable of measuring truevalues in accordance with frequency,
•MD-9060•TRMS AC & AC+DC VOLTAGERange 500.00 mV to 1000.0 V Accuracy
from ±(0.45 % of reading + 40 dig)AC VOLTAGERange 500.00 mV to 1000.0 V Accuracy ±(0.3 % of reading + 20 dig)DC VOLTAGERange 500.00 mV to 1000.0 V Accuracy
from ±(0.02 % of reading + 2 digits)DC CURRENTRange 500.0 μA to 10.00 A Accuracy ±(0.15 % of reading + 20 dig)
TRMS AC & AC+DC CURRENTRange 600.0 μA to 10.00 A Accuracy
from ±(0.5 % of reading + 50 digits)Diode Test 2.000 V Resistance 500.0 Ω to 50.00 MΩ Conductance 99.99 nSMains Freq 10 Hz to 200 kHz Digital Freq 5.000 Hz to 1.0000 MHz Capacitance 50.00 nF to 25.00 mF Temperature -50 °C to +1000 °C MAX/MIN/AVG, Data/Peak HoldOvervoltage Cat CAT IV / 1000 V
• CAT IV 1000V Overvoltage Protection• With Non-Contact Voltage Detection
The MD-9050 is a top-of-the lineindustrial multimeter. High resolutionand accuracy, fast data acquisition,CAT IV 1000V, TRMS current andvoltage and non-contact voltagedetection.
•MD-9050•TRMS AC & AC+DC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.5 % of reading + 3 digits)AC VOLTAGERange 9.999 V to 999.9 V Accuracy ±(1.0 % of reading + 4 dig)DC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.06 % of reading + 2 digits)DC CURRENTRange 600.0 μA to 10.00 A Accuracy ±(0.2 % of reading + 4 dig)TRMS AC & AC+DC CURRENTRange 600.0 μA to 10.00 A Accuracy
from ±(0.6 % of reading + 3 digits)Diode Test 2.000 V Resistance 600.0 Ω to 60.00 MΩ Conductance 99.99 nSMains Freq 15.00 Hz to 50.00 kHz Digital Freq 5.00 Hz to 1.000 MHz Capacitance 60.00 nF to 25.00 mF Temperature -50 °C to +1000 °C MAX/MIN/AVG, Data Hold, PeakHold
Overvoltage Cat CAT IV / 1000 VOrdering Code:MD-9060 $519 ex GST
MD-9050Metrel
4 DIGIT HEAVY DUTYTRMS INDUSTRIAL METER
MD-9060Metrel
4 DIGIT HEAVY DUTYTRMS INDUSTRIAL METER
TRMS INSULATION/CONTINUITY MULTIMETER
MD-9070Metrel
Ordering Code:MD-9070 $655 ex GST
Ordering Code:MD-9050 $326 ex GST
SECTION INDEXMultimetersWattmeter
Multimeters5
24 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• CAT IV 1000V Overvoltage Protection• Large 2-Line LCD Display
Metrel’s MD-9040 is the all roundmeter for industrial applicationscovering high level industrial testing,electronic faultfinding, field servicingand heavy duty electrical testing.
•MD-9040•TRMS AC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.5 % of reading + 3 digits)
DC VOLTAGERange 60.00 mV to 999.9 V Accuracy
from ±(0.06 % of reading + 2 digits)
DC CURRENTRange 600.0 μA to 10.00 A Accuracy ±(0.2 % of reading + 4
digits)
TRMS AC CURRENTRange 600.0 μA to 10.00 A Accuracy
from ±(0.6 % of reading + 3 digits)
Diode Test 2.000 V Resistance 600.0 Ω to 60.00 MΩ Conductance 99.99 nSMains Freq 15.00 Hz to 50.00 kHz Digital Freq 5.00 Hz to 1.000 MHz Capacitance 60.00 nF to 25.00 mF MAX/MIN/AVG, Data Hold, PeakHold
PC Link via optical interfacePower Supply 9 V batteryOvervoltage Cat CAT IV / 1000 V
• TRMS AC Voltage & Current
MD-9030 Highlights• TRMS AC/DC V up to 1000V• TRMS AC/DC A up to 10A• Diode Test • Resistance 400.0 Ω to 40.00 MΩ • Temperature -20 °C to +300 °C • Frequency 50.00 Hz to 1.000MHz • Capacitance 500.0 nF to 3000 μF • MAX Hold, Data Hold• Overvoltage Cat CAT IV/300V
• Affordably Priced DMM
MD-9020 Highlights• AC/DC V up to 1000V• AC/DC A up to 10A• Diode Test • Resistance 400.0 Ω to 40.00 MΩ • Temperature -20 °C to +300 °C • Frequency 50.00 Hz to 1.000MHz • Capacitance 500.0 nF to 3000 μF • Overvoltage Cat CAT IV/300V
• CAT IV 1000V Overload Protection
MD-1150 Highlights• Voltage Testing up to 1000V• Automatic AC/DC Recognition• Continuity Testing up to 2000ohm• Phase & Phase Sequence Testing• RCD Fault Test & Diode Test• Overvoltage Cat CAT IV 1000V
• Watt True Power & Power Factor
•DW-6163•
True Power MeasurementTRMS AC V 0 - 600V ACTRMS AC A 0 -10A ACWATT 0 to 6000W, 1W ResolutionPower Factor 0.01 to 1.00 Frequency Response 40 to 400HzDisplay Large LCD, Dual DisplayMax. Indication 9999Over Input IndicationZero Automatic AdjustmentData Hold/Max/Min Value
Ordering Code:MD-1150 $176 ex GST
MD-1150Metrel
VOLTAGE & CONTINUITYTESTER
Ordering Code:MD-9020 $118 ex GST
MD-9020Metrel
3 3/4 DIGIT GENERALPURPOSE METER
Ordering Code:MD-9030 $169 ex GST
MD-9030Metrel
3 3/4 DIGIT TRMSGENERAL PURPOSE
HANDHELD WATT METER
DW-6163Emtek
Ordering Code:MD-9040 $236 ex GST
MD-9040Metrel
4 DIGIT TRMS INDUSTRIAL METER
Ordering Code:DW-6163 $286 ex GST
5Multimeters
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 25
• CAT IV 1000V Rating
The MD-9250 meets overvoltagecategory CAT IV 1000 V. The large jawscapacity of (max. 55 mm) in diameterallows AC/DC current measurementsup to 2000 A. The MD-9250 offershigh resolution and accuracy with 2-line LCD display and fast dataacquisition.
•MD-9250•DC Volt 1000VAC Volt 1000VAC Current 200.0A to 2000ATRMS AC/DC V & ATemperature -50 °C to +1000 °C Frequency 10Hz to 400.0HzJaw Size 55mmAuto-Check Function automatic
detection of AC voltage, DC voltageor resistance
Transient Protection it protects userin case of lightning strike orswitching surge up to 12 kV
Relative Zero Mode relative functionfor comparing the differencebetween signals or removingbackground noise.
Data Hold & Peak HoldOptional PC Link SoftwareDisplay large LCD display with
backlightOvervoltage Cat CAT IV 1000V
• TRMS AC A and Single Phase Power
The MD-9240 is a high versatile powerclamp meter. It measures TRMS AC A,AC and DC voltage, single phasepower, temperature and more. It isideal for checking distributionsystems, switchboards and motors orsystems where the supply iscontaminated with harmonics.
•MD-9240•DC Volt 600VAC Volt 600VAC Current 40.00A, 400.0A, 1000ATemperature -50 °C to +300 °C Ohms 999.9ΩContinuity Test 10 TO 300ΩFrequency 5.00Hz to 500.0HzPower Factor 0.10 to 0.99Apparent Power 0 to 600.0kVAActive Power, Reactive Power
0 to 600.0kW, kVarAuto Check automatic detection of
AC voltage, DC voltage or ACcurrent
Jaw Size 45mmData HoldPeak HoldOptional PC Link SoftwareDisplay large LCD display with
backlightPower 2 x 1.5V battery AAAOvervoltage Cat CAT IV 300V,
CAT III 600V
• TRMS Up to 1000A AC
The MD-9231 is an industrial TRMS ACand DC current clamp with a wide jawopening and is capable of measuringcurrents up to 1000A.
•MD-9231•DC Volt 600.0V to 1000.0VAC Volt 600.0V to 1000.0VDC Current 60.00A to 1000AAC Current 60.00A to 1000AOhms 600.0Ω to 60.00kΩAudible Continuity TesterDiode Test 2.000VCapacitance 200.0nF to 2500 μFJaw Size 51mmAutoranging user can switch
between auto and manual rangingRelative Zero ModeData HoldFlashlightNon-contact detection ofelectromagnetic fields
Power 2 x 1.5V batteryOvervoltage Cat CAT IV 600V,
CAT III 1000V
Ordering Code:MD-9231 $310 ex GST
Ordering Code:MD-9250 $470 ex GST
MD-9231Metrel
TRMS AC/DC CURRENTCLAMP METER
Ordering Code:MD-9240 $286 ex GST
MD-9240Metrel
TRMS POWER CLAMPMETER
MD-9250Metrel
CAT IV 1000V INDUSTRIALCLAMP METER
SECTION INDEXCurrent Clamp MetersPower Clamp MeterLeakage Clamps
Clamp Meters6
26 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• AC & DC TRMS Voltage to 1000V
The MD-9222 is a high quality TRMSAC current clamp meter with theability to measure capacitance andfrequency and an in-built VFD featurewhich allows the measuring of thetrue values in accordance withfrequency.
•MD-9222•DC Volt 600.0V to 1000.0VAC Volt 600.0V to 1000.0VAC Current TRMS 60.00A to 1000AOhms 600.0Ω to 60.00kΩAudible Continuity TestDiode Test 2.000VHz Line Level Frequency 5Hz to
999.9HzCapacitance 200.0μF to 2500 μFJaw Size 51mmAutoranging user can switch
between auto and manual rangingEF Detection non-contact and probe-
contact electric field detectionRelative Zero ModeData HoldDisplay 3 5/6 digits, 6000 count large
LCD display with backlightPower 2 x 1.5v batteryOvervoltage Cat CAT IV 600V,
CAT III 1000V
• Great Value for Money
•MD-9210•DC Volt 400.0mV to 600VAC Volt 4.000V to 600VAC Current 40.00A, to 600AOhms 400.0Ω to 40.00MΩDiode Test Open-circuit voltage <1.6VFrequency 10Hz to 100kHzCapacitance 500.0nF to 3000 μFJaw Size 26mmAutoranging & Relative Zero ModeOvervoltage Cat CAT IV 300V
• 0.1mA Resolution
•DCT-354•AC Current 200mA, 20A & 200A
±2% typicalMax Resolution 0.1mAData Hold for displayed valuesIncl. carry case and test leadsConductor Size 19mm
• Unique Earth Leakage Clamp Meter
The MD 9272 is a unique earthleakage clamp meter. It not just hasthe ability to accurately read theTRMS AC leakage current of a system,it can also detect losses in the systemand suggest possible reasons for theloss. Includes voltage, power,harmonic, power factor (PF), totalharmonic distortion (THD) and crestfactor measurments.
•MD-9272•AC Current 40.00mA, 400.0mA,
4000mA, 40.00A, 150.0AAC/DC Voltage 40.0V, 400.0V, 600.0VCrest Factor 1.00 to 9.99Peak Value
40 to 100.0A, 40 to 600.0VPower Factor 0.00 to 1.00Phase -180.0° to +180.0°Power (W, Var, VA) 0 to 9999Power (kW, kVar, kVA) 10 to 99.99Reactive Power 0 to 999.9kVArIntelligent Loss Analysis complex
algorithms detect loss and allowdetermining possible reasons forcurrent loss
Harmonics measures current orvoltage harmonic components anda percentage value of a harmonicup to the 19th
THD and PF dual display allowsreadings to be displayed along withTotal Harmonic Distortion (THD) orPower Factor (PF)
Shielded Jaw for noisy environmentPower 2 x 1.5V battery AAAOvervoltage Cat CAT IV 300V,
CAT III 600V
Ordering Code:MD-9222 $235 ex GST
MD-9222Metrel
TRMS AC CURRENTCLAMP METER
Ordering Code:MD-9272 $582 ex GST
Ordering Code:MD-9210 $160 ex GST
MD-9210Metrel
MINI CLAMP METER
Ordering Code:DCT-354 $272 ex GST
200mA ACEmtek
LEAKAGE CLAMP - AC A
MD-9272Metrel
LEAKAGE CLAMP TRMSWITH POWER FUNCTIONS
6Clamp Meters
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 27
• Test Voltages Up To 10kV, 20 TΩ
MI-3210 Key Features• Insulation resistance up to 20 TΩ.• Adjustable test voltage (50 V...10 kV)
50 V and 100 V step.• Programmable timer.• Capacitance measurement.• Charging rate for capacitive load < 3
s / µF at 10 kV.• Automatic discharge of test object
after completion of measurement.• Guard terminal.• High voltage breakdown detection.• Custom defined tests.• Auto adjustment function.• Measurement results in numerical
and graphical form.• PC software HVLink PRO for
downloading and analysing of thetest results and test report printing.
• Isolated RS232 and USBcommunication ports, BT interface.
• High quality accessories includingshielded test leads in standard set.
• High EM interferences protection:Input AC current noise rejection (1mA∞600 V) and additional averagingof the result (5, 10, 30, 60).
• CAT IV / 600 V.
• Test Voltages Up To 5kV, 15 TΩ
MI-3205 Key Features• Insulation resistance up to 15 TΩ.• Adjustable test voltage (50 V...5 kV)
50 V and 100 V step.• Programmable timer.• Capacitance measurement.• Charging rate for capacitive load <
1.5 s / µF at 5 kV.• Automatic discharge of test object
after completion of measurement.• High voltage breakdown detection.• Custom defined tests.• Auto adjustment function.• Measurement results in numerical
and graphical form.• PC software HVLink PRO for
downloading and analysing of thetest results and test report printing.
• High Accuracy & Resolution
The MI 3250 MicroOhm 10 A isportable low resistance ohmmeter formeasuring low resistances ofbreakers and switches, busbars, cablejoints, small to medium sizedtransformer and motor windings forindustrial application, etc., with testcurrent up to 10 A. The used 4-leadKelvin testing method together withautomatic bidirectional procedureensure very high accuracy of test
results (0,25%). The instrument can bepowered by mains or internalrechargeable batteries. Test resultscan be stored on the instrument andwith PC software HVLink PRO that issupplied as a part of standard setenables transfer of measured resultsto PC where they can be analysed orprinted.MI-3250 Key Features• Accurate: 0.1 nΩ best resolution with
0.25% accuracy.• Bar graph: on screen resistance bar
graph.• Battery powered: more than 1000
measurements with 10 A testcurrent can be performed whenpowered by internal battery only.
• Safe: High overvoltage category CATIV / 300 V.
• Four measuring modes: Automatic,single, continuous and inductive.
• Automatic thermal EMF elimination:with automatic bidirectionalmeasurement.
• Temperature compensation:measured resistance can beadjusted according to ambienttemperature, which can be enteredmanually or external probe.
• Portable Low Resistance Ohmmeter
MI-3242 Key Features• Bidirectional resistance
measurement from 1 μΩ up to 199,9Ω with test current
• Four measuring modes: Automatic,single, continuous and inductive.
• Automatic thermal EMF elimination:auto bidirectional measurement.
• Accurate: 1 µΩ best resolution with0.25% accuracy.
HIGH VOLTAGE INSULATION TESTERS
MI-3210Metrel
Ordering Code:MI-3210 $5,669 ex GST
MI-3205Metrel
Ordering Code:MI-3205 $4,063 ex GST
CONTINUITY TESTERS
MI-3250 10AMetrel
Ordering Code:MI-3250 $3,961 ex GST
MI-3242 2AMetrel
Ordering Code:MI-3242 $1,471 ex GST
SECTION INDEXHigh Voltage Insulation TestersContinuity Testers
High Voltage Testing7
28 • EMONA Instruments • • NSW Tel 9519 3933 • VIC Tel 9889 0427 • QLD Tel 3392 7170
• Cost effective, traceable calibrationsolution
In many service and maintenanceenvironments, test equipment usedfor making measurements must bechecked periodically to ensure thereliability of readings.
Emona’s primary calibrationequipment includes a TimeElectronics AC/DC calibrator with15ppm basic accuracy, and Prema 8.5digit DMM with 0.5ppm stability.
DMM calibration AC V, DC V, AC A,DC A and Ohms range pricing:
Insulation tester calibrationpricing:
RCD tester calibration pricing:
Multi-function installation testerpricing:
A full report of test detailing appliedvalues and reading taken is available,if required for $89.
• Covers All Seaward Testers• Regular Calibration of Testers isRequired under AS/NZS3760
Regular calibration of your portableappliance tester is a requirement ofAS/NZS3760. Verification of yourinstrument’s measurements ensuresthat users can confidently Pass or Failelectrical equipment used at a placeof work.
Emona’s calibration service isprofessional and cost effective. Allequipment used has been tested by aNATA recognised laboratory.Calibrated PAT testers are suppliedwith a Statement of Compliance.
PAT tester calibration on EarthBond, Insulation Resistance,Class I Leakage, Class II Leakage,Sub-Leakage, Load, Polarity ispriced as follows:
Full report of test detailing appliedvalues and readings taken is available,if required, at $89 inc GST.
• Download from www.emona.com.au• Include with All Submited Jobs
All Returns to be Accompanied byan Emona Service Order FormPlease include an Emona ServiceOrder Form with all service andcalibration requests, includingthose accompanied by an officialPurchase Order.
Account Customers All accountcustomers, such as governmentdepartments, hospitals,educational institutions etc, mustinclude an official Purchase Orderwith the Service Order Form.Service and calibration jobs cannotbe completed without an officialPurchase Order.
Pre-Paid or Non-AccountCustomers Customers withoutaccount terms, i.e. “Pre-Paid”customers, should provide creditcard details on the Service OrderForm to guarantee faster jobprocessing turnaround times.Credit card payments arepreferable to EFT as EFT paymentsrequire next day confirmation.
Minimum Charge A minimum chargeof $89 ex GST applies for all repairsor for any maintenance requiredsuch printer re-programming, logoinstallation etc.
Turnaround Times A typicalturnaround time of 7 working daysapplies for calibrations and repairs.Repair turnaround times can beaffected by parts availability.
Booking of Priority Jobs Priorityrepair and calibration jobs must bepre-booked in advance.
Installation Testers Price*each*Incl GST and subject to change without notificationBasic & Logging Type $231
Terms & ConditionsEmona
SERVICE & CALIBRATIONBOOKING FORM
PAT Model Price*each*Incl GST and subject to change without notificationPT125 EL $165PAC500 $121PAC3760 $121PAC3760 Plus/Plus II/DL $198PrimeTest 200 $231
PrimeTest Elite $297PrimeTest 300 $297PAT1000S $165Europa $297Europa-XE $275Europa-Plus $297Maestro $297Supernova $297Supernova-XE $275Supernova-Plus $297
PAT Tester CalibrationEmona
APPLIANCE TESTERCALIBRATION
RCD Tester Price*each*Incl GST and subject to change without notificationBasic & Logging Type $121
Insulation Tester Price*each*Incl GST and subject to change without notificationUp to 1kV $121
DMM Type Price*each*Incl GST and subject to change without notification3.5/3.75/4.5 digit $1215.5 digit $150
Electrical InstrumentsEmona
INSTRUMENTCALIBRATION
• SA Tel 8363 5733 • WA Tel 9361 4200 TOLL FREE 1800 632 953 • EMONA Instruments • 29
SECTION INDEXInstrument CalibrationAppliance Tester CalibrationService & Calibration Booking Form
Calibration Services8
SYDNEY (Head Office)78 Parramatta RdCamperdown NSW 2050Tel: 02 9519 3933Fax: 02 9550 1378
MELBOURNESuite 4, 1175 Toorak RdCamberwell VIC 3124Tel: 03 9889 0427Fax: 03 9889 0715
PERTH213a Belmont AveCloverdale WA 6105Tel: 08 9361 4200Fax: 08 9361 4300
BRISBANE1019 Ipswich RdMoorooka QLD 4105Tel: 07 3392 7170Fax: 07 3848 9046
ADELAIDE3/26 The Parade WestKent Town SA 5067Tel: 08 8363 5733Fax: 08 8363 5799
GROUP WEBSITESTest & Measurement: www.emona.com.auTesting & Tagging: www.protag.com.au Installation Testing: www.instaltest.com.auTIMS Telecoms Trainer: www.tims.com.au
EMONA Instruments Pty Ltd
www.emona.com.au