electric drills and drive units - cs unitec€¦ · electric drills and drive units high-torque,...
TRANSCRIPT
ELEC
TRIC
DRI
LLS
AN
D D
RIV
E U
NIT
S
• 1-800-700-5919 • Visit our website at www.csunitec.com 57
Electric Drills and Drive Units High-torque, multi-geared and variable-speed motors
Heavy-duty Drills for Industry and Construction:
• High-torque output
• Variable-speed, two- and four-geared drillsfor optimum speed selection
• Reversible motors and electronic torque controlon selected models
• Ideal for special applications including valve turning,tube rolling and other jobs
• Safety slip clutch on 11/4" capacitiesto protect operator and tool
• Drilling capacities up to 11/4" in steel
• Special OEM motors availableon request
• One-year warranty
EHB 16/1.4 S
EHB 16/1.4 S R/L
EHB 16/2.4 SR/LC
EAW 16/2 R/L
EHB 20/2.4EHB 32/4.2EAU 34/4**EAU 36/4 R R/L†
with 4-speed gearboxand variable speed
* All units available in 220 Volt / 50Hz ** EAU 34/4 available with control box (on/off, reverse) – order Model. No. EAU 34/4 CB
** EAU 36/4 R R/L available with control box – order Model. No. EAU 36/4 R R/L CB Special Motors available upon request.
7.3
9.6
10
9
10.5
15.5
20
22
MotorPower(Amps)
110V
110V
110V
110V
110V
110V
110V
110V
Voltage*
5/8"5/8"5/8"
N/A3/4"
11/4"
–
–
DrillingCapacityin Steel
12
19
19
8
32
112
203
187
Max.TorqueOutput(ft./lbs.)
NO
YES
YES
YES
NO
NO
YES
YES
Revers-ible
6.8
7
7
7
9.2
15.2
19.5
20
Weight(lbs.)
5/8" Keyless5/8" Keyless5/8" Geared5/8" X 16 UN
MT2
MT3
MT3
MT3
Chuck/Arbor
0-500
0-450
0-430/0-760
510/950
250/450
110/175/245/385
80/130/360/570
50-12080-190110-270180-420
Load Speed (RPM)
Model No.
ModelEHB 20/2.4
Model EHB 16/1.4 S
Model EHB 16/2.4 SModel EHB 16/2.4 SR/LC
ModelEAU 34/4 CB
ModelEAU 36/4 R R/L
ModelEHB 32/4.2
SLO
W-S
PEED
ELE
CTR
IC D
RILL
S A
ND
DRI
VE
UN
ITS
• 1-800-700-5919 • Visit our website at www.csunitec.com58
Slow Speed: two-geared, variable-speed reversible motors
1/2" and 3/4" Square Driveaccessories allow motorcompatibility for variousdrive applications.*
Up to 11/4" twistdrill capacity
Model EHB 32/2.2 R/RLModel ETE 32/2.3 R/RL
Model ETE 32/2.3 R/RL(shown with optionalSquare Drive adapter)
• High-torque, two-geared and variable-speedreversible motors
• Ideal for drilling, reaming and tapping steel
• Driving applications include mills, spindles, barboring, pipe beveling and valve turning
• Perfect for tube rolling and expanding for fire tube and water tube boilers
• Mechanical safety clutch prevents operator injury ordamage to the tool
• Morse Taper #3 arbor
• One-year warranty
EHB 32/2.2 R/RL
ETE 32/2.3 R/RL
** All units available in 220 Volt / 50Hz*** With Expander (Up to 2 1/2" with Bead Roller)
* 1/2" Square Drive with MT3 – Part No. 830-1230-0503/4" Square Drive with MT3 – Part No. 830-1230-075
16.3
16.3
MotorPower(Amps)
110V
110V
Voltage**
11/4"
N/A
DrillingCap. inSteel
2"
3" ***
TubeRolling(max.)
YES
YES
Revers-ible
14
15
Weight(lbs.)
MT3
MT3
Arbor
92 max.
174 max.
TorqueOutput(ft./lbs.)
YES
NO
TorqueControl
60-140 /200-470
30-75 /90-230
LoadSpeed (RPM)
Model No.
Electric Drills and Drive Units
ELEC
TRIC
DRI
VE
UN
ITS
/ SP
ECIA
L M
OTO
RS
• 1-800-700-5919 • Visit our website at www.csunitec.com 59
Special Electric Motor Options
Driving applicationsinclude mills, spindles,bar boring, tube rolling,valve turning and more.
Custom DesignOptions Include:� Forward/Reverse
� Variable Speeds
� Multiple Gears
� Spindle: MT or Special
� MultifunctionalControl Boxesor Handles
� 1/2 to 4 HP
� Modular Design
Contact us today toconfigure the motorthat meets your specificdriving applications.
Spindle Options: MT2 / MT3
Square Driveor Threaded
Gear Selection Knob
Holes for Mounting(Model EAU 34/4 only)
Control Boxeswith On/Off,
Variable Speed
Forward/Reverse Control
Electronic Torque Control
Variable-speed Dial
High-torque, reversible electric drill motors for custom applications
PNEU
MA
TIC
DRI
LLS
AN
D D
RIV
E U
NIT
S
• 1-800-700-5919 • Visit our website at www.csunitec.com60
Pneumatic Drills and Drive UnitsHigh-torque reversible drilling and tapping machines
Model2 1261 0010
• High-torque reversible drilling, tapping and threading machines
• Ideal for drilling, reaming, tube rolling, tube expanding and tapping
• Use for special applications including mills, spindles, slides, controllers,pipe tapping, valve turning and more
• Drill chucks and Morse Taper arbors
• Hammer drills for drilling concretewith up to 2200 blows per minute
• Special OEM air motors available on request
• One-year warranty
Pistol Drills
2 1261 0010
Hammer Drills (for concrete and underwater applications)
2 1266 0010
D-handle Drills
2 1310 0010
2 1311 0010
Morse Taper Drills w/ Feed Spindle
2 2089*
2 2506*
2 2502*
* The last four digits of the Model No. identify the type of throttle.Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
0.7
0.75
0.8
0.8
1.7
2.5
2.5
MotorPower(HP)
850
950
650
650
250
220
80
LoadSpeed(RPM)
1/2"
1/2"
1/2"5/8"
11/4"
11/4"
2"
DrillingCap. inSteel
N/A
N/A
N/A
N/A
1"
2"
21/2"
TubeRolling
Cap.
7 max.
7 max.
8 max.
8 max.
36 max.
63 max.
173 max.
TorqueOutput(ft./lbs)
93/4"
12"
121/2"
11"
261/2"
261/2"
261/2"
Length
N/A
N/A
N/A
N/A
15/8"
21/2"
21/2"
FeedLength
4.6
6.7
12
12
28
32
37
Weight(lbs.)
21
21
24
24
24
70
70
CFMat 90PSI
1/2" Chuck
1/2" Chuck
1/2" Chuck
MT1
MT3
MT3
MT4
Chuck/Arbor
NO
NO
NO
NO
YES
YES
YES
Revers-ibleModel No.
Model2 1310 0010
See page 62for Rotary
Hammer Drills
Pneumatic Pistol DrillsPneumatic Hammer Drills
Morse Taper Drills w/ Feed Spindle
D-handle Drills
Model2 2089 0030with reverse andsafety twist throttle
Model 2 1266 0010
ATEXATEX
Corner Drills and Drives
CO
RNER
DRI
LLS
AN
D D
RIV
ES
• 1-800-700-5919 • Visit our website at www.csunitec.com 61
ATEXATEX
Pneumatic, electric and hydraulic: high-torque drilling, reaming and driving units
Model 2 1801 0030
• Small side-to-side distance for tight spaces• Self-closing roll throttle• Built-in oiler for motor• Ideal for bridge
reaming and drilling applications
• One-year warranty• Visit www.csunitec.com for dimensions
2 2081*
2 2087*†
2 2088*†
* The last four digits of the Model No. identify the type of throttle. † Square drive accessories available (see above). Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
13/16"7/8"7/8"
SquareDrive
ID
413
413
138
TorqueOutput(ft./lbs.)
YES
YES
YES
Revers-ible
3"
3"
2"
TubeRolling
Cap.
11/2"
11/2"3/4"
TappingCap.
53
53
53
CFM at90 PSI
10.9" x 26.5"
10.9" x 26.5"
10.9" x 26.5"
Height xLength
29
29
29
Weight(lbs.)
1.35
1.35
1.35
MotorPower(HP)
20
20
60
LoadSpeed (RPM)
PneumaticDrive UnitModel No.
Nonreversible
2 1602 0030
2 1701 0030
2 1801 0030
Reversible
2 2104 0030
Model No. 2 1602 0030 has a 3/8" NPT air inlet. 1/2" (13mm) hose is recommended. All other models have 3/4" NPT air inlet. A 1/2" (13mm)hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.
#1
#2
#3
#4
MorseTaper
5/8"7/8"
11/4"
21/8"
Drilling(in steel)
N/A
N/A
N/A
2"
TubeRolling
Cap.
7
35
53
86
TorqueOutput(ft./lbs.)
500
270
260
180
LoadSpeed(RPM)
21
49
63
71
CFM at90 PSI
12.5"
20.9"
22.5"
23.8"
Length
7
19
25
37
Weight(lbs.)
0.7
1.8
2.6
3.0
MotorPower(HP)
1/2"5/8"
1"
2"
Reaming(in steel)
PneumaticCorner DrillModel No.
2 1806 0010 #3
MorseTaper
11/4"
Drilling(in steel)
N/A
TubeRolling
Cap.
60
Torque Output(ft./lbs.)
220
LoadSpeed(RPM)
4 GPM@2000
OilFlow/PSI
21"
Length
25
Weight(lbs.)
3.8
MotorPower(HP)
1"
Reaming(in steel)
HydraulicCorner DrillModel No.
EHB 32/2.2R/RL
16.3
MotorPower(Amps)
110
Voltage
11/4"
DrillingCap. inSteel
2"
TubeRolling(max.)
Yes
Revers-ible
Yes
TorqueControl
MT3
Arbor
14
Weight(lbs.)
92 max.
TorqueOutput(ft./lbs.)
60-140200-470
LoadSpeed(RPM)
Electric DrillModel No.
Corner Drills and Bridge Reamers
• Ideal for heavy-duty reaming, tubeexpanding and tapping
• Perfect for special driving applications,including pipe tapping and valve turning
Slow-speed, High-torqueStraight Drive Units
Model 2 2087 0010with reverse and lever throttle
Square Drive Accessories 2 2089 7020 – 7/8" Male Sq. Drive to 3/4" Male Sq. Drive2 2089 7070 – 7/8" Male Sq. Drive to 1" Male Sq. Drive6 1016 7940 – 7/8" Male Sq. Drive to 1" Male Sq. Drive
with retaining pin