elcom - general catalogue 2012

Communications and security

General catalogue2012

2

Neckarsulm: Central

Friedersdorf (near Bitterfeld): Subsidiary

NeckarsulmOur location for the future.

Neckarsulm Trend Park - Innovation and ServiceIn the areas of the automobile industry and the IT sector, ELCOM's headquarters our in high-tech company.

Development and electronic production are loca-ted in Neckarsulm. Machining and metal proces-sing are carried out in our Friedersdorf near Bit-terfeld location.

3

■

■

■

■

■

■

BVF-260/560 AP hands-free video intercom, wall-mounted

BVF-260/560 seriesPurist and elegant, the consistent development of a stylish design line.

ELCOM presents: Functionality and comfort now in a re-fined full glass design. Excellent design, high-quality materials, convenient operation, outstanding acoustical properties and a variety of system functions make the BVF-260/560 hands-free video intercom the unit that it is. A unit that leaves nothing to be desired.

high-quality full glass designer faceplatebrilliant high-resolution LCD displayconvenient touch sensor button operationfront speakers for outstanding acousticswide variety of functionsnow for 2-wire and 6-wire video system

4

6DVIDEO

i2AUDIO

2 + 2 + 2

2 + 2 + 2

2 + 2 + 2

2 + 2 + 4

Technologies

BHT-200

BHT-200

BHT-200

Distribution board

i2 bus audio technology

The technological state of the art, i2 bus technology by ELCOM, is the perfect

solution for use in high-end residential construction, office facilities and ad-

ministration buildings. Flexible in use and thus highly functional even with a

few components, i2 bus technology allows you to utilise all the options of

modern building communications.

++ flexible system technology, easy set up

++ high flexibility for complex infrastructure

++ basic technology for additional extensions and connections

i2 bus audio system

2

2

2

2

4

Door release

i2 bus 6-wire Video Technology

The i2 bus 6-wire video technology permits the design of very complex build-

ing communications systems supporting up to 256 units. The use of multiplex

couplers allows the construction of very flexible infrastructures. A number of

special switching modules provide suitable solutions for any application case.

++ Ideal for the implementation of highly complex infrastructures

++ Very advanced system with a large number of special solutions

++ Flexible building management functions using multiplex couplers

i2 bus 6-wire video system

BVF-200

2

BVM-280

BVF-260

Door release

Distribution board

5

2DVIDEO IP

PC

PC

Touchpanel

i2 bus 2-wire video technology

The i2 bus 2-wire video system is an advancement of the familiar i2 bus audio

system. In addition to the functions of calling, speaking and door opening, it

can now also transmit a video signal through the two wires of the bus line. The

maximum capacity is currently limited to 32 video intercoms and up to 16 door

stations.

++ Line-saving 2-wire video system technology

++ Ideal video technology for the renovation market and conversions

++ Mixed operation as needed between video and audio components

i2 bus 2-wire video system

BVF-500

2

2

2

2

4

BVF-500

BVF-560

Door release

Distribution board

IP/SIP technology

This IP/SIP-based speech system offers components that can be integrated

into standardised IP infrastructures and operated with IP-capable terminals

(SIP telephones, software clients). The system is perfectly suited for users who

want to work with IP-based telecommunications and want to integrate their

door communications into the same system.

++ Use of a structured network cabling system

++ IP/SIP protocol can be used on a variety of suitable terminal devices

++ Ideal for integration into modern building infrastructures

IP/SIP technology

2

IP network

IP videophone software

Web browser with Java plug-in

Multiviewer,DVR software

Switch

Switch

Switch

IP telephone with XML brow-ser for video

IP telephone

IP telephone

Cat

Cat

Cat

Cat

Door release

6

0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F

10

0 0

0

B

1

8

i2 bus system addressing

Technology

ELCOM is setting benchmarks in the configuration of its systems.

The Drehfix addressing of telephones using rotary encoder swit-

ches is unbeaten when it comes to speed and flexibility.

Just set the intercom to the address number of the associated call button -

done! In less than a minute, working alone and without any cumbersome

registration calls or walking long distances, you can integrate a residential

telephone into our i2 bus. System sizes of up to 256 units and 16 door

stations can be installed easily and flexibly. You want to reconfigure an

existing system? No problem. When the property is reorganised, it's easy

to implement changes; the maintenance and operation of the system is

simple to take care of due to its logical and visual simplicity, even if the

revision documentation is missing. That means enormous savings in time

and money, with simple assembly and efficient operation.

Miller

Meyer

Smith

Group address

Telephone address

BHT

Door speaker

BVF

BVF

Miller Meyer Smith

Call button

Group address

Telephone address Telephone address

Group address

Call button expander Call button expander

drehfix.

The intelligent speech systemconfiguration for i2 bus systems

fastlogicalfuture-ready

■

■

■

Drehfix addressing -an absolutely practical solution

7

i2 bus system overview

Video transfer on the Intranet

Side entrance

NetworkTCP/IP Intranet

BPI-200Interface

BVS-200Video serverEthernet Audio,

Data,Video

PC

PC PC

PC

BVU-100

Video door station

BVM BVF

Junction box

Telephone systemBTI-200

Interface

Telecommunications

Audio and video can be combined with speaker and

hands-free intercom

ExternalAnalogue out

Call button

BVM with additional but-tons for video monitoring and home automation

BVM BHT BVF

BPI-210Interface

Home automationApplication: "Concierge"

Concierge software

RS232 interface

BVC-280 Concierge

PC

Distribution boardExternal camera

Home automation functions

CRESTRON

Touchpanel

8

New features at a glance

starting on page 68

BVF-560 for 2-wire videoFull glass faceplateExclusive design in black and white

This hands-free video intercom with glass de-

signer faceplate and touch sensor operation

for either flush or surface mounting is now

also available for 2-wire video systems.

New designer faceplate for the BVF-260 and

BVF-560 hands-free video intercom, now in a

refined full glass design. The fresh style is

available in black or white.

starting on page 38starting on page 14 and page 38

Wall-mounted setsAlso in combination with BVF-260

The new sets are now also available with at-

tractive surface-mount door stations in stain-

less steel, for simple installation without ma-

sonry work.

starting on page 55

IP/SIP componentsSpeech system technology for IP networks

System components for seamless integration

into IP infrastructures. Fully compatible with

established communications standards and

thus universal and flexible.

Modernisation at the highest possible level

9

Klick

page 31 and 74 page 80 and 87 All door station programs

Built-in camera module CCS-500 for 2-wire videoNow with nearly 180° of adjustment range

The BEC-200 camera module has a mechanical

adjustment range of nearly 180° and can there-

fore be ideally adapted to local conditions.

Perfect for the fast upgrade of an i2 bus audio

system to the 2-wire video system. The exis-

ting entryway equipment, such as the door

station and door speaker, can be retained.

page 22 page 42

i2-bus pbx interface Fingerprint module ELA fast installationPlenty of functions, simple configuration Optimised technology, compact control unit Tool-free speaker installation

Extensive dialling, control and convenience

functions, signals and convenient program-

ming using PC software leave nothing to be

desired for the pbx connection.

A new scan sensor optimises fingerprint de-

tection and operation. The control unit is now

in a tophat rail housing with a lighted display.

All door stations are now equipped with a fas-

tening unit for door speakers. The door spea-

ker is simply clipped in place and is automati-

cally in an optimum, secure position.

Ideal for simple upgrades

10

i2AUDIO

6DVIDEO

2DVIDEO

1+n

IP

Table of contents

Communications systems 12

Hands-free intercoms video/audio 14 – 19

Intercoms video/audio 20 – 21

Outdoor cameras 22

Built-in cameras 22 – 23

System components for i2 bus audio 24 – 25

System components for 6-wire video 26 – 27

System components for multiplex couplers 28 – 29

Video image storage 30

PBX interface 31

Modular display call system 32

Video concierge station 33

1+n System Communications systems 48

HAT-402 audio intercom 50

System components 51

Sets and kits Complete systems 52

ESTA i2-BUS video sets with BVF-260 AP 54 – 55

ESTA i2-BUS video sets with BVF-200 56 – 57

ESTA/STABILA 1+n audio sets with HAT-402 58 – 61

1+n audio kits 62

i2 bus audio kits 63

i2-BUS video kits 6 and 2-wire system 64 – 65

Access control

Components and systems 76

Keypass 78

Code-Lock 79

Fingerprint 80

Video communications 34

The intelligent communications bus 36 – 37

Hands-free intercoms video/audio 38 – 41

Outdoor colour cameras 42

Built-in camera with door speaker 43

System components for 2-wire video 44 – 45

Mixed audio/video operation 2-wire video 46 – 47

System technology network & telephony 66

IP-based speech system technology 68 – 69

IP door speaker module 70

IP camera module 71

IP expansion modules 72

IP MultiViewer software 73

PBX interface 74

Video communication on the Intranet 75

i2-BUS System

i2-BUS 2-wire Video System

IP/PBX Systems

11

M

E

W

SDoor stations and post box systems in ELOXAL and RAL colours 114

Flush-mounted door stations 116 – 117

Wall-mounted door stations 118

Flush-mounted built-in set 119

Doorbell panels 120

MODESTA

ESTA

Modular stainless steel door stations and pedestals 82

Design/Application examples 84 – 85

Modules 86 – 88

Surface area light, special designs 89

Pedestals 90 – 91

Wall-mounted frames 92

Flush-mounted frames 93

Stainless steel door stations and letter box systems 100

Door stations ZENTRA, stainless steel 102 – 103

Doorbell panels ZENTRA, stainless steel 104

Door stations KONTUR, stainless steel 105 – 106

Door stations KONTUR, PVD brass 107

Flush-mounted letter box systems 108

Wall-mounted letter box systems 109

Pass-through letter box systems 110 – 111

Fence-mounted letter box systems 112

Free-standing letter box systems 113

STABILA

Spare parts Overview 122

Spare parts 1+n system 124 – 125

Spare parts i2-BUS system 126 – 127

Illumination, call buttons, tools 127 – 129

Product list - alphabetical 130 – 133General business terms, contacts 134 – 135

Services

WINX Stainless steel door stations without visible fasteners 94

Design/Application examples 96 – 97

Flush-mounted door stations 98 – 99

13

i2AUDIO

6DVIDEO

i2-B

US

Syst

em

Communications systemsThe ELCOM i2 bus technology is the ideal solution for use in modern residential construction, office facilities and administration buildings.

Useful and highly functional in a variety of applications, the i2 bus tech-nology lets you utilise all the options for future-oriented building com-munications – from connection to telecommunications systems to video communication on the Intranet.

14

The perfect transition between the structural concrete of the entry

area and room design is provided by the BVF-260 hands-free video

intercom. The integration of shining glass with galvanised alumini-

um is stunning due to the variety of options provided by the de-

signer faceplate.

Touchpads for touch-sensitive operation underscore the refined na-

ture of this unit. The cool, smooth glass surface is fascinating due to

its touch.

Hands-free colour video intercom BVF-260

Crystal clear design, perfect integration

Black, rounded Graphite, rounded Umber, rounded Mint green, rounded White, rounded

15

i2-B

US

Syst

em

Clear, consistent and refined.The new premium designer faceplate with a glass front.

Pure elegance - the new full glass designer

faceplates highlight the quality character of

the BVF-260 hands-free video intercom. Cha-

racteristic and still restrained in appearance,

the device blends into sophisticated architec-

ture as a stylish design object.

Available in black or white.

16

6DVIDEO

Hands-free video intercom

TKV-260

Video tabletop consolefor BVF-260/560 AP. For use in the office. 3m con-nector cable with RJ-45 plugs included in delivery.

Note: BVV video distributor required. Switch contact without function.

BVF-260 AP

Hands-free video intercom, wall-mountedPlease assemble the BVF-260 AP from the following components:

BVF-260/BE Video hands-free intercom, Basic unitBVF-APG Wall-mounted housing of your choiceDesigner faceplate of your choice (see page 17)

ELCOM presents: Functionality and comfort in glass and aluminium.

Excellent design, high-quality materials, convenient operation, out-

standing acoustical properties and a variety of system functions make

the BVF-260 hands-free video intercom the unit that it is: A unit that

leaves nothing to be desired.

BVF-260 AP

The new wall-mounted model for sophisticated residential properties

. brilliant high-resolution 10cm (4") LCD display . high-quality designer faceplate . convenient touch sensor button operation . front speaker for outstanding acoustics . available in modular designs in wall- and flush-mounted versions . very extensive system functions

Additional technical features: Brilliant display with a high resolution Good view at side angles Automatic video image display upon call Touch sensor button operation "On Screen" menu in German and English Door opening, call acceptance, manual camera activation Internal calls to other stations Special functions can be programmed, including: internal call, concierge call, call forwarding, parallel call, Portamat, switching function Name display for door and internal connections 16 ring tone melodies that can be assigned to door, storey or internal calls Electronic adjustment of volume and ring tone volume, Brightness, contrast, and colour Status displays for calls and intercom calls Different LED control displays configurable, for example for the mute function Configurable video image storage and/or special functions Full- and half-duplex hands-free calls (switchable) Blocked against visual/audio monitoring Integrated potential-free control relay 3 video telephones can be used in parallel Forwarding of storey calls to parallel video telephones Rotary switch for address configuration, one-man start-up

Dimensions, wall-mounted variant (W x H x D): 135 x 220 x 30 mm

Designation Variant Item no. DG

Basic module 6-wire video system for BVF-260

BVF-260/BE Video hands-free intercom Basic unit 183.260.0 2

Wall-mounted housing for BVF-260

BVF-APG-SI Wall-mounted housing silver 183.261.1 2BVF-APG-SW Wall-mounted housing black 183.261.2 2

Video tabletop console for BVF-260 AP

TKV-260 Video table console 230.126.0 2

17

6DVIDEO

i2-B

US

Syst

em

Designer faceplate

Faceplate, blackBVF-260/E-SW, squareBVF-260/R-SW, rounded

Faceplate, whiteBVF-260/E-WS, squareBVF-260/R-WS, rounded

Faceplate, umberBVF-260/E-BR, squareBVF-260/R-BR, rounded

Faceplate, mint greenBVF-260/E-GN, squareBVF-260/R-GN, rounded

Faceplate, graphiteBVF-260/E-GR, squareBVF-260/R-GR, rounded


For a perfect finish to your residential space, we recommend the flush

mounting of the BVF-260. This unit blends discreetly into the back-

ground and the design of the room, with an impressively refined desi-

gner faceplate.

. Dimensions of front plate (W x H): 135 x 220 mm . Dimensions of flush-mounted boxes (W x H x D): 125 x 195 x 55 mm

BVF-260 UP

The flush-mounted variant for harmonic integration

BVF-260 UP

Hands-free video intercom, flush-mountedPlease assemble the BVF-260 UP from the following components:

BVF-260/BE Video hands-free intercom, Basic unit (see page 16)BVF-UPK-UNI Flush-mounted housingDesigner faceplate of your choice

Glass faceplateBVF-260/G-WS, whiteBVF-260/G-SW, black


Basic module 6-wire video system, Flush-mounted box for BVF-260

BVF-260/BE Video hands-free intercom Basic unit 183.260.0 2BVF-UPK-UNI Flush-mounted box 300.090.1 2

Designer faceplate, square

BVF-260/E-SW Designer faceplate, square black 183.262.2 2BVF-260/E-WS Designer faceplate, square white 183.262.3 2BVF-260/E-BR Designer faceplate, square umber 183.262.4 2BVF-260/E-GN Designer faceplate, square mint green 183.262.5 2BVF-260/E-GR Designer faceplate, square graphite 183.262.6 2


Designer faceplate, rounded corners

BVF-260/R-SW Designer faceplate, rounded black 183.264.2 2BVF-260/R-WS Designer faceplate, rounded white 183.264.3 2BVF-260/R-BR Designer faceplate, rounded umber 183.264.4 2BVF-260/R-GN Designer faceplate, rounded mint green 183.264.5 2BVF-260/R-GR Designer faceplate, rounded graphite 183.264.6 2

Full glass designer faceplates, rounded corners

BVF-260/G-SW Full glass faceplate, round black 183.266.2 2BVF-260/G-WS Full glass faceplate, round white 183.266.3 2

18

6DVIDEO


The BVF-200 is attractive for its compact design. The clear and harmo-

nious lines of the front part characterise the dynamically flat design,

making the effort of flush mounting superfluous. The latest in TFT

display technology and a screen diagonal of 6 cm ensure crisp, sharp

contours without the slightest flicker, as well as excellent naturally col-

oured image quality.

. 6 cm (2.5") colour TFT display . Brilliant colour quality, good view at side angles . Automatic and manual activation of display . Door opening, call acceptance . LED-lit function keys . Ring tone can be enabled/disabled . Ring tone volume adjustable . 16 ring tone melodies . LED status displays for calls and intercom calls . Full- and half-duplex hands-free calls (switchable) . Wall-mounted . Cost-effective one-man installation

. Colour: white . Dimensions (W x H x D): 100 x 192 x 35mm

Additional technical features- Free assignment of ring tones to door, floor

or intercom calls- Manual activation of the last door station

calling (can be disabled)- Automatic call end after 3 minutes- Address configuration using rotary switch- 3 intercoms can be used in parallel- Wall-mounted

- Colour: white- Dimensions (W x H x D): 100 x 192 x 35mm

Tabletop video console (Shown with BVF-200)For use in the office. Suitable for BVF-200 and BVF-500 hands-free intercoms.

3 m connector cable with RJ-45 plugs included in delivery.

Note: BVV video distributor required.

TKV-200

BVF-200

BVF-200

Hands-free talking, colour viewing!

Designation Item no. DG

BVF-200 for 6-wire video system

BVF-200 Hands-free colour video intercom 183.200.0 2

Tabletop video console for BVF-200

TKV-200 Tabletop video console 230.120.0 2

19

i2AUDIO

i2-B

US

Syst

em

Hands-free audio intercom

The ideal candidate for efficient residential construction. Clear, attrac-

tive design, robust plastic housing, without mechanical add-on parts.

Cost-effective installation due to one-man start-up.

. Full- and half-duplex hands-free calls (switchable) . 4 function keys . 3 intercoms can be used in parallel . Call terminator with control display . 16 ring tone melodies . Intra-floor call forwarding through the i2 bus . Call waiting if a connection is active . Listening-in prevention . Wall-mounted . Cost-effective one-man installation


NSG-200

NSG-200, i2-BUS Secondary signal deviceFree assignment of ring tones to door, storey or internal calls. Ring tone volume adjustable. 16 ring tone melodies. Connection for a floor-wide call button. Storey call forwarding through the i2 bus. ABS wall-mounted housing.

Colour: whiteDimensions (W x H x D): 129 x 129 x 33 mm

TKA-UNI

Tabletop audio console(Shown with BFT-200)For use in the office. Suit-able for the BHT-200/280 and BFT-200.

3m connector cable with RJ-45 plugs included in delivery.

BFT-200

Attractive in form and function.

Designation Colour Item no. DG

BFT-200 Hands-free intercom

BFT-200 Hands-free intercom white 171.200.0 2

Tabletop audio console for BFT-200

TKA-UNI Tabletop audio console 130.120.0 2

Secondary signal device

NSG-200 Secondary signal device white 170.152.0 2

20

6DVIDEO

Video intercom

See in natural colours using the latest in TFT colour display technology

in the BVM-280 internal video phone. Dynamic design, excellent image

quality and well-considered, uncomplicated technology are just a few

of the features of the BVM-280:

Video intercomColour: whiteDimensions (W x H x D): 125 x 260 x 57 mm

TKV-280

Tabletop video console(Shown with BVM-280)For use in the office.3 m connector cable with RJ-45 plugs included in delivery.

Note: BVV video distributor required. Switch contact without function.

. 10 cm (4") colour TFT display . Brilliant colour quality, good view at side angles . Automatic/manual activation of display . Convenient magnetic holder for handset . Door opening, 4 programmable keys . LED-lit function keys . Ring tone can be enabled/disabled . Ring tone volume adjustable . 16 ring tone melodies . Internal calls to other intercoms . LED status display for calls . Wall-mounted

BVM-280

BVM-280

See in colour with a no-compromise large-format display


BVM-280 for 6-wire video system

BVM-280 Video intercom white 182.280.0 2

Tabletop video console for BVM-280

TKV-280 Tabletop video console 230.128.0 2

21

i2AUDIO

i2-B

US

Syst

em

Audio intercom

With its clear, harmonious lines in the front, consistent combination of

high-quality materials and exclusive processing, the BHT-200 defines

one of the most elegant options in modern access control.

. 4 function keys . 3 intercoms can be used in parallel . Call terminator with control display . Convenient magnetic holder for handset . 16 ring tone melodies . storey call forwarding through the i2 bus . Call waiting if a connection is active . Listening-in prevention . Wall-mounted . Cost-effective one-man installation


BHT-280

i2 bus intercom, comfortSee above for functions, along with:8 illuminated function keys, of which 4 can be programmed with special functions

Special functions: Internal call, parallel call, access gate, door opener control, different switching functions


TKA-UNI

Tabletop audio console(Shown with BHT-200)For use in the office. Suit-able for the BHT-200/280 and BFT-200.


BHT-200, BHT-280

Ergonomic magnetic holder for handset


Audio intercoms

BHT-200 Intercom white 170.200.0 2BHT-280 Intercom, comfort white 170.280.0 2

Tabletop audio console for BHT-200/280

TKA-UNI Tabletop audio console 130.120.0 2

22

6DVIDEO

Built-in and outdoor cameras

BEC-200, CCS-200/-210

BEC-200

BEC-200Built-in colour camera with integrated IR illumination for 6-wire videoAutomatic switching from colour to B/W mode by low illumination.

Mechanically adjustable: +/- 47º horizontal/verticalOpening angle: 80º horizontal, 60º verticalResolution: 320.000 PixelsLight sensitivity: 0,1 lux/F2.0Video output: 1 Vpp symmetrical, Z=100 OhmPower supply: 15VDC / 200mA

Camera cutout: Ø 60 mmHousing dimensions: 90 x 80 x 29 mm (W x H x D)

CCS-200 / -210

CCS-200Outdoor colour camera in stainless steel housing for 6-wire videoMechanically adjustable: +/-90° horizontal/verticalOpening angle: 63° horizontal, 49° verticalResolution: 320.000 PixelLight sensitivity: 0,2 Lux / F2.0Video output: 1 Vpp symmetrical, Z=100 OhmPower supply: 15VDC / 150mADimensions, Socket: Ø 104 x T 25 mm Dimensions, Camera rod: Ø 24 x L 83 mm

CCS-210Long-range colour outdoor camera in stainless steel housing for 6-wire videoTechnical data as for the CCS-200, but:Opening angle: 21° horizontal, 16° vertical

The BEC-200 built-in camera module has a mechanical adjustment

range of nearly 180° and permits positioning separate from the door

electronics. CCS rod cameras can be discretely hidden to provide unob-

trusive monitoring of the entry area. Here, the CCS-210 long-range

outdoor camera is particularly well suited for a detection area over long

distances.

General installation instructions for camera modules:

The recommended installation height ist approx. 1.60 m.

Cameras may not be directed towards: . Lamps or other light sources . Direct sunlight . Very bright image background or one with strong contrast . Reflecting walls

23

6DVIDEO

i2-B

US

Syst

em

Built-in camera with door speaker

BTC-200

The new built-in camera with door speaker has a mechanical adjust-

ment range of nearly 180°. Even under unfavourable environmental

conditions, the wide pivot range allows ideal adjustment of the camera

in any direction. After dark, the automatic switch from colour to B/W

mode and the built-in infrared lighting ensures optimum viewing.

Combining the camera and speaker saves you space, or makes room

for additional functional modules.

. Feedback suppression using electronic speech control . Volume control . Address configuration using rotary switch . Terminal for light buttons . Door opener function at any time (can be switched) . Acknowledgement tone when call button pushed (can be switched)

BTC-200Camera/door speaker combination with integrated IR illumination for 6-wire videoAutomatic switching from colour to B/W by low illumination.

Mechanically adjustable: +/- 47º horizontal/verticalOpening angle: 80º horizontal, 60º verticalResolution: 320.000 PixelsLight sensitivity: 0,1 lux/F2.0Video output: 1 Vpp symmetrical, Z=100 OhmPower supply: 15VDC / 200mA


BTC-200


BEC Camera module for 6-wire video

BEC-200 Built-in colour camera 181.330.2 2

CCS Outdoor cameras for 6-wire video

CCV-200 Stainless steel colour outdoor camera 181.420.0 2CCS-210 Remote stainless steel colour outdoor camera 181.421.0 2

BTC Camera module for 6-wire video

BTC-200 Built-in camera/Door speaker COLOUR 181.620.0 2

24

i2AUDIO

System components for i2 bus audio

Overview

ELA-100 Door electronics i2 bus built-in door speaker with electronic speech control and feedback suppression, volume and microphone con-trols. Address configuration using rotary switch. Connection option for light barriers. Potential-free door opening switch contact (max. 24V/1A), door opening function at any time (can be disabled), acknowledgement tone when call button pushed (can be switched), connec-tion for call button expander (BTE).

Dimensions: 75 x 99 x 27 mm (W/H/D)

BTE-116Call button expander For the connection of 16 call buttons. Address configuration using rotary switch. Simple connection of call buttons. No matrix switching necessary! Pluggable connector cable to the door speaker (L: 300 mm). At most 16 bus key expanders can be cascaded.


Storey call button

External signal units

Programmable convenience keys

1. Secondary line (with side entrance)

Primary line

For example storeycall through i2 bus,plus switch contact

BER-140

2. Secondary line

RSR-200

SIDE ENTRANCE

BHT-200

BHT-280

BHT-200 BFT-200

i2-BUS

i2 b

us f

unct

ion

sche

me

2-w

ire

audi

o sy

stem

ELA-100

BTE-116 Door release

Switch relay with two potential-free contacts, switches

24V/1A

stairway lighting timer, switches

230V, timer: 30-420 sec.

DISTRIBUTION BOARD

This is a schematic functional view. If a system is built with auxiliary lines, the main line may not have intercoms installed on it. Please consult our i2 bus system manual for planning and installation.

ATTENTION

BSR-140 BSR-200 BLA-100

BKV-100Bus line coupler


BSV-100Bus line power supply

NTR-812Transformer

NTR-812Transformer

ELA-100Door

electronics


MAIN ENTRY

i2-BUS

Control relay with different programmable switching/control functions for: door release button, light button, convenience buttons on telephone, door call signaling,

direct door release/light control

25

i2-B

US

Syst

em

Overview

System components for i2 bus audio

BSV-100Line power supplyi2 bus power supply for supplying the door speaker and up to 32 intercoms. Electronic overload protec-tion. Functional control and overload display with LED. Top-hat rail mounting.

Dim.: 156x58x86 (W/H/D)Space requirements: 9 TE

NTR-812Power transformerSafety transformer with PTC fuse. Top-hat rail mounting.

Input: 230 VACOutput: 12 VAC / 1.5 ADim.: 35x90x60mm (W/H/D)Space requirements: 2 TE

BKV-100Line couplerAutomatically couples main and auxiliary lines. Power supply for the auxiliary line with up to 32 intercoms. Separate voice circuit in aux-iliary line. Electronic overload protection. Status display for data transmission and cou-pling. Top hat rail mounting.Dim.: 156x58x86 (W/H/D)Space requirements: 9 TE

BSR-140 Control relay (universal)For function-specific switching and control functions like: Door release relay, light relay, function relay, door call indicator and direct door release/light control.

Duration turned on: 1-30 sec.Contact rating: max.24V/1ADim.: 35x97x58mm (W/H/D)Space requirements: 2 TE

BPI-210InterfaceFor connection of home automation systems. RS-232 interface with protocol description. Video output using cinch jack. Audio input/output using jacks. Housing for wall mounting.

The device is certified for use in CRESTRON home automation systems.


BSR-200Switch relayWith 2 potential-free switch contacts for inter-com-specific switching functions. Addressable for 1 – 16 units.

Switch contact: max.24V/1ADim.: 52x93x68mm (W/H/D)Space requirements: 3 TE

RSR-200Call switch relayFor installation in the BHT/BFT-200 intercom.Potential-free contact, up to 24 V/1A

BLA-100Lighting timer Intelligent lighting timer with bus interface. Adjust-able time from 30 sec – 7 min. Special functions: Light warning, constant on, door assignment. Switch contact max. 230V/16A.

Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE

Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm), HS version = Top-hat rail version, UP version = Flush mounted version

BER-140Control relay (universal)For function-specific swit-ching and control functions like: Storey call function, door release relay, light relay, function relay, door call indicator and direct door release/light control.

Contact rating: max.24V/1ADim.: 42x51x16mm (W/H/D)

Designation System Variant TE Item no. DG

Door electronics and call button expander

ELA-100 Door electronics i2-BUS - - 170.212.0 2BTE-116 Call button expander i2-BUS Fastening tray - 170.311.6 2

Power supply and line coupler

BSV-100 Line power supply i2-BUS Top-hat rail 9 170.411.0 2BKV-100 Line coupler i2-BUS Top-hat rail 9 190.121.0 2NTR-812 Power transformer i2-BUS Top-hat rail 2 120.100.4 2

Switch relay

BSR-140 Switch relay, universal i2-BUS Top-hat rail 2 190.115.0 2BER-140 Switch relay, universal i2-BUS for UP box 3 190.214.0 2BSR-200 Switch relay, 2 switch. contacts i2-BUS Top-hat rail 3 190.113.0 2RSR-200 Call switch relay i2-BUS for BHT-Built-in - 190.180.0 2

Home automation interface

BPI-210 Home automation interface i2-BUS Wall mounted - 190.305.0 2

Lighting timer

BLA-100 Lighting timer i2-BUS Top-hat rail 3 190.110.0 2

26

6DVIDEO

Video

Video

System components for i2 bus 6-wire video

Single video line

BVF-200

BVF-260

i2-BUS

Multiple video lines (star-wiring)

UP video distribu-tor for star wiring

configuration, 3-way

For external signal units, installation in BVF-200

BVF-200

Power supply

i2-BUS

Power supply

Storey call button

BVV-223RSR-220

i2 b

us 6

-wir

e vi

deo

sys-

tem

fun

ctio

nal s

chem

atic


DISTRIBUTION BOARD

NGV-860Power supply

NTR-812Transformer

HS video distributorfor star-wiring configuration,

3/6-way

All i2 bus audiocomponents can be integrated into the system. See pages

24 - 25.

BVV-203/6


HS video switching unit for multi-door

systems

NGV-860Power supply

BVU-100Switch


MAIN ENTRY

This is a schematic functional view. All i2 bus audio components can be integrated. If a system is built with auxiliary lines, the main line may not have intercoms installed on it. Please consult our i2 bus system manual for planning and installation.

WARNING

ELA-100Door

electronics

BEC-200Camera

MULTIPLE ENTRANCES

BVM-280

Programmable convenience keys

BTC-200Camera

BEC-200Camera

+ components and wiring; see main

entrance


entrance

BBS-256Storage

Central image storage for all

units

27

i2-B

US

Syst

em

Overview


BSV-200Line power supplyi2 bus power supply for supplying the door speaker and up to 32 intercoms. Power is supplied by an NGV-860. LED function display, thermal overload protection.

Input voltage: 15 VDC / I in=2x I outOutput i2 bus: 17 – 22 VDC/300mA/700mA (30 sec.)Dimensions: 52 x 92 x 63 mm (W/H/D)Space requirements: 3 TE

NGV-860Video power supplyCentral power unit to sup-ply the i2 bus video com-ponents. Control display.

Input: 230 VACOutput: 15VDC / 2ADim.: 72x93x68mm (W/H/D)Space requirements: 4 TE

VSU-100Video converter Converts a standard 75 ohm video signal into a symmetrical i2 bus video signal for transmission on a 2-wire line.

BVU-100Video switch Video switch unit for multiple doors, to switch between video cameras. Can be cascaded for mul-tiple doors. Power supply and control through the i2 bus. Function display when switching is active.


BVV-223Video distributor For the star-shaped distri-bution of the video signal with three outputs. Com-pact housing for mounting in a UP outlet.

Dim.: 42x51x16mm (W/H/D)

BVV-203, BVV-206Video distributor For the star-wiring distri-bution of the video signal with three or six outputs. Can be cascaded on the in-put side, jumper for video termination, adjustment control for video quality.


RSR-220Call switch relayFor installation in the BVF-200 video intercoms.Potential-free contact, up to 24 V/1A

VSU-110Video converterConverts the symmetrical i2 bus video signal into a standard 75 ohm video sig-nal for connection to moni-toring screens, long-term recorders, AV modulators, video cards and so on.

BBS-256Video image storageFor the storage of single video frames when using the video intercom.For up to 32 units.

More technical details can be found on page 30

AttentionAdditional i2 bus compo-nents are needed for the audio functions.

See pages 24 - 25.



Video supply

BSV-200 Line power supply 6-wire video Top-hat rail 3 170.412.0 2NGV-860 Video power unit 6-wire video Top-hat rail 4 231.410.6 2

Video distributor

BVV-203 Video distributor, 3 outputs 6-wire video Top-hat rail 3 180.620.3 2BVV-206 Video distributor, 6 outputs 6-wire video Top-hat rail 3 180.620.6 2BVV-223 Video distributor, 3 outputs 6-wire video for UP box - 180.622.3 2

Video switch

BVU-100 Video switch 6-wire video Top-hat rail 2 180.410.0 2

Video converter

VSU-100 Video converter 6-wire video asy. > sym. - 231.620.0 2VSU-110 Video converter 6-wire video sym. > asy. - 231.621.0 2

Call switch relay

RSR-220 Call switch relay 6-wire video for BVF-200 - 190.182.0 2

Video image storage

BBS-256 Video image storage 6-wire video Top-hat rail 5 190.151.0 2

28

6DVIDEO

Video

Video

System components for multiplex couplers

BVF-260

i2-BUSPower supply

BVM-280

max. 32intercoms for each

secondary line

i2 b

us f

unct

ion

sche

mat

ic

for

the

mul

tipl

ex c

oupl

er - Modular i2 bus coupler concept- System extension as needed, simple to scale- Max. 16 primary lines = max. 160 main doors- Max. 64 secondary lines = max. 240 intercoms- 4 separate video links for 4 simultaneous connections

in the overall system- Flexible object management, for example by defining

floor doors as main doors- Optional integration of a video concierge system

Functions:

Starting coupler for the primary line

Terminating coupler for the secondary

lineCascade coupler

for the primary line

Cascade coupler for the secondary line

Concierge coupler for the concierge

connection

External camera

BVC-280 CCS-200

ENTRANCE 1 ENTRANCE 2 through 160


BEC-200Camera


BVU-100Switch




This is a schematic functional view. All i2 bus audio and 6-wire video components can be integrated. Please consult our i2 bus system manual for planning and installation.

Our support team would be happy to assist you in your planning.

ATTENTION

Max. 10 door stations per primary line

The integration of floor door stations into the main line

is recommended for maximum flexibility in building management.

i2-BUSPower supply

BVF-200 BVF-200

ELA-100Door

electronics

+ components and wiring; see

entrance 1

NTR-812Transformer

NGV-860Pow. supply

NGV-860Pow. supply

NGV-860Pow. supply

NGV-860Pow. supply

BKM-142Coupler

BKM-141Coupler

BKM-142Coupler

BKM-142Coupler

BKM-145 Coupler

BKM-144Coupler

BKM-144Coupler

BKM-143Concierge coupler

NGV-860Pow. supply

NGV-860Pow. supply


NGV-860Pow. supply




NGV-860Pow. supply

BVV-203/6

Conciergesoftware

29

i2-B

US

Syst

em

BKM-141, i2 bus coupler-multiplex primary lineFirst main line coupler in the modular BKM-14x coupler family to start the primary line cascade. Provides power for downstream BKM-142. Can be cascaded with up to 15 additional BKM-142 primary line couplers.

4 internal voice links, i2 bus input/output, i2 bus video input, power supply to line through separate line supply.

Support: up to 10 door stationsPower supply: 15VDCDim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE

BKM-144, i2 bus coupler-multiplex secondary lineAuxiliary line coupler in the modular BKM-14x coupler family to connect each additional secondary line. Up to a total of 63 BKM-144 secondary line couplers are sup-ported in one system.


Support: Up to 32 (video) intercoms.Power supply: through BKM-145Dim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE

BKM-145, i2 bus coupler-multiplex secondary lineLast auxiliary line coupler in the modular BKM-14x coupler family to terminate the secondary line cascade. Provides power for upstream BKM-144.


Support: Up to 32 (video) intercoms.Power supply: 15VDCDim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE

BKM-142, i2 bus coupler-multiplex primary lineMain line coupler in the modular BKM-14x coupler family to extend the primary line cascade. Up to a total of 15 BKM-142 primary line couplers are supported in one system.


Support: up to 10 door stationsPower supply: through BKM-141Dim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE

BKM-143, i2 bus coupler-multiplex conciergeVideo concierge coupler in the modular BKM-14x coupler family to connect a secondary concierge line. Enables the connection of a BVC-280 video concierge (page 33) for the entire system. The BKM-143 is integrated between the BKM-142 primary line and BKM-144 secondary line coupler.


Support: 1 BVC-280 video conciergePower supply: through the BKM-141/145Dim. (W x H x D): 102 x 96 x 50 mmSpace requirements: 6 TE

BKM-003/012/024/048i2 bus coupler-multi-plex, connector cableConnector cable to cas-cade the BKM-14X coupler family when installing on multiple top-hat rail rows. 25-pin flat cable with D-SUB plugs.

BKM-003 Length: 14 cmBKM-012 Length: 50 cmBKM-024 Length: 75 cmBKM-048 Length: 125 cm

System components for multiplex couplers

Overview

AttentionAdditional i2 bus 6-wire video components are needed for the audio/video functions.

See page 24 - 27.



Coupler-multiplex, primary line

BKM-141 Coupler-multiplex, PL-Start 6-wire video Top-hat rail 3 190.124.1 2BKM-142 Coupler-multiplex, PL-Cascade 6-wire video Top-hat rail 3 190.124.2 2

Coupler-multiplex, secondary line

BKM-144 Coupler-multiplex, SL-Cascade 6-wire video Top-hat rail 3 190.124.4 2BKM-145 Coupler-multiplex, SL-End 6-wire video Top-hat rail 3 190.124.5 2

Coupler-multiplex, concierge

BKM-143 Coupler-multiplex, concierge 6-wire video Top-hat rail 6 190.124.3 2

Coupler-multiplex, connector cable

BKM-003 Coupler-connector cable 6-wire video approx. 14 cm for 3 190.124.8 2BKM-012 Coupler-connector cable 6-wire video approx. 50 cm for 12 190.124.9 2BKM-024 Coupler-connector cable 6-wire video approx. 75 cm for 24 190.125.0 2BKM-048 Coupler-connector cable 6-wire video approx. 125 cm for 48 190.125.1 2

30

6DVIDEO

Video image storage

Video image storage

The central i2 bus image storage is designed for installation in the junc-

tion box, offering the user a very convenient option for logging door

calls answered.

Every BBS-256 image storage unit has a capacity of 200 individual

frames, and can be used by up to 32 units. The storage capacity of the

image storage unit is distributed over all calls made, and the oldest im-

age in the BBS-256 is overwritten. A radio clock is integrated into the

image storage unit in order to determine the exact time of recording.

The external active antenna is used to receive a DCF-77 time signal. The

time of recording is displayed in the video image during playback. Any

i2 bus 6-wire video intercom can be used to query the image storage

unit. The video intercom requires no additional components for this

purpose, making the upgrade of existing systems problem-free.

An image is always saved for each call made. If the call is not answered,

the recording is signalled by a blinking LED on the intercom. Images can

be retrieved and deleted by the lighting button on the intercom, and

only the images from the video phone called are accessible. The images

are stored on an SD memory card in the BBS-256. These can be re-

moved by technicians for backup. The BBS-256 is configured using a

display menu on the front.

BBS-256

i2-BUSVideo

Schematic: Representation simplified for clarity.

BBS-256

BBS-256i2 bus colour video image storage- For 6-wire video system- For up to 32 units- cascading of multiple BBS-256 supported- For installation in the junction box- Including active antenna

- Power supply: 15VDC / 230mA- Storage capacity: 200 frames- Image resolution: 640 x 480 pixels, 24-bit colour- Space requirements: 6 units (TE), top-hat rail mounting- Dimensions (W/H/D): 93 x 96 x 59 mm

BBS-256Video image

storage

Junction box


BBS-256 for 6-wire video

BBS-256 Video image storage incl. Antenna 190.151.0 2

31

i2AUDIO

i2-B

US

Syst

em

PBX interface

i2-BUS


InterfaceExternalAnalogue a/b


BTI-200

Control functions . Actuate door release, turn on light . Switch cameras, disconnect call . Dialling of door stations and intercoms

Connection to PBX

The BTI-200 telecommunications interface permits the i2 bus speech

system to be connected to the a/b port of a pbx. This makes the speech

system a telephony unit so it can be used as part of a telephone system

installation.

The device is designed for up to 256 units. There are two numbers

available for each unit. These can be switched from the speech menu

or defined as a chain call (if busy or not answered). Door and storey

calls are supported (with the BER-140 or a parallel intercom) as well as

internal calls to normal intercoms. DTMF dialling can control door

strikes, light relays, and up to four BSR-140 control relays. During a call,

up to eight defined door stations can be dialled and those doors ope-

ned. For operation in combination with touch panel PCs, moreover,

camera switching is provided.

For identification of the door call, up to eight individual voice messages

are supported. The unit can be secured against unauthorised access

using a PIN input. Programming is carried out using the integrated dis-

play and the keypad on the unit, or even more conveniently using PC

software and a USB connector. The unit does not need a separate po-

wer supply and is supplied with power through the i2 bus.

BTI-200

BTI-200i2-bus PBX interfaceDimensions (W x H x D): 93 x 96 x 59 mm, top-hat rail mounting (6TE)Power supply: through i2 bus

PBX interface: Analogue a/bMFV dialling procedure (DTMF), at most 256 units with two numbers each


BTI-200

BTI-200 PBX interface 190.142.0 2

32

PC

i2AUDIO

Economical calling via graphical display

The display call system supports the quick, space-saving access admin-

istration of up to 256 residential units.

A display call system consists of the DCM-256 display call module, and

can optionally be extended with a DLM-256 12-call button module or

a DCI-256 LAN interface.

The name, additional information, appartement number and system

address of each resident is stored. Any resident can be selected by

searching the alphabetically sorted name list. If a DLM keypad module

is connected, the resident can be called directly by entering the phone

number. In combination with the keypad module, moreover, a code

lock function is possible with 2 independent switch contacts.

The DCM-256 is configured using the RS-232 interface on the back

side and the DCTERM PC software provided. Alternatively (in case of

frequent changes of tenant), the DCI-256 LAN interface can be con-

nected so that a connection can be established through a TCP/IP net-

work (Internet). This permits the remote maintenance of resident data

through a LAN network or, with appropriate routers, from the Internet.

If a DLM-256 keyboard module is connected, resident data – protected

by a numeric code – can also be maintained directly on site.

Modular display call system

Digital calling

DCM-256 DLM-256 DCI-256

DCM-256MODESTA display call moduleIlluminated graphical LC display with large text. 256 resident entries. Alphabetically sorted name list. Dynamic search speed if keys are held down. Animated operat-ing manual. Direct call button with additional keyboard expander (BTE-116) possible. RS-232 interface for data exchange, including SUB-D 9-pin data cable. PC software for convenient editing of resident data.

Power supply: 12V AC (15V DC) /350mA Temperature range: -20°C to + 70°C Dimensions (W x H x D): 120 x 120 x 39 mm

DLM-256MODESTA stainless steel keypad module Stainless-steel 12-key call button, flush mounting.Direct calling via telephone number entry. Code lock functions.

Temperature range: -20°C to +70°C Dimensions (W x H x D): 120 x 120 x 26 mm

DCI-256 LAN interfaceLAN interface for the DCM-256 display call module. RJ-45 Ethernet network connector. Web or telnet configuration.

Temperature range: -20°C to +70°C Dimensions (W x H x D): 70 x 24 x 38 mm

Perfectly suited for integration into our

MODESTA line (pages 84 - 93).


DCM-256

Direct call button

BTE-116Optional

DLM-256Optional

i2-BUS

DCI-256Optional

RS232

Configured using PC

TCP/IPNetwork


DCM, DLM and DCI

DCM-256 Display call module Stainl. st., matte 581.256.0 2DLM-256 Keypad module Stainl. st., matte 581.257.0 2DCI-256 LAN interface 150.715.0 2

33

6DVIDEO

i2-B

US

Syst

em

Central switchboard

The BVC-280 video concierge intercom, together with the "ELCOM

Concierge" PC software, is a convenient modern solution for central

switchboard functions like concierges or doormen.

Among its notable features are internal calls to and from any intercom,

acceptance and forwarding of door calls and manual activation of all

door stations.

The software included in the package permits uncomplicated and clear

operation of the system, as well as the use of a database including

speed dial and logging functions. The concierge software automati-

cally appears as a pop-up window when a call arrives, and provides

date and time of unanswered calls in a caller list.

The BVC-280 video concierge station is shipped from the factory on a

stainless steel table console, and can be combined with any i2 bus

video or audio intercoms manufactured in or after September 2007.

The PC is connected through an RS-232 interface, while the i2 bus is

connected on an RJ-45 connector cable.

Video concierge station

BVC-280

i2-BUS


Concierge software

RS232 interface

BVC-280 Concierge

PC

Device features Software features

Device features:- 4" (10 cm) colour TFT display. - 8 illuminated function keys, of which 4 can be pro-

grammed with special functions- Special functions: Manual camera activation and switch-

ing, intercom calls, parallel calls, access gates, switching function

- 12 harmonious ring tones, 6 of which are gong sounds. - Free assignment of ring tones to door, floor or intercom calls- Electronic adjustment of brightness, contrast, colour and

call volume- Call hold with control display- Automatic video activation upon call- Address configuration using rotary switch- High-quality table console with a stainless steel/glass

design- 2.8 m connector cable with RJ-45 plug,

3 m RS-232 connector cable- Housing of ABS plastic, in white

Software features:- Building station database with name assignment, speed

dial and memo field- Door station database with name assignment- Call list with callback function for unanswered calls- Can be connected manually to a door station- Intercom calls to the building stations- Door call forwarding to building stations- Door call ring in parallel with the building station can

be individually configured- Programming language: German/English- System requirements: Min. CPU 1GHz, RAM 256MB,

RS232, Win XP SP2, .NET 2.0

Video camera connectionBy connecting external CCS cameras, the concierge can appear on the screen for residents. In multiplex-coupler systems, the camera is connected through the BKM-143. In standard systems, the use of a BVU video converter is required. (Camera on page 22)

Concierge camera optional


BVC-280 for 6-wire video

BVC-280 Video concierge station 182.280.5 2

35

2DVIDEO

i2-B

US

2-w

ire

Vide

o Sy

stem

Video communicationsThe intelligent communications bus. Call, view, speak and open with two wires and familiar ELCOM quality. Simple, fast installation. Perfect for renovations and upgrades. The futures market for electrical crafts-manship.

36

HAT-402

HAT-402

HAT-402

TÖ

4+n

1 1 1 1

2

4

2DVIDEO

2

The intelligent communications bus

i2-BUS audiointercom

BVV-501/BVV-521

BVV-501/BVV-521


BAA-500/BAA-520

BVF-500

BVF-560

OLD (example):1+n system

NEW:2-wire video

distribution board

(n = number of intercoms)

For problem-free upgrades, a few prerequisites must be satisfied. Please discuss the planned design with us in advance.

We can provide you with valuable tips and advice.

2

2

2

2

37

i2-B

US

2-w

ire

Vide

o Sy

stemCall - view - speak - open ...

The new i2 bus 2-wire video technology

The i2 bus 2-wire video system is an advance-

ment of the familiar i2 bus audio system and

offers all the advantages of that technology.

All functions - it can now also transmit exclu-

sively a video signal through the two wires of

the bus line.

Mixed video/audio operation

Special audio decouplers permits the i2 bus

2-wirevideo system to support mixed modes

with ELCOM audio telephones. This permits

residential property companies to provide

their tenants with a needs-oriented offering.

System performance and components

The maximum expansion level of the i2 bus

2-wire video system permits the operation of

up to 32 video telephones and up to 16 door

stations.

The powerful video system using only two wires for up to 32 residential units. Ideal for renovations or modern new ins-

tallations. The technology permits the integration of audio code components and thus a needs-oriented mixed system

that makes video upgrades at a later date easy.

all functions with two wires

ideal for renovation and quick initial installations

use existing cabling

reverse-polarity-safe connection

fast installation

more convenience, utility and security

new dress for old intercom systems

planning support when using old flush-mounted boxes

■

■

■

■

■

■

■

■

Custom-fabricated door stations

With our ACCENTS line, you'll find even the

modernisation of the entryway outdoors very

easy, because we can fabricate a new door

station exactly to your specifications. Existing

flush-mounted boxes and wall openings can

be used without costly masonry and plaster

work.

38

2DVIDEO


TKV-260

Video table consolefor BVF-260/560 AP. For use in the office. 3m con-nector cable with RJ-45 plugs included in delivery.

Note: BVV-501/521 video branch required.

BVF-560 AP

Hands-free video intercom, wall-mountedPlease assemble the BVF-560 AP from the following components:

BVF-560/BE Video hands-free intercom, Basic unitBVF-APG Wall-mounted housing of your choiceDesigner faceplate of your choice (see page 39)

ELCOM presents: Functionality and comfort in glass and aluminium.

Excellent design, high-quality materials, convenient operation, out-

standing acoustical properties and a variety of system functions make

the BVF-260 hands-free video intercom the unit that it is: A unit that

leaves nothing to be desired.

BVF-560 AP

The new wall-mounted model for sophisticated residential properties

. brilliant high-resolution 10cm (4") LCD display . High-quality designer faceplate . convenient touch sensor button operation . Front speaker for outstanding acoustics . Available in modular designs in wall- and flush-mounted versions . Very extensive system functions

Additional technical features: Brilliant display with a high resolution Good view at side angles Automatic video image display upon call Touch sensor button operation "On Screen" menu in German and English Door opening, call acceptance, manual camera activation Internal calls to other stations Special functions can be programmed, including: internal call, concierge call, call forwarding, parallel call, Portamat, switching function Name display for door and internal connections 16 ring tone melodies that can be assigned to door, storey or internal calls Electronic adjustment of volume and ring tone volume, Brightness, contrast, and colour Status displays for calls and intercom calls Different LED control displays configurable, for example for the mute function Configurable video image storage and/or special functions Full- and half-duplex hands-free calls (switchable) Blocked against visual/audio monitoring Integrated potential-free control relay 3 video telephones can be used in parallel Forwarding of storey calls to parallel video telephones Rotary switch for address configuration, one-man start-up

Dimensions, wall-mounted variant (W x H x D): 135 x 220 x 30 mm


Basic module 6-wire video system for BVF-560

BVF-560/BE Video hands-free intercom Basic unit 183.560.0 2

Wall-mounted housing for BVF-560

BVF-APG-SI Wall-mounted housing silver 183.261.1 2BVF-APG-SW Wall-mounted housing black 183.261.2 2

Video table console for BVF-560 AP


39

2DVIDEO

i2-B

US

2-w

ire

Vide

o Sy

stem

Designer faceplate

Faceplate, blackBVF-260/E-SW, squareBVF-260/R-SW, rounded

Faceplate, whiteBVF-260/E-WS, squareBVF-260/R-WS, rounded

Faceplate, umberBVF-260/E-BR, squareBVF-260/R-BR, rounded

Faceplate, mint greenBVF-260/E-GN, squareBVF-260/R-GN, rounded

Faceplate, graphiteBVF-260/E-GR, squareBVF-260/R-GR, rounded


For a perfect finish to your residential space, we recommend the flush

mounting of the BVF-260. This unit blends discreetly into the back-

ground and the design of the room, with an impressively refined desi-

gner faceplate.

. Dimensions of front plate (W x H): 135 x 220 mm . Dimensions of flush-mounted boxes (W x H x D): 125 x 195 x 55 mm

BVF-560 UP

The flush-mounted variant for harmonic integration

BVF-560 UP

Hands-free video intercom, flush-mountedPlease assemble the BVF-560 UP from the following components:

BVF-560/BE Video hands-free intercom, Basic unit (see page 38)BVF-UPK-UNI Flush-mounted housingDesigner faceplate of your choice

Glass faceplateBVF-260/G-WS, whiteBVF-260/G-SW, black


Basic module 6-wire video system, Flush-mounted box for BVF-560

BVF-560/BE Video hands-free intercom Basic unit 183.560.0 2BVF-UPK-UNI Flush-mounted box 300.090.1 2

Designer faceplate, square

BVF-260/E-SW Designer faceplate, square black 183.262.2 2BVF-260/E-WS Designer faceplate, square white 183.262.3 2BVF-260/E-BR Designer faceplate, square umber 183.262.4 2BVF-260/E-GN Designer faceplate, square mint green 183.262.5 2BVF-260/E-GR Designer faceplate, square graphite 183.262.6 2


Designer faceplate, rounded corners

BVF-260/R-SW Designer faceplate, rounded black 183.264.2 2BVF-260/R-WS Designer faceplate, rounded white 183.264.3 2BVF-260/R-BR Designer faceplate, rounded umber 183.264.4 2BVF-260/R-GN Designer faceplate, rounded mint green 183.264.5 2BVF-260/R-GR Designer faceplate, rounded graphite 183.264.6 2

Full glass designer faceplates, rounded corners

BVF-260/G-SW Full glass faceplate, round black 183.266.2 2BVF-260/G-WS Full glass faceplate, round white 183.266.3 2

40

2DVIDEO

Hands-free colour video intercom

The BVF-500 is attractive for its compact design. The clear and harmo-

nious lines of the front part characterise the dynamically flat design,

making the effort of flush mounting superfluous. The latest in TFT

display technology and a screen diagonal of 6 cm ensure crisp, sharp

contours without the slightest flicker, as well as excellent naturally col-

oured image quality.

. 6 cm (2.5") colour TFT display . Brilliant colour quality, good view at side angles . Automatic and manual activation of display . Door opening, call acceptance . LED-lit function keys . Ring tone can be enabled/disabled . Ring tone volume adjustable . 16 ring tone melodies . LED status displays for calls and intercom calls . Full- and half-duplex hands-free calls (switchable) . Wall-mounted . Cost-effective one-man installation


Additional technical features- Free assignment of ring tones to door,

floor or intercom calls- Manual activation of the last door station

calling (can be disabled)- Automatic call end after 3 minutes- Address configuration using rotary switch- 3 intercoms can be used in parallel- Wall-mounted

- Colour: white- Dimensions (W x H x D): 100 x 192 x 35mm

Video table console (Shown with BVF-500)For use in the office. Suitable for BVF-200 and BVF-500 hands-free intercoms

3 m connector cable with RJ-45 plugs included in delivery.

Note: BVV-501/521 video branch required.

TKV-200

BVF-500

BVF-500



BVF-500 for 2-wire video

BVF-500 Hands-free colour video intercom 183.500.0 2

TKV-200 Table console for BVF-200/500


41

2DVIDEO

i2-B

US

2-w

ire

Vide

o Sy

stemHands-free audio intercom

Attractive hands-free audio intercom for direct connection to the i2

bus 2-wire video system. Outstanding for use in cost-effective mixed

audio/video environments. Fast installation with rotary encoder addres-

sing and one-man start-up.

. Integrated audio decoupler for 2-wire video . Full- and half-duplex hands-free calls (switchable) . 4 function keys . 3 intercoms can be used in parallel . Call terminator with control display . 16 ring tone melodies . Intra-floor call forwarding through the i2 bus . Call waiting if a connection is active . Listening-in prevention . Wall-mounted . Cost-effective one-man installation


TKA-UNI

Tabletop audio console(Shown with BFT-500)For use in the office. Suit-able for the BFT-500/200 and BHT-200/280.


Note: BAA-500/520 audio decoupler required.

BFT-500

Attractive in form and function.


BFT-500 for 2-wire video

BFT-500 Hands-free intercom white 171.500.0 2

TKA-UNI Table console for BFT-500

TKA-UNI Table console (audio) 130.120.0 2

42

2DVIDEO

Outdoor colour cameras

CCS-500/-510

CCS-500 / -510

CCS rod cameras can be discretely hidden to provide unobtrusive

monitoring of the entry area. Here, the CCS-510 long-range out-

door camera is particularly well suited for a detection area over long

distances.

. Stable, weather-resistant stainless steel housing . For discreet, inconspicuous placement . Flexibly adjustable in every direction

General installation instructions for exterior cameras:


CCS-500Outdoor colour camera in stainless steel housing for 2-wire videoMechanically adjustable: +/-90° horizontal/verticalOpening angle: 63° horizontal, 49° verticalResolution: 320.000 PixelLight sensitivity: 0,2 Lux / F2.0

Dimensions, Socket: Ø 104 x T 25 mm Dimensions, Camera rod: Ø 24 x L 83 mm

CCS-510Long-range colour outdoor camera in stainless steel housing for 2-wire videoTechnical data as for the CCS-500, but:Opening angle: 21° horizontal, 16° vertical


CCS Outdoor cameras for 2-wire video

CCS-500 Stainless steel colour outdoor camera 181.450.0 2CCS-510 Remote stainl. steel col. outdoor camera 181.451.0 2

43

2DVIDEO

i2-B

US

2-w

ire

Vide

o Sy

stemBuilt-in camera with door speaker

BTC-500

The new built-in camera with door speaker has a mechanical adjust-

ment range of nearly 180°. Even under unfavourable environmental

conditions, the wide pivot range allows ideal adjustment of the camera

in any direction. After dark, the automatic switch from colour to B/W

mode and the built-in infrared lighting ensures optimum viewing. Com-

bining the camera and speaker saves you space, or makes room for

additional functional modules.

. Feedback suppression using electronic speech control . Volume control . Address configuration using rotary switch . Terminal for light buttons . Door opener function at any time (can be switched) . Acknowledgement tone when call button pushed (can be switched)

BTC-500




BTC-500Camera/door speaker combination with integrated IR illumination for 2-wire videoAutomatic switching from colour to B/W by low illumination.

Mechanically adjustable: +/- 47º horizontal/verticalOpening angle: 80º horizontal, 60º verticalResolution: 320.000 PixelsLight sensitivity: 0,1 lux/F2.0



BTC Camera module for 2-wire video

BTC-500 Built-in camera/Door speaker COLOUR 181.650.0 2

44

BVF-500

2DVIDEO


2-wire video series circuit


DISTRIBUTION BOARD

MAIN ENTRY

BVF-560

This is a schematic functional view. Please consult our i2 bus 2-wire video system manual for planning and installation.

ATTENTION

i2 bus 2-wire video

MULTIPLE ENTRANCES


entrance


entrance

Floor call button

NTR-812Transformer

BVF-500

Floor call button

BVF-500

Floor call button

NGV-500Power supply

BLA-100Light timer

BVF-560

Floor call button

Floor call button

BVF-500

Floor call button

BVV-501/BVV-521

2-wire video branch line

BVV-502/4Distributor

Floor call button

2-wire video star wiring configuration

BVV-501/BVV-521

BVV-501/BVV-521

BTC-500Camera

BTC-500Camera

RSR-500Decoupler

BAA-520Decoupler

BAA-500Decoupler

2-wire video/audio decoupler

i2 bus 2-wire video i2-BUS audio

SIDE ENTRANCE

i2 bus 2-wire video


BTC-500Camera

BVF-500

BVF-500 BFT-200

BFT-200

BHT-200

BHT-280

i2 b

us f

unct

ion

sche

me

2-w

ire

vide

o sy

stem


Optional wiring

Optional wiring

Optional wiring

BVV-501/BVV-521

BTC-500Camera


entrance

BVV-522/4

45

i2-B

US

2-w

ire

Vide

o Sy

stem

Overview


BSV-500Line power supplyfor the i2 bus 2-wire video system for the power sup-ply of the door speaker and camera. Integrated audio decoupler. Overload and overheating protection.

Input: 28 VDC (NGV-500)Output: i2-BUS 2D-VideoDim.: 52x92x63mm (W/H/D)Space requirements: 3 TE

NGV-500Power supplyfor supply of the BSV-500.

Input: 230 VACOutput: 28 VDC / 1.25ADim.: 52x93x68mm (W/H/D)Space requirements: 3 TE


NTR-812Power transformerSafety transformer with PTC fuse. For power supply of the BTC-500.


BTE-116Call button expander For the connection of 16 call buttons. Addressing using rotary encoder. Simple con-nection of call buttons. Plug-gable connector cable to the BTC-500 (Length: 300 mm). At most 16 bus key expand-ers can be cascaded.


BVV-502, BVV-522Two-way video distributorFor video distribution of an incoming bus line to two outgoing bus lines. Alternative to the attach-ment of 2 door stations.

BVV-502: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BVV-522: UP versionDim.:42x51x16mm (W/H/D)

BVV-504, BVV-524Four-way video distributorFor video distribution of an incoming bus line to four outgoing bus lines.Alternative to the attach-ment of 4 door stations.

BVV-504: HS version, 2 TEDim.: 35x94x58mm (W/H/D)BVV-524: UP versionDim.: 42x51x16mm (W/H/D)

BVV-501, BVV-521Video branchFor the connection of a branch line to the video bus line. Alternative to the attachment of a (floor) door station.

BVV-501: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BVV-521: UP versionDim.: 42x51x16mm (W/H/D)

BAA-500, BAA-520Audio decouplerFor decoupling the i2 audio bus from the 2-wire video bus for the operation of audio components. 2-wire video loop.

BAA-500: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BAA-520: UP versionDim.: 42x51x16mm (W/H/D)

RSR-500Call switching relay and audio decouplerFor installation into the BHT-200, BHT-280, or BVF-200 audio intercoms to permit mixed operation in 2-wire video systems. Includes potential-free contact with up to 24V, 1A


BVF-500 SeriesVideo intercoms for 2-wire video.Details: see page 38 - 41

BTC/CCS-500Camera/door speakerfor 2-wire video.Details: see page 42 - 43

BER-540Control relay (universal)For function-specific swit-ching and control functions like: Storey call function, door release relay, light relay, function relay, door call indicator and direct door release/light control.

Contact rating: max.24V/1ADim.: 42x51x16mm (W/H/D)


Power supply

BSV-500 Line power supply 2-wire video Top-hat rail 3 170.415.0 2NGV-500 Video power unit 2-wire video Top-hat rail 3 231.415.0 2NTR-812 Power transformer i2-BUS Top-hat rail 2 120.100.4 2

Call button expander

BTE-116 Call button expander i2-BUS Fastening tray - 170.311.6 2

Distributor and connection

BVV-502 2-way video distributor 2-wire video Top-hat rail 1 180.650.2 2BVV-522 2-way video distributor 2-wire video for UP box - 180.652.2 2BVV-504 4-way video distributor 2-wire video Top-hat rail 2 180.650.4 2BVV-524 4-way video distributor 2-wire video for UP box - 180.652.4 2BVV-501 Video branch 2-wire video Top-hat rail 1 180.650.1 2BVV-521 Video branch 2-wire video for UP box - 180.652.1 2

Switch relay

BER-540 Switch relay, universal 2-wire video for UP box - 190.254.0 2

Decoupler for i2 bus audio

BAA-500 Audio decoupler 2-wire video Top-hat rail 1 180.650.0 2BAA-520 Audio decoupler 2-wire video for UP box - 180.652.0 2

Decoupler and call switch relay for i2 bus audio

RSR-500 Audio decoupler, Call relay 2-wire video for BHT-Built-in - 190.185.0 2

46

2DVIDEO

Mixed audio/video operation 2-wire video

Mixed operation with BFT-500


DISTRIBUTION BOARD

MAIN ENTRY

BFT-500

ATTENTION: This is a schematic functional view. Please consult our i2 bus 2-wire video system manual for planning and installation.

i2 bus 2-wire video

Intercom (audio)

NTR-812Transformer

BFT-500

Intercom (audio)

BVF-500

NGV-500Power supply

BLA-100Light timer

BHT-280

Through decoupler

Through decoupler

BVF-500

BAA-500/BAA-520

Mixed operation with decoupler Mixed operation with decoupler

BAA-500/BAA-520

BVV-501/BVV-521

BAA-500Decoupler

Audio line through decoupler

i2 bus 2-wire video i2-BUS audio


BTC-500Camera

i2 b

us f

unct

ion

sche

me

Aud

io/v

ideo

mix

ed m

ode


Optional wiring

Optional wiring

Optional wiring

NSG-200

i2-BUS Audio

BSR-140Relay

BSR-200Relay


BVF-500

RSR-500Decoupler

Through decoupler

BHT-200

Audio decoupling from bus line power supply

i2-BUS Audio

Decoupling of an audio line

The option of audio decoupling in the i2 bus 2-wire video system gives you the flexibility you need for economical installation and extends the system with the use of current i2 bus audio components. This provides you, for example, with audio telephones, secondary signal device, control relays and a connection to telephone systems. The audio bus can be decoupled at the line power supply or using BAA/RSR modules.

Audio decoupling in 2-wire video system

BHT-200 BHT-280 Storey door station audio

BTI-200

47

i2-B

US

2-w

ire

Vide

o Sy

stem

BAA-500, BAA-520Audio decouplerFor decoupling the i2 audio bus from the 2-wire video bus for the operation of audio components. 2-wire video loop.

BAA-500: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BAA-520: UP versionDim.: 42x51x16mm (W/H/D)

RSR-500Call switching relay and audio decouplerFor installation into the BHT-200, BHT-280, or BVF-200 audio intercoms to permit mixed operation in 2-wire video systems. Includes potential-free contact with up to 24V, 1A


Mixed audio/video operation 2-wire video

Overview


BFT-500hands-free intercomHands-free conversation in full or half duplex (techni-cal data on page 41).

Ready to connect for 2D video, decoupler integrated.


i2 bus 2-wire audio components, operation only with audio decoupler

BLA-100Lighting timer Intelligent bus-based stair-well lighting automation. Components from the i2 bus audio system. More information on page 25.

The BAA-500/520 decoup-ler is also needed.

BSR-140 Control relayFor function-specific switch ratings. Components from the i2 bus audio system. More information on page 25.


BSR-200Control relayWith two potential-free switch ratings. Compo-nents from the i2 bus audio system. More infor-mation on page 25.


BTI-200 PBX interfaceComponents from the i2 bus audio system. More information on page 31.


BHT-280 Comfort intercomComponents from the i2 bus audio system. More information on page 21.

The BAA/RSR decoupler is also needed.

BHT-200 IntercomComponents from the i2 bus audio system.More information on page 21.

The BAA/RSR decoupler is also needed.

NSG-200 Secondary signal deviceComponents from the i2 bus audio system.More information on page 19.



Decoupler for i2 bus audio

BAA-500 Audio decoupler 2-wire video Top-hat rail 1 180.650.0 2BAA-520 Audio decoupler 2-wire video for UP box - 180.652.0 2

Decoupler and call switch relay for i2 bus audio

RSR-500 Audio decoupler, Call switch. 2-wire video for BHT-Built-in - 190.185.0 2

Hands-free intercom for 2-wire video system

BFT-500 Hands-free intercom 2-wire video white - 171.500.0 2

i2-BUS Intercom/PBX Interface, operation only with audio decoupler

BHT-200 Intercom 2-wire audio white - 170.200.0 2BHT-280 Intercom, Comfort 2-wire audio white - 170.280.0 2BTI-200 Telecommunicat. interface 2-wire audio Top-hat rail 6 190.142.0 2

i2-BUS components, operation only with audio decoupler

BSR-140 Switch relay, multifunctional 2-wire audio Top-hat rail 2 190.115.0 2BSR-200 Switch relay, 2 swit. contacts 2-wire audio Top-hat rail 3 190.113.0 2BLA-100 Lighting timer 2-wire audio Top-hat rail 3 190.110.0 2

49

1+n

1+n

Syst

em

Communications systemsOver the last two decades, the 1+n technology has become a proven standard technology for residential construction. As a particularly cost-effective and user-friendly system, the use of 1+n technology in audio communications facilities guarantees a high degree of security and func-tionality.

50

1+n

The 1+n audio intercom is a discrete, elegant solution for securing the

living area and access control. The HAT-402's notable features in-

clude outstanding speech transmission and user-friendly operating

convenience.

HAT-402

Intercom

HAT-402 TKA-UNI

HAT-402Intercom- 3-level call volume con-

trol with call terminator- LED status display for calls- Potential-free call button - Convenient magnetic

holder for handset


TKA-UNITabletop audio console(Shown with HAT-402)

For use in the office. 3 m connector cable with RJ-45 plug included.

NSG-802Secondary signal deviceMulti-tone calls. Wall-mounted, flat design, plastic housing, available in white.Dimensions (W x H x D): 129 x 129 x 33 mm

NSG-802

Designation System Colour Item no. DG

Intercom

HAT-402 Intercom 1+n white 130.810.0 2

Accessories

TKA-UNI Table console - - 130.120.0 2NSG-802 Sec. signal device 1+n white 130.901.0 2

51

1+n

Syst

em

RSR-402Call switch relay for HAT-402.

ERG-402Tone generator forstorey callGenerates a ringing sound to differentiate between calls from the door to the floor or to the apartment.4 call tones configurable with DIP switch.Top-hat rail mounting.


RMS-4HS, RMS-6HS and RMS-10HS Privacy feature/abuse block for 4, 6 or 10 units (modu-lar extensibility). Enables the voice connection only to the last intercom called; the others remain blocked against eavesdroppers. Top-hat rail mounting.


ELA-402Door electronics For installation in letter box systems and ESTA/STABILA door stations. Volume con-trol for microphone and speaker. Integrated alpha tone generator for electronic calling.


Overview

System components

NTR-812Power transformerSafety transformer with PTC fuse. Top-hat rail mounting.



Designation System Variant TE* Item no. DG

Door electronics

ELA-402 Door electronics 1+n - - 120.431.0 2

Privacy feature

RMS-4HS Privacy feature, 4 units 1+n Top-hat rail 3 140.020.4 2RMS-6HS Privacy feature, 6 units 1+n Top-hat rail 3 140.020.6 2RMS-10HS Privacy feature, 10 units 1+n Top-hat rail 3 140.021.0 2

Floor call generator

ERG-402 Tone generator (storey call) 1+n Top-hat rail 3 120.102.4 2

Power supply

NTR-812 Power transformer - Top-hat rail 2 120.100.4 2

Call switch relay

RSR-402 Call switch relay 1+n for HAT-402 - 140.004.0 2

52 Photo: SchwörerHaus KG

53

Sets

and

Kit

s

As one of the leading manufacturers of door intercom systems, we offer an excellent selection of complete sets with door stations or system kits for the upgrade of existing systems to 1+n and i2 bus technology.

They can be configured quickly and inexpensively, and are suitable for both new construction and renovations.

Complete systems

54

6DVIDEO

VCZFlush-mounted video set for 1 or 2 unitsFront (W x H): 140 x 260 mm, UPK (W x H x D): 120 x 240 x 55 mm

The complete set (6-wire video) includes:- TVM-Set Flush-mounted door station- BVF-260 AP Video hands-free intercom (1 – 2, depending on the set), wall-mounted version with white designer faceplate and silver housing- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer

Stainless steel front plate in flush-mounted variant, 2 mm thick front plate, matte brushed surface,

special security screws, flush-mounted box 55 mm in depth, with ZENTRA keypad (microswitch

integrated white LED illumination, stainless steel push bar, name plate replaceable from the front).

VCZ - ESTA flush-mounted, matte brushed stainless

ESTA flush-mounted video sets with BVF-260 AP

The ESTA video combination with the BVF-260 AP is very high-quality,

exclusive equipment for the security of single- or two-family houses.

The BVF-260 AP video hands-free intercom is attractive for its elegant

design and high-quality glass/aluminum designer faceplate. With a lar-

ge 10cm LCD display, convenient touch sensor operation and a great

deal of functionality, it leaves nearly nothing to be desired.

The attractive ESTA stainless steel door station, in either wall- or flush-

mounted variants, is equipped with modern ZENTRA keypad. For the

design of your entry area, this variant offers a high-class, long-lasting

form of door communication.

For optimum monitoring, the colour camera module has a mechani-

cally adjustable pivoting range of almost 180°. Automatic B/W mode

and infrared lighting adapt the view to any lighting conditions.

All the details of the BVF-260 AP video hands-free intercom

can be found on pages 16 and 17.

Elegant and convenient.


For 1 unit

VCZ-1EM Video set, Stainless steel Flush-mounted 106.361.8 2

For 2 units

VCZ-2EM Video set, Stainless steel Flush-mounted 106.362.8 2

55

Sets

and

Kit

s

VCAWall-mounted video set for 1 or 2 unitsDoor station (W x H x D): 135 x 232 x 35 mm

The complete set (6-wire video) includes:- TVA-Set Wall-mounted door station- BVF-260 AP Video hands-free intercom (1 – 2, depending on the set), wall-mounted version with white designer faceplate and silver housing- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer

Stainless steel front plate in wall-mounted variant, housing complete in 2mm material thickness, matte brushed

surface, flap mechanism and spring closure, housing depth only 35 mm, with ZENTRA keypad (microswitch


VCA - ESTA wall-mounted, matte brushed stainless

ESTA wall-mounted video sets with BVF-260 AP


For 1 unit

VCA-1EM Video set, Stainless steel Wall-mounted 106.461.8 2

For 2 units

VCA-2EM Video set, Stainless steel Wall-mounted 106.462.8 2

56

6DVIDEO

ESTA flush-mounted video sets with BVF-200

VFZFlush-mounted video set for 1 or 2 unitsFront (W x H): 140 x 260 mm, UPK (W x H x D): 120 x 240 x 55 mm

The complete set (6-wire video) includes:- TVM-Set Flush-mounted door station- BVF-200 Video hands-free intercom (1 – 2, depending on the set)- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer

Stainless steel front plate in flush-mounted variant, 2 mm thick front plate, matte brushed surface,

special security screws, flush-mounted box 55 mm in depth, with ZENTRA keypad (microswitch


VFZ - ESTA flush-mounted, matte brushed stainless

The complete ESTA video package is a sophisticated basic installation

for conveniently securing single- and multi-family residential buildings.

With its dynamic design, excellent image quality and convenient hands-

free function, the BVF-200 provides all the features you need for secu-

re video communication.





For optimum monitoring, the colour camera module has a mechani-

cally adjustable pivoting range of almost 180°. Automatic B/W mode

and infrared lighting adapt the view to any lighting conditions.

All details for the BVF-200 video hands-free intercom

can be found on page 18.



For 1 unit

VFZ-1EM Video set, Stainless steel Flush-mounted 108.161.8 2

For 2 units

VFZ-2EM Video set, Stainless steel Flush-mounted 108.162.8 2

57

Photo: SchwörerHaus KG

Sets

and

Kit

s

VFAWall-mounted video set for 1 or 2 unitsDoor station (W x H x D): 135 x 232 x 35 mm

The complete set (6-wire video) includes:- TVA-Set Wall-mounted door station- BVF-200 Video hands-free intercom (1 – 2, depending on the set)- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer




VFA - ESTA wall-mounted, matte brushed stainless

ESTA wall-mounted video sets with BVF-200


For 1 unit

VFA-1EM Video set, Stainless steel Wall-mounted 108.461.8 2

For 2 units

VFA-2EM Video set, Stainless steel Wall-mounted 108.462.8 2

58

1+n

The ESTA 1+n audio set is first-class basic equipment for securing sing-

le- and multi-family residential buildings.





With its resilient 1+n technology, naturally including a privacy feature

(for buildings with two or more families), it allows the use of the exist-

ing bell wiring, ensuring simple, cost-effective installation.

The HAT-402 intercom has a call controller/terminator, LED functional

display for talking and door opening, door opener button and a poten-

tial-free button for a custom purpose.

Technical data for the intercom can be

found on page 50.

ESTA flush-mounted audio sets with HAT-402

Attractive and durable

ASZFlush-mounted audio set for 1 or 2 unitsFront (W x H): 140 x 260 mm, UPK (W x H x D): 120 x 240 x 55 mm

The complete set includes:- TVM-Set Flush-mounted door station- HAT-402 Intercom (1 – 2, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)

ASZ - ESTA flush-mounted, matte brushed stainless

Stainless steel front plate in flush-mounted variant, 2 mm thick front plate, matte brushed

surface, special security screws, flush-mounted box 55 mm in depth, with ZENTRA keypad (micro-

switch integrated white LED illumination, stainless steel push bar, name plate replaceable from the front).


For 1 unit

ASZ-1EM 1+n Audio set, Stain. steel Flush-mounted 100.071.8 2

For 2 units

ASZ-2EM 1+n Audio set, Stain. steel Flush-mounted 100.072.8 2

59

Sets

and

Kit

s

ESTA wall-mounted audio sets with HAT-402

AZAWall-mounted audio set for 1 or 2 unitsDoor station (W x H x D): 135 x 232 x 35 mm

The complete set includes:- TVA-Set Wall-mounted door station- HAT-402 Intercom (1 – 2, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)

AZA - ESTA wall-mounted, matte brushed stainless





For 1 unit

AZA-1EM 1+n Audio set, Stain. steel Wall-mounted 100.091.9 2

For 2 units

AZA-2EM 1+n Audio set, Stain. steel Wall-mounted 100.092.9 2

60

1+n

The complete STABILA package is the ideal basic equipment for the

security of single- and multi-family residential buildings. With its resil-

ient 1+n technology, naturally including a privacy feature (for buildings

with two or more families), it allows the use of the existing bell wiring,

ensuring simple, cost-effective installation.

The robust STABILA aluminium door station is optionally available for

flush or wall mounting and is equipped with the modern ZENTRA call

button. A durable and nearly indestructible combination.

The HAT-402 intercom has a call controller/terminator, LED functional

display for talking and door opening, door opener button and a poten-

tial-free button for a custom purpose.

Technical data for the intercom can be

found on page 50.

STABILA flush-mounted audio sets with HAT-402

ASU - STABILA flush-mounted audio set

Aluminium front plate, 3 mm, special security screws, flush mounted box 55 mm in

depth, with ZENTRA call button (microswitch integrated white LED illumination,

stainless steel push button, name plates replaceable from the front).

ASU Flush-mounted audio set for 1 or 2 unitsFront (W x H): 140 x 260 mm, UPK (W x H x D): 120 x 240 x 55 mm

The complete set includes:- TUP-Set Flush-mounted door station- HAT-402 Intercom (1 – 2, depending on the set)- ELA-402 Door electronics- NTR-812 Power transformer- RMS Privacy feature (for 2 or more units)

EV1 – Anodised aluminium RAL 9016 Traffic white

Robust and economical


For 1 unit

ASU-1EL 1+n Audio set EV1 100.051.1 2ASU-1WS 1+n Audio set RAL 9016 100.051.4 2

For 2 units

ASU-2EL 1+n Audio set EV1 100.052.1 2ASU-2WS 1+n Audio set RAL 9016 100.052.4 2

61


Sets

and

Kit

s

STABILA wall-mounted audio sets with HAT-402

Aluminium front plate, 3 mm, special security screws, frame system 42 mm in depth,

with ZENTRA call button (microswitch integrated white LED illumination, stainless steel

push button, name plates replaceable from the front).

ASP Wall-mounted audio set for 1 or 2 unitsDoor station (W x H x D): 136 x 256 x 42 mm

The complete set includes:- TAP-Set Wall-mounted door station- HAT-402 Intercom (1 – 2, depending on the set)- ELA-402 Door electronics- NTR-812 Power transformer- RMS Privacy feature (for 2 or more units)

ASP - STABILA wall-mounted audio set

EV1 – Anodised aluminium RAL 9016 Traffic white


For 1 unit

ASP-1EL 1+n Audio set EV1 100.071.1 2ASP-1WS 1+n Audio set RAL 9016 100.071.4 2

For 2 units

ASP-2EL 1+n Audio set EV1 100.072.1 2ASP-2WS 1+n Audio set RAL 9016 100.072.4 2

62

1+n

1+n i2AUDIO

1+n audio kits

By using the existing bell wiring, the 1+n audio kits can be installed

easily and inexpensively and are particularly problem-free in combina-

tion with all ELCOM letter box systems and door stations.

This makes 1+n audio kits ideal for the renovation

of existing 1 – 2 family houses.

AEKAudio kit, 1+n

available for 1 – 2 units.

Complete kit includes (without door station):- HAT-402 Intercom (1 – 2, depending on the set)- ELA-402 Door electronics- NTR-812 Power transformer- RMS Privacy feature (for 2 or more units)

AEK - audio kit 1+n

1+n kits: Ideal for cost-effective renovation. i2 bus kits: Ideal for quick, modern installation.

With our audio kits, we offer the ability to configure entire residential systems quickly and effectively.

Available in 1+n variant:

- AEK (with HAT-402 intercom, see page 50)

Available in the i2 bus variants:

- AKG (without intercoms, intercoms selectable, pages 19 and 21)

- AKB (with BHT-200 intercom, see page 21)

- AKF (with BFT-200 hands-free intercom, see page 19)

(n = number of intercoms)

HAT-402

4+n

Distribution board

Door release

1 1 1 1

2

4

Door release2

BHT-200

2

2

Distribution board


For 1 unit

AEK-1 1+n audio kit 1 unit 100.014.1 2

For 2 units

AEK-2 1+n audio kit 2 unit 100.014.2 2

63

i2AUDIO

i2AUDIO

i2AUDIO Se

ts a

nd K

its

i2 bus audio sets

AKF - audio kit, i2 bus, hands-free

AKB - audio kit, i2 bus

AKG - basic audio kit, i2-BUS

AKFAudio kit, i2 bus

Available for 1 – 18 units.

Complete kit includes (without door station):- BFT-200 Hands-free inter-

com (number of units)- ELA-100 Door electronics- BTE-116 Call button

expander- BSV-100 Line power

supply- NTR-812 Power

transformer

AKBAudio kit, i2 bus

Available for 1 – 18 units.

Complete kit includes (without door station):- BHT-200 Intercom

(number of units)- ELA-100 Door

electronics- BTE-116 Call button

expander- BSV-100 Line power

supply- NTR-812 Power

transformer

AKGBasic audio kit, i2 bus

Electronic package for 1 – 16 units.

Basic kit includes (without door station or intercoms):- ELA-100 Door electronics- BTE-116 Call button expander- BSV-100 Line power supply- NTR-812 Power transformer


Serial AKB

AKB-01 i2 bus audio kit 1 unit 100.190.1 2AKB-02 i2-buS audio kit 2 units 100.190.2 2AKB-03 i2 bus audio kit 3 units 100.190.3 2AKB-04 i2 bus audio kit 4 units 100.190.4 2AKB-05 i2 bus audio kit 5 units 100.190.5 2AKB-06 i2 bus audio kit 6 units 100.190.6 2AKB-07 i2 bus audio kit 7 units 100.190.7 2AKB-08 i2 bus audio kit 8 units 100.190.8 2AKB-09 i2 bus audio kit 9 units 100.190.9 2AKB-10 i2 bus audio kit 10 units 100.191.0 2AKB-11 i2 bus audio kit 11 units 100.191.1 2AKB-12 i2 bus audio kit 12 units 100.191.2 2AKB-14 i2 bus audio kit 14 units 100.191.4 2AKB-15 i2 bus audio kit 15 units 100.191.5 2AKB-16 i2 bus audio kit 16 units 100.191.6 2AKB-18 i2 bus audio kit 18 units 100.191.8 2


Serial AKG

AKG-01/16 basic audio kit 1-16 units 100.200.0 2


Serial AKF

AKF-01 i2 bus audio kit 1 unit 100.180.1 2AKF-02 i2 bus audio kit 2 units 100.180.2 2AKF-03 i2 bus audio kit 3 units 100.180.3 2AKF-04 i2 bus audio kit 4 units 100.180.4 2AKF-05 i2 bus audio kit 5 units 100.180.5 2AKF-06 i2 bus audio kit 6 units 100.180.6 2AKF-07 i2 bus audio kit 7 units 100.180.7 2AKF-08 i2 bus audio kit 8 units 100.180.8 2AKF-09 i2 bus audio kit 9 units 100.180.9 2AKF-10 i2 bus audio kit 10 units 100.181.0 2AKF-11 i2 bus audio kit 11 units 100.181.1 2AKF-12 i2 bus audio kit 12 units 100.181.2 2AKF-14 i2 bus audio kit 14 units 100.181.4 2AKF-15 i2 bus audio kit 15 units 100.181.5 2AKF-16 i2 bus audio kit 16 units 100.181.6 2AKF-18 i2 bus audio kit 18 units 100.181.8 2

64

6DVIDEO

6DVIDEO

6DVIDEO

The modular system for upgrades and new installations

ELCOM video kits are an ideal starting point for simple new installation of video systems or conversion of existing audio systems*. They are exceed-

ingly well suited for WINX, ESTA and STABILA door stations and letter box systems, which we can gladly extend with a video preparation free of charge.

* Depending on the cabling already available

VKG-200/BTC - Basic kit, 6-wire video

VKG-200/BTC Basic kit 6-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.

VKG-200/BEC - Basic kit, 6-wire video

VKG-200/CCS - Basic kit, 6-wire video

- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer

Basic kit Scope of delivery:(without door station or video intercoms)

VKG-200/BEC Basic kit 6-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.

- BEC-200 Built-in camera module- ELA-100 Door electronics- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer


VKG-200/CCS Basic kit 6-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.

- CCS-200 Outdoor camera, stainless steel- ELA-100 Door electronics- BTE-116 Call button expander- BSV-200 Line power supply- NGV-860 Video power unit- NTR-812 Power transformer


Video kits 6-wire system


6-wire video kit with BTC camera

VKG-200/BTC video basic kit COLOUR, 6-wire 100.131.1 2


6-wire video kit with BEC camera

VKG-200/BEC video basic kit COLOUR, 6-wire 100.134.1 2


6-wire video kit with CCS camera

VKG-200/CCS video basic kit COLOUR, 6-wire 100.133.1 2

65

6DVIDEO

2DVIDEO

2DVIDEO

2DVIDEO

Video Video

Sets

and

Kit

s

i2-BUSPower supply i2-BUS

Power supply

BVF-200

BVF-260 BVM-280

BVF-200

BVV-203/6,223

VKG-500/CCS - Basic kit, 2-wire video

VKG-500/CCS Basic kit 2-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.

- CCS-500 Outdoor camera, stainless steel- ELA-100 Door electronics- BTE-116 Call button expander- BAA-520 Audio decoupler- BSV-500 Line power supply- NGV-500 Video power unit- NTR-812 Power transformer


VKG-500/BTC - Basic kit, 2-wire video

VKG-500/BTC Basic kit 2-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.

- BTC-500 Camera door electronics combination- BTE-116 Call button expander- BSV-500 Line power supply- NGV-500 Video power unit- NTR-812 Power transformer


Series wiring Star wiring configuration

Up to 6 units Up to 16 units

Information and prices for the video distributors can be found on page 27.

BVF-500

BVF-500

Series wiring Star wiring configuration

Up to 6 units Up to 16 units

BVV-502/4,522/4

BVF-500

BVF-500BVF-500

i2-BUS 2-wire video i2-BUS 2-wire video

i2-BUS 2-wire video

Information and prices for the video distributors can be found on page 45.

The kits can support a maximum extent of up to 16 units, but in that case for both systems a video star wiring configuration is needed, along with additional video distributors(BVV).

Video kits 2-wire system


2-wire video kit with CCS camera

VKG-500/CCS video basic kit COLOUR, 2-wire 100.153.1 2


2-wire video kit with BTC camera

VKG-500/BTC video basic kit COLOUR, 2-wire 100.151.1 2

67

IP

IP/P

BX S

yste

ms

With the new product portfolio of IP components, ELCOM offers you solutions for the simple integration of the speech system into IP-based networks. We rely fully on established standards making the problem-free connection and operation of SIP-capable com-ponents and software possible.

System technology for networks and telephony

68

Perfect for integration into IP-based networks:

compatible with the established SIP telephony standard

no problem to use in VoIP environments (based on SIP)

no additional controllers/servers needed

use structured CAT network cabling

transmission also possible by VLAN, power line, xDSL, fibre optic

high number of doors and units possible

power via power-over-ethernet or power supply

convenient configuration using web browser

■

■

■

■

■

■

■

■

69

PC

PC

IP/P

BX S

yste

ms

IP-based speech system technology

Connection via IP pbx

This configuration permits a high degree of flexibility with the indivi-

dual SIP telephones, because a pbx (SIP server) handles the coordina-

tion. The SIP telephone is created on the pbx on the SIP component

where the SIP server is located (domain/IP address) as well as account

and login data. During a call, the SIP pbx is contacted and the call is

transmitted to the telephone called. Where that telephone is located is

immaterial - the important thing is that the telephone (or softphone) is

logged into the SIP server and reachable.

This structure permits very high flexibility and seamless integration of

intercom components into the telephony infrastructure. Intelligent per-

formance features of modern IP pbx can thus be used for door commu-

nication.

Point-to-point connection

This type of infrastructure is a point-to-point connection. No other cen-

tral components are needed. Calling takes place directly via the IP

address of the desired call destination. The advantage is cost-effective

construction, since the IP pbx can simply be omitted. The disadvantage

is a relatively rigid structure due to the need to specify and call fixed IP

addresses, as well as more effort required when conditions change.

IP telephony in industrial applications

Since SIP components act as stand-alone telephony equipment, they

offer a variety of application options. Wherever a telephony function

is desired, these devices can be used as robust, easy-to-use communi-

cations units.

For the operator, the flexible configuration, the option of remote main-

tenance and the combination with modern pbx functions make an ide-

al overall package for security and service. Whether in industrial appli-

cations, in public areas or built into machines and automation,

telecommunications over the Internet offer huge potential for the ef-

ficient implementation of a wide variety of requirements.

Application scenarios

ELCOM IP components rely on the open and widely supported SIP stan-

dard defined in RFC-3261. This makes the devices compatible with a

variety of IP telephony systems, IP telephones and software products

from well-known manufacturers. The devices have Ethernet ports and

can be operated by power-over-Ethernet. They are connected directly

through conventional network components, without the use of special

converters, controllers or servers. All the options of modern network

technology can be used.

Future-ready with open standards

Client/server connection with SIP pbx

Ethernet

VoIP telephone(SIP: #101)

VoIP telephone(SIP: #102)

Software client(SIP: #100)

Video in the web browser or using suitable software

Video with suitab-le IP telephone

Ethernet

SIP door station(SIP: #100)

Call button configuration specifying the SIP account of the terminal device

Ethernet switch

IP pbx(SIP registrar)

Peer-to-peer connection without an SIP pbx

Ethernet

VoIP telephone(IP: 192.168.1.12)

VoIP telephone(IP: 192.168.1.13)

Software client(IP: 192.168.1.11)

Video in the web browser or using suitable software

Video with suitab-le IP telephone

Ethernet

SIP door station(IP: 192.168.1.10)

Call button configuration specifying the IP address of the terminal device

Ethernetswitch

SIP components should be seen as stand-alone telephony devices, opening up a variety of possible applications

As telephone with a high degree of robustness

for the industrial sector and public areas

As a manipulation-resistant

telephone unit with authentication

As a call unit with a fixed range of numbers for

automated shops or hotels with no personnel

70

Seamless integration of SIP telephony solutions

The LBM-300 IP-capable door speaker module follows the established

SIP standard defined in RFC3261 and is suitable for integration into IP

or VoIP infrastructures.

The module supports direct client connections via peer-to-peer or

(branch) registration with VoIP-capable pbx or SIP providers. The mo-

dule acts as a conventional SIP client (VoIP telephone) and can therefo-

re be used in a pbx infrastructure without additional hardware or spe-

cial configuration. The performance features of the pbx can therefore

also be used for door communication.

The unit has two Ethernet interfaces for the cascading of multiple door

speech modules or the integration of an IP camera. There are also five

connections for four call buttons and one direct call button, two con-

trol relays for lights and door releases, as well as an expansion connec-

tion for up to five diode matrices with 15 call buttons each, a display

call module or a direct call keypad on board. The call destinations of

the call buttons are defined using the integrated phone book. Power

supply can either be via power-over-Ethernet or using an external DC

power supply. Configuration and phone book administration are easy

and flexible thanks to the installed web server.

The module is designed for installation into the MODESTA system (only

flush-mounted door stations and pedestals).

LBM-300

IP door speaker module


LBM-300

LBM-300IP door speaker moduleDimensions (W x H x D): 120 x 120 x 43 mmPower supply: by PoE or external power supply (NGV-500, see page 45)

Units and functional expansion:with DBM-300 display call module, TBM-300 direct dial keypad module,MBM-300 Diode matrix module

Main features . IP-based door speaker module with two Ethernet ports . Behaves as an SIP client (telephone) as defined in the RFC3261 standard . Four connections for call buttons available, expansion possible . Two integrated control relays, for example for door opening and lights . Administration of units and configuration via web interface . Power via power-over-Ethernet or power supply (NGV-500)

SIP door station

IP pbx

SIP provider

Internet connec-tion (P2P/VPN)

In the buil-ding, user of the pbx

Subsidiary

External units, mobi-le phones

Possible forms of connection/communication


LBM-300

LBM-300 IP door speaker module 581.301.0 2

71

PC

PC

IP/P

BX S

yste

ms

High flexibility with IP network technology

The CBM-300 IP camera is a very compact built-in camera module for

the MODESTA door station system. The device is IP-ready and can be

integrated into an IP infrastructure without the need for additional

components or converters.

The camera provides a motion-JPEG stream with at most (640 x 480

pixels) and 25 images per second. Access can take place through a web

browser. using a Java plugin, video client or suitable IP telephony. The

simultaneous access of multiple clients is possible. The camera has an

automatic SW/colour changes and IR illumination for nighttime use.

The power supply can either be via Power-over-Ethernet or an external

DC power supply. Configuration is carried out using an integrated web

server.

The IP camera module represents the ideal video supplement to the

LBM-300 IP door speaker module. The module is designed for use in the

MODESTA system (only flush-mounted door stations and pedestals).

CBM-300

IP camera module


CBM-300

CBM-300IP camera moduleDimensions (W x H x D): 120 x 120 x 42 mmPower supply: using LBM-300 (page 70) or PoE (Endspan)

Processing the video stream:IP telephones with XML browser (Snom 760/821), web browser with Java plug-in, CBS-300 camera multiviewer and suitable DVR software

Main features . IP-based colour camera module with one Ethernet port . Motion JPFG colour picture with at most 640 x 480 (VGA) . Aperture angle: 83° horizontal, 65° vertical . IR lighting during night operation (automatic detection) . Configuration via integrated web interface . Power supplied by the LBM-300 or Power-over-Ethernet (Endspan)

SIP door station

Motion JPEG HTTP stream

IP telephone with XML browser

Web browserwith Java plug-in

Multiviewer,DVR software

Possibilities of video stream processing





CBM-300

CBM-300 IP camera module 581.337.0 2

72

For the use of the IP system in infrastructures with a high number of units, we offer various expansion modules. For special requirements such as

"code lock access control" or "door station as robust IP station", the TBM-300 direct-dial keypad module is the right choice.

IP expansion modules

TBM-300

MBM-300

IP display call moduleWith the DBM-300 display call module, the LBM-300 IP door speaker module can be extended with a convenient call de-stination selection on the display.+ The display module is connected to the expansion port of the LBM-300 and managed using the phone book built into the LBM-300. The selection and dialling of units is done by keypad operation. Up to four DBM-300 can be cascaded. A total of 60 units are supported; for multiple DBM-300 modules the number of participants is correspondingly larger. A DBM-300 is supplied with power from the LBM-300 door speaker module; additional modules must be connected separately using a 28VDC power supply.

The module is designed for installation into the MODESTA system (only flush-mounted door stations and pedestals).

Dimensions (W x H x D): 120 x 120 x 35 mmPower supply: 1x DBM-300 through LBM-300 (see page 70)additional DBM-300 using external power supply (NGV-500, see page 45)

DBM-300

IP Diode matrix moduleWith the MBM-300 diode matrix module, the LBM-300 IP door speaker module can be expanded with additional call buttons. Up to 5 matrix modules can be cascaded (for a maximum of 75 call buttons). The connection board is built into the door station. The call destination of the call button is defined in the phone book of the LBM-300.

The module is designed in combination with the LBM-300 for installation into the MODESTA system (only flush-mounted door stations and pedestals).

for the connection of 15 call buttonsup to 5 modules can be cascaded (75 call buttons)Dimensions (W x H x D): 95 x 90 x 20 mm

IP direct-dial keypad moduleThe TBM-300 IP direct dial keypad module permits the free input of call destinations, phone numbers, IP addresses and PIN codes in combination with the LBM-300 IP door speaker module. Its use permits a high degree of flexibility and is particularly good for operation with a large number of telephones. The call button connections to the LBM-300 can also be used. An MBM-300 diode matrix module can also be used for the connection of up to 15 additional call buttons in the system. The unit also has a code-lock function that can be used to switch the relays built into the LBM-300 using the input of a PIN. The high-quality buttons are LED-backlit. Power is supplied by an LBM-300.

The module is designed for installation into the MODESTA system (only flush-mounted door stations and pedestals).

Dimensions (W x H x D): 120 x 120 x 35 mmPower supply: by an LBM-300 (see page 70)


DBM-300

DBM-300 IP display call module 581.356.0 2


TBM-300

TBM-300 IP direct-dial keypad module 581.360.0 2


MBM-300

MBM-300 IP Diode matrix module 581.310.0 2

73

PC

IP/P

BX S

yste

ms

Ideal in combination with IP/SIP hardware telephones

The ELCOM MultiViewer software is a computer program for MS-Win-

dows-compatible operating systems for the convenient control and vi-

deo stream display of the CBM-300 IP camera module in combination

with the LBM-300 IP door speaker module.

A nearly unlimited number of cameras are supported, and additional

display modes, the actuation of the control relay integrated into the

modules, the storage of images and videos as well as acoustic signa-

ling.

The software is outstandingly well suited for operation in combination

with IP hardware telephones or SIP software clients. Custom configu-

ration to required conditions and convenient operation makes the soft-

ware a flexible, valuable tool for professional use. In particular large

installations with many different entry doors can be outstandingly mo-

nitored and managed.

CBS-300

IP MultiViewer software


CBS-300 / CBL-300

CBS-300IP multiviewer software (for CBM/LBM)Software client for the display of CBS-300 camera interfaceOperating systems: Microsoft Windows XP, Vista, 7 (32 and 64bit)PC hardware (minimum): 2GHz, 1GB RAM, network interface (hardware performance needed depends on the number of streams received)

Main features . Software client for the display of CBM-300 camera streams . Automatic video image popup in combination with LBM-300 . Arbitrary number of cameras, depending on system performance . Display of all camera streams or individual stream of the calling door . Convenient button control of the relays in the speaker module . Suitable for MS-Windows-compatible operating systems

MultiViewer license model:

The CBS-300 software can be installed on any number of PC worksta-

tions. The number of cameras in use must be licensed. With the CBS-

300 base client, one CBM-300 can be operated; additional cameras

are each used by an additional CBL-300 license.

CBL-300Multiviewer camera license, for each additional camera

SIP door stations

IP network/pbx

Multiviewer software

Audio/Video communication with IP standard technology

IP/SIP telephone

SIP telephony through pbx and separate video streams

Arbitrary number of entry doors


CBS-300 / CBL-300

CBS-300 IP multiviewer software for CBM/LBM 151.301.0 2CBL-300 Multiviewer camera license 151.302.0 2

74

i2AUDIO

PBX interface

i2-BUS


InterfaceExternalAnalogue a/b


Control functions . Actuate door release, turn on light . Switch cameras, disconnect call . Dialling of door stations and intercoms

Connection to PBX

The BTI-200 telecommunications interface permits the i2 bus speech

system to be connected to the a/b port of a pbx. This makes the speech

system a telephony unit so it can be used as part of a telephone system

installation.

The device is designed for up to 256 units. There are two numbers

available for each unit. These can be switched from the speech menu

or defined as a chain call (if busy or not answered). Door and storey

calls are supported (with the BER-140 or a parallel intercom) as well as

internal calls to normal intercoms. DTMF dialling can control door

strikes, light relays, and up to four BSR-140 control relays. During a call,

up to eight defined door stations can be dialled and those doors ope-

ned. For operation in combination with touch panel PCs, moreover,

camera switching is provided.

For identification of the door call, up to eight individual voice messages

are supported. The unit can be secured against unauthorised access

using a PIN input. Programming is carried out using the integrated dis-

play and the keypad on the unit, or even more conveniently using PC

software and a USB connector. The unit does not need a separate po-

wer supply and is supplied with power through the i2 bus.

BTI-200

BTI-200

BTI-200i2-bus PBX interfaceDimensions (W x H x D): 93 x 96 x 59 mm, top-hat rail mounting (6TE)Power supply: through i2 bus

PBX interface: Analogue a/bMFV dialling procedure (DTMF), at most 256 units with two numbers each


BTI-200

BTI-200 PBX interface 190.142.0 2

75

6DVIDEO IP

/PBX

Sys

tem

s

Intranet technology

i2 bus video transmission over the existing computer network.

The BPI-200 i2 bus interface and the BVS-200 video server allow the

connection of up to 6 PC workstations to the ELCOM i2 bus video

phone system.

The BPI-200 interface converts i2 bus signals into standard data, video

and audio signals. The standard signals are processed by the video

server and transmitted over the network. The software "BVS Viewer"

is installed on the PC workstation for communication with the video

server.

After configuration, the PC workstation fulfils the function of a video

telephone. After a ring, the PC software handles the automatic display

of the video image, also offering the option of switching between dif-

ferent cameras, storing the current video frame, actuating the door

opener or turning on the light. Voice can also be transmitted through

a PC headset.

The system's flexibility makes it possible to combine different func-

tions. For example, the integration of the telecommunications interface

permits the telephone system to both carry out voice transmission and

the door opening function. Similarly, conventional intercoms in other

parts of the building or video intercoms can also be used for conven-

tional door communication.

Video communication on the Intranet

BVS-200, BPI-200

BVS-200 BPI-200

BVS-200Video server Video server with RISC processor, 1 channel video trans-mission, bidirectional audio transmission, BNC video loop-through input, audio input and output jacks, RS-232 interface.Digital inputs and outputs, network connection (10/100 Mbit), integrated Web server, high-quality video resolution of up to 768x576 at 25 frames/second. Video quality, video resolution and network bandwidth configurable. Power supply using attached wall power supply.

Dimensions (W x H x D): 140 x 140 x 40 mm

BPI-200Video server interface i2 bus interface for the connection of the bus video server (BVS-200). Up to 6 call targets addressable, 4 signal outputs for call signalling, video output using cinch jack, audio output jack, audio input jack. RS-232 interface galvanically isolated, status display with LEDs. Delivery contents: "BVS Viewer" software and Data, video and audio cables. Housing for wall mounting.



For cameras, see pages 22/23

i2-BUS

BPI-200Interface

NetworkTCP/IP Intranet

BVS-200Video serverEthernet Audio,

data, video

PC PC

Distribution board

Door release

Door release


BVS-200 and BPI-200

BVS-200 Video server 190.312.0 2BPI-200 Video server interface (6-wire video) 190.304.0 2

77

Acc

ess

cont

rol

Convenient and modern, thanks to keyless access control. For single- and multi-family houses, ELCOM provides keypass and code lock systems for security that protects easily and comfort-ably. As a standalone system, or integrated into ELCOM door stations.

Components and systems

78

RFID access control

Keypass needs no connection to a PC or control unit. RFID transpond-

ers in (credit) card format or as key chains are used as passes (keys).

A keypass reader can manage up to 200 passes. The built-in 2-digit LED

display shows the storage cell number of the pass. Passes can be read

or deleted using the master passcard included. Display of the storage

cell number makes selective deletion of individual passes possible.

In addition to the master passcard provided, another pass can be con-

figured as a second master passcard. While the original master pass-

card is assigned permanently to a single keypass reader, the second

master passcard can be assigned to different units simultaneously. This

makes it possible to manage multiple keypass readers conveniently

with a single second master passcard.

Keypass

KAE-200Complete unit* for wall mountingFront plate of 2 mm stainless steel, matte, sur-rounding aluminium frame, painted in DB703, special security screws, surround-ing gasket.


KPAKeypass keychainContact-free pass as a keychain.Packaging unit: 3 / 10 units


KPCKeypass cardContact-free pass in credit card format.Packaging unit: 3 / 10 units


KUE-200Complete unit* for flush mountingFront plate of 2 mm stain-less steel, matte, special security screws, surround-ing gasket.

Dimensions of front plate (W x H): 120 x 190 mm

Including UP box, Dimensions (W x H x D): 100 x 170 x 55 mm

KPR-200keypass built-in unit* - Interchangeable

potential-free contact (24V/1A)For controlling a door opener.

- Relay delay time adjust-able (0.5 or 9 seconds)

- Storage space for up to 200 passes

- 2-digit LED display- Including viewport for

80x80 mm opening- 12-24VDC/12-15VAC

200mA power supply- Dimensions (W x H x D):

85 x 105 x 29 mm

Keypass

* NTR-812 power transformer (order no. 120.100.4) not included. (see page 25)


Keypass devices

KAE-200 Wall-mounted 100.641.1 2KUE-200 Flush-mounted 100.621.1 2KPR-200 Built-in unit 150.620.0 2

Keypass keychain

KPA-003 3 units 150.622.3 2KPA-010 10 units 150.622.1 2

Keypass card

KPC-003 3 units 150.621.3 2KPC-010 10 units 150.621.1 2

79

Acc

ess

cont

rol

Numerical access control

The code lock has two independent relay contacts (24V/1A) which are

controlled by individual codes (1 to 8 digits).

The switching duration of contacts can be set between 1 and 99 sec-

onds. Alternatively, a toggle mode can be configured that turns the

contact on when first activated, then off again when it is activated

again.

If an incorrect code is entered, the code lock blocks for 60 seconds

after the fifth incorrect input and signals this with an alarm tone. Any

additional incorrect entry will trigger the block and alarm tone for

60 seconds again.

All settings for the code lock are changed using the call button, and

protected from unauthorised manipulation by the master code.

Code-Lock

CAE-200Complete unit*for wall mountingFront plate of 2 mm stainless steel, matte, sur-rounding aluminium frame, painted in DB703, special security screws, surround-ing gasket.


CUE-200Complete unit* for flush mountingFront plate of 2 mm stain-less steel, matte, surround-ing gasket.

Dimensions of front plate (W x H): 120 x 190 mm

Including UP boxes Dimensions (W x H x D): 100 x 170 x 55 mm

CLE-200Code-lock built-in unit*With stainless steel call button for installation in door stations or letter box systems.

Power supply: 15VDC or 12VAC / max. 70mA (NTR-812* recommended)


Code-Lock



Keypass

CAE-200 Wall-mounted 100.241.1 2CUE-200 Flush-mounted 100.221.1 2CLE-200 Built-in unit 150.600.4 2

80

Fingerprint

Fingerprint access control uses the unique features of the fingerprint

for authentication, thus providing an alternative to keys, chip cards or

access codes. As a "standalone" access controller with a storage ca-

pacity of up to 99 fingers/users, the system is suitable for single- or

multi-family buildings or for companies.

The fingerprint access control consists of an indoor unit for controlling,

recording and deleting of users and a scanner unit to read fingerprints.

The connection between scanner unit and indoor unit uses four wires.

The system is supplied with power through an NTR-812 power trans-

former.

The interior is now implemented as a compact tophat rail installation

device and is equipped with two potential-free switching outputs. The

switching duration of contacts can be set between 1 and 99 seconds.

Alternatively, a toggle mode can also be configured that turns the con-

tact on when first activated, then off when it is activated again. The

last 50 accesses are recorded.

Biometric access control

FPM-200Fingerprint MODESTA moduleFor installation in MODESTA flush-mount door stations and pedestals (see page 90 - 93).

FPE-200Built-in fingerprint unitBuilt-in unit for door stations and letter box systems with special fabrication (on request, after discussion).

Technical dataStorage capacity: Up to 99 finger data setsSwitching outputs: 2 changer contact, max. 24V/2A

Toggle mode or adjustable dura-tion of 1 to 99 seconds.

Power supply: 8-24V AC/DC (Recom.: NTR-812*)

Dim.of scanner unit: 120 x 120 x 50 mm (W x H x D)Dim. of indoor unit: 70 x 105 x 54 mm (W x H x D) (4 Top-hat rail units)

Fingerprint

Control unitThe simple menu structure uses four control keys and the lighted LCD display to guarantee simple, convenient pro-gramming by the electrical installer and the house owner.


NEW - optimized scanner unitThe new sensor in the finger scanner optimises the de-tection of the fingerprint. The RF line sensor doesn't just read at the surface of the skin, but rather sends a weak RF signal to the skin, which is reflected and measured by a living layer of skin. The lifecycle of the sensor was more than doubled and manages over 10 million uses. Outdoor use capability and ESD resistance are both significantly in-creased by a now-special hardened surface (resistance to alcohol, water, oil and cleaning agents).

FPE-200 built-in example, door station not included.


Fingerprint module

FPM-200 Fingerprint module for MODESTA 581.092.0 2FPE-200 Fingerprint kit Built-in unit 150.632.0 2

81


Acc

ess

cont

rol

83

M

MO

DES

TA

The MODESTA series is predestined for urban spaces, where requirements couldn't have a wider variety. The modular structure of the door station can express its advantages optimally here, offering long service life due to its robust metal construction.

Modular stainless steel door stations and pedestals

84

MODESTA presentation

Modular variety - elegant design.

MODESTA pillars and door stations stand for an overall aesthetic con-

cept on pathways, facades or outdoor areas. An elegant system with-

out visible screws, grooves or cladding. Stainless steel, matte brushed,

radiates clarity and value. For the elegant accent, these stainless steel

modules can be combined with a frame in glossy anthracite.

With our custom manufacturing offer, there are almost no limits to

your design ideas. Depending on the architectural style, the elements

of the entry area can be ideally adapted to one another.

Modular construction - maximum freedom of choice.

The modular construction concept provides maximum freedom in the

choice of applications and allows different requirements to be com-

bined as easily as possible.

Select from high-quality technical modules like cameras, digital calling,

different types of access control, speakers and different design elements.

Our partner companies offer integration of additional access control sys-

tems in MODESTA modules. This permits integration into existing com-

munications infrastructures, authentication and time entry solutions.

85

MO

DES

TA

MODESTA presentation

The latest in technology and manufacture.

Many years of experience in metalworking, precise series production, the combination

of traditional processing and the most modern process technologies make it

possible for us to offer a wide variety of adaptations and refinements.

Workpieces are processed either in series or individually,

and in special cases finished by hand.

Utilise our Modesta configurator at: www.elcom.de/modesta

for a compilation of your desires.

86

The call buttons of our own manufacture with their high-quality

matte brushed stainless steel finish offer a long life of reliable functionality.

Modules

Serial CZM

CZM1 - 4 stainless steel buttons with LED-illuminated, flush- mounted name plates. Name plate replacement from the front. Writing area (W x H): 50 x 12 mm, for the CZM-210: 80 x 50 mm, name plate replacement from behind

120 130 140 210

110

GZM1 - 4 stainless steel but-tons with flush-mounted engraved plates with hid-den screws. Writing area (W x H): 60 x 15 mm, for the GZM-210: 80 x 50 mm

Serial GZM

120 130 140 210

110

SZM1 - 4 stainless steel but-tons with LED-illuminated, flush-mounted name plates. Name plates can be repla-ced from the front. Writing area (W x H): 60 x 12 mm

Serial SZM

120 130 140

110


Serial CZM

CZM-110 1 Call button, LED-illumin. matte 581.012.1 2CZM-120 2 Call buttons, LED-illumin. matte 581.012.2 2CZM-130 3 Call buttons, LED-illumin. matte 581.012.3 2CZM-140 4 Call buttons, LED-illumin. matte 581.012.4 2CZM-210 1 Call button, LED-illumin. matte 581.012.5 2


Serial GPM

GZM-110 1 Call button, engraved matte 581.017.1 2GZM-120 2 Call buttons, engraved matte 581.017.2 2GZM-130 3 Call buttons, engraved matte 581.017.3 2GZM-140 4 Call buttons, engraved matte 581.017.4 2GZM-210 1 Call button, engraved matte 581.017.5 2


Serial SZM

SZM-110 1 Call button, LED-illumin. matte 581.013.1 2SZM-120 2 Call buttons, LED-illumin. matte 581.013.2 2SZM-130 3 Call buttons, LED-illumin. matte 581.013.3 2SZM-140 4 Call buttons, LED-illumin. matte 581.013.4 2

87

MO

DES

TA

Door speaker

for i2 bus systems, complete with ELA-100

Modules

Door speaker

LTM LQM LOM LKM

KPM-900Card reader dummy module for installation of third-party card readers after provision and inspection for technical feasibility.

Access modules

FPM-200Fingerprint, access control consisting of indoor unit and stainless steel scanner unit. Storage capacity for 99 finger data sets/users. 2 potential-free switching outputs. Only for UP mount-ing and installation in ped-estals. Technical data: see page 80 (FPM-200)

CLM-200Code lock with 2 independent switching contacts, switching time adjustable from 1 to 99 seconds. Technical data: see page 79 (CLE-200)

KPM-200Keypass, contact-free ac-cess control for up to 200 keys. LED storage space display, deletion of individual keys possible, includ. master passcard.Technical data: see page 78 (KPR-200)

KSM-100Keyed button including lock cylinder and two button contacts.

DLM-25612-key stainless steel call button for connection to the DCM-256 display call module. In combination with the DCM-256, direct resident call by entry of telephone number, in addition to code lock func-tions with 2 independent switching contacts. Please refer to page 32 for more information.

DCM-256Call display for up to 256 resident entries with addi-tional information. Simple operation with 3 function keys (up/down/call) with dynamic searching speed. Illuminated LCD display (128 x 64 pixels / 63 x 44 mm). Only available for i2 bus system. Please refer to page 32 for more information.

Module dimensions a uniform 120 x 120 mm

LRM

Speaker modules with modern, fully-equipped door electronics in i2 bus technology.

Here, you can choose from five different speaker grating designs.


Access modules

KPM-200 Keypass card reader matte 581.070.0 2KPM-900 Card reader dummy matte 581.079.0 2KSM-100 Keyed button matte 581.080.0 2FPM-200 Fingerprint module matte 581.092.0 2CLM-200 Code lock matte 581.060.0 2DCM-256 Display call module matte 581.256.0 2DLM-256 12-Call button module matte 581.257.0 2


For i2 bus systems

LRM-110 i2 bus door speaker matte 581.201.0 2LTM-110 i2 bus door speaker matte 581.202.0 2LQM-110 i2 bus door speaker matte 581.204.0 2LOM-110 i2 bus door speaker matte 581.205.0 2LKM-110 i2 bus door speaker matte 581.206.0 2

88

2DVIDEO

6DVIDEO

6DVIDEO

Camera modules

Modules

LIM-100Info module, white LED illumination, viewing surface: 80 x 80 mm

LLM-105Light module for effective illumination of engraved text, etc., LED (white), can be connected directly to operating voltage (12V AC/DC).

BMM-200IR movement detector including dimmer switch, detection range up to about 8 m, trigger bright-ness and switching delay adjustable (1 sec to 3 min).

ECM-200Colour camera for i2 bus 6-wire video system.Camera mechanically adjustable: +/- 47°, Open-ing angle: 80º horizontal, 60º vertical

Technical data: Page 22

TCM-200Colour camera with door speaker for i2 bus 6-wire video system, camera mechanically adjustable: +/- 47º horizontal/vertical, opening angle: 80º horizon-tal, 60º vertical


STM-100Special call button module, illuminated stainless steel buttons

AMM-100Module for covering empty spaces or as space holder for future extensions.

Module dimensions a uniform 120 x 120 mm

TCM-500Colour camera with door speakers for i2 bus 2-wire video system.Other technical data equiva-lent to the TCM-200.


Function modules

HNM-110House number module with one digit, in robust pluggable design

HNM-120House number module with two digits, in robust pluggable design

Upon request, individual laser engraving on the cover module is available.

Function modules are available in a wide variety of designs. House numbers, signs,

lighting and motion detection modules, in standard designs or as custom modules.

TCM-200 / 500

HDM-100Switchbox module with 68mm standard box for the installation of switches or outlets


Camera modules TCM

TCM-200 i2 bus camera/door speaker matte 581.235.0 2TCM-500 i2 bus camera/door speaker matte 581.234.0 2

Camera modules ECM

ECM-200 i2 bus colour camera matte 581.232.0 2


Function modules

BMM-200 movement detector matte 581.052.0 2LLM-115 Light module, LED-illuminated matte 581.595.0 2HNM-110 House number module, one digit matte 581.025.1 2HNM-120 House number module, two dig. matte 581.025.2 2LIM-100 Info module, LED-illuminated matte 581.024.0 2STM-100 Special call button module matte 581.011.1 2AMM-100 Cover module matte 581.040.0 2HDM-100 Recess box module matte 581.030.0 2

89

MO

DES

TA

Surface area light, special designs

FLM-112

LED area lighting for SMT, SMB und SMF pedestals

FLM-111LED area lights in stainless steel housingLED colour: whitePower supply: with SGR-210


Custom designs

Modified framesare the solution when you need to adapt to structural conditions like wall niches and door frames. An extension for additional engraved areas can be implemented in the same way.

Embossed elementsare a sophisticated form of layout and are implemented by us using high-precision penetra-tion technology. A metal brushing direction rotated by 90° underscores the outstanding effect.

Colour coordinationprovides impressive refinement for mechanical engraving. Multi-coloured company logos, informa-tional and guiding system elements can be put in the scene in a first-class manner.

Mechanical engravingis added using precision CNC-controlled machines, lending the stainless steel object a very massive el-emental, yet still restrained overall impression due to their depth.

The MODESTA program offers you the freedom of design you need to make your entry area a representative business card.

Allow yourself to be inspired by the variety of variations and options, and contact us for a consulting session.





Engraving service

Laser engraving in Arial font. Other fonts and processes available for an additional price.

Use the ELCOM laser engraving service for a customised entryway design. All MS Windows®-compatible fonts may be used. Colour-background logo engraving based on DXF files is possible. Do you have an idea? We'd be happy to talk to you and prepare a personal offer.

One SGR-210 voltage rectifier (see page 127) is included in the scope of delivery (power supply: 12V / AC).


Area lights

FLM-111 Area lights LED, 195 mm matte 581.595.1 2FLM-112 Area lights LED, 325 mm matte 581.595.2 2FLM-113 Area lights LED, 460 mm matte 581.595.3 2


Engraving service

GZM engraving 1-row 880.020.5 2GZM engraving 2-row 880.020.6 2LIM engraving per character á 60mm 880.020.3 2AMM engraving per character á 60mm 880.020.4 2

90

Serial SMT

Pedestals in stainless steel, matte brushed

Pedestals

SMT-1/1EM SMT-2/1EM SMT-3/1EM SMT-4/2EM SMT-6/2EM

All MODESTA modules can be flush mounted. They are not included in the scope of delivery.Foot plate of 10 mm stainless steel, including fastening materials. Review flap on back side.

Clear design, optimum orientation towards visitors, flexible positioning and very harmonious integration as a stylish element for modern archi-

tectural objects – all these are characteristic of high-quality communication and functional columns. Due to their flexible modular construction,

there is a wide variety of areas of use permitting almost any requirements to be satisfied.

Stainless steel, matte brushed

SMT-4/1EM

Designation Variant Dimensions (W x H x D) Foot plate (W x D) Item no. DG

1-row modules

SMT-1/1EM Pedestals 1-row, 1-module 195 x 1370 x 84 mm 345 x 150 mm 482.118.0 2SMT-2/1EM Pedestals 1-row, 2-modules 195 x 1500 x 84 mm 345 x 150 mm 482.218.0 2SMT-3/1EM Pedestals 1-row, 3-modules 195 x 1630 x 84 mm 345 x 150 mm 482.318.0 2SMT-4/1EM Pedestals 1-row, 4-modules 195 x 1630 x 84 mm 345 x 150 mm 482.418.0 2

2-row modules

SMT-4/2EM Pedestals 2-row, 4-modules 325 x 1500 x 84 mm 475 x 150 mm 482.428.0 2SMT-6/2EM Pedestals 2-row, 6-modules 325 x 1630 x 84 mm 475 x 150 mm 482.628.0 2SMT-x/xEM individual pedestals according to requirements according to requirements according to requirements 482.998.0 2

91

MO

DES

TA

Pedestals

Serial SMB and SMF

Letter box pedestals in stainless steel, matte brushed

SMB-4/2EM SMB-6/2EM

All MODESTA modules can be flush mounted. They are not included in the scope of delivery.Review flap on back side in the SMB variant, front side review flap in the SMF variant.Foot plate of 10 mm stainless steel, including fastening materials.

SMF-4/2EM SMF-6/2EM

Letter box communications columns are the key to the entry area of business buildings and upscale private residences. The column receives your

mail, regulates building communication and access control, serves as an information medium and also meets refined expectations for representa-

tion. Innovative features leave no desire for operating convenience and ergonomics unfulfilled.


Designation Variant Dimensions (W x H x D) Foot plate (W x D) Item no. DG

Letter box, back

SMB-4/2EM Letter box pedestals Letter box, back 460 x 1630 x 154 mm 650 x 220 mm 492.428.0 2SMB-6/2EM Letter box pedestals Letter box, back 460 x 1630 x 154 mm 650 x 220 mm 492.628.0 2SMB-x/xEM BK individual pedestals Letter box, back according to requirements according to requirements 492.998.0 2

Letter box, front

SMF-4/2EM Letter box pedestals Letter box, front 460 x 1630 x 154 mm 650 x 220 mm 493.428.0 2SMF-6/2EM Letter box pedestals Letter box, front 460 x 1630 x 154 mm 650 x 220 mm 493.628.0 2SMF-x/xEM BK individual pedestals Letter box, front according to requirements according to requirements 493.998.0 2

92

Wall-mounted frames

Wall-mounted frames

FMA-3/1 EMFMA-1/1 EM FMA-4/1 EMFMA-2/1 EM

FMA-4/2 EM FMA-6/2 EM FMA-9/3 EM

The MODESTA frame system, with its resilience and variability,

represents one of the most flexible door station systems on the market.


MODESTA configurator at: www.elcom.de/modestaDesign your Modesta variant online.

Closed stainless steel profile system with matte design, for support of all MODESTA modules. This also allows subsequent changes to the design of the entry area without problems.

Designation Stain. steel Dim. (W x H x D) Item no. DG

Wall-mounted frames

FMA-1/1EM Wall-mounted frame matte 175 x 200 x 48 mm 402.118.1 2FMA-2/1EM Wall-mounted frame matte 175 x 330 x 48 mm 402.218.1 2FMA-3/1EM Wall-mounted frame matte 175 x 460 x 48 mm 402.318.1 2FMA-4/1EM Wall-mounted frame matte 175 x 600 x 48 mm 402.418.1 2FMA-4/2EM Wall-mounted frame matte 305 x 330 x 48 mm 402.428.1 2FMA-6/2EM Wall-mounted frame matte 305 x 460 x 48 mm 402.628.1 2FMA-9/3EM Wall-mounted frame matte 425 x 460 x 48 mm 402.938.1 2

93

MO

DES

TA

Flush-mounted frames

Flush-mounted frames

FMU-3/1 EMFMU-1/1 EM

FMU-4/2 EM FMU-6/2 EM FMU-9/3 EM

FMU-4/1 EMFMU-2/1 EM

Stainless steel, matte brushed PVD anthracite, polished

The consistent finishing in high-quality stainless steel, combined with its variable modular construction, is absolutely without

compromise and, especially for representative showcase properties in the city centre, meets the highest standards of quality.

* = flush-mounted box, included in scope of delivery

With seven standard sizes, the frame system has the right solution for most cases. Elegant accents can be added with frame finishes in PVD anthracite.

Designation Dimension (W x H) UPK* (W x H x D) Stainless steel PVD anthracite DG

Flush-mounted frames EM AP

FMU-1/1 Flush-mounted frame 155 x 180 mm 135 x 155 x 55 mm 401.118.1 401.115.1 2FMU-2/1 Flush-mounted frame 155 x 310 mm 135 x 285 x 55 mm 401.218.1 401.215.1 2FMU-3/1 Flush-mounted frame 155 x 440 mm 135 x 415 x 55 mm 401.318.1 401.315.1 2FMU-4/1 Flush-mounted frame 155 x 580 mm 135 x 555 x 55 mm 401.418.1 401.415.1 2FMU-4/2 Flush-mounted frame 285 x 310 mm 265 x 285 x 55 mm 401.428.1 401.425.1 2FMU-6/2 Flush-mounted frame 285 x 440 mm 265 x 415 x 55 mm 401.628.1 401.625.1 2FMU-9/3 Flush-mounted frame 415 x 440 mm 395 x 415 x 55 mm 401.938.1 401.935.1 2

95

W

WIN

X

The WINX program provides a very attractive product range for entrance hall design in upscale business and living environments. The matte brus-hed stainless steel superbly blends into the modern entrance area with a high-grade and understated impression. The invisible fastening mecha-nisms ensure seamless integration into the property.

Stainless steel door stations without visible fasteners

96

WINX presentation

WINX - the leaf door station

Stainless steel - a material that ELCOM has used for many years and is

perennially popular for its outstanding properties. Flexible processes

using high-precision laser cutting technology gives us many options for

using this material in innovative ways; in the new WINX door station

series, it has taken on a concrete form.

The namesake for this series is the convenient mounting mechanism by

means of which the front plate can simply be folded upwards like a

wing. The invisible fastening and beveled profile allow the piece to

float on the wall - WINX flat.

No visible fasteners

The entry design takes on a special significance in architectural planning,

because here is where the functions of both communication and securi-

ty, as well as stability, long life, and an attractive appearance, play a great

role.

These requirements are particularly well addressed by our new WINX

door station series. Not only is the front plate fastened with no visible

screws, but the series is also outstanding for its refined design and func-

tional details, leading to a product you'll be enthusiastic about.

97

WIN

X

WINX presentation

Refined housing mechanism

The new WINX door stations are equipped with a refined housing mechanism. The front plate

is secured on its top edge by a spring ratchet mechanism and can be swung open with a simple

use of a special tool. It is fastened by a hinge on the lower edge. The opening mechanism is

hidden, entirely invisible to the observer, behind a metal plate on the front side. The WINX se-

ries, with its stable stainless steel frame, offers a very long lifetime, outstanding manipulation

reliability, and convenient installation.

The highest quality for sophisticated properties.

Harmoniously cast.

98

ELCOM.

WINX – no visible fastening

The WINX line for sophisticated commercial

and residential properties is a very high-quali-

ty product line for aesthetic entryway design.

The matte brushed stainless steel front su-

perbly blends into the modern entrance area

with a high-grade and understated impres-

sion. The invisible fastening mechanisms en-

sure seamless integration into the property.

The modern ZENTRA button gives the WINX

stainless steel range a contemporary look. The

flush-mounted button structure with stainless

steel button perfectly fits the door panels.

Basic stainless steel version data: . 2mm thick matte brushed stainless steel

front plate . fastening of front plate not visible . Modern, attractive ZENTRA keypad . Video preparation free of charge

Door speakers or cameras are not included in

the scope of delivery.

Separate EPK flush-mounted box

To protect the housing mechanisms from contamination and

damage during installation, WINX door stations are deliv-

ered with a separate flush-mounted box. Small inaccuracies

in installation in masonry can thus be compensated for.

The leaf door station

BTC video preparation item no. 020.000.2

Technical data on the cameras can be found on pages 23 and 43.

Standard WINX door stations offered with audio preparation for ELA door speakers. Preparation for BTC video cameras is avail-

able free of charge (assuming no change in dimensions). When ordering, please specify the corresponding item number for the

video preparation. Please note our cost-effective audio/video kits on pages 62 - 65.

BTC

99

WIN

X

Stainless steel front plate 2 mm, matte brushed, front plate with no

visible fasteners, flush-mounted box 55 mm in installed depth, with

new ZENTRA keypad:

. Push button of matte stainless steel . Flush-mounted name plate . High-quality microswitch . Built-in white LED illumination (12VAC) . Homogeneous area lighting . Name plates can be replaced from

the front with a special key

Stainless steel, matte

Flush-mounted door stations

Serial TVO

TVO-10/2

TVO-15/3

* = EPK built-in box included.

With premounted ELA speaker bracket for quick installation of the door

speaker without tools. ELA door speaker not included.

TVO-4/1

Designation Buttons Front (W x H) EPK* (W x H x D) Item no. DG

1-row call button

TVO- 1/1 UP door station 1 150 x 255 mm 135 x 240 x 55 mm 500.118.0 2TVO- 2/1 UP door station 2 150 x 255 mm 135 x 240 x 55 mm 500.218.0 2TVO- 3/1 UP door station 3 150 x 315 mm 135 x 300 x 55 mm 500.318.0 2TVO- 4/1 UP door station 4 150 x 315 mm 135 x 300 x 55 mm 500.418.0 2TVO- 5/1 UP door station 5 150 x 375 mm 135 x 360 x 55 mm 500.518.0 2TVO- 6/1 UP door station 6 150 x 375 mm 135 x 360 x 55 mm 500.618.0 2TVO- 7/1 UP door station 7 150 x 435 mm 135 x 420 x 55 mm 500.718.0 2TVO- 8/1 UP door station 8 150 x 435 mm 135 x 420 x 55 mm 500.818.0 2TVO- 9/1 UP door station 9 150 x 495 mm 135 x 480 x 55 mm 500.918.0 2TVO-10/1 UP door station 10 150 x 495 mm 135 x 480 x 55 mm 501.018.0 2TVO-11/1 UP door station 11 150 x 555 mm 135 x 540 x 55 mm 501.118.0 2TVO-12/1 UP door station 12 150 x 555 mm 135 x 540 x 55 mm 501.218.0 2

2-row call buttons

TVO- 4/2 UP door station 4 230 x 265 mm 215 x 250 x 55 mm 500.418.1 2TVO- 6/2 UP door station 6 230 x 265 mm 215 x 250 x 55 mm 500.618.1 2TVO- 8/2 UP door station 8 230 x 325 mm 215 x 310 x 55 mm 500.818.1 2TVO-10/2 UP door station 10 230 x 325 mm 215 x 310 x 55 mm 501.018.1 2TVO-12/2 UP door station 12 230 x 385 mm 215 x 370 x 55 mm 501.218.1 2TVO-14/2 UP door station 14 230 x 385 mm 215 x 370 x 55 mm 501.418.1 2TVO-16/2 UP door station 16 230 x 445 mm 215 x 430 x 55 mm 501.618.1 2TVO-18/2 UP door station 18 230 x 445 mm 215 x 430 x 55 mm 501.818.1 2

3-row call buttons

TVO- 9/3 UP door station 9 335 x 295 mm 320 x 280 x 55 mm 500.918.2 2TVO-12/3 UP door station 12 335 x 295 mm 320 x 280 x 55 mm 501.218.2 2TVO-15/3 UP door station 15 335 x 355 mm 320 x 340 x 55 mm 501.518.2 2TVO-18/3 UP door station 18 335 x 355 mm 320 x 340 x 55 mm 501.818.2 2

101

E

ESTA

More options for the entry area: Open up new layout free-dom with design and cost-effectiveness, with individuality and functionality.

Stainless steel door stations and letter box systems

102

ELCOM.

ELCOM.

The ESTA Zentra program

The ESTA program provides a very attractive

product range for entrance hall design in up-

scale business and living environments. The

matte brushed stainless steel superbly blends

into the modern entrance area with a high-

grade and understated impression. The brass-

coloured PVD coated Kontur-versions lend

themselves for classical buildings (page 107).

With our ZENTRA button, we have given the

ESTA stainless steel range a contemporary

look. The flush-mounted button structure with

stainless steel button perfectly fits the door

panels.

Basic stainless steel version data: . 2mm thick matte brushed stainless steel

front plate . Modern and attractive ZENTRA button . All special stainless steel security screws . Video preparation free of charge

Elegant and valuable

BTC video preparation item no. 020.000.2BEC video preparation item no. 020.000.1

Technical data on the cameras can be found on pages 22 - 23 and 43.

Standard ESTA door stations offered with audio preparation for ELA door speakers. Preparation for BTC or BEC video cameras is

available free of charge (assuming change in dimensions). When ordering, please specify the corresponding item number for

the video preparation. Please note our cost-effective audio/video kits on pages 62 - 65.

BTC / BEC

103

ESTA

Stainless steel front plate 2 mm, matte brushed, special safety screws,

flush-mounted box 55 mm in installed depth, with ZENTRA call button:





Serial TVM

TVM-10/2

TVM-18/3

* = UPK flush-mounted box included.



TVM-4/1

Designation Buttons Front (W x H) UPK* (W x H x D) Item no. DG

1-row call button

TVM- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 510.118.0 2TVM- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 510.218.0 2TVM- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 510.318.0 2TVM- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 510.418.0 2TVM- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 510.518.0 2TVM- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 510.618.0 2TVM- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 510.718.0 2TVM- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 510.818.0 2TVM- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 510.918.0 2TVM-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 511.018.0 2TVM-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 511.118.0 2TVM-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 511.218.0 2

2-row call buttons

TVM- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 510.418.1 2TVM- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 510.618.1 2TVM- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 510.818.1 2TVM-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 511.018.1 2TVM-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 511.218.1 2TVM-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 511.418.1 2TVM-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 511.618.1 2TVM-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 511.818.1 2

3-row call buttons

TVM- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 510.918.2 2TVM-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 511.218.2 2TVM-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 511.518.2 2TVM-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 511.818.2 2

104

Doorbell panels

KVM doorbell panels


Stainless steel front plate 2 mm, matte brushed, special safety screws,

flush-mounted box 55 mm in installed depth, with ZENTRA call button:




KVM-10/2

KVM-4/1


1-row call button

KVM- 1/1 UP doorbell panel 1 150 x 135 mm 130 x 115 x 55 mm 520.128.0 2KVM- 2/1 UP doorbell panel 2 150 x 135 mm 130 x 115 x 55 mm 520.228.0 2KVM- 3/1 UP doorbell panel 3 150 x 195 mm 130 x 175 x 55 mm 520.328.0 2KVM- 4/1 UP doorbell panel 4 150 x 195 mm 130 x 175 x 55 mm 520.428.0 2KVM- 5/1 UP doorbell panel 5 150 x 255 mm 130 x 235 x 55 mm 520.528.0 2KVM- 6/1 UP doorbell panel 6 150 x 255 mm 130 x 235 x 55 mm 520.628.0 2KVM- 7/1 UP doorbell panel 7 150 x 315 mm 130 x 295 x 55 mm 520.728.0 2KVM- 8/1 UP doorbell panel 8 150 x 315 mm 130 x 295 x 55 mm 520.828.0 2KVM- 9/1 UP doorbell panel 9 150 x 375 mm 130 x 355 x 55 mm 520.928.0 2KVM-10/1 UP doorbell panel 10 150 x 375 mm 130 x 355 x 55 mm 521.028.0 2KVM-11/1 UP doorbell panel 11 150 x 435 mm 130 x 415 x 55 mm 521.128.0 2KVM-12/1 UP doorbell panel 12 150 x 435 mm 130 x 415 x 55 mm 521.228.0 2

2-row call buttons

KVM- 6/2 UP doorbell panel 6 230 x 145 mm 210 x 125 x 55 mm 520.628.1 2KVM- 8/2 UP doorbell panel 8 230 x 205 mm 210 x 185 x 55 mm 520.828.1 2KVM-10/2 UP doorbell panel 10 230 x 205 mm 210 x 185 x 55 mm 521.028.1 2KVM-12/2 UP doorbell panel 12 230 x 265 mm 210 x 245 x 55 mm 521.228.1 2

105

ELCOM.

ELCOM.

ESTA

The ESTA Kontur program

The ESTA Kontur series offers modern materi-

als and component technology in a timeless,

classic form, and is therefore outstandingly

well suited for exclusive older or historical buil-

dings.

The Kontur series is characterised by very high

stability, its high-quality stainless steel compo-

nents and specific security features standing

for long service life and protection from mani-

pulation and damage.

Its construction with high-wear PVD brass

coating harmonises very nicely with sandsto-

ne, marble and old masonry, blending per-

fectly into a representative entryway design.

Basic Kontur version data: . 2mm thick matte brushed stainless steel

front plate . High-quality stainless steel keypad . Flush-mounted name plate with integrated

LED lighting . Special stainless steel security screws . Video preparation free of charge

In the brass variant, all the stainless steel

elements are coated in PVD.

Robust and timeless



Standard ESTA door stations offered with audio preparation for ELA door speakers. Preparation for BTC or BEC video cameras is

available free of charge (assuming no change in dimensions). When ordering, please specify the corresponding item number

for the video preparation. Please note our cost-effective audio/video kits on pages 62 - 65.

BTC / BEC

106

ELCOM.

ELCOM.


Stainless steel front plate 2 mm, matte brushed, special security

screws, flush-mounted box 55 mm in installed depth

. High-quality stainless steel call button . Flush-mounted name plate . White LED illumination (12VAC) . Name plates can be replaced from



Serial TVG

TVG-10/2

TVG-18/3






BTC / BEC

TVG-4/1


1-row call button

TVG- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 110.118.0 2TVG- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 110.218.0 2TVG- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 110.318.0 2TVG- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 110.418.0 2TVG- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 110.518.0 2TVG- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 110.618.0 2TVG- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 110.718.0 2TVG- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 110.818.0 2TVG- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 110.918.0 2TVG-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 111.018.0 2TVG-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 111.118.0 2TVG-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 111.218.0 2

2-row call buttons

TVG- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 110.418.1 2TVG- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 110.618.1 2TVG- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 110.818.1 2TVG-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 111.018.1 2TVG-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 111.218.1 2TVG-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 111.418.1 2TVG-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 111.618.1 2TVG-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 111.818.1 2

3-row call buttons

TVG- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 110.918.2 2TVG-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 111.218.2 2TVG-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 111.518.2 2TVG-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 111.818.2 2

107

ELCOM.

ELCOM.

ESTA


Stainless steel front plate, 2 mm, polished, PVD brass coated, special

security screws, flush-mounted box 55 mm in installed depth

. High-quality stainless steel call button . Flush-mounted name plate . White LED illumination (12VAC) . Name plates can be replaced from


PVD brass, polished

Serial TMG

TMG-10/2

TMG-18/3






BTC / BEC

TMG-4/1


1-row call button

TMG- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 110.189.0 2TMG- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 110.289.0 2TMG- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 110.389.0 2TMG- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 110.489.0 2TMG- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 110.589.0 2TMG- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 110.689.0 2TMG- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 110.789.0 2TMG- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 110.889.0 2TMG- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 110.989.0 2TMG-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 111.089.0 2TMG-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 111.189.0 2TMG-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 111.289.0 2

2-row call buttons

TMG- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 110.489.1 2TMG- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 110.689.1 2TMG- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 110.889.1 2TMG-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 111.089.1 2TMG-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 111.289.1 2TMG-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 111.489.1 2TMG-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 111.689.1 2TMG-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 111.889.1 2

3-row call buttons

TMG- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 110.989.2 2TMG-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 111.289.2 2TMG-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 111.589.2 2TMG-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 111.889.2 2

108

Variant EUPpre-mounted, rectangular projecting frame, stainless steel (30 mm on all sides), doors and letter flaps in stainless steel matte, name plates replaceable from the front.

Letter box systems with other dimensions or for a greater number of units upon request (EUP-x/x custom).

Variant EUT pre-mounted, rectangular projecting frame, stainless steel (30 mm on all sides), doors and letter flaps in stainless steel matte, name plates replaceable from the front. Door electron-ics slot with stainless steel keypad and LED-illuminated name plates (12VAC) replaceable from the front. With premounted ELA speaker bracket for quick installation of the door speaker without tools. ELA door speaker not included.

Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 62 – 65. Letter box systems with other dimensions or for a greater number of units upon request (EUT-x/x custom).

Variant EUT

Flush-mounted letter box systems

Variant EUP

EUT-1/1 EUT-2/2 EUT-3/3 individual

EUP-1/1 EUP-2/2 EUP-x/x individual

* = UPG flush-mounted chassis

* = UPG flush-mounted chassis

Designation Front (W x H) UPG* (W x H x D) Item no. DG

Variant EUT

EUT-1/1 Letter box systems 435 x 515 mm 385 x 465 x 110 mm 322.211.1 2EUT-2/2 Letter box systems 810 x 515 mm 760 x 465 x 110 mm 322.212.2 2EUT-x/x Letter box systems according to requirements 322.219.9 2

Designation Front (W x H) UPG* (W x H x D) Item no. DG

Variant EUP

EUP-1/1 Letter box systems 435 x 380 mm 385 x 330 x 110 mm 323.211.1 2EUP-2/2 Letter box systems 810 x 380 mm 760 x 330 x 110 mm 323.212.2 2EUP-x/x Letter box systems according to requirements 323.219.9 2

109

ESTA

Variant EAT

Variant EAPSurrounding close stainless steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte, name plates replaceable from the front.

Letter box systems with other dimensions or for a greater number of units upon request (EAP-x/x custom).

Variant EATSurrounding close stainless steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte. Door electronics slot with stainless steel keypad and LED-illuminated name plates (12VAC) replaceable from the front. With premounted ELA speaker bracket for quick installation of the door speaker without tools. ELA door speaker not included.

Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 62 – 65. Letter box systems with other dimensions or for a greater number of units upon request (EAT-x/x custom).

Wall-mounted letter box systems

Variant EAP

EAT-1/1 EAT-2/2 EAT-x/x individual

EAP-1/1 EAP-2/2 EAP-x/x individual

Designation Dim. (W x H x D) Item no. DG

Variant EAT

EAT-1/1 Letter box systems 380 x 460 x 110 mm 328.211.1 2EAT-2/2 Letter box systems 755 x 460 x 110 mm 328.212.2 2EAT-x/x Letter box systems acc. to requirements 328.219.9 2


Ausführung EAP

EAP-1/1 Letter box systems 380 x 325 x 110 mm 329.211.1 2EAP-2/2 Letter box systems 755 x 325 x 110 mm 329.212.2 2EAP-x/x Letter box systems acc. to requirements 329.219.9 2

110

EMP Letter box frontof 2 mm stainless steel, matte brushed, name plates replaceable from the front.

Letter box front panels with other dimensions or for a greater number of units upon request (EMP-x/x custom).

AMP Letter box front of 2 mm stainless steel, coated in PVD brass, polished, name plates replaceable from the front.

Letter box front panels with other dimensions or for a greater number of units upon request (AMP-x/x custom).

BDP Pass-through boxes 1-partsDepth can be pulled out.

BDP Pass-through boxes pre-mounted, mail door on back, painted RAL 9006 (white aluminium).Pass-through boxes for a greater number of units upon request (BDP-x/x custom).

BDP Pass-through boxes 2-partsDepth can be pulled out.

BDP Pass-through boxes Number of units as speci-fied. Depth can be pulled out.

Pass-through letter box systems

EMP Letter box front

AMP Letter box front

BDP Pass-through boxes

EMP-x/x individual

AMP-x/x individual

EMP-2/1

AMP-2/1

EMP-1/1

AMP-1/1

125

125 125

260 – 380 mm

260 – 380 mm

125

125

125

380 – 500 mm

380 – 500 mm

260 – 380 mm380 – 500 mm

Designation Dim. (W x H) Item no. DG

EMP Letter box front

EMP-1/1 Letter box front 360 x 185 mm 324.220.1 2EMP-2/1 Letter box front 360 x 310 mm 324.220.2 2EMP-x/x Letter box front acc. to requirem. 324.229.9 2


AMP Letter box front

AMP-1/1 Letter box front 360 x 185 mm 325.320.1 2AMP-2/1 Letter box front 360 x 310 mm 325.320.2 2AMP-x/x Letter box front acc. to requirem. 325.329.9 2

Designation Dimensions (W x H x D - D) Item no. DG

BDP-L Pass-through boxes

BDP-1/1-L Box 340 x 165 x 380 mm - 500 mm 320.181.1 2BDP-2/1-L Box 340 x 290 x 380 mm - 500 mm 320.182.1 2BDP-x/x Box Depending on number of units 320.189.9 2


BDP-K Pass-through boxes

BDP-1/1-K Box 340 x 165 x 260 mm - 380 mm 320.181.0 2BDP-2/1-K Box 340 x 290 x 260 mm - 380 mm 320.182.0 2BDP-x/x Box Depending on number of units 320.189.9 2

111

ESTA

Pass-through letter box systems

EMT Letter box frontof 2 mm stainless steel, matte brushed, door electronics slot, stainless steel call button, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required). With premounted ELA speaker bracket for a quick installa-tion. ELA door speaker not included.Letter box front panels with other dimensions or for a greater number of units upon request (EMT-x/x custom).

AMT Letter box front of 2 mm stainless steel, coated in PVD brass polished, door electron-ics slot, stainless steel call button, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required). With premounted ELA speaker bracket for a quick instal-lation. ELA door speaker not included.Letter box front panels with other dimensions or for a greater number of units upon request (AMT-x/x custom).

BDT Pass-through boxes 1-partsDepth can be pulled out.

BDT Pass-through boxes pre-mounted, with door electronics slot for EMT and AMT, mail door on back, painted RAL 9006 (white aluminium). Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 62 – 65. Pass-through boxes for a greater number of units upon request (BDT-x/x custom).

BDT Pass-through boxes 2-partsDepth can be pulled out.

BDT Pass-through boxes Number of units as speci-fied. Depth can be pulled out.

EMT Letter box front

AMT Letter box front

BDT Pass-through boxes

AMT-x/x individual

EMT-x/x individual

AMT-2/1

EMT-2/1

AMT-1/1

EMT-1/1

125

125

125

125

125

125

125

125

125

260 – 380 mm380 – 500 mm

260 – 380 mm380 – 500 mm

260 – 380 mm380 – 500 mm


EMT Letter box front

EMT-1/1 Letter box front 360 x 310 mm 324.210.1 2EMT-2/1 Letter box front 360 x 435 mm 324.210.2 2EMT-x/x Letter box front acc. to requirem. 324.219.9 2


AMT Letter box front

AMT-1/1 Letter box front 360 x 310 mm 325.310.1 2AMT-2/1 Letter box front 360 x 435 mm 325.310.2 2AMT-x/x Letter box front acc. to requirem. 325.319.9 2


BDT-L Pass-through boxes

BDT-1/1-L Box 340 x 290 x 380 mm - 500 mm 320.191.1 2BDT-2/1-L Box 340 x 415 x 380 mm - 500 mm 320.192.1 2BDT-x/x Box Depending on number of units 320.199.9 2


BDT-K Pass-through boxes

BDT-1/1-K Box 340 x 290 x 260 mm - 380 mm 320.191.0 2BDT-2/1-K Box 340 x 415 x 260 mm - 380 mm 320.192.0 2BDT-x/x Box Depending on number of units 320.199.9 2

112

Fence-mounted letter box systems

Variant EZT

Variant EZP Front plate of 2 mm stainless steel, matte, with surrounding projection (30 mm), letter slots in front, letter removal door in back, as well as 4-sided close cladding of stainless steel, matte. Name plates replaceable from the front.

Letter box systems with other dimensions or for a greater number of units upon request (EZP-x/x custom).

Variant EZT Front plate of 2 mm stainless steel, matte, with surrounding projection (30 mm), letter slots in front, letter removal door in back, as well as 4-sided close cladding of stainless steel, matte. Name plates replaceable from the front. Door electronics slot with stainless steel keypad and LED-illuminated name plates (12VAC) replaceable from the front. With premounted ELA speaker bracket for quick installation of the door speaker without tools. ELA door speaker not included.

Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 62 – 65. Letter box systems with other dimensions or for a greater number of units upon request (EZT-x/x custom).

Variant EZP

EZT-1/1 EZT-2/2 EZT-x/x individual

EZP-1/1 EZP-2/2 EZP-x/x individual


Variant EZT

EZT-1/1 Letter box systems 435 x 515 x 112 mm 326.211.1 2EZT-2/2 Letter box systems 810 x 515 x 112 mm 326.212.2 2EZT-x/x Letter box systems acc. to requirem. 326.219.9 2


Variant EZP

EZP-1/1 Letter box systems 435 x 380 x 112 mm 327.211.1 2EZP-2/2 Letter box systems 810 x 380 x 112 mm 327.212.2 2EZP-x/x Letter box systems acc. to requirem. 327.219.9 2

113

ESTA

ESP-1/1 ESP-2/2

Variant ESPStainless steel stand pipe (60 mm in diameter) with-screw-on foot plate, includ-ing fasteners, surrounding close stainless steel clad-ding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte, name plates replaceable from the front.

Letter box systems with other dimensions or for a greater number of units upon request (ESP-x/x cus-tom).

Variant EST Stainless steel stand pipe (60 mm in diameter) with screw-on foot plate, including fasteners, surrounding close stain-less steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte, name plates replaceable from the front. Door electronics slot with stainless steel keypad and LED-illuminated name plates (12VAC) replaceable from the front. With premounted ELA speaker bracket for quick installation of the door speaker without tools. ELA door speaker not included.

Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 62 – 65. Letter box systems with other dimensions or for a greater number of units upon request (EST-x/x custom). Height with video: 1610 mm

Variant EST

Variant ESP

EST-1/1 EST-2/2

Free-standing letter box systems

EST-x/x individual

ESP-x/x individual


Variant ESP

ESP-1/1 Letter box systems 380 x 1510 x 190 mm 321.211.1 2ESP-2/2 Letter box systems 915 x 1510 x 110 mm 321.212.2 2ESP-x/x Letter box systems acc. to requirem. 321.219.9 2


Variant EST

EST-1/1 Letter box systems 380 x 1510 x 190 mm 320.211.1 2EST-2/2 Letter box systems 915 x 1510 x 110 mm 320.212.2 2EST-x/x Letter box systems acc. to requirem. 320.219.9 2

115

S

STA

BILA

Design and emphasize features entirely according to your taste: ELCOM has the versatile program to view guests and mail in colour.

Door stations in ELOXAL and RAL colours

116

ELCOM.

ELCOM.

The STABILA program

The STABILA program is one of our classics,

and due to its stability and long life, it enjoys

great popularity in the multifamily residential

construction industry.

The design is timeless and the construction

very resilient and easy to maintain. That makes

the STABILA line a very long-lasting and thus

profitable investment for rental societies.

. Delicate projecting frame profile with

screw-on metal back wall . Built-in set for sunken installation of the

projecting frame profile . Modern, attractive ZENTRA call buttons . New, space-saving speaker profile grate . All special stainless steel security screws . Video preparation free of charge

Robust and long-lasting



Standard STABILA door stations offered with audio preparation for ELA door speakers. Preparation for BTC or BEC video cam-

eras is available free of charge (assuming change in dimensions). When ordering, please specify the corresponding item

number for the video preparation. Please note our cost-effective audio/video kits on pages 62 - 65.

BTC / BEC

Side view - wall-mounted variant TAP

Framework system with 42mm installation height.

117

STA

BILA

Serial TUP


EV1 – Anodised aluminium RAL 9016 Traffic white RAL as specified


TUP flush-mounted door stationAluminium front plate 3 mm, special safety screws, flush-mounted box 55 mm in depth, with ZENTRA call button:

. Push button of matte stainless steel

. High-quality microswitch

. Built-in white LED illumination (12VAC)

. Homogeneous area lighting

. Name plates can be replaced from


With premounted ELA speaker bracket for quick installa-tion of the door speaker without tools. ELA door speaker not included.

TUP-15/3

TUP-8/2

Designation Buttons Front (W x H) UPK* (W x H x D) EV1 RAL 9016 RAL spec. DG

1-row call button

TUP- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 530.151.0 530.154.0 530.159.0 2TUP- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 530.251.0 530.254.0 530.259.0 2TUP- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 530.351.0 530.354.0 530.359.0 2TUP- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 530.451.0 530.454.0 530.459.0 2TUP- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 530.551.0 530.554.0 530.559.0 2TUP- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 530.651.0 530.654.0 530.659.0 2TUP- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 530.751.0 530.754.0 530.759.0 2TUP- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 530.851.0 530.854.0 530.859.0 2TUP- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 530.951.0 530.954.0 530.959.0 2TUP-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 531.051.0 531.054.0 531.059.0 2TUP-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 531.151.0 531.154.0 531.159.0 2TUP-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 531.251.0 531.254.0 531.259.0 2

2-row call buttons

TUP- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 530.451.1 530.454.1 530.459.1 2TUP- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 530.651.1 530.654.1 530.659.1 2TUP- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 530.851.1 530.854.1 530.859.1 2TUP-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 531.051.1 531.054.1 531.059.1 2TUP-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 531.251.1 531.254.1 531.259.1 2TUP-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 531.451.1 531.454.1 531.459.1 2TUP-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 531.651.1 531.654.1 531.659.1 2TUP-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 531.851.1 531.854.1 531.859.1 2

3-row call buttons

TUP- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 530.951.2 530.954.2 530.959.2 2TUP-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 531.251.2 531.254.2 531.259.2 2TUP-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 531.551.2 531.554.2 531.559.2 2TUP-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 531.851.2 531.854.2 531.859.2 2

118

Serial TAP

Wall-mounted door stations with frame

TAP wall-mounted door stations with frameAluminium front plate 3 mm, special safety screws, frame system 42 mm in depth, with new ZENTRA call button:







With premounted ELA speaker bracket for quick installa-tion of the door speaker without tools. ELA door speaker not included.

EV1 – Anodised aluminium RAL 9016 Traffic white RAL as specified

TAP-15/3

TAP-8/2

Designation Call button Dimensions (W x H x D) EV1 RAL 9016 RAL spec. DG

1-row call button

TAP- 1/1 Wall-mounted door station 1 145 x 250 x 42 mm 540.171.0 540.174.0 540.179.0 2TAP- 2/1 Wall-mounted door station 2 145 x 250 x 42 mm 540.271.0 540.274.0 540.279.0 2TAP- 3/1 Wall-mounted door station 3 145 x 310 x 42 mm 540.371.0 540.374.0 540.379.0 2TAP- 4/1 Wall-mounted door station 4 145 x 310 x 42 mm 540.471.0 540.474.0 540.479.0 2TAP- 5/1 Wall-mounted door station 5 145 x 370 x 42 mm 540.571.0 540.574.0 540.579.0 2TAP- 6/1 Wall-mounted door station 6 145 x 370 x 42 mm 540.671.0 540.674.0 540.679.0 2TAP- 7/1 Wall-mounted door station 7 145 x 430 x 42 mm 540.771.0 540.774.0 540.779.0 2TAP- 8/1 Wall-mounted door station 8 145 x 430 x 42 mm 540.871.0 540.874.0 540.879.0 2TAP- 9/1 Wall-mounted door station 9 145 x 490 x 42 mm 540.971.0 540.974.0 540.979.0 2TAP-10/1 Wall-mounted door station 10 145 x 490 x 42 mm 541.071.0 541.074.0 541.079.0 2TAP-11/1 Wall-mounted door station 11 145 x 550 x 42 mm 541.171.0 541.174.0 541.179.0 2TAP-12/1 Wall-mounted door station 12 145 x 550 x 42 mm 541.271.0 541.274.0 541.279.0 2

2-row call buttons

TAP- 4/2 Wall-mounted door station 4 225 x 260 x 42 mm 540.471.1 540.474.1 540.479.1 2TAP- 6/2 Wall-mounted door station 6 225 x 260 x 42 mm 540.671.1 540.674.1 540.679.1 2TAP- 8/2 Wall-mounted door station 8 225 x 320 x 42 mm 540.871.1 540.874.1 540.879.1 2TAP-10/2 Wall-mounted door station 10 225 x 320 x 42 mm 541.071.1 541.074.1 541.079.1 2TAP-12/2 Wall-mounted door station 12 225 x 380 x 42 mm 541.271.1 541.274.1 541.279.1 2TAP-14/2 Wall-mounted door station 14 225 x 380 x 42 mm 541.471.1 541.474.1 541.479.1 2TAP-16/2 Wall-mounted door station 16 225 x 440 x 42 mm 541.671.1 541.674.1 541.679.1 2TAP-18/2 Wall-mounted door station 18 225 x 440 x 42 mm 541.871.1 541.874.1 541.879.1 2

3-row call buttons

TAP- 9/3 Wall-mounted door station 9 330 x 290 x 42 mm 540.971.2 540.974.2 540.979.2 2TAP-12/3 Wall-mounted door station 12 330 x 290 x 42 mm 541.271.2 541.274.2 541.279.2 2TAP-15/3 Wall-mounted door station 15 330 x 350 x 42 mm 541.571.2 541.574.2 541.579.2 2TAP-18/3 Wall-mounted door station 18 330 x 350 x 42 mm 541.871.2 541.874.2 541.879.2 2

119

STA

BILA

Flush-mounted built-in set for wall-mounted door stations

TUE flush-mounted built-in set

TUE flush-mounted built-in setpermits the flush mounting of the STABILA TAP projecting frame. The slim projecting frame lends a timeless appear-ance.

The TAP wall-mounted door station is screwed onto the flush-mounted box using special bolt fasteners.

The built-in set is comprised of: - Flush-mounted box, stainless steel - Fastening and packing material

Flush-mounted installation with delicate frame profile.

Designation for door station Dim. (W x H x D) Item no. DG

1-row built-in set

TUE- 2/1 Flush-mounted built-in set TAP- 1/1 and 2/1 130 x 235 x 55 mm 550.102.0 2TUE- 4/1 Flush-mounted built-in set TAP- 3/1 and 4/1 130 x 295 x 55 mm 550.304.0 2TUE- 6/1 Flush-mounted built-in set TAP- 5/1 and 6/1 130 x 355 x 55 mm 550.506.0 2TUE- 8/1 Flush-mounted built-in set TAP- 7/1 and 8/1 130 x 415 x 55 mm 550.708.0 2TUE-10/1 Flush-mounted built-in set TAP- 9/1 and 10/1 130 x 475 x 55 mm 550.910.0 2TUE-12/1 Flush-mounted built-in set TAP-11/1 and 12/1 130 x 535 x 55 mm 551.112.0 2

2-row built-in set

TUE- 6/2 Flush-mounted built-in set TAP- 4/2 and 6/2 210 x 245 x 55 mm 550.406.1 2TUE-10/2 Flush-mounted built-in set TAP- 8/2 and 10/2 210 x 305 x 55 mm 550.810.1 2TUE-14/2 Flush-mounted built-in set TAP-12/2 and 14/2 210 x 365 x 55 mm 551.214.1 2TUE-18/2 Flush-mounted built-in set TAP-16/2 and 18/2 210 x 425 x 55 mm 551.618.1 2

3-row built-in set

TUE-12/3 Flush-mounted built-in set TAP- 9/3 and 12/3 315 x 275 x 55 mm 550.912.2 2TUE-18/3 Flush-mounted built-in set TAP-15/3 and 18/3 315 x 335 x 55 mm 551.518.2 2

120

KUP flush-mounted doorbell panelAluminium front plate 3 mm, silver galvanised (EV1), special safety screws, flush-mounted box 55 mm in depth, with ZENTRA call button.

KAP wall-mounted doorbell panelAluminium front plate 3 mm, silver galvanised (EV1), special safety screws, aluminium frame system 42 mm in depth, mounted back wall, with ZENTRA call button.

KAP wall-mounted doorbell panel

KUP flush-mounted doorbell panel

Aluminium doorbell panels

KUP-8/2

KAP-6/1


Functions of the ZENTRA call button







Functions of the ZENTRA call button







Designation Buttons Dim. (W x H x D) Item no. DG

1-row call button

KAP- 1/1 AP doorbell panel 1 145 x 105 x 42 mm 570.121.0 2KAP- 2/1 AP doorbell panel 2 145 x 105 x 42 mm 570.221.0 2KAP- 3/1 AP doorbell panel 3 145 x 165 x 42 mm 570.321.0 2KAP- 4/1 AP doorbell panel 4 145 x 165 x 42 mm 570.421.0 2KAP- 5/1 AP doorbell panel 5 145 x 225 x 42 mm 570.521.0 2KAP- 6/1 AP doorbell panel 6 145 x 225 x 42 mm 570.621.0 2KAP- 7/1 AP doorbell panel 7 145 x 285 x 42 mm 570.721.0 2KAP- 8/1 AP doorbell panel 8 145 x 285 x 42 mm 570.821.0 2KAP- 9/1 AP doorbell panel 9 145 x 345 x 42 mm 570.921.0 2KAP-10/1 AP doorbell panel 10 145 x 345 x 42 mm 571.021.0 2KAP-11/1 AP doorbell panel 11 145 x 405 x 42 mm 571.121.0 2KAP-12/1 AP doorbell panel 12 145 x 405 x 42 mm 571.221.0 2

2-row call buttons

KAP- 6/2 AP doorbell panel 6 225 x 140 x 42 mm 570.621.1 2KAP- 8/2 AP doorbell panel 8 225 x 200 x 42 mm 570.821.1 2KAP-10/2 AP doorbell panel 10 225 x 200 x 42 mm 571.021.1 2KAP-12/2 AP doorbell panel 12 225 x 260 x 42 mm 571.221.1 2


1-row call button

KUP- 1/1 UP doorbell panel 1 150 x 135 mm 130 x 115 x 55 mm 560.121.0 2KUP- 2/1 UP doorbell panel 2 150 x 135 mm 130 x 115 x 55 mm 560.221.0 2KUP- 3/1 UP doorbell panel 3 150 x 195 mm 130 x 175 x 55 mm 560.321.0 2KUP- 4/1 UP doorbell panel 4 150 x 195 mm 130 x 175 x 55 mm 560.421.0 2KUP- 5/1 UP doorbell panel 5 150 x 255 mm 130 x 235 x 55 mm 560.521.0 2KUP- 6/1 UP doorbell panel 6 150 x 255 mm 130 x 235 x 55 mm 560.621.0 2KUP- 7/1 UP doorbell panel 7 150 x 315 mm 130 x 295 x 55 mm 560.721.0 2KUP- 8/1 UP doorbell panel 8 150 x 315 mm 130 x 295 x 55 mm 560.821.0 2KUP- 9/1 UP doorbell panel 9 150 x 375 mm 130 x 355 x 55 mm 560.921.0 2KUP-10/1 UP doorbell panel 10 150 x 375 mm 130 x 355 x 55 mm 561.021.0 2KUP-11/1 UP doorbell panel 11 150 x 435 mm 130 x 415 x 55 mm 561.121.0 2KUP-12/1 UP doorbell panel 12 150 x 435 mm 130 x 415 x 55 mm 561.221.0 2

2-row call buttons

KUP- 6/2 UP doorbell panel 6 230 x 145 mm 210 x 125 x 55 mm 560.621.1 2KUP- 8/2 UP doorbell panel 8 230 x 205 mm 210 x 185 x 55 mm 560.821.1 2KUP-10/2 UP doorbell panel 10 230 x 205 mm 210 x 185 x 55 mm 561.021.1 2KUP-12/2 UP doorbell panel 12 230 x 265 mm 210 x 245 x 55 mm 561.221.1 2

121

STA

BILA

123

Spar

e pa

rts

Wherever ELCOM is, you find solid, long-lasting quality. And spare parts logistics for maximum protection of in-vestment. Even during upgrades, you can always rely on our optimum delivery service.

Spare parts

124

Spare parts 1+n

Single components video intercoms 1+n

HT-VMO-802, 1+n Replacement audio unit for the VMO-802 video intercom

MO-VMO/BVMReplacement video unit for the VMO-802 video intercom

HT universal 2, 1+n Universal intercomconfigurable for 302+402 systems.

HT-802, 1+nIntercom with call volume control

Audio intercoms 1+n

CCV-402, 1+n Built-in B/W camera module

Camera module 1+n

KPS doorbell panelfor existing UP boxes in plate structures; smooth, 3mm aluminium front plate, silver galvanised (EV1), combination call button with name plate re-placement from the front.

KPS doorbell panel

Designation System Variant Item no. DG

Single components video intercoms

HT-VMO-802 Audio unit 1+n white 008.500.100 2MO-VMO/BVM Video unit - white 008.500.006 2

Intercoms

HT-Universal2 Intercom 1+n white 130.881.0 2HT-802 Intercom 1+n white 130.860.8 2

Camera module

CCV-402 Built-in camera mod. 1+n B/W 231.300.2 2

Designation Variant Colour Item no. DG

KPS doorbell panels

KPS- 8/2 UP doorbell panel 133 x 173 mm EV1 galvanised 991.008.S 2KPS-10/2 UP doorbell panel 133 x 173 mm EV1 galvanised 991.010.S 2KPS-12/2 UP doorbell panel 133 x 173 mm EV1 galvanised 991.012.S 2

125

Spar

e pa

rts

Spare parts 1+n

SR-12, 1+nControl relay Potential-free Switch contact

ZRT-100 BWDoor opener time relayFastening tray

ZRT-100 HSDoor opener time relayTop-hat rail mounting.

VUG-220 A, 1+nVideo switch

VUG-220 B, 1+nVideo switch

USG-2 BW, 1+nUSG-2 HS, 1+nTone generator for storey callVoice route switching unit for storey door stations. BW = fastening tray HS = top-hat rail mounting.

VVE-103, 1+nThree-way video distributor

VVE-105, 1+nFive-way video distributor

TDM-HS, 1+nDoor opener any time function Note: Only for systems with potential isolation.Top-hat rail mounting.

System components 1+n

RMS-4/6/10 BWPrivacy feature 1+nFastening tray

RMG-10 BW, 1+nDiode distributorNote:No RMS module can be mounted!

ELA-302, 1+nELA-402 ERG, 1+nDoor electronics

TLA-402, 1+nTLA-402 ERG, 1+nDoor electronics

USG-200AVoice switching unit Voice route switching unit for 2 door stations. Can be extended to another 2 door stations with another USG-200B. Cascading to up to 10 doors. Top-hat rail mounting.


Built-in door electronics

TLA-402 Built-in door electronics 1+n 120.411.0 2TLA-402 ERG Built-in door electronics 1+n 120.411.3 2ELA-302 Built-in door electronics 1+n 120.331.0 2ELA-402 ERG Built-in door electronics 1+n 120.431.3 2

Splitting amplifier and switching units

VVE-103 Video distributor 3 ways 231.610.3 2VVE-105 Video distributor 5 ways 231.610.5 2VUG-220 A Video switch 1+n 231.614.0 2VUG-220 B Video switch 1+n 231.614.1 2USG-200 A Voice switching unit, 2 doors 1+n 140.006.0 2USG-200 B Voice swit. unit, add. doors 1+n 140.006.1 2USG-2 BW Tone generator (storey call) 1+n 140.005.6 2USG-2 HS Tone generator (storey call) 1+n 140.005.5 2

Privacy feature and diode distributor

RMS-4 BW Privacy feature 4 intercoms 140.001.4 2RMS-6 BW Privacy feature 6 intercoms 140.001.6 2RMS-10 BW Privacy feature 10 intercoms 140.011.0 2RMG-10 BW Diode distributor 1+n 140.010.0 2

Others

ZRT-100 BW Door opener time relay universal 120.103.3 2ZRT-100 HS Door opener time relay universal 120.103.2 2TDM-HS Door opener any time 1+n 120.106.0 2SR-12 Control relay 1+n 140.003.0 2

126

Spare parts i2 bus

Video intercoms i2 bus

BVM-100, i2-BUS Video intercom, B/WColour: whiteDimensions (W x H x D): 240 x 240 x 63 mm

HT-BVM-100, i2-BUS Replacement audio unit for the BVM-100 video intercom

MO-VMO/BVMReplacement video unit for the BVM-100 video intercoms

BVF-230 E, i2-BUSVideo hands-free intercomStainless steel frontplate, square

Telecommunications interface i2-BUS

BTI-256i2 bus telecommunications interfaceHousing: 185 x 215 x 42 mm, wall mountedPower supply: 230 V / 50 Hz AC adaptor included


Video intercoms

BVF-230/E Video intercom i2-BUS square 183.232.0 2BVM-100 Video intercom i2-BUS white 182.100.0 2

Single components video intercoms

HT-BVM-100 Audio unit i2-BUS white 008.500.101 2MO-VMO/BVM Video unit i2-BUS white 008.500.006 2


Telecommunications interface

BTI-256 PBX Interface i2-BUS white 190.140.0 2

127

Spar

e pa

rts

Spare parts i2 bus

Lighting for door stations

LED illumination12 V, AC/DC

SGR-210Voltage rectifier regulatorFor power supply to FLMMODESTA area lighting

Input: 12V / ACOutput: 10V / DC

KOMPAKT audio and video door stations i2 bus

BTV-230 KOMPAKT colour video door station, wall-mountedDimensions (W x H x D): 102 x 206 x 32 mm

BTV-230 WS = Colour: whiteBTV-230 SI = Colour: silver

BTA-230KOMPAKT colour audio door station, wall- mountedDimensions (W x H x D): 102 x 206 x 32 mm

BTA-230 WS = Col.: whiteBTA-230 SI = Colour: silver

CCV-100 and CCV-200 built-in camera modulescan be replaced with the BEC-200 camera module. See technical data on page 22.

CCS-100 and CCS-110 exterior camerascan be replaced with the CCS-200/210 exterior cameras. See technical data on page 22.

Replacement for cameras i2 bus


LED illumination

LED illumination 60 mm green 150.511.4 2LED illumination 80 mm green 150.511.3 2LED illumination 120 mm green 150.511.5 2LED illumination 180 mm green 150.511.6 2LED illumination 225 mm green 150.511.7 2LED illumination 280 mm green 150.511.8 2LED illumination 550 mm green 150.511.9 2LED illumination 60 mm white 150.519.4 2LED illumination 80 mm white 150.519.3 2LED illumination 120 mm white 150.519.5 2LED illumination 180 mm white 150.519.6 2LED illumination 225 mm white 150.519.7 2LED illumination 280 mm white 150.519.8 2LED illumination 550 mm white 150.519.9 2LED-SPM-110 for MODESTA SPM-110 white 150.518.1 2LED-SPM-120 for MODESTA SPM-120 white 150.518.2 2LED-SPM-130 for MODESTA SPM-130 white 150.518.3 2LED-SPM-140 for MODESTA SPM-140 white 150.518.4 2

Voltage rectifier

SGR-210 Voltage rectifier for FLM 120.021.0 2


KOMPAKT video door stations

BTV-230 SI Video door station i2-BUS silver 280.001.0 2BTV-230 WS Video door station i2-BUS white 280.004.0 2

KOMPAKT audio door stations

BTA-230 SI Audio door station i2-BUS silver 270.001.0 2BTA-230 WS Audio door station i2-BUS white 270.004.0 2


Replacement for the CCV-100 and CCV-200 camera modules

BEC-200 Built-in camera i2-BUS 6-wire 181.330.2 2

Replacement for CCS-100 and CCS-110 exterior cameras

CCS-200 Outdoor camera i2-BUS 6-wire 181.420.0 2CCS-210 Outdoor camera, tele i2-BUS 6-wire 181.421.0 2

128

Spare parts

AV2 Call buttonW x H: 74 x 22 mmSupport dim.: 71 x19 mm

AV2 Sign holder

AV2 Name plate insertW x H: 42 x 12 mm

AV2 Call button key

AV2 Light insert

Lighted button:External dim.: ø23 mmSupport dim.: ø16 mm

LT-101 LED, Alu EV1

LT-102 LED, MS gold

LT-103 LED, stainless steel, matte

LT-104 LED, black

AV3 Call buttonW x H: 82 x 24 mmSupport dim.: 80 x 19.8 mm

AV3Built-in name plateW x H: 70 x 20.3 mmSupport dim.: 50.7 x 16.3 mm

AV3 Sign holder

AV3 Name plate insertW x H: 49 x 13 mm

AV3 Call button key

AV3 Light insert

Call button:External dim.: ø21mmSupport dim.: ø18 mm

ESK-252 AEE Stainless steel, matte

ESK-252 ALBBrass, bronzed

ESK-252 AEM PVD brass

ESK-252 AEA PVD anthracite

ESK-252 AEC PVD chrome

Call buttons and name plates

GPMMODESTA engraved plate

AVZ-REB Call button, built-inW x H: 85 x 28 mmSupport dim.: 80 x 23.3 mm

AVZ-RHBCall button, rear-moun. Dim. (W x H): 94 x 27 mm

AVZ-RSHSign holder

AVZ-RNEName plate insertW x H: 59 x 12 mm

AVZ-RLE Light insert

AVZ-RAPConnector board and lightening unit

AVZ-NHB Name plate, rear-mountedDim: (W x H): 70 x 19 mm

AVZ-NHL name platelike the AVZ-NHP, without a lighting unit

AVZ-NSH Sign holder

AVZ-NNEName plate insertW x H: 49 x 12 mm

AVZ-NLE Light insert

AVZ-NAPConnector board and lightening unit

AVZ-SRN Keyfor call button and name plate


AVZ Call button

AVZ-RHB Call button, rear-mounted 150.468.0 2AVZ-REB Call button, built-in EV1 150.453.0 2AVZ-REB Call button, built-in RAL 9016 150.455.0 2AVZ-REB Call button, built-in RAL as specified 150.455.5 2AVZ-RSH Sign holder 839.700.0 2AVZ-RNE Name plate insert 150.458.2 2AVZ-RLE Light insert 150.458.0 2AVZ-RAP Connector board 150.459.0 2

AVZ Name plate

AVZ-NHB Name plate, rear mounted 150.451.0 2AVZ-NHL Name plate, rear mounted without light. 150.452.0 2AVZ-NSH Sign holder 839.800.0 2AVZ-NNE Name plate insert 150.458.3 2AVZ-NLE Light insert 150.458.1 2AVZ-NAP Connector board 150.459.1 2

AVZ Call button and name plate key

AVZ-SRN Call button/Name plate key 150.456.0 2

Lighted button

LT-101 Lighted button Alu EV1 150.316.1 2LT-102 Lighted button MS-gold 150.316.2 2LT-103 Lighted button Stainl. st., matte 150.316.3 2LT-104 Lighted button black 150.316.4 2


AV2

AV2 Call button EV1 150.413.0 2AV2 Sign holder 815.050.0 2AV2 Name plate insert 150.418.2 2AV2 Call button key 150.416.0 2AV2 Light insert 150.418.0 2

AV3

AV3 Built-in name plate 150.441.0 2AV3 Call button EV1 150.443.0 2AV3 Sign holder 829.700.0 2AV3 Name plate insert 829.700.1 2AV3 Call button key 150.446.0 2AV3 Light insert 150.448.0 2

Call button

ESK-252 AEE Call button Stainl. st., matte 150.314.1 2ESK-252 ALB Call button Brass, bronzed 150.400.1 2ESK-252 AEM Call button PVD brass 150.400.2 2ESK-252 AEC Call button PVD chrome 150.400.3 2ESK-252 AEA Call button PVD anthracite 150.400.5 2

GPM

GPM Engraved plate Stainless steel 150.328.1 2

129

Spar

e pa

rts

Special key WINXfor all WINX door stations

Keyfor two-holed screw

Screw Two-holed

Special key SW6 ZY

Special stainless steel screw, matte ZYPVD-MS ZYPVD-AN ZYPVD-CR ZY

Spare parts

Letter box locks:

BKS-100 ESTA IKS-100 ESTA BKS-110 STABILA IKS-110 STABILA BKS-120 SMB/SMF

each including 2 keys

TMD combination call buttonW x H: 65 x 21.7 mmSupport dim.: 61 x 18 mm

TMD replacement coverW x H: 57.2 x 14.4 mm

KPS combination call buttonW x H: 63 x 21 mmSupport dim.: 60 x 18 mm

KPS replacement coverW x H: 57.2 x 14.4 mm

Locks, keys and screws

Allen screw M2.5x5 INB 1.5 mm

Allen screw M4x10 INB 2.5

Allen screw UNC 24 INB 2.5

Allen keyINB 1.5 mm

Allen key INB 2.5 mm

Letter box key:

BKS-200/210 ESTA / STABILA

IKS-200/210 ESTA ESTA / STABILA

BKS-220 SMB/SMF

BKN-STABILA Name plate


KPS

KPS combination call button Anthracite 150.217.0 2KPS replacement cover 150.213.4 2

TMD

TMD combination call button Crystal clear 150.217.4 2TMD replacement cover 150.213.2 2

BKN

BKN STABILA Name plate 150.470.0 2

Letter box locks

BKS-100 ESTA Letter box locks 150.470.1 2IKS-100 ESTA Insta box locks 150.470.2 2BKS-110 STABILA Letter box locks 150.471.1 2IKS-110 STABILA Insta box locks 150.471.2 2BKS-120 SMB/SMF Letter box locks 150.472.1 2

Letter box key

BKS-200/210 Letter box key 150.479.8 2IKS-200/210 Insta box key 150.479.9 2BKS-220 Letter box key 150.479.7 2


Screws

Screw M2.5x5 INB1.5 Stainless steel 033.002.9 2Screw M4x10 INB2.5 Stainless steel 033.003.4 2Screw UNC 24 INB2.5 Stainless steel 033.000.7 2Two-holed screw LI/SE Stainless steel 033.004.9 2Two-holed screw ZY Stainless steel 033.005.3 2Two-holed screw LI/SE PVD brass 033.004.6 2Two-holed screw ZY PVD brass 033.005.6 2Special screw ZY, M5x12 Stainless steel 033.007.0 2Special screw ZY, M5x22 Stainless steel 033.006.0 2Special screw ZY, M5x22 PVD brass 033.006.1 2Special screw ZY, M5x22 PVD anthrac. 033.006.2 2Special screw ZY, M5x22 PVD chrome 033.006.3 2Special screw ZY, M5x42 Stainless steel 033.008.0 2

Key

Allen key INB 1.5 033.000.9 2Allen key INB 2.5 033.000.8 2Key for two-holed screw 033.001.0 2Special key SW6 ZY 033.000.1 2Special key WINX 033.000.2 2

130

Product list – alphabetical

AEK-1 1+n audio kit 100.014.1 62 AEK-2 1+n audio kit 100.014.2 62 AKB-01 i2 audio kit 100.190.1 63 AKB-02 i2 audio kit 100.190.2 63 AKB-03 i2 audio kit 100.190.3 63 AKB-04 i2 audio kit 100.190.4 63 AKB-05 i2 audio kit 100.190.5 63 AKB-06 i2 audio kit 100.190.6 63 AKB-07 i2 audio kit 100.190.7 63 AKB-08 i2 audio kit 100.190.8 63 AKB-09 i2 audio kit 100.190.9 63 AKB-10 i2 audio kit 100.191.0 63 AKB-11 i2 audio kit 100.191.1 63 AKB-12 i2 audio kit 100.191.2 63 AKB-14 i2 audio kit 100.191.4 63 AKB-15 i2 audio kit 100.191.5 63 AKB-16 i2 audio kit 100.191.6 63 AKB-18 i2 audio kit 100.191.8 63 AKF-01 i2 audio kit 100.180.1 63 AKF-02 i2 audio kit 100.180.2 63 AKF-03 i2 audio kit 100.180.3 63 AKF-04 i2 audio kit 100.180.4 63 AKF-05 i2 audio kit 100.180.5 63 AKF-06 i2 audio kit 100.180.6 63 AKF-07 i2 audio kit 100.180.7 63 AKF-08 i2 audio kit 100.180.8 63 AKF-09 i2 audio kit 100.180.9 63 AKF-10 i2 audio kit 100.181.0 63 AKF-11 i2 audio kit 100.181.1 63 AKF-12 i2 audio kit 100.181.2 63 AKF-14 i2 audio kit 100.181.4 63 AKF-15 i2 audio kit 100.181.5 63 AKF-16 i2 audio kit 100.181.6 63 AKF-18 i2 audio kit 100.181.8 63 AKG-01/16 i2 audio kit 100.200.0 63 AMM-100 Modesta 581.040.0 88 AMM-engr. Modesta 880.020.4 89 AMP-1/1 Esta 325.320.1 110 AMP-2/1 Esta 325.320.2 110 AMP-x/x Esta 325.329.9 110 AMT-1/1 Esta 325.310.1 111 AMT-2/1 Esta 325.310.2 111 AMT-x/x Esta 325.319.9 111 ASP-1EL 1+n audio set 100.071.1 61 ASP-1WS 1+n audio set 100.071.4 61 ASP-2EL 1+n audio set 100.072.1 61 ASP-2WS 1+n audio set 100.072.4 61 ASU-1EL 1+n audio set 100.051.1 60 ASU-1WS 1+n audio set 100.051.4 60 ASU-2EL 1+n audio set 100.052.1 60 ASU-2WS 1+n audio set 100.052.4 60 ASZ-1EM 1+n audio set 100.071.8 58 ASZ-2EM 1+n audio set 100.072.8 58 AV2 button Spare part 150.413.0 128 AV2 holder Spare part 815.050.0 128 AV2 key Spare part 150.416.0 128 AV2 L-insert Spare part 150.418.0 128 AV2 N-insert Spare part 150.418.2 128 AV3 button Spare part 150.443.0 128 AV3 holder Spare part 829.700.0 128 AV3 key Spare part 150.446.0 128 AV3 L-insert Spare part 150.448.0 128 AV3 N-insert Spare part 829.700.1 128 AV3 sign Spare part 150.441.0 128 AVZ-NAP Spare part 150.459.1 128 AVZ-NHB Spare part 150.451.0 128 AVZ-NHL Spare part 150.452.0 128 AVZ-NLE Spare part 150.458.1 128 AVZ-NNE Spare part 150.458.3 128 AVZ-NSH Spare part 839.800.0 128 AVZ-RAP Spare part 150.459.0 128 AVZ-REB Spare part 150.453.0 128 AVZ-REB Spare part 150.455.0 128 AVZ-REB Spare part 150.455.5 128 AVZ-RHB Spare part 150.468.0 128 AVZ-RLE Spare part 150.458.0 128 AVZ-RNE Spare part 150.458.2 128 AVZ-RSH Spare part 839.700.0 128 AVZ-SRN Spare part 150.456.0 128 AZA-1EM 1+n audio set 100.091.9 59

AZA-2EM 1+n audio set 100.092.9 59

BAA-500 2D video 180.650.0 45 BAA-500 2D video 180.650.0 47 BAA-520 2D video 180.652.0 45 BAA-520 2D video 180.652.0 47 BBS-256 6D video 190.151.0 27 BBS-256 6D video 190.151.0 30 BDP-1/1-K Esta 320.181.0 110 BDP-1/1-L Esta 320.181.1 110 BDP-2/1-K Esta 320.182.0 110 BDP-2/1-L Esta 320.182.1 110 BDP-x/x Esta 320.189.9 110 BDT-1/1-K Esta 320.191.0 111 BDT-1/1-L Esta 320.191.1 111 BDT-2/1-K Esta 320.192.0 111 BDT-2/1-L Esta 320.192.1 111 BDT-x/x Esta 320.199.9 111 BEC-200 6D video 181.330.2 22 BEC-200 Spare part 181.330.2 127 BER-140 i2-BUS audio 190.214.0 25 BER-540 2D video 190.254.0 45 BFT-200 i2-BUS audio 171.200.0 19 BFT-500 2D video 171.500.0 41 BFT-500 2D video 171.500.0 47 BHT-200 i2-BUS audio 170.200.0 21 BHT-200 i2-BUS audio 170.200.0 47 BHT-280 i2-BUS audio 170.280.0 21 BHT-280 i2-BUS audio 170.280.0 47 BKM-003 6D video 190.124.8 29 BKM-012 6D video 190.124.9 29 BKM-024 6D video 190.125.0 29 BKM-048 6D video 190.125.1 29 BKM-141 6D video 190.124.1 29 BKM-142 6D video 190.124.2 29 BKM-143 6D video 190.124.3 29 BKM-144 6D video 190.124.4 29 BKM-145 6D video 190.124.5 29 BKN Spare part 150.470.0 129 BKS-100 Spare part 150.470.1 129 BKS-110 Spare part 150.471.1 129 BKS-120 Spare part 150.472.1 129 BKS-200/210 Spare part 150.479.8 129 BKS-220 Spare part 150.479.7 129 BKV-100 i2-BUS audio 190.121.0 25 BLA-100 i2-BUS audio 190.110.0 25 BLA-100 i2-BUS audio 190.110.0 47 BMM-200 Modesta 581.052.0 88 BPI-200 6D video 190.304.0 75 BPI-210 6D video 190.305.0 25 BSR-140 i2-BUS audio 190.115.0 25 BSR-140 i2-BUS audio 190.115.0 47 BSR-200 i2-BUS audio 190.113.0 25 BSR-200 i2-BUS audio 190.113.0 47 BSV-100 i2-BUS audio 170.411.0 25 BSV-200 6D video 170.412.0 27 BSV-500 2D video 170.415.0 45 BTA-230 SI Spare part 270.001.0 127 BTA-230 WS Spare part 270.004.0 127 BTC-200 6D video 181.620.0 23 BTC-500 2D video 181.650.0 43 BTE-116 universal 170.311.6 24 BTE-116 universal 170.311.6 45 BTI-200 i2-BUS audio 190.142.0 31 BTI-200 i2-BUS audio 190.142.0 47 BTI-200 1+n audio 190.142.0 74 BTI-256 Spare part 190.140.0 126 BTV-230 SI Spare part 280.001.0 127 BTV-230 WS Spare part 280.004.0 127 BVC-280 6D video 182.280.5 33 BVF-200 6D video 183.200.0 18 BVF-230/E Spare part 183.232.0 126 BVF-260/BE 6D video 183.260.0 16 BVF-260/BE 6D video 183.260.0 16 BVF-260/E-BR for BVF-2/560 183.262.4 17 BVF-260/E-BR for BVF-2/560 183.262.4 39 BVF-260/E-GN for BVF-2/560 183.262.5 17 BVF-260/E-GN for BVF-2/560 183.262.5 39 BVF-260/E-GR for BVF-2/560 183.262.6 17 BVF-260/E-GR for BVF-2/560 183.262.6 39 BVF-260/E-SW for BVF-2/560 183.262.2 17

BVF-260/E-SW for BVF-2/560 183.262.2 39 BVF-260/E-WS for BVF-2/560 183.262.3 17 BVF-260/E-WS for BVF-2/560 183.262.3 39 BVF-260/G-SW for BVF-2/560 183.266.2 17 BVF-260/G-SW for BVF-2/560 183.266.2 39 BVF-260/G-WS for BVF-2/560 183.266.3 17 BVF-260/G-WS for BVF-2/560 183.266.3 39 BVF-260/R-BR for BVF-2/560 183.264.4 17 BVF-260/R-BR for BVF-2/560 183.264.4 39 BVF-260/R-GN for BVF-2/560 183.264.5 17 BVF-260/R-GN for BVF-2/560 183.264.5 39 BVF-260/R-GR for BVF-2/560 183.264.6 17 BVF-260/R-GR for BVF-2/560 183.264.6 39 BVF-260/R-SW for BVF-2/560 183.264.2 17 BVF-260/R-SW for BVF-2/560 183.264.2 39 BVF-260/R-WS for BVF-2/560 183.264.3 17 BVF-260/R-WS for BVF-2/560 183.264.3 39 BVF-500 2D video 183.500.0 40 BVF-560/BE 2D video 183.560.0 38 BVF-560/BE 2D video 183.560.0 39 BVF-APG-SI for BVF-2/560 183.261.1 16 BVF-APG-SI for BVF-2/560 183.261.1 38 BVF-APG-SW for BVF-2/560 183.261.2 16 BVF-APG-SW for BVF-2/560 183.261.2 38 BVF-UPK-UNI for BVF-2/560 300.090.1 17 BVF-UPK-UNI for BVF-2/560 300.090.1 39 BVM-100 Spare part 182.100.0 126 BVM-280 6D video 182.280.0 20 BVS-200 6D video 190.312.0 75 BVU-100 6D video 180.410.0 27 BVV-203 6D video 180.620.3 27 BVV-206 6D video 180.620.6 27 BVV-223 6D video 180.622.3 27 BVV-501 2D video 180.650.1 45 BVV-502 2D video 180.650.2 45 BVV-504 2D video 180.650.4 45 BVV-521 2D video 180.652.1 45 BVV-522 2D video 180.652.2 45 BVV-524 2D video 180.652.4 45

CAE-200 Code-Lock 100.241.1 79 CBL-300 IP system 151.302.0 73 CBM-300 IP system 581.337.0 71 CBS-300 IP system 151.301.0 73 CCS-200 6D video 181.420.0 22 CCS-200 Spare part 181.420.0 127 CCS-210 6D video 181.421.0 22 CCS-210 Spare part 181.421.0 127 CCS-500 2D video 181.450.0 42 CCS-510 2D video 181.451.0 42 CCV-402 Spare part 231.300.2 124 CLE-200 Code-Lock 150.600.4 79 CLM-200 Modesta 581.060.0 87 CUE-200 Code-Lock 100.221.1 79 CZM-110 Modesta 581.012.1 86 CZM-120 Modesta 581.012.2 86 CZM-130 Modesta 581.012.3 86 CZM-140 Modesta 581.012.4 86 CZM-210 Modesta 581.012.5 86

DBM-300 IP system 581.356.0 72 DCI-256 i2-BUS audio 150.715.0 32 DCM-256 i2-BUS audio 581.256.0 32 DCM-256 Modesta 581.256.0 87 DLM-256 i2-BUS audio 581.257.0 32 DLM-256 Modesta 581.257.0 87

EAP-1/1 Esta 329.211.1 109 EAP-2/2 Esta 329.212.2 109 EAP-x/x Esta 329.219.9 109 EAT-1/1 Esta 328.211.1 109 EAT-2/2 Esta 328.212.2 109 EAT-x/x Esta 328.219.9 109 ECM-200 Modesta 581.232.0 88 ELA-100 i2-BUS audio 170.212.0 24 ELA-302 Spare part 120.331.0 125 ELA-402 1+n system 120.431.0 51 ELA-402 ERG Spare part 120.431.3 125 EMP-1/1 Esta 324.220.1 110

A B

C

D

E

Item System Item no. Page Item System Item no. Page Item System Item no. Page

131

Serv

ices


EMP-2/1 Esta 324.220.2 110 EMP-x/x Esta 324.229.9 110 EMT-1/1 Esta 324.210.1 111 EMT-2/1 Esta 324.210.2 111 EMT-x/x Esta 324.219.9 111 ERG-402 1+n system 120.102.4 51 ESK-252 AEA Spare part 150.400.5 128 ESK-252 AEC Spare part 150.400.3 128 ESK-252 AEE Spare part 150.314.1 128 ESK-252 AEM Spare part 150.400.2 128 ESK-252 ALB Spare part 150.400.1 128 ESP-1/1 Esta 321.211.1 113 ESP-2/2 Esta 321.212.2 113 ESP-x/x Esta 321.219.9 113 EST-1/1 Esta 320.211.1 113 EST-2/2 Esta 320.212.2 113 EST-x/x Esta 320.219.9 113 EUP-1/1 Esta 323.211.1 108 EUP-2/2 Esta 323.212.2 108 EUP-x/x Esta 323.219.9 108 EUT-1/1 Esta 322.211.1 108 EUT-2/2 Esta 322.212.2 108 EUT-x/x Esta 322.219.9 108 EZP-1/1 Esta 327.211.1 112 EZP-2/2 Esta 327.212.2 112 EZP-x/x Esta 327.219.9 112 EZT-1/1 Esta 326.211.1 112 EZT-2/2 Esta 326.212.2 112 EZT-x/x Esta 326.219.9 112

FLM-111 Modesta 581.595.1 89 FLM-112 Modesta 581.595.2 89 FLM-113 Modesta 581.595.3 89 FMA-1/1EM Modesta 402.118.1 92 FMA-2/1EM Modesta 402.218.1 92 FMA-3/1EM Modesta 402.318.1 92 FMA-4/1EM Modesta 402.418.1 92 FMA-4/2EM Modesta 402.428.1 92 FMA-6/2EM Modesta 402.628.1 92 FMA-9/3EM Modesta 402.938.1 92 FMU-1/1AP Modesta 401.115.1 93 FMU-1/1EM Modesta 401.118.1 93 FMU-2/1AP Modesta 401.215.1 93 FMU-2/1EM Modesta 401.218.1 93 FMU-3/1AP Modesta 401.315.1 93 FMU-3/1EM Modesta 401.318.1 93 FMU-4/1AP Modesta 401.415.1 93 FMU-4/1EM Modesta 401.418.1 93 FMU-4/2AP Modesta 401.425.1 93 FMU-4/2EM Modesta 401.428.1 93 FMU-6/2AP Modesta 401.625.1 93 FMU-6/2EM Modesta 401.628.1 93 FMU-9/3AP Modesta 401.935.1 93 FMU-9/3EM Modesta 401.938.1 93 FPE-200 Fingerprint 150.632.0 80 FPM-200 Fingerprint 581.092.0 80 FPM-200 Modesta 581.092.0 87

GPM Spare part 150.328.1 128 GZM-110 Modesta 581.017.1 86 GZM-120 Modesta 581.017.2 86 GZM-130 Modesta 581.017.3 86 GZM-140 Modesta 581.017.4 86 GZM-210 Modesta 581.017.5 86 GZM-engr. Modesta 880.020.5 89 GZM-engr. Modesta 880.020.6 89

HAT-402 1+n system 130.810.0 50 HDM-100 Modesta 581.030.0 88 HNM-110 Modesta 581.025.1 88 HNM-120 Modesta 581.025.2 88 HT-802 Spare part 130.860.8 124 HT-BVM-100 Spare part 08.500.101 126 HT-Universal2 Spare part 130.881.0 124 HT-VMO-802 Spare part 08.500.100 124

IKS-100 Spare part 150.470.2 129 IKS-110 Spare part 150.471.2 129

IKS-200/210 Spare part 150.479.9 129

KAE-200 Keypass 100.641.1 78 KAP-1/1 Stabila 570.121.0 120 KAP-10/1 Stabila 571.021.0 120 KAP-10/2 Stabila 571.021.1 120 KAP-11/1 Stabila 571.121.0 120 KAP-12/1 Stabila 571.221.0 120 KAP-12/2 Stabila 571.221.1 120 KAP-2/1 Stabila 570.221.0 120 KAP-3/1 Stabila 570.321.0 120 KAP-4/1 Stabila 570.421.0 120 KAP-5/1 Stabila 570.521.0 120 KAP-6/1 Stabila 570.621.0 120 KAP-6/2 Stabila 570.621.1 120 KAP-7/1 Stabila 570.721.0 120 KAP-8/1 Stabila 570.821.0 120 KAP-8/2 Stabila 570.821.1 120 KAP-9/1 Stabila 570.921.0 120 Key 2L Spare part 033.001.0 129 Key INB1.5 Spare part 033.000.9 129 Key INB2.5 Spare part 033.000.8 129 Key WINX Spare part 033.000.2 129 Key ZY Spare part 033.000.1 129 KPA-003 Keypass 150.622.3 78 KPA-010 Keypass 150.622.1 78 KPC-003 Keypass 150.621.3 78 KPC-010 Keypass 150.621.1 78 KPM-200 Modesta 581.070.0 87 KPM-900 Modesta 581.079.0 87 KPR-200 Keypass 150.620.0 78 KPS- 8/2 Spare part 991.008.S 124 KPS button Spare part 150.217.0 129 KPS cover Spare part 150.213.4 129 KPS-10/2 Spare part 991.010.S 124 KPS-12/2 Spare part 991.012.S 124 KSM-100 Modesta 581.080.0 87 KUE-200 Keypass 100.621.1 78 KUP-1/1 Stabila 560.121.0 120 KUP-10/1 Stabila 561.021.0 120 KUP-10/2 Stabila 561.021.1 120 KUP-11/1 Stabila 561.121.0 120 KUP-12/1 Stabila 561.221.0 120 KUP-12/2 Stabila 561.221.1 120 KUP-2/1 Stabila 560.221.0 120 KUP-3/1 Stabila 560.321.0 120 KUP-4/1 Stabila 560.421.0 120 KUP-5/1 Stabila 560.521.0 120 KUP-6/1 Stabila 560.621.0 120 KUP-6/2 Stabila 560.621.1 120 KUP-7/1 Stabila 560.721.0 120 KUP-8/1 Stabila 560.821.0 120 KUP-8/2 Stabila 560.821.1 120 KUP-9/1 Stabila 560.921.0 120 KVM-1/1 Esta 520.128.0 104 KVM-10/1 Esta 521.028.0 104 KVM-10/2 Esta 521.028.1 104 KVM-11/1 Esta 521.128.0 104 KVM-12/1 Esta 521.228.0 104 KVM-12/2 Esta 521.228.1 104 KVM-2/1 Esta 520.228.0 104 KVM-3/1 Esta 520.328.0 104 KVM-4/1 Esta 520.428.0 104 KVM-5/1 Esta 520.528.0 104 KVM-6/1 Esta 520.628.0 104 KVM-6/2 Esta 520.628.1 104 KVM-7/1 Esta 520.728.0 104 KVM-8/1 Esta 520.828.0 104 KVM-8/2 Esta 520.828.1 104 KVM-9/1 Esta 520.928.0 104

LBM-300 IP system 581.301.0 70 LED 120mm Spare part 150.511.5 127 LED 120mm Spare part 150.519.5 127 LED 180mm Spare part 150.511.6 127 LED 180mm Spare part 150.519.6 127 LED 225mm Spare part 150.511.7 127 LED 225mm Spare part 150.519.7 127 LED 280mm Spare part 150.511.8 127 LED 280mm Spare part 150.519.8 127

LED 550mm Spare part 150.511.9 127 LED 550mm Spare part 150.519.9 127 LED 60mm Spare part 150.511.4 127 LED 60mm Spare part 150.519.4 127 LED 80mm Spare part 150.511.3 127 LED 80mm Spare part 150.519.3 127 LED-SPM-110 Spare part 150.518.1 127 LED-SPM-120 Spare part 150.518.2 127 LED-SPM-130 Spare part 150.518.3 127 LED-SPM-140 Spare part 150.518.4 127 LIM-100 Modesta 581.024.0 88 LIM-engr. Modesta 880.020.3 89 LKM-110 Modesta 581.206.0 87 LLM-115 Modesta 581.595.0 88 LOM-110 Modesta 581.205.0 87 LQM-110 Modesta 581.204.0 87 LRM-110 Modesta 581.201.0 87 LT-101 Spare part 150.316.1 128 LT-102 Spare part 150.316.2 128 LT-103 Spare part 150.316.3 128 LT-104 Spare part 150.316.4 128 LTM-110 Modesta 581.202.0 87

MBM-300 IP system 581.310.0 72 MO-VMO/BVM Spare part 08.500.006 124 MO-VMO/BVM Spare part 08.500.006 126

NGV-500 2D video 231.415.0 45 NGV-860 6D video 231.410.6 27 NSG-200 i2-BUS audio 170.152.0 19 NSG-802 1+n system 130.901.0 50 NTR-812 universal 120.100.4 25 NTR-812 universal 120.100.4 45 NTR-812 universal 120.100.4 51

RMG-10 BW Spare part 140.010.0 125 RMS-10 BW Spare part 140.011.0 125 RMS-10HS 1+n system 140.021.0 51 RMS-4 BW Spare part 140.001.4 125 RMS-4HS 1+n system 140.020.4 51 RMS-6 BW Spare part 140.001.6 125 RMS-6HS 1+n system 140.020.6 51 RSR-200 i2-BUS audio 190.180.0 25 RSR-220 for BVF-200 190.182.0 27 RSR-402 1+n system 140.004.0 51 RSR-500 2D video 190.185.0 45 RSR-500 2D video 190.185.0 47

Screw 2L-LI Spare part 033.004.9 129 Screw 2L-LI Spare part 033.004.6 129 Screw 2L-ZY Spare part 033.005.3 129 Screw 2L-ZY Spare part 033.005.6 129 Screw M2,5 Spare part 033.002.9 129 Screw M4 Spare part 033.003.4 129 Screw S-ZY12 Spare part 033.007.0 129 Screw S-ZY22 Spare part 033.006.0 129 Screw S-ZY22 Spare part 033.006.1 129 Screw S-ZY22 Spare part 033.006.2 129 Screw S-ZY22 Spare part 033.006.3 129 Screw S-ZY42 Spare part 033.008.0 129 Screw UNC Spare part 033.000.7 129 SGR-210 Spare part 120.021.0 127 SMB-4/2EM Modesta 492.428.0 91 SMB-6/2EM Modesta 492.628.0 91 SMB-x/xEM Modesta 492.998.0 91 SMF-4/2EM Modesta 493.428.0 91 SMF-6/2EM Modesta 493.628.0 91 SMF-x/xEM Modesta 493.998.0 91 SMT-1/1EM Modesta 482.118.0 90 SMT-2/1EM Modesta 482.218.0 90 SMT-3/1EM Modesta 482.318.0 90 SMT-4/1EM Modesta 482.418.0 90 SMT-4/2EM Modesta 482.428.0 90 SMT-6/2EM Modesta 482.628.0 90 SMT-x/xEM Modesta 482.998.0 90 SR-12 Spare part 140.003.0 125 STM-100 Modesta 581.011.1 88 SZM-110 Modesta 581.013.1 86

F

G

H

I

K

M

N

R


S

L

132


SZM-120 Modesta 581.013.2 86 SZM-130 Modesta 581.013.3 86 SZM-140 Modesta 581.013.4 86

TAP-1/1 EV1 Stabila 540.171.0 118 TAP-1/1 R9 Stabila 540.174.0 118 TAP-1/1 RnA Stabila 540.179.0 118 TAP-10/1 EV1 Stabila 541.071.0 118 TAP-10/1 R9 Stabila 541.074.0 118 TAP-10/1 RnA Stabila 541.079.0 118 TAP-10/2 EV1 Stabila 541.071.1 118 TAP-10/2 R9 Stabila 541.074.1 118 TAP-10/2 RnA Stabila 541.079.1 118 TAP-11/1 EV1 Stabila 541.171.0 118 TAP-11/1 R9 Stabila 541.174.0 118 TAP-11/1 RnA Stabila 541.179.0 118 TAP-12/1 EV1 Stabila 541.271.0 118 TAP-12/1 R9 Stabila 541.274.0 118 TAP-12/1 RnA Stabila 541.279.0 118 TAP-12/2 EV1 Stabila 541.271.1 118 TAP-12/2 R9 Stabila 541.274.1 118 TAP-12/2 RnA Stabila 541.279.1 118 TAP-12/3 EV1 Stabila 541.271.2 118 TAP-12/3 R9 Stabila 541.274.2 118 TAP-12/3 RnA Stabila 541.279.2 118 TAP-14/2 EV1 Stabila 541.471.1 118 TAP-14/2 R9 Stabila 541.474.1 118 TAP-14/2 RnA Stabila 541.479.1 118 TAP-15/3 EV1 Stabila 541.571.2 118 TAP-15/3 R9 Stabila 541.574.2 118 TAP-15/3 RnA Stabila 541.579.2 118 TAP-16/2 EV1 Stabila 541.671.1 118 TAP-16/2 R9 Stabila 541.674.1 118 TAP-16/2 RnA Stabila 541.679.1 118 TAP-18/2 EV1 Stabila 541.871.1 118 TAP-18/2 R9 Stabila 541.874.1 118 TAP-18/2 RnA Stabila 541.879.1 118 TAP-18/3 EV1 Stabila 541.871.2 118 TAP-18/3 R9 Stabila 541.874.2 118 TAP-18/3 RnA Stabila 541.879.2 118 TAP-2/1 EV1 Stabila 540.271.0 118 TAP-2/1 R9 Stabila 540.274.0 118 TAP-2/1 RnA Stabila 540.279.0 118 TAP-3/1 EV1 Stabila 540.371.0 118 TAP-3/1 R9 Stabila 540.374.0 118 TAP-3/1 RnA Stabila 540.379.0 118 TAP-4/1 EV1 Stabila 540.471.0 118 TAP-4/1 R9 Stabila 540.474.0 118 TAP-4/1 RnA Stabila 540.479.0 118 TAP-4/2 EV1 Stabila 540.471.1 118 TAP-4/2 R9 Stabila 540.474.1 118 TAP-4/2 RnA Stabila 540.479.1 118 TAP-5/1 EV1 Stabila 540.571.0 118 TAP-5/1 R9 Stabila 540.574.0 118 TAP-5/1 RnA Stabila 540.579.0 118 TAP-6/1 EV1 Stabila 540.671.0 118 TAP-6/1 R9 Stabila 540.674.0 118 TAP-6/1 RnA Stabila 540.679.0 118 TAP-6/2 EV1 Stabila 540.671.1 118 TAP-6/2 R9 Stabila 540.674.1 118 TAP-6/2 RnA Stabila 540.679.1 118 TAP-7/1 EV1 Stabila 540.771.0 118 TAP-7/1 R9 Stabila 540.774.0 118 TAP-7/1 RnA Stabila 540.779.0 118 TAP-8/1 EV1 Stabila 540.871.0 118 TAP-8/1 R9 Stabila 540.874.0 118 TAP-8/1 RnA Stabila 540.879.0 118 TAP-8/2 EV1 Stabila 540.871.1 118 TAP-8/2 R9 Stabila 540.874.1 118 TAP-8/2 RnA Stabila 540.879.1 118 TAP-9/1 EV1 Stabila 540.971.0 118 TAP-9/1 R9 Stabila 540.974.0 118 TAP-9/1 RnA Stabila 540.979.0 118 TAP-9/3 EV1 Stabila 540.971.2 118 TAP-9/3 R9 Stabila 540.974.2 118 TAP-9/3 RnA Stabila 540.979.2 118 TBM-300 IP system 581.360.0 72 TCM-200 Modesta 581.235.0 88 TCM-500 Modesta 581.234.0 88 TDM-HS Spare part 120.106.0 125 TKA-UNI for audio int. 130.120.0 19

TKA-UNI for audio int. 130.120.0 21 TKA-UNI for audio int. 130.120.0 41 TKA-UNI for audio int. 130.120.0 50 TKV-200 for BVF-2/500 230.120.0 18 TKV-200 for BVF-2/500 230.120.0 40 TKV-260 for BVF-2/560 230.126.0 16 TKV-260 for BVF-2/560 230.126.0 38 TKV-280 for BVM-280 230.128.0 20 TLA-402 Spare part 120.411.0 125 TLA-402 ERG Spare part 120.411.3 125 TMD Abdeck. Spare part 150.217.4 129 TMD Taster Spare part 150.213.2 129 TMG- 4/2 Esta 110.489.1 107 TMG- 6/2 Esta 110.689.1 107 TMG- 8/2 Esta 110.889.1 107 TMG- 9/3 Esta 110.989.2 107 TMG-1/1 Esta 110.189.0 107 TMG-10/1 Esta 111.089.0 107 TMG-10/2 Esta 111.089.1 107 TMG-11/1 Esta 111.189.0 107 TMG-12/1 Esta 111.289.0 107 TMG-12/2 Esta 111.289.1 107 TMG-12/3 Esta 111.289.2 107 TMG-14/2 Esta 111.489.1 107 TMG-15/3 Esta 111.589.2 107 TMG-16/2 Esta 111.689.1 107 TMG-18/2 Esta 111.889.1 107 TMG-18/3 Esta 111.889.2 107 TMG-2/1 Esta 110.289.0 107 TMG-3/1 Esta 110.389.0 107 TMG-4/1 Esta 110.489.0 107 TMG-5/1 Esta 110.589.0 107 TMG-6/1 Esta 110.689.0 107 TMG-7/1 Esta 110.789.0 107 TMG-8/1 Esta 110.889.0 107 TMG-9/1 Esta 110.989.0 107 TUE-10/1 Stabila 550.910.0 119 TUE-10/2 Stabila 550.810.1 119 TUE-12/1 Stabila 551.112.0 119 TUE-12/3 Stabila 550.912.2 119 TUE-14/2 Stabila 551.214.1 119 TUE-18/2 Stabila 551.618.1 119 TUE-18/3 Stabila 551.518.2 119 TUE-2/1 Stabila 550.102.0 119 TUE-4/1 Stabila 550.304.0 119 TUE-6/1 Stabila 550.506.0 119 TUE-6/2 Stabila 550.406.1 119 TUE-8/1 Stabila 550.708.0 119 TUP-1/1 EV1 Stabila 530.151.0 117 TUP-1/1 R9 Stabila 530.154.0 117 TUP-1/1 RnA Stabila 530.159.0 117 TUP-10/1 EV1 Stabila 531.051.0 117 TUP-10/1 R9 Stabila 531.054.0 117 TUP-10/1 RnA Stabila 531.059.0 117 TUP-10/2 EV1 Stabila 531.051.1 117 TUP-10/2 R9 Stabila 531.054.1 117 TUP-10/2 RnA Stabila 531.059.1 117 TUP-11/1 EV1 Stabila 531.151.0 117 TUP-11/1 R9 Stabila 531.154.0 117 TUP-11/1 RnA Stabila 531.159.0 117 TUP-12/1 EV1 Stabila 531.251.0 117 TUP-12/1 R9 Stabila 531.254.0 117 TUP-12/1 RnA Stabila 531.259.0 117 TUP-12/2 EV1 Stabila 531.251.1 117 TUP-12/2 R9 Stabila 531.254.1 117 TUP-12/2 RnA Stabila 531.259.1 117 TUP-12/3 EV1 Stabila 531.251.2 117 TUP-12/3 R9 Stabila 531.254.2 117 TUP-12/3 RnA Stabila 531.259.2 117 TUP-14/2 EV1 Stabila 531.451.1 117 TUP-14/2 R9 Stabila 531.454.1 117 TUP-14/2 RnA Stabila 531.459.1 117 TUP-15/3 EV1 Stabila 531.551.2 117 TUP-15/3 R9 Stabila 531.554.2 117 TUP-15/3 RnA Stabila 531.559.2 117 TUP-16/2 EV1 Stabila 531.651.1 117 TUP-16/2 R9 Stabila 531.654.1 117 TUP-16/2 RnA Stabila 531.659.1 117 TUP-18/2 EV1 Stabila 531.851.1 117 TUP-18/2 R9 Stabila 531.854.1 117 TUP-18/2 RnA Stabila 531.859.1 117 TUP-18/3 EV1 Stabila 531.851.2 117

TUP-18/3 R9 Stabila 531.854.2 117 TUP-18/3 RnA Stabila 531.859.2 117 TUP-2/1 EV1 Stabila 530.251.0 117 TUP-2/1 R9 Stabila 530.254.0 117 TUP-2/1 RnA Stabila 530.259.0 117 TUP-3/1 EV1 Stabila 530.351.0 117 TUP-3/1 R9 Stabila 530.354.0 117 TUP-3/1 RnA Stabila 530.359.0 117 TUP-4/1 EV1 Stabila 530.451.0 117 TUP-4/1 R9 Stabila 530.454.0 117 TUP-4/1 RnA Stabila 530.459.0 117 TUP-4/2 EV1 Stabila 530.451.1 117 TUP-4/2 R9 Stabila 530.454.1 117 TUP-4/2 RnA Stabila 530.459.1 117 TUP-5/1 EV1 Stabila 530.551.0 117 TUP-5/1 R9 Stabila 530.554.0 117 TUP-5/1 RnA Stabila 530.559.0 117 TUP-6/1 EV1 Stabila 530.651.0 117 TUP-6/1 R9 Stabila 530.654.0 117 TUP-6/1 RnA Stabila 530.659.0 117 TUP-6/2 EV1 Stabila 530.651.1 117 TUP-6/2 R9 Stabila 530.654.1 117 TUP-6/2 RnA Stabila 530.659.1 117 TUP-7/1 EV1 Stabila 530.751.0 117 TUP-7/1 R9 Stabila 530.754.0 117 TUP-7/1 RnA Stabila 530.759.0 117 TUP-8/1 EV1 Stabila 530.851.0 117 TUP-8/1 R9 Stabila 530.854.0 117 TUP-8/1 RnA Stabila 530.859.0 117 TUP-8/2 EV1 Stabila 530.851.1 117 TUP-8/2 R9 Stabila 530.854.1 117 TUP-8/2 RnA Stabila 530.859.1 117 TUP-9/1 EV1 Stabila 530.951.0 117 TUP-9/1 R9 Stabila 530.954.0 117 TUP-9/1 RnA Stabila 530.959.0 117 TUP-9/3 EV1 Stabila 530.951.2 117 TUP-9/3 R9 Stabila 530.954.2 117 TUP-9/3 RnA Stabila 530.959.2 117 TVG-1/1 Esta 110.118.0 106 TVG-10/1 Esta 111.018.0 106 TVG-10/2 Esta 111.018.1 106 TVG-11/1 Esta 111.118.0 106 TVG-12/1 Esta 111.218.0 106 TVG-12/2 Esta 111.218.1 106 TVG-12/3 Esta 111.218.2 106 TVG-14/2 Esta 111.418.1 106 TVG-15/3 Esta 111.518.2 106 TVG-16/2 Esta 111.618.1 106 TVG-18/2 Esta 111.818.1 106 TVG-18/3 Esta 111.818.2 106 TVG-2/1 Esta 110.218.0 106 TVG-3/1 Esta 110.318.0 106 TVG-4/1 Esta 110.418.0 106 TVG-4/2 Esta 110.418.1 106 TVG-5/1 Esta 110.518.0 106 TVG-6/1 Esta 110.618.0 106 TVG-6/2 Esta 110.618.1 106 TVG-7/1 Esta 110.718.0 106 TVG-8/1 Esta 110.818.0 106 TVG-8/2 Esta 110.818.1 106 TVG-9/1 Esta 110.918.0 106 TVG-9/3 Esta 110.918.2 106 TVM-1/1 Esta 510.118.0 103 TVM-10/1 Esta 511.018.0 103 TVM-10/2 Esta 511.018.1 103 TVM-11/1 Esta 511.118.0 103 TVM-12/1 Esta 511.218.0 103 TVM-12/2 Esta 511.218.1 103 TVM-12/3 Esta 511.218.2 103 TVM-14/2 Esta 511.418.1 103 TVM-15/3 Esta 511.518.2 103 TVM-16/2 Esta 511.618.1 103 TVM-18/2 Esta 511.818.1 103 TVM-18/3 Esta 511.818.2 103 TVM-2/1 Esta 510.218.0 103 TVM-3/1 Esta 510.318.0 103 TVM-4/1 Esta 510.418.0 103 TVM-4/2 Esta 510.418.1 103 TVM-5/1 Esta 510.518.0 103 TVM-6/1 Esta 510.618.0 103 TVM-6/2 Esta 510.618.1 103 TVM-7/1 Esta 510.718.0 103

T


133

Serv

ices


TVM-8/1 Esta 510.818.0 103 TVM-8/2 Esta 510.818.1 103 TVM-9/1 Esta 510.918.0 103 TVM-9/3 Esta 510.918.2 103 TVO-1/1 Winx 500.118.0 99 TVO-10/1 Winx 501.018.0 99 TVO-10/2 Winx 501.018.1 99 TVO-11/1 Winx 501.118.0 99 TVO-12/1 Winx 501.218.0 99 TVO-12/2 Winx 501.218.1 99 TVO-12/3 Winx 501.218.2 99 TVO-14/2 Winx 501.418.1 99 TVO-15/3 Winx 501.518.2 99 TVO-16/2 Winx 501.618.1 99 TVO-18/2 Winx 501.818.1 99 TVO-18/3 Winx 501.818.2 99 TVO-2/1 Winx 500.218.0 99 TVO-3/1 Winx 500.318.0 99 TVO-4/1 Winx 500.418.0 99 TVO-4/2 Winx 500.418.1 99 TVO-5/1 Winx 500.518.0 99 TVO-6/1 Winx 500.618.0 99 TVO-6/2 Winx 500.618.1 99 TVO-7/1 Winx 500.718.0 99 TVO-8/1 Winx 500.818.0 99 TVO-8/2 Winx 500.818.1 99 TVO-9/1 Winx 500.918.0 99 TVO-9/3 Winx 500.918.2 99

USG-2 BW Spare part 140.005.6 125 USG-2 HS Spare part 140.005.5 125 USG-200 A Spare part 140.006.0 125 USG-200 B Spare part 140.006.1 125

VCA-1EM 6D video set 106.461.8 55 VCA-2EM 6D video set 106.462.8 55 VCZ-1EM 6D video set 106.361.8 54 VCZ-2EM 6D video set 106.362.8 54 VFA-1EM 6D video set 108.461.8 57 VFA-2EM 6D video set 108.462.8 57 VFZ-1EM 6D video set 108.161.8 56 VFZ-2EM 6D video set 108.162.8 56 VKG-200/BEC 6D video kit 100.134.1 64 VKG-200/BTC 6D video kit 100.131.1 64 VKG-200/CCS 6D video kit 100.133.1 64 VKG-500/BTC 2D video kit 100.151.1 65 VKG-500/CCS 2D video kit 100.153.1 65 VSU-100 6D video 231.620.0 27 VSU-110 6D video 231.621.0 27 VUG-220 A Spare part 231.614.0 125 VUG-220 B Spare part 231.614.1 125 VVE-103 Spare part 231.610.3 125 VVE-105 Spare part 231.610.5 125

ZRT-100 BW Spare part 120.103.3 125 ZRT-100HS Spare part 120.103.2 125

U

V

Item System Item no. Page

Z

134

General terms and conditionsI. General information1. Supplies, services and offerings from ELCOM shall be offered only

subject to these General Terms and Conditions (GTC). No other conditions shall apply even if ELCOM delivers the product without specific reservations.

2. These GTC also apply to future transactions with customer, even if ELCOM has not specifically referred to the applicability of these General Terms and Conditions. Any deviations from these terms shall require the written confirmation of ELCOM to be valid.

II. Conclusion of contract1. Offers by ELCOM, unless otherwise specified in writing, are subject

to change and non-binding.2. The customer's order is binding for 14 days. The contract is con-

cluded once ELCOM has confirmed acceptance in writing within that period or makes the delivery.

3. ELCOM retains ownership and copyright on all documentation provided to the customer in the context of the offer and order place-ment, such as calculations, drawings, etc. These documents may not be disclosed to third parties unless ELCOM has given the customer explicit written permission to do so.

4. The installation and commissioning of our products always assumes the qualified expertise of an electrician. The customer is undertakes to sell our products exclusively to specialised tradesmen/installers.

III. Prices1. ELCOM prices are considered ex factory (pursuant to INCOTERMS

2000), including VAT in the legally applicable amount.2. Orders valued 250 Euros or more shall be delivered without freight

charges. Orders valued 500 Euros or more shall be delivered without freight or packaging charges.

3. If salary, material or shared costs should rise before the day of delivery, ELCOM is entitled to adjust the prices accordingly.

IV. Delivery times1. The delivery time specified by ELCOM is non-binding unless other-

wise agreed in writing. If a binding delivery time has been agreed upon, the agreed delivery time shall be extended accordingly in case of unforeseen, extraordinary and unavoidable events, particularly in case of strikes of any kind or if deliveries to us are delayed, even if these events only occur during an existing delay.

2. Also, in case of a binding delivery time, ELCOM is entitled to exercise partial delivery and early deliveries.

3. In the case of a delivery delay that is ELCOM's responsibility, the customer is obligated to provide ELCOM with a reasonable grace period. If the customer sets ELCOM a grace period appropriate to the circumstances in the case of a delivery delay, and ELCOM fails to meet this grace period for reasons that are ELCOM's responsibility, the customer is entitled to withdraw from the contract in writing; damage claims will be due only in the case of deliberate damage or gross negligence.

4. Otherwise, the liability for damage compensation is limited to the value of the delivery.

V. Delivery/transfer of risk1. Delivered items, even if they exhibit significant defects, must be

accepted by the customer without prejudice to warranty rights. According to §377 HGB, defects must be claimed within 6 working days. This claim must be made to ELCOM in writing. The receipt of the claim by ELCOM is the determining factor for compliance with the notification period. The customer must demonstrate compliance with the defect notification period; partial deliveries are permitted. Risk is transferred from the ELCOM Neckarsulm or Muldestausee plant (according to INCOTERMS 2000) to the customer when free delivery has been acknowledged. Upon the customer's request, the delivery may be insured at customer's cost against theft, breakage, transport, fire and water damage.

2. If the customer culpably violates his or her contractual support obligations or if acceptance is delayed, the risk of accidental de-struction or accidental degradation of the object of the agreement is transferred to the customer at the time he or she has delayed acceptance.

3. Transport and all other packaging shall only be accepted if returned free of freight charges to ELCOM's Neckarsulm or Muldestausee plants.

VI. Delay in acceptance1. In the case of a default of acceptance by the customer, in the case

that cost increases arise – for whatever reason, particularly due to tariff accords that apply to the product – ELCOM is entitled to adapt the originally agreed-upon price to these new conditions.

2. The customer shall bear all costs incurred by ELCOM as a result of default of acceptance, including any resulting damage claims against ELCOM.

VII. Payment1. ELCOM invoices are payable within 10 days at a 3% discount or

within 30 days from the billing date with no deductions and exempt from charges. After this period has expired, the customer is in payment delay, with no additional notice required. During the delay period, the customer must pay interested on the amount owed at a rate of 8% over the base interest rate. The right to demonstrate higher damages from delay and require compensation is reserved. Any discount shall apply only to the net value of the goods, not to freight or packaging.

2. The customer shall have rights of set-off only if his or her counterclaims are legally established, remain uncontested or are acknowledged by ELCOM. The customer may only exercise a right to withhold payment if the counterclaim stems from the same contractual relationship.

3. If the customer fails to comply with payment deadlines, or if circumstances are known that reduce the creditworthiness of the customer, ELCOM retains the right to make deliveries only against payment in advance and/or to require a security payment.

5. If a justified prima facie interest is established, the customer must provide ELCOM with all information required to exercise ELCOM's rights against the customer, and must provide all required docu-mentation. Until retracted, the customer is authorised to collect the transferred proceeds of the resale. If there is an important reason for the customer to be unable to pay, especially including delay in payment, failure to pay, commencement of an insolvency process of any nature, act of protest of a bill or if comparably justified reasons exist, ELCOM is entitled to withdraw authorisation of the customer to demand payment. Moreover, after prior threat to disclose the as-signment for security and/or recovery of the transferred obligations, and after a reasonable period, ELCOM can disclose assignments for security, recover the transferred obligations, or require disclosure of assignments for security made by the customer against their own customers.

6. The customer is entitled to process or reshape the retained goods, combine them with other objects and/or mix them inseparably. The processing, reforming, combination or mixture shall be done for ELCOM. The customer shall treat the objects with all due care. The processed, reshaped, combined or mixed object shall be considered retained goods.

7. In the case of processing, reshaping, combination or mixture with other objects not belonging to ELCOM, ELCOM shall receive partial ownership of the new object in the proportion of the share resulting from the ratio of the value of the processed, reshaped, combined or mixed retained goods to the value of the remaining processed goods at the time of processing, reshaping, combination or mixture. If the customer receives general ownership of the object, ELCOM and the customer hereby agree that the customer transfers to ELCOM part ownership to the new object resulting from the processing, reshaping, combination or mixture in the ratio of the proportion of the share resulting from the ratio of the value of the processed, reshaped, combined or mixed retained goods to the value of the remaining processed goods at the time of processing, reshaping, combination or mixture. If the new object is resold, the customer hereby transfers to ELCOM his or her own claim from the resale against his or her own customers in security, along with all auxiliary rights, without this requiring additional specific declaration. However, this transfer applies only to the amount corresponding to the value invoiced by ELCOM for the processed, reshaped, combined or mixed retained goods. The payment share transferred to ELCOM must be satisfied with first priority. With respect to collection authorisation and the conditions of its retraction, the terms above apply.

8. If the retained goods are combined by the customer with real estate or moveable objects, the customer hereby also transfers to ELCOM any claim to payment due him or her as payment for the combina-tion as security, including all auxiliary claims, without requiring additional specific declaration, in the amount of the proportion of the value of the combined retained goods to the remainder of the combined goods, at the time of their combination.

9. In case of bailment, seizure or intervention of third parties, the customer must notify ELCOM immediately.

10. In the case of culpable violation on the part of the customer of significant obligations of the contract, and particularly in case of delay in pay-ment, ELCOM is entitled to return of the goods after notification. The customer is obligated to return the goods. The return and/or exercise of retained ownership or bailment of the supplied objects by ELCOM does not represent withdrawal from the contract, unless ELCOM specifically so states.

11. After prior notice, ELCOM is entitled to collect the retained goods and to satisfy any open claims by their sale.

XII. Place of fulfilment – legal jurisdiction – region of applicability1. The place of fulfilment and legal jurisdiction shall be Heilbronn,

Germany.2. These general terms of business apply only to companies in the

sense of §310 paragraph 1 of the BGB. ELCOM is a manufacturer; sales are exclusively on a b2b basis.

3. German law shall shall apply to the contractual relationship exclusively. Application of the UN Convention on Contracts for the International Sales of Goods (CISG) is hereby excluded.

4. Supplements, extensions, changes or the cancellation of this purchase contract require the written form to be effective. This shall also applyto the requirement of the written form.

5. Should for any reasons individual terms of these GTC prove to be invalid in whole or in part, the validity of the remaining terms shall remain unaffected. The parties to the contract shall moreover undertake in such a case to replace the ineffective or inexecutable term with an effective and executable term that corresponds as closely as possible to the business and conceptual provisions within legal limits.

VIII. Return of goods1. The return of properly delivered goods may only be carried out with

the prior written approval of ELCOM. Return shipping is at the risk and cost of the customer.

2. For undamaged goods, ELCOM shall invoice an amount of 15% of the net invoice amount for administrative costs, testing and repackaging.

3. For damaged goods or goods with a net value under 25 Euros, there will be no credit. Custom fabrication and individual components from sets are generally excluded from return and credit.

IX. Custom designs1. If custom fabrication is ordered and the customer requests changes,

any costs already incurred must be paid. If an order is cancelled, the entire value of the order less any savings due to cancellation of the order must be paid.

X. Guarantee, product liability1. The customer may not exercise any rights due to defects in an

ELCOM delivery or service if the value or suitability of the ELCOM delivery or service is only insignificantly diminished.

2. Notification of defects must be made immediately in case of obvious defects, but must be received by ELCOM no later than 6 working days after receipt of the goods at the determined location, in writ-ing or by fax, with an exact description of the defect. Notification of hidden defects must be made in writing immediately after their discovery, with an exact description. ELCOM is not obligated to honour the warranty if the customer fails to notify ELCOM in writing of obvious damage within the claim period. The customer must demonstrate that the claim has been made in writing on time.

3. ELCOM's warranty applies for a period of 2 years. If ELCOM has legally guaranteed only a shorter warranty period, this shall take precedence over the warranty period specified herein. In case of jus-tified claims ELCOM undertakes – insofar as the defect was claimed in writing within the claims period – either to correct the defect or to replace the goods, as ELCOM deems suitable. However, this only applies if the complete unit has been returned. The customer may only withdraw from the contract and/or reduce the purchase price if ELCOM has failed to correct the defect after a reasonable period. Damage compensation shall only be due in case of gross negligence or malice.

4. Insofar as ELCOM has corrected and/or replaced the defect, any reduction in the purchase price or withdrawal from the contract on the part of the customer is excluded.

5. Damage compensation claims may only be made by the customer if replacement has failed or ELCOM has unjustifiably refused replacement.

6. Any damage replacement obligation on the part of ELCOM, regard-less of legal justification, is otherwise limited to typical foreseeable damages. Insofar as ELCOM's liability is excluded or limited, this also applies to the personal liability of ELCOM's employees, work-ers, colleagues, representatives and other fulfilment staff. Insofar as ELCOM does not bear responsibility for a defect, the costs of examination of the defect shall be borne by the customer.

7. For third-party products supplied by ELCOM, ELCOM's liability is restricted to transfer of the liability claims made by ELCOM them-selves against the supplier of the third-party product.

8. Furthermore, no liability shall be accepted for damages due to unsuitable or improper use, incorrect installation and/or commis-sioning by the customer or third parties, or that cannot be traced to physical, chemical, electrochemical or electrical influences that are ELCOM's responsibility.

9. Liability due to culpable harm to life, limb or health remains unaf-fected. This also applies to the mandatory liability governed by the German Product Liability Law. Otherwise – insofar as no other terms are previously agreed upon – liability on the part of ELCOM is excluded.

10. ELCOM is liable according to legal requirements if the customer makes damage compensation claims due to mal-ice or gross negligence – including malice or gross negligence of representatives of ELCOM or its agents. ELCOM has a right in any case to proof of exoneration as specified by §831 BGB.

11. Insofar as ELCOM is not accused of malicious breach of contract, liability for damages is limited to typically foreseeable damages. Loss of profit and damage due to interruption of production shall not be compensated.

12. Insofar as ELCOM's liability is excluded or limited, this applies also for the personal liability of ELCOM's employees, workers, representatives and fulfilment staff.

XI. Extended retention of ownership1. The objects to be supplied (retained goods) remain ELCOM's

property until the fulfilment of all of ELCOM's claims against the customer proceeding from their business relationship.

2. If the value of all security rights due to ELCOM exceeds the value of all secured claims by more than 120 percent, ELCOM will release a corresponding portion of the security rights at the customer's request.

3. While ownership retention applies, the customer is not entitled to bailment or chattel mortgage, and is only entitled to sell the objects to resellers in the normal course of business and only subject to the condition that the reseller receives payment from his or her own customers or subject to the fact that ownership shall only be transferred to the customer if the customer has entirely fulfilled his or own payment obligations.

4. If the customer resells retained goods, he or she thereby transfers his or her future claims against his or her own customers from said resale, with all auxiliary rights – including any payment balance re-quests – as security, without this requiring later special declaration. If the retained goods are resold together with other objects without an individual price being agreed upon for the retained goods, the customer transfers that portion of the total payment corresponding to the price charged by ELCOM to the retained goods to ELCOM, with priority over the remaining payment. Version 10/2010

135

Neckarsulm

Friedersdorf

Serv

ices

Contact

Your regional contact

CentralGottfried-Leibniz-Str. 1 D-74172 NeckarsulmPhone +49 (0)7132 / 48 69-0 Fax +49 (0)7132 / 48 69-200Email: [email protected]: www.elcom.de

Sales office northDirk HuckenbeckPestinghausen 23D-27211 BassumPhone: 04249 / 96 02 64Fax: 04249 / 96 02 [email protected]

SwitzerlandESAG Kommunikations-Systeme AGGewerbehaus „ASP“Wehntalerstraße 6CH-8154 OberglattPhone: 0041 / 44 852 3939Fax: 0041 / 44 852 3949www.esag-zuerich.ch

NorwayQualitronicOdd-Jubal Andersen & CoTvetenveien 157N-0671 OsloPhone: 0047 22 / 757 460Fax: 0047 22 / 264 [email protected]

IndiaELCOM Door Communications (India) Pvt. Ltd.4 Thakorbhai Ind. EstateN.Highway No.8, Abrama-EastValsad – 396 001 Guj. IndiaPhone: 0091 / 2632 243 799Fax: 0091 / 2632 250 [email protected]

LuxembourgMarco zenner s.à.r.l.4, rue de la ForêtL-8065 BertrangePhone: 00352 / 4415 441Fax: 00352 / 4557 [email protected]

Sales office southwestAleksandar GuzinaGottfried-Leibniz-Str. 1D-74172 NeckarsulmPhone: 07132 / 48 69 104Fax: 07132 / 48 69 [email protected]

Sales office eastJörg MüllerBreite Straße 2D-06188 LandsbergPhone: 034602 / 40 07 43Fax: 034602 / 40 07 [email protected]

Sales office southeastBernd DostalStauffenbergstraße 32D-07318 SaalfeldPhone: 03671 / 672 144Fax: 03671 / 672 [email protected]

Sales office NRWAndreas JansenHermann-Schmitz-Allee 20D-41751 ViersenPhone: 02162 / 10 29 701Fax: 02162 / 10 29 [email protected]

Sales office westFrank BräutigamSchlörstraße 10D-63743 AschaffenburgPhone: 06021 / 439 9233Fax: 06021 / 439 [email protected]

Sales office northeastLothar LürdingFichtestraße 57D-03046 CottbusPhone: 0355 / 251 62Fax: 0355 / 251 [email protected]

Sales office centralGerhard SchmoockSüdstraße 5D-99195 Erfurt-StotternheimPhone: 036204 / 520 09Fax: 036204 / 520 [email protected]

Bitterfeld Subsidiary OT FriedersdorfGewerbegebiet Vordere AueD-06774 MuldestauseePhone +49 (0)3493 / 5053-0 Fax +49 (0)3493 / 55282Email: [email protected]

Inland sales organisation

Overseas sales organisation

Technical hotline: Phone 07132 / 4869-555 – Fax 07132 / 4869-556 – Email: [email protected]

Sales office southWolfgang FinkenheimGlaswandstraße 8D-82377 PenzbergPhone: 08856 / 80 38 703Fax: 08856 / 80 38 [email protected]

Czech RepublicSBS Elektro s.r.o.obchodni oddeleniNa Spádu 2133/8CZ-400 01 Usti nad LabemPhone: 00420 / 47 520 79 40Fax: 00420 / 47 520 79 42

LatviaELCOM Komunikacijas SIAGanibu dambis 36LV-1005 RigaPhone: 00371 / 6750 18 08Fax: 00371 / 6750 18 [email protected]

AustriaSascha SchleweisGottfried-Leibniz-Str. 1D-74172 NeckarsulmPhone: 07132 / 48 69 226Fax: 07132 / 48 69 [email protected]

ELCOM GmbH & Co. KG

Central

Gottfried-Leibniz-Str. 1

D-74172 Neckarsulm

Phone: +49 (0)71 32 / 48 69-0

Fax: +49 (0)71 32 / 48 69-200

Email: [email protected]

Bitterfeld Subsidiary

OT Friedersdorf

Gewerbegebiet Vordere Aue

D-06774 Muldestausee

Phone: +49 (0)34 93 / 50 53-0

Fax: +49 (0)34 93 / 55 282

Email: [email protected]

www.elcom.de

Gen

eral

cat

alog

ue 2

012

(EN

oP),

Mar

ch 2

012

editi

on ·

Ord

er n

o. 0

21.1

20.1

Subj

ect t

o te

chni

cal c

hang

es, e

rror

s an

d pr

intin

g er

rors

.

elcom - general catalogue 2012

Documents

wire video systembvf

i2 bus technology

bus line

video intercoms

video signal

flexible system technology

handsfree video intercom

familiar i2 bus audio