ekon wireless ecatalog
TRANSCRIPT
1
BMS Energy Efficiency Control System
www.ekonhome.com.cn
2
Content
1. Energy Efficient HVAC System Reduce Operation Cost in office, schools, hospitals and large scale buildings. This robust Wireless (Zigbee) Building Management System can be easily installed in existing buildings within few days! Option to use Modbus for buildings that are under construction.
Page 4 - 15
3. ECOlink – Control Air Condition and Water Heater from anywhere by Android / iPhone App or by SMS Standalone GSM device (require SIM card) works directly with smart phones to activate air conditions and heaters via either Infrared (wireless) or by Relay. Can set to send status SMS back for feedback. Option to add Freeze Sensor to send SMS in case room temperature goes below freezing. Compatible with most air condition brand that has remote control. Can be embedded inside HVAC.
Page 16 - 17
2. ECOsense – Wireless Energy Saving Motion Sensor for Air Condition Automatically and Wirelessly Power Off Air Conditioner and Heater in an empty room to significantly Save Energy. This standalone small device works on batteries and is compatible with most air condition brand that has remote control.
Page 18 - 20
3
4. Wifi and Smart Thermostats Wifi thermostat works directly with iPhone and Android via wireless router. Wide Range of thermostats for Fan Coils, Split Air Conditions and Floor Heating. Can combine light switch inside the thermostat with remote control motion sensor to Save Energy.
Page 21 - 24
5. Smart Hotel Room / Building Centrally Control HVAC, Lights, TV, curtains and more via touch screen to give hotel’s guests maximum luxury. Save Energy by centrally control from the lobby all the electric facilities in each room.
Page 25 - 28
6. Home Automation System for Real Estate Developers Increase value of residential compounds by introducing luxury smart home in each of the apartments / villas. Solution for construction companies to give their home buyers competitive advantage at relatively low investment.
Page 29 - 38
4
EKON Manufacturing Inc.
Global Excellence in Affordable Control Systems
EKON Manufacturing Inc. is one of the world's leading manufacturers of advanced control and automation systems, innovating technology and reinventing the way people live and work. Offering integrated solutions to control lighting, motors, audio,
video and environmental systems. EKON‟ streamline technology improving the quality of life for people in corporate
boardrooms, hotels, buildings, offices and in their homes. Since 1999, EKON Inc. has stood as one of the most trusted and reputable Intelligent
Home & Building system provider, serving the worldwide market. We at EKON pride ourselves in offering high quality products and total solution for our customers.
EKON‟s products are sold all over Europe and the Middle East from our Asian sales office in Shanghai, China. Our products are installed via our distributor network in major hotels, office
buildings, apartment complexes and 1000‟s of villas globally.
Ekon‟s products are intended to provide simple, complete control of electronic and mechanical
devices. From one of the touch screen displays you are capable of controlling audio and video equipment, lights, heating and air conditioning, fire
places, curtains and speakers throughout the property or individual room. EKON‟s control systems
can be used to control other brands of equipment by IR signaling, contact closures or RS232/RS458 serial communications.
5
BM
S
Energy Efficient HVAC System
Features
Control large number of HVAC and Lights Simultaneously Easy to use Graphical User Interface
Simple as 1, 2, 3
1. Select multiple Thermostat \ Lights
or Zones to control
2. Select Settings (Mode, Fan Level,
Set point, Lock Keypad and Light on\off)
3. Press “SEND”
2 way communication
Show Online the real status of all Air Conditions, Heating, Lights and Blinds in a building
Status include Set Point Temperature, Room Temperature, HVAC Mode (On / Off / Heat / Cold or Auto), Fan Level, Keypad Unlock / Lock, Light On or Off and Blinds Open or Close.
6
Easy Installation (no wires) Wireless Zigbee Thermostat ensures installation is completed in matters of minutes.
Retrofit - install in existing buildings.
Simply replace the old thermostat and let it communicate with the master controller over the air by Radio Frequency 2.4GHz
Group Control Select Single or Multiple Zones or Pre Defined Thermostat and Light and Control them all by 1 press of a button
Save Energy – Fix Set Point Lock thermostats at optimum set point and ensure user cannot change it.
Ensure thermostats cannot be turned ON by user from the thermostat at certain period of times when unnecessary.
Save Energy – Auto Off Add wireless Motion sensor to power off Lights and HVAC when room is left empty for preset period of time
7
BM
S
Simple Setup (no programming) This is as simple as it can be. If you know how to setup up you smart phone, you will know how to setup this BMS system
Each thermostat and light is given an address. Give it a name. You are done.
User Interface in any Language Each of the Zones, Thermostats and Scenes are named in any name and any language you wish
Names can be modified at any time after. These names are used in messages also
HVAC + LIGHT combined
Thermostat and Light Switches are combined together on the same device for slick design
Smart Timer – Energy Save
Weekly Timer to power On or Off group of air conditions at certain times
Allow to set holiday dates to bypass the timer automatically. Optional outdoor temperature sensor to bypass timer if outside conditions are idle
8
Compatible with Central AirCon Wirelessly Control Central Air Condition with remote control via Infrared
Note: thermostat must be matched with the AirCon brand
Safety First – Fire AC shut down Automatically Power Off all the air conditions in case of a Fire to ensure fire is not stronger and smoke is not circulated in AirCon sys.
Interface with Fire Alarm system by Dry Contact or RS485
All Building/s Control Control all HVAC and Lights in the building/s from main control room
Messages Online System will display messages about any abnormal status of any device
9
BM
S
System Layout
System Layout for Split AirCon is as simple as that:
Control Room Room 1 Room 2 Room 3…
Connect thermostats and light switches around the buildings as follows:
Master controllers are connected together via standard TCP/IP
ZIGBEE – Mesh RF Wireless Technology
Option to connect by Modbus for buildings that are under construction:
Master controllers are located centrally in each zone of around 120 devices. It sends data in different channel so there is no RF conflict
10
Wireless Fan Coil Control System Layout (Zigbee)
Modbus Fan Coil Control System Layout
11
BM
S
BMS Products
ZigBee Thermostat for Fan Coil
Specification Voltage: 24VDC / 110VAC / 220VAC Power Consumption: 1.5W Temperature Range: 10 ~ 30oc Accuracy: ± 1oc Ambient temperature range: 0 ~ 50oc Housing: ABS flame retardant material CE standard Color: Beige (custom colors for MOQ) LCD 5 inch. Blue color background (custom colors for MOQ) LCD indication: Fan Level, Mode, Lock, Room Temp and Set Point Hand Held Remote control optional Surface Mount on wall
Main Chip by Freescale (Motorola)
Networking RF construction: star, line, tree, mesh
Communication distance: maximum 1000 meters (at line of sight)
Wireless frequency: 2405-2485M, 2.4GHz ISM free frequency range
RF Channel: 16 channels Size: 150 x 86mm
18mm deep
Main Features
Communicate with master controller
via ZigBee RF or Modbus
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Can be Locked (disable Manual
control) from master controller
Plug & Play – only need power
Application: Building Automation
(retrofit) and Energy Save
2 way communication (feedback)
86mm
150mm
Surface mount
ZigBee
12
Fan Coil Wiring Optional 2 or 4 pumps Thermostats:
ZigBee Thermostat (Fan Coil) & Light Switch
Main Features
Communicate with master controller
via ZigBee RF or Modbus
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Can be Locked (disable Manual
control) from master controller
Application: Building Automation
(retrofit) and Energy Save
2 way communication (status)
Control 2 LIGHT Loads
LED indication of Light status
Make wall looks more organized
ZigBee
13
BM
S
ZigBee Thermostat for Split Air Condition
Thermostat has IR and RF:
1. Radio Frequency between thermostat and controller 2. Infrared between thermostat and air condition
IR codes are pre programmed at the factory to match with certain models of air
conditions. Therefore, each module must order to match the specific air condition.
Maximum distance of IR signal is 6 meters in line of sight.
ZigBee Thermostat for Split Air Condition & light switch
Main Features
Communicate with master controller
via ZigBee RF or Modbus
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Can be Locked (disable Manual
control) from master controller
Plug & Play – only need power
Application: Building Automation
(retrofit) and Energy Save
2 way communication (feedback)
Main Features
Communicate with master controller
via ZigBee RF or Modbus
Control 2 LIGHT, Loads 10Amp each
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Can be Locked (disable Manual
control) from master controller
Application: Building Automation
(retrofit) and Energy Save
2 way communication (status)
LED indication of Light status
IR
IR
ZigBee
ZigBee
14
Zigbee Dual Light Switch
Specification Voltage: 120 / 220VAC at 50/60Hz Power Consumption: 1.2W Light Load: 12Amp per channel for resistive load. 8 Amp for low voltage loads. 2 Amp
for inductive loads (Fluorescent and CFL) LED Status indication for each channel on the button Optional Motion sensor to power off Light when room left empty for a preset period of
time Housing: ABS flame retardant material CE standard Color: Beige (custom colors for MOQ) Hand Held Remote control optional Size: 86 x 86mm
Wall Mount Fit most European wall box: 60mm diameter 72x72mm (German Standard) (British Standard)
Main Features
Control 2 LIGHT Loads, 10Amp each
Communicate with master controller
via ZigBee RF or Modbus
Application: Building Automation
(retrofit) and Energy Save
2 way communication (status)
LED indication of Light status
86mm
86mm 18 45mm
In-Wall mount
ZigBee
15
BM
S
Wiring light switch
Connect power and load as follows:
Zigbee Single Load Light Switch
Zigbee Motorized Control Switch
Main Features
Control 220V motors (up/down)
Communicate with master controller
via ZigBee RF
Application: Building Automation
(retrofit) and Energy Save
2 way communication (status)
LED indication of Light status
Control Blinds, Curtains, etc.
Main Features
Control 1 LIGHT Loads, 10Amp
Communicate with master controller
via ZigBee RF or Modbus
Application: Building Automation
(retrofit) and Energy Save
2 way communication (status)
LED indication of Light status
ZigBee
ZigBee
16
Master Controller
Main Features
Optional with or without touch screen Plug and Play – only power wire Totally wireless - Wifi and ZigBee (optional Modbus) Server Build In Easy to use GUI in any language 2 way communication Smart Weekly and Holiday timers Grouping – Scenes, Groups, Zones, etc.
Specification
Number of Loads 256 loads (thermostat \ light switch \ motor switch) per Master. Recommended max. 127
Number of Scenes 32 scenes per master (each scene can control all loads)
Master control buttons Zone Thermostat On and Off, All loads On and Off
EKON RF reliability High resistance to RF noise – 99.5% reliable
EKON RF Speed Signal Respond within 0.2 seconds (without Mesh RF)
EKON RF Distance At least 1000 meters from controller in open space
Control Communication ZigBee RF Mesh Technology – coordinator
EKON RF communication Receive Status Request - 2 way communication
Fire Alarm Interface Optional with Dry Contact Via RF or Modbus
RS232 protocol ASCII and HEX (in any combination)
TCP/IP Web Browser
Voltage 110 / 220VAC, 50/60Hz
ZigBee
17
EC
Ose
nse
ECOsense
Save Energy by Automatically and Wirelessly Power off Air-Condition \ Heater & TV when room is left empty
Cut Electricity bills by 20-50%
Learning IR Remote Control Compatible with most air condition that has IR remote control
Automatically Turns Off Heating \ Air-Condition when room is left empty
Delay Timer of 15. 30 or 60 min
DIY - No need wires or installation
Wireless, simply fix on wall or ceiling
Best Solution for Green Environment
Low-Cost device with High-Savings
Patent: #200920072195.5
LARGE Energy Savings Reduce Electric Bill substantially
Up to 50% Savings
18
Specification
Timer select switch of 15, 30 and 60 minutes from the time room is left empty till Power Off commands are sent
Detecting range: <6M at 3600 IR learning code: 2 IR commands of most devices
(stored in Flash memory – also if no battery installed) IR transmitting range: <6M IR transmitting direction: one in front and one on side Voltage: 3VDC (2 AAA batteries) Size: 60 x 60 x 15 mm Mounting: optional Ceiling or Wall Works with IR devices that has discrete OFF command
(one Power button on remote is not compatible) Not suitable for room with moving objects
(pets, curtains in wind, etc.) Indoor use only
Learning IR Compatible with most Air Condition brands
19
EC
Olin
k
ECOlink – Remote Access
Smart Air Condition (IR)
Turn On or Off Air condition Remotely
Control Air Condition and Water Heater from anywhere by Android, iPhone App or by SMS
Water Heater Control
20Amp
Garage Door Control
20
Command Controls include all air condition settings
Send COLD SMS or Press COLD on Android / iPhone App
Send HOT SMS or Press HOT on Android / iPhone App
Send OFF SMS or Press OFF on Android / iPhone App
On
Cool
Fan
Temp
On Heat
Fan
Temp
Off
SMS Status Back ECOlink can send SMS back to confirm if command received successfully
SMS Control
SMS Feedback )
Freeze Sensor: Automatically send SMS Warning if room temperature goes bellow set-point
0oc
-10 oc (最低)
Send another SMS when temperature goes back above set-point
Simple to install Add SIM card No Wires
21
EC
Olin
k
ECOlink 规格
设备电压: 5VDC (2 Amp)
尺寸: 135 x 100 x 38 mm
红外发射范围: <6米
工作频段: 双频 EGSM900/GSM1800
红外发射方向: 一个在前方
红外学习码:可记忆 3个红外码,可适应
大部分的设备发送指令 (内安装有闪存)
安装: 可安装在桌子或墙上
控制两个设备每个20Amp
Set Room Temperature Remotely before arriving home / office
Turn On Heater
Turn On AirCon
Energy Saving Ensure air conditions are Switched Off
Up to 20% Saving
Learning IR Compatible with most Air Condition brands
ECOlink Specification
Device Voltage: 5VDC (2 Amp) Size: 135 x 100 x 38 mm IR transmitting range: <6M Working frequency bands:
Dual band EGSM900/GSM1800 IR transmitting direction: one in front IR learning code: 3 IR commands of most
devices (stored in Flash memory Mounting: optional Table or Wall mount
Control 2 loads of 20Amp each Indoor use only, 5 to 40°c, up to 85%
relative humidity
22
Wifi and Smart Thermostats for Fan Coil
Wifi Thermostat for Fan Coil
Fan Coil Thermostat
Thermostat for Fan Coil & Light Switch
Main Features Control 2 LIGHT, Loads 10Amp each
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
LED indication of Light status
Ensures wall looks more organized
Select 2 or 4 pumps
Option if Fan continues to work after reaching set point or stop
Optional IR remote control Optional Timer Add-On
Main Features Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Optional RS485 add-on
Select 2 or 4 pumps
Option if Fan continues to work after reaching set point or stop
Optional IR remote control Optional Timer Add-On
Main Features Control from iPhone, Android or PC
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Optional RS485 add-on
Select 2 or 4 pumps
Option if Fan continues to work after reaching set point or stop
Optional IR remote control Optional Timer Add-On
wifi
23
Th
erm
osta
t Wifi and Smart Thermostats for Split A/C
Wifi Thermostat for Split A/C
Split A/C Thermostat
Thermostat for Split A/C & Light Switch
Main Features Control Split AirCon that has remote
control (pre programmed IR at factory)
Control 2 LIGHT, Loads 10Amp each
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
LED indication of Light status
Ensures wall looks more organized
Option if Fan continues to work after reaching set point or stop
Optional IR remote control Optional Timer Add-On
Main Features Control Split AirCon that has remote
control (pre programmed IR at factory)
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Optional RS485 add-on
Option if Fan continues to work after reaching set point or stop
Optional IR remote control Optional Timer Add-On
Main Features Control Split AirCon that has remote
control (pre programmed IR at factory)
Control from iPhone, Android or PC
Control Cold / Hot / Auto mode, Set
Point, Fan 1, 2, 3 and Auto
Optional RS485 add-on
Option if Fan continues to work after reaching set point or stop
Optional IR remote control Optional Timer Add-On
wifi
IR
IR
IR
24
Floor Heating Thermostat
Light Switch
2 Load of 10Amp Light Switch Can add optional wireless motion sensor to power off lights when room left empty
ECOsense - Wireless motion sensor for light and AirCon
Wireless motion sensor automatically power off light/s and air Condition
when room is left empty. Require 2 AAA batteries.
Main Features Control Floor heating
16Amp Relay built in
Option to use Temperature sensor in
thermostat (room temp) or connect
sensor inside the floor
Optional Weekly Timer Add-On
25
Th
erm
osta
t
Thermostat Wiring
Light Switch Wiring
26
Smart Hotel
1 2 1
2 2 2
Entrance 7” touch screen control
panel – on wall
Light switch (Dimmer)
“Do Not Disturb” “Clean Room” sign controller
Wireless 7” touch screen control panel
TV Control (IR)
AC
Key Master On \ Off interface
Thermostat
27
Sm
art H
ote
l
Features and Advantages
Full Control and Status On each touch screen in the Room (table, wall or wireless), the user can control and see status of lights, dimmers or appliance on \ off and can control
each one of the connected devices with the simple to use graphic interface.
The touch screens have buttons divided to zones and each button or zone can
have individual name, depends on customer demands, and can be written in any language.
Entertainment and Information Each one of the touch screens can be programmed to show Local Temperature, Stock rate, Restaurant, SPA and other advertisements.
Digital Lighting Control Lighting System involves layering ambient, accent and task lighting to create interesting contrasts and establish focal points or points of interest where
attention is focused. When using a preset scene control system, different lighting scenes can be created and recalled whenever desired with the touch of
a button.
Scenarios – everything by one press of a button
Scenario means controlling more than 1 device at the same time. There are many types of scenarios. Most common hotel scenes are:
Leaving the Room Scene
Removing the Card Key from its socket or pressing “AWAY” button on the touch screen at the main entrance will do the following:
1. Turn off all the lights in the Guest Room 2. Close all blinds
3. Turn off air conditions and heaters
4. Turn off audio and video devices
Coming to the Room Scene When user arrives back to the room, as soon as the key is entered into its
socket, the system will do the following: 1. Turn on selected lights in the room (preset levels)
2. Open selected blinds (user requirement) 3. Turn on air conditions \ heaters in selected areas
4. Play favorite background music
Night Scene
Pressing this button (located next to bed) turns off all lights in the room, activate “Do Not Disturb” sign and dim the night light.
28
Touch Screen Control
Lighting Control
HVAC Control
Hotel Information
29
Sm
art H
ote
l
Control Center (total rooms control)
Since the system works in 2 way communications, the Control Center at the Lobby can know at any time the status of each room on-line.
Moreover, after check in, the receptionist can activate lights and air condition in
advance before the guests enter the room.
There is an option to have Floor Monitoring station in which each floor in the
building can be monitored separately.
30
Home Automation System
for Construction Companies and Real Estate Developers
Affordable Smart Home System for Residential Compounds:
Increase value of Property at relatively low investment
Luxury solution to increase status of the all compound
Give competitive advantage
Functions
Wall mounted touch screen control center
7 inch touch screen
Simple to Use Graphical Interface
GUI in any Language
Master Controller for all electric devices in home
System show Status of all devices in the house
31
Sm
art H
om
e
Control
Lights (dimmer or on/off) Air Condition and Heaters Curtains and Blinds Audio and Video devices Alarm System & CCTV Water Heaters
Wireless Control from any Smart Phone / Pad (iPhone, iPad, Android and others)
Smart Weekly Timer
• Turn On or Off any light in the house / office at any required time • Select the days of the week the timer should be active • Automatically disable timer according to system mode (i.e. disable
water heater during holiday)
32
Scenario (grouping) Pressing a button can trigger many devices at the same time. For example AWAY Scene: power off all lights, set off all air conditions, activate alarm
system, turn off all TV‟s, etc.
Optional video intercom for the all apartments
Call Elevator from touch screen
33
Sm
art H
om
e
Activate and deactivate alarm system from the touch screen
User interface in any language
There are 2 main technologies for Smart Home:
1. MODBUS Technology
Install in new buildings under construction. Add CAT5 wire
between all the wall switches in daisy chain to main master controller
2. PLC (Power Line Carriage)
Installation with minimum wiring -only ensure there is neutral
wire in the wall switches
34
MODBUS System Layout
Modbus Products and Wiring
35
Sm
art H
om
e
36
PLC (Power Line Carrier) System Layout
PLC wiring
Dimmer installation On\Off module installation
Motor Control (110VAC - 230VAC) Motor Control (low voltage)
37
Sm
art H
om
e
Heavy Load PLC Dimmer DIN Rail
Specification Rated Voltage: 230V±10%, 50Hz Rated Load: Each load not exceeds 1300W for dim. Two loads not exceed 2000W in sum. Built-in Fuse Size: 11.5cm (L) x 9.6cm (W) x 4.6cm (H)
PLC Loads
4 Relays PLC Module - DIN Rail
Specification Rated Voltage: 230V±10%, 50Hz Rated Load: Resistive Load < 8A Electric Transformer Load < 5A Inductive Load < 1.5A per load Size: 11.5cm (L) x 9.6cm (W) x 4cm (H) Built-in fuse Specification Rated Voltage: 230V±10%, 50Hz Rated Load: Resistive Load < 8A Electric Transformer Load < 5A Inductive Load < 1.5A Size: 11.5cm (L) x 9.6cm (W) x 4cm (H) Built-in fuse
38
PLC Products -Switching Devices (Micro Modules)
Micro modules are used to control Lighting, Motorized Curtains & Screens, and other.
These can be installed behind the regular wall switch for manual control or alternatively in the ceiling next
to controlled load. These modules have small dimension so it can fit in most wall switch boxes. There are
few types of Micro modules to choose from, depend on the load type to be controlled and the current.
Dimmer
1 load
Dimmer
2 load
On\Off
1 load
On\Off
2 loads
Motor
230VAC
Motor
12-24vdc
DIN On\Off
4 loads
DIN Dimmer
2x1000W
Micro
Module
Crystal
Switch
/ / /
Control Load
Incandescent lamp,
Halogen, Low volt (only magnetic transformer)
Incandescent, CFL, florescent,
Halogen, motors, heaters, air
conditions, etc.
Motors (up\down)
Low
voltage motors
(up\down
Halogen,
motors, heaters, air conditions
Incandescent
lamp, Halogen, Low volt
Current 300W Total
400W
8Amp for Resistive 5Amp for Low Volt
1.5A for Florescent
(Amp per Channel)
90 Watt
motor
Dry
Contact – 90 Watt
4 X 8Amp 2 x 1000
Watt
Electronic addressing
Fade Rate 2 Way communication
Status request
Behind Switch
Switch Type Pulse or Toggle
Pulse or Toggle
Toggle Toggle Toggle Pulse x 2 Pulse or Toggle
Pulse or Toggle
Toggle
Last dim
memory
Voltage 220-240VAC at 50Hz OR 110VAC at 60Hz
Neutral PLC transmit speed
<=1.5 second
False Rejection Ratio (FRR)
<=0.1%
False Accept Ratio (FAR)
<=0.01%
Operating temperature
0-45oc
Operating
Humidity 20-80%
Dimension
micro module 43 x 47 x 19mm 45 x 47 x 19mm 11.5cm x 9.6cm x 4cm (H) 7x7x10cm
Wall Box depth Minimum 35mm
Scenes memory
16 Scenes per module
Model No. E2263 E2264 E2267 E2268 E3160 E3160L E2268HX E2264HX E2267H
39
Sm
art H
om
e
IR Module PLC
Control Audio Video with Infra Red controller (IR).
Features:
Control up to 32 IR commands
Communicate with controller over power line
(no control wires)
Easy setup (just plug to power)
Electronic Addressing (easy setup)
3 Phase Coupler for PLC Repeat the power line signal in all 3 phases
Features:
Only use for 3 Phase installation
Low power consumption: ≤ 1W
Installed in electric board
Size: 115mm(L) x 93mm(W) x40mm(H)
4 Scene Control (Digital Inputs) for PLC Activate up to 4 scenes by one press of a button
Communicate with controller over power line (no control wires)
Electronic Addressing (easy setup)
Easy installation (only power) Connect sensors via Dry Contact (Rain, wind, Light sensors)
Selection between „Behind the Switch‟ and „Crystal Wall Switch‟
Total Home Automation for
Real Estate Developers
Apartment Complex Office Building
40
Energy Efficient Solutions
EKON Manufacturing Inc.
EKON China Headquarter 191Rijing Road, Area B, 3rd Floor, Wai Gao Qiao Free Tread Zone, Pudong District, Shanghai, China 0086 21 58661899 [email protected]
EKON HOME Inc.
EKON Hong Kong Office 317-319 Des Voeux Road Central Kai tak /commercial Building, Room 1208 Hong Kong 00852 800906152 [email protected]