ejc65e
TRANSCRIPT
-
7/29/2019 EJC65E
1/8
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
Revision Date: 2006-2-08
Web: http://www.sandvik.com
2 0 0 6 S a n d v i k M i n i n g a n d C o n s t r u c t i o n C a n a d a I n c
EJC 65ETechnical Specification
L0665E-1 1/8
General Arrangement
NOTE: All dimensions in millimeters. Dimensions inbrackets are in inches.All vertical dimensions are for an empty unit.
2.4 m (8 ft)
http://www.ejc.sandvik.com/http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
2/8
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
Revision Date: 2006-2-08
Web: http://www.sandvik.com
20
06SandvikMiningandConstructionCanadaInc.
SandvikMiningandConstructionreservestherightto
Technical Specification
L0665E-1 2/8EJC 65E
Standard Unit Specifications
General Information Power Train
Systems
Steering HydraulicsClosed centre system with a single fixed displacementgear pump. One double acting steer cylinder equipped
with electro./mechanical control lever.
Main Dimensions
Total length 5842 mm 230 in
Width without bucket 1372 mm 54 in
Maximum width 1448 mm 57 in
Height with safety canopy 2134 mm 84 in
Operating Weights
Total operating weight 7130 kg 15720 lb.
front axle 1823 kg 4020 lb.
rear axle 5307 kg 11700 lb.
Loaded Weights
Total loaded weight 10079 kg 22220 lb.
front axle 6292 kg 13872 lb.rear axle 3786 kg 8348 lb.
Capacities
Tramming capacity 2948 kg 6500 lb.
Break out force, lift 37 kN 3791 kg 8340 lbf
Break out force, tilt 46 kN 4750 kg 10450 lbf
Tipping load 7727 kg 17000 lb.
Standard bucket 1.2 m 1.5 yd
Bucket Motion Times
Raising time 6.5 sec.
Lowering time 4.3 sec.
Dumping time 3.0 sec.Driving Speeds Forward and Reverse(Loaded)
60 Hz motor 0 to 12.2 km/h 7.6 m.p.h.
50 Hz motor 0 to 10.2 km/h 6.3 m.p.h.
Frame
Rear and front frame Welded steel box construction
Material G40.21 - 50WT-CAT#3
Central hinge Welded steel box construction
with hardened steel spherical
bearings
Material G40.21 - 50WT-CAT#3
Lift arms Solid plate construction
Material G40.21 - 50WT-CAT#3
Tanks are welded to frame.
Motor
Type AC induction type, 3 phase
Output 37 kW (50 Hp)
Voltage 600 V
Frequency 60Hz/50Hz
Speed 1700 RPM/1475 RPM
Insulation class F
Cable reel Self winding type with automatic
tension control and low cable
shutdown
Electric cable 152 m (500 ft.) of #6 type GGC
cable including box mount type
Joy plug
Transfer Case
Dana SOH Gear drive 2.39:1
Transmission
Rexroth AA4V56 Hydrostatic transmission with
forward and reverse
Axles
Front axle Dana SOH 12D0840,
conventional differential, fixed.
Rear axle Dana SOH 12D0840, no-spin
differential, fixed.
Centre articulation/
oscillation
16
Tires
Tire size 9.00 X 20, 18 PLY
Air pressure, front 517 kPa 5.17 bar 75 psi
Air pressure, rear 517 kPa 5.17 bar 75 psi
http://www.ejc.sandvik.com/http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
3/8
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
Revision Date: 2006-2-08
Web: http://www.sandvik.com
2 0 0 6 S a n d v i k M i n i n g a n d C o n s t r u c t i o n C a n a d a I n c
EJC 65ETechnical Specification
L0665E-1 3/8
Bucket HydraulicsFull hydraulic open-centre system with one gear pump.Equipped with electro./mechanical control lever, two liftcylinders and one dump cylinder.
Standard BrakesDynamic service braking through the hydrostatictransmission. The parking brake is a spring applied,hydraulically released dry disc brake mounted on the frontaxle pinion.
Other Standard Equipment Electric gauges
Central manual lubrication system
SAE JIC hose fittings
ManualsAll manuals are delivered on CD-ROM in web based
format with Adobe PDF output for printing.
Optional Equipment
Specifications
Turning Radius
Inner 1905 mm 75 in
Outer 3861 mm 152 in
Turning angle 40
Main Components
Hydraulic pump GearControl valve Electro. / mechanical
Steering cylinders EJC 3.5" bore x 1.75" rod
(89 mm x 44 mm)
Pressure Settings
Main relief 15.2 MPa 152 bar 2200 psi
Port relief valves 17.2 MPa 172 bar 2500 psi
Main Components
Hydraulic pump Gear
Control valve Electro. / mechanical
Lift cylinders EJC 4.0" bore x 2.0" rod
(102 mm x 51 mm)
Dump Cylinder EJC 6.5" bore x 3.5" rod
(165 mm x 89 mm)
Pressure Settings
Main relief 15.2 MPa 152 bar 2200 psi
Bucket dump 5.5 MPa 55 bar 800 psi
Bucket roll back 17.2 MPa 172 bar 2500 psi
Lift arms raise/lower 17.2 MPa 172 bar 2500 psi
Hydraulic oil tankcapacity
114 l 30 US gal.
Main Components
Pressure accumulator Piston type with charge valve
Electrical Equipment
Alternator 24 V 35 A min.
Batteries 2 x 12 V, 950 CCADriving and working lights 2 front, 2 rear
Distribution
Manual Type Customer Market Area
Spare parts manuals 3 Copies 1 Copy
Operators manual 3 Copies 1 Copy
Service manual 3 Copies 1 Copy
Available Alternative EquipmentMotor Alternative voltage and frequencies are
available upon request. Voltage and
frequency may effect cable type and length.
Alternative Bucket Options
Rock
Buckets
Volume Width
1.0 m 1.25 yd 1345 mm 53 in
1.3 m 1.75 yd 1422 mm 56 in
1.5 m 1.9 yd 1473 mm 58 in
Ejector
Buckets
Volume Width
1.0 m 1.25 yd 1422 mm 56 in
Available Add-On Options
Quick disconnect system (QDS) -
master hitch
Quick
disconnect
system (QDS)
- master hitch
QDS
bucket
1.1 m 1.5 yd QDS bucket
QDS pallet forks QDS pallet
forks
SAE, ROPS/FOPS canopy SAE, ROPS/
FOPS canopy
http://www.ejc.sandvik.com/http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
4/8
Tec
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
EJC 65E
Tractive Effort Curve (Metric Units)
0
5
10
15
20
25
30
35
40
45
50
55
60
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Speed (km/h)
Tractive
Effort(kN)
Rol
30%
20%
15%
10%
5%
0 2 4 6
GRADE
Empty
EJC 65 Electric
TRANS:Payload:
9.00 X 20, 18 PLY XMD2
12D0840AXLES:
TIRES:2950 kg
Rexroth AA4V56Hydrostatic
MOTOR: 600V, TEAO, 60 Hz
http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
5/8
Tec
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
EJC 65E
Tractive Effort Curve (US Units)
0
1
2
3
4
5
6
7
8
9
10
11
12
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Speed (mph)
Trac
tiveEffort(klbf)
Rolling Resista
Empty
0 2 4 6 8
30%
20%
15%
10%
5%
30%
20%
15%
10%
5%
GRADE
EJC 65 ElectricMOTOR:
TRANS:
Payload:
9.00 X 20, 18 PLY XMD2
12D0840AXLES:
TIRES:
6500 lbs
600V, TEAO, 60 Hz
Rexroth AA4V56
Hydrostatic
http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
6/8
Tec
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
EJC 65E
Productivity Curve (Metric Units)
EJC 65 ELECTRIC PRODUCTIVITY CURVE
0
20
40
60
80
100
120
140
160
180
200
0 40 80 120 160 200 240 280 320 360 400
ONE WAY DISTANCE IN METRES
TO
NNES
PER
HOUR
0% 10% 15% 20%
Basic data for calculations:
Payload KG
Overall Speed limit km/h
Fixed Cycle time min
Fixed cycle time includes the time for filling, dumping, turning and accelerating
Slope/Grade (%) Hor./0 1:10/10 1:7/15 1:5/20
Loaded speed (km/h)
Empty speed (km/h)
2948
10
0.5
10
4.55.75
10
7.75
1010
10
http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
7/8
Tec
Sandvik Mining and Construction Canada Inc.4445 Fairview Street, Burlington Ontario, Canada L7L 2A4Tel.: (905) 632-4940
EJC 65E
Productivity Curve (US Units)
EJC 65 ELECTRIC PRODUCTIVITY CURVE
0
20
40
60
80
100
120
140
160
180
200
220
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300
ONE WAY DISTANCE IN FEET
TONS
PER
HOUR
0% 10% 15% 20%
Basic data for calculations:
Payload lbs.
Overall Speed limit mph
Fixed Cycle time min
Fixed cycle time i ncludes the time for filling, dumping, turning and accelerating
Slope/Grade (%) Hor./0 1:10/10 1:7/15 1:5/20
Loaded speed (mph)
Empty speed (mph)
6500
6.2
0.5
6.2
2.83.6
6.24.86.26.2
6.2
http://www.ejc.sandvik.com/ -
7/29/2019 EJC65E
8/8
Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
We make it possible
Web: http://www.sandvik.com