EHEDG TRIPLE 0,8 Tubes and fittings

Key supplier to the food and pharma industries for more than 140 years

EN

M a s t e r i n g P u r i t y

<0,8 <0,8 <0,8

FOOD-SAFE PRODUCTION

• EHEDGcertifiedtubesandTRIPLE0.8fittings(Ra<0,8µm)

• TubesandfittingscleanableaccordingtoEHEDGspecifications

• EN10357SeriesA-EN10357(DIN11850PracticeBasedSizes)

• ConformitystatementCE1935/2004

• Internalandexternalroughnessmentionedonthematerialtestreport(MTR)

• EN10204-3.1

• Tubesandfittingsdirectlyavailablefrom

stock

Technical specs• Internalroughness:<0,8µm• Externalroughness:<0,8µm• Roughnessontheweldarea:<0,8µm• Annealedtubesandfittingsannealedafter

forming• Onlyavailableinquality316L• Orbitalwelding:fittingswithstraight

endsdirectlyavailablefromstock

INOXCO EHEDG TRIPLE 0.8 - a complete product range without compromisesVerystricthygienicrulesimpedethatfoodorpharmaceuticalproductsbecomeunhealthyorunsafeduringtheproductionprocess.Excellentcleanabilityofstainlesssteelcomponentsiskey.Thereforeasmoothsurfaceofthestainlesssteelcomponentsthatareusedintheproductionlineisrequired.TheINOXCOEHEDGTRIPLE0.8rangeguaranteesaninternalandexternalroughnessandroughnessontheweldareaofRa<0.8µm.

TheINOXCOEHEDGTRIPLE0,8productrangeincludes:• Tubes • Fittings(weld)• Butterflyvalves

• Reducers• Ferrules• Couplings

• Bends• Tees• Hollowcaps

Advantages• Complete product range tubes (EHEDG certified) and fittings• For a safe and hygienic production accordingtothefood-safetyregulations• Significant lower cost of ownershipasaresultofreduced costs for maintenance, less energy

consumption (shorter cleaning cycles) and less consumption of detergents• Extreme traceability:bothmarkingonthecomponentasonthecertificate• Improved cleanability thankstotheextremesurfacesmoothness• Hygienic packaging and stockage• Reduced risk of contamination and corrosion• Directly available from stock

< 0,8

< 0,8< 0,8

Roughness on the weld Ra < 0,8 µm Weld factor V=1 The weld is as strong as the rest of the surface and equals the strength of a seamless tube.

Internal roughness Ra < 0,8 µm Reduces contamination risk and improves cleanability.

External roughness Ra < 0,8 µm

Reduces the contamination risk from outside by prevent-ing dirt from getting a grip on the surface (for example when opening the tube).

<0,8 <0,8 <0,8

Surface treatment

Unfurl Shaping

Welding

Eddy Currentinspection

Rolling

Polishing

Heat treatment

Eddy Currentinspection Dimensioning BD inspection Cutting Polishing Working the ends Ultrasone cleaning Drying Packaging

Bending Shaping Passivation

Ultrahygienic production process

Thestate-of-the-artproductionprocessofINOXCOEHEDGTRIPLE0,8tubesandfittingsguaranteesanoutstandingqualitylevel.

FOOD-SAFE PRODUCTION

Only available in 316L

INOXCO EHEDG TRIPLE 0,8 tubes and TRIPLE 0,8 fittingsareonlyavailableinstainlesssteel316L.Thisausteniticchromium-nickelstainlesssteelqualityofffersasuperiorcorrosionandheatresistancecom-paredtootherqualities.

Other EHEDG products available:

• EHEDGbutterflyvalve:weld/weld,weld/thread,thread/threadavailablebothin304Land316L;standardEPDMseal(siliconeandvitonalsoavailable);2way-positioninghandle,optionallyextendablewithactuatorandindicationunit

• EHEDGsprayballs• EHEDGconformity:membranepump,lobepumps,centrifugalpump

5100116532/100

Messer: Gillain & Co nv/saLoad No. 5100116532Customer Order No. A1401045-2Customer Part No. BR369004HDGKL Part No. A1480001GG0000534W Part Description. EN10357 BD WLD TUBING 53X1.5 316LMaterial. 316LQuantity. 336.00 M Date of Certificate. 2014.06.23 Cert. No./Job No. 0000348810

Raw Material Specification (weight%) Heat Number C Si Mn P S Ni Cr N Mo Material Standard

S641598 0530 0.020 0.500 1.380 0.033 0.001 10.080 16.580 0.012 2.100 EN10357:2013/EN10217-7 1.4404

Mechanical Test

Heat Number Yield Rp 0.2 Yield Rp 1.0 Tensile Strength Hardness

Reduction

of Area

Elongation

( l ) Impact Test

MPa

(N/mm2)KSI

MPa

(N/mm2)KSI

MPa

(N/mm2)KSI HB/HRB/HV % % 20℃-J

S641598 0530 365.000 52.925 N/A N/A 640.000 92.800 126.600H B N/A 51.000 N/A

Mechanical Test Continuation Heat Number Eddy Current Test Flaring

Test

Flattening

Test

Bend Test Intergranular

Corrosion Test

S641598 0530 OK OK OK OK OK

Other Analysis And Inspection Visual &

Dimensional Test

Material

Identification Test

Ra Max Value

(ID/OD)

OK OK 0.42/0.70 Certificates of Compliance: KINGLAI is authorized by the ASME for the fittings and tubing in according with ASME BPE 2012, certificate number is BPE-104 We certify that this information is a true representation of the data that has been furnished by our raw material. We have no knowledge of any mercury of low melting contamination. Examined according to quality system BS EN ISO 9001:2008 by BSI. Certification number:FM 85641.All products have heat treatment process except some specified products per customer order, the temperature is 1040~1100℃, and air cooling This certificate was made by use of a computer system and is valid without signature. The materials listed herein have been tested for radioactivity and the tests confirm that the values are within the limits of the backgroundradiation.

Traceability

• Permanentmarking:heatnumber,dimensions,surfacefinish,material,executionnumber• Markingbothontubesandfittingsaswellasonmaterialtestreports(MTRs)

INOXCO EHEDG TRIPLE 0,8 - a complete product range without compromises

Internal/external roughness In this example the maximal internal Ra is 0.42/0.70 µm

316L The EN10204-3.1 MTR mentions the stain-less steel quality.

Heat number The MTR clearly mentions the heat num-ber.

Standard

Excecution number The execution number is permanently marked on the component.

ClearmarkingsontheinoxcoEHEDGTRIPLE0.8componentsandMTR(MaterialTestReport)ensurethattheINOXCOEHEDGTRIPLE0.8partsareeasilytraceable.

<0,8 <0,8 <0,8

Price quote or more info?

+32 3 870 60 80

+32 3 870 60 89

advice@gillain.com

www.gillain.com

Packaging and storage

Food-safecomponentsmustnot only be manufactured according to the most stringent criteria,theyalsohavetobehandled, packed and stored in optimal circumstances.Gillain&Cosetsthehigheststandardsforstorageandmanipulationofstainlesssteeltubingandpartsbystoringinadryanddust-freewarehouse.INOXCOEHEDGTRIPLE0,8tubesareseparately packed in plastic film.Tubeandcomponentends are covered with plastic end-caps.Thispreventscorrosionandtheinfiltrationofimpurities,insectsandbugsintheunprotectedopeningsofthepartsduringtransport.

M a s t e r i n g P u r i t y

OUTSIDEDIAMETER

(MM)

WALLTHICKNESS

(MM)

NOMINALOUTSIDEDIAMETER

NOMINALWALLTHICKNESS

13,00 1,50 DN10 Range2

19,00 1,50 DN15 Range2

23,00 1,50 DN20 Range2

29,00 1,50 DN25 Range2

35,00 1,50 DN32 Range2

41,00 1,50 DN40 Range2

53,00 1,50 DN50 Range2

70,00 2,00 DN65 Range2

85,00 2,00 DN80 Range2

104,00 2,00 DN100 Range2

EN10357SeriesA(DIN11850Range2)-316Lannealedandout-sidepolished

Price quote or more info?

+32 3 870 60 80

+32 3 870 60 89

advice@gillain.com

www.gillain.com

INOXCO EHEDG TRIPLE 0,8

<0,8 <0,8 <0,8

© G

illa

in &

Co

EH

ED

G_

20

15

09

21

OUTSIDEDIAMETER

(MM)

WALLTHICKNESS

(MM)

NOMINALOUTSIDEDIAMETER

NOMINALWALLTHICKNESS

28,00 1,50 DN25

34,00 1,50 DN32

40,00 1,50 DN40

52,00 1,50 DN50

EN10357(DIN11850PracticeBasedSizes)-316Lannealedandoutsidepolished(BD)

Stay tunedReceive our bi-monthly newsletter directly in your mailbox. Register via www.gillain.com

REF2

0171

128