efficient street lighting - induction technology
DESCRIPTION
Street lighting based on induction technology is efficient, economical and low in maintenance.TRANSCRIPT
Biogas
Induction technology
Efficient street lighting
item internationalA-4021-LinzHollabererstraße 4Phone: +43 (0) 732 668271-0Fax: +43 (0) 732 668271-270Email: [email protected]
In the field of lighting engineering induction illuminants are an innovation, because they are economically unri-valled based on life span and energy efficiency.
The essential advantage of induction technology is, that each streetlight luminaire with an E27 or E40 base can be retrofitted to induction technology.
Therefore substantial well preserved illuminaires or illuminaires that empha-size the character of the city can be preserved and hence avoiding more expenses.
Alternatively existing lighting systems can be replaced by exchange of the luminaire heads.
Compared to products in the area of street lighting available on the market today, the induction technology fulfills all criteria of an economic and efficient illumination:
high energy efficiency low acquisition costs low maintenance costs variable light color
Efficiently and economically
Economical advantages
Amortisation time less than one year
Up to 50 % energy cost savings compared to sodium vapor lamp
Significantly reduced cleaning intervals of luminaire heads due to a minimal share of ultra-violet, therefore attracting less insects
Low acquisition and maintenance costs
Technical advantages
Lifetime of more than 60,000 hours (equal to 15 years by 4,000 hours operation per year )
Power factor: cos ϕ 0.96
Light quality: CRI/Ra >80 (improves better recognition of contours and provides sharper vision)
Available in color temperatures from 2,700 to 7,000 °Kelvin High switching capability, flicker-free due to high operating frequency Instant start due to high performance electronic
Stable luminous flux at temperatures from -25 to +40 °C
Small decrease of luminous flux over lifetime, max. of 30 % after 56,000 hours of operation
Induction compared to other techologies
Survival rate and drop in illuminance flux
Solution
A reduction in power by using the induction technology is compensated through an optimised light output of the visible light (pupil lumen)
Flexible and low maintenance
HME HSE LMTC Induction
Illuminant 80 W 70 W 42W 40 W
Connected load per luminaire 90 W 83 W 42W 42 W
Number of luminaires 1,000 units 1,000 units 1,000 units 1,000 units
Total connected load 90 kW 83 kW 42 kW 42 kW
Energy costs 0.18 €/kWh at 4,000 h/a 64,800 € 59,760 € 30,240 €
Lifetime 20,000 h 18,000 h 15,000 h 60,000 h
Replacement costs per light spot (including personnel costs)
30 € 30 € 30 € 30 €
replacement cycle 5 years 4.5 years 3.75 years 15 years
Observation period 15 years
Average proportionate costs p.a. 6,000 € 6,667 € 8,000 € 2,000 €
Total costs p.a. 70,800 € 66,427 € 38,240 € 32,240 €
Total savings p.a. 4,373 € 32,580 € 38,560 €
6 % 46 % 54 %Color spectrum NAV
Color spectrum Induction