NEW CHAINSAW MT 350 S MT 3500 S

Chainsaw designed to provide a reliable and eco-

compatible solution for home users for limbing and

pruning, cutting small-medium diameter trunks

and general firewood duties.

Developed using technology associated with higher

category chainsaws, this model incorporates several

technical features that enhance quality and cutting

performance while guaranteeing compliance with anti-

pollution regulations. The new engines, designed to

limit noise levels and the emission of unburnt

hydrocarbons (HC + NOx), ensure low running costs

and environmental respect.

Carburettor installed on 4 antivibration mounts: improved stability and more reliable use of the tool.

Nickel-plated cylinder, aluminium breech, forged and machined 3-piece steel crankshaft and connecting rod, big end roller cage, small end roller bearing.

Large size sponge + cloth air filter: guarantees high filtration efficiency and easy maintenance.

Primer device: boosts the fuel flow to the carburettor to facilitate cold starts, starts after refuelling, and starts after long periods of disuse.

New automatic constant flow rate oiler: the oiler operates only when the chain is running. so no oil used unless the tool is actually cutting.

NEW CHAINSAW MT 350 S MT 3500 S

Naturally advancedA series of design features optimize the practicality and ease of use of the tool, allowing anyone to work with the chainsaw with confidence.

Transparent tanks: oil and fuel levels checked at a glance.

Antivibration system composed of 3 spring-type and 3 rubber shock absorbers: protect operator from vibration to ensure enhanced levels of comfort.

On-Off switch and choke incorporated in a single multifunction lever: guaranteed practicality and ease of use.

Large size ergonomically shaped inertia brake lever mounted to crankcase at two points: designed to ensure correct brake activation in all working conditions and positions.

The illustrated step-by-step start-up instructions ensure quick and safe starting, even for inexpert users.

TECHNICAL DATA. Power/Displacement 2.0 HP - 1.5 kW/38.9 cm3

. Bar length 35-41 cm / 14”-16”

. Chain (pitch x gauge) 3/8” x .050”

. Oiler automatic

. Oil reservoir / fuel tank capacity 0.26 L / 0.36 L

. Weight 4.4 Kg

3085

422

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) ItalyTel. +39 0522 956611 • Fax +39 0522 951555info@myefco.com • www.myefco.com

NEW CHAINSAW MT 350 S MT 3500 S

www.youtube.com/MyEfco