educational and educational … wall chart no. 1214 edp 56605 suited for factory-machine areas and...

J.W. DONCHIN CO. 4841-43 W. Chicago Ave. • Chicago, IL 60651-3224Ph: 773-261-2182 • Fax: 773-261-2867 • [email protected] • www.jwdonchin,com

EDUCATIONAL AND EDUCATIONAL MATERIALSContents

Page Description

641 VOCATIONAL AND EDUCATIONAL MATERIAL

642 Videos

Outside Micrometer No. 1716

Combination Square No. 1722

Combination Set No. 1719

Vernier Height Gage No. 1731

Vernier Caliper No. 1728

Bevel Protractor No. 1725

Complete Tool Training Series No. 1732

643 Tools & Rules for Precision Measuring No. 1734

Tools & Rules for Precision Measuring

The Starrett Book for Student Machinists No. 1700

The Starrett Story No. 1216 EDP 56601

644 Training Aid Kit No. 1701

Educational Charts Set of 18

Wall Size No. 1702 18 5/8 x 14 5/8 (473 x 371mm)

Three-Ring Notebook Size No. 1715 11 x 8 1/2 (280 x 216mm)

645 Inch/Metric Tap Drill Sizes and Decimal Equivalents Card

Millimeter/Inch Equivalents Card

Wall Chart No. 1214 EDP 56605

Tool Sets No. S904Z

The L.S. Starrett Company hascontinually, throughout its history,offered instruction materials to assist inteaching metrology principles. Wecontinue to offer a number of theseitems in reasonable quantities at nocharge. The balance of the aids areavailable at reasonable prices.

◆ Videos◆ Training Aid Kit◆ Publications◆ Charts◆ Reference Cards

VOCATIONAL ANDEDUCATIONAL MATERIAL

642

Vernier CaliperNo. 1728◆ Outside Measurements◆ Inside MeasurementsThis demonstration shows how to hold and use a caliper with 50-division vernierplate, how to adjust slide, make fineadjustments and lock slide in final position,setting the caliper to various readings,measuring actual workpiece inside andoutside diameters, slot widths and overall dimensions.

Bevel ProtractorNo. 1725This video illustrates how to set and usescale of degrees, setting acute and obtuseangles, measuring an unknown angle,laying out angles, transferring angles fromdrawing to work, setting work at verticalangle, using spirit level, setting work on

fixture, vise on milling machine and shaft individing head, and checking workdimensions after machining.

Complete Tool Training SeriesNo. 1732One complete Tool Training Series. All sixindividual tool videos have been combinedon a single tape.

◆ Outside Micrometer◆ Combination Set◆ Combination Square◆ Bevel Protractor◆ Vernier Caliper◆ Vernier Height Gage◆ VHS format ◆ 78 minutes running time

VideosStarrett training videos are ideal forindividuals or training classes. Six videostake students through extensive step-by-step use and care of precision measuringtools and include hands-on demonstrations.Available individually, or as one video withall six tapes combined.

◆ VHS format◆ 12 1/2 minutes running time

Outside MicrometerNo. 1716This presentation shows and demonstratesthe principle parts, zero setting andtensioning, holding, cleaning of measuringfaces, opening rapidly, developing “feel,”using screw thread to obtain linearmeasurements, decimal equivalents,reading to .001� and .0001�, and correcthandling and storage of the outsidemicrometer.

Combination SquareNo. 1722This presentation demonstrates the settingof readings on blade, scribing lines, crosslines, 45º angles on work, transferringmeasurements, locating hole centers, usingas height gage, setting up work on angleiron, checking alignment of assembled part,locating work in drill press vise, lining upmilling machine vise and inspectingmachined part to shop drawing.

Combination SetNo. 1719This presentation shows and demonstratesthe principal parts, assembling square headto blade, reversibility of square head onblade, 90º and 45º angles, spirit level, built-in scriber, blade graduations, reversiblelock bolt, assembling center head to blade,finding center of round stock, assemblingprotractor head to blade, reading anglesand locking turret.

Vernier Height GageNo. 1731This presentation defines the main parts ofthe vernier height gage and vernierprinciple, how to read in the English andmetric systems, layout and inspectionprocedures plus tests on readings in inchesand millimeters.


Description Catalog No. EDP No.

Video, Outside Micrometer 1716 55897

Video, Combination Set 1719 56093

Video, Combination Square 1722 56095

Video, Bevel Protractor 1725 56097

Video, Vernier Caliper 1728 56340

Video, Vernier Height Gage 1731 56438

Video, Tool Training Series on One Tape 1732 64435

NOTE: Videos are priced items.

643

Tools & Rules forPrecision MeasuringNo. 1734The “Tools and Rules” VHS cassette can bepurchased and is also available on a loanbasis for a short period of time FREE OFCHARGE. Only the return postage isrequired. Fax or write to The L.S. StarrettCompany on your company or schoolletterhead stating date required.

Features:◆ History of precision measuring◆ Simplified instruction on how to read, use

and care for precision measuring tools

◆ Instruction is by voice, hands-ondemonstrating and technique by whichscreen close-ups are shownsimultaneously with demonstrations

◆ VHS format ◆ 38 minutes running time


Video, Tools and Rules for Precision Measuring 1734 57123

NOTE: Available for purchase or on a loan basis.


measuring tools; dial indicators; layout withaccuracy; measuring lathe work; measuringscrew threads; facts about fit; limits oftolerance; introduction to electronic tools;new precision measuring tools; and alsoincludes eight pages of helpful referencedata – decimal equivalents, squares, cubes,square and cube roots, tap drill and screwthread information. A valuable aid for everytraining program. Size 5 1/4� x 7 5/8�(133 x 200mm) 73 pages with over 150 illustrations.

Tools & Rules forPrecision MeasuringA valuable aid for every training program,this comprehensive, illustrated booklet tellsthe story of precision measurements in asimple, down-to-earth way that appeals toall levels of students. The booklet containsinformation on: linear measuring standards;measuring and transferring measurements;steel rules; calipers and dividers; how toread vernier tools and the micrometer; typesof micrometers; gage blocks and digital


Booklet, Tools and Rules for Precision Measuring 1211 56604

NOTE: Available on request at no charge.

The Starrett Book forStudent MachinistsNo. 1700This familiar handbook for machine shopbeginners is written in clear, simplelanguage, contains 160 pages including200 diagrams, illustrations, referencetables, and is fully indexed. Printed oncoated paper with soil-resistant bindingfor durable machine shop use.

Chapter Headings: Mechanical Drawings;Fits and Terminology; Bench Work; How toMake Measurements; Cutting Speed andCutting Fluids; Drilling and RelatedOperations; Lathe Operations; Grinding;Metal Sawing; Toolmaking; Geometry;Mechanics.


The Starrett Book for Student Machinists 1700 53218

NOTE: Book is a priced item.

The Starrett StoryNo. 1216 EDP 56601

A brief history of the Starrett company which wasfounded over 125 years ago by an early mechanicalgenius, Laroy S. Starrett. It reviews the founder’sboyhood years, business problems and successes,tools introduced, personal philosophy andcommunity service. A fascinating story of ambition,perseverance, accomplishment and contribution toindustry and hisfellow man.

Size 4 5/8� x 6 7/8� (117 x 175mm),36 pages with over 50 illustrations.

644

Training Aid KitNo. 1701Kit consists of four slide charts showinghow to read the following: outsidemicrometer; vernier caliper; vernier heightgage with 50-division vernier plates; and avernier protractor. Each tool is printed full-size on rugged card stock. The studentadjusts each chart by moving a die-cut


Training Aid Kit (4 Slide Charts) 1701 53219

NOTE: Kit is a priced item.

slide or disc to any desired setting to obtainreadings as though using the actual tool.“How to Read” instructions are printed onthe back of each chart.


Educational ChartsSet of 18

Wall Size No. 1702 18 5/8� x 14 5/8�

(473 x 371mm)

Three-Ring Notebook SizeNo. 1715 11� x 8 1/2�

(280 x 216mm)

Eighteen whiteprint charts help learnersrecognize basic tools, their principal partsand uses. Tools illustrated: outside andinside micrometers; micrometer depthgage; vernier caliper and height gage;electronic micrometer and caliper; hookrule; combination square and bevelprotractor; dial indicator and dial testindicators; dial caliper; magnetic baseindicator holders; surface gage; machinists’vise. The set includes sheets on “How toRead Metric Measuring Tools” and “Howto Read English Measuring Tools.” The No. 1702 and No. 1715 are identical except for size. The notebook size is 3-hole punched.

Description Size Catalog No. EDP No.

Set of 18 charts18 5/8� x 14 5/8� (473 x 371mm) 1702 56172

11� x 8 1/2� (280 x 216mm) 1715 53220

NOTE: Charts are priced items.

645

Wall ChartNo. 1214 EDP 56605

Suited for factory-machine areas and toolcribs, as well as classroom use. Charts arepacked one per tube.

Note: Charts are available for a nominal fee.

number size drills (1-80); drill sizes forstandard taps from #0-80 to 1 1/2-12(approximately 65% thread); and pipe taps from 1/8-27 to 4-8. Metric tap/drillsizes section. Printed on two sides in red and black. Pocket size 3� x 5� (75 x 125mm).

Inch/Metric Tap DrillSizes and DecimalEquivalents CardCard shows decimal equivalents of 8ths,16ths, 32nds and 64ths of an inch; decimalequivalents of letter size drills (A-Z) and


Decimal Card 1317 56607


Millimeter/InchEquivalents CardCard shows millimeters to decimalsequivalents from 0.01 mm to 100mm (.0004�-3.9370�); decimals-to-


Metric Card 1318 56608


millimeters from .001� to 1.00�(0.03-25.40mm); and fractions-to-decimals-to-millimeters from 1/64� to 1� (0.40-25.40mm). Printed on two sides inred and black. Pocket size 3� x 5� (75 x 125mm).

Tool SetsNo. S904ZStarrett offers tool sets for students andapprentices. Sets include the basic inch-reading or millimeter-reading toolsnecessary for practical shop work andstudy. For detailed information, refer to the Tool Sets Section beginning on page239.

NOTE: Tool sets are priced items.

Inch/Metric Tap Drill Sizes andDecimal EquivalentsDecimal equivalents of 8ths, 16ths, 32ndsand 64ths of an inch; decimal equivalentsof letter size drills (A-Z) and number sizedrills (1-80); drill sizes for standard tapsfrom #0-80 to 1 1/2-12 (approximately65% thread); and pipe taps from 1/8-27 to 4-8. Metric tap/drill sizes section.Size 25� x 41 1/2� (635 x 1054mm).

No. S904Z Apprentice Tool Set.


J.W. DONCHIN CO.Precision Measuring Equipment and Industrial Supplies since 1924.

www.jwdonchin.com

4841 W. Chicago Ave. - Chicago, IL 60651 • Phone: 773-261-2182 • Fax: 773-261-2867 • [email protected]

J.W. DONCHIN CO.

J.W. Donchin Co. was established in 1924 and has been known world wide ever since. Customer Service is our Main Focus. We offerExpert Product Knowledge, Large Stocking Inventory and Competitive Pricing to assist you in locating and selecting the correcttool or product to fit your needs. (J.W. Donchin Co. is one of L.S. Starrett’s largest stocking distributors.)

Contact Information:

Phone: 773-261-2182

Fax: 773-261-2867

Email: [email protected]

Direct Access Links (View specific information, click on any of the following)

• Latest Website Updates:

• Website:

• Quotes:

• Latest Promos:

• Line Card (Product Lines & Mfg)

Catalog / Promo / Pricelist

• Starrett

• Mitutoyo

• Fowler

• Brown & Sharpe

educational and educational … wall chart no. 1214 edp 56605 suited for factory-machine areas and...

Documents