ecco product guide
DESCRIPTION
Ecco Product GuideTRANSCRIPT
PRODUCT GUIDE
2008
warning lights back-up alarms camera systems
Our CommitmentOur consuming passion is to provide you with products and service of outstanding value; so outstanding that you are delighted by every contact with our people and products.
To support this passion we have dedicated our resources to innovative products, quality manufacturing processes, and world-class customer service. We are dedicated to supporting your business and profitability as if it were our own.
Whether you are an old friend or a first-time buyer, you have our word that we are totally committed to exceeding your expectations. If we ever fall short, please let us know.
President & Chief Operating Officer
Chris Thompson
Toll Free: 800-635-5900Direct: 208-395-8044E-Mail: [email protected]
All of us pictured above look forward to fulfilling this commitment to you.
Chief Executive Officer
Ed Zimmer
Toll Free: 800-635-5900Direct: 208-395-8050E-Mail: [email protected]
1
introduction
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Contents Lighting Symbol GuideLIGHT SOURCE SYMBOLS
SAE CLASS METER
Class I Meets SAE Class I(All Class I lights meet SAE Class II & III)
Class II Meets SAE Class II(All Class II lights meet SAE Class III)
Class III Meets SAE Class III
NOTE: Where a symbol shows Class I and II, the product features self adjusting (Smart Strobe®) operation and the lower intensity mode meets Class II.
ROTATOR Indicates 360° rotating halogen lights
STROBE Indicates gaseous discharge strobe lights (Xenon)
FLASHERS Indicates either incandescent or halogen solid state flashers
LED Indicates LED (Light emmitting diode) lights
™BEACONS
LED Beacons 3-7, 14, 16Strobe Beacons 8-13, 15, 17-18Rotating Beacons 19-21
LIGHTBARS / MINIBARS
Lightbars 23-30Minibars 31-41
SAFETY DIRECTOR™
Safety Director™ 42-43
LED DIRECTIONAL LIGHTS
LED Directional Lights 44-51
LIGHTING SYSTEMS
Remote Strobe Systems 52-54Remote Strobe/LED Systems 55-57
BACK-UP ALARMS
Back-Up Alarms 61-71 Warning Alarms 72-74Switches & Bulbs 75
CAMERA SYSTEMS
Camera Systems 77-85
ACCESSORIES & REPLACEMENT PARTS
Lenses & Domes 86-88Mounting Hardware 89Bulbs, Tubes, Lamps, Belts,Reflectors & Filters 90-91Switches 92
POINT OF PURCHASE DISPLAYS
POP Displays 93
TECHNICAL SPECIFICATIONS
Beacon Mounting Guide 94Technical Specifications 94-95
INDEX Part Number Index 96
Profile Inside back Cover
BeaconsSee pages 3-7 & 14 for six new LED beacons included in this guide. Our 7100 Series – Reflex™ beacon features reflector technology, multiple flash patterns, synchronization capability and meets SAE Class I and California Title 13 requirements. The 7400 Series – Profile™ beacon also features a LED/Reflector design in a single flash pattern light that is highly compact yet offers SAE Class I light output. The 7600 Series – RotoLED™ beacon features a hybrid LED/Rotator design, offering the best of both worlds, as well as meeting SAE Class I. The new SAE Class II 7940 and 6460 Series industrial LED are additions to existing popular light series.
MinibarsTwo LED additions to the minibar line are featured on pages 38-39. The 5180 Series – Blaze® II is an addition to our highly popular low profile line while the all new 5280 Series - RotoLED™ features hybrid LED/Rotator technology. Both meet SAE Class I requirements.
Directional LightsSee page 46-47 for two new additions to the 3700 Series product line, a California Title 13 approved, 3760 grommet mount model, and a smaller 3730 model. Both offer similar functionality to the original 3710, the 3760 meets SAE Class I while 3730 meets Class II. Further additions are the 9010 & 9011 Series – HIDE-A-LED™ concealed warning lights on pages 50 & 51 that eliminate the need for remote power supplies and offer multiple flash patterns and synchronization capability.
Camera SystemsECCO’s new Gemineye™ line of camera systems is featured on pages 76-85. Choose from 3 sizes of LCD monitor from 3.5” up to 7.0” widescreen, 5 camera styles including automatic shutter and eyeball models as well as controller and DVR options. Gemineye™ Camera Systems offer a configuration to suit any application.
Back-Up AlarmsThe SVX™ focused sound back-up alarm uses SoundVector™ technology to focus the warning signal where it is needed at the rear of the vehicle, retaining the universally recognized BEEP-BEEP sound while minimizing noise pollution in the surrounding area. See pages 60-61.
Welcome to ECCO’s 2008 Product Guide, within this catalog you will find our full line of products displayed in what we hope you will find an easy to reference format. Of special significance in this guide is the exciting line up of new products available this year.
Products In This Catalog
AMECA Certification - ECCO's Engineering Test Lab is certified by the Automotive Manufacturers Equipment Compliance Agency (AMECA) to perform testing on warning lights per the Society of Automotive Engineers (SAE) requirements. ECCO test reports are reviewed by AMECA and a Notice of Equipment Compliance is issued which is then noted here as AMECA certified.
LED HYBRID Indicates 360° LED/Rotator hybrid lights
™
2
beacons – introduction
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
™
’S LINE OF BEACONSECCO offers a beacon to suit any user application, on or off road, industrial or agricultural we have the product to suit your needs. Strobe, rotator, LED and incandescent versions are avail-able with a variety of intensity, flash rate and mounting options to choose from.
7100 Series
SAE Class I, Title 13, CE, e 12-24 VDC3 Bolt / 1” Pipe / Vac MagMulti Flash, Hi/Lo Intensity, Sync5 year warranty
™
6900 Series
SAE Class I, CE, e12-24 VDC3 Bolt / 1” Pipe / Mag / Vac MagSmart, Double/Quad, Hi/Lo Intensity2 year warranty
7600 Series
SAE Class I, Title 13, CE, e, E12-24 VDC3 Bolt / 1” Pipe / Vac Mag120 FPM LED Hybrid Rotator5 year warranty
6500 - J Bolt
SAE Class II, CE, UL12-48 VDCJ Bolt / Flush / Mag / ¾” Pipe / 1” PipeSingle/Double or Triple/Quad2 year warranty
6600 Series
SAE Class II, CE, e12-24 VDC3 Bolt / 1” Pipe / MagSmart, Double/Quad, Hi/Lo Intensity2 year warranty
5800 Series
SAE Class I, CE, e, E12 VDC1 Bolt / 1 Bolt Flexi / 3 Bolt / Pole / Flexi Pole / Mag / Vac Mag160 FPM Belt Drive Rotator1 year warranty
6200 Series
CE, e, UL12-80 VDC, CE, e, UL2 Bolt / ½” Pipe Quad (LED), Single (strobe)5 year warranty
™
7400 Series
SAE Class I, CE, e12-36 VDC3 Bolt / 1” Pipe / Vac MagFlickerflash5 year warranty
™
6700 Series
SAE Class II, CE, e12-24 or 12-48 VDCAluminum or Nylon Base3 Bolt / 1” Pipe Double/Quad2 year warranty
7900 Series
SAE Class I or Class II, CE, e12-24 VDC3 Bolt / 1” Pipe / Vac MagDouble/Quad, Hi/Lo Intensity5 year warranty
™
6400 Series
CE, e, UL12-80 VDC3 Bolt / MagFlicker/Rotate (LED), Single (strobe)5 year (LED) 6 month/2 year (strobe) warranty
6500 Series
SAE Class II, CE12-48 VDC3 Bolt / 1” Pipe / Mag / Vac MagDouble/Quad2 year warranty
5700 Series
SAE Class I 12 or 24 VDC3 Bolt / 1” Pipe / Vac Mag100 FPM Gear Drive Rotator2 year warranty
6000 Series
SAE Class II,12-24 VDCToggle BoltDouble/Quad2 year warranty
Page 3
Page 8 & 9Page 5
Page 13Page 11
Page 20 & 21
Page 16 & 17
Page 4
Page 10Page 6 & 7
Page 14 & 15
Page 12
Page 19Page 18
™
ROTOLED™
PR FILE TM
3
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
- 7160 Series
Coated aluminum heat sink is specifically designed to efficiently dissipate heat from the LEDs throughout the entire beacon base.
6.5 [165]
120ºTYP
3.9 [99] SAE Class I LED
Replace X in part number with desired lens or LED color: A = amber, B = blue, C = clear, G = green, R = red
VOLTAGE FPMAMPS3 BOLT/ 1” PIPEPART NO.
12-24 3.27160X
7160CX
Multi Flash (13): Flash intensity, flash pattern and synchronization is user selected at time of installation.
The 7160 Series - Reflex™ LED beacon provides the ultimate level of power, versatility and style available in an LED beacon. The latest high intensity LED’s combined with reflector technology produce a powerful, SAE Class I/Cal Title 13, warning signal in a light that also offers premium features includ-ing multiple flash patterns, hi/lo intensity control and synchronization capability. Low amp draw, zero maintenance and an extended life backed by a 5 year warranty make this light an obvious choice to replace strobe or rotating lights.
Eight 3-watt LED’s and reflector technology produce a high intensity warning signal.
Steady burn, Double (2), Quad, Quint, Flicker, Rotating (3), Title 13 (3), and Cycle flash patterns.
Hi/lo intensity control.
Multiple units can be synchronized.
Die cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation. Permanent mount models are sealed in epoxy for added protection.
Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ApprovalsSAE J845 Class I
California Title 13
CE, e
IP Rating 67 (3 bolt mount)
IP Rating 54 (vacuum magnet mount)
COLORLENS ILLUMINATION
CLEAR
SPECIFYCOLOR
SPECIFYCOLOR
MATCHESLENS COLOR VARIES BY
PATTERN
MATCHESLENS COLOR
VARIES BYPATTERN
SPECIFYCOLOR
12-24 3.2
7160X-VM
7160CX-VM CLEAR SPECIFYCOLOR
VACUUM MAGNET
™ Reflex™ - Multi Flash (13)
7160A
7160CX-VM
• 5 wire connection allows easy flash pattern and hi/lo intensity selection and synchronization
Eight high intensity, 3-watt LEDs com-bined with unique reflectors provide powerful 360º SAE Class I light output.
REDBLUE
R7160LRR7160LB
7160 Series Replacement PartsLens
CLEAR GREENAMBER
R7160LC R7160LGR7160LA
4
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
3.1 [79]
120ºTYP
6.4 [163]
SAE Class I LED7460 Series -
Replace X in part number with desired lens or LED color: A = amber, B = blue, C = clear, G = green, R = red
VOLTAGE FPMAMPSPART NO. COLORLENS ILLUMINATION
3 BOLT FLANGE / 1” PIPE
VACUUM MAGNET
™
7460A7460CX-VM
The compact and unobtrusive 7460 Series Profile™ LED Beacon incorporates a simple yet highly effective and robust design featuring an overhead heatsink that also allows removal of the flange when the unit is pipe mounted. The 7460 feature’s a unique ‘flickerflash’ flash pattern that human vision is highly sensitive to in the periphery, increasing potential visibility where vehicle hazards are not in direct line of sight. A 5 year warranty and the usual maintenance free, low amp draw benefits of LED technology make this an ideal light for any application.
Eight 3-watt LEDs and a parabolic reflector produce attention getting SAE Class I light output.
Human peripheral vision is highly sensitive to unique flickerflash pattern that features 8 flashes per cycle (80FPM).
Overhead heatsink design allows for unobtrusive pipe mounting with flange removed
Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ApprovalsSAE J845 Class I
CE, e
IP Rating 67
801.0
801.0
12-367460X
7460CX CLEAR
SPECIFYCOLOR
SPECIFYCOLOR
MATCHESLENS COLOR
MATCHESLENS COLOR
SPECIFYCOLOR
12-36
7460X-VM
7460CX-VM CLEAR SPECIFYCOLOR
Profile™
• Detachable flange design allows easy and unobtrusive pole mounting.
PR FILE TM
5
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SAE Class I LED Hybrid- 7660 Series
LED Hybrid technology provides a high intensity rotating warning signal with no gears, brushes or bulbs to wear out.
Eight 3-watt LED’s combined with a TIR optic produce an exceptionally bright warning beam.
Polycarbonate lens features a UV hard coating to greatly reduce cracking, hazing, abrasion and fading.
Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ApprovalsSAE J845 Class I
California Title 13 (blue & red only)
E Approved to EC R65 (amber & blue only)
CE, e
IP Rating 67
The 7660 Series RotoLED™ beacon combines all the major benefits of the latest LED’s with the unmistakable warning signal of a rotator, without compromising reliability. LED hybrid technology uses a brushless magnetic drive system to spin the reflec-tor disk, reducing noise and eliminating the typical motor/gear drawbacks associated with conventional rotators. The 7660 also features eight 3-watt LED’s and a TIR optic to provide SAE Class I light output. Additional benefits include an extended, service free life, low amp draw and a 5 year warranty.
7660A7660CC-VM
6.3 [160]
120ºTYP
6.2 [156]
Eight high intensity, 3-watt LEDs com-bined with a unique TIR optic project light onto the reflector to provide SAE Class I light output.
45º angled reflector driven by a quiet brushless magnetic drive system provides an excep-tional warning beam without compromising reliability.
Unique base design efficiently dissipates heat from the LEDs
1.712-247660X
7660CX120
120
CLEAR SPECIFYCOLOR
SPECIFYCOLOR
SPECIFYCOLOR
1.712-24
7660X-VM
7660CX-VM CLEAR SPECIFYCOLOR
RotoLED™
Replace X in part number with desired lens or LED color: A = amber, B = blue, C = clear, G = green, R = red
VOLTAGE FPMAMPS3 BOLT FLANGE / 1” PIPEPART NO. COLOR
LENS ILLUMINATION
MATCHESLENS COLOR
MATCHESLENS COLOR
VACUUM MAGNET
™
ROTOLED™
6
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Replace X in part number with desired lens or LED color: A = amber, B = blue, C = clear, R = red
VOLTAGE FPMAMPSPART NO.
3.712-247960X
7960CX
80 Doubleor
65 Quad
Double/Quad Flash: Flash Intensity and Double or Quad flash mode are user selectable via on-board switch.
Eight 3-watt LED’s provide unrivalled flash intensity
Double or quad flash operation with hi/lo intensity control
Die cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation. Permanent mount models are sealed in epoxy for added protection
Thread-on polycarbonate lens allows easy flash mode selection without tools Reverse polarity, voltage spike and surge protected
Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ApprovalsAMECA certified to SAE J845 Class I (amber and red only, blue and clear = Class II)
CE, e
COLORLENS ILLUMINATION
CLEAR SPECIFYCOLOR
SPECIFYCOLOR
SPECIFYCOLOR
MATCHESLENS COLOR
MATCHESLENS COLOR
3.712-24
7960X-VM
7960CX-VM
80 Doubleor
65 QuadCLEAR SPECIFYCOLOR
3 BOLT FLANGE / 1” PIPE
VACUUM MAGNET
™ Pulse® - Double / Quad Flash
SAE Class I LED7960 Series -
ECCO’s 7960 Series LED Beacons feature 8 of the latest high intensity 3 watt LED’s providing SAE Class I light output. Double or quad flash opera-tion and hi/lo intensity control combined with a long maintenance free service life and low amp draw make this beacon the perfect choice for both on and off-road applications. Easily replaces old rotating or strobe beacons with the latest technology so no ongoing maintenance is required.
7960A
7960CX-VM
Circuit board mounted microswitch allows easy flash pattern and light intensity selection.
Coated aluminum heat sink is specifically designed to efficiently dissipate heat from the LEDs throughout the entire beacon base.Eight high intensity,
LEDs provide 360º SAE Class I light output on 7960 model, Class II on 7940 model.
7
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SAE Class II LED - 7940 Series
Eight 1-watt LED’s provide high intensity light output
Double or quad flash operation with hi/lo intensity control
Die cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation. Permanent mount models are sealed in epoxy for added protection
Thread-on polycarbonate lens allows easy flash mode selection without tools Reverse polarity, voltage spike and surge protected
Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ECCO’s 7940 Series LED Beacons feature 8 of the latest high intensity 1 watt LED’s providing SAE Class II light output. Double or quad flash operation and hi/lo intensity control combined with a long maintenance free service life and low amp draw make this beacon a cost effective choice for many applications. Easily replaces old rotating or strobe beacons with the latest technology so no ongoing maintenance is required.
ApprovalsAMECA certified to SAE J845 Class II (amber and red only)
CE, e
Replace X in part number with desired lens or LED color: A = amber, B = blue, C = clear, R = red
VOLTAGE FPMAMPS3 BOLT FLANGE / 1” PIPEPART NO.
1.512-247940X
7940CX
80 Doubleor
65 Quad
Double/Quad Flash: Flash Intensity and Double or Quad flash mode are user selectable via on-board switch.
COLORLENS ILLUMINATION
CLEAR
SPECIFYCOLOR
SPECIFYCOLOR
SPECIFYCOLOR
1.512-24
7940X-VM
7940CX-VM
80 Doubleor
65 QuadCLEAR SPECIFYCOLOR
VACUUM MAGNET
™ Pulse® - Double / Quad Flash
7940A
7940CX-VM
REDBLUE
R7960LRR7960LB
7940/7960 Series Replacement PartsLens
CLEARAMBER
R7960LCR7960LA
MATCHESLENS COLOR
MATCHESLENS COLOR
8 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
beacons – strobe
SAE Class I Strobe
JOULESVOLTAGE FPMAMPS
2.912-24
3 BOLT FLANGE / 1” PIPE
MEDIUM
LOW
HIGH
6955X
6975X
PART NO. PROFILE
6995X
High Medium
Low
Smartstrobe®: On-board photo cell automatically adjusts flash intensity for day or night operation. Double or Quad flash mode is user selected at time of installation.
80Double
or
65Quad
10 to 15Double
or
16 to 20Quad
ECCO’s 6900 Series strobes feature our patented i.beam® LED technology. i.beam® constantly monitors circuit board and flashtube performance on each flash cycle. If the lamp fails and the circuit board LED is still flashing the user imme-diately knows that only the flashtube needs replacing.
Smartstrobe® versions feature automat-ic adjustment for day/night operating intensity and double or quad flash rate is selectable at installation. Non-smart models operate constantly at the SAE Class I output level and feature double or quad flash modes (selectable during installation).
®
6900 Series
High 6990A
Medium 6970A-MG
Low 6950A
Shock-resistant circuit board mounting incorporates 7 support points.
Die-cast aluminum base is coated against corrosion anddesigned for vibration resistance and heat dissipation.
Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.
Consistent operation during voltage and temperature changes.
Reverse polarity, voltage spike and surge protected.
Circuit board is conformal coated to prevent corrosion.
Warranty: Strobe = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
CE, e
AMECA certified to SAE J1318 Class I (amber and clear only)
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
Smartstrobe®®
®
IP Rating 54
Smartstrobe® models automatically adjust light intensity for day or night time operation using an on-board photocell to sense ambient light on each flash cycle.
Convenient snap-fit flashtube and screw on lenses means no tools are required for tube replacements.
Circuit board mount-ing incorporates 7 “pressure points” to combat vibration.
i.Beam® on-board LED diagnostic indicator constantly monitors circuit board and flashtube operation. LED illuminates on each flash cycle enabling easy flashtube fault detection.
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226 9
beacons – strobe
PART NO.
6950X-MG
6951X-MG
6970X-MG
6971X-MG
JOULESVOLTAGE FPMAMPS
2.912-24
3 BOLT FLANGE / 1” PIPE
MEDIUM
LOW
HIGH
6950X
6970X
PART NO. PROFILE
6990X
High Medium
Low
2.912-24
MAGNET
LOW
MEDIUM
80 Double
65 Quad
80 Double
65 Quad
15
20
15
20
2.912-24
MEDIUM
LOW6950X-VM
6970X-VM
80Double15
VACUUM MAGNET
Low
Low
Medium
Medium
Double/Quad Flash: Double or Quad flash mode is user selected at time of installation on 6950 & 6970 models. High intensity flash output on all models.
80Double
or
65Quad
15Double
or
20Quad
(continued) 6900 Series
GREENBLUE REDCLEAR
MEDIUM /HIGH
LOW R6050LA R6050LB
R6070LA R6070LB
R6050LC
R6070LC
R6050LG
R6070LG
R6050LR
R6070LR
PROFILE AMBER
6900 Series Replacement Parts
R6501FT
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
Flashtube Lenses
Double / Quad Flash®
®
10 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
beacons – strobe
3 BOLT FLANGE / 1” PIPE
JOULESVOLTAGE FPMAMPS
3 BOLT FLANGE / 1” PIPE
PART NO. PROFILE
Designed to meet all the harsh operational requirements of heavy mobile equipment. Both versions of the 6700 Series strobe are built to withstand the toughest applica-tions, severe vibration, pressure washing and steam cleaning. Power supplies are completely encapsulated in epoxy resin and 6750/6770 versions feature ECCO’s patented i.beam® flash technology to monitor circuit board and flashtube operation.
Severe Vibration ApplicationsSAE Class II Strobe
2.312-24
MEDIUM
LOW6750X
6770X
80 Doubleor
65 Quad
10 Doubleor
16 Quad
GREENBLUE REDCLEAR
MEDIUM /HIGH
LOW R6050LA R6050LB
R6070LA R6070LB
R6050LC
R6070LC
R6050LG
R6070LG
R6050LR
R6070LR
PROFILE AMBER PART NO.
R6501FT
Medium 6770A
Low 6710A
Circuit board is completely encapsulated in epoxy resin for protection against moisture, dust and vibration.
Choice of base types: Powder coated aluminum orreinforced nylon.
6750 and 6770 models feature i.beam® LED diagnostic indicator.
Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.
Consistent operation during voltage and temperature changes.
Reverse polarity, voltage spike and surge protected.
Warranty: Strobe = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ALUMINUM BASE
1.512-48
MEDIUM
LOW6710X
6720X
80 Doubleor
65 Quad
Medium
REINFORCED NYLON BASE
Double/Quad Flash: Double or Quad flash mode is user selected at time of installation.
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
7 Doubleor
10 Quad
Low
®Medium
Low
6700 Series
Double / Quad Flash®
Lenses Flashtube
Approvals
CE, e
AMECA certified to SAE J1318 Class II (amber and clear only)
IP Rating 54 (6750 / 6770 only)
6600, 6700 Series Replacement Parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226 11
beacons – strobe
3 BOLT FLANGE / 1” PIPE
JOULESVOLTAGE FPMAMPS 3 BOLT FLANGE / 1” PIPEPART NO. PROFILE
SAE Class II Strobe6600 Series
2.012-24MEDIUM
LOW
HIGH
6655X
6675X
6695X
Smartstrobe®: On-board photo cell automatically adjusts flash intensity for day or night operation. Double or Quad flash mode is user selectable via on-board switch.
65Double
or65
Quad
8 to 13Double
or12 to 17
Quad
2.012-24MEDIUM
LOW
HIGH
6650X
6670X
6690X
High Medium
Low
65Double
or65
Quad
2.012-24
MEDIUM
LOW6650X-MG
6670X-MG
Double/Quad Flash: Flash Intensity and Double or Quad flash mode are user selectable via on-board switch.
Low Medium
High
Low Medium 65
Doubleor65
Quad
Medium 6670A
Low 6650A-MG
High 6690A
Die-cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation.
Shock-resistant circuit board mounting incorporates 7 support points.
Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.
Consistent operation during voltage and temperature changes.
Reverse polarity, voltage spike and surge protected.
Circuit board is conformal coated to prevent corrosion.
Warranty: Strobe = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
Approvals
CE, e
AMECA certified to SAE J1318 Class II(amber, blue, clear, red only)
8 or 13Double
or12 or 17
Quad
8 or 13Double
or12 or 17
Quad
Replace X in part number with desired color:A = amber, B = blue, C = clear, G = green, R = red
6600 Series strobes are available in two versions to suit a wide variety of applications. Smartstrobe® versions offer self adjustment for day/night operating intensity and manual flash rate switch-ing. Double/Quad flash versions feature manual control of light intensity and flash rate using a circuit board mounted microswitch.
Smartstrobe®®
JOULESVOLTAGE FPMAMPSPART NO. PROFILE
Double / Quad Flash®
MAGNET
12 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
beacons – strobe
GREENBLUE REDCLEARPROFILE AMBER PART NO.
Lenses
VACUUM MAGNET
7
JOULESVOLTAGE FPMAMPS3 BOLT FLANGE / 1” PIPE PART NO. PROFILE
ECCO’s 6500 Series strobe light offers outstanding value when a cost effective SAE Class II light is required. Featuring a shock-resistant 5-point power supply mounting and robust reinforced nylon base, this series of lights are suitable for both on or off highway applications.
SAE Class II Strobe
1.512-486550X
6570X
7 Double
10 Quad
80 Doubleor
65 Quad
1.512-48
6550X-MG
6551X-MG
6570X-MG
6571X-MG
80 Double
65 Quad10
80 Double7
65 Quad10
1.512-48
6550X-VM
6570X-VM
80 Double7
Medium Low
Shock-resistant circuit board mounting incorporates 5 support points.
Robust glass filled nylon base.
Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.
Consistent operation during voltage and temperature changes.
Circuit board is conformal coated to prevent corrosion.
Warranty: Strobe = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
CE
AMECA certified to SAE J1318 Class II(amber, blue, clear, red only)
Double/Quad Flash: Double or Quad flash mode is user selected at time of installation on 6550 & 6570 models.
MEDIUM /HIGH
LOW R6050LA R6050LB
R6070LA R6070LB
R6050LC
R6070LC
R6050LG
R6070LG
R6050LR
R6070LR
6500 Series / 6500 J-Bolt Replacement Parts
R6501FT
6500 Series
Medium Low
Low 6550A-VM
Medium 6570A
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
Low Medium
MEDIUM
LOW
MEDIUM
LOW
MEDIUM
LOW
MAGNET
Double / Quad Flash®
Flashtube
or
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226 13
beacons – strobe
or
JOULESVOLTAGE FPMAMPSPART NO. PROFILE
JOULESVOLTAGE FPMAMPSPART NO. PROFILE
Single/Double Flash: Single or Double flash mode is user selected at time of installation.
SAE Class II Strobe6500 J-Bolt
Die-cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation.
Thread-on polycarbonate lens and snap-fit flashtube allows easy field service without tools.
Consistent operation during voltage and temperature changes.
Shock resistant circuit board housing incorporates 6 support points.
Choice of 4 additional mounting options.
Warranty: Strobe = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
CE,
AMECA certified to SAE J1318 Class II(amber, blue, clear, red only)
1.512-48MEDIUM
LOW6520X
6530X
80Single
80Double
5Single
7Double
Single / Double Flash
1.512-48MEDIUM
LOW6524X
6534X
65Triple
65Quad
8Triple
10Quad
Triple / Quad Flash
A6520FM A6520MG A6520PM A6521PM
ECCO’s popular J-Bolt mount strobes are available with a range of additional mounting options in order to satisfy any fleet requirements. Order separately.
Additional Mounting Options
Medium 6530A
Low 6520A
Medium Low
Medium Low
Triple/Quad Flash: Triple or Quad flash mode is user selected at time of installation.
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
Flush MountBase
Magnet MountBase
3/4” Pipe MountBase
1” Pipe MountBase
®
®
All the great features of the 6500 Series with the added benefit of an easy and convenient J-Bolt mount for fast installation and/or removal. ECCO’s J-Bolt mount also features a die cast aluminum base incorpo-rating ECCO’s exclusive built-in capacitor cradle providing even and efficient heat dissipation.
or
or or
14
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Low Intensity LEDIndustrial Applications
45 Flickeror
120 Rotating
45 Flickeror
120 Rotating
6460A-MG
6460 Series
Flicker/Rotating Flash: Flicker (8) or rotating flash mode are user selectable via on-board jump pins.
30 ¼-watt LED’s. 12-80v Flickerflash or rotating operation.
Reinforced nylon base and polycarbonate lens. Reverse polarity, voltage spike & surge protected. Warranty: 5 years Temperature Range: -22ºF - +122ºF (-30ºC - +50ºC)
Features
ApprovalsCE, e,
ECCO’s maintenance free 6460 Series LED Beacon features 30 ¼-watt LED’s and offers a choice of rotating or flickerflash operation, producing a warning signal that is ideal for industrial type applications. The long, maintenance free service life of LED technology, backed by a 5 year warranty, make this a perfect replacement solution for existing strobe beacons. This cost effective light features a wide 12-80v operating range that also makes it perfect for use on electrically powered vehicles and equipment.
Flicker / Rotating Flash
3 BOLT FLANGE
MAGNET
120ºTYP
5.1 [130]
3.9 [99]
Reinforcednylon base.
30 ¼-watt LED’s
On-board jump pins allow easy flash pattern selection.
VOLTAGE FPMAMPSPART NO.
0.312-806460X
™
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
0.312-806460X-MG
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226 15
beacons – strobe
70Single
REPLACEABLE‘U’ FLASHTUBE
JOULESVOLTAGE FPMAMPSPART NO. FLASHTUBE
Compact and economical low intensity strobe ideal for industrial applications.
Rugged glass filled nylon base and polycarbonate lens.
6410 and 6410-MG models feature field replaceable snap-fit flashtube.
Reverse polarity, voltage spike and surge protected.
Warranty: 6410, 6410-MG = 2 years 6400 = 6 months / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features 6400 Series
Industrial ApplicationsLow Intensity Strobe
0.312-80
6410X
1.5
NONREPLACEABLEFLASHTUBE
6400X
0.312-806410X-MG 70Single1.5
Single Flash
Single Flash: Low intensity industrial strobe light.
REPLACEABLE‘U’ FLASHTUBE
6410A
Approvals
®
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
ECCO’s low profile 6400 Series strobes are designed specifically for forklift and other material handling/industrial applications. The 6400 series offers a cost effective, high quality product that will operate consistently in a full range of 12-80V applications.
3 BOLT FLANGE
MAGNET
GREENBLUE REDCLEAR
R6400LA R6400LB R6400LC R6400LG R6400LR
AMBER
6400/6460 Series Replacement Parts
PART NO.
R6410FT
Lenses Flashtube
CE, e,
16
beacons – LED
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
6260 SeriesSAE Class III LEDIndustrial Applications
ECCO’s maintenance free 6260 Series LED Beacons feature one of the the latest 3 watt side emitting LED’s and quad fl ash operation, producing a warning signal ideally suited to industrial applications. This cost effective unit has a wide operating range of 12-80v making it the perfect light for use on electric vehicles. The long, trouble free service life and low amp draw characteristics of LED technology make this an ideal replacement solution for rotating or strobe beacons.
6260A
6266A
Utilizes a single 3 watt side emitter LED.
12-80V, Quad fl ash operation.
Reinforced nylon base with epoxy sealed electronics provides superior environmental protection.
Robust polycarbonate lens.
Reverse polarity, voltage spike and surge protected.
Warranty: 5 years
Temperature Range: -40°F to +158°F (-40°C to +70°C)
Approvals
Features
SAE J845 Class III (amber only)
CE, e,
IP Rating 67Latest 3 watt side emitter LED.
Powder coated extruded aluminum heat sink effi ciently dissipates heat from the LED.
Reinforced nylon base is epoxy fi lledfor environmental protection.
75Quad
VOLTAGE FPMAMPS2 BOLT PART NO.
0.312-806260X
Quad Flash ™
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
1/2" PIPE
75Quad0.312-806266X
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226 17
beacons – strobe
CE, e,
IP Rating 67
PART NO. GREENBLUE REDCLEARAMBER
JOULESVOLTAGE FPMAMPSPART NO.
Field replaceable snap-fit flashtube.
Compact and economical low intensity strobe ideal for industrial applications.
Epoxy encapsulated circuit board protects against moisture, dust and vibration.
Reverse polarity, voltage spike and surge protected.
Warranty: 6220, 6225 and 6226 = 5 years Flashtube = 6 months
Approvals
Features 6200 Series
Industrial ApplicationsLow Intensity Strobe
0.3
0.5
2 BOLT
6220X
6225X
1.5
2
1/2” PIPE
0.512-806226X
85Single
2
Single Flash: Low intensity industrial strobe light.
Rugged glass filled nylon base and polycarbonate lens.
R6220LA R6220LB R6220LC R6220LG R6220LR
6200/6260 SeriesReplacement Parts
R6200FT
6225A
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
Temperature Range: -22°F to +122°F (-30°C to +50°C) 6200 Series strobes offer a high quality yet
economical lighting solution specifically intended for use in the materials handling industry. These lights are ideal for use in a broad range of industrial applications.
Single Flash®
LensesFlashtube
12-80
85Single
18 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
beacons – strobe
Heavy duty die cast aluminum base is coated against corrosion and designed for vibration resistance and heat dissipation.
Wipe clean smooth outer dome offers no place for dust build up and protects inner fresnel lens.
Easy to install using 2 toggle bolts.
Circuit board is conformal coated to prevent corrosion.
Consistent operation during voltage and temperature changes.
Voltage spike and surge protected
Warranty: Strobe = 2 year / Flashtube = 6 months
Temperature Range: -22F to +122F (-30C to +50C)
Features
ApprovalsSAE J845 Class II
CE
6000 SeriesSAE Class II Strobe
6015
PART NO.
R6010LC
6000 Series Replacement Parts
PART NO.
R6050LA
PART NO.
R6501FT
Dome FlashtubeLens
Smartstrobe: On-board photo cell automatically adjusts flash intensity for day or night operation. Double or Quad flash mode is user selectable via on-board switch.
Double/Quad Flash: Flash intensity and Double or Quad flash mode are user selectable via on-board switch.
This easy to install, toggle bolt strobe light is available in 2 versions offering automatic or manual control. Switchable Intensity versions feature manual control of light intensity and flash rate using a microswitch mounted on the circuit board. Smart Strobe versions offer self-adjustment for day/night intensity and manual flash rate switching.
Smart Strobe®
Double / Quad Flash
TOGGLE BOLT JOULESVOLTAGE FPMAMPSPART NO.
PART NO.
2.1
65Double
or 65
Quad
12-246015A
®
8 to 13Double
or12 to 17
Quad
TOGGLE BOLT
Amber only available.
JOULESVOLTAGE FPMAMPS
2.1
65Double
or 65
Quad
12-246010A
8 or 13Double
or12 or 17
Quad
®
19
beacons – rotating
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO.TYPE
R5012BH
R5024BH
12V
24V
Twist-on lens allows easy bulb replacement.
Self-lubricating heavy duty motor andgear assembly.
Warranty: Rotator = 2 years / Bulb = 90 days
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
5715X & 5715X-VM AMECA certified to SAE J845 Class I (amber, blue, clear and red only).
5715X & 5715X-VM certified to California Title 13(amber, blue and red only).
AMBER
R5700LA
RED
R5700LR
BLUE
R5700LB
GREEN
R5700LG
CLEAR
R5700LC
Bulb Lenses
5700 SeriesSAE Class I Rotator
5715A
Oversized beacon design provides a solution for applications where a larger beacon shape is desirable. Features ECCO’s heavy-duty gear drive rotator.
4.4 100125715X-VMVACUUM MAGNET
FACTORY INSTALLED VACUUM MAGNET WITH 17’ STRAIGHT CABLE &
CIGARETTE PLUG2.0 100245725X-VM
7.6 [193]
3 BOLT FLANGE/1” PIPE
RotatorReplace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
5700 Series Replacement Parts
MOUNTING FEATURESVOLTAGE FPMAMPSPART NO.
4.4 100125715X 3 INTEGRAL MOUNTING OPTIONS:
• 3 bolt internal• 3 bolt external
• 1” pipe2.0 100245725X
20
beacons – rotating
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
5800 SeriesSAE Class I Rotator
Polycarbonate base and twist-on lens withlocking screw.
Unique Free-form optics rotator modulesprovide high intensity light output.
Warranty: Rotator = 1 year / Bulb = 90 daysBelt = ECCOLIFE™
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
SAE J845 Class I (amber, blue and red only)
E Approved to EC R65 (5840, 5850 only)
Available in a wide range of base mount-ings and two height profiles, ECCO’s 5800 Series beacons feature smooth and quiet belt-driven rotators incor-porating free-form optical reflectors to maximize beam pattern and light output.
Replace X in part number with desired color: A = amber, B = blue, R = red
5840AHIGH PROFILE
ROTATOR
5811ALOW PROFILE
ROTATOR
MOUNTING FEATURESVOLTAGE FPMAMPSPART NO.
VACUUM MAGNET
3 BOLT
5.2 160125813X 3 BOLTMOUNT
5.2 160125813X-MGFACTORY INSTALLED
MAGNET WITH 15’ STRAIGHTCABLE & CIGARETTE PLUG
5.2 160125813X-VM
FACTORY INSTALLED VACUUM MAGNET WITH 15’ STRAIGHT CABLE &
CIGARETTE PLUG
1 BOLT
5.2 160125811X1 BOLT MOUNT
FEATURES THRU BOLT WIRING
5.2 160125810X
FLEXI-POLE
FLEXIBLE MOUNTDESIGNED TO FIT DIN POLE MOUNT
DIN #72591(ORDER SEPARATELY)
MAGNET
Low Profile Rotator
CE, e
IP Rating 54
21
beacons – rotating
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
MOUNTING FEATURESVOLTAGE FPMAMPSPART NO.
MOUNTING FEATURESVOLTAGE FPMAMPSPART NO.
5.2 160125840X
3 BOLT
3 BOLTMOUNT
5.2 160125850X
POLE
(continued) 5800 Series
LBLUE T
R5810LBA5850LB A5850TB
PART NO.
5800 Series Replacement Parts
R5812BH
R5840LB
AMBER
R5810LA
R5840LA
RED
R5810LR
R5840LR
DESIGNED TO FIT DIN POLE MOUNT
DIN #72591(ORDER SEPARATELY)
Use with 5810, 5815 and 5850(DIN #72591)
PROFILE
LOW
HIGH
POLE
5.2 160125815X
DESIGNED TO FIT DIN POLE MOUNT
DIN #72591(ORDER SEPARATELY)
5.2 160125816X
1 BOLT FLEXI-BASE
High Profile Rotator
Bulb Lenses DIN Poles
Low Profile Rotator
Flexible rubber base resists vibration and protects against minor impacts. Single wire thru bolt requires only one mounting hole for quick and
easy installation.
1 BOLT MOUNTFEATURES THRU BOLT
WIRING
22
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
ECCO offers an extensive range of both minibars and full size lightbars, all manufactured with ECCO quality, delivered at ECCO speed and backed by ECCO customer service. Whatever your particular requirements ECCO is sure to have the right product to suit your application and your budget.
- Leading in Lighting®
’S LINE OF LIGHTBARS & MINIBARS
10 Series
15 Series
20 Series
30 Series
60 Series
70 Series
5135 / 5150 / 5180 Series
5315 / 5350 Series
5280 Series
Custom Lightbar ConfigurationThe lightbar configurations depicted in this catalog are only a small sample of our most popular models from the hundreds we have on file. Should you have a specific requirement that doesn’t feature in this catalog you can always call us for additional specifications from our database. Alternatively ECCO offers a quick turnaround custom lightbar service enabling you to specify the exact components needed for your particular application. This service is available on 10, 15, 20, 30, 60 and 70 Series lightbars ensuring that whatever your need may be, ECCO can provide the solution. Check for the availability of custom configuration on the following pages, and call ECCO Customer Service at 1-800-635-5900 to order copies of our Faxback Lightbar Specifier or simply refer to the back of your ECCO price list.
rchfouae
en
this
recifhourae
e. Check for the Check for the
this our
eds fic
his or r
d
5ROTOLED™
23
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
The 10 Series LED lightbar combines the high intensity LED warning and low profile styling of the 15 Series with the roof hugging shape and Cleversector™ functionality of the 20 Series product lines. This light-bar offers maintenance free, low amp draw warning capability along with exceptional functionality and aerodynamic styling, suited to car and pick-up truck applications.
COLORPART NO. FPMAMPSLED CONFIGURATION
CORNER FRONT REARVOLTS CHASSIS
AUX
COLORPART NO. FPMAMPSCORNER FRONT REAR
VOLTS CHASSIS
10 SeriesLED Lightbar
1210-00047-E 3.8 80
1210-00051-E 13.4 80
52” / 1.33m
Back lit, rubber key touch-pad provides finger tip control of built in Safety Director™ (included with safety director models).
10-00051-E
H = 2”/ 53 mm (center) W = 12”/ 305mm
FRONT (TOP)
REAR (BOTTOM)
DOMESEAMS
Chassis Diagram Key
LED - ECCO’s unique LED module uses four 1 watt LED’s and advanced optics to create a wide-angle beam pattern with industry leading light output. Quad flash (80FPM).
LED Safety Director™ - Built in to the 10 Series primary warning LED’s, when activated the rear LED modules are controlled via the touch-pad, all other modules maintain primary flash patterns. Features 7 flash patterns and hi/lo intensity control. Number of lightheads dependent on configuration (amber) .
Warranty: Lightbar = 2 years / Electronic components = 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Cleversector™ - Pair of unique multifunction light modules can be used as takedown lights, an oscillating intersection clearing light, worklight and alley light (forward facing).
LED Corner Cluster - Utilizes 3 separate LED modules mounted at 30° to provide enhanced warning to the sides of the vehicle.
AUX
™
1210-00048-E 4.0 80
1210-00049-E 13.6 80
Symbols / Features Guide
LED CONFIGURATION
47” / 1.2m™
5
5ILLUMINATESAMBER
ILLUMINATESAMBER
ILLUMINATESAMBER
12 2
ILLUMINATESAMBER
6 2
6
612 2
6 2
CUSTOMCONFIGURATION
AVAILABLE
24
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
®
COLORPART NO. FPMAMPSCORNER FRONT REAR
VOLTSLED CONFIGURATION
CHASSIS
COLORPART NO. FPMAMPSCORNER FRONT REAR
VOLTSCHASSIS
Symbols / Features Guide
15 Series - LED Lightbar
The 15 Series lightbar offers the long, maintenance free service life of LED technology along with maximum light output due to the unique optics of ECCO’s LED modules. Each LED module features four 1 watt LED’s providing high intensity warning with the benefit of low amp draw. The stylish, low profile lightbar features an aluminum base and clear weather-proof polycar-bonate housing along with an encapsulated power supply to provide strength, durability and protection against the environment.
LED - ECCO’s unique LED module uses advanced optics to create a wide-angle beam pattern with industry leading light output. Quad flash (80FPM).
LED Safety Director™ - Built in to the 15 Series primary warn-ing LED’s, when activated the rear LED modules are controlled via the touch-pad, all other modules maintain primary flash patterns. Features 7 flash patterns and hi/lo intensity control (number of lightheads dependent on configuration).
Warranty: Lightbar = 2 years / Electronic components = 5 years
212
COLORPART NO.
15-00035-E
FPMAMPS
1.6 80
CORNER FRONT REAR
4 2
VOLTS
ILLUMINATESAMBER
21215-00036-E 1.6 804 2ILLUMINATESAMBER
8 81215-00037-E 3.2 804 4ILLUMINATESAMBER
54” / 1.37m - StreetLazer®
51215-00038-E 2.9 804 5ILLUMINATESAMBER
7 71215-00039-E 3.0 804 4ILLUMINATESAMBER
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Back lit, rubber key touch-pad provides finger tip control of built in Safety Director™ (included with safety director models).
15-00039-E
FRONT (TOP)
REAR (BOTTOM)
DOMESEAMS
Chassis Diagram Key
H = 2”/ 53mm W = 12”/ 305mm
™
CHASSISLED CONFIGURATION
LED CONFIGURATION
49” / 1.24m - StreetLazer® ™
™39” / 0.98m - StreetLazer®
CUSTOMCONFIGURATION
AVAILABLE
25
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
AUXILIARY
AUXILIARY
COLORPART NO. FPMAMPSVOLTS CHASSISMIRRORSWARNING
COLORPART NO. FPMAMPSVOLTS CHASSIS
Symbols / Features Guide
20 SeriesTwin Deck Lightbar
The unique shape of the 20 Series lightbar ensures a smart, roof hugging fit for any car or pick-up truck application. The twin deck design features an aluminum base and hinged polycarbonate lens for durability and ease of maintenance, along with offering addi-tional lighting options including an integral Safety Director™ and the unique Cleversector™ on the lower deck.
Rotator - SRS™ Staggered Rotator System provides visibility of both rotators at each end of the lightbar. Features smooth operation, gear driven rotators. (55W Bayonet, RPM: Outboard = 150, Inboard = 90)
Mirrors - Diagonal mirrors reflect light to front and rear without obstructing visibility of rotators at the end of the lightbar.
TOP DECK: LOWER DECK:
Cleversector™ - Pair of unique multifunction light modules can be used as takedown lights, an oscillating intersection clearing light, worklight and alley light (forward facing).
Halogen Safety Director™ - Controlled via touch-pad, multiple flash patterns available (35W). Number of lightheads dependent on configuration. (Amber)
Warranty: Lightbar = 2 years / Bulb = 90 days
47” / 1.2m
1220-00177-E 30.8 7304 3
31220-00042-E 45.9 7304
Temperature Range: -22°F to +122°F (-30°C to +50°C)
MIRRORS
52” / 1.33m
1220-00178-E 30.8 7304
1220-00044-E 48.9 7304
WARNING
Hinged lens allows easy field service.
20-00042-E
H = 5.1”/ 130mm (center) W = 12”/ 305mm
FRONT (TOP)
LOWER DECK
TOP DECK
REAR (BOTTOM)
DOMESEAMS
Chassis Diagram Key
3
3
5
6
Back lit, rubber key touch-pad provides finger tip control of built in Safety Director™ (included with safety director models).
SRS™ rotators offer enhanced side warning
CUSTOMCONFIGURATION
AVAILABLE
26
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
AUXILIARYPART NO.CHASSIS
Symbols / Features GuideTOP DECK: LOWER DECK:Rotator - SRS™ Staggered Rotator System provides visibility of both rotators at each end of the lightbar. Features smooth operation, gear driven rotators. (55W Bayonet, RPM: Outboard = 150, Inboard = 90)
Linear Strobe - V configuration, quad flash linear strobes provide high intensity 360° warning with no ‘sun washout’ (Quad flash 80FPM - fitted in fours, positioned at 45° to each corner).
Warranty: Lightbar = 2 years / Bulb = 90 days / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Alternating Halogens - Front or rear (F/R) facing small amber alternating directional halogen lights, fitted in pairs (35W).
Alternating LEDs - Front or rear (F/R) facing amber alternating LEDs, fitted in pairs.
Stop, Tail, Turn Lights - Pair of rear facing high-level auxiliary signal lights
Worklights - Pair of rear facing 55W adjustable halogen worklights.
The twin deck design of the 30 Series lightbar maximizes lighting options allowing unobstructed light output of the primary warning lights on the upper deck and offering various auxiliary lighting options on the lower deck. Featuring an aluminum base and hinged polycar-bonate lens for durability and ease of maintenance, the 30 Series is available in a wide range of standard configurations.
12
COLOR
30-00012-E
FPMAMPS
20 730
1230-00053-E 44 730
VOLTS
8201230-00052-E 25
4
4
5
5
3
3
4
41230-00054-E 49 1060
41230-00058-E 29 144
Mirrors - Diagonal mirrors reflect light to front and rear without obstructing visibility of rotators at the end of the lightbar.
F/R
Halogen Safety Director™ - Controlled via touch-pad, number of light heads dependent on configuration, multiple flash patterns available (Amber 35W).
FRONT (TOP)
TOP DECK
REAR (BOTTOM)
DOMESEAMS
Chassis Diagram Key
LOWER DECK
Back lit, rubber key touch-pad provides finger tip control of built in Safety Director™ (included with safety director models).
30-00110-E
H = 5.1”/ 130mm W = 12”/ 305mm
8
8
8
30 SeriesTwin Deck Lightbar
MIRRORSWARNING
49” / 1.24m®
Hinged lens allows easy field service.
SRS™ rotators offer enhanced side warning
CUSTOMCONFIGURATION
AVAILABLE
27
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
COLORPART NO. FPMAMPSVOLTS CHASSISAUXILIARYMIRRORSWARNING
F/R
COLORPART NO. FPMAMPSVOLTS CHASSISAUXILIARYMIRRORSWARNING
41230-00081-E 36.6 840
41230-00082-E 39.6 840
5
3
3
41230-00079-E 25 820
2/0
2/2
F/R
41230-00116-E 37.6 730
41230-00106-E 40.6 730
41230-00107-E 40.6 840
41230-00110-E 61.6 730
(continued) 30 Series
0/2
2/0
3
3
3
3 8
54” / 1.37m
59” / 1.5m
28
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SAE Class I - Single Deck Lightbar60 Series -
6603060
WARNINGPART NO.CHASSIS COLOR FPMAMPSVOLTS
F/R
MIRRORS AUXILIARY
F/R
22126483001 10.2 640
24126483002 20.4 1280
25126483003 25.5 1760
2
2
4126483011 7.8 520
48” / 1.2m - Evolution® = =®
Symbols / Features GuideRotator - In-line belt driven rotator modules provide smooth, quiet operation. Reflectors incorporate free-form optics for enhanced light output and beam spread. (55W H1 bulb / 160 FPM)
360° Strobe - Double/Quad flash 360° fresnel strobes with helical flashtubes, powered by heavy-duty ECCO power supplies. (User selectable: 70 Double / 65 Quad FPM & Hi/Lo intensity)
Directional Strobe - Double/Quad flash front and rear large directional strobes with helical flashtubes. Powered by ECCO power supplies, fitted in fours. (User selectable: 70 Double / 65 Quad FPM & Hi/Lo intensity.
Mirrors - Stainless steel V and diamond mirrors (dependent on configuration).
Alternating Halogens - Front or rear (F/R) facing large amber alternating directional halogen lights, fitted in pairs (50W).
Stop, Tail, Turn Lights - Pair of rear facing high-level auxiliary signal lights
Worklights - Pair of rear facing 55W adjustable halogen worklights
DOT Lights - Maintenance free LED DOT strip
Warranty: Lightbar = 2 years / Bulb = 90 days / Flashtube = 6 months Belt = ECCOLIFE™
Approvals: SAE J845/1318 as listed, CE
Temperature Range: -22°F to +122°F (-30°C to +50°C)
WARNINGPART NO.CHASSIS COLOR FPMAMPSVOLTS
F/R
MIRRORS AUXILIARY
23126363001 15.6 1120
22126363003 3.9 260
F/R
36” / 0.91m - Evolution® = =®
Chassis Diagram KeyFRONT (TOP)
REAR (BOTTOM)
DOMESEAMS
H = 4.3”/ 109mm W = 8.3”/ 211mm
ECCO’s 60 Series lightbars are available in a wide variety of configurations offering a high level of functionality in a compact, low profile and aerodynamic housing. 60 Series lightbars feature ECCO’s low noise, belt-drive rotator incorporating free-form reflectors for a larger, more powerful beam pattern.
CUSTOMCONFIGURATION
AVAILABLE
29
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
WARNING
WARNING
PART NO. CHASSISCOLOR FPMAMPSVOLTSF/R
MIRRORS AUXILIARY
F/R
=
PART NO. CHASSISCOLOR FPMAMPSVOLTSF/R
MIRRORS AUXILIARY
F/R
2/02
2
2
2126543050 29.4 1440
43126545001 28.7 1120
4126543002 20.4 1280
44126543020 24.6 1280
44126543018 33.8 1280
25126543001 26 1760
22/2 2/0
2/0
2/0
2/0
2/2
2/2
2/2
4
2126603003
Evolution® - 60” / 1.5m
35.6 770
22126603060 37.1 2500
3126605005 32.9 1120
44126605003 38 1280
44126605004 42.2 1280
44126605055 42.2 1280
=
(continued) 60 Series
Evolution® - 54” / 1.37m
30
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
MIRRORS
MIRRORS
PART NO.CHASSIS COLOR FPMAMPSVOLTSWARNING
PART NO.CHASSIS COLOR FPMAMPSVOLTSWARNING
Symbols / Features GuideRotator - Self-lubricating motor gear assembly, can accept colored filters if required (50W/100FPM).
Warranty: Lightbar = 2 years / Bulb = 90 days
Approvals: SAE J845 Class 1
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Mirrors - Stainless steel V and diamond mirrors (dependent on configuration).
SAE Class ISingle Deck Lightbar
2
2
2
2125362001 8.8 400
3125363001 13.2 700
4125362002 17.6 800
36” / 0.91m
2 2125483001 8.8 400
4 3125483004 17.6 1000
48” / 1.2m
70 Series lightbars offer an economical yet highly effective lightingsolution featuring ECCO’s self-lubricating gear-drive rotator. Featuring a rugged aluminum base and polycarbonate lens the 70 Series is available in 5 standard configurations. If multiple colors are a requirement, clear dome versions with amber, blue and red filters are available.
70 Series
5483004
Chassis Diagram KeyFRONT (TOP)
REAR (BOTTOM)
DOMESEAMS
H = 5.8”/ 147mm W = 8.3”/ 211mm
CUSTOMCONFIGURATION
AVAILABLE
31
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
The Streetlazer® minibar offers a compact high intensity LED lighting solution. ECCO’s unique LED modules feature four 1 watt LED’s and advanced optics creating a wide-angle beam with increased vertical light dispersion. The Streetlazer® offers low amp draw and features an encapsulated power supply for increased protection against the environment.
COLORPART NO. FPMAMPSLED CONFIGURATION
CORNER FRONT REARVOLTS
1215-00011-E 0.8 804
11215-00013-E 1.2 804 1
21215-00015-E 1.6 804 2
31215-00019-E 2.0 804 3
Coated aluminum base and polycarbonate lens.
LED’s rated to 100,000 hours operation.
Warranty: Lightbar = 2 years / Electronic components = 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Choice of two user-selectable flash patterns (quad flash).
CHASSIS
®
ILLUMINATESAMBER
ILLUMINATESAMBER
ILLUMINATESAMBER
ILLUMINATESAMBER
15 Series Replacement Parts
23” LED Minibar
15-00013-EFeatures
- 15 Series
END CENTER
R159-901XUPPER R109-906X
R309-902CLOWER R209-907C
FRONT/REAR
R109-924X
CORNER
R159-938X
PART NO.
R109-927
UPPERCENTER
UPPER END
Replace X in part number with desired color:A = amber, B = blue, C = clear, R = red
StreetLazer® - 23” / 0.59m™
Lens Clip LensesLED Modules
Replace X in part number with desired color: A = amber, B = blue, W = white, R = red
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
CUSTOMCONFIGURATION
AVAILABLE
32
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
CHASSIS
SAE Class I22” Rotating Minibar
Featuring ECCO’s low noise, belt-drive rotator incorporating free-form reflectors. This compact 22” minibar is a high performance yet economical lighting solution.
60 Series -
Coated aluminum base and low pro-file, ribbed polycarbonate lens.
Belt driven rotator assembly with free-form optical reflector.
Warranty: Minibar = 2 years Belt = ECCOLIFE®
Bulb = 90 days
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
Approvals
CEIP Rating 54
SAE J845 Class I (Amber only)
12
COLOR
6221001
6221002
6221003
6221004
FPMAMPS
10.5 640
VOLTS
6221001
PART NO.
22” / 0.57m - Evolution®
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
33
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
CHASSIS
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
COLOR*
IP Rating 54
SAE Class II22” Strobe Minibar
Double or Quad flash operation powered by ECCO’s heavy-duty power supplies, this compact 22” unit also features hi/lo inten-sity control.
Coated aluminum base and low profile, ribbed polycarbonate lens.
High intensity double/quad flash warning signal.
Warranty: Minibar = 2 years Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
CE
SAE J1318 Class II (AAA Versions Only)
- 60 Series
BLUE REDCLEAR
R5150LB
AMBER
R5150LA R5150LC R5150LR
Lenses
60 Series Minibar Replacement Parts
BLUE REDCLEAR
R5101LB
AMBER
R5101LA R5101LC R5101LR
Domes
PART NO.Flashtube
R6501FT
PART NO.
Bulb
R5812BH
6221005
12-24
PART NO.
6221005
6221006
6221007
6221009
FPMAMPS
3.8 70 65
VOLTSQUADDOUBLE
AMBER / AMBER
CLEAR / CLEAR
AMBER / AMBER
AMBER / CLEAR
*Additional Dome/Lens color configurations available.
Double/Quad Flash: Double or Quad Flash, hi/lo intensity user selected at time of installation or manually switchable (switch not supplied).
LENSDOME
Evolution® - 22” / 0.57m®
JOULES
7-13Double
or
11-15Quad
34
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
CHASSIS
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
SAE Class I 22” Rotating Minibar
This economical minibar provides a robust, high visibility warning solution featuring ECCO’s heavy-duty gear driven rotator.
70 Series
Approvals
Coated aluminum base and polycarbonate lens.
Self-lubricating motor and gear rotator assembly.
Warranty: Minibar = 2 years Bulb = 90 days
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
SAE J845 Class I (Amber dome only)
*Additional dome / filter color configuration available.
5221001
COLOR*PART NO. FPMAMPSVOLTSFILTERDOME
12
5221001
5221002
5221003
5221004
5221005
8.6 400
CLEAR / CLEAR
CLEAR / CLEAR
CLEAR / CLEAR
CLEAR / CLEAR
AMBER / AMBER
22” / 0.57m
PERMANENT MOUNT
The above trademarks, trade dress and product designs are unique to ECCO. They are synonymous with innovation, product quality and conformance to industry standards and are the sole and exclusive property of ECCO. All rights reserved.
U.S. Trademark Registrations (Lighting): 2,576,680; 2,868,744; 2,449,869; 1,830,225; 2,868,763; 2,868,762; 2,866,295; 2,896,779; 2,969,210; 2,975,174; 2,975,175; 3,104,543
U.S. Patents (Lighting): 6,292,097; 6,720,883; 7,023,353 Other patents pending
For more information contact ECCO Customer Service
® ®®
ECCO® Trademarks & Patents
®
® ®
35
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
CHASSIS
BLUE REDCLEARAMBERPART NO.
BLUE REDCLEARAMBERPART NO.
COLOR*
12-48
PART NO.
5450AAA
5450ACC
5450CAA
5450CAC
FPMAMPS
3.0 80 65
VOLTSQUADDOUBLE
AMBER / AMBER
CLEAR / CLEAR
AMBER / AMBER
AMBER / CLEAR
*Additional Dome/Lens color configurations available.
Double/Quad Flash: Double or Quad Flash, hi/lo intensity user selected at time of installation or manually switchable (switch not supplied).
LENSDOME
R6050LBR6050LA R6050LC R6050LR
70 Series Minibar Replacement Parts
R5400LBR5400LA R5400LC R5400LR
R6501FT
SAE Class II22” Strobe Minibar
ECCO reliability in an economical minibar featuring dual alternating strobes.
Coated aluminum base and polycarbonate lens.
Reverse polarity, voltage spike and surge protected.
Warranty: Minibar = 2 years Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
CE
SAE J1318 Class II (AAA versions only)
70 Series
R5012BH
5450CAA
Lenses
Domes
Flashtube
Bulb
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
PERMANENT MOUNT
JOULES
7Double
or
10Quad
22” / 0.57m®
36
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
BLUE REDCLEARAMBER PART NO.
5135 SeriesSAE Class I15” Rotating Minibar
5135 Series Replacement Parts
This compact 15” minibar features ECCO’s low noise, belt-drive rotator incorporating free-form reflectors.
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
5135A
Low profile, high performance belt-drivenminibar.
Unique free-form optics rotator modules provide high intensity light output.
Vacuum magnet version features 2 factory fitted vacuum magnets and 17’ straight cigarette cord with plug.
Warranty: Minibar = 2 years / Belt = ECCOLIFE™ Bulb = 90 days
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ApprovalsSAE J845 Class I (amber, blue and red only)
CE, IP Rating 54
R5100LA R5100LB R5100LC R5100LR R5812BH
Domes Bulb
CHASSIS
PERMANENT MOUNT
VOLTAGE AMPS
10.5 48012
PART NO.
5135X
FPM
10.5 480125135X-VM
15” / 0.4m - Blaze® II
VACUUM MAGNET
37
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO.
SAE Class II 15” Strobe Minibar
5150 Series
REDBLUE CLEAR
R5150LB
AMBER
R5150LA R5150LC R5150LRR5100LA
AMBER
R5100LB
BLUE
R5100LC
CLEAR
R5100LR
RED
5150 Series Replacement Parts
R6501FT
Driven by ECCO’s ultra reliable power supply, this high performance aerody-namic 15” lightbar is feature packed with hi/lo intensity and Double/Quad flash functionality.
5150A
Double/Quad Flash: Double or Quad Flash, hi/lo intensity user selected at time of installation or manually switchable (switch not supplied, permanent mount models only).
*Additional Dome/Lens color configurations available.
DomesFlashtube Lenses
CHASSIS
7-1370
Double
AMBER / AMBER
CLEAR / CLEAR
AMBER / AMBER
AMBER / CLEAR
3.812-24
LENSDOMECOLOR*PART NO.
5150AAA
5150ACC
5150CAA
5150CAC
FPMAMPS
7-13Double
or
11-15Quad
70Double
or
65Quad
VOLTS
AMBER / AMBER
CLEAR / CLEAR
AMBER / AMBER
AMBER / CLEAR
3.812-24
JOULES
®
Blaze® II - 15” / 0.4m
5150AAA-VM
5150ACC-VM
5150CAA-VM
5150CAC-VM
PERMANENT MOUNT
VACUUM MAGNET
Super high intensity output driven by ECCO heavy duty power supply.
Compact, low profile and highly effective minibar.
Incorporates diamond mirror for increased secondary flash rate.
Vacuum magnet version features 2 factory fitted vacuum magnets and 15’ straight cigarette cord with plug.
Reverse polarity, voltage spike and surge protected.
Warranty: Minibar = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
CE, e, IP Rating 54SAE J1318 Class II (AAA versions only)
38
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
This versatile LED minibar offers many fea-tures and benefits including it’s compact size, available vacuum-magnet mounting option, multiple flash patterns and synchronization capability (permanent mount only). The Blaze™ II LED minibar is available in 6 or 8 head configurations, each featuring four high intensity 1-watt LED’s per head. Other major benefits include low amp draw and long, maintenance-free service life backed by a 5 year warranty. The Blaze™ II LED minibar provides a convenient, high performance LED lighting solution in a cost-effective package.
SAE Class I15” LED Minibar
5180 Series
5188CA-VM
518XXX: 4.5 [114]518XXX-VM: 5.1 [129
15.75 [400]
8.27 [210]
Features
Compact, low profile, high intensity LED minibar.
Configurations: • 6 head (4 corner, 1 forward and 1 rear facing) • 8 head (4 corner, 2 forward and 2 rear facing)
Flash patterns: (vary by configuration, selectable via internal electronics) • Permanent Mount Models - 2 flash patterns • Vacuum-Magnet Models - 3 flash patterns
Multiple permanent mount versions can be synchronized.
Vacuum magnet versions feature 2 factory fitted vacuum magnets and 15’ straight cigarette cord with switched plug.
Warranty: 5 years (electronic components)
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
CE, e, IP Rating 54SAE J845 Class I (amber, blue and red only)
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
Multi Flash: Flash patterns vary by configuration, selectable via internal electronics (flag terminals).*Additional LED color combinations available.
ILLUMINATIONDOME
5186A-VM
5186CX-VM
5188A-VM
5188CX-VM
AMBER
SPECIFY COLOR
AMBER
SPECIFY COLOR
12
COLOR*PART NO.
5186A
5186CX
5188A
5188CX
AMPSHEADS VOLTS
AMBER
SPECIFY COLOR
AMBER
SPECIFY COLOR
2.9
2.9
3.2
3.2
6
6
8
8
12
CHASSIS
PERMANENT MOUNT
VACUUM MAGNET
5180 Series Replacement Parts
CLEARAMBER
R5100LA R5100LC
Domes
™Blaze® II - 15” / 0.4m
39
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
™
RotoLED™ - 13” / 0.35m
LED Hybrid technology provides a high intensity rotating warning signal with no gears, brushes or bulbs to wear out.
Polycarbonate lens features a UV hard coating to greatly reduce cracking, hazing, abrasion and fading.
Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
ApprovalsSAE J845 Class I
California Title 13 (blue & red only)
E Approved to EC R65 (amber & blue only)
CE, e
IP Rating 67
ILLUMINATIONDOMECOLOR*PART NO. FPMAMPSVOLTS
12-24
5280A
5280B
5280G
5280R
5280CAA
5280CAC
5280CBB
5280CCC
5280CGG
5280CRB
5280CRR
2.6 360
AMBER / AMBER
BLUE / BLUE
GREEN / GREEN
RED / RED
AMBER / AMBER
AMBER / CLEAR
BLUE / BLUE
CLEAR / CLEAR
GREEN / GREEN
RED / BLUE
RED / RED
CHASSIS
PERMANENT MOUNT
SAE Class I 13” LED Hybrid Minibar
- 5280 Series
The 5280 Series RotoLED™ Minibar combines all the benefits of the latest LED’s with the unmistakable warning signal of a rotator, without compromising reliability. LED hybrid technology uses a brushless magnetic drive system to spin the reflector disk, reducing noise and eliminating the typical motor/gear drawbacks associated with conventional rotators. Each hybrid module also features eight 3-watt LED’s and TIR optic to provide SAE Class I light output. Additional benefits include an extended, service free life, low amp draw and a 5 year warranty.
5280CAA
13.3 [337]
6.3 [160]
5.8 [146]
ROTOLED™
40
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
COLOR*PART NO. FPMAMPSVOLTAGEFILTERDOME
Self-lubricating heavy duty motor and gearassemblies.
Vacuum magnet version features 2 factory fitted vacuum magnets and 17’ straight cigarette cord with plug.
Magnet version features 4 factory fitted magnets and 17’ straight cigarette cord with plug.
Warranty: Minibar = 2 years / Bulb = 90 days
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
AMECA Certified to SAE J845 Class I (12V only)(Clear dome with amber, clear and red filters)(Amber, blue, clear and red domes with clear filters)
SAE Class I15” Rotating Minibar
5315 Series
8.6
4.1 300
12
24
5315A
5325A
8.6125315CAA AMBER / AMBER
CLEAR / CLEAR
15” / 0.4m
BLUERED AMBER
A5000FAA5000FR A5000FBR5300LA
AMBER
R5300LBBLUE
R5300LCCLEAR
R5300LRRED
PART NO.
5315 Series Replacement Parts
R5012BH12V
24V R5024BH
8.6 300125315A-VM
5315CAA-VM AMBER / AMBER
CLEAR / CLEAR
8.6 300125315A-MG CLEAR / CLEAR
Featuring ECCO’s heavy-duty gear drive rotator, this minibar is offered in a range of dome/filter color combinations.
*Other dome / filter color configurations available.
5315CAA
VOLTS
5315, A/B/R certified to California Title 13
Domes BulbFilters
PERMANENT MOUNT
CHASSIS
MAGNET
VACUUM MAGNET
41
lightbars / minibars
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
CE
SAE J1318 Class II (CAA versions only)
SAE Class II15” Strobe Minibar
5350 SeriesVacuum magnet version features 2 factory fitted vacuum magnets and 17’ straight cigarette cord with plug.
Reverse polarity, voltage spike and surge protected.
Warranty: Minibar = 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Approvals
Features
GREENBLUE REDCLEARAMBER
R6050LBR6050LA R6050LC R6050LG R6050LR
AMBER
R5300LA R5300LB
R5300LC R5300LR
BLUE
CLEAR RED
PART NO.
5350 Series Replacement Parts
R6501FT
ECCO reliability in a compact and economical lightbar. Dual alternating strobes and easy mounting options offer the flexibility and cost effectiveness of a single strobe with the performance of a full size lightbar.
5350CAA
DomesFlashtube Lenses
*Additional Dome/Lens color configurations available.Double/Quad Flash: Double or Quad Flash mode is user selected at time of installation (permanent mount models only).
PART NO. FPMVOLTAGEFILTERDOME
COLOR*
12-48
80Double
or
65Quad
7Double
or
10Quad
5350AAA
5350ACC
5350CAA
CLEAR / CLEAR
AMBER / AMBER
AMBER / AMBER
AMBER / CLEAR5350CAC
12-48 80Double
5350AAA-VM
5350ACC-VM
5350CAA-VM
CLEAR / CLEAR
AMBER / AMBER
AMBER / AMBER
AMBER / CLEAR5350CAC-VM
AMPS
3.0
3.0 7
JOULES
15” / 0.4m®
CHASSIS
PERMANENT MOUNT
VACUUM MAGNET
42
Safety Director™
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
3015 15’ 12 18
3215 15’ 24 9
INCANDESCENT 3035 35’ 12 18
3235 35’ 24 9
3055 55’ 12 18
Safety Director™ System
SAE Class IISafety Director™ Bar
Flash Patterns
Incandescent or halogen directional warning power with a choice of flash patterns and user-friendly control, the Safety Director™ is the ideal product to steer traffic away from work zones and other dangerous situations.
PART NO. CABLE LENGTH
3015H 15’
HALOGEN 3035H 35’
3055H 55’
LIGHT SOURCE SAEVOLTAGE
12
MAX AMPS
LEFT ARROW (L)
CENTER OUT (C)
LEFT ARROW SOLID (LS)
CENTER OUT SOLID (CS)
RIGHT ARROW (R)
WIG WAG (WW)
RIGHT ARROW SOLID (RS)
SINGLE FLASH (AF)
8 user selectable flash patterns signal trafficto avoid hazards.
Wig Wag and Alternating flash patterns are certified to California Title 13 (3015, 3035, 3055).
Warranty: 2 years / Bulb = 90 days
SAE J845 Class II (3015H only)
Hi/Lo intensity switch.
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
Approvals
3000 Series
3015
12
12
18
18
18
43
Safety Director™
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. CABLE LENGTH LIGHT SOURCESAEVOLTAGE MAX AMPS*
Flash Patterns
LED Safety Director™ System
3315 15’ 12 7.0
3415 15’ 24 3.5
3335 35’ 12 7.0
3435 35’ 24 3.5
3355 55’ 12 7.0
LED
SAE Class ILED Safety Director™ Bar
* Excludes auxilary output
Extruded Aluminum housing and clear polycarbonate LED module (Illuminates amber).Epoxy sealed electronics for environmental protection.Controller features 15 amp auxiliary switch.
Wig Wag and Alternating flash patterns are certified to California Title 13. Warranty: 5 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
Features
High output directional warning with the added benefits of low amp draw, maintenance free, and long-life LED light source. The LED Safety Director™ is the definitive traffic direction lighting solution.
LEFT (L)
CENTER OUT (C)
LEFT SOLID (LS)
CENTER OUT SOLID (CS)
RIGHT (R)
WIG WAG (WW)
RIGHT SOLID (RS)
ALTERNATING QUAD FLASH (AQF)
3300 Series
™
3315 Illuminates Amber
SAE J845 Class IApprovals
44
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
AMPS
SAE Class IGrille/Deck/Dash & Window MountLED Light Heads
VOLTAGEPART NO.GRILLE/DECK/DASH
Steady/Double /Quad/Quint Flash
3600 Series (Single Head)
Utilizing ECCO’s proven LED module featur-ing four 1 watt LED’s, these grille/deck/dash and window mount LED lights offer flexible mounting options for both permanent and temporary applications. Multiple hardwired, grille/deck/dash versions are synchronizable and are supplied with both temporary and permanent mounting hardware. Window mount versions feature flash pattern switch and switched cigarette plug adapters with 'on' light.
3610A
0.3
0.2
12
24
3610X
3620X
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
™
Extruded aluminum housing with epoxy encapsulated electronics.
Steady Burn, Double, Fast Double, Quad and Quint Flash patterns plus integral alternating flash modes (12V models only).
Discrete units are colorless when not illuminated.
LED’s offer a long, maintenance free service life.
Multiple grille/deck/dash versions can be synchronized.
Warranty: 5 year
Temperature Range: -22F to +122F (-30C to +50C)
Features
ApprovalsSAE J845 Class I
CE, e
0.3
0.2
12
24
3615X
3625X
WINDOW
Grille/Deck/Dash: Multiple unit synchronization and flash pattern selection available via
switch wires at installation.
Window: Flash patterns are user selectable at any time via switch mounted on housing.
Suction cups, mounting tape,
shield foam and mounting
screws supplied with all
models (quantities dependent
on configuration)
Window mount versions
feature switched
cigarette plug with
"ON" light
Grille/Deck/Dash
Window
45
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SAE Class IGrille/Deck/Dash
& Window Mount LED Light Heads
PART NO. VOLTAGE* AMPS GRILLE/DECK/DASH
Steady/Double /Quad/Quint Flash
3600 Series (Twin Head)
Utilizing two of ECCO’s unique LED modules featur-ing four 1 watt LED’s per head, these grille/deck/dash and window mount LED heads offer both permanent and temporary mounting options. Multiple hardwired, grille/deck/dash versions are synchronizable and are also supplied with temporary mounting hardware. Window mount versions feature flash pattern switch and switched cigarette plug adapters.
3635AC
0.6123630XX
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
™
0.6123635XX
WINDOW
Grille/Deck/Dash: Multiple unit synchronization and flash pattern selection available via switch wires at installation.
Window: Flash patterns are user selectable at any time via switch mounted on housing.
*24V versions also available
Grille/Deck/Dash
WindowApprovals
SAE J845 Class I
CE, e
Extruded aluminum housing with epoxy encapsulated electronics.
Steady Burn, Double, Fast Double, Quad and Quint Flash patterns.
Discrete units are colorless when not illuminated.
LED’s offer a long, maintenance free service life.
Multiple grille/deck/dash versions can be synchronized.
Warranty: 5 year
Temperature Range: -22F to +122F (-30C to +50C)
Features
46
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
AMPSVOLTAGEPART NO.
3710/3760 SeriesSAE Class ISurface & Grommet MountLED Light Heads
These versatile LED’s are available in either surface (3710) or grommet (3760) mount configurations. Both models feature four 1-watt LED’s, offer multi-ple flash patterns, synchronization capability and SAE Class I operation. The surface mount model features lambertian LED’s and a unique optic while the grommet mount version uses side-emitting LED’s and unique reflector design to provide outstanding light output. The 3760 model also has the added benefit of two California Title 13 flash patterns.
3710A
0.3
0.2
0.3
0.2
12
24
12
24
3710X
3720X
3760X
3770X
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
Multi Flash (9) + Title 13 (3760/3770 only) ™
Multi Flash (9) + Title 13: Multiple unit synchronization and flash pattern selection available via switch wires at installation. (T13 only available on 3760/3770 models)
SURFACE
GROMMET
FeaturesRobust die-cast coated aluminum hous-ing with epoxy encapsulated electronics (3710, surface mount model).
Tough clear polycarbonate lens with reinforced nylon housing and urethane encapsulated electronics (3760, grommet mount model).
Grommet mount model fits standard oval rear lighting grommet (order separately).
Steady Burn, Double, Fast Double, Quad and Quint flash patterns plus four inte-gral alternating flash modes (12v only). 3760, grommet mount model also features two Cal. T13 flash patterns.
Discrete units are colorless when not illuminated.
Multiple units can be synchronized.
LED’s offer a long, maintenance free service life.
Warranty: 5 years
Temperature Range: -22ºF - +122ºF (-30ºC - +50ºC)
ApprovalsSAE J845 Class I (3710/3720 all colors, 3760/3770 amber & red only in vertical orientation).
California Title 13 (3760/3770 amber, blue and red only).
CE, e
A9895
PART NO. PART NO.
R2160GO
Grommet Mounting Box
3760 Series Accessories
3710
3760
47
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
1.5 [39]
1.3 [34]
3.7 [94]
3730 SeriesSAE Class II
Surface MountLED Light Head
This compact LED has very similar features to the 3710 Series but is considerably smaller, comprising only three 1-watt LED’s. The 3730 provides a budget conscious option where a premium light with SAE Class II opera-tion is required. Its compact size and ability to fit confined mounting locations, multiple flash patterns, synchronization capability, zero maintenance and 5 year warranty are just some of its many benefits. A range of accessory brackets is also available to further maximize mounting options.
3730A
ApprovalsSAE J845 Class II
CE, e
IP Rating 67
FeaturesRugged die-cast coated aluminum housing with urethane encapsulated electronics.
14 flash patterns including 3 integral alternating flash modes.
Discrete units are colorless when not illuminated.
Multiple units can be synchronized.
LED’s offer a long, maintenance free service life.
Warranty: 5 years
Temperature Range: -22ºF - +122ºF (-30ºC - +50ºC)
AMPSVOLTAGEPART NO. SURFACE
0.212-243730X
Multi Flash (14) ™
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
Multi Flash (14): Multiple unit synchronization and flash pattern selection available via switch wires at installation.
UNIVERSAL TRUNK DECK WINDOW LICENCE
3730 Series Accessories
A3730BKT A3730TNK A3730DCK A3730WIN A3730LIC
Mounting Brackets
Steady BurnSingleFast SingleDoubleFast DoubleTripleQuadQuintFlickerConstant FlickerIntegral Double AlternatingIntegral Fast Double AlternatingIntegral Quad AlternatingCycle
Multi Flash Patterns (14)
48
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SAE Class ISurface & Grommet MountLED Light Heads
VOLTAGE AMPSPART NO.
0.9
0.6
12
24
3810X
3820X
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
3810/3860 Series directional LED’s comprise 42 individual 1/4 watt LED’s with individual reflectors to provide truly outstanding light output in a very cost effective package. Available in either surface (3810) or grommet (3860) mount configurations these quad flash LED light heads offer fit and forget, maintenance free operation and low amp draw.
3810A
3810/3860 Series
Quad Flash ™
0.9
0.6
12
24
3860X
3870X
SURFACE
GROMMET
Quad Flash: Non-synchronizable, quad flash operation
3860 Series Accessories
A9895
PART NO. PART NO.
R2160GO
PART NO.
Grommet Mounting BoxAdapter
A3860ADPT
Converts surface mount light to grommet mount
Tough, clear polycarbonate housing with urethane encapsulated electronics.
High output 75 FPM quad flash operation.
Discrete units are colorless when not illuminated.
Grommet mount versions fit standard oval rear lighting grommet (order separately).
LED’s offer a long, maintenance free service life.
Warranty: 5 year
Temperature Range: -22F to +122F (-30C to +50C)
Features
ApprovalsSAE J845 Class I (amber, blue, red only)
CE, e
3810
3860
49
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
3900 SeriesSAE Class II
Grommet MountLED Light Heads
These grommet mount LED directional lights offer long-life, low maintenance operation with no moving parts or bulbs/flashtubes to break or replace. Simply fit in standard oval and round rear lighting grommets.
ROUND
3900 Series Accessories
R2140GR
OVAL
R2160GO
ROUND
A9894
OVAL
A9895
3940A
3960A
Grommets Mounting Boxes
PART NO.
ROUND
SHAPE
OVAL
AMPSVOLTAGE
0.2123940X
0.2
Double/Quad Flash ™
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
3960X 12
Double/Quad Flash: Double or Quad flash mode selected at installation, non synchronizable
Vibration and shock resistant construction.
Warranty: 2 years
Temperature Range: -22°F to +122°F (-30°C to +50°C)
High output LED’s offer low maintenance, long life and low current consumption.Ultrasonically sealed housing.
Fits in standard oval or round rear lighting grommet (order seperately).
Features
ApprovalsSAE J845 Class II (amber & red only)
3940
3960
50
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
9010 Series -Concealed Warning Light
VOLTAGE AMPSPART NO.
0.2- 0.5129010X
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
The 9010 Series is a high intensity directional LED warning light specifically designed for vehicle headlight and tail light applications. The 9010’s design produces directional light output and can be positioned to project light directly through the front of the headlight or back at the reflective light casings to produce a less intense, indirect flash. The LED design also offers major advantages over strobe versions. All control electronics are situated in a sealed, in-line driver module so no remote power supply is required. Multiple flash patterns are included and multiple units can be synchronized to flash alternately or simultaneously.
9010
Multi Flash (16) ™
1" HOLE
Four 1-watt high-intensity LED’s provide exceptional warning.
Directional light dispersion offers choice of positioning to produce direct, intense flash or indirect, less intense flash.
16 Flash patterns including single, double, triple, quad, deci and cycle.
Multiple heads are synchronizable (simultaneous or alternating operation).
Colorless when not illuminated.
In-line waterproof driver module eliminates the need for a remote power supply.
UV stabilized polycarbonate lens, nickel plated housing and 9’ cable.
Warranty: 5 year
Temperature Range: -22F to +122F (-30C to +50C)
HIDE-A-LED™ systems offer huge advantages over traditional strobe systems.
Low voltage (no high voltage cables).
Low amp draw (synchronize up to 20 units).
No remote power supplies (simple installation).
Multiple flash patterns & synchronization.
Zero maintenance.
Features
Multi Flash (16): Multiple unit synchronization and flash pattern selection available via switch wires at installation.*Blue and Clear versions will also operate at 24v.
0.93 [24]
4.25 [108]
0.49 [12]
1.49 [38]
0.97 [25]
1.63 [41]
51
LED directional lights
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
0.93 [24]
4.25 [108]
0.49 [12]
- 9011 SeriesConcealed Warning Light
VOLTAGE
PATTERN PATTERN
AMPS
DESCRIPTION DESCRIPTION
PART NO.
NO. NO.
0.2- 0.512
1
2
3
4
5
6
7
8
Quad Flash
Double Flash
Triple Flash
DeciBlast
Single Flash
Mega Flash
Triple + Burst
Steady Burn
75 Quad FPM
75 Double FPM
92 Triple FPM
85 Deci FPM
75 Single FPM
114 Single FPM
85 Triple + Burst FPM
Always On
Cycle
Double - Triple + Burst
Cycle Classic
Quad - Mega
Single - Quad
DeciBlast - Quad
Single - Triple - DeciBlast
Mega - Triple + Burst
Cycle through patterns 1-7
2 Double, 2 Triple + Burst cycle
1 Double, 1 Quad, 2 Mega cycle
3 Quad, 4 Mega cycle
2 Single, 2 Quad cycle
2 DeciBlast, Quad cycle
2 Single, 2 Triple 2 DeciBlast cycle
1 Mega, 1 Triple + Burst cycle
9
10
11
12
13
14
15
16
9011X
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red
The 9011 Series is a high intensity directional LED warning light specifically designed for vehicle headlight and tail light applications. The 9011’s optic design produces wide angle light dispersion and maximizes secondary light output reflected off the vehicle light casing. In addition the LEDs’ low profile allows mounting in small, confined light cas-ings typical of tail lights and modern car headlights. The LED design also offers major advantages over strobe versions. All control electronics are situated in a sealed, in-line driver module so no remote power supply is required. Multiple flash patterns are included and multiple units can be synchronized to flash alternately or simultaneously.
9011
Multi Flash (16)
Multi Flash (16) Pattern Guide
™
1" HOLE
Four 1-watt high-intensity LED’s provide exceptional warning.
Wide angle light dispersion maximizes light casing reflection and mounting options.
16 Flash patterns including single, double, triple, quad, deci and cycle.
Multiple heads are synchronizable (simultaneous or alternating operation).
Colorless when not illuminated.
In-line waterproof driver module eliminates the need for a remote power supply.
UV stabilized polycarbonate lens, nickel plated housing and 9’ cable.
Warranty: 5 year
Temperature Range: -22F to +122F (-30C to +50C)
Features
Multi Flash (16): Multiple unit synchronization and flash pattern selection available via switch wires at installation.*Blue and Clear versions will also operate at 24v.
1.50 [38]
0.99 [25]
1.06 [27]
HIDE-A-LED™ is a trademark of Nova Electronics, Inc. Colchester CT
52
lighting systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
VOLTS
4
PART NO. COLOR
CLEAR
9460-1
FPMJOULES LOWHIGH
13 15 7 1112-24
AMBER
9460-15
70 65
VOLTAGE APPROVALSFPMWATTSPART NO.
60W12-24 CE, e
QUADDBL
9460 6570
4 Head DOT RemoteStrobe System
Power supply has compact die-cast aluminum housing and epoxy encapsulated electronics.
Hi/Lo intensity and Double/Quad flash operation. Designed for efficient heat dissipation for longer life.
Hide-away and directional/360° strobe systems available.
Weatherproof housing and connections allow mounting anywhere on vehicle.
Short circuit protection, output power regulation and flashtube fault detection.
Warranty: Power Supply = 2 years Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to + 50°C)
Approvals
Features
SAE J1318 (9460 only)CE, e (9460 only)
DBLQUADDBLQUADDBL QUAD
The feature packed 9400 Series Power Supply is designed and built to withstand the toughest applications. Weatherproof connections and epoxy-filled housing with capacitor heat dissipation cradles are why this power supply offers unrivaled protection against heat, vibration, dust and moisture. Available in 3 standard system configurations.
9460
9400 Series
CABLE15’ 20’ 25’ 35’
29460-11
29460-18
29460-14
9460-19
49460-22
2
2
4
2
Hide-Away System®
13 15 7 1112-24 70 659460-16
9460-20
4
2
4
2
MODE
HI / LO
System Comprises: 1 PSU, 4 Hide-Away tubes, 4 cables
Power Supply®
53
lighting systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
2 Head DOT RemoteStrobe System
System Comprises: 1 PSU, 2 oval light heads, 2 cables. (Mounting grommets not included.)
System Comprises: 1 PSU, 2 Hide-away tubes, 2 cables.
9200 Series
The 9200 Series 2 Head Power Supply is feature packed and built to withstand the toughest applications. Due to its unique heavy-duty design the unit can be mounted anywhere on the vehicle, inside or out. The power supply, strobe heads and cables can be purchased individu-ally or in a variety of standard systems.
9230
®
®
Power Supply
Hide-Away Systems
Directional Systems®
JOULES
JOULESPART NO. VOLTS MODECOLOR CABLEQUADDBL
LOWQUADDBL
HIGHQUADDBL
PART NO.
VOLTAGE APPROVALSFPMWATTSPART NO. MODE
30W HI / LO12-24 CE, e
QUADDBL
9230
VOLTS MODE
12.5 13.5 6.8 1015’
35’
COLOR CABLE
CLEAR9230-1
9230-3HI / LO
FPM
FPM
QUADDBL
65
65
70
70
12.5 13.5 6.8 1015’
35’
12-24AMBER9230-4
9230-6
HI / LO
APPROVALS
70 CE, e
LOWQUADDBL
HIGHQUADDBL
12.5 13.5 6.8 1015’
35’
12-24
AMBER9230-2
9230-5HI / 6570
65
Power supply has compact die-cast aluminum housing and epoxy encapsulated electronics.
Hi/Lo intensity and Double/Quad flash operation.
Hide-away or directional strobe systems available.
Weatherproof housing and connections allow mounting anywhere on vehicle.
Short circuit protection, output power regulation and flashtube fault detection.
Warranty: Power Supply = 2 years Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to + 50°C)
Approvals
Features
SAE J1318 Class II (9230 only)
CE, e (Except Hide-away)
54
lighting systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
9460-159460-9
9460-169460-209460-249460-139460-179460-219460-109460-239460-1
9460-119460-149460-189460-199460-229460-89460-7
222
2444444
35'9935
NON-SHIELDED
9200 / 9400 Series Components
HIDE-AWAY
OVAL
360°
REPLACEMENT TUBE: R9000FT
Medium
Low
Amber only.
REPLACEMENT TUBE: R6501FT
Amber only.
9050X 12-24 LOW
MEDIUM
129001X
VOLTAGEPART NO.
129006X
VOLTAGEPART NO. PROFILE
9070X 12-24
®
Strobe Light HeadsReplace X in part number with desired color: A = amber, B = blue, C = clear, R = red
VOLTAGE
STROBE LIGHT HEADS
PART NO. HIDEAWAYSCLEARAMBER CLEARAMBER
360°AMBER
CABLESSHIELDED
15'OVALS
20' 25' 35'CLEAR 15' 20' 25'9001C9001A 9006C9006A 9070A 9915S 9920S 9925S 9935S9070C 9915 9920 9925
12
4444422222
2
22
2
2
2
2
4
2
2241
42
2
21
2
2
2
22
4
2
1
2
2
4
2
2
422
Quick Reference 9460 System Configurations
21
A9000AMPSUPER SEALCONNECTOR
PLUS PINS
R9000PCH POWER CABLE
PART NO.
9915
9935
9950
TYPE
Non-ShieldedCable
ShieldedCable
LENGTH
15’
35’
50’
9915S
9935S
9950S
15’
35’
50’
9920
9925
20’
25’
PART NO. DESCRIPTION
Cables & Adapters
9900-BULK 500’ roll
55
lighting systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
VOLTAGE
2000 SeriesDOT Remote Strobe
& LED Systems
VOLTAGE AMPS
0.612
PART NO.
2025
Navigator® Systems
1-2000 CONTROL BOX
2-2160A OVAL LED’S
INCLUDES
2.01220301-2000 CONTROL BOX
2-2160A OVAL LED’S
1-2570A 360° STROBE
2000
2570A
2160A
The Navigator® lighting system offers ultimate control of all your vehicles warning lights. 8 Channels, 8 Flash patterns, a deluxe control unit and the ability to combine Strobe and LED make the Navigator® a highly flexible lighting system.
® ™
In-cab control box with LED flash indicatorsand auxiliary strobe light control switch.
LED systems offer low maintenance and long life.
8 user-selectable flash patterns.
Warranty: 2 years / Flashtube = 6 months
Temperature Range: -22°F to +122°F (-30°C to + 50°C)
Approvals
Features
SAE J1318 Class II(2550, 2570 & 2350CAA only)
SAE J1318 Class I (2650, 2655 & 2670CAA only)
CE
Uses standard 14-18 gauge wire (user supplied).
All heads double flash simultaneously
Channels alternate at a variable rate: slow to fast to slow
Channels alternate single, double, triple, quad, quint, and back to single
Channels alternate in five flash mode
Channels alternate in four flash mode
Channels alternate in three flash mode
Channels alternate in two flash mode
Channels alternate in fast single flash mode
FPM (each channel) FLASH PATTERNSMODE
Emergency
Bounce
Sequence
Quint
Quad
Triple
Double
Hyper Flash
86
Variable
Variable
49
61
62
64
102
HEADSPART NO.
8122000
Navigator® Control Box
56
lighting systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. VOLTAGE AMPS
2.0122031
INCLUDES
1- 2000 CONTROL BOX
2-2140A ROUND LED’S
1-2570A 360° STROBE
3.51220401-2000 CONTROL BOX
2-2160A OVAL LED’S
2-2570A 360° STROBES
3.51220451-2000 CONTROL BOX
2-2160A OVAL LED’S
1-2350ACC 15” STROBE BAR
6.41220651-2000 CONTROL BOX
2-2160A OVAL LED’S
2-2350ACC 15” STROBE BAR
Navigator® Systems ®
™
Triggered LED’s for use only with 2000 control box.
PART NO.
2140X
2160X
SHAPE
OVAL12
VOLTAGE
ROUND12
2110X 12 RECTANGLE
A3860ADPT Adapter Converts 2110X Surface Mount Light to oval Grommet Mount
PART NO. DESCRIPTION
GROMMET
SURFACE
GROMMET ADAPTER
Navigator® LED Light Heads ™
Replace X in part number with desired color: A = amber, B = blue, C = clear, R = red2000 Series Components
2000 Series (continued)
57
lighting systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Flashtube
(continued) 2000 Series
PART NO.
PART NO. VOLTAGE SAE CLASS
12
12
INTENSITY
LOW
MEDIUM
2650X
2655X
2670X
HIGH
SMART
HIGH
SMART
MEDIUM
2675X
2550X
2570X
BLUE CLEAR GREEN REDAMBERPROFILE
R6050LCR6050LALOW R6050LRR6050LB R6050LG
R6070LCR6070LAMEDIUM R6070LRR6070LB R6070LG
2000 Series Replacement Parts
VOLTAGE SAE CLASS
12
COLOR
AMBER AND
CLEAR ONLY
2350AAA
2350ACC
2350CAA
CLEAR / CLEAR
AMBER / AMBER
AMBER / AMBER
AMBER / CLEAR2350CAC
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red
AMBER, BLUE, CLEAR AND RED ONLY
PROFILE
LOW
MEDIUM
Navigator® 15” Strobe Minibars®
LENSDOME
Triggered strobes for use only with 2000 control box.
Triggered strobes for use only with 2000 control box.
3 BOLT FLANGE / 1” PIPE
3 BOLT FLANGE / 1” PIPE
Low
Medium Low
Medium
Navigator® 360° Strobe Light Heads®
PART NO.
R6501FT
DomesLenses
R5300LA
AMBER
R5300LB
BLUE
R5300LC
CLEAR
R5300LR
RED
12
58
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Designed to meet all the harsh operational requirements of any fleet’s equipment, ECCO’s unique 400, 600 & 800 Series alarm design uses a reverse mount-ed speaker providing unrivalled durability. These alarms are so robust that an ECCOLIFE™ war-ranty covering the alarm for the life of the vehicle is offered on all models. Look for the ECCOLIFE™ logo.
The unique positioning of the speaker facing the inside of the housing allows for high pressure washing or steam cleaning with-out risk of speaker damage. In addition it offers no place for fine dust to build up and reduce the alarms efficiency. Epoxy encapsu-lated circuit boards offer further protection from dust, moisture and vibration.
400 Series*
200 Series*
40 Series*
500 Series*
600 Series*
800 Series*
SVX™*
700 Series
Built to Last
Look For The OriginalOver the last 35 years ECCO has become the worlds leading back-up alarm supplier. That’s why ECCO’s range of back-up alarms offers the most extensive selection in the industry, covering a wide variety of applications & environ-ments. We are committed to bringing ground-breaking products to the back-up alarm industry.
BackFront
Reverse mounted speaker
Reverse mount designoffers no place fordirt build up.
Design allows for high pressure washing without damaging alarm.
Side View Cutaway
Epoxy encapsulatedcircuit board
Front Reverse mounted speaker
Circuit board
Exploded View
The distinctive ECCO trademarks, trade dress, product designs, and configurations shown here with asterisks are recognizable throughout the world as unique to ECCO. They are synony-mous with product quality and conformance to industry standards and are the sole and exclusive property of ECCO. All rights reserved.
U.S. Trademark Registrations (Alarms): 1,301,314; 2,140,618; 1,414,605; 1,803,136; 1,990,568; 2,501,189; 2,915,640; 3,003,235
U.S. Patents (Alarms): 6,211,774; 6,166,623; 5,315,288; 4,994,800; D466,430; D485,201; D514,010 Other patents pending
Various international trademarks & patents also held for more information contact ECCO Customer Service.
ECCO® Trademarks & Patents
dB(a) output measured at a distance of 4’ / 1.2m
’S LINE OF BACK-UP ALARMS
AMECA CertificationMany of ECCO’s alarms are now inde-pendently certified by AMECA to meet SAE J994 requirements, ensuring our alarms meet customer’s highest qual-ity expectations. Our Engineering Test Lab is certified by the Automotive Manufacturers Equipment Compliance Agency (AMECA) to perform test-ing as per the Society of Automotive Engineers (SAE) requirements. ECCO test reports are reviewed by AMECA and Notice of Equipment Compliances are issued. These are denoted here as AMECA certified and indicated on the SAE Indicator shown with each alarm.
59
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Warranty:
Indicator printed in blue
Life of Vehicle Warranty
Indicator printed in red
This designation indicatesalarm monitors theambient noise level and automatically adjusts to a minimum of 5 dB(A) above ambient noiselevel, up to a maximum rated output.
Special Feature
This designation indicatesalarm output can be set tovarious output levels.
Special Feature
AMECA Certification
SAE Type[dB(A) level]
(Where applicable)
SAE Classification IndicatorFeatured on the following pages, the SAE Classification Indicator is designed to aid product selection, making it easier for customers to purchase the correct alarm for their application. In addition to SAE type the indicator also designates the alarm features, warranty, and AMECA certification where applicable.
SAE TYPE dB(A) FIXED dB(A)
ALARMS
112
107
102
97
87
82
77
Other
872p.71
840p.70
SA955p.62
A
B
D
E
F
820p.70
410 p.65
876 p.71
850 p.70
210 p.67
830 p.70
530 p.66
610 p.68
505 p.66
SMART ALARMS®
(SELF ADJUSTING)SWITCHABLE ALARMS (MANUALLY ADJUSTABLE)
SV212 p.61
SV297 p.61
SV207 p.61
SV202 p.61
450 p.65
520 p.66
630 p.68
510 p.66
580 p.66
585 p.66C
575 p.67
435 p.64
415 p.64
Quick Selector GuideHelping you choose the right alarm.
SA950p.62
SA931p.63
SA980p.63
SA901p.63
SA951p.62
SA920p.63
SA914p.63
SA917p.63
SA940p.62
777p.69
™
60
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SoundVector™ is a licensed trademark of American Technology Corporation, San Diego, California, USA
Focused SoundVector™ Sound PatternSound is confined to specific area at rear of vehicle.
Conventional Back-Up Alarm Sound PatternSound is omni-directional and travels outside the hazard zone.
90º
270º
180º 0º
45º
225º
135º
315º
90º
270º
180º 0º
45º
225º
135º
315º
Center Point = Alarm Position
incorporating
Noise Pollution Solutions™
Work site noise escaping in or nearby residential areas is the No. 1 issue facing back-up alarm users today.
Conventional back-up alarms are effective!• Their sound is recognized the world over;• Their warning signal is heard and understood by the people they are installed to protect;• They reduce accidents and save lives.
Keep the recognizable warning sound but have it only heard by those in the hazard zone, while improving upon the effectiveness of the warning.
ECCO has various solutions to cost-effectively customize the reverse warning of any fl eet, protect workers and the public, while improving safety. SVX™ represents the ultimate solution to back-up alarm noise pollution, without compromising the universally recognized back-up alarm warning signal.
The Issue
The Facts
The Challenge
The Answer
Don’t compromise safety!Use a back-up alarm that BEEPS!
61
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
107dB(A)
102dB(A)
97dB(A)
112dB(A)
- SVX™ SeriesFocused Sound Safety™
SoundVector™ technology is the ultimate directional sound delivery platform. ECCO has developed the SVX™ back-up alarm based on this new technology to contain sound where it is needed, in the hazard zone behind a vehicle. Patent-pending SoundVector™ technology is used to cancel out sound waves that would normally travel outside the hazard zone, resulting in Focused Sound Safety™. By focusing sound in the hazard zone, SVX™ effectively addresses major problems currently associated with conventional back-up alarms: noise pollution and driver irritation. SVX™ back–up alarms feature the globally recognized BEEP...BEEP sound of a traditional back-up alarm.
107 0.812-24SV207
102 0.512-24SV202
97 0.712-24SV297
SV212 112 1.212-24
PART NO. dB(A)VOLTAGE AMPS
Steam cleanable and pressure washable.
Solid-State electronics are reverse polarity, voltage spike and surge protected.
Temperature Range: -40˚F to +185˚F (-40˚C to +85˚C)
ECCOLIFE™ Warranty
Focuses warning sound in the hazard zone behind the vehicle.
Uses the traditional “Beep-Beep” warning sound recognized world-wide as the signal for a reversing vehicle.
Robust glass-filled nylon housing designed to withstand the most demanding applications.
Epoxy encapsulated electronics provides protection against vibration, dust and moisture.
Features
7.1 [180]6.2 [158]
5.2 [133]
4.3 [109]
3.5 [88]
62
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. dB(A)VOLTAGE AMPS
PART NO. dB(A)VOLTAGE AMPS
PART NO. dB(A)VOLTAGE AMPS
For use with standard 4.5” rear lighting grommet (order separately).
Reverse mounted speaker design ensures longer alarm life.
Directs warning to rear of vehicle.
ECCOLIFE™ Warranty
SA940 87-112 0.612-24
Compact size and universal mounting pattern maximizes location options.
Self-grounding.
2-Year Warranty
SA950 82-102 0.412-24
SA951 77-97 0.212-48
Noise Pollution Solutions™ 0.4 Seconds 0.5 Seconds 0.1 Seconds
LISTENS1. SOUNDS2. SHUTS DOWN3.
CYCLE REPEATS
Mounting Grommet: R2140GR
For use with standard 4.5” rear lighting grommet (order separately).
2-Year Warranty
How Smart Alarms® adjust to the environment
Mounting Grommet: R2140GR
500 Series
400 Series
Directs warning to rear of vehicle.
ECCO’s range of Smart Alarms® are the worlds first self-adjusting back-up alarms. The alarms featured on these pages constantly measure ambient noise and adjust their sound level, creating a volume that is safe without being annoying or contributing to noise pollution. Smart Alarms® eliminate the need for constant manual adjustment and help prevent intentional alarm disconnection.
40 Series
SA955 82-102 0.412-24
100% solid state electronic circuit boards are epoxy sealed to protect against dust, moisture and vibration.
Reduces irritation and noise complaints.
Designed to meet SAE J994, Type F
Eliminates confusion on which alarm to choose.
Temperature range: -40°F to +185°F (-40°C to +85°C)
63
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. dB(A)VOLTAGE AMPS
Compact and robust design ideal for demanding applications inmedium noise environments.
Reverse mounted speaker design ensures longer alarm life.
ECCOLIFE™ Warranty
82-102 0.2
600 Series
SA901 82-107 0.312-24
SA931 82-102 0.212-48
SA980 36-80
PART NO. dB(A)VOLTAGE AMPS
Steel housing and rugged construction for demanding applications have made this ECCO’s most popular Smart Alarm®.
Reverse mounted speaker design ensures longer alarm- life.
ECCOLIFE™ Warranty
SA917 87-112 0.412-24
800 Series
PART NO. dB(A)VOLTAGE AMPS
Steel housing and rugged construction with integral bracket includingpopular OEM mounting pattern.
Reverse mounted speaker design ensures longer alarm life.
ECCOLIFE™ Warranty
SA914 87-112 0.412-24
800 Series
PART NO. dB(A)VOLTAGE AMPS
Popular OEM design for rugged construction applications.
2-Year Warranty
SA920 97-112 0.612-24
700 Series
64
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Grommet mount reduces installation time, requiring no tools.
2 Year Warranty
Temperature range: -40°F to +185°F (-40°C to +85°C)
Epoxy sealed against dust, moisture and vibration.
Directs warning to rear of vehicle.
For use with standard 4.5”rear lighting grommet(order separately).
40 Series
Mounting Grommet: R2140GR
Models 415 and 435 are AMECA certified to SAE J994
102dB(A)
PART NO. dB(A)VOLTAGE AMPS
97dB(A)
415
82-102dB(A)
97 0.212-24 SAEJ994
435 102 0.312-24 SAEJ994
SA955 82-102 0.412-24
Features
65
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
87-112dB(A)
SA940 87-112 0.6
PART NO. dB(A)VOLTAGE AMPS
112dB(A)
12-24
450 112 0.412-36
97dB(A)
410 97 0.112-36
400 SeriesGrommet mount reduces installation time anddirects warning to rear of vehicle.
ECCOLIFE™ Warranty
Temperature range: -40°F to +185°F (-40°C to +85°C)
Epoxy sealed for protection against dust, moisture and vibration.
For use with standard 4.5”rear lighting grommet(order separately).
Mounting Grommet: R2140GR
Models 410 and 450 are AMECA certified to SAE J994
Features
SAEJ994
SAEJ994
66
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
82-10277-97
dB(A)
102dB(A)
PART NO. dB(A)VOLTAGE AMPS
97dB(A)
500 Series
510 0.212
87dB(A)
520 97
97
97
0.212-24
585 0.112-48
530 102 0.212-24 SAEJ994
SAEJ994
SAEJ994
SAEJ994
Models 510, 520 and 505 are AMECA certified to SAE J994
505 0.112-24
580
87
87 0.112-80
SAEJ994
SAEJ994
SA950
77-97
82-102 0.412-24
SA951 0.212-48
Compact size and universal mounting bracketmaximizes location options.
2 Year Warranty
Temperature range: -40°F to +185°F (-40°C to +85°C)
Self grounding.
Sealed in epoxy for protection against dust, moisture, and vibration.
Features
67
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Temperature range: -40°F to +185°F (-40°C to +85°C)
PART NO. dB(A)VOLTAGE AMPS
PART NO. dB(A)VOLTAGE AMPS
575 Series
107dB(A)
575 107 0.312-24
200 Series
SAEJ994
AMECA certified to SAE J994
97dB(A)
210 97 0.112 SAEJ994
Compact size and universal mounting bracketmaximizes location options.
2 Year Warranty
Temperature range: -40°F to +185°F (-40°C to +85°C)
Epoxy sealed to protect against dust, moisture and vibration.
Works on positive and negative ground systems.
Reverse polarity, voltage spike and surge protected.
Features
Designed for mounting in areas where a compactprofile is required.
2 Year Warranty
Universal mounting bracket covers a wide range of popular mounting applications.
Features
68
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
600 Series
PART NO. dB(A)VOLTAGE AMPS
610 0.197dB(A)
107dB(A)
97
82-10782-102
dB(A)
SAEJ994
Models 610 & 630 are AMECA certified to SAE J994
12-36
SA901 82-107 0.3
630 107 0.412-36 SAEJ994
12-24
SA931 82-102 0.212-48
SA980 82-102 0.236-80
Compact housing and rugged constructiondesigned for demanding applications.
ECCOLIFE™ Warranty
Temperature range: -40°F to +185°F (-40°C to +85°C)
Sealed in epoxy to protect against dust, moisture and vibration.
Reverse mounted speaker enhances sound and protects the alarm from dust and moisture ingress.
Features
69
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
700 Series
777 Shown
PART NO. dB(A)VOLTAGE AMPS
SA920 97-112 0.612-24 97-112dB(A)
97/107/112SWITCHABLE777
97
107
112
0.512-24 SAEJ994
Switchable: Volume selected via waterproof switch. Factory set to 112dB(A)
dB rating user selected via switch
Temperature range: -40°F to +185°F (-40°C to +85°C)
Sealed in epoxy to protect against dust, moisture and vibration.
Meets OEM design for rugged construction applications.
2 Year Warranty
SA920 supplied with grille plate.
Features
70
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
ECCOLIFE™ Warranty
PART NO. dB(A)VOLTAGE AMPS
SA917 87-112 0.412-24
830 0.412-36
850 112 0.412-36
0.4
107dB(A)
112dB(A)
0.412-36
840
820
12-36
107
97/112dB(A)
dB rating user selected at time of installation
REVO™
dB rating user selectedat time of installation
87/107dB(A)REVO™
87-112dB(A)
SAEJ994
SAEJ994
SAEJ994
SAEJ994
800 Series
97
112
87
107
REVO™: Volume selected at time of installation.
REVO™: Volume selected at time of installation.Models 820, 830, 840 & 850 are AMECA certified to SAE J994
Steel housing and rugged construction fordemanding applications.
Temperature range: -40°F to +185°F (-40°C to +85°C)
Sealed in epoxy for protection against dust, moisture and vibration.
Reverse mounted speaker enhances sound and protects the alarm from dust andmoisture ingress.
Features
71
back-up alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Models 872 & 876 are AMECA certified to SAE J994
PART NO. dB(A)VOLTAGE AMPS
112dB(A)
PART NO. dB(A)VOLTAGE AMPS
PART NO. dB(A)VOLTAGE AMPS
97
112
800 Series
SA914 87-112 0.4 87-112dB(A)
97/112dB(A)
dB rating user selected at time of installation
REVO™
876 112 0.4 SAEJ994
0.4872 SAEJ994
REVO™: Volume selected at time of installation.
12-24
12-36
12-36
ECCOLIFE™ Warranty
All the great features of the 800 Series along with a bracket that includes the same mounting pattern popular with OEM’s.
Features
72
warning alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
AMPSPART NO. dB(A)VOLTAGE SAE
0.9
0.8
12
24-48
FH575
FH577
107
107
FORWARDHORN
L SAEJ1105
Specifically designed for use on SCR controlled electric vehicles orheavy vibration IC vehicles.
2 Year Warranty
AMPSPART NO. dB(A)VOLTAGE SAE
0.5N/A12-24CT530-2LDW 102 CONSTANTTONE
Constant 102 decibel warning in a compact housing with 18” leadwire connection.
2 Year Warranty
AMPSPART NO. dB(A)VOLTAGE SAE
0.3
0.312-24DF532
102 BACK-UP
102 DUAL TONE
DUALFUNCTION F SAE
J994
Dual function alarm provides back-up alarm and dual tonefeatures in a compact housing.
2 Year Warranty
SAE type F in back-up mode only.
73
warning alarms
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
AMPSPART NO. dB(A)VOLTAGE
AMPSPART NO. dB(A)VOLTAGE SAE
PART NO. VOLTAGE AMPS CONTACT
1.9
1.9
110-000
111-000
WARNING ALARM& LIGHT
SINGLE CONTACT BAYONET
WEDGE
Warning alarm suitable and warranted fornon-commercial vehicles only.
90 Day Warranty
0.1
0.1
MS90
MS90-24
90
90
MINIALARM
Not intended for use as a back-up alarm.
DT500FP features fast pulse, dual tone warning and leadwire connection.
Cost effective dual tone warning in a compact housing.
2 Year Warranty
0.5DT500 97DUALTONE
N/A
0.9DT500FP-LWC 102 FAST PULSE N/A
12-24
12-24
12
24
12
12
110-000Not intended for use as a commercial back-up alarm.
Suitable and warranted for non-commercial vehicles only.
Combination back-up alert and bulb.
90 Day Warranty
74
warning alarms / sensors
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. dB(A)VOLTAGE AMPS
0.1 4-40 SCREW201120 80 FAST PULSE
SLOW PULSE
DUAL MODE
LOUDCONTINUOUS
CONTINUOUS
CONNECTION
PART NO.
PART NO. DESCRIPTION
SPEEDOMETER CABLE ADAPTERRMS1000DRIVE TIP .203 ROUND MALE TANG
DRIVE TIP .203 ROUND FEMALE TANG
DRIVE TIP .104 MALE SQUARE
DRIVE TIP .104 FEMALE SQUARE
WCT301
WCT300
WCT302
WCT303
WCT304
SPEEDO CABLESENSOR
0.1 4-40 SCREW204120 80
0.1 4-40 SCREW208120 80
0.1202110 80
0.1 4-40 SCREW202120 80
0.1 4-40 SCREW209120 68
Audible Signal Devices
1/4”MALE SPADE
PART NO.
DS-1500DRIVE LINESENSOR
Meets California refuse truck alarm device requirements.
MAX AMPS
5.0
Reverse Motion Sensors
For use with mechanical speedometer.
Activates back-up alarm if vehicle moves backwards.
1 Year Warranty
dB(A) measured at 1’ / 30cm
Polarity protected, fully encapsulated power supply.
Piezo electronic design offers low amp draw.
Panel mount 1.25” hole.
6 Month Warranty
Non-contact switch for longer life.
1 Year Warranty
For use with electronic speedometer.
Activates back-up alarm every time vehicle moves backward in any gear...ignition on or off.
REPLACEMENT PARTS
12-48
12-48
12-48
12-48
12-48
12-48
Continuous & Fast Pulse
75
switches & back-up bulbs
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. VOLTS MAX AMPS TYPE
Weather resistant.
For light duty vehicles not equipped with back-up lights.
Single pole, single throw switch with single direction movement.
1 Year Warranty
SW10
SINGLE DIRECTION
SWITCHNORMALLY OPEN12-24 VDC 5.0
PART NO. VOLTS MAX AMPS TYPE
SW15 NORMALLY OPEN OR CLOSED
Metal housing, includes mounting bracket and waterproof compression fitting.
For vehicles not equipped with back-up lights.
Single pole, double throw switch with 360° movement.
1 Year Warranty
12-80 VDC 10.0360°
SWITCH
PART NO. VOLTS MAX AMPS TYPE
Metal housing, includes mounting bracket and waterproof compression fitting.
For vehicles not equipped with back-up lights.
Single pole, double throw switch with 360° movement.
Large, robust switch for rugged applications.
1 Year Warranty
12-80 VDC 10.0SW30360°
SWITCHNORMALLY OPEN OR CLOSED
Switches
PART NO. VOLTS WATTS TYPE
High intensity bulb is more than twice as powerful as a conventional back-up bulb.
Increases visibility for both driver and pedestrian when backing up.
90 Day Warranty
12 VDC 50112-00150W
HALOGENBULB
SINGLE CONTACT BAYONET
12 VDC 50112-002 WEDGE
Back-Up Bulbs
76
camera systems
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Prevention PaysThere is overwhelming evidence showing the majority of accidents involving work vehicles (both on and off road) happen while vehicles are backing up. Each year countless incidents result in fatalities, injuries and/or costly damage to vehicles, equipment and property. ECCO’s extensive line of camera systems is designed to offer a solution for every type of vehicle application in order to help prevent expensive accidents, eliminate workplace injuries and ultimately save lives.
Safety & SecurityIn addition to reversing safety, ECCO camera systems have many additional applications including side and/or front vision on large semi trucks and construction equipment, boom vision on access equipment, cranes or large material handling equipment as well as for vehicle security applications including transit bus, school bus and secure transportation.
Premium Quality, Premium PerformanceAll ECCO camera systems are manufactured to the highest quality and performance standards, offer premium features and utilize the latest technology to deliver a reliable, crystal clear image. All systems provide rugged dependability backed by a hassle free 1 Year warranty.
– Sets the StandardOur Gemineye™ line of LCD systems is one of the most durable and fl exible camera offerings available allowing you to choose from a base kit and, if desired, expand it with additional camera and peripheral options. Alternatively you can use our Camera System Specifi er on page 9, choosing individual components to create the perfect system for your application. From compact 3.5” monitors to 7.0” widescreen monitors with multi camera, split-screen viewing capability and mini fl ush mount cameras to full featured automatic shutter cameras, Gemineye™ offers options to suit any need.
Suggested Applications• Refuse Truck• Dump Truck• Beverage Truck• Box Truck• Recovery/Tow Truck• Utility Truck• Semi Truck• Drawbar Truck• Panel Van• Street Sweeper
• Fire Truck• Ambulance• Armored Vehicle• Prison Transporter• Material Handling Equipment• Mobile Crane• Heavy Construction Equipment• Mining & Quarrying Equipment• Forestry & Agricultural Equipment• Landfi ll Equipment
• Fuel Tanker• Liquid Tanker• Vacuum Tanker• Cement Mixer• Snow Plow• Highway Maintenance / DOT• School Bus• Bus• Coach• RV (Motorhome)
77www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
– K35003.5” LCD Color System
(Integral Controller)
camera systems – 3.5"/ 5.0"
C2004
M3500
COLOR 2CAMERA
EXPANDABLE
K5010Basic 5.0” CRT B&W System
(Integral Controller)
2CAMERA
EXPANDABLE
B&W
T60
C101
M5005.0” CRT monitor with volume, brightness, contrast, day/night, mirror imaging control & camera 1 or 2 and camera or AV selection.
Audio/Video input jacks allow VCR/DVD playback.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
18m/60’ transmission cable.
12-24 VDC
Black & white camera with audio (included). Expandable up to 2 cameras (C101 only).
FCC, CE, E
Features
This black & white camera system with 5.0” CRT monitor provides exceptional picture and sound quality in a cost effective package. Kit is expandable up to 2 cameras (C101 only).
3.5” LCD color monitor with built in controller features contrast and brightness control and camera 1 or 2 selection.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Flush mount color camera with aluminum alloy housing (included), expandable up to 2 cameras.
5m/16’ transmission cable (2 camera)
12-24 VDC
E, IP68 (camera)
Features
ECCO’s most compact camera system offers an ideal solution for non commercial and light duty applications where dashboard or cab space is limited. The flat 3.5” LCD color monitor provides a clear, easily viewable image without compromising space and includes a suction cup bracket for temporary window or surface mounting. The high resolution monitor and flush mount camera deliver excellent picture quality. Kit is expand-able up to 2 cameras.
Flush CameraC2004(K3500 only)
Side/Box CameraC2003(K3500 only)
Eyeball CameraC2002(K3500 only)
Basic Camera (B&W)C101(K5010 only)
cameras*
All cameras are color unless otherwise stated.
Additional cables are not required when expanding K5010 & K3500 kits to 2 cameras as the C101 camera includes an additional 18m/60’ cable while the K3500 kit includes a 5m/16’ 2 camera cable.
*
Kit Expansion Options
Standard CameraC2000(K3500 only)
78 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
camera systems – 5.6"
Standard CameraC2000
B&W CameraC1000
Eyeball CameraC2002
Side/Box CameraC2003
cameras
All cameras are color unless otherwise stated.
Flush CameraC2004
COLOR 2CAMERA
EXPANDABLE
TC20C2000
M5600
K5600 –5.6” LCD Color System(Integral Controller)
Kit Expansion Options
5.6” LCD SYSTEMS
5.6” LCD monitors are now the standard in vehicle camera system applications offering compact and unobtrusive mounting inside the operator area while delivering a relatively large, reliable and sharp image in all operating conditions. Systems are available that are expandable up to 4 cameras providing optional side view capability with automatic camera selection for lane changes and manual selection for close quarters maneuvering. 12-24 VDC FCC, CE, E, IP68 (camera)
5.6” LCD color monitor with built in controller features volume, contrast, brightness, day/night, mirror imaging control & camera 1 or 2 selection.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Standard color camera with audio & infrared (included), expandable up to 2 cameras.
20m/65’ transmission cable.
Features
Comprising a feature packed 5.6” LCD high resolution color monitorand standard color infrared camera the K5600 delivers excellent picture quality even in low light conditions. The compact monitor allows for unobtrusive installation without compromising viewable screen area. Kit is expandable up to 2 cameras.
79www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
– K5601
TC20 C1000
M5600
camera systems – 5.6"
cables5m/16’TC05
15m/49’TC15
10m/32’TC10
20m/65’TC20
– K56025.6” LCD B&W System
(Integral Controller)
COLOR 2CAMERA
EXPANDABLE
5.6” LCD monitor with built in controller features volume, contrast, brightness, day/night, mirror imaging control & camera 1 or 2 selection.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Black & white camera with audio & infrared (included), expandable up to 2 cameras (C1000 only).
20m/65’ transmission cable.
Features
With a 5.6” LCD high resolution monitor and black & white infrared camera the K5602 provides a bright, clear picture even in adverse light conditions. The compact monitor allows for unobtrusive installation without compromising viewable screen area. Kit is expandable up to 2 cameras (C1000 only).
COLOR 4CAMERA
EXPANDABLE
TC20
C2000
CB40
M5601
5.6” LCD color monitor features volume, contrast, brightness, day/night, mirror imaging control.
External 4 channel controller allows expansion up to 4 cameras.
Touchpad offers fingertip camera selection.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Standard color camera with audio & infrared (included), expandable up to 4 cameras.
20m/65’ transmission cable.
Features
All the great features of the K5600 with the added functionality of an external controller providing 4 camera capability and touchpad operation. Featuring a 5.6” LCD high resolution, color monitor and standard color infrared camera the K5601 delivers excellent picture quality even in low light conditions. The compact monitor and remote mounted controller allows for unobtrusive installation without compromising viewable screen area or functionality. Kit is expandable up to 4 cameras.
5.6” LCD Color System (External Controller)
80 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
camera systems - 7.0"
Kit Expansion Options
Shutter CameraC2001For use only with K7002, requires TC20-6 (6 Pin Cable)All cameras are color unless otherwise stated.
COLOR 2CAMERA
EXPANDABLE
TC20C2000
M7000
K7000 –7.0” LCD Color System(Integral Controller)
The 7.0” LCD high resolution color monitor included with this kit provides the optimal viewing area for mobile CCTV applications. Excellent picture quality is assured even in low light conditions using ECCO’s standard color infrared cam-era. The flat, widescreen monitor allows unobtrusive mounting with a large, easily viewable screen area. Kit is expandable up to 2 cameras.
7.0” widescreen LCD color monitor with built in controller features volume, contrast, brightness, day/night, mirror imaging control & camera 1 or 2 selection.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Standard color camera with audio & infrared (included). Expandable up to 2 cameras.
20m/65’ transmission cable.
Features
7.0” WIDESCREEN LCD SYSTEMS
7.0” widescreen LCD monitors offer the same benefits as a 5.6” LCD as well as a significantimprovement in viewable area with only a small increase in physical size. The standard for bus and long distance coach applications, a major advantage of a 7.0” monitor is the ability to easily view up to 4 cameras simultaneously using a split screen controller. This is ideal for multi camera applications using 1 rear view, 1 interior view and 2 side view cameras for example. 12-24 VDC FCC, CE, E, IP68 (camera)
Standard CameraC2000
B&W CameraC1000
Eyeball CameraC2002
Side/Box CameraC2003
cameras
Flush CameraC2004
81www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
– K70017.0” LCD Color System
(External Controller)
camera systems – 7.0"
7.0” widescreen LCD color monitor features volume, contrast, brightness, day/night, mirror imaging control.
External 4 channel, split screen controller allows the ability to expand the system and view up to 4 cameras simultaneously or each camera individually.
Touchpad offers fingertip camera selection and split/single camera viewing control.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Standard color camera with audio & infrared (included), expandable up to 4 cameras.
20m/65’ transmission cable.
Features
cables5m/16’TC05
15m/49’TC15
20m/65’ – (6 Pin)TC20-6for use only with C200110m/32’
TC1020m/65’TC20
4CAMERA
EXPANDABLE
COLOR SPLITSCREEN
TC20
C2000
CB40
M7001
TC20
C2000
CB41
M7001
– K70027.0” LCD Color System
(External Split Screen Controller)
The K7002 is ECCO’s most feature packed camera system offering all the features of the K7000 with the added functionality of an external controller providing 4 camera capability, split screen viewing and touchpad operation. Featuring a widescreen 7.0” LCD high resolution, color monitor and standard color infrared camera the K7001 delivers excellent picture quality even in low light conditions. The flat, widescreen monitor and remote mounted split screen controller allows for unobtrusive installation with optimal viewing area and the highest level of functionality. Kit is expandable up to 4 cameras.
COLOR 4CAMERA
EXPANDABLE
7.0” widescreen LCD color monitor features volume, contrast, brightness, day/night, mirror imaging control.
External 4 channel controller allows expansion up to 4 cameras.
Touchpad offers fingertip camera selection.
Automatic camera selection via trigger wire (when reverse gear or relevant control engaged).
Standard color camera with audio & infrared (included), expandable up to 4 cameras.
20m/65’ transmission cable.
Features
All the great features of the K7000 with the added functionality of an external controller providing 4 camera capability and touchpad operation. Featuring a widescreen 7.0” LCD high resolution, color monitor and standard color infrared camera the K7001 delivers excellent picture quality even in low light conditions. The flat, widescreen monitor and remote mounted controller allows for unobtrusive installation with optimal viewing area and functionality. Kit is expandable up to 4 cameras.
82 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
camera systems – components
M500 – Basic 5.0” CRT Black & White Monitor (Integral Controller. Use with C101 only)
• 5.0” CRT monitor with volume, brightness, contrast, day/night, mirror imaging control & camera 1 or 2 and camera or AV selection
• Automatic camera selection via trigger wire (when reverse gear engaged)
• Audio/Video input jacks allow VCR/DVD playback
Screen Size: 5.0” B&WVoltage: 12-24 VDCPower consumption: �12WAudio: YesMirror/normal image switch: YesWeight including stand: 3.3 lbsDimensions: 5.5(H) x 5.7(W) x 7.9(D)Operating temp: +5˚F to +140˚FDay/night sensor: No
M5601 – Gemineye™ 5.6” LCD Color Monitor (Requires External Controller)
• 5.6” LCD color monitor features volume, contrast, brightness, day/night, mirror imaging control
• Requires separate external CB20, CB40 or CB41 (split screen) controller to operate
Screen Size: 5.6” colorVoltage: 12 VDC, with controller (12-24 VDC)Power consumption: �5WAudio: YesMirror/normal image switch: YesWeight including stand: 1.2 lbsDimensions: 5.02(H) x 5.52(W) x 1.09(D)Operating temp: -22˚F to +185˚FDay/night sensor: Yes
M3500 – Gemineye™ 3.5” LCD Color Monitor (Integral Controller. Use with C2004 only)
• 3.5” LCD color monitor with built in controller features contrast and brightness control & camera 1 or 2 selection
• Automatic camera selection via trigger wire (when reverse gear or relevant control engaged)
• Suction mount bracket
Screen Size: 3.5” colorVoltage: 12-24 VDCPower consumption: �7WAudio: NoMirror/normal image switch: NoWeight including stand: .5 lbsDimensions: 3.16(H) x 4.03(W) x .97(D)Operating temp: +32˚F to +140˚FDay/night sensor: No
M7000 – Gemineye™ 7.0” LCD Color Monitor (Integral Controller)
• 7.0” widescreen LCD color monitor with built in controller features volume, contrast, brightness, day/night, mirror imaging control & camera 1 or 2 selection
• Automatic camera selection via trigger wire (when reverse gear or relevant control engaged)
Screen Size: 7” colorVoltage: 12-24 VDCPower consumption: �7WAudio: YesMirror/normal image switch: YesWeight including stand: 1.2 lbsDimensions: 5.13(H) x 7.0(W) x 1.08(D)Operating temp: +14˚F to +140˚FDay/night sensor: Yes
M5600 – Gemineye™ 5.6” LCD Color Monitor (Integral Controller)
• 5.6” LCD color monitor with built in controller features volume, contrast, brightness, day/night, mirror imaging control & camera 1 or 2 selection
• Automatic camera selection via trigger wire (when reverse gear or relevant control engaged)
Screen Size: 5.6” colorVoltage: 12-24 VDCPower consumption: �7WAudio: YesMirror/normal image switch: YesWeight including stand: 1.2 lbsDimensions: 5.02(H) x 5.52(W) x 1.09(D)Operating temp: -22˚F to +185˚FDay/night sensor: Yes
M7001 – Gemineye™ 7.0” LCD Color Monitor (Requires External Controller)
• 7.0” widescreen LCD color monitor features volume, contrast, brightness, day/night, mirror imaging control
• Requires separate external CB20, CB40 or CB41 (split screen) controller to operate
Screen Size: 7” colorVoltage: 12 VDC, with controller (12-24 VDC)Power consumption: �5WAudio: YesMirror/normal image switch: YesWeight including stand: 1.2 lbsDimensions: 5.13(H) x 7.0(W) x 1.08(D)Operating temp: +14˚F to +140˚FDay/night sensor: Yes
83www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
camera systems - components
C2001 – Automatic Shutter - Color Camera• Audio• 18 IR LEDs provide high defi nition
night vision• Light sensor: Auto switches to black
& white image in low light conditions• Automatic shutter: Closes to protect
lens automatically when not in use• Aluminum alloy housing
Resolution (pixels): 500(H) x 582(V)Power consumption: �2.5WMechanical vibration: 8GImage: 1/4” Sony CCDLens angle: 110˚ (diagonal)Weight: 1.3 lbsDimensions: 3.82(H) x 3.94(W) x 2.59(D)Operating temp: -22˚F to +149˚FPlug: 6 pinIP rating: IP68Only for use with CB20 & CB41 Controllers, requires TC20-6 Cable.
C1000 – Standard Black & White Camera• Audio• 18 IR LEDs provide high defi nition
night vision• Aluminum alloy housing
Resolution (pixels): CCIR:500(H) x 582(V), EIA:510(H) x 492(V)Power consumption: �2WMechanical vibration: 8GImage: 1/4” B&WLens angle: 110˚ (diagonal)Weight: .9 lbsDimensions: 3.19(H) x 3.15 (W) x 2.41(D)Operating temp: -22˚F to +149˚FPlug: 4 pinIP rating: IP68
C2000 – Standard Color Camera• Audio• 18 IR LEDs provide high defi nition
night vision• Light Sensor: Auto switches to black
& white image in low light conditions• Aluminum alloy housing
Resolution (pixels): 500(H) x 582(V)Power consumption: �2WMechanical vibration: 8GImage: 1/4” Sony CCDLens angle: 110˚ (diagonal)Weight: .9 lbsDimensions: 3.19(H) x 3.15 (W) x 2.41(D)Operating temp: -22˚F to +149˚FPlug: 4 pinIP rating: IP68
C101 – Basic Black & White Camera (use with M500 only)
• Audio• Includes 18m/60’ transmission cable
Resolution (pixels): CCIR:512(H) x 582(V), EIA:512(H) x 492(V)Power consumption: �1.5WMechanical vibration: 10GImage: 1/3” B&WLens angle: 120˚ (diagonal)Weight: .9 lbsDimensions: 1.73(H) x 2.75(W) x 2.24(D)Operating temp: -4˚F to +122˚FPlug: 6 pinIP rating: None
C2002 – Eyeball – Color Camera• Audio• 9 IR LEDs provide high defi nition
night vision• Light Sensor: Auto switches to black
& white image in low light conditions• Eyeball design maximizes angle
adjustment capability• Aluminum alloy camera housing
Resolution (pixels): 500(H) x 582(V)Power consumption: �1.5WMechanical vibration: 8GImage: 1/4” Sony CCDLens angle: 110˚ (diagonal)Weight: .7 lbsDimensions: 2.47(H) x 3.03(W) x 1.99(D)Operating temp: -22˚F to +149˚FPlug: 4 pinIP rating: IP68
C2004 – Flush – Color Camera• Flush mounts in bodywork/
bumper• Aluminum alloy housing
Resolution (pixels): 500(H) x 582(V)Power consumption: �1.2WMechanical vibration: 8GImage: 1/4” Sony CCDLens angle: 150˚Weight: .3 lbs
Dimensions: Flange Dia. - 1.22 Body Dia. - 1.06 Length - 1.83Operating temp: -22˚F to +149˚FPlug: 4 pinIP rating: IP68
C2003 – Side/Box – Color Camera• 9 IR LEDs provide high defi nition
night vision• Light Sensor: Auto switches to black
& white image in low light conditions• Aluminum alloy camera housing
Resolution (pixels): 500(H) x 582(V)Power consumption: �1.5WMechanical vibration: 8GImage: 1/4” Sony CCDLens angle: 110˚ (diagonal)Weight: .6 lbsDimensions: 2.55(H) x 2.44(W) x 3.72(D)Operating temp: -22˚F to +149˚FPlug: 4 pinIP rating: IP68
84 www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Gemineye™ Camera Transmission Cables
TC05 5m/16’ (4 pin)
TC10 10m/32’ (4 pin)
TC15 15m/49’ (4 pin)
TC20 20m/65’ (4 pin)
TC20-6 20m/65’ (6 pin)
TC-TT20 Tractor to trailer socket connector (7pin trailer - 4 pin camera). monitor to curly = 5m/16’ curly = 0.6m/2’ - 2.4m/8’ curly to camera = 20m/65’
Gemineye™ DVR to Camera Cables
TC-CDVR10 10m/32’ (4 pin)
TC-CDVR15 15m/49’ (4 pin)
TC-CDVR20 20m/65’ (4 pin)
Gemineye™ DVR to Monitor Cables
TC-MDVR10 10m/32’ (4 pin)
TC-MDVR15 15m/49’ (4 pin)
TC-MDVR20 20m/65’ (4 pin)
Basic CRT Camera Transmission Cables
T25 7.5m/25’ (6 pin)
T60 18m/60’ (6 pin)
camera systems – components
ADPT-05 Monitor replacement adapter for legacy camera systems using M525 monitor (discontinued).(Female 16 / Male 13)
ADPT-07 – S-video to VHS (S = Male 4 / VHS = Female 4)
ADPT-08 – S-video to VHS (S = Female 4 / VHS = Male 4)
ADPT-464-6 pin adapter (Female 4 / Male 6)
ADPT-646-4 pin adapter (Female 6 / Male 4)
ADPT-DVR01Controller to camera & DVR "Y" cable (4 pin)
ADPT-DVR02Controller to camera & DVR "Y" cable (6 pin)
ADPT-RCA01DVR to Controller (CB20) adapter (s-video / RCA in)
ADPT-RCA02DVR to Controller (CB20) adapter (VHS / RCA out)
cables
CB41 – 4 Camera Split Screen Controller• Allows input of up to 4 cameras• Allows split screen viewing of all cameras
simultaneously or single cameras individually • Automatic switching to rear view when
reverse gear engaged• Audio/video out jacks• Includes touchpad camera selection control
including quad/single view selection
Max cameras: 4Power supply: 12-24 VDCPower consumption: 18WDimensions: 1.32(H) x 6.10(W) x 3.51(D)Weight: 1.0 lbsPlug: 6 pin (includes ADPT-46 adapters
required for use with 4 pin cameras)
digital video
DVR011 Channel Digital Video RecorderOrder memory separately.
Power supply: 12-24 VDCPower consumption: <42W*Storage capacity: 80GB, 160GB, 250GB
Compression format: MPEG 2 DVDDimensions: 4.45(H) x 11.04(W) 11.18(D)Weight: 13 lbs (excluding memory disk)Operating temp: +41˚F to +122˚F Humidity: <90%Mechanical vibration: 5G*Requires Digital Video Memory disks (sold separately)
DVR044 Channel Digital Video RecorderOrder memory separately.
Power supply: 12-24 VDCPower consumption: <42W*Storage capacity: 80GB, 160GB, 250GB
Compression format: MPEG 2 DVDDimensions: 4.45(H) x 11.04(W) 11.18(D)Weight: 13 lbs (excluding memory disk)Operating temp: +41˚F to +122˚F Humidity: <90%Mechanical vibration: 5G*Requires Digital Video Memory disks (sold separately)
Digital Video MemoryDigital memory disks for use with DVR01 or DVR04 digital video recorders
DVM80 80GB
DVM160 160GB
DVM250 250GB
mounting brackets
MB01
Permanent Monitor MountUse with 5.6” and 7.0” monitors
MB02
Suction Cup Monitor MountUse with 3.5” monitors
cable adapters
CB40 – 4 Camera Controller• Allows input of up to 4 cameras• Automatic switching to rear view when
reverse gear engaged• Audio/video out jacks• Includes touchpad camera
selection control
Max cameras: 4Power supply: 12-24 VDCPower consumption: 9WDimensions: 1.31(H) x 6.16(W) x 2.96(D)Weight: .8 lbsPlug: 4 pin (not for use with C2001 shutter camera)
CB20 – 2 Camera Controller• Allows input of up to 2 cameras• Automatic switching to rear view when
reverse gear engaged• Audio/video in and out jacks allow
DVR/VCR connection• Includes touchpad camera selection control
Max cameras: 2Power supply: 12-24 VDCPower consumption: 9WDimensions: 1.31(H) x 6.16(W) x 2.96(D)Weight: .8 lbsPlug: 6 pin (requires ADPT-46 adapters for use with 4 pin cameras (order separately))
controllers
DVRCOMPATIBLE
85www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
camera systems – specifier
choose digital video recorder/memory
DVR01 (1 channel DVR)DVR04 (4 channel DVR)
DVM80 - 80GBDVM160 - 160GBDVM250 - 250GB
DVR01 (1 channel DVR)DVR04 (4 channel DVR)
DVM80 - 80GBDVM160 - 160GBDVM250 - 250GB
M3500M500 M5601 M7000 M7001M5600
choose a monitor
1
NANA NA NA
5
C2004C101 C1000
C2000
C2002 C2002
C2003 C2003
C2004 C2004
C1000
C2000
C2001
C2002
C2003
C2004
C1000
C2000
C1000
C2000
C2001
C2002
C2003
C2004
max 2max 2 max 2 max 4 max 2 max 4
* *
choose camera(s)
2
*C2001 Automatic Shutter Camera uses a 6 pin transmission cable. This camera is only for use with M5601 or M7001 Monitors in conjunction with a CB20 or CB41 (6 pin) Controller. A TC20-6 (6 Pin Cable) is also required for the shutter camera to operate correctly.
choose a controller
CB40 CB40
CB20 CB20
CB41 CB41
NANA NA NA
4 camera controller(4 pin)
4 camera controller(4 pin)
2 camera controller(6 pin) Use with DVR.
2 camera controller(6 pin) Use with DVR.
4 camera split screen controller (6 pin)
4 camera split screen controller (6 pin)
***
***
***
***
3
CB20 & CB41 Controllers feature 6 pin connections to allow functionality of C2001 Automatic Shutter Camera. ADPT-46 4-6 Pin Adapters are required for the connection of 4 pin cameras (supplied with CB41, order separately when using CB20). CB40 Controller features 4 pin connections and is not for use with C2001 Automatic Shutter Camera.
** C2004 requires ADPT08 adapter to operate with all monitors except M3500.
NA max 2 max 4 max 2 max 4
TC05TC10TC15
(C101 cameras supplied with T60 cable)
(M3500 supplied with 5m/16’ 2 camera cable)
TC05TC10TC15
TC05TC10TC15
TC05TC10TC15
TC20 TC-TT20
TC20 TC20-6TC-TT20
TC20 TC-TT20
TC20 TC20-6TC-TT20
choose cable(s)
4
****
***
**** ****
TC20-6 6 Pin Cable required for operation of C2001 Automatic Shutter Camera
NA
**
**
**
**
86
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Beacon Lenses
DESCRIPTION
Safety Director Lenses
PART NO.
R3000LX Solid (amber, blue, red)
R3000LAA Directional Arrow (amber only)
3000, 3200 Series
DOME
AMBER BLUE CLEAR RED
R7960LA R7960LB R7960LC R7960LR
7900 Series - Pulse®
GREENBLUE REDCLEARPROFILE AMBER
MEDIUM /HIGH
LOW R6050LA R6050LB
R6070LA R6070LB
R6050LC
R6070LC
R6050LG
R6070LG
R6050LR
R6070LR
LENS
REDTYPE
GREEN
GREEN
BLUE
BLUE
RED
RED
CLEAR
CLEAR
R6400LA
R7160LA
R6400LB
R7160LB
R6400LC
R7160LC
R6400LG
R7160LG
R6400LR
R7160LR
AMBER
AMBER
6900 / 6700 / 6600 / 6500 / 6500 J-Bolt Series
6400 Series
7100 Series - Reflex™
GREENBLUE REDCLEARAMBER
R6220LA R6220LB R6220LC R6220LG R6220LR
6200 / 6260 Series
6000 Series
R6010LC R6050LA
5800 Series
R5810LB
R5840LB
R5810LA
R5840LA
R5810LR
R5840LR
LOW PROFILE
HIGH PROFILE
BLUEAMBER
5700 Series
R5700LA R5700LRR5700LB R5700LGR5700LC
GREENBLUE REDCLEARAMBER
87
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
ENDTYPE CENTER
Minibar Domes / Lenses
R159-901XUpper Dome R109-906X
R309-902CLower Dome R209-907C
Replace X in part number with desired color:A = amber, B = blue, C = clear, R = red
TYPE BLUE REDCLEAR
R5150LB
AMBER
R5150LA R5150LC R5150LRLens
R5101LBR5101LA R5101LC R5101LRDome
15 Series - 23" - Streetlazer™
60 Series - 22" - Evolution®
70 Series - 22"
R6050LBR6050LA R6050LC R6050LRLens
R5400LBR5400LA R5400LC R5400LRDome
A5000FAFilter
R5150LBR5150LA R5150LC R5150LRLens
R5100LBR5100LA R5100LC R5100LRDome
5135 / 5150 Series - 15" - Blaze II®
R5300LA R5300LB R5300LC R5300LRDome
A5000FBA5000FA - A5000FRFilter
5315 / 5350 Series - 15"TYPE BLUE REDCLEARAMBER
R6050LBR6050LA R6050LC R6050LRLens
GREEN
R6050LG
A5000FB - A5000FR
-
-
UPPERCENTER
UPPER END
88
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. LENTGTH
Lightbar Domes
R209-902C R109-904X R209-905C R109-906X R209-907C
MID / CENTERLONG (15.4”/ 390mm)SHORT (10.2”/ 260mm)
UPPERUPPER LOWER UPPER LOWER
ENDLENGTH
ALL MODELS
10.4”/264mmR5105LX R5104LX 8.8”/224mm R5102LX 12.9”/327mm
R5103LX - - R5102LX 12.9”/327mm
12”/305mmR5108LX R5107LX 6”/154mm R5104LX 8.8”/224mm17.4”/441mmR5110LX - -
20.3”/517mmR5111LX R5107LX 6”/154mm R5102LX 12.9”/327mm14.2”/361mmR5114LX - - R5109LX 18.9”/479mm
11”/280mmR5115LX - - - -
20.3”/517mmR5111LX R5107LX 6”/154mm R5106LX 11.3”/288mm17.9”/455mmR5112LX - - R5109LX 18.9”/479mm
36”/0.91m
48”/1.2m
54”/1.37m
60”/1.5m
11.4”/290mm
END END
END ENDCENTER
CENTER
Dome Key
MID MID
15 Series - Streetlazer™
R309-902CR159-901X R109-904X R209-905C R109-906X R209-907CALL MODELS
20 Series
R209-902CR209-901X R209-904X R209-905C R209-906X R209-907CALL MODELS
30 Series
R309-902CR309-901X R209-904X R209-905C R209-906X R209-907CALL MODELS
MID / CENTERCENTERMID
PART NO.PART NO. LENGTH PART NO. LENGTH
ENDLENGTH
LOWER
LENGTH
10 Series
R109-901C
- -
Replace X in part number with desired color: A = amber, B = blue, C = clear, G = green, R = red (where applicable)
A5003RMK
Lightbar Mounting HardwarePART NO. USED WITHDESCRIPTION
HOOK-ON ROOF MOUNTSFord truck 1/2T, 04-05Dodge truck 1/2-1T, 02-05GM truck 1/2-1T, 99-05Ford truck 3/4-1T, 99-05Ford Crown Vic, 98-05Ford truck 1/2T, Crew Cab 97Ford truck 1/2T, 04-05Dodge truck 1/2-1T, 02-05GM truck 1/2-1T, 99-05
10 / 20 Series10 / 20 Series
10 / 20 Series10 / 20 Series10 / 20 Series15 / 30 Series15 / 30 Series
A1010RMKA1011RMK
A1012RMKA1013RMKA1014RMKA1016RMKA1017RMK
60 Series - Evolution®
CENTERPART NO.PART NO. LENGTH
ENDLENGTH
LENGTH
17.8”/452mmR5203LX - -R5201LX R5200LX 11.7”/297mm
17.8”/452mmR5203LX R5200LX 11.7”/297mm
36”/0.91m
48”/1.2m
11.8”/300mm
70 Series
PART NO. USED WITHDESCRIPTION
15 / 30 Series15 / 30 Series15 / 30 Series60 / 70 Series60 / 70 Series, 48”- 60”60 / 70 Series, 48”- 60”15 / 30 Series
A1018RMKA1019RMKA1020RMKA5001RMKA5002RMK
A5003RMK
A5005RMK
HOOK-ON ROOF MOUNTSFord truck 3/4-1T, 99-05Ford Crown Vic, 98-05Ford Truck,1/2T Crew Cab, 97Rubber Feet KitUniversal Gutterless
Universal Gutter
Rubber Feet Kit
89
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Mounting HardwarePART NO. USED WITHDESCRIPTION
MOUNTING BRACKETS / KITSUniversal BracketDeck Mount BracketLicence Plate BracketTrunk Mount BracketAdhesive Window BracketJ-Bolt Installation KitUniversal Installation KitSelf-Leveling Bracket
1” Pipe Mirror BracketMirror Bracket Adapter PlateUniversal Mounting BracketWindshield Mount KitUniversal Mounting BracketWindshield Mount KitSuction Cup
MAGNET MOUNT KITSMagnet Mount KitVacuum-Magnet Mount Kit2 3/8" MagnetMagnet Mount KitVacuum-magnet Mount KitMagnet Mount Kit
Magnet Mount Pan BottomVacuum-magnet Mount KitVibration Damping Mount Kit
Pipe Mount Flange: 1” Pipe 3/4” Pipe (Pan bottom not included)Magnet CoverMagnet Mount KitVacuum-magnet Mount Kit3" Magnet
DIN POLE MOUNTST BracketL Bracket
GASKETS Rubber Base GasketLens Flange RingAdhesive GasketSurface Mount GasketSurface Mount GasketSurface Mount Gasket
MOUNTING GROMMETSRoundOval Grommet Adapter
GROMMET MOUNTING BOXESRoundOval
3730 Series3730 Series3730 Series3730 Series3730 Series6520, 6524, 6530 & 6534All beacon models 9050, 9070, 2350, 2500, 2600 Series2550, 2570, 9050, 9070, 2600, 5700, 6500, 6600, 6700 & 6900 Series6500 Series6200, 6400 Series (use with A6400MB)3600 Series (Single Head)3600 Series (Single Head)3600 Series (Twin Head)3600 Series (Twin Head)3600 Series (Single/Twin Head)
5315-MG5135, 5150, 5315 & 5350 Series5315-MG5700 Series5700 Series2550, 2570, 2650, 2655, 2670, 2675, 9050, 9070, 6200, 6400, 6500, 6600 & 6900 Series6520, 6524, 6530 & 65346500, 6600 & 6900 Series2500, 2600, 2350, 9050, 9070, 5700, 6400, 6500, 6600, 6700, 6900 Series
6520, 6524, 6530, 65346520, 6524, 6530, 6534
A6600MK7400, 7600 Series7400, 7600 SeriesA6600MK
5810, 5815, 58505810, 5815, 5850
6520, 6524, 6530 & 65346520, 6524, 6530 & 6534A6600MK3710 Series3730 Series3800 Series
A9894, 2140A9894, 2110, 2160, 3860 & 90073800 / 2100 Series
21402110, 2160, 3760, 3860 & 9006
A3730BKTA3730DCKA3730LICA3730TNKA3730WINA6520HWA6600INSA6600SLB
A6400MBA6400MBPA3610UMKA3615SMKA3630UMKA3635SMKR3600SC
A5300MKA5300VMK
R5300MA5700MK
A5700VMKA6600MK
A6520MGA6000VMKA6600VDK
A6522PFA6523PF
A6600MCA7660MK
A7660VMKR6600M
A5850TBA5850LB
R6520GAR6520FRR6600AR3700GR3730GR3800G
R2140GRR2160GO
A3860ADPT
A9894A9895
A6600SLB
A6400MBP
A6400MB
A5850LBA5850TB
R2140GR R2160GO
A9894 A9895
A6600VDK
A6600MK
A6522PF
90
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. USED WITHDESCRIPTION
Belts, Reflectors & Filters
Rotator filter (A, B, R) Rotator belt (round) Rotator belt (twin curve flat) Rotator reflector Rotator reflector Rotator belt (round) Rotator belt (twin curve flat)
R5015MGA, 5315, 70 Series rotatorsR5100RA, R6003RA, 5135, 60 Series rotators R5100RA, R6003RA, 5135, 60 Series rotators R5100RA, R6003RA, 5135, 60 Series rotatorsR5015MGA, R5025MGA, 5315, 70 Series rotatorsR5800RA, 5800 Series R5800RA, 5800 Series
A5000FXR5100BR5010BR5100RFR5300RFR5800BR5801B
PART NO. USED WITHDESCRIPTION
Bulbs / Tubes / LED Modules
BULBS Halogen 12V H1 Halogen 12V H3 Halogen 12V Bayonet Halogen 24V Bayonet Halogen 12V Bayonet Incandescent 12V Incandescent 24V FLASHTUBES Helical (360° strobes)
Linear (360° industrial strobe) 'U' (360° industrial strobe) Linear (360° industrial strobe) Helical (directional strobes) Linear LED MODULES Front/Rear module w/pigtail (A, B, C, R) Corner module w/pigtail (A, B, C, R) Front/Rear module (A, B, C, R) Corner module (A, B, C, R) Corner cluster (A, B, C, R) Dir module (A, B, C, R) 12V Dir module (A, B, C, R) 24V
5135, 5800, 60 Series rotators, Cleversectors™
Halogen lamp - R209-917, Worklamp - R6002WL 5315, 5715, 20 / 30 / 70 Series rotators / 60 Series directional halogens5315, 5725, 20 / 30 / 70 Series rotators3015H, 3035H, 3055H3015, 3035, 3055, 63203215, 3235, 3255
5150, 5350, 6000, 6500, 6600, 6700, 6900, 60 / 70 Series 360° strobes6220, 6225, 62266410641160 Series directional strobes30 Series linear strobes
10 / 15 / 30 Series
10 / 15 Series
10 / 15 / 30 Series10 / 15 Series10 Series3300 Series3400 Series
R5812BHR0002BHR5012BH
R5024BHR3000BHR3000BIR3200BI
R6501FT
R6200FTR6410FTR6411FTR9000FTR899-914
A109-924X
A159-938X
R109-924XR159-938XR109-938X
R3300XR3400X
R5812BH
R6501FT
R6411FTR6410FT
R109-924XR109-938X
PART NO. USED WITHDESCRIPTION
R209-917
R209-913
Lamp Assemblies
Motor gear rotator 12V Motor gear rotator 24V Belt drive rotator 12V Belt drive rotator 12V Belt drive rotator 12V Motor gear rotator 12V 90RPM Motor gear rotator 12V 150RPM Halogen Dir/Alley lamp (clear) Halogen lamp lens (A, B, R) Cleversector™ left 12V Cleversector™ right 12V STT Lamp Worklamp
R5015MGAR5025MGAR5100RAR5800RAR6003RAR209-909R209-908R209-917
R209-918XR209-912R209-913R6004STTR6002WL
R209-908
R6003RA
5315, 5715, 70 Series572551355800 Series60 Series20 / 30 Series20 / 30 Series10 / 15 / 20 / 30 Series10 / 15 / 20 / 30 Series halogen lamp - R209-91710 / 20 Series10 / 20 Series30 / 60 Series30 / 60 Series
91
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
Low ProfileMedium ProfileHigh Profile
Low Profile - J-BoltMedium Profile - J-Bolt
USED WITH
USED WITH
USED WITH
10 / 15 Series10 / 20 / 30 Series10 Series15 Series30 Series10 / 15 / 20 / 30 Series60 / 70 Series70 Series70 Series60 Series60 Series
PART NO. USED WITHDESCRIPTION
6400 Series6500, 6600, 6700, 6900, 7900 Series6400 Series2550, 2570, 2650, 2670, 9050, 9070, 2600 Series
PART NO. DESCRIPTION
PART NO. DESCRIPTION
Cables, Plugs & Connectors
5135-VM5150-VM5186-VM & 5188-VM5315-MG & 5315-VM5350-VM, 5715 & 5725A6600MK, 6410MG, 6500, 6600, 6900 & 7900 Series3000, 3300, 3400 Series3000, 3300, 3400 Series (12V & 24V LED)3200 Series3015, 3215, 3215H3035, 3235, 3235H30553315, 34153335, 34353355, 34559200, 9400 Series20002140, 21609200, 9400 Series
R5135CPR5150CPR5180CPR5300CPR5700CPR6600CP
R3000FBKR3012FPAR3024FPAR3015WAR3035WAR3055WAR3315WAR3335WAR3355WAR9000PCHR2000WHR2102PA
A9000AMP
Branch Guards
6550, 6650, 6750, 6950, 2550, 2650, 2655 & 90506570, 6670, 6770, 6970,2570, 2670, 2675 & 90706690, 6990 & 79606200 Series6400 Series6520 & 65246530 & 6534
A6050BGA6070BGA6090BGA6220BGA6400BGA6520BGA6530BG
PART NO. DESCRIPTION
Dust Covers
Low Profile
Medium Profile
6550, 6650, 6750, 6950, 2550, 2650, 2655 & 90506570, 6670, 6690, 6770, 6970, 6990, 2570, 2670, 2675, 2690, 2695 & 9070
A6050DC
A6070DC
Dome Screws / Clips
Lens retaining clip smallLens retaining clip largeLens retaining screwLens retaining screwLens retaining screwLens joining clipEnd capBaffle-amberBaffle-clearBaffle-amberBaffle-clear
R109-927R209-927R109-942R159-942R309-942R209-921
R0004R0005R0006R0007R0008
Lens Covers
Half Lens CoverHalf Lens CoverBlack TopBlack Top
A6400HCA6600HTA6400BTA6501BT
R209-921R109-927
17’ Cigarette cord & plug15’ Cigarette cord & plug15’ Cigarette cord & plug w/switch17’ Cigarette cord & plug17’ Cigarette cord & plug15’ Cigarette cord & plug12V Fuse plug assembly with bracket12V Fuse plug assembly24V Fuse plug assembly 15’ Director wire assembly35’ Director wire assembly55’ Director wire assembly15’ LED Director wire assembly35’ LED Director wire assembly35’ LED Director wire assemblyPower control harnessWire harness2 wire plugAMP superseal + pins
PART NO. USED WITHDESCRIPTION
A9000AMP
A6050BG
92
accessories & replacement parts
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
PART NO. USED WITHDESCRIPTION
PART NO. USED WITHDESCRIPTION
Switches & Control Boxes
Switchbox - 6 switch 12V Illuminated 12VIlluminated 12V-Amber-SPSTIlluminated 12V-Amber-DPDTBracket - end section Bracket - center sectionBracket mounting kitSwitch panel - single slot Director ControllerLED Director Controller
A9901A9901A9901 / A9902 / A9903 A9891 / A98923000, 3200 Series3300, 3400 Series
A9000A9901A9891A9892A9902A9903A9904A9893
R3000CBR3300CB
A9000
A9891 & A9893 Depicted
Signal Bars
With 15’ cable, Incandescent 12VWith 15’ cable, Incandescent 24VWith 15’ cable, Halogen 12VWith 15’ cable, LED 12VWith 15’ cable, LED 24VWith 35’ cable, Incandescent 12VWith 35’ cable, Incandescent 24VWith 35’ cable, Halogen 12VWith 35’ cable, LED 12VWith 35’ cable, LED 24VWith 55’ cable, Incandescent 12VWith 55’ cable, Halogen 12VWith 55’ cable, LED 12VWith 55’ cable, LED 24VEnd Cap
Model 3015Model 3215Model 3015HModel 3315Model 3415Model 3235Model 3235Model 3035HModel 3335Model 3435Model 3055Model 3055HModel 3355Model 34553000, 3200 Series
R3015LBR3215LB
R3015HLBR3315LBR3415LBR3235LBR3035LB
R3035HLBR3335LBR3435LBR3055LB
R3055HLBR3355LBR3455LBR3000EC
R3000CB
R3315LB
R3015LB
93
p.o.p. displays
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
CP505
CP510
CP520
CP530
CP580
CP585
CP950
CP951
OTHER ITEMSLIGHT BRACKETSALARM BRACKETS SPOOLS
POP-GON-KIT11-crimp tool1- assorted terminals
1-red wire1-black wire
3-with off-on switches1-with cigarette lighter socket
1-with off-on switch1-with momentary on-off switch
POP-GON-KIT21-crimp tool1- assorted terminals
1-red wire1-black wire
4-with off-on switches1-no switch1-with cigarette lighter socket
2-with off-on switch2-with momentary on-off switch
POP-GON-KIT31-crimp tool1- assorted terminals
1-red wire1-black wire
6-with off-on switches2-no switch2-with cigarette lighter socket
2-with off-on switch2-with momentary on-off switch
POP-GON-KIT2 Depicted
Allows mounting of 3700/3800 Series LED’s on alarm brackets supplied with gondola kitsPOP-LED-KIT
EC20
Gondolas, display merchandise and power supply (EC20) not included with kits.
Countertop DisplaysPART NO. DISPLAY INCLUDES
12 505 87 dB(A) 12-24V Back-Up Alarms
12 510 97 dB(A) 12V Back-Up Alarms
12 520 97 dB(A) 12-24V Back-Up Alarms
12 530 102 dB(A) 12-24V Back-Up Alarms
12 580 87 dB(A) 12-80V Back-Up Alarms
12 585 97 dB(A) 12-48V Back-Up Alarms
12 SA950 82-102 dB(A) 12-24V Smart Alarms
12 SA951 77-97 dB(A) 12-48V Smart Alarms
Gondola Display KitsPART NO.
DISPLAY INCLUDESRECOMMENDED PRODUCTS
PART NO. DESCRIPTION
510SA9015813A-MG
6770A5135A-VM
510530SA9013810A
5813A-MG6570A6770A6650A
5135A-VM
510530SA9013810A
5813A-MG6570A6650A6770A
5135A-VM5150CAA
Display without product
POP-1 Depicted(supplied without product)
POP-1
QTY
Converter 110 VAC to 12 VDC
CP510 Depicted
94
technical specifications guide
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
6.5"
ECCO’s diverse line of beacons offers a wide range of base types and mounting options to suit a variety of applications. Choose from bolted, pipe, J-Bolt, toggle bolt, pole and magnetic versions, aluminum or plastic bases. In addition our convenient mirror bracket offers a fast permanent mounting with no holes required. (6200 / 6400 / 6500 & 7400 Series only)
A6400MBPA6400MB
PART NO. USED WITHDESCRIPTION
1” Pipe Mirror BracketMirror Bracket Adapter Plate
6500, 7400 Series6200, 6400 Series (use with A6400MB)
A6400MBA6400MBP
6500, 6600, 6700, 6900, 7100, 7400, 7600, 7900 Series
6500 J-Bolt
6400 / 6460
6200 / 6260
1 Bolt - Steel Base1 x 9/16" hole required (plus 3rd wiring hole)Secure with 1/2" hardware
1 Bolt - Rubber Base1 x 9/16" hole required Secure with 1/2" hardware
3 Bolt3 x 5/16" (plus 4th wiring hole)Secure with 1/4" hardware
Pole FixingDIN#72591 accepts T or L fixing bracket
6000 Series
5800 Series
5700 Series
2 Bolt - 2 x 7/32" holes required (plus 3rd wiring hole) Secure with #8 hardware, Pipe - 1/2" NPT thread
3 Bolt - 3 x 3/16" holes required (optional 4th wiring hole) Secure with #10 hardware
J Bolt - 2 x 5/16" holes required (plus 3rd wiring hole) Secure with J-Bolts. Accessories available for 1" & 3/4" NPT pipe mount, magnet or flush mount.
3 Bolt - 3 x 7/32" holes required (optional 4th wiring hole) Secure with #8 hardware, Pipe - 1" NPT thread
Toggle Bolt 2 x 3/4" holes required (plus 3rd wiring hole) Secure with toggle bolts
3 Bolt3 x 7/32" holes required (plus 4th wiring hole) #8 hardware, Pipe - 1" NPT thread
BEACON BULB / TUBE GUIDE
DO NOT FIT BEACON TO ANY ICE COVERED SURFACE· Always attach to clean, dry, smooth, non-porous, ferrous surface
· Check beacon is secure BEFORE driving vehicle
· Use tabs to release vacuum
BULB / TUBE HANDLINGNEVER hold bulb or tube by the glass
BEACON MOUNTINGAlways mount beacons to the vehicle so the base is parallel to the ground as shown.
R5812BHR6501FT R6200FTR6410FTR5012BHR5024BH
12V24V
MAGNETIC MOUNTS
6900 / 6700 / 6600 / 6500, 6500 J-Bolt / 6000 Series
6410 6200 Series 5800 Series 5700 Series
1/2"
ø 9/16"
J-Bolt
ø 5/16"
1/2"
ø 9/16"
1/4"
ø 5/16"
DIN#72591
6.5"
5.1"
toggle
ø 3/4"
#8
ø 7/32"1" Pipe mount
#10
ø 3/16"
#8
ø 7/32"1" Pipe mount
ø 1/2"
#8
ø 7/32"
5.1"5.7"
BEACON MOUNTING GUIDE
SglPRODUCT PG# SAE VDC Amps WattsJoules
Dbl Tpl Quad SglFlashes Per Min
Dbl Tpl QuadDimensions
(Dia X H) MountingBase
MaterialWar-ranty
71607460766079407960
6260/62666460
345761614
111213-
12-2412-3612-2412-2412-2412-8012-80
3.21.01.71.53.70.20.3
-------
-------
-------
-------
----
-656580
6.5 x 3.96.4 x 3.16.3 x 6.26.5 x 5.56.5 x 5.53.4 x 5.55.1 x 3.8
3 Bolt/1" Pipe/Vac Mag
3 Bolt/1" Pipe/Vac Mag
3 Bolt/1" Pipe/Vac Mag
3 Bolt/1" Pipe/Vac Mag
3 Bolt/1" Pipe/Vac Mag
2 bolt / 1/2" Pipe
3 Bolt/Magnet
-------
120---
-8080-
5 yrs5 yrs5 yrs5 yrs5 yrs5 yrs5 yrs
AluminumNylon
AluminumAluminumAluminum
NylonNylon
BEACONS - LED
Beacons
Varies80 Flicker
45 Flicker / 120 Rotate
95
technical specifications guide
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
SglPRODUCT PG# SAE VDC Amps WattsJoules
Dbl Tpl Quad SglFlashes Per Min
Dbl Tpl QuadDimensions
(Dia X H) MountingBase
Material6900 Smart
6900 Double/Quad6710/67206750/67006600 Smart
6600 Double/Quad6500 Series
6520/6530 (J-Bolt)6524/6534 (J-Bolt)
6400/64106200
6225/62266000 Smart
6000 Double/Quad
5800 Series
5700 Series
89101011111213131517171818
20/21
19
1-212222222---22
1
1
12-2412-2412-4812-2412-2412-2412-4812-4812-4812-8012-8012-8012-2412-24
12
12 or 24
2.92.91.52.52.12.11.51.51.50.30.30.52.12.1
5.2
2.0/4.4
3535182325251812153.54.06.52525
65
50
-------5-
1.51.52--
-
-
10-15157
108-138or13
77----
8-138or13
-
-
--------8-----
-
-
--------
65-----
-
-
65656565606065-
65---
6060
-
-
6.5 x 4.8, 6.7or 7.96.5 x 4.8, 6.7or 7.9
6.5 x 4.8 or 6.76.5 x 4.8 or 6.7
6.5 x 4.8,6.7 or 7.96.5 x 4.8,6.7 or 7.9
6.5 x 4.8 or 6.76.5 x 5.5 or 7.46.5 x 5.5 or 7.4
5.1 x 3.83.4 x 5.53.4 x 5.58.6 x 7.58.6 x 7.5
6.0 x 5.7 or 7.0
7.6 x 6.9
3 Bolt / 1" Pipe
3 Bolt/1" Pipe/Mag/Vac Mag
3 Bolt / 1" Pipe
3 Bolt / 1" Pipe
3 Bolt / 1" Pipe
3 Bolt/1" Pipe/Magnet
3 Bolt/1" Pipe/Mag/Vac Mag
J-Bolt /Flush/Mag/3/4"& 1"Pipe
J-Bolt /Flush/Mag/3/4"& 1"Pipe
3 Bolt/Magnet
2 Bolt
2 Bolt / 1/2" Pipe
2 Bolt (Toggle)
2 Bolt (Toggle)
3 Bolt/1 Bolt/1 BoltFlexi/Pole/Flexi
Pole/Magnet/Vac Magnet
3 Bolt/1" Pipe/Vac Magnet
16-20201016
12-1712or17
10-
10---
12-1712or17
-
-
-------
80-
708585---
160
100
8080808065658080----
6565
-
-
2 yrs2 yrs2 yrs2 yrs2 yrs2 yrs2 yrs2 yrs2 yrs
6mo/2yrs
5 yrs5 yrs2 yrs2 yrs
2 yrs
2 yrs
War-ranty
BEACONS - ROTATOR
Beacons (continued)
AluminumAluminum
NylonAluminumAluminumAluminum
NylonAluminumAluminum
NylonNylonNylon
AluminumAluminum
Polycarbonate
Nylon
15-0001115-0001315-0001515-00019
518651885280
60 Series 22" Strobe70 Series 22" Strobe
5150 Series5350 Series
60 Series 22" Rotator70 Series 22" Rotator
5135 Series5315 Series
PermanentPermanentPermanentPermanent
Permanent / Vacuum MagnetPermanent / Vacuum Magnet
Permanent
PermanentPermanent
Permanent / Vacuum MagnetPermanent / Vacuum Magnet
PermanentPermanent
Permanent / Vacuum MagnetPermanent / Magnet/
Vacuum Magnet
PRODUCT PG# SAE VDC Amps WattsJoules
Dbl QuadFPM Per Module/Total
Dbl QuadDimensions
(L x W x H) MountingBase
Material
MINIBARS - LED
----111
2222
1111
121212121212
12-24
12-2412-4812-2412-28
121212
12 or 24
0.81.21.62.01.21.62.6
3.83
3.83
10.58.610.58.6
101419241212
12-24
46364636
122102122102
-------
137137
----
23.2 x 12.2 x 2.123.2 x 12.2 x 2.123.2 x 12.2 x 2.123.2 x 12.2 x 2.115.8 x 8.3 x 4.515.8 x 8.3 x 4.513.3 x 6.3 x 5.8
22 x 8.3 x 4.322 x 8.3 x 5.8
15.8 x 8.3 x 4.5 15.8 x 8.3 x 5.8
22 x 8.3 x 4.322 x 8.3 x 5.8
15.8 x 8.3 x 4.5 15.8 x 8.3 x 5.8
-- -----
15101510
----
5 yrs5 yrs5 yrs5 yrs5 yrs5 yrs5 yrs
2 yrs2 yrs2 yrs2 yrs
2 yrs2 yrs2 yrs2 yrs
War-ranty
MINIBARS - ROTATOR
------
70/28080/32070/28080/320
80808080
80/48080/480
65/26065/26065/26065/260
MINIBARS - STROBE
31313131383839
33353741
32343640
160/640100/400160/480100/300
Minibars
AluminumAluminumAluminumAluminum
PolycarbonatePolycarbonateAluminum
AluminumAluminum
PolycarbonatePolycarbonate
AluminumAluminum
PolycarbonatePolycarbonate
676564646566666666676666686870707161616161
STUDWIRESTUD WIREPART NO.
CONNECTIONPG# SAE dB(A) VDC AMPS DIMENSIONS(LxWxH or DiaxW)
HOUSINGMATERIAL
War-ranty
BACK-UP ALARMS - SMART ALARMS (SELF ADJUSTING)
SA901SA914SA917SA920SA931SA940SA950SA951SA955SA980
820840872777
63636363636262626263
70707169
FFFFFFFFFF
B/DA/CA/CA/B/C
82-10787-11287-11297-11282-10287-11282-10277-9782-10282-102
87/10797/11297/11297/107/112
12-2412-2412-2412-2412-4812-2412-2412-4812-2436-80
12-3612-3612-3612-24
0.30.40.40.60.20.60.40.20.40.2
0.40.40.40.5
•
••
•
•••
••
••
••••
5.0 x 2.8 x 3.07.1 x 3.1 x 4.05.8 x 3.1 x 4.07.1 x 4.0 x 3.35.0 x 2.8 x 3.0
4.4 x 2.84.0 x 1.6 x 2.84.0 x 1.6 x 2.8
4.1 x 1.75.0 x 2.8 x 3.0
5.8 x 3.1 x 4.05.8 x 3.1 x 4.07.1 x 3.1 x 4.07.1 x 4.0 x 3.3
Eccolife
Eccolife
Eccolife
2 yrsEccolife
Eccolife
2 yrs2 yrs2 yrs
Eccolife
Eccolife
Eccolife
Eccolife
2 yrs
SteelSteelSteelNylonSteelNylonNylonNylonNylonSteel
SteelSteelSteelNylon
BACK-UP ALARMS - MANUALLY ADJUSTABLE
210410415435450505510520530575580585610630830850876
SV297SV202SV207SV212
PART NO.
CONNECTIONPG# SAE dB(A) VDC AMPS DIMENSIONS(LxWxH or DiaxW)
HOUSINGMATERIAL
War-ranty
BACK-UP ALARMS - FIXED dB(A)
CCCFADCCFBDCCBBAACFBA
97979710211287979710210787979710710711211297102107112
0.10.10.20.30.40.10.20.20.20.30.10.10.10.40.40.40.40.20.20.30.4
•
••••
••
••••
•
••••• ••• •
4.5 x 1.3 x 4.54.4 x 2.84.1 x 1.74.1 x 1.74.4 x 2.8
4.0 x 1.6 x 2.84.0 x 1.6 x 2.84.0 x 1.6 x 2.84.0 x 1.6 x 2.84.0 x 1.6 x 2.84.0 x 1.6 x 2.84.0 x 1.6 x 2.85.0 x 2.8 x 3.05.0 x 2.8 x 3.05.8 x 3.1 x 4.05.8 x 3.1 x 4.07.1 x 3.1 x 4.07.1 x 3.5 x 4.37.1 x 3.5 x 4.37.1 x 3.5 x 4.37.1 x 3.5 x 4.3
2 yrsEccolife
2 yrs2 yrs
Eccolife
2 yrs2 yrs2 yrs2 yrs2 yrs2 yrs2 yrs
Eccolife
Eccolife
Eccolife
Eccolife
Eccolife
Eccolife
Eccolife
Eccolife
Eccolife
NylonNylonNylonNylonNylonNylonNylonNylonNylonNylonNylonNylonSteelSteelSteelSteelSteelNylonNylonNylon Nylon
Back-up Alarms
120/360
1212-3612-2412-2412-3612-24
1212-2412-2412-2412-8012-4812-3612-3612-3612-3612-3612-2412-2412-2412-24
BEACONS - STROBE
96
part number index
www.eccolink.com phone 1-800-635-5900 fax 1-800-688-3226
BEACONS5715 195715-VM 195725 195725-VM 195810 205811 205813 205813-MG 205813-VM 205815 215816 215840 215850 216010 186015 186220 17 6225 17 6226 17 6260 166266 166400 156410 156410-MG 156460 146460-MG 146520 136524 136530 136534 136550 126550-MG 126550-VM 126551-MG 126571-MG 126570 126570-MG 126570-VM 126650 116650-MG 116655 116670 116670-MG 116675 116690 116695 116710 106720 106750 106770 106950 96950-MG 96950-VM 96951-MG 96955 86970 96970-MG 96970-VM 96971-MG 9 6975 86990 96995 87160 37160-VM 37460 4
7460-VM 47660 57660-VM 57940 77940-VM 77960 67960-VM 6LIGHTBARS / MINIBARS 10-00047-E 2310-00048-E 2310-00049-E 23 10-00051-E 2315-00011-E 3115-00013-E 3115-00015-E 3115-00019-E 3115-00035-E 2415-00036-E 2415-00037-E 2415-00038-E 2415-00039-E 2420-00042-E 2520-00044-E 2520-00177-E 2520-00178-E 2530-00012-E 2630-00052-E 2630-00053-E 2630-00054-E 2630-00058-E 2630-00079-E 2730-00081-E 2730-00082-E 2730-00106-E 2730-00107-E 2730-00110-E 2730-00116-E 275135 365135-VM 365150 375150-VM 375186 385186-VM 385188 385188-VM 385280 395221001 345221002 345221003 345221004 345221005 345315 40 5315CAA 405315CAA-VM 405315-MG 405315-VM 405325 405350AAA 415350AAA-VM 415350ACC 415350ACC-VM 415350CAA 415350CAA-VM 415350CAC 415350CAC-VM 41
5362001 305362002 305363001 305450AAA 355450ACC 355450CAA 355450CAC 355483001 30 5483004 306221001 326221002 326221003 326221004 326221005 336221006 336221007 336221009 336363001 286363003 286483001 286483002 286483003 286483011 286543001 296543002 296543018 296543020 296543050 29 6545001 296603003 296603060 296605003 296605004 296605005 296605055 29SAFETY DIRECTOR™
3015 423015H 423035 423035H 423055 423055H 423215 423235 423315 433335 433355 433415 433435 43LED DIRECTIONAL LIGHTS3610 443615 443620 44 3625 443630 453635 453710 463720 463730 473760 463770 463810 483820 483860 483870 48
3940 493960 499010 509011 51LIGHTING SYSTEMS2000 552025 552030 552031 562040 562045 562065 562110 562140 562160 562350AAA 572350ACC 572350CAA 572350CAC 572550 572570 572650 572655 572670 572675 579001 549006 549050 549070 549230 539230-X 539460 529460-X 52 & 549915(S) 549920 549925 549935(S) 549950(S) 54BACK-UP ALARMS210 67415 64435 64410 65450 65505 66510 66520 66530 66575 67580 66585 66610 68630 68777 69820 70830 70840 70850 70872 71876 71 SA955 62 & 64SA940 62 & 65SA950 62 & 66SA951 62 & 66SA901 63 & 68
SA931 63 & 68SA980 63 & 68SA920 63 & 69SA917 63 & 70SA914 63 & 71SV202 61SV207 61SV212 61 SV297 61WARNING ALARMS, SWITCHES & SENSORS110-000 73111-000 73112-001 75112-002 75201120 74202110 74202120 74204120 74208120 74209120 74CT530-2LDW 72DF532 72DS-1500 74DT500 73DT500FP-LWC 73FH575 72FH577 72MS90 73MS90-24 73RMS1000 74SW10 75SW15 75SW30 75CAMERA SYSTEMSC101 83 C1000 83C2000 83C2002 83C2003 83C2004 83CB20 84CB40 84CB41 84DVR01 84DVR04 84K3500 77K5010 77K5600 78K5601 79K5602 79K7000 80K7001 81K7002 81M500 82M3500 82M5600 82 M5601 82M7000 82M7001 82ACCESSORIES & REPLACEMENT PARTS All Product Lines 86-92
Local Presence in Global MarketsECCO Group Facts• ECCO started in 1972• Current leadership since 1985• ECCO Group Headquarters located in Boise, Idaho• European Division located in Leeds, England• Pacific Asia Division located in Launceston, Tasmania• ECCO Group formed in 2004• A 6-Sigma Company• 80% of ECCO's revenue comes from products introduced since 1998• World’s largest manufacturer of back-up alarms• World’s largest manufacturer of amber warning lights and back-up alarms combined• Industry leader in innovation and new products• World’s most complete range of emergency warning products for commercial vehicles• Serving over 1000 distributors globally• Supplying over 500 vehicle manufacturers worldwide
• First company founded to specifically manufacture back-up alarms• First manufacturer of amber warning lights and back-up alarms to be registered to ISO 9001 international quality standards• The Smart Alarm® was the first self-adjusting back-up alarm• The Smartstrobe® was the first self-adjusting strobe beacon• First flush mounted back-up alarm in a standard 4.5” lighting grommet• First Reverse Motion Sensor that activates the alarm every time vehicles move backward . . . in any gear . . . ignition on or off• First company to offer life of the vehicle warranty on heavy duty back-up alarms• First single unit back-up alarm and first single unit strobe light to cover 12-80 VDC range• First strobe light with field-selectable flash rate and light intensity adjustment• The Navigator® was the first remote system to integrate LED and strobe warning lights and the first LED warning system for vehicles• First back-up alarms to be AMECA certified to SAE standards• i.beam® was the first strobe beacon with a diagnostic signal to replace the flash tube
Industry “Firsts”
ECCO Group Headquarters
© Electronic Controls Company - May 2008 PG2008 (50K)
Distributed by:
833 West Diamond StreetBoise, Idaho 83705
T: 800-635-5900 or 208-395-8000F: 800-688-3226 or 208-395-8190
www.eccolink.com
Group Headquarters & North American Division European Division
Victoria Industrial Park Victoria Road, LeedsEngland LS14 2LA
T: +44 (0)113 237 5340F: +44 (0)113 237 5360www.visionalert.co.uk
Pacifi c Asia Division
25 York StreetLaunceston, Tasmania
7250, Australia
T: +61 (0)3 63322400F: +61 (0)3 63322490www.hazard.com.au
www.eccogroup.com
A 6 - Sigma Company
7 58379 03854 3