ecc post install steps

8/13/2019 Ecc Post Install Steps

1/42

TECHNICAL PROCEDURE

ECC Installation Post-steps Procedure

Version 0.1a

WAS 6.40 ABAP

Document Information

Project Name:

GCS team: SAP & DB Technica Dei!er"

Document I#: $CC%PST%INSTA''%ST$PS.#oc Version0.1a

Status of the #ocument

Status

First draft

Document of work for workgroup comments

Document for validation

Final document for diffusion

Distri(ution 'ist

To Action) Due Date Comment

Cc Action) Due Date Comment

Action Types: Approve, Review, Inform, File, Action Required, Attend Meeting, Other (plese specify!

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !" 4#


2/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

Version *istor"

Version Date +e!ise# B" Descri,tion

Vai#ation

-uait" +e!ie /etho#: +e!ie (" entities in!o!e#Prepared B$%

&eviewed B$%

'alidated level ! ($ %

Date%

'alidated level # ($ % Date%

Date%

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page #" 4#


3/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

Ta(e of contents

1. (ject : .........................................................................................................................................................

!.!. Scope..................................................................................................................................................... 6

!.#. )nputs and referenced documents.........................................................................................................6

!.*. )nvolved SAP transaction+ ..................................................................................................................... 6

2. Pre3re4uisites................................................................................................................................................ 5

#.!. )nstalling t,e SAP s$stem -central and data(ase instance.................................................................../

#.#. ,ecking and monitor t,e data(ase freespace....................................................................................../

#.*. ,ecking transport director$ freespace................................................................................................. /

#.4. 1urning off arc,ive log mode................................................................................................................. /

6. Before startin7 the SAP S"stem.................................................................................................................. 5

*.!. ,ecking " 2pdating t,e SAP 3ernel...................................................................................................../

"#$#$# %hec&ing 'ernel relese####################################################################################################################

"#$#)# *pdting &ernel to ptch $)+##############################################################################################################

"#$#"# Instlling the -A. /icense##################################################################################################################

*.#. ,ecking instance profile parameters values........................................................................................

"#)#$# %hec&ing 0 Importing Instnce profile#################################################################################################+

"#)#)# %hec&ing prmeters rdisp01ufrefmode##############################################################################################+

*.*. Starting t,e SAP s$stem...................................................................................................................... !0

8. 9hen SAP S"stem as Starte#................................................................................................................. 10

4.!. 2ser reation and ,eck..................................................................................................................... !0

2#$#$# %rete the dminsp user in client 333############################################################################################ $3

2#$#)# %hec&ing 0 chnge pssword for -A.4 nd 55I% in client 333########################################################$3

4.#. 15S onfiguration............................................................................................................................... !0

2#)#$# %hec&ing 6 Modifying the trnsport directory###################################################################################$3

2#)#)# -738 9 .erform post Instlltion ts&s############################################################################################## $$

2#)#"# Adding the new -ystem to the trnsport 5omin############################################################################## $$

4.*. onfigure Access to nline support services -SS........................................................................... !#

4.4. 2pgrading t,e Support Package level..................................................................................................!*

4.7. ,ecking Brtools &elease.................................................................................................................... !4

4.6. )nstalling additional languages............................................................................................................. !4

2#8#$# -A. instlled from relese -R3####################################################################################################### $2

2#8#)# -A. Instlled from relese -R$ or other##########################################################################################$

2#8#"# /nguge Instlltion procedure document######################################################################################$

2#8#2# Instlling lnguge prt of support pc&ges###################################################################################$

2#8## /nguge -upplementtion############################################################################################################## $

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page *" 4#


4/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

2#8#8# Adding the new lnguge letters to the 57FA*/T profile################################################################ $8

4./. onfiguring operation modes............................................................................................................... !6

2##$# %onfigure one 5ily opertion mode (more dilogue processes!#####################################################$8

2##)# %onfigure ;ight Opertion mode (more 1tch processes!###############################################################$

2##"# Time t1le configurtion################################################################################################################### $+

2##2# Activte the opertion mode nd perform n opertion mode switch###############################################)3

4.8. reating t,e Working client-s.............................................................................................................. #0

2##$# %rete /ogicl destintion for the new client(s!################################################################################)3

2##)# %reting the new client##################################################################################################################### )$

2##"# %opying client 333 into the new client##############################################################################################)$

4.. Sc,eduling SAP standard 9o(s........................................................................................................... ##

2#+#$# %reting .rogrm vrints################################################################################################################ ))

2#+#)# %reting -A. ?MM .rmeters (Oss note +"))!######################################################################)"

2#$3#"# Adpting Orcle .rmeters########################################################################################################## )2

2#$3#2# Adpting Orcles -pce Mngement technicl specifictions######################################################)

4.!!. SAP :oad generator.......................................................................................................................... #7

4.!#. ,eck t,e installation validit$............................................................................................................. #7

4.!*. Data(ase tools................................................................................................................................... #7

2#$"#$# 5t1se chec############################################################################################################################# )

2#$"#)# T1lespces %hec####################################################################################################################### )

2#$"#"# -chedule 5@$"


5/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

7.4. onnect to 2A................................................................................................................................... *#

7.7. onnect to S:21)> 5A>A=?&.....................................................................................................*#

7.6. onnect to )....................................................................................................................................... **

7./. S:D registration................................................................................................................................... **

##$# %hec&ing n lredy registered system############################################################################################ ""

##)# Register newly creted system in -/5##########################################################################################"2

7.8. ,eck t,at S>1? can connect on SAP>?1......................................................................................*4

##$# %hec&ing -prouter configurtion:################################################################################################### "2

##)# %hec&ing spnet conneion############################################################################################################# "

7.. SAP>>?1 onfiguration.............................................................................................................. *6

#+#$# AI> (%entrl instnce! configurtion:################################################################################################"8

#+#)# /inu (Appliction servers! %onfigurtion:########################################################################################"8

#+#"# -A. -ystem configurtion:############################################################################################################### "8

7.!0. onnect to SAP>?1.......................................................................................................................... *8

. $terna Toos Confi7uration..................................................................................................................... 6;

6.!. 1ivoli and 5onitoring onfiguration..................................................................................................... *8

8#$#$# %reting Orcle user for Tivoli########################################################################################################## "

8#$#)# /ivr1le for Tivoli monitoring tem####################################################################################################"+

8#$#"# Import Tivoli trnsport order############################################################################################################# "+

8#$#2# %reting -A. user TI?O/IBC-I5D################################################################################################### "+

8#$## /ivr1le for -A. Monitoring Tem (runtem!################################################################################### "+

6.#. ontrol;5 configuration........................................................................................................................ *

8#)#$# Adding 0 chec&ing the -7T*;I%O5F/AE to the trnsport profile####################################################"+

8#)#)# Importing the necessries trnsport orders######################################################################################"+

8#)#"# Request control9M gent instlltion################################################################################################ 23

5.


6/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

1. (ject :

1,e o(@ective of t,is procedure is to descri(e t,e post installation steps for an ? " =5& installation.Post )nstallation starts from t,e point were data(ase was successfull$ installed.

1.1. Sco,e

1,e list ,ereafter states w,ic, s$stems t,ese procedure is related to%

In,ut > Document Sco,e

A::

1.2. In,uts an# reference# #ocuments

1,e lists of t,e inputs and documents are given ,ere after%

In,ut > Document T",e Date ri7in

B+IDG$%A''%*o%to%#ecare%as%a %C?A %cient!0.1a.#oc

B+IDG$%$CC%SAP%STA+T%STP%V1.0a.#oc SAP Start " stop 07.!#.#006 Build

B+IDG$%A''%SPA/3SAINT3SP3?PD.#oc SPs 2pg Build

B+IDG$%A''%SAP%'ANG?AG$%I/P+T%&%S?PP'$/$NTATIN.#oc

:anguage import. Build

1.6. In!o!e# SAP transaction@

&!0 " &!! S:)?>S? S20! S?06 S15S S?*8

DB0# SS! S5*6 &0* &04 BD74 S4 S: S* &/0 S:DAP)2S1 S57 DB!*

S5SC SSAA

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page 6" 4#


7/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

2. Pre3re4uisites.

2.1. Instain7 the SAP s"stem centra an# #ata(ase instance

1,e ? S$stem -entral instance and data(ase ,ave to (e successfull$ installed.

2.2. Chec=in7 an# monitor the #ata(ase frees,ace.

,eck data(ase freespace wit, DB0# and use (rtools to add new files for ta(lespaces%

SCS1?5+ PSAP? and PSAP?640.

2.6. Chec=in7 trans,ort #irector" frees,ace.

,eck freespace in t,e "usr"sap"transEdirector$

)n red t,e space used in t,e transport director$.

2.8. Turnin7 off archi!e o7 mo#e

For several operation ,ere -ecept (r(ackup and or (rarc,ive test and configuration its (etter to deactivatearc,ivelog mode -performances are (etter and no risk to ,ave an arc,ival stuck.

6. Before startin7 the SAP S"stem.

6.1. Chec=in7 > ?,#atin7 the SAP erne.

At t,e end of t,e oracle installation $ou will (e prompted for starting SAP instances and an &F logon isperformed onto t,e SAP s$stem. 2pdating wit, t,e new kernel patc, could ,elp $ou to solve some pro(lems.

)f $our kernel is at an earlier release $ou can ,ave several possi(ilities of error wit, sapstart.

Work process are started (ut s,utting down after starts.

&F logon could not (e eecuted.

Start profile was not found

G.

6.1.1. Chec=in7 erne reease.

For '! S$stems+ SAP =erne .80 has to (e at ,atch e!e 12.

*o to chec= =erne e!e:

:ogon to se A) server wit, user sidHadm.

2se command IdispJworkK + and c,eck displa$ed values.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page /" 4#


8/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

6.1.2. ?,#atin7 =erne to ,atch 12.

,eck t,e new sap kernel target -patc, level !# for '! s$stems.

,eck t,e new kernel location.

:ogon to $our A) server wit, root user.

Stop completel$ $our sap s$stem -Jsaposcol.

=o into $our sapmntS)DW director$% cd /sapmnt/

Rename the kernel directory to old.exe: mv exe exe.old

Create une new directory /sapmnt//exe mkdir exe!.

%hec& directory permission (should 1e !#

=o into t,e new kernel location.

op$ t,e new kernel files to t,e new ee director$ -cp Lp M "sapmnt"S)DH"ee.

?ecute t,e script saproot.s, -in ee director$% ."saproot.s,

1,is script give all necessar$ owner and permission to t,e kernel files.

,eck t,e new kernel release ($ usin -dispJwork.

6.1.6. Instain7 the SAP 'icense

:ogon to service.sap.com under t,e following link and ask a new license for $our s$stem%

e"s & +e4uests.+e4uest icense =e"

:ogon to t,e A) server wit, sidHadm user

https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/lik_mysap/select_installation.htm?smpsrv=https%3A%2F%2Fwebsmp206.sap-ag.dehttps://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/lik_mysap/select_installation.htm?smpsrv=https%3A%2F%2Fwebsmp206.sap-ag.de


9/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

2se command% saplicense Linstall to install t,e new license wit, paramters etracted from

t,e SAP>?1 site.

Cou can use later in SAP+ t,e transaction S:)?>S? to c,eck it.

2se S'IC$NS$transaction to c,eck and update t,e SAP :icense informations.

:aunc, S'IC$NS$and c,eck t,e result.

For luster environnement+ $ou must install two licenses -one for eac, cluster node+ etract ,ardware ke$ oneac, of t,e node.

6.2. Chec=in7 instance ,rofie ,arameters !aues.

6.2.1. Chec=in7 > Im,ortin7 Instance ,rofie.

Be sure to ,ave a sufficient num(er of work processess -D)AN8+ B1N4G

5ake an import of t,e SAP profile to (e sure t,at t,e view displa$ed in SAP is in p,ase

wit, t,e profile at t,e S :evel.

1o do t,at%

&!0Goto /enu ?tiies Im,ort ,rofies f acti!e ser!er.

,eck all values contained in instance and default profiles.

6.2.2. Chec=in7 ,arameters r#is,>(ufrefmo#e

Parameter Descri,tion Buffer +efresh /o#e:

'alue% sen#on@eeautotells t,e &"* S$stem to log all c,anges

'alue% sen#off@eeoffdeactivates t,e (uffer s$nc,roniOation.

1,e default setting sendon+ eeauto means t,at t,e (uffer s$nc,roniOation is activated -all c,anges arelogged.

sen#onmeans t,at c,anges to (uffered o(@ects are logged in t,e ta(le DD:=

eeautomeans t,at t,e local (uffer is (roug,t up to t,e newest state ($ c$clical

processing of t,e new DD:= records.

1,is parameter ,ave to (e added in t,e D$(uferfmo#e

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page " 4#


10/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

)F A,,ication ser!ers% value N sen#on@eeauto)F N A,,ication ser!ers% value Nsen#off@eeauto

6.6. Startin7 the SAP s"stem.

)f all preceding steps are well done+ $ou can now start t,e SAP s$stem.

1o do it+ use t,e rig,t start procedure depending of t,e s$stem t$pe -ABAP+ 9A'A+ etc..

2se t,e following procedure to do it%

B+IDG$%$CC%SAP%STA+T%STP%V1.0a.#oc

8. 9hen SAP S"stem as Starte#.

8.1. ?ser Creation an# Chec=.

8.1.1. Create the a#minsa, user in cient 000.

reate t,e adminsap user wit, SAPEA:: " SAPE>?W profile.

8.1.2. Chec=in7 > chan7e ,assor# for SAP) an# DDIC in cient 000.

2se +S?+006program to c,eck for standard password+ c,ange t,em if necessar$.

Cou must ,ave t,e following result after modified all users standards passwords.

8.2. T/S Confi7uration.

8.2.1. Chec=in7 E /o#if"in7 the trans,ort #irector".

2se &!! wit, parameter name IDI+%T+ANSK to c,eck t,e actual transport director$.

,eck wit, t,e ,ange and ontrol 1eam w,ic, transport director$ ,as to (e used.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !0" 4#


11/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

1,is profile value ,as to (e set in the FD$


12/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

:aunc, S15S.

=o to 5enuverviews$stems.

Accept t,e new s$stem waiting for appro(ation in t,e s$stem list. ,eck and adapt t,e transport route of t,e s$stem in t,e domain controller -to (e done

($ or wit, t,e ,ange and ontrol team.

2se t,e c,eck funuction in S15S to c,eck if t,e transport director$ is reada(le and

writa(le from newl$ created s$stem.

8.6. Confi7ure Access to nine su,,ort ser!ices SS.

Access to% ,ttp%""service.sap.com"support and select $our s$stem )D%

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !#" 4#


13/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

And define t,e s$stem data of t,e new instance %

SCS1?5DB S?&'?&APP:)A1)> S?&'?&

Cou must define in SCS1?5 ta(s t,e name of t,e saprouter used to access to t,e s$stem.

8.8. ?,7ra#in7 the Su,,ort Pac=a7e e!e.

Depending of t,e release of t,e D used for t,e installation $ou could (e at stack or 0+ and $ou ,ave toinstall some support package to go to t,e Bridge &elease target level in term of support packages.

,eck (elow t,e target release of Support package and Add;on for t,e '! core model.2se t,e following procedure to upgrade t,e Support package release.

B+IDG$%A''%SPA/3SAINT3SP3?PD.#oc

'! ore model L ABAP ; Support Package release target level.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !*" 4#


14/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

NA/ $ +$'$AS$ P'

SAPEBAS)S 640 !6

SAPEABA 640 !6S1;P) #007E!E640 4

P)EBAS)S #007E!E640 6

SAPEBW *70 !6

SAPEAPP: 700 !#

SAPE


15/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

8..2. SAP Instae# from reease S+1 or other.

! )nstall SAP -configure tms.# )nstall :anguage.* Supplement language.4 2pgrade Support package level.

8..6. 'an7ua7e Instaation ,roce#ure #ocument.

2se t,e following procedure to do it%


8..8. Instain7 an7ua7e ,art of su,,ort ,ac=a7es.

1,is step ,as to (e performed for eac, new language -,ere% Frenc,+ Spanis,+

,inese.

1o do it+ use t,e c,apter 7 of t,e :anguage import document.


8... 'an7ua7e Su,,ementation.

Perform t,e language supplementation for all new languages installed -,ere% Frenc,+

Spanis,+ ,inese.Supplementation language for all installed language must (e ?>=:)S


16/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

8... A##in7 the ne an7ua7e etters to the D$


17/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

=oto Menu7ditOpertion Mode%onfigure#

,oose IreateK

Fill in t,e details.

Save $our entries

Select t,e new operation mode -d(l click.

,oose Menu-ettings@sed on ctul sttus;ew instncesEenerte#

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !/" 4#


18/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

8.5.2. Confi7ure Ni7ht ,eration mo#e more (atch ,rocesses.

Do t,e Same to create a nig,t peration mode wit, less dialogue process and more

(tac, process.

Dou(le click on t,e >ig,t operation mode

D(le click again.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !8" 4#


19/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

,oose t,er operation mode.

onfigure t,e num(er of work process for t,e >ig,t mode. Cou must t,is kind of result.

,oose Save.

8.5.6. Time ta(e confi7uration.

,oose editoperation mode1ime ta(le.

Select t,e time interval for t,e IDACK -from / A5 to #0 P5.

Assign t,e rig,t operation mode -for nig,t and da$.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page !" 4#


20/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

=o (ack and launc, again transaction &0*.

8.5.8. Acti!ate the o,eration mo#e an# ,erform an o,eration mo#e sitch.

,oose 5enuontrolSwit, peration 5odeAll servers.

1,is action adapt t,e num(er of work process in t,e s$stem wit, t,e num(er defined

in t,e operation mode configuration.

Cou must ,ave t,is kind of result.

,eck in S570 if t,e work process num(er is correct.

8.;. Creatin7 the 9or=in7 cients.

Ask $our responsi(le to know hich cients ha!e to (e create#.

8.;.1. Create 'o7ica #estination for the ne cients.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page #0" 4#


21/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

:aunc, transaction BD74.

,oose (utton

=ive t,e new logical s$stem name -must (e% S)DH:>1clientH+ eg% P:=:>1#80.

)f asked for a transport reuest+ create it wit, name PS1 )>S1A:: 1AS3 D >1

1&A>SP&1H.

Save $our entries

8.;.2. Creatin7 the ne cient.

:aunc, transaction S4.

Switc, to c,ange mode

2se Fil in $our entries

5andataor$ entries are% 'o7ica s"stem@ cient num(er@ cient roe-not prod to a(le

to do t,e client cop$.

Save $our entries

8.;.6. Co,"in7 cient 000 into the ne cient.

:ogon to t,e ne cientwit, user SAPM and password IpassK.

:aunc, transaction SCC'

Add t,e ne cient as cient tar7et.

Add Cient 000 as source cient.

,oose ,rofie SAP%A''

:ike t,e following screen.

2se (utton

'alidate t,e popup and dont c,ange t,e client profile SAPEA::.

,eck t,e settings

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page #!" 4#


22/42


23/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

For all '# s$stems+ SAP @o( ,ave to (e launc,ed ($ contro3/ sche#uer+ to do t,at a jo( ha!e to (e

create# in SAP ith the status sche#ue#+ control;5 t,en connect SAP s$stem+ make a cop$ of t,e created@o( and launc, it following t,e sc,edule attri(utes.

So+ if control;5 is active+ ask t,e control;5 team to sc,edule t,e sap standard @o( list.

8..2. Creatin7 SAP jo(s.

:aunc, transaction S5*6.

2se (utton

2se Button

2se S5*/ 1o c,eck t,at @o(s were reall$ IreleasedK

Select created @o(s and c,ange t,em to status sc,eduled.

Some other jo(s i=e C?A jo(s etc.. ha!e to (e manua" create# use the stan#ar#

jo(s #ocumentation to #o it.

8.10. A#a,tin7 the SAP@ race an# S ,arameters.

1,e following document was created for SAP@ +AC'$@ AIJ an# 'IN?J ,aramtersto ,elp $ou to adapt $ourinstance profile parameters.B+IDG$%A''%SAP an# race Parameters.s

8.10.1. A#a,tin7 SAP Parameters SS notes 106585 & 6;851.

Follow t,e following procedure to c,ange $our SAP parameters.B+IDG$%A''%*o to mo#if" Profie Parameters.#oc

Brief":

onnect $our SAP s$stem wi, SAPEA:: aut,oriOations.

:aunc, &!0

,oose t,e profile -instance or default profile.

Swit, to c,ange mode

:ook for t,e parameter to modif$. ,ange t,e value or create t,e new parameters if t,e$ dont appears in t,e profile.

2se &!! to displa$ t,e default value for parameters not in t,e profile.

Save+ ,eck and activate $our profile.

&estart t,e SAP instance.

:et t,e S$stem running during e few da$s to anal$Oe t,e performance and t,e profile

c,ange impact.

8.10.2. Chec=in7 AIJ V// Parameters ss note 56225

1,ose settings would onl$ (e c,anged ($ t,e infrastructure team+ so $ou ,ave onl$ to c,eck and ask t,em ifsome modifications are needed.

'55 means% Virtua /emor" /ana7ement.

:ogon to t,e A) server wit, root user.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page #*" 4#


24/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

:aunc, smitt$ command

,oose%

,oose%

,oose%

,eck 1,e followings parameters.

minpermR N * -default #0mapermR N 0 -default 80maclientR N 0 -default 80lruEfileErepage N 0 -default !strictEmaclient N ! -default !strictEmaperm N 0 -default 0

8.10.6. A#a,tin7 race Parameters

2se t,e following documentation% B+IDG$%A''%SAP an# race Parameters.s

To #o it:

:og on data(ase instance wit, orasidH user.

=o to director$ "oracle"S)DH"#0E64"d(s

5ake a cop$ of t,e file% initS)DH.ora -cp Lp initS)DH.ora initS)DH.(ackupEdateH. :aunc, command (rtools

,oose I!K for instance management.

,oose

,oose

Fill t,e parameter name to modif$ J enter.

,oose IK for continue.


,oose

,oose

Set t,e parameter value.


,eck t,e command return.



25/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

1,e parameter was correctl$ modified in pfile and spfile+ so t,e value was d$namicall$ activated and persistent(ecause created in oracle pfile and spfile.

8.10.8. A#a,tin7 races S,ace /ana7ement technica s,ecifications.

B$ default w,en installing racle data(ase+ all ta(lespaces ,ave t,e autoetend attri(utes set to IonK+ t,e(ridge specification are to c,ange t,is value for autoetend IoffK+ -and ot,er attri(utes.

So c,eck t,e following documentation -B+IDG$%A''%race S,ace /ana7ement Technica S,ecs.s and appl$ all recommendations -ask $our data(ase administrator if $ou ,ave some uestion regarding t,oseparameters.

8.11. SAP 'oa# 7enerator.

For more information a(out t,e load generator $ou use t,e following procedure.B+IDG$%A''%*o to 7enerate ,ro7rams.#oc

Be sure to ,ave arc,ivelog mode turned FF.

onnect wit, user adminsap in an$ client of $our s$stem.

:aunc, transaction S=?>

,oose t,e (atc, mode for t,e load generation

,oose generate A:: (@etcs.

Duration is a(out * ,ours+ depending of $ou s$stem arc,itecture -one or several SAPs$stem on t,e same ,ost and t,e selected component to generate.

8.12. Chec= the instaation !ai#it".

2se t,e tcode S5#8 or S)3 to c,eck t,e SAP s$stem installation. >o errors ,ave to (e reported.

1,e result ,as to (e as follow %

8.16. Data(ase toos.

8.16.1. Data(ase chec=.

2se t,e tcode DB!6 to launc, a d(c,eck or eecute t,e command I(rconnect Lf c,eckK underA). -1,e result will (e visi(le in t,e DB!6. ,eck t,e errors+ and correct t,em.

8.16.2. Ta(es,aces Chec=.

2se DB0# tcode to c,eck t,e ta(lespace freespace and at os level t,e sapdata file s$stemfreespace -reported ($ t,e DB c,eck -DB!6 and datafiles distri(ution+ c,eck also t,at t,eta(lespaces are in Autoetend FF -use t,is doc% B+IDG$%A''%SAP & +AC'$Parameters +ecommen#ations.#oc.



26/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

8.16.6. Sche#ue DB16 jo(s

)f control;5 is not used+ use d(!* to sc,edule+ (ackup+ d(c,eck and B statistics.ontrol will onl$ (e used starting from '# s$stem -for '!+ onl$ prod and pre;production s$stems are using it.

,eck t,e specific recommendation for $our (ackup polic$.


27/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

6 E +ecreate the s,fie :

2se command%

create spfile from pfileQ

8 E Start the #ata(ase.

E /a=e a o7 sith to chec= that 7enerate# archi!e name is correct.

2se command%

alter s$stem switc, logfileQ

,eck in t,e oraarc, director$ t,at arc,ive names are correct.

?emple in T='.

8.18. Chec=in7 for S"stem Critica errors.

2se S5#! tcode and make sure t,at t,ere are no permanent critical errors in t,e SAP s$stemlog.

8.1. Chec=in7 ABAP Dum,s.

2se S1## tcode and c,eck t,at t,ere are no critical dumps generated.

8.1. Chec=in7 or creatin7 the interface #irector" at S e!e.

1,e interface file s$stem and " or director$ was created to store interface files at S level and to ec,angedata wit, ot,er s$stems.

2se t,e following documentation " specifications.

B+IDG$%A''%Chec=in7 Interfaces #irectories.#oc

8.1.1. Create the SAP Director" Interface ith A'11.

2se A:!! tcode to create t,e new SAP Director$.

; ,oose; ?nter t,e Director$ >ame % "usr"sap"S)DH"interfaces

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page #/" 4#


28/42


29/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

.1.1. Create the 'o7ica S"stem Names.

?ecute transaction BD74. ,eck t,at t,e needed :ogical S$stems are defined at (ot, side.

>ote %

&efer to t,e following document -or ask t,e design team to know wic, s$stem ,ave to (e

configurated to ec,ange data wit, t,e new one.%

N:GTCCTechnica%Desi7n%an#%Bui#023SAP&DBBui#013Desi7n'an#sca,eIn#iaPD$3TA3CS3'an#sca,e%DetaiDesi7n3V32231030.s

.1.2. Chec=in7 +ote %

&efer to t,e following document -or ask t,e design team to know wic, s$stem ,ave to (e

configurated to ec,ange data wit, t,e new one.%

N:GTCCTechnica%Desi7n%an#%Bui#023SAP & DB Bui#013 Desi7n'an#sca,e

In#iaPD$3TA3CS3'an#sca,e%DetaiDesi7n3V 32231030.s

.1.6. Chec=in7 inte7rate# ITS.

.1.8. ITS a##ress to use for ITS chec=s.

I,ttp%"",ostanmeH.eud.sc,neider;electric.com%80instance num(erH"sap"(c"gui"sap"its"we(gui"UK

?emple%

,ttp%""irserv.eud.sc,neider;electric.com%8000"sap"(c"gui"sap"its"we(gui"U

,ecking t,e )5 status %

2se S5)5 tcode and c,eck t,e )5 Status %

2se tcode S)1SP5> and c,eck t,e )1S Status %

?se SIC< to chec= the a!ai(iit" of the ser!ices CI an# AS

DefaultE,ostsap(cguisapitswe(gui

)f t,e we(gui is in gra$ color+ it mean t,at t,e service is deactivated %

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page #" 4#
http://irserv.eud.schneider-electric.com:8000/sap/bc/gui/sap/its/webgui/http://irserv.eud.schneider-electric.com:8000/sap/bc/gui/sap/its/webgui/


30/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

&ig,t clic on Iwe(guiK and IActivate ServiceK -1,en clic IC?SK

,eck in transaction S/IC/MenuEoto.rmeters5isplyif t,e ,ostname full iscorrect -#ifferent name for CI ans AS.

,eck parameter icm>host%name%fu on t,e ) and t,e AS.,eck parametericm>ser!er%,ort%0 O P+TO*TTP@P+TO;0""


31/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

)n case of application servers+ entral )nstance does not ,ave to (e added to t,ose logon group B&)D=?.

.6. Chec=in7 > Chan7in7 IGS Confi7uration.

:aunc, S57+ and c,eck t,e &F Destination IGS%+


32/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

.8. Connect to C?A.

&efer to t,e document % IB+IDG$%A''%*o%to%#ecare%as%a %C?A %cient !0.1a.#ocK

.. Connect to S'?TIN /ANAG$+.

B&)D=?EA::% F*o to Decare a Soution mana7er sateite.#oc

Im,ortant: Be sure that the user use# to initiaie communication a#minsa, (" eem,e ha!e thenecessaries authoriations roes on the tar7et s"stem: FH%+


33/42


34/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

2se S:D


35/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

.;.2. Chec=in7 sa,net conneion.

First+ set t,e s$stem status to modifia(le in S?06 -dont forget to close it after t,e c,eck

1o (e a(le to succesful$ download t,e test SS note+ $our s"stem chan7e o,tion ha!e to

set to Fmo#ia(e ith SCC8 an# S$0 transaction.

2se S>1? tcode and download a test note to c,eck t,e connection %

2se t,e note num(er 0001to test t,e sapnet conneion.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page *7" 4#


36/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

1,e test is ok if t,e note was successfull$ downloaded.

.. SAPCNN$CT Confi7uration.

SAPconnect is used to send email from sap s$stem+ use transaction S1 to configure sap s$stem.onfiguration ,ave to done at S level too.

1,e smtp server name is% smt,a.eu#.schnei#er3eectric.com

1,e smtp server ip address is% 10.1;.21.202

..1. AIJ Centra instance confi7uration:

,eck in "etc",osts t,e following%

,eck "etc"sendmail.cf t,e following%

..2. 'inu A,,ication ser!ers Confi7uration:

nl$ t,e ,ost file ,ave to (e configured on :inu%

..6. SAP S"stem confi7uration:

:aunc, S1 transaction

Dou(le click on t,e S51P node and c,eck t,e following.



37/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

lic on ISetK -for )nternet+ and c,eck t,e Address area -IMK%

,eck t,e following in t,e menu pat,% S15enusettingsDefault domain.

,eck t,e following in t,e menu pat,% S15enusettingsonfirmation of receipt.

ECC_Installation_Post-steps Procedure (Technical Validation) v0.1a.doc Page */" 4#


38/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

,ecking functionalit$ ($ using SB9Pto send a new message -,erform this test from the Centra Instancean# from A,,ication ser!ers.

.10. Connect to SAPN$T.

5ake sure t,e s$stem is defined at SAP wit, t,e correct connection data. =o to,ttps%""we(smp!07.sap;ag.de"access;support

Select I5aintain onnectionK %

Searc, for t,e SAP S$stem and t,en select it %

1,en select IS$stemdataK to c,eck t,e relevant informations %

. $terna Toos Confi7uration.

.1. Ti!oi an# /onitorin7 Confi7uration.

Cou can use t,e followings doc for t,e 1ivoli " SAP configuration%

.1.1. Creatin7 race user for Ti!oi.

https://websmp105.sap-ag.de/access-supporthttps://websmp105.sap-ag.de/access-support


39/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

:ogon to t,e data(ase server wit, user orasidH and launc, slplus.

?ecute t,e following command to create t,e 1ivoli users%

SQL> create user tivoli identified by values '1E62F0186A87E!"' defaulttables#ace $SA$%& te#orary tables#ace $SA$(E&$)

*rant dba to tivoli)

.1.2. 'i!ra(e for Ti!oi monitorin7 team.

2ser and password for oracle count tivoli

S)D

racleE and SA.SCS1?5.

.1.. 'i!ra(e for SAP /onitorin7 Team runteam.

chec=in7 the S$T?NICD


40/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

1,e transport reuests to (e imported are client dependant+ so ,ave to (e imported into ever$ working clients.

ot 5odifia(leK %

,eck wit, SCC8transaction if t,e client settings are correct too.

5.6. Chec= the s"stem.

5.6.1. Chec=in7 CP? 'oa# an# /emor" ,a7in7.

5ake sure t,e P2 load is (elow !0R w,ile SAP is running wit, no user activit$.2se ST0on SAP and to,aon 2ni.

orrect S106 wit,out activit$%



41/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

orrect 1opaO wit,out activit$.

5ake sure t,e ,ost doesnt swap w,ile SAP is running wit, no user activit$.,eck configuration of eac, AS.5ake sure t,ere is enoug, work processes.

5.6.2. Chec= at ?ni e!e.

)s t,e 2)D of SAPS)D t,e same in all SAP :andscape.

g!serv%gvadm !0H iduidN*00-gvadm gidN*0!-saps$s groupsN*00-d(a+*0#-oper

leaning t,e SAP directories.

,eck t,e free space in t,e sap directories -e % "usr"sap"S)DH"D'?B5=S"work

,ecking t,e kernel release.

1,e patc, num(er


42/42

TECHNICAL PROCEDURE


Version 0.1a

WAS 6.40 ABAP

2se SSAA transactionto do a SAP glo(al c,eck.

Select administrative function and eecute.

pen t,e Irunning your -A. -ystemK folder and perform all t,e step -must (e succesfull

correct all errors if necessar$.

ecc post install steps

Documents