easyio-30p programmable sedona distributed controller · 2014-07-17 · easyio-fg32 cloud ready...
TRANSCRIPT
Product sheet CT2.130
Module Type EASYIO-30P
EASYIO-30P Programmable Sedona Distributed Controller
The EasyIO-30P (Sedona Distributed Controllers) controllers are robust, networkable, programmable controllers with high performance, multi-protocol support for large range of specific and generic applications. The controllers support BACnet IP, BACnet Ethernet, BACnet MS/TP, Modbus TCP/IP, Modbus RTU over Serial (RS-485) and Sedona SOX protocols. The controllers are fully programmable using either standard Sedona Workbench or Niagara AX Workbench.
Features
• Fully Programmable Controller using Industry’s First Open Framework; Sedona Framework
• 30 Built-In High Accuracy Inputs and Outputs; High Accuracy 14-Bit A/D Converter
• Multi Protocol Support; BACnet and Modbus over TCP/IP or Serial
• LED Indication for Input and Output Status
• DIN-Rail or Wall Mounting
• Supports Full Programming via "Wire Sheet" - Graphical Object Programming. Dynamic Memory Management for Optimised Performance.
• Remote Online Firmware Upgrades and Configuration
• Built-In Web-Browser Interface for Configuration Settings
• Seamless connection to EasyIO-30P-TS35 colour Touchscreen User Interface
Model Type Model Description
EasyIO-30P Programmable Sedona FrameworkTM Controller, 30 Inputs/Outputs
SED-WB-OS Sedona Workbench License
Technical Data Power Supply 24 VAC 3.6VA Max20..34VDC
Power Consumption 150mA max @ 24VDC
Universal Inputs 8 x Universal Measurement Inputs- Voltage 0..10V (+/-0.005V), 0..5V(+/-0.003V)- Current: 4..20mA (+/-0.01mA), 0..20mA (+/-0.01mA)- Resistance: 0..30kOhm (+/-10 Ohm), 0..10kOhm (+/-5 Ohm), 0..1.5kOhm (+/-1 Ohm)- Thermistor: NTC10K, Platinum 1000 (+/-0.01°C)
Digital Inputs 8 x Volt-Free Iputs; Max 5V at 500 Ohm Resistance
Analogue Outputs 4 x Analogue Outputs - 0..10Vdc; 0..20mA, 4..20mA (up to 800 Ohm load)
Relay Outputs 8 x Relays, 48V at 24VAC, SPST NO, Pilot Duty
Digital Outputs 2 x Triacs, max 1A 60V (Open Collector Output, Isolation 3.75kV)
Communication Port 1 - EIA-485 Two-Wire (BUS A and B RS485) Half Duplex- Data Speed: 9.6K,19.2K,38.4K,115.2K bit/s; 8 Data Bits, Parity None/Odd/Even- Application Protocol: Modbus RTU Serial, BACnet MS/TP
Communication Port 2 - Ethernet 10/100 Base-T- Ethernet Support: IP, TCP, UDP, ICMP, IGMP,FTP,HTTP- Application Protocol: BACnet IP, BACnet Ethernet, Modbus TCP and Sedona SOX
Operating Temp 0..65°C, max 95%rh non-condensing
Storage Temp -20..+65°C
Operating Humidity 10..95% rH non-condensing
Online store: www.syxthsense.com
Enquiries: T: 0844 840 3100 F: 0844 840 3200 PS CT2.130 - 1/5
SyxthSense Ltd
EasyIO-30P Controller Wiring Diagram
Please consult the below diagram for the wiring details.
EasyIO-30P
COM
IN1
1 C 2 C 3 C 4 C 5 C C
IN4
C 6 7
COM
IN5
COM
C8
IN2
COM
COM
IN3
IN6
COM
IN7
COM
IN8
COM
Universal Inputs
COM
IN1
1 2 C 3 4 C 5 6 C C
IN4
7 8
IN5
COM
IN2
COM
COM
IN3
IN6
COM
COM
Digital Inputs
N1 N2
1 1C 2 2C 3 3C 4 4C 5 6C 7C5C 6 7 8C8
Digital Outputs
1A 1B 2A 2B
Triac Outputs
COM
AO1
1 C 2 C 3 C 4
AO4
AO2
COM
COM
AO3
Analogue Outputs
C
COM
24C
24L
1 C A B
Rx-
Tx+
24VAC Bus
DIGITAL OUTPUT STATUS1 875 62 3 4
DIGITAL INPUT STATUS1 875 62 3 4
PWR COM COM
EX COM ERR
The EasyIO-30P Graphical Programming (Using Sedona Workbench or Niagara AX Workbench or CPT Tools)
The EasyIO-30P controllers are programmed using Sedona or Niagara AX Workbench (including CoachAX). The Sedona FrameworkTM allows free programming of the controllers, and the EasyIO-30P controllers come with extensive range of application object libraries (kits) as standard. The controllers can also be programmed using CPT Tool.
.
The Sedona or Niagara AX Workbenches allow graphical programming of the controllers. The image below illustrates how the controller programs are created linking graphical objects together. The standard EasyIO-30P controller libraries (kits) include all typical objects required for configuring the controllers to HVAC applications. The type of objects include:-
• Analogue/Digital Input and Analogue/Digital Output Objects
• Single and Multi-Stage PID Loop Control Objects
• Time and Holiday Schedule Objects
• Optimiser and Psychometric Chart Objects
• Logical Programming Objects (e.g. AND, OR, XOR, NOT)
• Analogue Programing Objects (e.g. Latches, Limiters, Sequencers)
• Min/Max, Counter and Timer Objects
Enclosure IP20, UL94 ABS
CE Approval EN61000-6-3: 2001 (Emissions)EN61000-6-2: 2001 (Immunity)
Mounting DIN-rail mounting
Terminals High quality spring-cage terminal blocks
Dimensions W187 x H110 x D47mm
Weight 400g
Copyright © 2014 SyxthSense Ltd. All rights reserved - 06/2014
PS CT2.130 - 2/5
Online store: www.syxthsense.com
Enquiries: T: 0844 840 3100 F: 0844 840 3200
SyxthSense Ltd
• Historical Trend Data Objects
• Email Transmission Objects
• Objects to Support Most Common Sensor Types (NTC10k4, Satchwell (10K Linearised), Land-ing and Staefa/Siemens Ni1000, Honeywell NTC20K and PT1000)
• NTP (Internet) Time Update Objects
• Modbus Slave Configuration Objects
• Modbus Master Configuration Objects
• BACnet Objects
• EasyIO-30P-TS35 Touchscreen Display Configuration Objects
• Mathematical objects (e.d. ArcCosine, ArcSine, Log, Log10, Power, Sine, Cosine)
• TCom Object Libarary Allowing Seamless Integration to JACE and HAWK and other Niagara
FrameworkTM based products
The object libararies are constantly enhanced and the flexible structure of Sedona FrameworkTM allows the controller objects libraries to been upgraded even after the installation should this be required.
Network Archictecture Examples
The EasyIO-30P controllers can operate as
• Modbus Slaves (over TCP/IP or RS-485)
• Modbus Master over RS485
• BACnet Server (over TCP/IP)
In addition EasyIO-30P controller TCOM driver allows seamless integration to JACE, HAWK and other Niagara Framework based devices. TCOM driver exposes all controller points to the master devices without any complex configuration.
Copyright © 2014 SyxthSense Ltd. All rights reserved - 06/2014
PS CT2.130 - 3/5
Online store: www.syxthsense.com
Enquiries: T: 0844 840 3100 F: 0844 840 3200
SyxthSense Ltd
Network Example 1: Modbus TCP/IP Slave and Modbus Master
The EasyIO-30P controller can simultaneously act as a Modbus TCP/IP Slave and a Modbus RS-485 Master. The diagram below illustrates the network architecture. The EasyIO-30P controller can currently support up to 8 Modbus Slave devices in the master mode.
EASYIO-FG32Cloud Ready HTML5ProgrammableController
HLS RoomControllers
FLTA
Wire
less
Inte
rfac
e
Wireless Humidity, Temperature, Pulse Meter, Wireless IO-Module etc.
Modbus RTU RS485
SRC-131Modbus HotelRoom Controller
FFFFFFF
ETHERNET COMMSBACnet IP, Modbus TCP
M-B
us M
eter
s
Energy Meters
WaterMeters
Ethernet / Internet / Intranet
Electricity Meters
EASYIO-30P 30-PointSedona Controller
DGBOX Web Interface Solution
MOD/M-BUSConverter
http://192.1.10.10/...
CDR
BACn
etCO
2 Se
nsor
s
BACn
et M
S/TP
EASY
IO-F
C20
BAC
net /
Mod
bus
Zon
e a
nd
Smal
l Pla
nt C
ontr
olle
r
Web-Browser Interface withFully Interactive ActiveGraphics
EASYIO-FG20Cloud Ready HTML5ProgrammableController
BAC-
IO
BACn
et IO
-M
odul
es
Network Example 2: Modbus RS-485 Slave
The EasyIO-30P controller can operate as a Modbus RS-485 slave. In this configuration up to 31 EasyIO-30P controllers can be connected to a Modbus Master device..
Modbus RTU - Max. 31 Slaves
EASYIO-30PCONTROLLER
EASYIO-FG-LCD3.5” LCD Touchscreen
Modbus Mastere.g. SCADA Softwareor Modbus Master Controller(e.g. FDX, WebBiter etc.)
ModbusRS-485
Network Example: Modbus RS-485 Slave Network
Ethernet
Network Example 3: BACnet/Tcom Server
The EasyIO-30P controller can act as a BACnet server. This allows easy connection to BACnet enabled BMS systems. The Tcom driver allows seamless integration to Niagara Framework based products e.g. Tridium JACE, Honeywell HAWK and Trend TONN. With the Tcom driver all controller points are exposed to NiagaraAX Workbench allowing the EasyIO-30P controller to form an integral part of the system. Tcom driver allows also historical data and schedule objects to be integrated to Niagara platform instead of using the standard BACnet mechanisms.
Modbus RTU - Max. 8 Slaves
TCP/IP
IntranetInternet
FLTAHLS34 SSTHLS44
TEU-FLKLU-FL
TEFL RY-FLLA-FL
HDH-M
PA-FL
EASYIO-30PCONTROLLER
EASYIO-FG-LCD3.5” LCD Touchscreen
TCP/HTTPTCP/SOX
Network Example: BACnet Server / TCom Integration
BACnet IPTCOM
Tridium JACE, Honeywell HAWK,Trend TONN
As the EasyIO-30P controller can still also act as a RS-485 Modbus master, the EasyIO-30P controller can in addition to the control, be used as a compact Modbus to BACnet gateway.
Copyright © 2014 SyxthSense Ltd. All rights reserved - 06/2014
PS CT2.130 - 4/5
Online store: www.syxthsense.com
Enquiries: T: 0844 840 3100 F: 0844 840 3200
SyxthSense Ltd
Notes: JACE, Sedona Framework and Niagara Framework are Trademarks of the Tridium Inc. In the view of a constant development of their products, the manufacturer reserves the right for changing technical data and features without prior notice. The consumer is guaranteed against any lack of conformity for 24 months from the time of delivery, according to the European Directive 1999/44/EC. The full text of guarantee is available on request from the seller.
Copyright © 2014 SyxthSense Ltd. All rights reserved - 06/2014
PS CT2.130 - 5/5
Online store: www.syxthsense.com
Enquiries: T: 0844 840 3100 F: 0844 840 3200