easter bracelet plans-how to make bracelets with beads
DESCRIPTION
Use some simple 10mm pearl beads and gauge wire from the craft store, you can rapidly learn how to make bracelets with beads under half an hour, especially to create an fabulous and festival Easter bracelet.TRANSCRIPT
Easter bracelet plans-how to make
bracelets with beads
Use some simple 10mm pearl beads and gauge wire from the craft store, you can rapidly learn how to make
bracelets with beads under half an hour, especially to create an fabulous and festival Easter bracelet.
Just in time for Easter. Make a significant vivid Easter
bracelet for yourself, your friend, families or anyone
other will love wearing handmade jewelry of a kind
of gift. While practicing by following this how to
make bracelets with beads plan, you will acquire
incredible customized Easter gifts and at meanwhile
go over the wire wrap techniques.
Stuff you’ll need in your Easter Bracelet:
10mm Acrylic Beads-Imitation Pearl
1mm Brass wire
Jumprings
Clasp
Side Cutting Plier
Round Nose Plier
Needle Nose Plier
Here’re details of how to make bracelets with beads:
Step1: make the fundamental
bead pattern
1. Snip about 12cm long wire and then slide
one 10mm pearl bead onto it;
2. Pull two wire ends crisscross over the
bead;
3. Bend one end to form a 90 degree;
4. Wrap the horizontal end around the vertical
one. Normally, 4 times is ok;
Step2: create the triangle pattern
1. Take out one more 12cm long wire and loop
one end for kind of Eyepin;
2. Slide on one 10mm pearl bead, the
fundamental bead pattern in step1 and then
one 10mm pearl bead;
3. Bend the wire into 90 degree;
4. Loop the other wire end and then process
the remaining wire in same way.
5. Remove the extra wire portion of wrapping
end;
6. Bend the vertical wire end outwards into a
90 degree again;
7. Create a loop at the bead top by Round
Nose Plier;
8. Wrap the remaining wire around 4 times
and finally trim off the sticking out wire
portion in same way.
At present, you crucial basic bead pattern for
the Easter bracelet has finished! Just repeat
the same processes for more of it.
5. Assemble each individual triangle bead
pattern for an Easter bracelet, just connect
the beginning and ending wire loops before
close them.
Step3: add on a closure for Easter bracelet
Once grouped all triangle clusters, attach the clasp
and Jumprings to two ends.
That’s it. Now you have obtained a new trinket around your wrist. Fell so proud of yourself?
However, that’s not enough. Just set your mind free and to branch out and try more bead
collocations you’d like to. Hope this how to make bracelets with beads institutions can help you
figure out more stunning and festival Easter bracelet, necklace, earrings……
For more stunning theme inspirations, please visit: www .pandahall.com/learning-center.html