E JEEP OPERATOR/ OWNER MANUAL

Make sure switch is OFF when not in use. Except charging- Switch needs to be on.

Table of Contents

1. Starting Up

2. Forward & Reverse

3. Air Conditioning & Heating

4. Lights

5. Radio/ Entertainment system

6. Charging

7. Storing

8. Troubleshooting

9. VIN

Starting

Make sure switch is ON before turning ignition key.

Forward & Reverse

R- Reverse N- Neutral D- Drive (forward) Turn the knob back and forth like a radio dial to switch gears. The gear you are in lights up. The picture shows the E Jeep in N-Neutral.

Air Conditioning & Heating

Turn the Temperature Dial (on the left) to the desired temperature. Turn the Fan Speed Dial (on the right) to the desired fan speed. 0 is off. 1 is the lowest setting 2 is the middle setting 3 is the highest setting.

Lights

Operates like a car- Blinkers – pull lever up for right down for left Lights- pull lever to you for lights push lever away for bright lights middle position is off Wipers- Turn lever like a radio know to turn wipers on- Push knob in and hold like a button to activate washer, release for off.

Radio/ Entertainment System

Menu button gets you home to this touch screen BT -is for your Blue Tooth phone connection Movie- Watch movies saved on your phone on screen Music- listen to music saved on your phone on the speakers in the E Jeep Explorer- connect and search internet MAPS or other apps (phone hotspot required)

Photo- view photos on your phone on screen

Charging

Step 1 Open “Gas” Cap on driver side Step 2 Plug Charger into small outlet on the Right. Step 3 Plug into the wall. *Make sure Start Switch from page 1 is turned ON

Storing

Make sure switch is OFF when not in use. Except charging- Switch needs to be on.

UNDER THE HOOD

Water for cooling system in the radiator (Left image) Water for windshield wipers (Right image) *Controllers are also found here as well

VIN