Fold out to get started

The spectrum device and TM are trade marks & ® are registered trade marks of Telstra Corporation Limited, ABN 33 051 775 556

You can get access to more help by using one of the following:

NEED MORE HELP?

telstra.com/helpcrowdsupport.telstra.com.auPhone 1800 834 273

Telstra Wi-Fi Maximiser™ App

Telstra 24x7® App

Getting online with the Telstra Gateway Max

01 Set up your Telstra Gateway Max02 Connect to the internet03 Connect your computer / devices04 Connect your phone05 Troubleshooting tips06 Managing your Gateway

OVERVIEW

Wi-Fi security card Power adapter

WIRELESSSECURITY CARD

WI-FISECURITY CARD

OKQdeò=t áJ cá=kÉí ï çêâ=k~ãÉW=qÉäë í ê~uuuuuuRdeò=t áJ cá=kÉí ï çêâ=k~ãÉW=qÉäë í ê~uuuuuuJ RdkÉí ï çêâ=hÉó=Et m̂ OFW=^^NN__OÒ `

WHAT’S IN THE BOX To set up the Gateway, make sure you have the following:● Telstra Gateway Max● Wi-Fi security card● Power adapter● 2 x Ethernet cable

Telstra Gateway Max

Telstra Gateway Max™

QUICK START GUIDE

05 TROUBLESHOOTING TIPSConnecting to your Gateway If you are having trouble connecting to your Gateway, make sure that:

• You double check that all cables and cords are firmly attached to your Gateway and NBN Connection Box

• The power adapter from the kit is connected and the Gateway and NBN Connection Box are both turned on.

If you still have trouble, try restarting your Gateway and computer/device by turning them off. Wait 10 seconds, before turning them on again.

If you hear a busy dial tone or there is no dial tone Turn the Gateway off, wait 10 seconds and then power it on. Allow up to 3 minutes for the Voice light to turn green and check again for a dial tone.

Can’t find your Telstra Broadband password?Go to www.telstra.com.au/password to retrieve or reset your password.

Advanced troubleshootingFurther troubleshooting tips for your NBN connection box and your Gateway can be found in the included NBN Guide.

Still need help?

If you are having problems connecting after trying the above steps you can choose to contact your Case Manager on the direct number they have provided, or alternatively, you can contact us on 1800 834 273.

Using the Gateway control panelUse the Gateway control panel to manage and customise your Gateway settings. The control panel can be accessed from any device connected to the Gateway. To access the Gateway control panel:

1. Open a web browser on your computer/device.

2. Enter the URL telstra.gateway/ or enter http://10.0.0.138 to your browser.

Useful control panel functions:• Use Parental Control to protect children from inappropriate content,

and restrict internet usage.

• Go to Wi-Fi to change your Wi-Fi Network Name and Network Key.

Online toolsTo download tools to assist with managing your service online, please go to www.telstra.com/welcome.

06 MANAGING YOUR GATEWAY

If you need extra cabling If you require help with extra cabling or you would like phone sockets on your wall to be connected to the NBN, you can book an appointment with a Telstra technician by calling 1800 834 273. Charges may apply.

Ethernet cable x 2

PR799QGTE2-N QSG_Telstra Gateway Max 12pp.indd 19/12/15 7:25 AM

CONNECTING YOUR GATEWAY MAX TO THE NBN

PSTN DSL 1 2 3 4 WANR ESET1 2

Power

2

3

NBN Connection Box(Connect to Ethernet port)

Computer

4 Phone

Plug phone into green

socket

Power Switch

1

PSTN DSL 1 2 3 4 WANR ESET1 2

Wi-FiYour new Network Name and password (Network Key) can be found on the Wi-Fi Security Card provided, and on the back of the Gateway.

1. Turn Wi-Fi on your computer or device (your Wi-Fi settings may be different for each device).

2. Select the Wi-Fi Network Name on your card from the list on your device, or enter the Network Name if you do not see it on the list (Note: Connect your device to the 2.4GHz Network Name).

3. Enter the password (Network Key) when prompted to connect via Wi-Fi.

4. The Wi-Fi 1 or Wi-Fi 2 light on your Gateway should turngreen to show you have connected viaWi-Fi.

Ethernet1. Connect the Ethernet

cables with yellow ends to a yellow LAN port on the back of your Gateway.

2. Connect the other end of the cable to an Ethernet port on your computer.

3. The Ethernet light on your Gateway will go green to show you have successfully connected via Ethernet.

4. Note: If your home is smart wired or has a patch panel, you may be able use that cabling to connect your Gateway and computer even if they are in different locations.

Your Gateway allows you to connect your devices to the internet, through a Wi-Fi or an Ethernet network connection. (Ethernet will give you the fastest speeds) Make sure you unplug any modems you have been using.

03 CONNECT YOUR OR

1. Check that the Voice light is green on your Gateway.2. Disconnect your existing phone from the wall socket.3. Grab one of the supplied grey phone cables and connect it

to the green socket at the back of your Gateway.4. Connect the other end to your phone.5. If you are bringing across a Telstra home number to the

NBN, it will take around 10 minutes before you will be able to receive calls via that number (please do not use your phone during this time).

6. Check that your phone now has a dial tone. You are now ready to make calls!

04 CONNECT YOUR PHONE

Ensure your NBN Connection Box has been installed by NBN Co before setting up your Gateway. It may take NBN Co up to 24 hours to activate the Connection Box and for its Link, Online, US DS and Power lights to go green.

1. Connect the power adapter to the Gateway and power point.2. Turn on the Gateway by pressing the power button on the back.3. Allow a few minutes for the Gateway to power on.4. Check that the Internet light is solid red before proceeding.

01 POWER UP YOUR GATEWAY

02 GET THE NBN RUNNING1. Connect the Ethernet cable with the red end to the red WAN port on the

back of the Gateway.2. On the NBN Connection box connect the other end of the Ethernet

cable to the yellow Ethernet port. 3. Ensure the NBN Connection box is switched on (wait for up to 90 seconds)

7.

and check that all indicators lights (Link, Online, US, DS & Power) are on.4. Check the WAN and Internet lights on the front of the Gateway are

solid green before proceeding.

To check you’re online and connected, open you your browser and go to www.telstra.com/welcome

WI-FISECURITY CARD

OKQdeò=t áJ cá=kÉí ï çêâ=k~ãÉW=qÉäë í ê~uuuuuuRdeò=t áJ cá=kÉí ï çêâ=k~ãÉW=qÉäë í ê~uuuuuuJ RdkÉí ï çêâ=hÉó=Et m̂ OFW=^^NN__OÒ `

DEC 15

PR799QGTE2-N QSG_Telstra Gateway Max 12pp.indd 29/12/15 7:25 AM

If you have an old Cable modem ensure you unplug and remove it and where possible ensure the NBN Connection Box is connected directly to the wall socket by removing any 2 or 3 way splitters that are no longer required. An image of a splitter has been provided for your reference.

YOU'RE DONE