È - bureau of indian standardsbis.org.in/sf/pow/powlitd.pdf · 35()$&( $ surjudpph ri zrun lv...

of 147 /147
(एलआईटȣडी/ LITD) काय[ योजना (15 अÈत बर 2016 तक) PROGRAMME OF WORK (AS ON 15 October 2016) इलैÈĚॉǓनकȧ एवं स चना Ĥौɮयोगकȧ वभाग (एलआईटȣडी) ELECTRONICS AND INFORMATION TECHNOLOGY DEPARTMENT (LITD) भारतीय मानक Þय रो मानक भवन, 9 बहाद र शाह ज़फर माग[ नई Ǒदãलȣ 110 002 BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

Author: lekhanh

Post on 26-Aug-2018

214 views

Category:

Documents


0 download

Embed Size (px)

TRANSCRIPT

  • ( / LITD)

    (15 2016 )

    PROGRAMME OF WORK (AS ON 15 October 2016)

    ( )

    ELECTRONICS AND INFORMATION TECHNOLOGY DEPARTMENT

    (LITD)

    , 9 110 002

    BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

  • PREFACE

    A programme of work is prepared every year for each Division of Bureau of Indian Standards to

    indicate the latest position of published Indian Standards and draft standards at different stages of

    processing. This Programme of Work for Electronics and Information Technology Division

    Council (LITDC) has been prepared Sectional Committee-wise as on 1 June 2013 and arranged in

    the sequential order of the Committee Number.

    The scope of LITDC is as under:

    Standardization in the field of Electronics and Information Technology (IT)

    including Information & Communication Technologies (ICT)

    In the programme of work an asterisk mark (*) given before a printed standard indicates that the

    standard is under revision and its relevant document is available at different stages of processing;

    whereas, double asterisk mark (**) indicates standard identified for revision for which document

    is yet to be prepared. Below the designation of a published standard, wherever `/ISO/IEC.......

    standard number is given, it implies that the Indian Standard is the total adoption of ISO/IEC

    standard under dual numbering scheme. (The designations such as IS/ISO 9001:2008 also indicate

    dual number standards). Below the designation of a published standard, wherever `| ISO/IEC........

    standard number is given, it implies that the Indian Standard is technically equivalent to ISO/IEC

    standard.

    It is hoped that this publication will provide the community of standards users a convenient tool

    for obtaining the latest information about new and upcoming standards in the field of Electronics

    and Information Technology.

    For further information, please write to:

    Head (Electronics and Information Technology)

    Bureau of Indian Standards

    Manak Bhavan,

    9 Bahadur Shah Zafar Marg

    New Delhi - 110002.

    E-mail: [email protected]

    [email protected]

    (i)

  • C O N T E N T S

    COMMITTEE WISE POSITION OF WORK OF ELECTRONICS AND INFORMATION TECHNOLOGY DIVISION COUNCIL (LITDC)

    SL. DESIGNATION TITLE: (CORRESPONDING IEC/ISO TC/SC) PAGE NO. NO. 1. LITD 01 ENVIRONMENTAL CONDITIONS TESTING PROCEDURES 1-6 FOR ELECTRONIC PRODUCTS SECTIONAL COMMITTEE : IEC/TC 89 &104 2. LITD 02 RELIABILITY OF ELECTRONIC AND 7-10 ELECTRICAL COMPONENTS AND EQUIPMENT SECTIONAL COMMITTEE : IEC/TC 56 3. LITD 03 ELECTROMECHANICAL COMPONENTS AND 11-19 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT SECTIONAL COMMITTEE: IEC/TC 48 IEC/SC 48B , 48D & 46F 4. LITD 04 ELECTRON TUBES AND DISPLAY DEVICES 20-23 SECTIONAL COMMITTEE : IEC/TC 110 5. LITD 05 SEMICONDUCTOR DEVICES COMPONENTS AND ELECTRONIC ASSEMBLY TECHNOLOGY 24-37 SECTIONAL COMMITTEE: IEC/TC 40, 47 & 91 IEC/SC 47A,47D, 47E & 47F 6. LITD 06 WIRES, CABLES, WAVEGUIDES AND 38-44 ACCESSORIES SECTIONAL COMMITTEE: IEC/TC 46, IEC/SC 46A,46C & 46F 7. LITD 07 AUDIO, VIDEO AND MULTIMEDIA SYSTEMS 45-55 AND EQUIPMENT SECTIONAL COMMITTEE : IEC/TC 29, 100 & 108, ISO/TC 43/SC 1 Noise 8. LITD 08 ELECTRONIC MEASURING INSTRUMENTS, 56-62 SYSTEMS AND ACCESSORIES: IEC/TC 85 & 45, IEC/SC 45A & 45B, ISO/TC 85,ISO/TC 85/ SC 2 & 5 9. LITD 09 ELECTROMAGNETIC COMPATIBILITY 63-68 SECTIONAL COMMITTEE : IEC/TC 106 & 77 IEC/SC 77A, 77B & 77C, CISPR

    (ii)

  • SL. DESIGNATION TITLE: (CORRESPONDING IEC/ISO TC/SC) PAGE NO. NO. 10. LITD 10 POWER SYSTEM CONTROL AND 69-72 ASSOCIATED COMMUNICATIONS SECTIONAL COMMITTEE: IEC/TC 57 & 118 11. LITD 11 FIBRE OPTICS, FIBERS, CABLES AND DEVICES 73-77 SECTIONAL COMMITTEE : IEC/TC 86,SC 86A, 86B & 86C 12. LITD 12 TRANSMITTING EQUIPMENT FOR RADIO 78-80 COMMUNICATION SECTIONAL COMMITTEE: IEC/TC 103 13. LITD 13 INFORMATION AND COMMUNICATION 81-84 TECHNOLOGIES SECTIONAL COMMITTEE: ISO/IEC/JTC 1/SC 6, 25 & 35 14. LITD 14 SOFTWARE AND SYSTEM ENGINEERING 85-88 SECTIONAL COMMITTEE: ISO/IEC/JTC1/SC 7 & 38 15. LITD 15 DATA MANAGEMENT, DOCUMENT PROCESSING 89-90 AND PROGRAMMING LANGUAGES SECTIONAL COMMITTEE:ISO/IEC/JTC1/SC 22, 32 & 34 16. LITD 16 COMPUTER HARDWARE, PERIPHERALS AND 91-96 IDENTIFICATION CARDS SECTIONAL COMMITTEE : IEC/TC 108, ISO/IEC/JTC1/SC 17, 23, 28 & 31 17. LITD 17 INFORMATION SYSTEMS SECURITY 97-101 AND BIOMETRICS SECTIONAL COMMITTEE: JTC1/SC 27 & 37 18. LITD 18 E-GOVERNANCE SECTIONAL COMMITTEE 102 19. LITD 19 E-LEARNING SECTIONAL COMMITTEE 103-104 JTC1/SC 36, ISO/TC 232 20. LITD 20 INDIAN LANGUAGE TECHNOLOGIES AND 105 PRODUCTS SECTIONAL COMMITTEE: ISO/IEC/JTC1/SC 2

    (iii)

  • SL. DESIGNATION TITLE: (CORRESPONDING IEC/ISO TC/SC) PAGE NO. NO. 21. LITD 22 GEOSPATIAL INFORMATION SECTIONAL 106-107 COMMITTEE : ISO/TC 211 22 LITD 23 CODING AND PROCESSING OF AUDIO, PICTURE, 108 MULTIMEDIA AND HYPERMEDIA INFORMATION SECTIONAL COMMITTEE: ISO/IEC/JTC1/SC 24 & 29 23 LITD 24 MAGNETIC COMPONENTS,FERRITE MATERIALS, 109-120 PIEZOELECTRIC AND FREQUENCY CONTROL DEVICES SECTIONAL COMMITTEE : IEC/TC 49 & 51 24 LITD 25 SOFTWARE SYSTEMS AND APPLICATIONS SECTIONAL 121 COMMITTEE 25 LITD 26 ALARMS AND ELCTRONIC SECURITY SYSTEMS SECTIONAL 122 COMMITTEE : IEC/TC79 26. ANNEX A STANDARDS WITHDRAWN/SUPERSEDED 123-136 27. ANNEX B LIST OF LICENCES 137 28 ANNEX C BILINGUAL STANDARDS 138 29 ANNEX D INDIAS MEMBERSHIP STATUS IN THE IEC/ISO TC/SCS 139-141

    (iv)

  • STATISTICS AT A GLANCE

    ASPECTWISE POSITION OF STANDARDS ASPECT OFSTANDARD NUMBER OF STANDARDS PRODUCT 536 METHODS OF TEST 318 CODES OF PRACTICES 145 TERMINOLOGY 76 DIMENSIONS 74 SYMBOLS 18 OTHERS 355

    TOTAL : 1522

    HARMONIZATION POSITION

    TYPEOF HARMONIZATION NUMBER OF STANDARDS

    IS UNDER DUAL NO. : 469

    IS TECHNICALLY EQUIVALENT TO : 547

    IEC/ISO

    TOTAL : 1016

    (v)

  • LITD 1 ENVIRONMENTAL CONDITIONS TESTING PROCEDURES FOR ELECTRONIC PRODUCTS SCOPE To prepare Indian Standards on testing procedure for electronic components and equipments under different environmental conditions LIAISON WITH IEC COMMITTEES IEC/TC 89 Fire Hazard Testing IEC/TC 104 Environmental conditions, classification and methods of testing Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

    1 IS 1885(Part 84):2008 Electrotechnical vocabulary Part 84: Terminology 2015 concerning fire tests for electronical products (First / IEC 60695-4(2005) Revision) 2 IS 9000(Part 1):1988 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 1 General (first revision) | IEC 60068-1:1982 3 IS 9000(Pt 2/Sec 01to 4):1977 Basic environmental testing procdures for electronic Oct 2013 and electrical items: Part 2 Cold test, :Sec 1 to4 | IEC 60068-2-1(1974) 4 IS 9000(Pt 3/Sec 01to 05):1977 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 3 Dry heat test, Sec 1 to 5

    | IEC 60068-2-2(1974) 5 IS 9000(Part 4):2008 Basic environmental testing procedures for electronic Sep 2014 and electrical items: Part 4 Damp heat (steady state) | IEC 60068-2-78(2001) (First Revision) 6 IS 9000(Pt 5/Sec 01 & 02):1981 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 5 Damp heat (cyclic) test, Sec 1 & 2 | IEC 60068-2-30(1980) 7 IS 9000(Part 6):1978 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 6 Composite | IEC 60068-2-38(1974) temperature/humidity cyclic test 8 IS 9000(Pt 7/Sec 01 to 05):2006 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 7 Impact test Section 1 to 5

    / IEC 60068-2-27(1987) 9 IS 9000(Part 7/Sec 6):1988 Basic environmental testing procedures for electronic Jan 2015 and electrical items: Part 7 Impact test, Section 6 Test | IEC 60068-2-55(1987) Ee: Bounce 10 IS 9000(Part 7/Sec 7):2006 Basic environmental tersting procedures for electronic Oct 2013 and electrical items: Part 7: Test Impact ,Sec 7 Test / IEC 60068-2-75(1997) Eh: Hammer tests 11 IS 9000(Part 8):1981 Basic environmental testing procedures for electronic Jan 2015 and electrical items: Part 8 Vibration (sinusoidal) test | IEC 60068-2-6(1970) 12 IS 9000(Part 9):1984 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 9 Acceleration (steady state) | IEC 60068-2-7(1968) 13 IS 9000(Part 10):1979 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 10 Mould growth test | IEC 60068-2-10(1968) 14 IS 9000(Part 11):1983 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 11 Salt mist test | IEC 60068-2-11(1964)

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

  • 15 IS 9000(Part 12):1981 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 12 Dust test | JSS-55555(1977) 16 IS 9000(Part 13):1981 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 13 Low air pressure test | IEC 60068-2-13(1966) 17 IS 9000(Part 14/Sec 01to Basic environmental testing procedures for electronic Jan 2015 03):1988 and electrical items: Part 14 Test N:Change of temp., Sec 1 To 3 | IEC 60068-2-14(1984) 18 IS 9000(Part 15/Sec 01to Basic environmental testing procedures for electronic Oct 2013 09):1982 and electrical items: Part 15 Sealing test, Sec 1 to 9 | IEC 60068-2-17(1978) 19 IS 9000(Part 16):1983 Basic environmental testing procedures for electronic Oct 2013 and electrical items : Part 16 Driving rain test | JSS-55555(1977) 20 IS 9000(Part 17):1985 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 17 Radiation test (first | IEC 60068-2-5(1975) 21 IS 9000(Part 18/Sec 01 to Basic environmental testing procedures for electronic Jan 2015 1 03):191981 and electrical items:Part18 Solderability test, Sec 1 to 3 | IEC 60068-2-20(1979) 22 IS 9000(Part 19/Sec 01to Basic environmental testing procedures for electronic Oct 2013 05):191986 and electrical items: Part 19 Test U: Robustness of terminations and integral mounting devices, Sec 1 To 5 | IEC 60068-2-21(1983) 23 IS 9000(Part 20):1979 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 20 Resistance to cleaning | IEC Doc 50 C(CO)19 solvents and permanence of markings 24 IS 9000(Part 21):1985 Basic environmental testing procedures for electronic Oct 2013 & electrical items: Part 21 Acoustics noise test | JSS-55555-1977 25 IS 9000(Part 22):1983 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 22 Fine mist test | JSS-55555-1977 26 IS 9000(Part 23):1984 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 23 Drip proof test | JSS-55555(1977) 27 IS 9000(Part 25):1980 Basic environmental testing procedures for electronic Jan 2015 and electrical items: Part 25 Hydrogen sulphide test | IEC 60068-2-43(1976) for contacts and connections 28 IS 9000(Part 26):1980 Basic environmental testing procedures for electronic & Jan 2015 electrical items: Part 26 Sulphur dioxide test for | IEC 60068-2-42(1976) contacts and connections 29 IS 9000(Part 27):1986 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 27 Ultrasonic cleaning test | IEC 60653(1979) 30 IS 9000(Part 31):1978 Basic environmental testing procedures for electronic Oct 2013 and electrical items: Part 31 Combined cold/low air | IEC 60068-2-40(1976) pressure tests 31 IS 9000(Part 32):2006 Basic environmental testing procedures for electronics Oct 2013 and electrical items Part 32: Information for / IEC 60068-4(1987) specification writers- Test summaries 32 IS 9001(Part 1):1984 Guidance for environmental testing: Part 1 General Oct 2013 | IEC 60068-1(1982)

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 2 -

  • 33 IS 9001(Part 2):1977 Guidance for environmental testing:Part 2 Cold and dry Oct 2013 heat tests | IEC 60068-3-1(1974) 34 IS 9001(Part 3):1978 Guidance for environmental testing: Part 3 Change of Oct 2013 temperature | IEC 60068-2-33(1971) 35 IS 9001(Part 4):1979 Guidance for environmental testing: Part 4 Damp heat Oct 2013 tests | IEC 60068-2-28 36 IS 9001(Part 5):1979 Guidance for environmental testing: Part 5 Resistance Oct 2013 to cleaning solvents and permanence of markings | IEC Doc 50C (co) 19 37 IS 9001(Part 6):1980 Guidance for environmental testing: Part 6 Hydrogen Oct 2013 sulphide test for contacts and connections | IEC 60068-2-43 38 IS 9001(Part 7):1980 Guidance for environmental testing: Part 7 Sulphur Oct 2013 dioxide test for contacts and connections | IEC 60068-2-42 39 IS 9001(Part 8):1982 Guidance for environmental testing: Part 8 Sealing test Oct 2013 | IEC 60068-2-17(1978) 40 IS 9001(Part 9):1981 Guidance for environmental testing: Part 9 Solderability Jan 2015 and resistance to soldering heat | IEC 60068-2-20(1979) 41 IS 9001(Part 10):1975 Guidance for environmental testing: Part 10 Mould Oct 2013 growth test | IEC 60068-2-10(1968) 42 IS 9001(Part 11):1973 Guidance for environmental testing: Part 11 Solar Oct 2013 2 radiation test | IEC Doc 50 (co) 171 43 IS 9001(Part 12):1979 Guidance for environmental testing: Part 12 Mounting Oct 2013 1 of electronic and electrical items for dynamic tests | IEC Doc50A (co) 141 44 IS 9001(Part 13):1981 Guidance for environmental testing: Part 13 Vibration Jan 2015 (sinusoidal) test | IEC 60068-2-6(1970) 45 IS 9001(Part 14):1981 Guidance for environmental testing: Part 14 Storage Jan 2015 | IEC Doc50B (co) 222 46 IS 9001(Part 15):1984 Guidance for environmental testing: Part 15 Oct 2013 Acceleration (steady state) test | IEC 60068-2-7(1968) 47 IS 9001(Part 16):1985 Guidance for environmental testing: Part 16 Acoustic Oct 2013 noise test | JSS-55555-1977 48 IS 9001(Part 17/Sec 01to Guidance for environmental testing: Part 17 Impact Oct 2013 04):192000 test, Sec 1 to 4 | IEC 60068-2-27(1987) 49 IS 9001(Part 17/Sec 5):1988 Guidance for environmental testing: Part 17 Impact Oct 2013 test, Sec 5 Bounce | IEC 60068-2-55(1987) 50 IS 9001(Part 18):1986 Guidance for environmental testing: Part 18 Ultrasonic Oct 2013 cleaning test | IEC 60653(1979) 51 IS 9001(Part 19):2006 Guidance for environmental testing: Part 19 Salt mist Oct 2013

    52 IS 9001(Part 20):2010 Guidance for Environmental Testing - Part 20 : Sep 2014 Calculation of uncertainty of conditions in climatic test / IEC 60068-3-11(2007) chambers * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 3 -

  • 53 IS 9002(Part 1):1977 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 1 Chamber for cold test

    54 IS 9002(Part 2):1977 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 2 Chamber for dry heat test

    55 IS 9002(Part 3):1979 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 3 humidity chamber

    56 IS 9002(Part 4):1979 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 4 Chamber for mould growth test

    57 IS 9002(Part 5):1979 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 5 Equipment for vibration (sinusoidal) test 58 IS 9002(Part 6):1980 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 6 Constant relative humidity | IEC 60260(1968) chamber (non-injection type) 59 IS 9002(Part 7):1983 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 7 Bump test machine

    60 IS 9002(Part 8):1984 Equipment for environmental tests for electronic and Oct 2013 1 electrical items: Part 8 Dust chamber

    61 IS 9002(Part 9):1984 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 9 Acceleration (steady state) test machine 62 IS 9002(Part 10/Sec 1):1985 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 10 Shock test machine,Sec 1 Free fall type 63 IS 9002(Part 11):1984 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 11 Drop/toppling and free fall test machine (platform) 64 IS 9002(Part 12):1986 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 12 Salt mist/fine mist chamber

    65 IS 9002(Part 13/Sec 1):1985 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 13 Equipment for change of temperature test, Sec 1 Two chamber system 66 IS 9002(Part 13/Sec 3):1985 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 13 Equipment for change of temperature test, Sec 3 Two baths 67 IS 9002(Part 14):1985 Equipment for environmental tests for electronic and Oct 2013 electrical items: Part 14 Low air pressure chamber

    68 IS 9002(Part 15):1988 Equipment for environmental tests for electronic and Jan 2015 electrical items: Part 15 Low air pressure and temperature chamber 69 IS 11000(Part 1/Sec 1):1988 Fire hazard testing: Part 1 Guidance for the preparation Jan 2015 of requirements and test specifications for assessing | IEC 60695-1-1(1982) fire hazard of electronic and electrical items, Sec 1 General guidance 70 IS 11000(Part 1/Sec 2):1988 Fire hazard testing : Part 1 Guidance for the preparation Jan 2015 of requirements and test specifications for assessing | IEC 60695-1-2(1982) fire hazard of electronic and electrical items,Sec 2 Guidance for electronic components

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 4 -

  • 71 IS 11000(Part 1/Sec 3):1993 Fire hazard testing: Part 1 Guidance for the preparation Jan 2015 of requirements and test specifications for assessing / IEC 60695-1-3:1986 fire hazard of electronic and electrical items, Section 3 Guidance for use of preselection procedures 72 IS 11000(Part 2/Sec 1):2008 Fire hazard testing: Part 2 Test methods - Sec 1 Glow- Sep 2014 wire apparatus and common test procedure (First / IEC60695-2-10:2000 Revision) 73 IS 11000(Part 2/Sec 2):2008 Fire hazard testing: Part 2 Test methods, Sec 2 Needle- Sep 2014 Flame Test-Method - Apparatus, Confirmatory Test / IEC 60695-11-5:2004 Arrangement and Guidance (First Revision) 74 IS 11000(Part 2/Sec 3):1994 Fire hazard testing: Part 2 Test methods, Sec 3 Bad- Jan 2015 connection test with heaters / IEC 60695-2-3:1984 75 IS 11000(Part 3/Sec 1):1993 Fire hazard testing: Part 3 Examples of fire hazard Jan 2015 assessment procedures and interpretaton of results, / IEC 60695-3-1:1982 Sec 1 Combustion characteristics and survey of test methods for their determination 76 IS 13736(Part 1):1993 Classification of environmental conditions: Part 1 Jan 2015 2 Classification of environmental parameters and their / IEC 60721-1(1990) severities 77 IS 13736(Part 2/Sec 1):1993 Classification of environmental conditions: Part 2 Jan 2015 Environmental conditions appearing in nature, Sec 1 / IEC 60721-2-1:1982 Temperature and humidity 78 IS 13736(Part 2/Sec 2):1993 Classification of environmental conditions:Part 2 Jan 2015 Environmental condition appearing in nature, Sec 2 / IEC 60721-2-2:1988 Precipitation and wind 79 IS 13736(Part 2/Sec 3):1993 Classification of environmental conditions:Part 2 Jan 2015 Environmental conditions appearing in nature, Sec 3 Air / IEC 60721-2-3:1987 pressure 80 IS 13736(Part 2/Sec 4):1993 Classification of environmental conditions, Part 2 Jan 2015 Environmental conditions appearing in nature, Sec 4 / IEC 60721-2-4:1987 Solar radiation and temperature 81 IS 13736(Part 2/Sec 7):1993 Classification of environmental conditions:Part 2 Jan 2015 Environmental conditions appearing in nature, Sec 7 / IEC 60721-2-7:1987 Fauna and flora 82 IS 13736(Part 3):1993 Classification of environmental conditions: Part 3 Jan 2015 Classification of groups of environmental parameters / IEC 60721-3-0:1984 and their severities, Sec 0 Introduction 83 IS 13736(Part 3/Sec 1):1993 Classification of environmental conditions : Part 3 Jan 2015 Classification of groups ofenvironmental parameters / IEC 60721-3-1:1987 and their severities, Sec 1 to 7. FINALISED DRAFTS UNDER PRINT

    1 DOC.LITD 1(3291) Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electro technical products - Insulating / IEC /TS 60695-1-40 (2002) liquids 2 DOC.LITD 1(3435) Classification of environmental conditions Part 1 Classification of environmental parameters and / IEC 60721-1:1990 their severities DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

    1 DOC.LITD 1(3434) Classification of environmental conditions Part 2 Environmental condition appearing in nature / IEC 60721-2-2:2012 Section 2 Precipitation And Wind 2 DOC.LITD 1(3545) Environmental Testing Part 2-31: TestsTest EC : Rough Handling shocks, / IEC /TS 60068-2-31:2008 Primarily for equipment - Type specimens

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 5 -

  • 3 DOC.LITD 1(3546) Fire hazard testing Part 2-11: glowing/hot-wire based test methods glow- / IEC /TS 60068-2-11:2014 wire flammability test method for end-products 4 DOC.LITD 1(3547) Fire hazard testing Part 2-12: Glowing/hot-wire based test methods Glow- / IEC /TS 60068-2-12:2014 Wire Flammability Index (GWFT) test method for materials 5 DOC.LITD 1(3548) Fire hazard testing Part 2-13: Glowing/hot-wire based test methods Glow- / IEC /TS 60068-2-13:2014 wire ignition temperature (GWIT) test method for materials 6 DOC.LITD 1(3549) Fire hazard testing Part 10-2: Abnormal heat Ball pressure test method / IEC /TS 60068-10-2:2014 7 DOC.LITD 1(3550) Fire hazard testing Part 11-10: Test flames 50 w horizontal and vertical / IEC /TS 60068-11-10:2013 flame test methods 8 DOC.LITD 1(3439) Basic environmental testing procedures for electronic and electrical items / IEC 60068-2-27 : 2008 Part 7 Impact test Section 1 ( Shock ) ( Test Ea )(Second Revision) 9 IS 1885(Part 84/Sec 1):2008 Electrotechnical vocabulary Part 84: Terminology concerning fire tests for / IEC 60695-4-2012 electronical products (First Revision) 10 IS 9000(Part 7/Sec 3):2000 Basic environmental testing procedures for electronic and electrical items / IEC 60068-2-31:2008 Part 7 Impact test Sec 3 Drop and topple 11 IS 11000(Part 1/Sec 3):2000 Fire hazard testing Part 1 Guidance for the preparation of requirements and / IEC 60695-1-3:2008 test specifications for assessing fire hazard of electronic and electrical items Section 3 Guidance for use of preselection procedures 12 IS 11000(Part 2/Sec 1):2000 Fire hazard testing Part 2 Test methods / IEC 60695-2-10:2000 Sec 1 Glowire apparatus and common test procedure ASPECT WISE REPORT PRODUCT 16 METHODS OF TEST 39 CODES OF PRACTICES 21 TERMINOLOGY 1 OTHERS 5

    TOTAL : 82

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 6 -

  • LITD 2 RELIABILITY OF ELECTRONIC AND ELECTRICAL COMPONENTS AND EQUIPMENT SCOPE Standardization in the field of availability, reliability,maintainability and maintenance support for electronic components and products LIAISON WITH IEC COMMITTEES IEC/TC 56 Dependability Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

    1 ** IS 1885(Part 39):1999 Electrotechnical vocabulary: Part 39 Reliability of Jun 2016 electronic and electrical items (Second revision)

    2 IS 7354(Part 1):1975 Guide on reliability of electronic and electrical items: Jun 2016 Part 1 Preliminary reliability considerations | IEC 60272:1968 3 ** IS 7354(Part 2):1984 Guide on reliability of electronic and electrical items: Jun 2016 Part 2 Reliability and maintainability management (First | IEC 60300 revision) 4 IS 7354(Part 3):2011 Guide on reliability of electronic and electrical items: Nov 2014 Part 3 Presentation and specification of reliability data / IEC 60319(1999) for electronic components (Second Revision) 5 ** IS 7354(Part 4):1974 Guide on reliability of electronic and electrical items: Jun 2016 Part 4 Collection of reliability,availability and | IEC 60362:1971 maintainability data from field performance 6 IS 7354(Part 5):1975 Guide on reliability of electronic and electrical items: Jun 2016 Part 5 Inclusion of lot-by-lot and periodic inspection | IEC 60419:1973 procedures in specifications for electronic and electrical components (or parts) (First revision) 7 IS 7354(Part 6):1983 Guide on reliability of electronic and electrical items: Jun 2016 Part 6 Inclusion of reliability clauses into specifications | IEC 60409 for components (or parts) (First revision) 8 IS 7690:1975 Mathematical guide to the terms and definitions for Jun 2016 1 reliability of electronic equipment and components (or | IEC 60271:1974 parts) used therein 9 ** IS 8161(Part 1):1999 Guide for equipment reliability testing: Part 1 Principles Jun 2016 and procedures (First revision) | IEC 60605-1(1978) 10 IS 8161(Part 2):1986 Guide for equipment reliability testing: Part 2 Design of Jun 2016 test cycles | IEC 60605-2 11 IS 8161(Part 3/Sec 1):1986 Guide for equipment reliability testing: Part 3 Preferred Jun 2016 test conditions for equipment reliability testing, Sec 1 | IEC 60605-3 Indoor portable equipment (low degree of simulation) 12 IS 8161(Part 3/Sec 2):1986 Guide for equipment reliability testing: Part 3 Preferred Jun 2016 test conditions for equipment reliability testing, Sec 2 | IEC 60605-3 Equipment for stationary use in weather protected locations (high degree of simulation) 13 IS 8161(Part 4):1985 Guide for equipment reliability testing: Part 4 Procedure Jun 2016 for determining point estimates and confidence limits | IEC 60605-4 from equipment reliability determination tests 14 IS 8161(Part 5):2011 Guide for equipment reliability testing: Part 5 Jun 2016 Compliance test plans for success ratio (First / IEC 61123(1991)

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 7 -

  • 15 IS 8161(Part 6/Sec 1):1983 Guide for equipment reliability testing : Part 6 Tests for Jun 2016 1 validity of a constant failure rate assumption, Sec 1 | IEC 60605-6(1997) Chi-square test 16 IS 8161(Part 6/Sec 2):1987 Guide for equipment reliability testing: Part 6 Tests for Jun 2016 validity of a constant failure rate assumption, Sec 2 | IEC 60605-6(1997) Kolmogorov-smirnov test 17 IS 8161(Part 7):2012 Guide for equipment reliability testing : Part 7 Jun 2016 Compliance tests for constant failure rate and constant / IEC 61124(2006) failure intensity (First Revision) 18 IS 8161(Part 11):1983 Guide for equipment reliability testing: Part 11 Flow Jun 2016 chart describing preparations for and execution of | IEC 60605-11 reliability tests 19 IS 9185(Part 1):1979 Endurance (life) test for electronic and electrical Jun 2016 components: Part 1 Thermal endurance

    20 IS 9185(Part 2):1979 Endurance (life) test for electronic and electrical Jun 2016 components: Part 2 Mechanical endurance

    21 IS 9186:1979 Guide for screening of electronic and electrical items Jun 2016 | IEC Doc 56(UK) 71 22 IS 9692(Part 1):1980 Guide on maintainability of equipment: Part 1 Jun 2016 Introduction to maintainability | IEC Doc 56(CO) 68 23 IS 9692(Part 2):1980 Guide on maintainability of equipment: Part 2 Jun 2016 Maintainability requirements in specifications and | IEC Doc 56(CO) 69 contracts 24 IS 9692(Part 3):1981 Guide on maintainability of equipment: Part 3 Jun 2016 Maintainability programme | IEC Doc 56(CO) 70 25 IS 9692(Part 4):1987 Guide on maintainability of equipment: Part 4 Test and Jun 2016 diagnostic procedures | IEC 60056(Sect) 190 26 IS 9692(Part 5):1985 Guide on maintainability of equipment: Part 5 Jun 2016 Maintainability studies during the design phase | IEC 60056(Sect) 185 27 IS 9692(Part 6):1983 Guide on maintainability of equipment: Part 6 Jun 2016 Maintainability verification | MIL-STD 47A(1973) 28 IS 9692(Part 7):1984 Guide on maintainability of equipment: Part 7 Jun 2016 Collection, analysis and presentation of data related to | IEC 60706-3 maintainability 29 IS 9692(Part 8/Sec 1):1988 Guide on maintainability of equipment: Part 8 Jun 2016 Maintenance and maintenance support planning, Sec 1 | IEC 60706-8 General 30 IS 9692(Part 8/Sec 2):1988 Guide on maintainability of equipment: Part 8 Jun 2016 Maintenance and maintenance support planning, Sec 2 | IEC 60706-8 Maintenance support analysis 31 IS 9692(Part 8/Sec 3):1988 Guide on maintainability of equipment: Part 8 Jun 2016 Maintenance and maintenance support planning, Sec 3 | IEC 60706-8 Maintenance planning analysis 32 IS 9692(Part 8/Sec 4):1988 Guide on maintainability of equipment: Part 8 Jun 2016 Maintenance and maintenance supporting planning, Sec | IEC 60706-8 4 Maintenance support resources requirements 33 IS 10139:1982 Presentation of reliability, maintainability and Jun 2016 availability predictions | IEC Doc 56(CO) 80

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 8 -

  • 34 IS 10673:1983 Sampling plans and procedures for inspection by Jun 2016 attributes for electronic items | IEC 60410:1973 35 IS 11137(Part 2):2012 Analysis techniques for system reliability : Part 2 Jun 2016 Procedure for failure mode and effects analysis / IEC 60812(2006) (FMEA) (First Revision) 36 IS 11743:1986 Guide on human safety in design, manufacture, use Jun 2016 and maintenance of electronic equipment

    37 * IS 15036:2001 Dependability management - Application guide - Jun 2016 Analysis techniques for dependability - Guide on | IEC 60300-3-1 methodology 38 IS 15037:2011 Analysis techniques for dependability - Reliability block Dec 2014 diagram and boolean methods (First Revision) / IEC 61078(2006) 39 IS 15038:2011 Reliability growth - Statistical test and estimation Dec 2014 methods (First Revision) / IEC 61164(2004) 40 IS 15444(Part 1):2012 Reliability stress screening -Part 1: Repairable Jun 2016 assemblies manufactured in lots (First Revision) / IEC 61163-1(2006) 41 * IS 15444(Part 2):2005 Reliability stress screening: Part 2 Electronic Jun 2016 / IEC 61163-2(1998) 42 IS 15474:2004 Dependability management - Application guide - Life Jun 2016 cycle costing | IEC 60300-3-3 43 IS 15474(Part 3/Sec 6):2005 Dependability management: Part 3 Application guide - Jun 2016 Sec 6 Software aspects of dependability / IEC 60300-3-6(1997) 44 IS 15474(Part 3/Sec 7):2005 Dependability management: Part 3-7 Application guide - Jun 2016 Reliability stress screening of electronic hardware / IEC 60300-3-7(1999) 45 IS 15613:2005 Software dependability through the software life-cycle Jun 2016 process - Application guide / IEC 61713(2000) FINALISED DRAFTS UNDER PRINT

    1 DOC.LITD 2(3268) Dependability management - Part 3-11: Application 2001 guide - Reliability centred maintenance / IEC 60300-3-11:2009 2 IS 8161(Part 2):1986 equipment reliability testing: Part 2 Design of test Jun 2013 cycles(First Revision) | IEC 60605-2 3 IS 8161(Part 4):1985 Equipment reliability testing: Part 4 Statistical procedure Jun 2013 for exponential distribution - Point estimates, | IEC 60605-4 Confidence intervals, preiction intervals and Tolerance intervals (First Revision) 4 IS 15036:2001 Dependability management - Part 3: Application guide - Dec 2013 Analysis techniques for dependability - Sec 1: Guide | IEC 60300-3-1 on methodology(First Revision) 5 IS 15474:2004 Dependability management - Part 3: Application guide Jun 2013 - Sec 3: Life cycle costing | IEC 60300-3-3 DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

    1 DOC.LITD 2(10366) Hazard and operability studies ( HAZOP studies) - Application guide / IEC 61882:2001

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 9 -

  • 2 DOC.LITD 2(10367) Obsolescence management - Application guide / IEC 62402:2007 3 DOC.LITD 2(10369) Dependability management - Part 3: Application guide Sec 10 : Maintainability / IEC 60300-3-10:2001 4 DOC.LITD 2(10370) Dependability management - Part 3: Application guide Sec 2 Collection of dependability data from the field / IEC 60300-3-2:2004 5 DOC.LITD 2(10371) Dependability management - Part 3: Application guide Sec 5: Reliability test conditions and statistical test / IEC 60300-3-5:2001 principles ASPECT WISE REPORT METHODS OF TEST 6 CODES OF PRACTICES 35 TERMINOLOGY 1 OTHERS 3

    TOTAL : 45

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 10 -

  • LITD 3 ELECTROMECHANICAL COMPONENTS AND MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT SCOPE To prepare Indian Standards relating to mechanical structures and similar devices such as switches, relays, connectors, sockets, for use in electronic and telecommunication equipment LIAISON WITH IEC COMMITTEES IEC/TC 48 Electromechanical Components and Mechanical Structures for Electronic Equipment IEC/SC 48B Connectors IEC/SC 48D Mechanical Structures for Electronic Equipment Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

    1 ** ISQC 960000 : 1995 Electromechanical switches for use in electronic Jun 2016 equipment. Part 1: Generic specification / IECQC 960000:1995 2 ** ISQC 960100 : 2000 Electromechanical Switches for use in electronic Jun 2016 equipment: Part 2 Sectional specification for Rotary / IECQC 960100:1991 switches 3 ISQC 960500: : 1999 Electromechanical switches for use in electronic Jun 2016 equipment. Part 3: Sectional specification for in-line / IECQC960500:1999 package switches 4 ISQC 960300 : 1999 Sectional specification for Sensitive switches Jun 2016 / IECQC 960300:1991 5 ISQC 960400 : 1999 Sectional specification for Push-button switches Jun 2016 / IECQC 960400:1991 6 ISQC 960101 : 2000 Electromechanical Switches for use in electronic Jun 2016 equipment: Part 2 Sectional specification for Rotary / IECQC 960101:1991 switches - Blank detail specification for Rotary 7 ISQC 960501 : 2007 Electromechanical switches for use in electronic Jun 2016 equipment Part 3 Sectional specification for In-line / IECQC 960501:1991 package switches Sec 1 Blank detail specification 8 ISQC 960201 : 2007 Electromechanical switches for use in electronic Jun 2016 equipment Part 4 Sectional specification for lever / IECQC 960201:1991 (Toggle) switches Sec 1 Blank detail specification for lever (toggle) switches 9 ISQC 960301 : 1999 Detail specification for One pole, unsealed subminiature Jun 2016 sensitive switches, 250 V max., 5 A max., electrical / IECQC 960301:1994 10 IS 1885(Part 40):1974 Electrotechnical vocabulary: Part 40 Connectors Jun 2016

    11 IS 1885(Part 67):1988 Electrotechnical vocabulary: Part 67 Mechanical Jun 2016 structures for electronic equipment | IEC 60916(1988) 12 IS 2628(Part 1):1964 Rotary wafer switches (Low current rating): Part 1 Tests Jun 2016 1 and general requirements | IEC 60132-1(1962) 13 IS 2628(Part 2):1967 Rotary wafer switches (Low current rating): Part 2 Jun 2016 Rotary wafer switches with central mounting | IEC 60132-1(1962) 14 IS 2926:1964 Dimensions of connectors for radio batteries Jun 2016 | IEC Doc 48(CO)17 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 11 -

  • 15 IS 3452(Part 1):1966 Toggle switches: Part 1 General requirements and tests Jun 2016 3 | IEC 60131-1(1962) 16 IS 3452(Part 2):1970 Toggle switches: Part 2 Toggle switches, Type 1 and Jun 2016 3 Type 2 | IEC 60131-2(1963) 17 IS 3544:2009 General Requirements and tests for tag strips (first Feb 2016 revision)

    18 ** IS 3720:1983 Dimensions of polarised plugs for hearing aids (first Jun 2016 revision) / IEC 60090(1973) 19 IS 3826(Part 2):1970 Connectors for frequencies below 3 MHz: Part 2 Jun 2016 Battery connectors for electronic equipment | IEC 60130-3:1965 20 IS 4007(Part 1):1982 Terminals for electronic equipment: Part 1 General Jun 2016 requirements and tests (first revision) | JSS:52710-1974 21 IS 4007(Part 2/Sec 1):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 specification for terminals, Section 1 Terminal, | JSS:52710-1974 insulated, with insulated captive screw cap, Type TSC 1 22 IS 4007(Part 2/Sec 2):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 2 Terminal, non- | JSS:52710-1974 insulated, with insulated captive screw cap, Type TSC 2 23 IS 4007(Part 2/Sec 3):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 specification for Terminals, Section 3 Terminal, non- | JSS:52710-1974 insulated, with insulated captive screw cap, Type TSC 3 24 IS 4007(Part 2/Sec 4):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 4 Terminal, | JSS:52710-1974 insulated, with insulated captive screw cap; Type TSC 4 25 IS 4007(Part 2/Sec 5):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 5 Terminal, | JSS:52710-1974 insulated, side slotted, with insulated captive screw cap, Type TSC 5 26 IS 4007(Part 2/Sec 6):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 6 Terminal, non- | JSS:52710-1974 insulated, with insulated captive spring cap, tapped hole panel mounting, Type TSL 27 IS 4007(Part 2/Sec 7):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 7 Terminal, non- | JSS:52710-1974 insulated, with insulated captive springg cap, Type TSL 2 28 IS 4007(Part 2/Sec 8):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 8 Terminal, | JSS:52710-1974 insulated, with insulated captive spring cap, Type TSL 3 29 IS 4007(Part 2/Sec 9):1983 Terminals for electronic equipment: Part 2 Detail Jun 2016 specification for terminals, Section 9 Terminal | JSS:52710-1974 insulated, with insulated captive spring cap, Type TSL 4 30 IS 4007(Part 2/Sec 10):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 10 Terminal, | JSS:52710-1974 insulated, with insulated captive spring cap, Type TSL 5 31 IS 4007(Part 2/Sec 11):1983 Terminals for Electronic Equipment: Part 2 Detail Jun 2016 Specification for terminals, Section 11 Terminal, | JSS:52710-1974 insulated, with insulated captive spring cap, Type TSL 6 32 IS 4586(Part 1/Sec 1):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC60390:1972 Spindles, Sec 1 General and definitions (second 33 IS 4586(Part 1/Sec 2):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 2 Plain round spindle (second revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 12 -

  • 34 IS 4586(Part 1/Sec 3):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 3 Flatted spindle (second revision) 35 IS 4586(Part 1/Sec 4):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 4 Slotted spindle (second revision) 36 IS 4586(Part 1/Sec 5):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 5 Hollow spindle (second revision) 37 IS 4586(Part 1/Sec 6):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 6 Coupling spindle (second revision) 38 IS 4586(Part 1/Sec 7):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 7 Concentric spindle (second revision) 39 IS 4586(Part 1/Sec 8):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 8 Double flatted spindle (second revision) 40 IS 4586(Part 1/Sec 9):1987 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 9 Knurled spindle (second revision) 41 IS 4586(Part 1/Sec 10):1978 Dimensions of spindle and mounting arrangements for Jun 2016 spindle operated electronic components: Part 1 | IEC 60390:1972 Spindles, Sec 10 Slotted and knurled spindle (first 42 IS 4586(Part 2/Sec 1):1980 Dimensions of spindles and mounting arrangements for Jun 2016 spindle operated electronic components: Part 2 | IEC 60620:1978 Mounting arrangements, Sec 1 Components and panels cut-outs (first revision) 43 IS 4586(Part 2/Sec 2):1980 Dimensions of spindle and mounting arrangements for Jun 2016 spindle operated electronic components: Part 2 Mounting arrangements, Sec 2 Fixing nuts (first 44 IS 4794(Part 1):1968 Push-button switches: Part 1 General requirements and Jun 2016 tests | IEC 60048(CO)9 45 IS 4794(Part 2):1986 Push button switches: Part 2 Push button switches, Jun 2016 Type 1

    46 IS 4795(Part 1):2009 Holders for indicator lamps for electronic and Feb 2016 2 telecommunication equipment specification: Part 1 General requirements and tests(First Revision) 47 IS 4795(Part 2):1978 Holders for indicator lamps for electronic and Jun 2016 telecommunication equipment: Part 2 Type E 10, E 14 and BA 9 48 IS 5033:1969 Telescopic aerials for portable radio receivers Jun 2016

    49 IS 5051(Part 1):1982 Relays for electronic and telecommunication Jun 2016 equipment: Part 1 General requirements and tests (first | JSS 50700-1972 50 IS 5051(Part 2/Sec 1):1982 Relays for electronics and telecommunication Jun 2016 equipment: Part 2 Reed relays, Section 1 General | JSS 50703-1980 51 IS 5051(Part 2/Sec 2):1982 Relays for electronics and telecommunication Jun 2016 equipment: Part 2 Reed relays, Section 2 Type RR 1 | JSS 50703-1980 52 IS 5051(Part 2/Sec 3):1982 Relays for electronics and telecommunication Jun 2016 equipment: Part 2 Reed relays, Section 3 Type RR 2 | JSS 50703-1980

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 13 -

  • 53 IS 5051(Part 3/Sec 1):1985 Relays for electronic and telecommunication Jun 2016 equipment: Part 3 Armature relays, non sealed, Sec 1 | JSS 50711-1975 54 IS 5054(Part 1/Sec 1):1995 Radio frequency connectors: Part 1 General Jun 2016 1 requirements and measuring methods, Section 1 / IEC 60169-1-1:1987 General (Second Revision) 55 IS 5054(Part 1/Sec 2):1995 Radio frequency connectors: Part 1 General Jun 2016 requirements and measuring methods, Section 2 / IEC 60169-1-1:1987 Electrical tests and measuring procedures: Reflection factor (second revision) 56 ** IS 5054(Part 1/Sec 3):1995 Radio frequency connectors : Part 1 General Jun 2016 requirements and measuring methods, Section 3 / IEC 60169-1-3:1988 Electrical tests and measuring procedures : Screening effectiveness (second revision) 57 IS 5054(Part 2):2007 Radio frequency connectors: Part 2 Coaxial unmatched Jun 2016 connector

    58 IS 5054(Part 24):2007 Radio frequency connectors: Part 24 Radio frequency Feb 2016 coaxial connectors with screw coupling, typically for / IEC 60169-24(1991) use in 75 OHM cable distribution systems (Type F) 59 IS 6089(Part 1):1971 Sensitive switches: Part 1 General requirements and Jun 2016 tests | IEC 60163 60 IS 6089(Part 2):1985 Sensitive switches: Part 2 SPDT unsealed, Type Jun 2016 1Sensitive switches: Part 2 SPDT unsealed, Type 1 | JSS 51204-1972 61 IS 6102(Part 1):2009 Finger knobs used in electronic and telecommunication Feb 2016 equipment: Part 1 General requirements and tests(First Revision) 62 IS 7751(Part 1):1975 Slide switches: Part 1 General requirements and tests Jun 2016

    63 IS 7751(Part 2):1985 Slide switches: Part 2 Slide switches, Type 1 Jun 2016

    64 IS 9606:1980 Dimensions of panels and racks (482.6 mm systems) Jun 2016 | IEC 60297(1975) 65 IS 9647:1986 General requirements and methods of tests for low Jun 2016 frequency connectors below 3 MHz including dc (first | IEC 60130-1(1962) revision) 66 IS 9891(Part 1):1981 Edge connectors for printed wiring board and insulated Jun 2016 board, having a contact pitch of 2.54 mm: Part 1 Test | JSS: 50805 schedule and requirements 67 IS 9891(Part 2):1981 Edge connectors for printed wiring board and insulated Jun 2016 board, having a contact pitch of 2.54 mm: Part 2 Non- | JSS: 50805 polarized plug types 9891 IS-01011/25/33-W-A-0.75 68 IS 9891(Part 3):1981 Edge connectors for printed wiring board and insulated Jun 2016 board, having a contact pitch of 2.54 mm : Part 3 Non- | JSS: 50805 polarised plug types 9891 IS-02-11/25/33-I-A-0.75 69 IS 9891(Part 4):1981 Edge connectors for printed wiring board and insulated Jun 2016 board, having a contact pitch of 2.54 mm: Part 4 Non- | JSS: 50805 polarised socket types 9891 IS-03-11/25/33-W/I-A/B-0.75 70 IS 10482(Part 1):1983 Connectors for printed wiring board: Part 1 Test Jun 2016 schedule and requirements | JSS: 50806 71 IS 10482(Part 2):1983 Connectors for printed wiring board: Part 2 Male Jun 2016 adapter, contact spacing 3.962mm Category 'C' Types | JSS: 50806 10482 IS-01-6/10/12/15/16/18/22-a/b-2-A-5/1.27 or

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 14 -

  • 72 IS 10482(Part 3):1983 Connectors for printed wiring board: Part 3 Socket, Jun 2016 Card insertion,contact spacing 3.962 mm Category 'A' | JSS: 50806 Types 10482 IS-02-6/10/12/15/16/18/22-a/b-2-A/B/C- 5/1.27 or 2.54/0.4 73 IS 10482(Part 4):1986 Connectors for printed wiring board: Part 4 Socket, Jun 2016 Card-insertion, contact spacing 3.692 mm, categories A | JSS: 50806 and AD types 10482 IS-03-6/10/15/18/22/28/36/43-a/b- 2/3/4-A/B/C-5/1.27 to 2.54/0.4 74 IS 11075(Part 1):1984 Radio frequency connectors of BNC, TNC and UHF Jun 2016 series: Part 1 Test schedule and requirements | JSS: 52401 75 IS 11075(Part 2/Sec 1):1984 Radio frequency connectors of BNC, TNC and UHF Jun 2016 series: Part 2 BNC series, Sec 1 Straight plug, male, | JSS: 52401 cabled, Type 11075 IS-01-01 to 04 and 50 to 54 76 IS 11075(Part 2/Sec 2):1985 Radio frequency connectors of BNC, TNC and UHF Jun 2016 series: Part 2 BNC Series, Sec 2 Cabled socket 11075 | JSS: 52401 IS-02-01 to 02 and 50 to 51 77 IS 11075(Part 2/Sec 3):1985 Radio frequency connectors of BNC, TNC and UHF Jun 2016 Series: Part 2 BNC Series, Sec 3 Plug, Right angle, | JSS: 52401 Cabled Type 11075 IS-03-01 to 02 and 50 to 51 78 IS 11162(Part 1):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment: Part 1 Type 1

    79 IS 11162(Part 2):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment : Part 2 Type 2

    80 IS 11162(Part 3):1985 Dimensionsof non-insulated terminal tags for electronic Jun 2016 equipment : Part 3 Type 3

    81 IS 11162(Part 4):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment: Part 4 Type 4

    82 IS 11162(Part 5):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment : Part 5 Type 5

    83 IS 11162(Part 6):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment : Part 6 Type 6

    84 IS 11162(Part 7):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment : Part 7 Type 7

    85 IS 11162(Part 8):1985 Dimensions of non-insulated terminal tags for electronic Jun 2016 equipment: Part 8 Type 8

    86 ** IS 11719(Part 1/Sec 1):1986 Dimensions of mechanical structures of the 482.6 mm Jun 2016 series: Part 1 Cabinets and pitches of rack structures, | IEC 60297-2(1982) Sec 1 Cabinets 87 ** IS 11719(Part 1/Sec 2):1986 Dimensions of mechanical structures of the 482.6 mm Jun 2016 series: Part 1 Cabinets and pitches of rack structures, | IEC 60297-2(1982) Sec 2 Pitches of rack structures 88 ** IS 11719(Part 2/Sec 1):1986 Dimensions of mechanical structures of the 482.6 mm Jun 2016 series: Part 2 Subracks and associated plug-in-units, | IEC 60297-3(1984) Sec 1 Subracks 89 ** IS 11719(Part 2/Sec 2):1986 Dimensions of mechanical structures of the 482.6 mm Jun 2016 series: Part 2 Subracks and associated plug-in-units, | IEC 60297-3:1984 Sec 2 Plug-in units 90 IS 11777(Part 1):1986 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9(1971) Part 1 Test schedule and requirements

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 15 -

  • 91 IS 11777(Part 2):1986 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9(1971) Part 2 Free three-pin connector for microphone, Type 11777 IS-01 92 IS 11777(Part 3):1986 Circular Connectors for Radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9(1971) Part 3 Fixed three-socket connector for sound equipment,Type 11777 IS-02 93 IS 11777(Part 4):1986 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9(1971) Part 4 Free five-pin connector for record player and tape recorder, Type 11777 IS-03 94 IS 11777(Part 5):1986 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9(1971) Part 5 Fixed five-socket connector for record player and tape recorder, Type 11777 IS-04 95 IS 11777(Part 6):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 6 Free seven-pin connector for stereo tape player with car radio Type 11777 IS-05 96 IS 11777(Part 7):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 7 Fixed seven-socket connector for stereo tape player with car radio, Type 11777 IS-06 97 IS 11777(Part 8):1992 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 8 Free Seven-pin connector for micro phone with remote control, Type 11777 IS-07 98 IS 11777(Part 9):1992 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 9 Fixed seven-socket connector for microphone with remote control, Type 11777 IS-08 99 IS 11777(Part 10):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 10 Free six-pin connector for various applications,Type 11777 IS-09 100 IS 11777(Part 11):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 11 Fixed six-socket connector for various applications, Type 11777 IS-10 101 IS 11777(Part 12):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 12 Free six-socket connector for various applications, Type 11777 IS-11 102 IS 11777(Part 13):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9A(1975) Part 13 Fixed six-pin connector for various applications, Type 11777 IS-12 103 IS 11777(Part 14):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9B(1975) Part 14 Free eight-pin connector for microphone and other various applications, Type 11777 IS-13 104 IS 11777(Part 15):1987 Circular connectors for radio and associated sound Jun 2016 equipment for frequencies below 3 MHz including dc: | IEC 60130-9B(1975) Part 15 Fixed eight-socket connector for microphone and other applications, Type 11777 IS-14 105 IS 11778(Part 1):1987 Low frequency threaded coupling circular connectors: Jun 2016 Part 1 Test schedule and requirements | JSS: 50812

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 16 -

  • 106 IS 11779(Part 1):1987 Low frequency (Below 3 MHz including dc) miniature, Jun 2016 bayonet coupling circular connectors: Part 1 Test | IEC 60130-7:1971 Schedule and requirements 107 IS 12195(Part 1/Sec 1):1987 Dimensions of sockets for relays used in electronic Jun 2016 and telecommunication equipment: Part 1 Sockets for armature relays, Sec 1 8 Pin socket 108 IS 12195(Part 1/Sec 2):1987 Dimensions of sockets for relays used in electronic Jun 2016 and telecommunication equipment: Part 1 Sockets for armature relays, Sec 2 11 Pin socket 109 IS 12380(Part 1):1988 Radio frequency connectors of N series: Part 1 Test Jun 2016 schedule and requirements | JSS: 52402 110 IS 12419(Part 1):1988 Radio frequency connectors of SMA, SMB and SMC Jun 2016 series: Part 1 Test schedule and requirements | JSS: 52405 111 IS 12420(Part 2):1988 Circular audio connectors: Part 2 Socket, Five Jun 2016 contacts, non rigid Type 12420 IS-01 | JSS: 50831 112 IS 12420(Part 3):1988 Circular audio connectors: Part 3 Plug, Five contacts, Jun 2016 non rigid Type 12420 IS-02 | JSS: 50831 113 IS 12420(Part 4):1988 Circular audio connectors: Part 4 Plug five contacts, Jun 2016 rigid Type 12420 IS-03-R | JSS: 50831 114 IS 12420(Part 5):1988 Circular audio connectors: Part 5 Plug ten contacts, Jun 2016 rigid Type 12420 IS-04-R | JSS: 50831 115 IS 12420(Part 6):1988 Circular audio connectors:Part 6 Plug ten contacts, non Jun 2016 rigid type 12420 IS-05-R | JSS: 50831 116 IS 12420(Part 7):1988 Circular andio connectors: Part 7 Socket ten contacts, Jun 2016 non rigid type 12420 IS-06-N | JSS: 50831 117 IS 12420(Part 8):1988 Circular audio connectors: Part 8 Plug ten contacts, Jun 2016 rigid Type 12420 IS-07-R | JSS: 50831 118 IS 12448(Part 1):1988 Basic testing procedures and measuring methods for Jun 2016 electromechanical components for electronic | IEC 60512-1(1984) equipment: Part 1 General 119 IS 12448(Part 2/Sec 1):1988 Part 2 General examination, electrical continuity and Jun 2016 contact resistance tests, insulation tests & voltage | IEC 60512-2(1985) stress tests: Sec 1 General requirements 120 IS 12448(Part 2/Sec 2):1988 Part 2 General examination, electrical continuity and Jun 2016 contact resistance tests, insulation tests voltage stress | IEC 60512-2(1985) tests: Sec 2 Electrical continuity and contact resistance tests 121 IS 12448(Part 2/Sec 3):1988 Part 2 General examination, electrical continuity and Jun 2016 contact resistance tests, insulation tests & voltage | IEC 60512-2(1985) stress tests, Sec 3 Insulation tests 122 IS 12448(Part 2/Sec 4):1988 Part 2 General examination, electrical continuity and Jun 2016 contact resistance tests, insulation tests & voltage | IEC 60512-2(1985) stress tests, Sec 4 Voltage stress tests 123 IS 12448(Part 3):1989 Basic testing procedures and measuring methods for Jun 2016 electromechanical components for electronic | IEC 60512-3(1976) equipment: Part 3 Current carrying capacity test 124 IS 12448(Part 4):1989 Basic testing procedures and measuring methods for Jun 2016 electromechanical components for electronic | IEC 60512-4(1976) equipment: Part 4 Dynamic stress tests

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 17 -

  • 125 IS 12448(Part 5/Sec 1):1989 Part 5 Impact tests (Free components), Static load Jun 2016 tests (Forced components); endurance tests & overload | IEC 60512-5(1977) tests, Sec 1 Impact test 126 IS 12448(Part 5/Sec 2):1989 Part 5 Impact tests (Free components), static load Jun 2016 tests (Fixed components), endurance tests and | IEC 60512-5(1977) overload tests, Sec 2 Static load test (Fixed 127 IS 12448(Part 5/Sec 3):1989 Part 5 Impact tests (Free components), static load Jun 2016 tests (Fixed components), endurance tests and | IEC 60512-5(1977) overload tests, Sec 3 Endurance tests 128 IS 12448(Part 5/Sec 4):1989 Part 5 Impact tests (Free components), static load Jun 2016 tests (Fixed components), endurance tests and | IEC 60512-5(1977) overload tests, Sec 4 Overload tests 129 IS 12448(Part 6):1991 Basic testing procedures and measuring methods of Jun 2016 electromechanical components for electronic | IEC 60512-6(1977) equipment: Part 6 Climatic tests and soldering tests 130 IS 12448(Part 7):1991 Basic testing procedures and measuring methods for Jun 2016 electromechanical components for electronic | IEC 60512-7(1988) equipment: Part 7 Mechanical operating tests and 131 IS 12448(Part 8):1992 Basic testing procedures and measuring methods for Jun 2016 electromechanical components for electronic | IEC 60512-8(1977) equipment: Part 8 Connector tests 132 IS 12448(Part 9):1992 Basic testing procedures and measuring methods for Jun 2016 electromechanical components for electronic | IEC 60512-9(1977) equipment: Part 9 Cable-clamping tests, explosion hazard tests, chemical resistance tests, fire hazard tests of resistance tests, capacitanc 133 IS 13984(Part 1):1995 Specification for link and test connectors: Part 1 Test Jun 2016 schedule and requirements | IEC 60130-12 (1976) 134 IS 13984(Part 2/Sec 1):1994 Specification for link and test connectors: Part 2 Jun 2016 Socket for conventional wiring, Sec 1 Two-way socket | IEC 60130-12 (1976) link and test connector 135 IS 13984(Part 2/Sec 2):1994 Specification for link and test connectors: Part 2 Jun 2016 Socket for conventional wiring, Sec 2 Three-way socket | IEC 60130-12 (1976) link and test connector 136 IS 13984(Part 2/Sec 3):1994 Specification for link and test connectors: Part 2 Jun 2016 Socket for conventional wiring, Sec 3 Four-way socket | IEC 60130-12 (1976) link and test connector 137 IS 13984(Part 2/Sec 4):1995 Specification for link and test connectors: Part 2 Jun 2016 Socket for conventional wiring, Sec 4 Six-way socket | IEC 60130-12 (1976) link and test connector 138 IS 13984(Part 3/Sec 1):1995 Specification for link and test connectors: Part 3 Jun 2016 Socket for mounting on printed wiring boards: Sec 1 | IEC 60130-12 (1976) Two-way flat mounting socket link and test connector 139 IS 13984(Part 3/Sec 2):1995 Specification for link and test connectors: Part 3 Jun 2016 Socket for mounting on printed wiring boards: Sec 2 | IEC 60130-12 (1976) Two-way upright mounting socket link and test connector 140 IS 13984(Part 3/Sec 3):1995 Specification for link and test connectors: Part 3 Jun 2016 Socket for mounting on printed wiring boards: Sec 3 | IEC 60130-12 (1976) Three-way socket link and test connector 141 IS 13984(Part 3/Sec 4):1995 Specification for link and test connectors: Part 3 Jun 2016 Socket for mounting on printed wiring boards: Sec 4 | IEC 60130-12 (1976) Four-way socket link and test connector 142 IS 13984(Part 3/Sec 5):1995 Specification for link and test connectors: Part 3 Jun 2016 Socket for mounting on printed wiring boards: Sec 5 | IEC 60130-12 (1976) Six-way socket link and test connector

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 18 -

  • 143 IS 13984(Part 4/Sec 1):1995 Specification for link and test connectors: Part 4 U-Link Jun 2016 plug:Sec 1 U-Link Polarized | IEC 60130-12 (1976) 144 IS 13984(Part 4/Sec 2):1995 Specification for link and test connectors: Part 4 U-Link Jun 2016 plug: Sec 2 U-Link Non-Polarized | IEC 60130-12 (1976) 145 IS 13984(Part 4/Sec 3):1995 Specification for link and test connectors: Part 4 U-Link Jun 2016 Plug: Sec 3 Double U-Link Plug Polarized | IEC 60130-12 (1976) 146 IS 13984(Part 5/Sec 1):1995 Specification for link and test connectors: Part 5 Cord Jun 2016 Plug: Sec 1 Polarized | IEC 60130-12 (1976) FINALISED DRAFTS UNDER PRINT

    1 IS 5054(Part 8):2000 Radio frequency conectors Part 8: Radio frequency coaxial connectors with inner diameter of outer / IEC 61169-8:2007 conductor 6.5mm (0.256in) with bayonet lock- Characteristic impedance 50 ohm (Type BNC) DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

    1 IS 11777:192014 Connectors for Frequencies Below 3 Mhz Part 9: Circular connectors for radio and associated sound / IEC /TS 60130-9:2011 2 IS 4586:192014 Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for / IEC /TS 60915:2006 the mounting of single-hole, bush-mounted, shaft- operated electronic components ASPECT WISE REPORT PRODUCT 70 METHODS OF TEST 32 TERMINOLOGY 2 DIMENSIONS 29 OTHERS 15

    TOTAL : 148

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 19 -

  • LITD 4 ELECTRON TUBES AND DISPLAY DEVICES SCOPE To prepare Indian Standards relating to a) Electronic tubes including X-ray andmicrowave tubes b)Electronic display devices and specific relevant components. LIAISON WITH IEC COMMITTEES IEC/TC 110 Electronic Display Devices Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

    1 IS 1885(Part 4/Sec 1):1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jun 2016 1 Common terms (first revision)

    2 IS 1885(Part 4/Sec 2):1973 Electrotechnical vocabulary: Part 4 Electron tubes,Sec Jun 2016 2 X-ray tubes (first revision)

    3 IS 1885(Part 4/Sec 3):1970 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jun 2016 3 3 Microwave tubes | IEC 235-1 4 IS 1885(Part 4/Sec 4):1970 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jun 2016 1 4 Cathode-ray tubes

    5 IS 1885(Part 4/Sec 5):1972 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Dec 2015 5 Pulse terms

    6 IS 1885(Part 4/Sec 6):1972 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jun 2016 6 Noise in microwave tubes

    7 IS 1885(Part 4/Sec 7):1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jun 2016 7 Camera tubes

    8 IS 1885(Part 4/Sec 8):1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Dec 2015 8 Photosensitive devices

    9 ** IS 2032(Part 9):1969 Graphical symbols used in electrotechnology: Part 9 Jun 2016 Electron tubes (other than microwave tubes) | IEC 117-6 10 ** IS 2032(Part 13):1971 Graphical symbols used in electrotechnology: Part 13 Jun 2016 Microwave tubes | IEC 117-11 11 ** IS 2032(Part 14):1971 Graphical symbols used in electrotechnology: Part 14 Jun 2016 Microwave technology | IEC 117-11 12 IS 2597(Part 1):1964 Code of practice for the use of electron tubes: Part 1 Jun 2016 2 Commercial receiving tubes | BSCP 1005 (1962) 13 IS 2597(Part 2):1967 Code of practice for the use of electron tubes: Part 2 Jun 2016 1 Special quality receiving tubes | BSCP 1005 (1962) 14 IS 2597(Part 3):1969 Code of practice for the use of electron tubes: Part 3 Dec 2015 1 Transmitting and industrial tubes | BSCP 1005 (1962) 15 IS 2597(Part 4):1970 Code of practice for the use of electron tubes: Part 4 Jun 2016 1 Cathode ray tubes | BSCP 1005 (1962) 16 IS 2597(Part 5):1971 Code of practice for the use of electron tubes: Part 5 Dec 2015 1 Rectifiers and thyratrons | BSCP 1005 (1962) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 20 -

  • 17 IS 4147:1981 Methods of measurements for electron tubes - Jun 2016 Receiving and transmitting tubes(first revision) | IEC 151 18 IS 4579:1968 Methods of measurements on television picture tubes Jun 2016

    19 IS 4697:1968 Methods of measurements on Geiger Muller counter Dec 2015 2 tubes

    20 IS 5323:1969 Letter symbols and abbreviations for electron tubes Jun 2016

    21 IS 5627:1987 Methods of measurements of radar and oscilloscope on Dec 2015 cathode-ray tubes(first revision) | IEC 151-14(1975) 22 IS 5840(Part 1):1970 Dimensions of cathode-ray tubes: Part 1 Tube out-lines Jun 2016 2

    23 IS 5840(Part 2):1970 Dimensions of cathode-ray tubes: Part 2 Bases Jun 2016 1

    24 IS 5840(Part 3):1970 Dimensions of cathode-ray tubes: Part 3 EHT terminals Jun 2016

    25 IS 6134(Part 1):1978 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 1 Common to all microwave | IEC 235-2(1972) tubes [Incorporating IS 6134(Part 1/Sec 1) and IS 6134(Part 1/Sec 2)] 26 IS 6134(Part 2):1973 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 2 Oscillator tubes | IEC 235-2 27 IS 6134(Part 3):1973 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 3 Amplifier tubes | IEC 235-2 28 IS 6134(Part 4):1977 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 4 Magnetrons | IEC 235-2 29 IS 6134(Part 5):1980 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 5 Parasitic noise | IEC 235-2 30 IS 6134(Part 6):1981 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 6 Low-power oscillator | IEC 235-5 31 IS 6134(Part 7):1981 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 7 High power klystrons | IEC 235-6 32 IS 6134(Part 8):1981 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 8 Gas-filled microwave | IEC 235-7 switching devices 33 IS 6134(Part 9):1981 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 9 Backward-wave oscillator | IEC 235-8 tube '0' type 34 IS 6134(Part 10):1981 Methods of measurement of electrical characteristics Jun 2016 of microwave tubes: Part 10 Crossed-field amplifier | IEC 235-9 35 IS 6136:1971 Basic requirements for cathode-ray tubes Jun 2016

    36 IS 6214:1971 Specification for phosphors for cathode-ray tubes Dec 2015

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 21 -

  • 37 IS 6567:1972 Radiation protection for an X-ray tube in a protective Jun 2016 1 tube-housing,operating between 10kV and 400 kV

    38 IS 6757:1972 Dimensions for high tension cable terminations for X- Jun 2016 ray tubes

    39 IS 6758:1972 Dimensions for high tension receptacles for X-ray tubes Dec 2015

    40 IS 7144:1973 Methods of measurements on camera tubes Jun 2016 | IEC 151-26(1971) 41 IS 7146(Part 1):1973 Methods of measurement on photosensitive devices: Jun 2016 1 part 1 Basic considerations | IEC 306-1(1969) 42 IS 7146(Part 2):1974 Methods of measurement on photosensitve devices: Jun 2016 Part 2 Photo tubes | IEC 306-2(1969) 43 IS 7146(Part 3):1974 Methods of measurement on photosensitve devices: Jun 2016 Part 3 Photoconductive cells for use in the visible | IEC 306-3(1970) 44 IS 7146(Part 4):1974 Methods of measurement on photosensitive devices: Jun 2016 Part 4 Photomultipliers | IEC 306-4(1971) 45 IS 8441:1977 Methods of measurements on incidental X-radiation Jun 2016 from electron tubes

    46 IS 9492:1980 Methods of measurement of RF/microwave leakage Jun 2016 from integral circuit electron tubes | IEC 235-2 & 2C(1976) 47 IS 9883:1981 Photometric and colorimetric methods of Jun 2016 measurements of the light emitted by a cathode-ray | IEC 441(1974) 48 IS 10071:1981 Methods of measurement for hot cathode gas filled Jun 2016 | IEC 151-17(1969) 49 IS 10503:1983 Methods of measurement of colour television picture Jun 2016 tubes | IEC 151-28(1978) 50 IS 13899:1993 Blank detail specification for colour picture tube with Jun 2016 electrostatic focussing and electromagnetic deflection for colour television receivers 51 IS 13900:1993 Generic specification for colour picture tube with Jun 2016 electrostatic focussing and electromagnetic deflection for colour television receivers 52 IS 15934(Part 1):2012 Liquid crystal and Solid-State Display Devices - Part 1 May 2015 : Generic specification / IEC 61747-1(2003) 53 IS 15934(Part 2):2012 Liquid Crystal and Solid-State Display Devices Part 2: Jul 2015 Liquid crystal display modules - Sectional specification / IEC 61747-2(1998) 54 IS 15934(Part 3):2014 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification / IEC 61747-3(2006) 55 IS 15934(Part 3/Sec 1):2014 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells Sec 1: Blank detail specification / IEC 61747-3-1(2006) 56 IS 15934(Part 4):2014 Liquid crystal and solid-state display devices - Part 4: Liquid crystal display modules and cells - Essential / IEC 61747-4(1998) ratings and Characteristics

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 22 -

  • 57 IS 15934(Part 4/Sec 1):2014 Liquid crystal and display devices - Part 4: Matrix colour LCD modules - Section 1: Essential ratings and / IEC 61747-4-1(2004) Characteristics 58 IS 15934(Part 5):2014 Liquid Crystal and Solid-State Display Devices - Part 5: Environmental, endurance and mechanical test methods / IEC 61747-5: 1998 59 IS 15934(Part 6):2014 Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - / IEC 61747-6(2004) Transmissive type 60 IS 15934(Part 10/Sec 1):2016 Liquid Crystal Display Devices - Part 10-1: Environmental, endurance and mechanical test / IEC 61747-10-1 methods - Mechanical 61 IS 16178:2014 Display technologies - LCD, PDP and OLED - Overview and explaination of differences in / IEC/TR 62728:2011 62 IS 16306(Part 1):2016 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications / IEC 62341-1-1:2009 63 IS 60139:2000 Preparation of outline drawings for cathode-ray tubes, Jan 2016 their components, connections and gauges / IEC 60139: 2000 64 IS 61965:2003 Mechanical Safety of Cathode Ray Tubes Dec 2015 / IEC 61965: 2003 FINALISED DRAFTS UNDER PRINT

    1 DOC.LITD 4(3305) Liquid Crystal Display Devices - Part 5-3: Environmental, endurance and mechanical test / IEC 61747-5-3 methods - Glass strength and reliability ASPECT WISE REPORT PRODUCT 5 METHODS OF TEST 24 CODES OF PRACTICES 13 TERMINOLOGY 8 DIMENSIONS 5 SYMBOLS 4 OTHERS 5

    TOTAL : 64

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 23 -

  • LITD 5 SEMICONDUCTOR DEVICES COMPONENTS AND ELECTRONIC ASSEMBLY TECHNOLOGY SCOPE To prepare Indian standards relating to: a) Semiconductor devices & integrated circuits. b) Capacitors, resistrs, allied component c) Discrete semiconductor devices & micro-electromechanical systems d) Electronic assembly technologies and printed board assemblies. c) Piezoelectric and dielectric devices for frequency control and selection. d) Parts and components displaying magnetic properties and ferrite materials e) Capacitors resistors and inductors for use in electronics equipment.

    LIAISON WITH IEC COMMITTEES IEC/TC 40 Capacitors and resistors for electronic equipment. IEC/TC47 Semiconductor devices SC 47A Integrated circuits. SC 47D Mechanical standardization for semiconductor devices. SC 47E Discreet semiconductor devices. SC 47F micro-electromechanical systems IEC/TC91 Electronic assembly technology Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

    1 ISQC 760201 : 1995 Semiconductor devices-integrated circuits - Blank detail Mar 2015 specification for film integrated circuits and hybrid film / IECQC 760201(1991) integrated circuits on the basis of capability approval procedure 2 ISQC 300201 : 2000 Fixed capacitors for use in electronic equipment: Blank Mar 2015 1 detail specification: Fixed tantalum capacitors with / IECQC 300201:1984 solid electrolyte and porous anode - Assessment level 3 ISQC 300300 : 1993 Fixed capacitors for use in electronic equipment: Mar 2015 Sectional specification for aluminium electrolytic / IECQC 300300:1985 capacitors with solid and non-solid electrolyte 4 ISQC 300301 : 1993 Fixed capacitors for use in electronic equipment, Blank Mar 2015 detail specification: Aluminium electrolyte capacitors / IECQC 300301:1985 with non-solid electrolytic - Assessment Level E 5 ISQC 300600 : 1992 Fixed capacitors for use in electronic equipment: Mar 2015 Sectional specification for fixed capacitors of ceramic / IECQC 300600:1988 dielectric, Class 1 6 ISQC 300601 : 1992 Fixed capacitors for use in electronic equipment: Blank Mar 2015 detail specification for fixed capacitors of ceramic / IECQC 300601:1988 dielectric, Class 1 - Assessment level E 7 ISQC 300100 : 1985 Fixed capacitors for use in electronic equipment. Mar 2015 Sectional specification - Fixed polyethylene- / IECQC 300100:1982 terephthalate film dielectric metal foil dc capacitors 8 ISQC 760200 : 1995 Semiconductor devices-integrated circuits-Sectional Mar 2015 specification for film integrated circuits and hybrid film / IECQC 760200(1992) integrated circuits on the basis of capability approval procedure 9 ISQC 300400 : 1988 Fixed capacitors for use in electronic equipment Mar 2015 Sectional specification. Fixed metallized polyethylene- / IECQC 300400:1982 terephthalate film dielectric dc capacitors

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 24 -

  • 10 ISQC 300401 : 1988 Fixed capacitors for use in electronic equipment: Blank Mar 2015 detail specification: Fixed metallized polyethylene- / IECQC 300401:1982 terephthalate film dielectric dc capacitors - Assessment level E 11 ISQC 001002 : 2000 IEC quality assessment system for electronic Mar 2015 components (IECQ) - Rules of procedure Part 1: / IECQC 001002-1:1998 Administration (First revision) 12 ISQC 300200 : 2000 Fixed capacitors for use in electronic equipment; Mar 2015 2 Sectional specification: Fixed tantalum capacitors with / IECQC 300200:1982 non-solid or solid electrolyte 13 ISQC 300000 : 1988 Fixed capacitors for use in electronic equipment - Mar 2015 Generic specification / IECQC 300000:1982 14 ISQC 300800 : 1994 Fixed capacitors for use in electronic equipment, Mar 2015 Sectional specification for fixed tantalum chip capacitors / IECQC 300800:1989 15 ISQC 001001 : 2000 IEC quality assessment system for electronic Mar 2015 components (IECQ) - Basic Rules (First revision) / IECQC 001001:1998 16 ISQC 410101 : 1992 Potentiometers for use in electronic equipment Blank Mar 2015 Detail specification - Lead screw actuated and rotary / IECQC 410101:1989 preset potentiometers - Assessment level E 17 ISQC 400100 : 1988 Fixed resistors for use in electronic equipment: Mar 2015 Sectional specification for fixed low-power non-wire- / IECQC 400100:1982 18 ISQC 001002 : 2000 IEC quality assessment system for electronic Mar 2015 components (IECQ) - Rules of procedure Part 3: / IECQC 001002-3:1998 Approval Procedures (First revision) 19 ISQC 001002 : 2000 IEC quality assessment system for electronic Mar 2015 components (IECQ) - Rules of procedure Part 2: / IECQC 001002-2:1998 Documentation (First revision) 20 ISQC 760000 : 1994 Semiconductor devices - Integrated circuits - Generic Mar 2015 specification for film integrated circuits and hybrid film / IECQC 760000:1988 integrated circuits 21 ISQC 790130 : 1995 Semiconductor devices-integrated circuits, Digital Mar 2015 integrated circuits, Blank detail specification for / IECQC 790130(1992) HCMOS digital integrated circuits (series 54/74 HC, 54/74 HCT, 54/74 HCU) 22 ISQC 750108 : 1992 Semiconductor devices, discrete devices: Part 2 Mar 2015 Rectifier diodes section 1, Blank detail specification for / IECQC 750108:1989 rectifier diodes (including avalanche rectifier diodes) ambient and case-rated up to 100 A 23 ISQC 750102 : 1989 Semiconductors devices Discrete devices, Bipolar Sep 2014 transistors Blank detail specification for ambient rated / IECQC 750102:1986 bipolar transistors for low and high frequency amplification 24 ISQC 750111 : 1994 Semiconductor devices - Discrete devices - Bipolar Mar 2015 transistors - Blank detail specification for bidirectional / IECQC 750111:1991 triode thyristors (triacs) ambient or case-rated 100 A 25 ISQC 750107 : 1994 Semiconductor devices - Discrete devices - Bipolar Mar 2015 transistors - Blank detail specifications for case-rated / IECQC 750107:1991 bipolar transistors for high frequency applications 26 ISQC 790202 : 1993 Semiconductor devices - Discrete devices - Bipolar Mar 2015 transistors - Blank detail specifications for monolithic / IECQC 790202:1991 integrated operational amplifiers 27 ISQC 760100 : 1995 Semiconductor devices-integrated circuits-Sectional Mar 2015 specification for film integrated circuits and hybrid film / IECQC 760100(1991) integrated circuits on the basis of qualification approval procedure

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 25 -

  • 28 ISQC 300700 : 1994 Fixed capacitors for use in electronic equipment: Mar 2015 Sectional specification for fixed capacitors of ceramic / IECQC 300700:1988 dielectric, Class 2 29 ISQC 790131 : 1995 Semiconductor devices-integrated circuits, Digital Mar 2015 integrated circuits, Blank detail specification for / IECQC 790131(1992) complementary MOS digital integrated circuits (series 4 000 B and 4 000 UB) 30 ISQC 300701 : 1993 Fixed capacitors for used in electronic equipment: Mar 2015 Blank detail specification for fixed capacitors of / IECQC 300701:1988 ceramic dielectric, Class 2 - Assessment level E 31 ISQC 790132 : 1995 Semiconductor devices-integrated circuits, Digital Mar 2015 integrated circuits, Blank detail specification for bipolar / IECQC 790132(1991) monolithic digital integrated circuit gates (excluding uncommitted logic arrays) 32 ISQC 720100 : 2001 Semiconductor devices, Sectional specification for opto Feb 2014 electronics devices / IECQC 720100:1991 33 ISQC 750104 : 1993 Semiconductor devices - Discrete devices - Bipolar Mar 2015 transistors - Blank detail specifications for Bipolar / IECQC 750104:1991 transistors for switching applications 34 ISQC 001003 : 2000 IEC quality assessment system for electronic Mar 2015 components (IECQ) - Guidance documents (First / IECQC 001003:1998 revision) 35 ISQC 390101 : 1993 Blank detail specification for fixed film resistors Mar 2015 networks of assessed quality on the basis of capability / IECQC 390101:1991 approval procedure. Assessment level E 36 ISQC 300801 : 2000 Fixed capacitors for use in electronic equipment - Blank Mar 2015 detail specification for fixed tantalum chip capacitors - / IECQC 300801:1989 Assessment level E 37 ISQC 410000 : 2000 Potentiometers for use in electronic equipment - Mar 2015 1 Generic specification / IECQC 410000:1989 38 ISQC 760101 : 1995 Semiconductor devices-integrated circuits Blank detail Mar 2015 specification for film integrated circuits and hybrid film / IECQC 760101(1991) integrated circuits on the basis of qualification approval procedure 39 ISQC 400500 : 1993 Sectional specification for fixed resistor networks in Mar 2015 which not all resistors are individually measurable / IECQC 400500:1984 40 ISQC 420102 : 1993 Blank detail specification for zinc oxide surge Mar 2015 suppression varistors - Assessment level E / IECQC 420102:1991 41 ISQC 440000 : 1994 Generic specification for directly heated positive step Mar 2015 function temperature coefficient thermistors / IECQC 440000:1982 42 ISQC 420101 : 1994 Blank detail specification for silicon carbide surge Mar 2015 suppression varistors - Assessment level E / IECQC 420101:1991 43 ISQC 420100 : 1994 Varistors for use in electronic equipment: Sectional Mar 2015 specification for surge suppression varistors / IECQC 420100:1991 44 ISQC 420000 : 1994 Varistors for use in electronic equipment: Generic Mar 2015 specification / IECQC 420000:1991 45 ISQC 400601 : 1993 Blank detail specification for fixed chip resistors Mar 2015 / IECQC 400601:1989

    * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS - 26 -

  • 46 ISQC 750105 : 1994 Semiconductor devices, discrete devices: Mar 2015 Signal(including switching) & regulator diodes, Blank / IECQC 750105:1986 Detail spec for voltage regulator diodes & voltage- reference diodes, excluding temperature-compensated precision reference diodes 47 ISQC 400600 : 1994 Sectional specification for fixed chip resistors Mar 2015 / IECQC 400600:1989 48 ISQC 440001 : 1993 Blank detail specification for directly heated positive Mar 2015 step function temperature coefficient thermistors - / IECQC 440001:1982 Assessment level E 49 ISQC 400402 : 1993 Blank detail specification: Fixed resistor networks with Mar 2015 individually measurable resistor of either different / IECQC 400402:1983 resistance values or different rated dissipations - Assessment level E 50 ISQC 400401 : 1994 Blank detail specification for fixed resistor networks Mar 2015 with individually measurable resistors all of equal value / IECQC 400401:1983 and equal dissipation - Assessment level E 51 ISQC 400400 : 1994 Sectional specification for fixed resistor networks with Mar 2015 individually measurable resistors / IECQC 400400:1983 52 ISQC 400301 : 1992 Fixed resistors for use in electronic equipment. Blank Mar 2015 detail specification for fixed precision resistors - / IECQC 400301:1983 Assessment Level E 53 ISQC 400300 : 1992 Fixed resistors for use in electronic equipment, Mar 2015 Sectional specification: Fixed precision resistors / IECQC 400300:1982 54 ISQC 400200 : 1992 Fixed resistors for use in electronic equipment. Mar 2015 Sectional specification: Fixed power resistors / IECQC 400200:1982 55 ISQC 400501 : 1994 Blank detail specification for fixed resistor networks in Mar 2015 which not all resistors are indi