e-100-a and e-100-l-a - applied products tpgapplied-tpg.com/media/8499/e_100_a_e_100_l_a_ds.pdf ·...
TRANSCRIPT
H56829 2/12 www.tycothermal.com 1 of 3
1. Self- Regulat- ing Cables
14. Index2. Pow
er- Lim
iting Cables
3. Mineral
Insulated Cables
4. Longline Heating
5. Tubing Bundles
6. Tank Heating
7. Snow and
Ice8. Control and
Monitoring
9. Heat-Trace Panels
10. Engineered Products
11. Steam-
Tracing System
s
12. Technical Data Sheets
13. Appendixes
E-100-A and E-100-L-A
Visit www.tycothermal.com for more information on our ten-year extended warranty.
End seal and lighted end seal kits
The E-100-A and E-100-L-A serve as above-insulation end seal kits for Raychem brand BTV, QTVR, XTV, KTV, or VPL heating cables. They are approved by FM and CSA for use in hazardous locations.
Both the E-100-A and the E-100-L-A are mounted on the pipe and project through the thermal insulation and cladding for ease of maintenance. The E-100-L-A end seal with signal light uses an array of bright LEDs for exceptional visibility and long product life.
These rugged end seals are made from high-performance engineering polymer and resist impact, high temperature, and chemical and UV exposure. The stand allows for up to four inches (100 mm) of thermal insulation. The encapsulated light and boot reliably prevent moisture and dust ingress. The industrial-grade electronics used in the E-100-L-A are encapsulated.
Both the E-100-A and E-100-L-A are re-enter-able, allowing easy access for testing. Voltage
and continuity checks can be done by simply unscrewing the E-100-A cap and removing the reusable sealing boot. The E-100-L-A makes maintenance even easier by allowing for visual inspection of heating circuit continuity. The E-100-L-A is available in two voltages and can be retrofitted into previously installed E-100-A end seals. The light module is replaceable.
The kits contain all the necessary materials for a complete installation except for one pipe strap, which must be ordered separately.
E-100-A E-100-L-A
E-100-A E-100-L-A
Description Above-insulation end seal, cold-applied Above-insulation end seal with red signal light, cold-applied*Not for use with 480 V VPL
Kit Contents
Note: Order appropriate pipe strap separately (one per kit)
1 end seal 1 end seal with red indicator light
E-100-A AND E-100-L-A
2 of 3 www.tycothermal.com H56829 2/12
E-100-A E-100-L-A
ApprovalsClass I, Div. 2, Groups A, B, C, DClass II, Div. 1 and 2, Groups E, F, GClass III
CLI, ZN1, AEx e II T(2)
Hazardous Locations
(1)
(1) Except VPL(2) For T-rating, see heating cable or design documentation
Ex e II T(2) Ex em II T(2)
Class I, Div. 2, Groups A, B, C, DClass II, Div. 1 and 2, Groups E, F, GClass III
CLI, ZN1, AEx em II T(2)
Hazardous Locations
(1)
IECEx PTB 09.0038UEx e ll Ex tD A21 IP66
IECEx PTB 09.0038UEx emb llEx tD mbD A21 IP66
09-IEx-0004XBR-Ex e II
-ws
-ws
-ws
-ws
09-IEx-0004XBR-Ex e II
E-100-A E-100-L-A
Product Specifications
Heating cable capability BTV-CR, BTV-CT, QTVR-CT, XTV-CT, KTV-CT and VPL-CT
Ingress protection NEMA 4X (IP65) NEMA 4X (IP65)
Minimum installation temperature –40°F (–40°C) –40°F (–40°C)
Minimum ambient temperature –75°F (–60°C) –40°F (–40°C)
Maximum ambient temperature 132°F (56°C) 104°F (40°C)
Maximum pipe temperature 500°F (260°C) 500°F (260°C)
Maximum operating voltage 480 Vac 120 / 277 Vac
Overall height 7 in (175 mm) 8 in (200 mm)
Outer diameter at insulation 2.0 in (50 mm)Usable with up to 4 in (100 mm) thermal insulation
3 in (75 mm)
Materials High-performance glass-filled engineered polymer
High-performance glass-filled engineered polymer
Light source Super-bright light-emitting diodes (LEDs), red
Light source power supply Not applicable Linear (nonswitching)
Power consumption 0 W < 2 W
Ordering Details
End seal
Catalog number E-100-A (100–480 Vac)
E-100-L1-A (100–120 Vac)
E-100-L2-A (200–277 Vac)
Part number 046567-000 583377-000 478767-000
Weight 0.6 lb (272 g) 1.3 lb (630 g) 1.3 lb (630 g)
Spare boot pack for E-100
Catalog number E-100-BOOT-5-PACK
Part number 281053-000
Pack weight 0.25 lb (140 g)
Pack contents Five sealant-filled boots and five cable ties
E-100-A AND E-100-L-A
H56829 2/12 www.tycothermal.com 3 of 3
1. Self- Regulat- ing Cables
14. Index2. Pow
er- Lim
iting Cables
3. Mineral
Insulated Cables
4. Longline Heating
5. Tubing Bundles
6. Tank Heating
7. Snow and
Ice8. Control and
Monitoring
9. Heat-Trace Panels
10. Engineered Products
11. Steam-
Tracing System
s
12. Technical Data Sheets
13. Appendixes
Ordering Details
End seal
Replacement indicator light for E-100-LXX-A
Catalog number E-100-LR1-A (100–120 Vac)
E-100-LR2-A (200–277 Vac)
Part number 552225-000 874485-000
Weight 0.9 lb (450 g) 0.9 lb (450 g)
© 2
012
Tyc
o Th
erm
al C
ontro
ls L
LC
Important: All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their particular application. Tyco Thermal Controls makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Thermal Controls' only obligations are those in the Tyco Thermal Controls Standard Terms and Conditions of Sale for this product, and in no case will Tyco Thermal Controls or its distributors be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Thermal Controls reserves the right to make changes—without notification to Buyer—to processing or materials that do not affect compliance with any applicable specification.
Worldwide HeadquartersTyco Thermal Controls7433 Harwin DriveHouston, TX 77036USATel: 800-545-6258Tel: 650-216-1526Fax: 800-527-5703Fax: [email protected]
Europe, Middle East, AfricaTyco Thermal ControlsRomeinse straat 143001 LeuvenBelgië / BelgiqueTel: +32 16 213 511Fax: +32 16 213 603
CanadaTyco Thermal Controls250 West St.Trenton, Ontario K8V 5S2CanadaTel: 800-545-6258Fax: 800-527-5703Tel: 613-392-6571Fax: 613-392-3999
Latin AmericaTyco Thermal ControlsAl. Araguaia, 2044 – Sala.1101, Bloco BEdificio CEA – AlphavilleBarueri – Sao Paulo – Brasil06455-000Tel: +55 11 2588 1400Fax: +55 11 2588 1410
Asia PacificTyco Thermal Controls20F, Innovation Building,1009 Yi Shan Rd,Shanghai 200233, P.R.ChinaTel: +86 21 2412 1688Fax: +86 21 5426 2937 / 5426 3167
Tyco, Alliance Integrated Systems, AMC, AutoMatrix, AutoSol, BTV, CapaciSense, Chemelex, DHSX, DigiTrace, DigiTrace logo, DigiTrace Supervisor, Duoterm, ElectroMelt, EM2XR, FHSM, FHSC, FlexFit, FlexiClic, Flowguard, FreezeTrace, FreezGard, Frostex, Frostex Plus, Frostguard, FroStop, FSE, Gardian, HAK, Handvise, HBTV, HCCL, HotCap, HQTV, HTPG, HTPI, HWAT, HXTV, IceStop, Interlock, Isocable, Isodrum, Isoheat, Isomantle, Isopad, Isopad Frostguard, Isopad logo, Isopanel, Isotape, Isotherm, JBM, JBS, K-Flex, K-Flex logo, KHE, KHH, KHL, KHP, KTV, Labsafe, LBTV, LHC, LHFV, LHRV, Metabond, Mini WinterGard, Miser WinterGard, MoniTrace, Multi-plus, NGC, PetroTrace, PLI, PolyMatrix, Pyro CiC, PyroFLX, Pyromaster, Pyropak, Pyrosil, PyroSizer, Pyrotenax, Pyrotenax Designer, Pyrotenax logo, QTVR, QuickNet, QuickNet logo, QuickStat, QuickTerm, RayClic, RaySol, RayStat, Retro WinterGard, RHS, RHSC, RHSM, RMM2, SBF, SBV, SC, SHC, Sheathmaster, ShowerGuard, SLBTV, Smart Heat for Comfort and Safety, SnoCalc, SnoCalc logo, STS, System 500, System 1850, System 1850-SE, System 2000, System 2200, T2, T2 logo, T2Blue, T2QuickNet, T2Red, T2Reflecta, TankCalc Plus, TempBus, Thermoheat, ThermoLimit, Thermo-Line, Total Care in Heat-tracing, Touch, Trac-Loc, Trac Calc, TraceCalc Net, TraceCalc Net logo, TraceCalc Pro logo, TraceGuard 277, TraceMaster, Tracer, Tracer logo, TRACERLYNX, TRACERLYNX logo, TraceStat, TraceTek, TraceTek logo, TruckPak, VLBTV, VLKTV, VPL, We manage the heat you need, WinterGard, WinterGard logo, WinterGard Plus, WinterGard Wet, XL-ERATE, XL-ERATE logo, XL-Trace, XTV and Zero EMI are registered and/or unregistered trademarks of Tyco Thermal Controls LLC or its affiliates.
All other trademarks are the property of their respective owners.