dynamic data acquisition 3d measurements before, during, & after testing in both ambient or...
TRANSCRIPT
LOCATED AT BOOTH: 8070 (PRIMETIME TESTING LAB)
Dynamic Data Acquisition3D Measurements before, DURING, & after testing
In both ambient or extreme climatic conditions
DYNAMIC - Of or relating to physical force, energy, movement.Dynamic. 2011. In Merriam-Webster.com Retrieved October 13, 2011, from http://www.merriam-webster.com/dictionary/dynamic
DATA - Information output by a sensing device or organ that includes both useful and irrelevant or redundant information and must be processed to be meaningful.
Data. 2011. In Merriam-Webster.com Retrieved October 13, 2011, from http://www.merriam-webster.com/dictionary/data
DYNAMIC DATA ACQUISITION – The act of acquiring data DURING a products change of attributes.
What is “Dynamic Data Acquisition”?
Privately held company specializing in the acquisition of dynamic point data Strategic Alliance with Primetime Testing Laboratory, Inc. Expert team in data acquisition (over 20 years)
Authorized service provider of AICON 3D Measurement productts
Who Is DIS?
Where Are We?Centrally located 30 minutes east of Detroit.
22832 Macomb Industrial Drive
Clinton Township, Michigan 48036
What does DIS offer?
3D Measurement Service for engineering and manufacturing industries
Dynamically Measure components during extreme climate conditions
Dramatically Improve testing efficiency
Reduce development time and cost
Today’s Traditional Environmental Testing Process
Coordinate measurement machine (CMM)
First measure the part using a CMM
Run it through an environmental profile
Measure the part after a CMM
Compare Before and After point data
What The Traditional Method Misses?
Unable to identify part change during an environmental test
Falls short to pinpoint root cause when a part fails Breakage during test Part deformation at extreme temp Do not know time, temperature, or humidity at each measurement
The traditional method is costly and time consuming Labor Intensive Inhibits development timing of bringing product to market
What is the DIS Process?
ChamberCam™
What Does ChamberCam™ Provide?
Measures part deformation during an environmental test
Obtain 3D point data and analysis
Records Time, Temp, and Humidity each measurement
Measurements up to 15 times per second
Accuracy of 50 microns
How ChamberCam™ Will Help You
Improve discovery time of root cause analysis
ChamberCam™ provides previously unobtainable data
Time, temperature, humidity, and 3D point data
Captures dimensional data at hundreds of points
Image for every measurement taken
Easy to analyze and create / present data
Application Areas Instrument Panels Door panels Headliners Seats Center Consoles Armrests Visors Exterior Engine and Performance
Application Areas: ChamberCam™ Instrument Panels Door panels Headliners Seats Center Consoles Armrests Visors Exterior Engine and Performance
Application Areas: MoveInspect Instrument Panels Door panels Headliners Seats Center Consoles Armrests Visors Exterior Engine and Performance
Instrument Panels Door panels Headliners Seats Center Consoles Armrests Visors Exterior Engine and Performance
Application Areas: MoveInspect
VIDEO SAMPLES
What You Get From Testing
3D Image overview of measured point data Image for every measurement taken 3D deformation table of measured point trajectories Information pins or graphs for selected measured points 3D data available to input into CAD Video of measurements and their deformations Free viewer to analyze data
What will the DIS process do? Redefine Industry Process & Standard
No need for traditional CMM services for pre/post measurements Dramatically improve the time to make engineering/design evaluations
and decisions Acquire measurable point data while part is static or moving Change Test Specifications and Procedures
LOCATED AT BOOTH: 8070 (PRIMETIME TESTING LAB)