dvb-t/t2 low power transmitter - home - · pdf file• regenerative transmitter to achieve...
TRANSCRIPT
Up to 35 % Efficiency
Discover Plisch Low Power TransmittersPlisch Low Power Transmitters offer a unique compact design, available in UHF and VHF with power classes from 5 W to 600 W. Available with Doherty Technology, reduce your energy costs and save space with a Plisch Low Power Transmitter.
For a future roll-out of a DVB Network or to cover difficult signal areas, we also offer the following essential solutions:
• Multistandard Repeater with Echo Canceller for Single Frequency Network
• Regenerative Transmitter to achieve the highest signal quality
KEY FEATURES • DVB T/T2, optional with DVB-T2-Lite
• Available with Doherty Technology
• Digital Adaptive Pre-correction (DAP)
• Simple Operation and Maintenance
• Front Exchange of Blowers / Air Filters
• Seamless Switching (2x TSoIP and 2x ASI)
• Integrated GPS Receiver
• All Reserve Systems Available
• Remote Management via Web Interface or SNMP
DVB-T/T2 Low Power Transmitter
T2V 4200 Product Line
T2V 4262: up to 600 W
ThE TransmiTTEr ComPany
T2V 4203: up to 300 WT2V 4202: up to 150 W
5 W to 600 W
V01.00
Specifications
© 2014 All rights reserved.
max. output power before filter
T2V 4202b: 50 W
T2V 4202a: 150 W
T2V 4203: 300 W
T2V 4262 (T2V 4203 with 300W booster): 600 W
General Data
Standard DVB-T2, DVB-T
Frequency range UHF Band IV/V (470 to 862 MHz)
Network types MFN, SFN
Shoulder distance > 37 dB
MER > 34 dB
Frequency accuracy < 3 x 10-8/year (free run)
Output power stability < ± 0.1 dB
Mains supply 230 V, ± 15% or DC (24V to 72 V)
External fuse protection (including cooling) 16 A (standard)
Wire cross section (recommended) 3 x 1.5 mm2 (standard)
RF output N (standard)
Operating temperature +5°C to +45°C (-5°C to +45°C with mixing chamber)
Storage temperature -10°C to +50°C
Acoustic sound level< 63 dB (A) (1m away from front and 1.5m up from the floor)
Equivalent Noise Degradation (END) < 1 dB
Humidity max. 95% non-condensing
Altitude max. 2000 m
Dimensions (W x H x D)
T2V 4202: 483 x 87 x 553 mmT2V 4203: 483 x 134 x 553 mmT2V 4262: 483 x 270 x 553 mm
WeightT2V 4202: approx. 13 kgT2V 4203: approx. 14.5 kgT2V 4262: approx. 35 kg
Time interleave up to 500kcells/PLP
Integrated GPS receiver optional
Adaptive precorrection included
Control
Connection 2x RJ45 10/100 Base T (1x local, 1x remote)
Protocol TCP/IP v4, v6 SNMP v1, v2, v3 HTTP
input Parameters
Inputs
2 x ASI-TS input, 75 Ω seamless switching 2 x IP stream input seamless switching1 x External 10 MHz reference input 1 x External 1 PPS reference input1 x GPS reference input (optional)
Input process Input mode A (single PLP) Input mode B (multiple PLP, T2-MI)
modulation in DVB-T2 mode
In acc. with ETSI EN 302 755, TS 102 831, T2-MI
Coding 1k, 2k, 4k, 8k, 16K, 32K
Modulation QPSK, 16QAM, 64QAM, 256QAM
Guard interval 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4
FEC 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Transmission mode SISO, MISO
Time interleaver up to 500 kcells per PLP
Channel bandwidth 5, 6, 7, 8 MHz
T2 Version 1.1.1, 1.2.1, 1.3.1-Base, 1.3.1-Lite (optional)
modulation in DVB-T mode
In acc. with ETSI EN 300 744 (all modes)
Coding 2K, 4K, 8K
Modulation QPSK, 16QAM, 64QAM
Guard interval 1/32, 1/16, 1/8, 1/4
FEC 1/2, 2/3, 3/4, 5/6, 7/8
Hierarchical mode α = 1, 2, 4
Inner interleaver Native/in-depth
Channel bandwidth 5, 6, 7, 8 MHz
TPS signalisation DVB-T or DVB-T/H
DVB-H features in depth interleaving, timeslicing MPE-FEC
Test ports at front panel
RF test port SMA, 50 W
TS test port BNC, 75 W
10 MHz test port BNC, 50 W
1 PPS test port BNC, 50 W
PLiSch Gmbh i GRoSSER STELLWEG 13 i 68519 VIERNHEIM i GERMANy i PHoNE: +49 6204 707- 0 i WEB: WWW.PLISCH.DE