dunless otherwise specified all dimensions · dunless otherwise specified all dimensions sheet...

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 A A B B C C D D .XX .02 .XXX .005 .XXXX .0005 ANGLES .5 1 of 1 D Sheet Date: Revised: Date: Drawn: ARE IN INCHES AND TOLERANCES ARE: UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS DOCUMENT DO NOT SCALE THIS Scale: Description: GENERAL ASSEMBLY 8.7HP DX CLAW VAC MOD 200G RECEIVER STANDARD AND O2 ASSURED MDB 05/31/2019 JDY 11/01/2010 BEACONMEDÆS 4107 8513 14 Part Number: Rev: 01 DN: BM190346 Notes: 1. DISCHARGE MUFFLER WILL BE SHIPPED LOOSE. 2. DX MODULE WEIGHT: 1,815 LBS 200G TANK WEIGHT: 618 LBS 3. INDICATES LIFTING POINT. 4. DENOTES CENTER OF GRAVITY. INSPECTION CHECKLIST UNLESS OTHERWISE SPECIFIED: ALL ITEMS MARKED BY ONE OF THE ABOVE SYMBOLS ARE TO BE INSPECTED EQUIPMENT TO BE USED DURING RECEIVING INSPECTION SHALL BE PER QUALITY SYSTEM PROCEDURES is loaned without the expressed written permission from BeaconMedæs Engineering. BeaconMedæs and may not be used for other than the purpose for which it This drawing and the information contained thereon remain the property of Form F-007 Rev. 01 200 GAL VACUUM RECEIVER 2" FLANGED CONNECTIONS (SCALE 1:10) RECEIVER BYPASS VALVE HOSPITAL CONN 2" FLANGE 24.00 24.00 24.00 36.00 9.25 34.00 1.50 TYP 9.83 I 55.58 D & C REMOVE INTAKE MANIFOLD BEFORE LIFTING 16.25 31.50 34.23 25.09 28.04 52.50 68.80 INTEGRATED LIFTING EYES 3.73 C 46.59 D 60.39 I DISCHARGE 2" FLANGE SYSTEM CONNECTIONS ID DESCRIPTION I INLET LOCATION D DISCHARGE LOCATION C CONDENSATE DRAIN LOCATION T TANK DRAIN INLET FILTER PER PUMP 30.00 5.66 T 45.50 OUTLET 2" FLANGE INLET 2" FLANGE 51.19 21.50 81.97 17.50 41.60 MINIMUM CLEARANCE FOR MAINTENANCE & VENTILATION MANUAL DRAIN CONN 1/2" NPT (FEMALE) 0.75 BOLTDOWN (4 PLACES) 10.31 ELECTRICAL CONNECTION CONTROL CABINET MANUAL CONDENSATE DRAIN 0.69 X 1.06 SLOT Ø26.00 B.C. EQUALLY SPACED (4 PLACES)

Upload: others

Post on 22-Aug-2020

8 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: DUNLESS OTHERWISE SPECIFIED ALL DIMENSIONS · DUNLESS OTHERWISE SPECIFIED ALL DIMENSIONS Sheet Revised: Date: Drawn: Date: ARE IN INCHES AND TOLERANCES ARE: DOCUMENT DO NOT SCALE

A A

B B

C C

D D

.XX .02

.XXX .005.XXXX .0005ANGLES .5

1 of 1

Sheet

Date:Revised: Date: Drawn:

ARE IN INCHES AND TOLERANCES ARE:UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS

DOCUMENTDO NOT SCALE THIS

Scale:

Description:

GENERAL ASSEMBLY 8.7HP DXCLAW VAC MOD 200G RECEIVER

STANDARD AND O2 ASSURED

MDB 05/31/2019 JDY 11/01/2010

BEACONMEDÆS

4107 8513 14Part Number:

Rev:01

DN:BM190346

Notes: 1. DISCHARGE MUFFLER WILL BE SHIPPED LOOSE. 2. DX MODULE WEIGHT: 1,815 LBS 200G TANK WEIGHT: 618 LBS 3. INDICATES LIFTING POINT. 4. DENOTES CENTER OF GRAVITY.

INSPECTION CHECKLISTUNLESS OTHERWISE SPECIFIED:

ALL ITEMS MARKED BY ONE OF THE ABOVE SYMBOLS ARE TO BE INSPECTED EQUIPMENT TO BE USED DURING RECEIVING INSPECTION SHALL BE PER QUALITY SYSTEM PROCEDURES

is loaned without the expressed written permission from BeaconMedæs Engineering.BeaconMedæs and may not be used for other than the purpose for which itThis drawing and the information contained thereon remain the property of

Form F-007 Rev. 01

200 GAL VACUUM RECEIVER2" FLANGED CONNECTIONS

(SCALE 1:10)

RECEIVER BYPASSVALVE

HOSPITAL CONN2" FLANGE

24.00

36.00

9.25 34.001.50TYP

9.83I55.58D & C

REMOVE INTAKE MANIFOLDBEFORE LIFTING

16.25

31.50