Dial-Up Networking Setup------------------------To setup dial-up networking for connection to the Internet -1. Click Start|Settings|Control Panel2. Double click the Add/Remove Programs icon3. Click the Windows Setup tab4. Select Communications5. Click Details6. Check the Dial-Up Networking box7. Click OK and OK again8. If you are prompted for a Workgroup or Computer name type "Default" and "Group" respectively then click Close You may need you Windows CD or disks to complete the installation.After you have restarted your computer you will need to configureDial-Up Networking.9. Click Start|Settings|Control Panel10. Double click the Network icon11. Select IPX/SPX-compatible and click Remove12. Select NetBEUI and click Remove13. Click Add14. Select Protocol and click Add15. Select Microsoft in the Manufacturers window16. Select TCP/IP in the Network Protocols window17. Click OK and OK againYou may need your Windows CD or disks at this stage. You will need torestart your computer for the changes to take effect.Once your computer has been restarted, re-run the CD.