ducting adss duplex - emtelle
TRANSCRIPT
Excellent rodent resistance
Max rated design tension up to 1.5 kN
100% waterproof
The smallest diameter
Perfect solution for multi-dwelling units
Easy access to the fiber at any place of the cable
Up to 48 fibers
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers
Max rated design tension up to 40 kN
Excellent rodent resistance
All-dielectric design
Cost-effective designExcellent rodent resistance
Reduced weight and size
Up to 24 fibers
Superior blowing solutionsIdeally suited to Emtelle microducts
Blowing CT FibreFlow
FibreFlow
12f Ø2.4 mm
up to 48f (4×12) Ø3.6 mm up to 72f (6×12) Ø4.4 mmup to 96f (8×12) Ø5.1 mmup to 288f (24×12) Ø7.9 mm
Blowing MT
5/3.5 & 7/3.5 & 7/4
10/610/6 & 10/8 & 12/810/8 & 12/8 & 12/10 & 14/1014/10 & 14/12 & 16/12 & 18/14 & 20/15
Tested &
approved
undergo regular quality tests at our specially equipped test sites
are created and certified to use with Emtelle microducts
Discover all Emcab’s Blowing cables
See our blowing tracks
Use our free software to select the complete package for blowing technology
are proven to deliver an optimum blowing performance
is a brand new optical cable manufacturer, operating all over the world.
Max rated design tension up to 2.7 kN
Max rated design tension up to 2.7 kN
Reduced weight and size
All-dielectric design
All-dielectric design
Easy to install
Easy to install
Easy to install
Max rated design tension up to 1.2 kN
Easy strippable tubes
Suitable for aerial installation
All-dielectric design Max rated design tension up to 2.7 kN
Max rated design tension up to 2.7 kN
Max rated design tension up to 0.7 kN
Max rated design tension up to 2.7 kN
Max rated design tension up to 7 kN
Cost-effective design
Cost-effective design
Excellent rodent resistance
Excellent rodentresistance
Reduced weight and size
Reduced weight and size
Cost-effective designCost-effective design
Cost-effective design
Cost-effective design
Excellent rodent resistance
Excellent rodent resistance
Excellent rodent resistance
Excellent rodent resistance
Reduced weight and size
Reduced weight and size
Reduced weight and size Reduced weight
and size
Up to 24 fibers
Up to 24 fibers
Up to 48 fibers
Up to 48 fibers
Up to 432 fibers
Max rated design tension up to 2.7 kN
Max rated design tension up to 2.7 kN
All-dielectric design Fiberglass yarns prevent damage by rodents
Max rated design tension up to 2.7 kN
DuctingDucting CT CST Light
Ducting MT CST Light
Ducting MT FiberGlass
Ducting MT Aramid
Ducting MT FiberGlass DJ
Ducting HCF 864
Ducting MT HFC 432
Ducting MT CST
Ducting CT GSW
Ducting MT CST DJ
Direct Burial SST
Ducting MT FiberGlass SoftTubes
All-dielectric design
Easy to install
Max rated design tension up to 4 kN
Up to 864 fibers
All-dielectric design
Direct BurialDirect Burial CT CST Light
Direct Burial MT CST Light
Direct Burial MT CST DJ
Direct Burial MT CST
Direct Burial CT GSW2 Direct Burial MT FRP2
Direct Burial MT GSW Special
Direct Burial MT GSW2 Special
Direct Burial CT FRP2
Direct Burial SST GSW
Direct Burial CT GSW
Direct Burial CT FRP
Direct Burial MT FRP
Direct Burial MT GSW
Improved reliability due to inner jacketing
Excellent rodent resistance
Excellent rodent resistance
Cost-effective design
Up to 24 fibers
All-dielectric design
Excellent rodent resistance
Up to 24 fibers
Max rated design tension up to 8 kN
Reliable protection from serious mechanical impact
Max rated design tension up to 80 kN (using rope wire)
Reduced weight, suitable for aerial installation
Excellent rodent resistance
Excellent rodent resistance
All-dielectric design
Max rated design tension up to 20 kN
Excellent rodent resistance
Max rated design tension up to 1.5 kN
The smallest diameter
Improved reliability due to inner jacketing
Excellent rodent resistance
Max rated design tension up to 2.7 kN
Suitable for harsh environment applications
Excellent rodent resistance
Up to 24 fibersMax rated design tension up to 50 kN
All-dielectric design
Reduced weight and size
Suitable for application in harsh environments
Max rated design tension up to 30 kN
Certified as CPR compliant Euroclass Dca
Up to 96 fibers
Max rated design tension up to 40 kN
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers
Max rated design tension up to 80 kN (using rope wire)
Excellent rodent resistance
Direct Burial MT GSW2
Max rated design tension up to 80 kN
Aluminum polymer jacket protects the cable core from moisture
Excellent solution for wetland and cross-river installation
Max rated design tension up to 80 kN
Aluminum polymer jacket protects the cable core from moisture
Excellent solution for wetland and cross-river installation
Suitable for application in harsh environments
SubmarineSubmarine CT GSW2
Submarine SST GSW2
Installation down to 5000 m
Installation down to 2500 m
Suitable for application in harsh environments
Suitable for application in harsh environments
Up to 96 fibers
Up to 24 fibers
ADSS
ADSS Flat Type Micro
ADSS FiberGlass DJ
Distribution TB
Distribution MT
Simplex
Duplex
Distribution Fire Rated
ADSS Defender
Applied as ‘the last mile’ in cottage villages
Reduced weight and sizeCost-effective design
Max rated design tension up to 1.2 kN
Easy strippable micro tubes
ADSS FiberGlass Soft Tubes
ADSS Aramid
ADSS FiberGlass
ADSS Aramid DJ
Aerial installation on distribution and transmission lines up to 35 kV
Low susceptibility to ice and wind loads
Application up to 10 kNwith span lengthsup to 200 m
Max rated design tension up to 10 kN
Reduced weight and size
Max rated design tension up to 10 kN
Cost-effective designAerial installation on distribution and transmission lines up to 35 kV
Aerial installation on distribution and transmission lines up to 35 kV and above
The most reliable among ADSS cables. Double tensile strength
Max rated design tension up to 100 kN
Max rated design tension up to 15 kN
Aerial installation on distribution and transmission lines up to 35 kV and above
Optical ground wire (OPGW) shields high-voltage conductors from lightning strikes
Completely protected from water ingress. Anti-rodent additive in the outer jacket for first-line protection
Max rated design tension up to 20 kN
Superior protection from mechanical damage — FRP rods provide strength and second-line protection
Indoor
Riser TB
Riser MT
Perfect solution for multi-dwelling units
Easy access to fiber at any place of the cable
High density of fibers makes it possible to bundle up to 24 fibers into micro loose tubes and place up to 48 micro loose tubes in a cable
Certified as CPR compliant Euroclass Dca
Certified as CPR compliant Euroclass Dca
Flame-retardant
Perfect solution for offices and data centers
Easy termination
More flexible compared to Riser Cable
Up to 48 fibers
High density of fibers makes it possible to bundle up to 24 fibers into micro loose tubes and place up to 48 micro loose tubes in a cable
Flame-retardant
Flame-retardant
Compact and flexibleCable can be terminated with a standard connector
Flame-retardant
Compact and flexiblePerfect solution for patch cords manufacturing
All-dielectric designRemains functional under direct flame for at least 180 minutes
Up to 24 fibers
DropFlat Type Drop Reinforced
OPGW S
Ground Wire
All-dielectric design
All-dielectric design
Operation temperature range down to -50°С
Operation temperature range down to -50°С
Reduced weight and size
Max rated design tension up to 700 N
Max rated design tension up to 3 kN
Flat Type Drop
Round Type Drop Tight-buffered
Round Type Drop
All-dielectric design
Cost-effective design
Reduced weight and size
Max rated design tension up to 1 kN
All-dielectric design
Cost-effective design
Reduced weight and size
Max rated design tension up to 2 kN
OPGW C
OPGW CA
OPGW/Ground Wire Hang me up on the wall
Up to 96 fibers
Aluminum alloy wires shield the high-voltage conductors from lightning strikes
Aluminum-clad steel wires are corrosion-resistant
Up to 96 fbersHighly corrosion-resistant: ACS wires and aluminum-clad stainless steel tube
Aluminum alloy wires shield the high-voltage conductors from lightning strikes
Up to 288 fibers
Aluminum alloy wires shield the high-voltage conductors from lightning strikes
Aluminum alloy wires provide conductivity for fault current
Aluminum-clad steel wires are corrosion-resistant
Highly corrosion-resistant: ACS wires and aluminum pipe
Aluminum-clad steel wires are corrosion-resistant
Mandatory element of 35 kV power lines approaching electrical substations and of all 110 kV power lines
Aluminum alloy wires shield the high-voltage conductors from lightning strikes
OPGW AP
Convenient splice preparation
Fire RatedFire Rated Dielectric
Fire Rated Outdoor
All-dielectric design
All-dielectric design
Remains functional under direct flame for at least 180 minutes
Up to 24 fibers
Excellent rodent resistance
Easy to install
Up to 288 fibers
Up to 24 fibers
Remains functional under direct flame for at least 180 minutes
Remains functional under direct flame for at leasr 180 minutes
Remains functional under direct flame for at least 180 minutes
Remains functional under direct flame for at least 180 minutes
Fire Rated Dielectric Light
Ducting SST
Fire Rated Universal
Fire Rated Universal Dielectric
Up to 96 fibers
Up to 144 fibers
Small size – thin, light, economical
All-dielectric design
Suitable for all applications
Suitable for all applications
Easy to install
Reduced weight and size. Low susceptibility to ice and wind loads
discover more at emcab.co
Sønder Felding, Denmark Perm,
Russia
Hawick, Scotland
Arlington, TX, the USA
Erfurt, Germany
SUPERIOR BLOWING SOLUTIONSand all types of optical cable
ABC-configuratorFirst-class quality
12-way:
24-way:
14-way:
7-way:
19-way:
8-way:
24-way HEX:
Configurator is a unique software tool designed for automatic
selection of the package solution for blowing technology. By choosing
necessary parameters, it will help you choose the optimal solution to
your requirements: applicable cable design, suitable tube and closure.
• cable that meets your requirements
and datasheet for it
• suitable tube diameter and datasheet
for it
• cable installation tips
• range of suitable closures with
datasheet for them
One-click complete solution package!
• cable application
• fiber count and size
• jacket type
• cable diameter
• tube size
2. You get:
1. Select necessary characteristics:
Our blowing tracks are customer specific and conform to IEC 60794-1-21:2015 Standard for Blowing test track:
Use our free software to select the complete
package for blowing technology
[email protected] emtelle.com
First-class production4 production sites.
First-class materials CORNING® SMF-28® ULTRA is in the
heart of Emcab’s cables.
Production sites Blowing tracks
linkedin.com
Emcab is a brand new optical cable manufacturer, operating all over the world with
headquarters in Erfurt, Germany and 4 production sites.
It is a joint venture between Emtelle and Incab.
Emtelle (www.emtelle.com) is a leading global manufacturer of pre-connectorised, blown
fiber cable, and ducted network solutions.
Incab (www.incab.co) is a leading worldwide optical cable manufacturer.
Now, those two industry leaders join forces by combining their expertise, energy and
innovation power to deliver full fiber cable solutions to customers through Emcab.
Together Emcab cables and Emtelle microduct solutions cover all customer needs.
Superior microducrts from Emtelle
Ducts configuration
Emtelle microducts are approved by the largest
network operators in the European market. With our
own test laboratories, test tracks and our solutions
team, we are ideally equipped to withstand the strict
requirements for micro tubes.
Microducts need to be made for their
intended environment. Emtelle doesn’t
just turn a material into a tube.
The technology behind simplicity is
the key to embrace the cable.
1-way: 2-way: 3-way:
With our Em-Liner which is extruded during the
manufacturing process, the friction between duct and
cable is reduced to a minimum and promises better
blowing results up to 50%. We carry out 10 different
quality checks on every microduct during and after
manufacture. Our strict tolerances promise the best
results. IEC standards are what Emtelle always looks to
exceed.
5-way: 6-way:4-way:
Emcabs air blown cables undergo regular approval tests at our
regional test tracks using our latest Manufacturing & Design
Technology.
Hawick
Sonder Felding
Perm
Test site characteristics:
• Route length up to 2000 m
• Cable diameter range: 2.5–16 mm
• Tube inner diameter: 4.0–20.0 mm
Test site characteristics:
• Route length up to 1350 m
This route consists of the two
following separate routes:
• 1250 m 50/4.6 mm subduct, multiple
micro ducts are thenblown in at the
same time
• 1550 m 50/4.6 mm subduct, multiple
micro ducts are then blown in at the
same time
Erfurt
• Route up to 50/4.6 mm coming soon
Watch the blowing test