dual-polarized panel antennas - bxd series
TRANSCRIPT
Slant +/- 45° Dual-Polarized, Dual-Band Directional Panel Antennas806-900 MHz & 1850-1990 MHz
Model Number Frequency Range(MHz) H-Plane E-Plane Gain Fixed Electrical
Downtilt OptionsLength x Width x Depth
(in inches)
BXD-40404080CF _ 806-900 MHz*1850-1990 MHz
40°40°
15°7°
14.5 dBd19.5 dBi
0°0° 48.0” x 36.0” x 10.0”
BXD-63206340CF _ 806-900 MHz*1850-1990 MHz
63°63°
30°14°
10 dBd15.5 dbi
0°0° 23.8” x 16.7” x 4.9”
BXD-63406380CF _ 806-900 MHz*1850-1990 MHz
63°63°
15°7°
13 dBd18 dBi
0°, 4°0°, 2°, 4° 47.4” x 16.8” x 3.5”
BXD-63606380CF _ 806-900 MHz*1850-1990 MHz
63°63°
11°7°
14.5 dBd18 dBi
0°0° 71.1” x 16.8” x 4.2”
BXD-90409080CF _ 806-900 MHz*1850-1990 MHz
90°90°
15°7°
11 dBd16.5 dBi
0°, 2°, 4°0°, 2°, 4° 47.2” x 16.5” x 7.5”
BXD-908090120CF _ 806-900 MHz*1850-1990 MHz
90°90°
7°5°
14 dBd18 dBi
0°0° 94.7” x 16.7” x 5.9”
BXD Series
The BXD (Broadband X-Pol Dual-Band) is a slant +/-45° panel antenna operating within the 806-900 MHz & 1850-1990 MHz dual-band frequency range. BXD’s are a design combination of our BXA-800 and BXA-1850 slant +/-45° panels. Antennas feature fixedelectrical downtilt and null fill. Optional diplexers and diplexer packages (CIJI kits) are available for use with BXD antennas.
Design and Construction of the BXD Panel:BXD antennas are manufactured with our exclusive 3T Technology, featuring single-piece, water-cut brass feedline assemblies forconsistent performance; a non-collinear system with access to each radiating element for control of the shaping of the vertical pat-tern; air as insulation for virtually no internal signal loss; fiberglass radomes and aircraft grade aluminum reflector plates for evenheat dissipation to minimize plate warping and bending.
Model Number Guide:
Amphenol Antel, Inc.
Model’s Currently Available:
BXD- 63 4 4 63 8 2 CF E-DIN
Connector TypeNE is an elongated N connectorE-DIN is an elongated DIN connector
CF refers to a “Center-Fed” connectorBF refers to a “Bottom-Fed” connector
Electrical Downtilt(Side 2: 1850-1990 MHz)
Number of Dipole Pairs(Side 2: 1850-1990 MHz)
Horizontal Beamwidth(Side 2: 1850-1990 MHz)
Electrical Downtilt(Side 1: 806-900 or 806-960 MHz)
Number of Dipole Pairs(Side 1: 806-900 or 806-960 MHz)
Horizontal Beamwidth(Side 1: 806-900 or 806-960 MHz)
*This model is also available up to 960 MHz. Consult your sales representative for details.When ordering replace “ __” with the connector type (NE or E-DIN).
Slant +/- 45° Dual-Polarized, Dual-Band Panel 40° / 40°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-40404080CF __
Revision Date: 7/12/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1220 mm 48.0 inWidth 915 mm 36.0 inDepth 254 mm 10.0 in
4) Weight 18.1 kg 40.0 lbs
Wind AreaFore/Aft 1.12 m2 12.0 ft2Side 0.31 m2 3.3 ft2
Rated Wind Velocity (Safety factor 2.0)>221 km/hr >137 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 1580 N 355.3 lbsSide 447 N 100.5 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Cannot mechanically downtilt
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 40°E-Plane 15°
1) Gain 14.5 dBd / 16.5 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 40°E-Plane 7°
1) Gain 17.5 dBd / 19.5 dBi1) Electrical Downtilt 0°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fedconnectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual-Polarized, Dual-Band Panel 63° / 63°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-63206340CF __
Revision Date: 10/23/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 604 mm 23.8 inWidth 424 mm 16.7 inDepthDepth with z-bracket
125165
mmmm
4.96.5
inin
4) Weight 5.6 kg 12.3 lbs
Wind AreaFore/Aft 0.256 m2 2.76 ft2Side 0.077 m2 0.826 ft2
Rated Wind Velocity (Safety factor 2.0)>614 km/hr >381 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 363 N 81.6 lbsSide 111 N 24.9 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 63°E-Plane 30°
1) Gain 10 dBd / 12 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 63°E-Plane 14°
1) Gain 13.5 dBd / 15.5 dBi1) Electrical Downtilt 0°
Impedance 50 ΩIsolation <-25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fed connectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual-Polarized, Dual-Band Panel 63° / 63°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-63406380CF __
Revision Date: 7/9/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1204 mm 47.4 inWidth 427 mm 16.8 inDepthDepth with z-bracket
89129
mmmm
3.55.1
inin
4) Weight 7.7 kg 17.0 lbs
Wind AreaFore/Aft 0.51 m2 5.5 ft2Side 0.11 m2 1.2 ft2
Rated Wind Velocity (Safety factor 2.0)>590 km/hr >367 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 731 N 164 lbsSide 177 N 40 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 63°E-Plane 15°
1) Gain 13 dBd / 15 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 63°E-Plane 7°
1) Gain 16 dBd / 18 dBi1) Electrical Downtilt 0°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5-15%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fed connectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual-Polarized, Dual-Band Panel 63° / 63°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-63406382CF __
Revision Date: 7/9/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1204 mm 47.4 inWidth 427 mm 16.8 inDepthDepth with z-bracket
89129
mmmm
3.55.1
inin
4) Weight 7.7 kg 17.0 lbs
Wind AreaFore/Aft 0.51 m2 5.5 ft2Side 0.11 m2 1.2 ft2
Rated Wind Velocity (Safety factor 2.0)>590 km/hr >367 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 731 N 164 lbsSide 177 N 40 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 63°E-Plane 15°
1) Gain 13 dBd / 15 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 63°E-Plane 7°
1) Gain 16 dBd / 18 dBi1) Electrical Downtilt 2°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5-15%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fed connectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual-Polarized, Dual-Band Panel 63° / 63°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-63446384CF __
Revision Date: 7/9/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1204 mm 47.4 inWidth 427 mm 16.8 inDepthDepth with z-bracket
89129
mmmm
3.55.1
inin
4) Weight 7.7 kg 17.0 lbs
Wind AreaFore/Aft 0.51 m2 5.5 ft2Side 0.11 m2 1.2 ft2
Rated Wind Velocity (Safety factor 2.0)>590 km/hr >367 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 731 N 164 lbsSide 177 N 40 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 63°E-Plane 15°
1) Gain 13 dBd / 15 dBi1) Electrical Downtilt 4°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 63°E-Plane 7°
1) Gain 16 dBd / 18 dBi1) Electrical Downtilt 4°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5-15%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fed connectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual Polarized, Dual-Band Panel 63° / 63°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-63606380CF __
Revision Date:7/10/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1804 mm 71.1 inWidth 427 mm 16.8 inDepthDepth with z-bracket
107147
mmmm
4.25.8
inin
4) Weight 12.7 kg 28.0 lbs
Wind AreaFore/Aft 0.77 m2 8.3 ft2Side 0.19 m2 2.1 ft2
Rated Wind Velocity (Safety factor 2.0)>463 km/hr >288 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 1094 N 245.9 lbsSide 334 N 75.2 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 63°E-Plane 11°
1) Gain 14.5 dBd / 16.5 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 63°E-Plane 7°
1) Gain 16 dBd / 18 dBi1) Electrical Downtilt 0°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5-15%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fedconnectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual Polarized, Dual-Band Panel 90° / 90°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-90409080CF __
Revision Date: 11/5/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1200 mm 47.2 inWidth 420 mm 16.5 inDepthDepth with z-bracket
190230
mmmm
7.59.1
inin
4) Weight 7.9 kg 17.5 lbs
Wind AreaFore/Aft 0.51 m2 5.4 ft2Side 0.23 m2 2.6 ft2
Rated Wind Velocity (Safety factor 2.0)>454 km/hr >282 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 715 N 161 lbsSide 350 N 79 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 90°E-Plane 15°
1) Gain 11 dBd / 13 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 90°E-Plane 7°
1) Gain 14.5 dBd / 16.5 dBi1) Electrical Downtilt 0°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fedconnectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual Polarized, Dual-Band Panel 90° / 90°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-90429082CF __
Revision Date: 11/5/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1200 mm 47.2 inWidth 420 mm 16.5 inDepthDepth with z-bracket
190230
mmmm
7.59.1
inin
4) Weight 7.9 kg 17.5 lbs
Wind AreaFore/Aft 0.51 m2 5.4 ft2Side 0.23 m2 2.6 ft2
Rated Wind Velocity (Safety factor 2.0)>454 km/hr >282 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 715 N 161 lbsSide 350 N 79 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 90°E-Plane 15°
1) Gain 11 dBd / 13 dBi1) Electrical Downtilt 2°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 90°E-Plane 7°
1) Gain 14.5 dBd / 16.5 dBi1) Electrical Downtilt 2°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fedconnectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual Polarized, Dual-Band Panel 90° / 90°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-90449084CF __
Revision Date: 11/5/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 1200 mm 47.2 inWidth 420 mm 16.5 inDepthDepth with z-bracket
190230
mmmm
7.59.1
inin
4) Weight 7.9 kg 17.5 lbs
Wind AreaFore/Aft 0.51 m2 5.4 ft2Side 0.23 m2 2.6 ft2
Rated Wind Velocity (Safety factor 2.0)>454 km/hr >282 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 715 N 161 lbsSide 350 N 79 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 90°E-Plane 15°
1) Gain 11 dBd / 13 dBi1) Electrical Downtilt 4°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 90°E-Plane 7°
1) Gain 14.5 dBd / 16.5 dBi1) Electrical Downtilt 4°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fedconnectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
Slant +/- 45° Dual Polarized, Dual-Band Panel 90° / 90°
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001Toll-Free (888) 417-9562 Fax. (815) 399-0156 [email protected] www.antelinc.com
BXD-908090120CF __
Revision Date:7/10/07
When ordering replace “___” with connector type.
This Amphenol Antel antenna is under a five-year limited warranty for repair or replacement.
Mechanical specificationsLength 2405 mm 94.7 inWidth 425 mm 16.7 inDepthDepth with z-bracket
150190
mmmm
5.97.5
inin
4) Weight 17 kg 37.0 lbs
Wind AreaFore/Aft 1.02 m2 11.0 ft2Side 0.36 m2 3.9 ft2
Rated Wind Velocity (Safety factor 2.0)>294 km/hr >183 mph
Wind Load @ 100 mph (161 km/hr)Fore/Aft 1491 N 335.2 lbsSide 631 N 141.8 lbs
Antenna consisting of aluminum alloy with brassfeedlines covered by a UV safe fiberglass radome.
Mounting and Downtilting:Mounting brackets attach to a pipe diameter ofØ50-160 mm (2.0-6.3 in).
Mounting bracket kit # 36210002Downtilt bracket kit # 36114003
Electrical specifications
1) Typical values.2) Power rating limited by connector only.3) NE indicates an elongated N connector.
E-DIN indicates an elongated DIN connector.4) The antenna weight listed above does not include
the bracket weight.Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
Patented Dipole Design: U.S. Patent No. 6,608,600 B2
Cel
lula
r Si
de
Frequency Range 806-900 MHz*1) Half Power Angle
H-Plane 90°E-Plane 7°
1) Gain 14 dBd / 16 dBi1) Electrical Downtilt 0°
PCS
Side
Frequency Range 1850-1990 MHz1) Half Power Angle
H-Plane 90°E-Plane 5°
1) Gain 16 dBd / 18 dBi1) Electrical Downtilt 0°
Impedance 50 ΩIsolation -25 dB
3) Connectors NE or EDIN4 ports / center
1) VSWR ≤ 1.4:1Polarization Slant +/- 45°
2) Power Rating - CellularPower-Rating - PCS
500 W250 W
1) Null Fill 5-15%Lightning Protection Direct Ground
*Also available up to 960 MHz. Consult your salesdirector for more information.
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Radiation pattern1)Cellular - 806-900 MHz
Horizontal
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
806-900 MHz & 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Horizontal
Radiation pattern1)PCS - 1850-1990 MHz
0
10
20
30
40
50 60
70 80 90100110120
130
140
150
160
170
180
-170
-160
-150
-140
-130-120
-110 -100 -90 -80 -70-60
-50
-40
-30
-20
-10
5101520253035
Vertical
Watercut brass feedline assembly for consistent performance
Unique feedline design eliminates the needfor conventional solder joints in the signalpath.
A non-collinear system with access toevery radiating element for broad band-width and superior performance.
Air as insulation for virtually no internal signal loss.
Amphenol Antel’sExclusive 3T (TrueTransmission LineTechnology)Antenna Design:
Antenna available with center-fedconnectors only.
Radiation patterns for all antennas are measuredwith the antenna mounted on a fiberglass pole.
Mounting on a metal pole will typically improvethe Front-to-Back ratio.
CF Denotes a Center-FedConnector.
1300 Capital Drive Rockford, IL 61109 Toll-Free (888) 417-9562 Tel. (815) 399-0001 Fax. (815) 399-0156 Email: [email protected] www.antelinc.com
Mounting & Downtilt Bracket Kits
BXD Bracket Kits Part Number Bracket Type
36210002 Standard BXD Mounting Bracket Kit for: BXD-40404080CF BXD-63206340CF BXD-63406380CF BXD-63606380CF BXD-90409080CF BXD-908090120CF 36114003 Standard BXD *Downtilt Bracket Kit for: BXD-63206340CF BXD-63406380CF BXD-63606380CF BXD-90409080CF BXD-908090120CF
*Both the downtilt bracket kit and the standard mounting bracket kit must be
ordered for mechanical downtilt applications.
Mounting Bracket Kits are sold separately and not included in the price of antennas.
R
WA
ANTE
NN
A
R
WA
ANTE
NN
A
36210002 Top View Side View
36114003 Top View Side View