dual-band cell phone signal solution for homes · supports all 2g and 3g standards quality metal...
TRANSCRIPT
![Page 1: Dual-band Cell Phone Signal Solution for Homes · Supports all 2G and 3G standards Quality metal construction, durable and resilient ... may not consent to the use of this device](https://reader031.vdocuments.mx/reader031/viewer/2022022506/5ac11a427f8b9a1c768c76e6/html5/thumbnails/1.jpg)
SureCall.Inc | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
SureCall EZBoost 3GDual-band Cell Phone Signal Solution for Homes
EZBoost 3G | 1-5-15 v1.0
Independently reconfigurable for each band
Dual Embedded CPU for smarter technology
Stealth technology incorporated – uplink becomes dormant when not in use, providing green, power saving operation FCC certified for new regulations and technical standards
Auto Gain Control (AGC) and manually adjustable dB gain and attenuation
Automatic shut down
Supports all 2G and 3G standards
Quality metal construction, durable and resilient
Lowest Out of Band Emissions (OOBE)to date
Key Features:
》See page 2 for specifications and installation diagram
2G-3G Home Cell Reception Solution
EZBoost 3GTM
Overview
Designed for home use, the EZBoost 3G is the perfect solution for homes where the reception is weak due to distance from cell towers, topography or building materials. Easy to install, without the need to add a roof antenna, the EZBoost 3G provides improved cellular reception for multiple users. As with all SureCall products the EZBoost 3G comes with our three-year warranty.
Unique Features
• Doesn't require professional installation• Built in safeguards completely eliminate interference to cell tower• FCC approved for use with all major U.S carriers• All-in-one, low cost solution• Easy installation• Industry’s best three-year warranty – Approved by all major US carriers – Simple, Plug and Play operation
Booster Kit Includes:
The standard EZBoost 3G Kit (SC-DualEZH-72-Kit) includes: the EZBoost booster with built-in antenna, SureCall's low dB loss 240 coax cable and an indoor desktop antenna.
![Page 2: Dual-band Cell Phone Signal Solution for Homes · Supports all 2G and 3G standards Quality metal construction, durable and resilient ... may not consent to the use of this device](https://reader031.vdocuments.mx/reader031/viewer/2022022506/5ac11a427f8b9a1c768c76e6/html5/thumbnails/2.jpg)
Specifications
Model No. EZBoost 3G
Uplink Frequency Range (MHz): 824-849 / 1850-1910
Downlink Frequency Range (MHz): 869-894 / 1930-1990
Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Input/Output Impedance: 50 ohm
Maximum Gain: 65dB - Cellular / 72dB - PCS
Noise Figure: 7dB
VSWR:
AC Power Transmitter: Input AC 110-240V, 50/60 Hz
Maximum Output Power: 1Watt EIRP
Cable: SC-240-50NN (50 feet)
RF Connectors: N male on both ends
Power Consumption: <10W
Dimensions: 11.42" x 9.1" x 2.76"
Weight: 2lb 13oz.
FCC ID (USA): RSNEZBOOST
≤2.0
Installation Example
TM
2G-3G Home/Cell Reception Solution
EZBoost 3G
Specifications are subject to change. Specifications contained within apply only to products meeting the latest FCC Certification Guidelines of 2/20/2013.
This is a CONSUMER device.BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.You MUST operate this device with approved antennas and cables as specified by the manufactur-er. Antennas MUST be installed at least 20 cm (8 inches) from any person.You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Booster
Antenna