DTP SYSTEMS

DTP T USW 333

The Extron DTP T USW 333 switcher provides signal extension for up to

three sources, sending HDMI or analog video, audio, and control

up to 330  feet (100  meters) over a shielded CATx cable to Extron

DTP™ 330‑enabled products. The HDCP‑compliant switcher includes

several integrator‑friendly features in a low profile enclosure that enables

discreet installation in a wide variety of applications.

LONG DISTANCE THREE INPUT SWITCHER WITH INTEGRATED

DTP TRANSMITTER

A Transmits HDMI or analog video, control, and analog audio up to 330 feet (100 meters) over a shielded CATx cable

A Two HDMI inputs and one VGA input

A Auto-switching between inputs

A Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance

A Bidirectional RS-232 and IR pass-through for AV device control

A Remote power capability

A HDCP compliant

A Supported HDMI specification features include data rates up to 6.75 Gbps, 3D, and HD lossless audio formats

A EDID Minder®

A Audio input assignment

A Compatible with all DTP 330 Series receivers and DTP 330-enabled products

A 1" (2.5 cm) high, half rack width metal enclosure

A Highly reliable, energy-efficient external universal power supply included

FEATURESDESCRIPTION

POWER12V

2--A MAX

Rx GTx RxTxG

RS-232 IR

RxTx

1

RGB HDMI HDMI

SIG LINK

DTP OUT

AUDIO CONTACT RS-232TALLY

3

1 2 3 G 1 2 3 +V

RESET

INPUTS

OVER DTP REMOTE

50-60 Hz

100-240V ~ 2.0 A MAX

1L RSIG LINK

OUT

SIG LINK

OUT

1 3 4 4

XTP RS-232 IR

Tx Rx RTS CTSG Tx Rx G Tx Rx G

RS-232 IR

Tx Rx Tx RxG

Tx Rx G

Tx Rx Tx Rx

XTP RESETS/PDIF

OUT

DTP

XTP

DTP

XTP

DTPEXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

LAN 2

LAN 1

LAN 3HDBTGDTPHDBT

2

1 2 3 4 5 7 86

DTP

CR

OSS

PO

INT

84 4

CLASS 2 WIRING

8 /

R

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TPREMOTE

SIG LINK

IN

SIG LINK

IN

AU

DIO

INP

UT

S

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

CO

NT

RO

L 1 2 3 4 G

DIGITAL I/OCOM 3COM 2COM 1

S

DM

P E

XPA

NS

ION

SG G

11 22 C 3 4 C

INP

UT

S

-S G+S+V

PWR OUT = 6W

OU

TP

UT

S

RS-232 IR

Tx Rx Tx RxG1

L R1

L R3

L R3

L R5

L R

2L R 4L R 2L R 4L R6L R

IR/SERIAL eBUSRELAYS

OUTPUTS

AUDIO

Tx Rx G Tx Rx

RS-232 IR

OVER DTP

OUTPUTS

AUDIO

Tx Rx G Tx Rx

RS-232 IR

OVER DTP

OUTPUTS

AUDIO

Tx Rx G Tx Rx

RS-232 IR

OVER DTP

OUTPUTS

AUDIO

Tx Rx G Tx Rx

RS-232 IR

OVER DTP

Help SystemOff

Display

RoomControl

Off

Mute

Screen

Lighting December 15, 2013 - 7:58 AM AudioControl

Volume

Mute

Tuner 1 2 3VCRLaptop PC DVDDocCam

TunerOn

Channel

Last

Presets

MorePresets

321

654

987

Enter0

Extron Extron

Displays

Laptop Laptop

MacBook Pro

Extron DTP HDMI 4K 330 D RxReceiver

RS-232HDMI

CATx Cable up to 230' (70 m)

CATx Cable up to 330' (100 m)

CATx Cable up to 330' (100 m)

RS-232HDMI

VGA

Audio

HDMIHDMI

Extron DTP HDMI 4K 230 D RxReceiver

Ethernet

Ethernet

AudioAudio

ExtronDTP T USW 333Transmitter Inputs

Outputs

AV Control Network

Microphones

Extron DTP CrossPoint 84 IPCP SAScaling Presentation Matrix Switcher with DTP Extension and Control Processor

ExtronSM 26SurfaceMountSpeakers

ExtronTLP Pro 1020T10" Tabletop TouchLink Pro Touchpanel

A Transmits HDMI or analog video, control, and analog audio up to 330 feet (100 meters) over a shielded CATx cable

A Two HDMI inputs and one VGA input

A Auto-switching between inputs – Auto‑switching allows for simple, unmanaged installation in locations such as in a podium or under a conference table. When multiple inputs are active, the switching priority is configurable.

A Supports computer and video resolutions up to 1920x1200, including 1080p/60 and 2K

A Compatible with CATx shielded twisted pair cable

A Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance

A Audio input assignment – The analog audio input can be assigned to any video input, or it can be set to follow the input switch.

A Supports multiple embedded audio formats

A Bidirectional RS-232 and IR pass-through for AV device control

A Remote power capability

A Digital conversion of analog input signals

A HDCP compliant

A Supported HDMI specification features include data rates up to 6.75 Gbps, 3D, and HD lossless audio formats

A EDID Minder automatically manages EDID communication between connected devices

A RS-232 control port

A Contact closure remote control with tally output – Allows for remote selection of an input channel, while a tally output provides +5 VDC to light an LED to indicate the currently selected input.

A Compatible with all DTP 330 Series receivers and DTP 330-enabled products

The Extron DTP T USW 333 is a three input switcher for sending HDMI or analog video, audio, and control up to 330 feet (100 meters) over a shielded CATx cable to Extron DTP 330‑enabled products. It is HDCP compliant and provides two HDMI inputs, one VGA input, and one DTP twisted pair output. The DTP T USW 333 supports video signals at resolutions up to 1920x1200, including 1080p/60 and 2K. Analog video signals are digitized to ensure a high quality digital video signal is transmitted to the DTP 330 receiver. The switcher offers many integrator‑friendly features, such as EDID Minder, auto‑switching between inputs, audio input assignment, and remote powering. These features, plus the low profile enclosure, make the DTP T USW 333 ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.

The DTP T USW 333 provides reliable switching and long distance transmission of HDMI and analog video signals. The DTP T USW 333 can automatically switch between the digital and analog sources, plus it supports RS‑232 and contact closure remote control with tally output for easy operation in unmanaged locations. In addition, the analog audio input can be assigned to any of the three video inputs, or it can be set to follow the input switch.

To enhance and simplify integration, the DTP T USW 333 features EDID Minder, an Extron‑exclusive technology that manages EDID communication between the display device and input sources to ensure that the correct video formats are displayed reliably.

The switcher supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. For added installation flexibility, the DTP T USW 333 transmitter can be remotely powered over the shielded twisted pair cable by a DTP 330‑enabled product. This simplifies installation and allows both devices to share one power supply. The DTP T USW 333 can be integrated with an Extron DTP CrossPoint® 84 Presentation Matrix Switcher to support sources at remote locations.

DTP CrossPoint 84 IPCP MA 70DTP CrossPoint 84 IPCP SA

IN1606 IPCP SA IN1608 IPCP MA 70

COMPATIBLE WITH ALL EXTRON DTP SYSTEMS PRODUCTS

DTP CrossPoint 84 IPCP8x4 Scaling Presentation Matrix Switchers with DTP Extension and Control

The Extron DTP CrossPoint® 84 is a 4K, 8x4 matrix switcher with HDMI

and DTP twisted pair inputs and outputs, scaling, an integrated audio

power amplifier, comprehensive audio DSP, and a built‑in IPCP Pro 350

control processor. The DTP CrossPoint 84 provides complete system

integration in a 2U enclosure, for applications with multiple displays,

sound reinforcement, and AV system control. It supports local and

remote sources and displays with six HDMI inputs and two DTP inputs,

plus two HDMI outputs and two DTP outputs. DTP extension allows

connection to DTP endpoints, plus XTP® matrix switchers. Each DTP

output also includes independent scaling up to 1080p and 2K. Full audio

optimization is available with an integrated Extron ProDSP™ digital matrix

processor, which can be linked to an additional Extron DSP for AEC and

I/O expansion.

Features

• All‑in‑one 8x4 4K matrix switcher, scaler, audio DSP, audio power amplifier, and control processor

• Two DTP inputs and six HDMI inputs• Two HDMI outputs and two independently scaled DTP outputs• Supports 4K signals at all inputs and on both HDMI outputs• Integrated DTP inputs and outputs support transmission of video, control,

and audio up to 330 feet (100 meters) over a shielded CATx cable• Compatible with DTP 230 Series and DTP 330 Series, plus XTP CrossPoint

matrix switchers• Remote powering of DTP transmitters and receivers• HDMI audio embedding and de‑embedding• Integrated digital audio matrix processor with ProDSP 32/64‑bit signal

processing• Digital audio expansion port provides interfacing to an Extron DMP 128

processor for AEC and audio system scalability• Four mic/line inputs with 48 volt phantom power• Energy efficient Class D stereo or mono amplifier• Rack‑mountable 2U, full rack width metal enclosure

Model Version Description Part NumberDTP CrossPoint 84 IPCP Preamp Output, w/o Amplifier and Control Processor 60-1368-01DTP CrossPoint 84 IPCP SA 2 x 50 Watt Stereo Amp 60-1368-12DTP CrossPoint 84 IPCP MA 70 100 Watt 70 Volt Mono Amp 60-1368-13

Model Version Description Part NumberDTP CrossPoint 84 IPCP SA 2 x 50 Watt Stereo Amp with LinkLicense 60-1368-12ADTP CrossPoint 84 IPCP MA 70 100 Watt 70 Volt Mono Amp with LinkLicense 60-1368-13A

IN1608 IPCPEight Input HDCP-Compliant Scaling Presentation Switcher with DTP Extension and Control

The Extron IN1608 is an HDCP‑compliant scaling presentation switcher

with four HDMI inputs, two universal analog video inputs, and two Extron

DTP inputs. It provides dual HDMI outputs and one DTP output. The DTP

inputs and output work with DTP endpoints to extend HDMI, audio, and

bidirectional control signals up to 330 feet (100 meters) over a shielded

CATx cable. The IN1608 provides the convenience of supporting local

and remote sources and displays, with fast and reliable source switching,

and a high performance scaling engine for HDMI and analog sources. The

IN1608 also includes a host of audio switching and processing features.

The IN1608 IPCP includes a built‑in Class D audio power amplifier, and an

IPCP Pro 350 control processor for complete AV system control.

Features

• Integrates HDMI, analog video, and audio sources into presentation systems

• Two DTP inputs, four HDMI inputs, and two universal analog video inputs• Three simultaneous video outputs• Integrated DTP inputs and output support transmission of HDMI, control,

and audio up to 330 feet (100 meters) over a shielded CATx cable• Remote powering of DTP transmitters and receiver• Compatible with all DTP Series models, and DTP‑enabled products• Integrated IPCP Pro 350 control processor• Two mic/line inputs with 48 volt phantom power• Mic ducking• HDMI audio embedding and de‑embedding• Energy efficient Class D stereo or mono amplifier

Model Version Description Part NumberIN1608 IPCP SA Control Processor and Stereo Power Amp 60-1238-12IN1608 IPCP MA 70 Control Processor and 70 V Mono Amp 60-1238-13

Model Version Description Part NumberIN1608 IPCP SA Control Proc, Stereo Amp, Link License 60-1238-12AIN1608 IPCP MA 70 Control Proc, 70 V Mono Amp, Link License 60-1238-13A

WORLDWIDE SALES OFFICES

www.extron.com

Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City

Par is • London • Frank fur t • Stockholm • Amersfoor t • Moscow • Duba i • Johannesburg • Te l Av iv

Sydney • Melbourne • New Delh i • Banga lore • S ingapore • Seou l • Shangha i • Be i j ing • Tok yo

© 2015 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.

SPECIFICATIONS

03‑201568‑2804‑01REV. ALetter ‑ English ‑ NP

VIDEO

VGABandwidth 170 MHz (-3 dB)HDMIMaximum data rate 6.75 Gbps (2.25 Gbps per color)Maximum pixel clock 165 MHzResolution range Up to 1920x1200 or 1080p @ 60 Hz; 2kStandards DVI 1.0, HDMI, HDCP 1.1, CEA-861E

VIDEO INPUT — HDMI

Number/signal type 2 HDMI inputs (or single link DVI-D with the appropriate DVI-HDMI adapters)

Connectors 2 female HDMI type A

VIDEO INPUT — VGA

Number/signal type 1 VGA-QXGA; RGBHVConnectors 1 female 15-pin HDNOTE: The VGA input is digitized and output as DTP. The VGA signal is not scaled.

SYNC — VGA

Input type RGBHV, bi-level and tri-level syncInput level 1.9 V to 5.0 Vp-pS/N >90 dB at maximum input (unweighted)Max. input voltage 5.0 Vp-p

INTERCONNECTION BETWEEN TRANSMITTER AND RECEIVER

Number/signal type 1 DTP 330 outputConnector 1 female RJ-45Termination standard TIA/EIA T568BTransmission distance Up to 330' (100 m) using shielded twisted pair cable or

XTP DTP 24 STP cableCable requirements Solid conductor, 24 AWG or betterCable recommendations 400 MHz bandwidth, STP (shielded twisted pair)NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

AUDIO

Gain Unbalanced output: 0 dB; balanced output +6 dBFrequency response 20 Hz to 20 kHz, ±0.5 dBTHD + Noise 0.01% @ 1 kHz at nominal levelS/N >90 dB, at maximum input (unweighted)Crosstalk <-45 dB @ 20 kHz, or -72 dB @ 1 kHz or belowStereo channel separation >80 dB @ 1 kHz to 20 kHz

AUDIO INPUT

Number/signal type 1 analog stereo, unbalanced or 2-digital audio, embedded in the HDMI

NOTE: Analog audio is not embedded onto the digital video signal.Connectors 1 female 3.5 mm mini stereo jack

2 female HDMI type A (shared with video input)Source formatsHDMI LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby

Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

Analog Analog stereo audio

AUDIO OUTPUT

Number/signal type 1 analog audio over DTP signal, or 1 embedded digital audio over DTP signal

Connectors 1 RJ-45 jack

COMMUNICATIONS — SWITCHER

Serial control port RS-232 via (1) 3.5 mm, 3 pole captive screw connectorTally port (1) 3.5 mm, 4 pole captive screw connectorContact closure remote control (1) 3.5 mm, 4 pole captive screw connectorUSB control port 1 front panel female mini USB, type BUSB standards USB 2.0, high speedProgram control Extron Simple Instruction Set (SIS™)

COMMUNICATIONS — RS-232/IR OVER DTP

NOTE: Protocol is mirrored between the connected DTP 330 Rx and the Over DTP output port. Signals from a control device pass into the Over DTP port, are embedded with the DTP signal, and sent to the DTP 330 Rx endpoint for control of remote sink and source devices. The Over DTP port is a pass-through connection to the DTP endpoint. There is no RS-232 or IR insertion from the DTP T USW 333 control port to the Over DTP port.Serial control pass-through port 1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw

connectorBaud rates 300 to 38400 baudIR pass-through control port TTL level (0 to 5 V) modulated infrared control from

30 kHz up to 60 kHz

GENERAL

Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts

Power consumptionDevice 5.5 wattsDevice and power supply 7.2 wattsNOTE: The DTP T USW 333 can be powered either locally by the external power supply or remotely by a receiver on the other end of the twisted pair cable.Cooling Convection, vents on top and sidesMountingRack mount Yes, with optional 1U high rack shelfFurniture mount Yes, with optional under-desk mounting kitEnclosure type MetalEnclosure dimensions 1.0" H x 8.75" W x 6.0" D (half rack wide)

(2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.)

Product weight 0.6 lbs (0.3 kg)Vibration ISTA 1A in carton (International Safe Transit Association)Regulatory complianceSafety CE, c-UL, ULEMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCIEnvironmental Complies with the appropriate requirements of RoHS,

WEEENOTE: **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.

Model Version Description Part numberDTP T USW 333 Three Input Switcher w/ DTP Tx - 330 feet (100 m) 60-1329-52

For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.