dtp t usw 233 - extron electronicsmedia.extron.com/download/files/brochure/dtptusw233… · ·...
TRANSCRIPT
HDMI
DTP T USW 233
The Extron DTP T USW 233 switcher provides signal extension for up to
three sources, sending HDMI or analog video, audio, and control up to
230 feet (70 meters) over a single CATx cable to a DTP 230 twisted pair
receiver. This HDCP-compliant switcher includes several integrator-friendly
features, and delivers superior image quality by maintaining the digital signal
path throughout the system.
THREE INPUT SWITCHER WITH INTEGRATED DTP TRANSMITTER
A Transmits HDMI or analog video, control, and analog audio up to 230 feet (70 meters) over a single CATx cable
A Two HDMI inputs and one RGBHV or component video input
A Auto-switching between inputs
A Compatible with CAT 5e, CAT 6, and CAT 7 twisted pair cable
A Bidirectional RS-232 and IR pass-through for AV device control
A Remote power capability
A HDCP compliant
A Supported HDMI specification features include data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
A EDID Minder®
A Audio input assignment
A Compatible with all DTP 230 Series receivers and DTP 230-enabled products
A 1" (2.5 cm) high, half rack width metal enclosure
A Energy-efficient external universal power supply included
FEATURESDESCRIPTION
POWER
12V
2
--A MAX
Rx
G
Tx
RxTx
G
RS-232 IR
RxTx
1
RGB, Y, R
-Y, B-Y
HDMI
HDMI
SIG
LINK
DTP OUT
AUDIO
CONTACT
RS-232
TALLY
3
12
3G
12
3+V
RESET
INPUTS
OVER DTP
REMOTE
Tx Rx GTx
RxRS-232
IROVER DTPOUTPUTS
AUDIO
1
31
42
31
42
31
42
2
3
100
LINK
ACT
COM
IR
INPUTRELAY
TXRX
R
IPL 250
®
ON
OFF
DISPLAY
MUTE
SCREEN
UP
SCREEN
DOWN
VCR
DVD
DOC
CAM
LAPTOP
PC
ExtronDTP T USW 233DTP Transmitter
Laptop
Laptop
Document Camera
TCP/IP
AV Device Control
Switcher Control
VGA
HDMI
HDMI
TouchLinkControl System
CATx CableUp to 230' (70m)
Extron DTP HDMI 230 D RxReceiver
HDMI with Embedded Audio
Flat Panel Display with Speakers
AV Device Control
A Transmits HDMI or analog video, control, and analog audio up to 230 feet (70 meters) over a single CATx cable
A Two HDMI inputs and one RGB or component video input
A Auto-switching between inputs – Auto-switching allows for simple, unmanaged installation in locations such as in a podium or under a conference table. When multiple inputs are active, the switching priority is configurable.
A Supports computer-video to 1920x1200, including HDTV 1080p/60 Deep Color and 2K
A Compatible with CAT 5e, CAT 6, and CAT 7 twisted pair cable
A Extron XTP DTP 24 Shielded Twisted Pair cable provides added protection from outside interference and ensures high quality signal transmission
A Bidirectional RS-232 and IR pass-through for AV device control
A Remote power capability
A Digital conversion of analog input signals
A HDCP compliant
A Supported HDMI specification features include data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
A EDID Minder automatically manages EDID communication between connected devices
A Supports multiple embedded audio formats
A Audio input assignment – The analog audio input can be assigned to any video input, or it can be set to follow the input switch.
A RS-232 control port
A Contact closure remote control with tally output – Allows for remote selection of an input channel, while a tally output provides +5 VDC to light an LED to indicate the currently selected input.
A Compatible with all DTP 230 Series receivers and DTP 230-enabled products
The Extron DTP T USW 233 is a three input switcher for sending HDMI or analog video, audio, and control up to 230 feet (70 meters) over a single CATx cable to an Extron DTP 230 receiver. It is HDCP compliant and provides two HDMI inputs, one RGBHV or component video input, and one DTP 230 twisted pair output. The DTP T USW 233 supports computer-video to 1920x1200, including 1080p/60 Deep Color and 2K. Analog signals are digitized to ensure a high quality digital video signal is transmitted to the DTP 230 receiver. The switcher also offers many integrator-friendly features, such as EDID Minder, auto-switching between inputs, audio input assignment, and remote powering. These features plus the low profile enclosure make the DTP T USW 233 ideal for discreet placement in lecterns, beneath tables, or in other locations.
The DTP T USW 233 provides reliable switching and transmission of HDMI signals, supporting Deep Color up to 12-bit and embedded HD lossless audio formats. For simplified operation, the DTP T USW 233 can automatically switch between the digital and analog sources. In addition, the analog audio input can be assigned to any of the three video inputs, or it can be set to follow the input switch.
To enhance and simplify integration of sources and displays, the DTP T USW 233 features EDID Minder. EDID Minder is an Extron-exclusive technology that manages EDID communication between the display device and input sources to ensure that the correct video formats are displayed reliably.
The switcher supports simultaneous transmission of bidirectional RS-232 and IR signals from a control system, providing remote control to source equipment or remote displays. For added installation flexibility, a single external power supply can be used to remotely power either the DTP T USW 233 transmitter or a DTP 230 receiver over the twisted pair cable. This simplifies installation and allows both devices to share one external power supply.
COMPATIBLE WITH ALL EXTRON DTP 230 PRODUCTS
DTP HDMI 230 RxDTP DVI 230 Rx
DTP DVI 230 D RxDTP HDMI 230 D Rx
DTP 230 Series ReceiversHDMI and DVI Twisted Pair Extenders
• Receives HDMI or single link DVI-D plus control and analog audio up to 230 feet (70 meters) over a single CATx cable
• Supports computer-video to 1920x1200, including HDTV 1080p/60 Deep Color and 2K
• Compatible with CAT 5e, CAT 6, CAT 7, and Extron XTP DTP 24 twisted pair cable
• Accepts additional analog stereo audio signals and outputs balanced and unbalanced audio
• Bidirectional RS-232 and IR pass-through for AV device control• Remote power capability• UL 2043 plenum rated receiver• 1" (2.5 cm) high, quarter rack width metal enclosure
DTP 230 Decora Series ReceiversHDMI and DVI Twisted Pair Extenders - Decora® Wallplate
• Same capabilities as the rack-mountable DTP 230 Series receivers• The Decora-style wallplate offers an elegant point of connection that blends
well within the presentation space• Offers increased system design flexibility and reduces hidden boxes• Discreet mounting capability within walls, furniture, or behind displays• Enables mixing and matching with desktop and wallplate transmitters to
meet application requirements• Mounts in an included two-gang Decora-style wallplate
Model Version Description Part NumberDTP HDMI 230 Rx HDMI Receiver 60-1271-13DTP DVI 230 Rx DVI Receiver 60-1272-13
Model Version Description Part NumberDTP HDMI 230 D Rx HDMI Decora Receiver - Black 60-1215-22DTP HDMI 230 D Rx HDMI Decora Receiver - White 60-1215-23DTP DVI 230 D Rx DVI Decora Receiver - Black 60-1214-22DTP DVI 230 D Rx DVI Decora Receiver - White 60-1214-23
MPS 602Media Presentation Switcher with DTP Extension
• Integrates HDMI, RGB, and audio sources into presentation systems• One DTP 230 twisted pair input, three HDMI inputs, and two RGB inputs• Selectable HDMI or DTP 230 output• Integrated DTP 230 input and output support transmission of HDMI or
DVI, control, and analog audio up to 230 feet (70 meters) over a single CATx cable
• Compatible with all DTP 230 transmitters and receivers• Remote powering of DTP 230 transmitter and receiver• Bidirectional RS-232 and IR insertion for AV device control• HDCP compliant• Mic/line input with 48 volt phantom power• Mic ducking• Available with energy efficient Class D stereo or mono amplifier
IN1608Eight Input HDCP-Compliant Scaling Presentation Switcher with DTP Extension
• Integrates HDMI, HDTV, RGB, video, and audio sources into presentation systems
• Two DTP 230 twisted pair inputs, four HDMI inputs, and two universal analog video inputs
• Three simultaneous video outputs• Integrated DTP 230 inputs and output support transmission of video, control,
and audio up to 230 feet (70 meters) over a single CATx cable• Compatible with all DTP 230 transmitters and receivers• Remote powering of DTP transmitters and receiver• Two mic/line inputs with 48 volt phantom power• Mic ducking• Available with energy efficient Class D stereo or mono amplifier
Model Version Description Part NumberMPS 602 Variable Preamp Output - No Amplifier 60-1313-01MPS 602 SA 2 x 50 Watt Stereo Power Amplifier 60-1314-01 MPS 602 MA 100 Watt 70 Volt Mono Power Amplifier 60-1315-01
Model Version Description Part NumberIN1608 Standard Version 60-1238-01IN1608 SA 2 x 50 Watt Stereo Power Amplifier 60-1238-02IN1608 MA 100 Watt 70 Volt Mono Power Amplifier 60-1238-03
© 2013 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.
Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is • London • Frank fur t
Amersfoor t • Moscow • Duba i • Johannesburg • New Delh i • Banga lore • S ingapore • Seou l • Shangha i • Be i j ing • Tok yo
UNITED STATES EUROPE ASIA MIDDLE EAST
Worldwide Sales Of�ces
+800.633.9876Inside USA/Canada
+1.714.491.1500
+800.3987.6673Inside Europe
+31.33.453.4040
+800.7339.8766Inside Asia
+65.6383.4400
+971.4.299.1800
SPECIFICATIONS
12-201368-2500-01 REV. A2Letter - English - NP
VIDEOVGAGain UnityBandwidth 350 MHz (-3 dB)HDMIMaximum data rate 6.75 Gbps (2.25 Gbps per color)Maximum pixel clock 165 MHzResolution range Up to 1920x1200 or 1080p @ 60 Hz; 12-bit color, 2k
VIDEO INPUT — HDMINumber/signal type 2 HDMI inputs (or single-link DVI-D with the appropriate
DVI-HDMI adapters)Connectors 2 female HDMI type A
VIDEO INPUT — VGANumber/signal type 1 VGA-QXGA; RGBHV; RGBS; Y, R-Y, B-YConnectors 1 female 15-pin HDNOTE: The VGA input is digitized and output as DTP. The VGA signal is not scaled.
INTERCONNECTION BETWEEN TRANSMITTER AND RECEIVERNumber/signal type 1 DTP 230 outputConnector 1 female RJ-45Termination standard TIA/EIA T568BTransmission distance Up to 230' (70 m) using CAT 5e/6/6a/7 cable or
XTP DTP 24 TP cableCable requirements Solid conductor, 24 AWG or betterCable recommendations 400 MHz bandwidth, STP (shielded twisted pair)NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
AUDIO INPUTNumber/signal type 1 analog stereo, unbalanced or
2-digital audio, embedded in the HDMIConnectors 1 female 3.5 mm mini stereo jack
2 female HDMI Type A (shared with video input)Source formatsHDMI LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby
Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Analog Analog stereo audio
AUDIO OUTPUTNumber/signal type 1 analog audio over DTP signal, or
1 embedded digital audio over DTP signalConnectors 1 RJ-45 jack
CONTROL/REMOTE — SWITCHERSerial control port RS-232 via (1) 3.5 mm, 3 pole captive screw connectorTally port (1) 3.5 mm, 4 pole captive screw connectorContact closure remote control (1) 3.5 mm, 4 pole captive screw connectorUSB control port 1 front panel female mini USB, type BUSB standards USB 2.0, high speedProgram control Extron Simple Instruction Set (SISTM)
CONTROL/REMOTE — (RS-232/IR OVER DTP)NOTE: Protocol is mirrored between the connected DTP 230 Rx and the Over DTP output port. Signals from a control device pass into the Over DTP port, are embedded with the DTP signal, and sent to the DTP 230 Rx endpoint for control of remote sink and source devices. The Over DTP port is a pass-through connection to the DTP endpoint. There is no RS-232 or IR insertion from the DTP T USW 233 control port to the Over DTP port.Serial control pass-through port 1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw
connectorIR pass-through control port TTL level (0 to 5 V) modulated infrared control from
30 kHz up to 60 kHz
GENERALPower supply External
Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 3 A, 12 watts
NOTE: The DTP T USW 233 can be powered either locally by the external power supply or remotely by a receiver on the other end of the twisted pair cable.Cooling Convection, no ventsMountingRack mount Yes, with optional 1U high rack shelfFurniture mount Yes, with optional under-desk mounting kitEnclosure type MetalEnclosure dimensions 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight 0.6 lbs (0.3 kg)Vibration ISTA 1A in carton (International Safe Transit Association)Regulatory complianceSafety CE, c-UL, ULEMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCIEnvironmental Complies with the appropriate requirements of RoHS,
WEEENOTE: **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.
Model Version Description Part numberDTP T USW 233 Three Input Switcher with DTP Transmitter 60-1329-12
For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.